NORTON BEVELSYSTEMS A REVOLUTION IN BEVELLING AND ROUNDING

NORTON BEVELSYSTEMS A REVOLUTION IN BEVELLING AND ROUNDING

NORTON BEVELSYSTEMS New Norton NorBevel-6 and NorBevel-2 machines are a revolution in bevelling and rounding metal! Norton now offers two new machine ranges, compact and ergonomic, electric and the pneumatic to make bevelling and rounding metal easier, faster, more accurate and more cost effective. The NorBevel concept has been designed for heavy-duty bevelling and radius work, bevelling up to a depth of 2 mm. FOR BEVELLING, NORBEVEL PROVIDES: BETTER WORKING CONDITIONS Lightweight and almost vibration-free. The chips are large enough to immediately drop to the ground. No hazardous dust particles and/or combustion gases are released. A MORE CONSISTENT AND ACCURATE ANGLE NorBevel-6 and NorBevel-2 machines provide a more consistent and accurate angle to the metal for a stronger welded joint. SPEED AND FLEXIBILITY Approximately.2m of bevelling can be done in one minute. In a matter of seconds the machine can be adjusted and the bevel heads replaced. NO FINISHING AND NO DISCOLORATION A perfect end result straight away, without finishing. Discoloration is prevented through reduced-sparking that adds hardly any heat to the material. A MACHINE QUALITY FINISH WITHOUT CONTAMINATION A better quality weld joint is created through reduced encapsulation of impurities in the weld, as NorBevel does not contaminate the metal. FOR ROUNDING, NORBEVEL PROVIDES: UNIFORM QUALITY A larger bonding surface is created for paint and coatings due to the uniform radius. Cable feed glands are no longer required to prevent chafing when feeding through cables, wiring and/or piping. SPEED AND FLEXIBILITY Rounding small openings from a of 8 mm is easy due to the compact and lightweight machine design. Rounding metal now has an unprecedented degree of flexibility. A QUALITY FINISH Only with NorBevel you can quickly achieve high levels of constant quality when rounding metal. 02

THE NORTON NORBEVEL-2 RANGE The NorBevel 2 models have been designed for heavy duty bevelling and radius work, bevelling up to a depth of 2 mm. Both the EBA-2 and ABA-2 models have powerful motors, adjustable heads for adapting bevelling depth, and come in a convenient travel case with adaptor. The electric version, EBA-2 has a variable speed switch for greater control. NORBEVEL EBA-2 ELECTRIC NORBEVEL-2 ELECTRIC (EBA-2) Part no. 662607700 Electric 2 mm R2, R3, R4, R5, R6, R8 Bevel angle 5-22,5-30 - 37,5-45 - 60 Air pressure - Air consumption -.53kw Voltage 230 V / 20 V 0.500 rpm 4,5 kg Bevel head with depth adjustment Variable speed setting 4 mm NORBEVEL ABA-2 PNEUMATIC NORBEVEL-2 PNEUMATIC (ABA-2) Part no. 662607706 Pneumatic 2 mm R2, R3, R4, R5, R6, R8 Bevel angle 5-22,5-30 - 37,5-45 - 60 Air pressure 6 bar Air consumption 00 ltr / min 2 PK /,48kw Voltage - 0.000 rpm 5,66 kg Bevel head with depth adjustment Safety lever 4 mm 03

HEADS FOR NORBEVEL-2 (ELECTRIC AND PNEUMATIC) Premium heads for Plasma / Laser-cut steel and Stainless steel 662636479 R2 662636480 R3 662646202 R4 8mm 662652485* R5 662652487* R6 662652489* R8 662646203 5 662646204* 22,5 662646205 30 662646206* 37,5 8mm 662636503 45 662646207* 52,5 662646209* 60 66264620 5 6626462* 22,5 66264622 30 66264625* 37,5 2mm 66264626 45 66264629* 52,5 662646220* 60 Replace the cutting head in seconds! 04 Recommended maximum cut depth is 4mm per pass. * MTO item Steel 662607707 R2 662607799 R3 8mm 66260780 R4 662607802 5 662607804* 22,5 662607805 30 662607806* 37,5 8mm 662607809 45 66264642* 52,5 6626078* 60 66260782 5 662607840* 22,5 66260784 30 662607843* 37,5 2mm 662607844 45 66264644* 52,5 662607845* 60 Aluminium, plastic, brass and all soft metals 6626338 R2 6626339 R3 66263320 R4 8mm 662652479 R5 662652482 R6 662652484 R8 6626465* 5 66264662* 22,5 6626332 30 66264664* 37,5 8mm 66263323 45 66264665* 52,5 66264666* 60 66264667* 5 66264668* 22,5 66264669 30 66264670* 37,5 2mm 6626467 45 66264672* 52,5 66264673* 60 * MTO item * MTO item

THE NORTON NORBEVEL-6 RANGE For lighter bevelling and rounding to a depth of 6 mm, the NorBevel-6 machines are compact, maneuverable, and available in two super light weight models, with electric and pneumatic motors. The Premium version can be used for more precise depth adjustment of 0. mm. Spindle lock for a lighter and quicker change of NorBevel heads, only one allen key is required. BEST NORBEVEL EBI-6 ELECTRIC PREMIUM NORBEVEL-6 ELECTRIC (EBI-06) Premium Part no. 662626777 Electric 6 mm R2, R3, R4 Bevel angle 5-22,5-30 - 37,5-45 - 60 Air pressure - Air consumption - 500 W Voltage 230 V / 20 V.000 rpm 2,0 kg Variable speed settings Easy to adjust cutting depth 22 mm GOOD NORBEVEL EBI-6 ELECTRIC NORBEVEL-6 ELECTRIC (EBI-06) Part no. 662607846 Electric 6 mm R2, R3, R4 Bevel angle 5-22,5-30 - 37,5-45 - 60 Air pressure - Air consumption - 500 W Voltage 230 V / 20 V.000 rpm,6 kg Variable speed settings Easy to use 22 mm 05

BEST NORBEVEL ABIS-6 PNEUMATIC PREMIUM NORBEVEL-6 PNEUMATIC (ABIS-06) Premium Part no. 662629888 Pneumatic 6 mm R2, R3, R4 Bevel angle 5-22,5-30 - 37,5-45 - 60 Air pressure 6 bar Air consumption 30 ltr / min 8 PK / 0.38 kw Voltage - 25.000 rpm, kg Safety lever Easy to adjust cutting depth and replace cutting head 22 mm GOOD NORBEVEL EBI-6 PNEUMATIC NORBEVEL-6 PNEUMATIC (ABIS-06) Part no. 662607847 Pneumatic 6 mm R2, R3, R4 Bevel angle 5-22,5-30 - 37,5-45 - 60 Air pressure 6 bar Air consumption 30 ltr / min 8 PK / 0.38 kw Voltage - 25.000 rpm 0.8 kg Safety lever Easy to use 22 mm 06

HEADS FOR NORBEVEL-6 Premium heads for Plasma / Laser-cut steel and Stainless steel 662636486 R2 662636502 R3 6mm 66264674 R4 66264675 5 66264678* 22,5 66264679 30 66264680* 37,5 6mm 662636504 45 6626468* 52,5 66264682* 60 Steel 66260785 R2 662607852 R3 6mm 662607853 R4 662607854 5 662607855* 22,5 662607856 30 662607857* 37,5 6mm 662607858 45 6626464* 52,5 662607859* 60 * MTO item * MTO item Aluminium, plastic, brass and all soft metals 66263306 R2 66263309 R3 6mm 6626330 R4 66264645* 5 66264646* 22,5 662633 30 66264647* 37,5 6mm 6626332 45 66264649* 52,5 66264650* 60 * MTO item Replace the cutting head in seconds! Recommended maximum cut depth is 4mm per pass. 07

Saint-Gobain Abrasifs European Headquarters Rue de l Ambassadeur - B.P.8 78 702 Conflans Cedex France Tel: +33 (0) 34 90 40 00 Fax: +33 (0) 39 9 89 56 www.nortonabrasives.com Norton is a registered trademark of Saint-Gobain Abrasives. Form # 3208