Specifications are subject to change without notice
A member of the TSUBAKI GROUP nylon open style standard widths Light, quiet all-rounder with wide range of applications* Cost-effective cable carrier Weight-optimized chain geometry Particularly high torsional rigidity Universal Mounting Brackets (UMB) witntegratable strain relief comb Robust, double stroke system for long unsupported lengths Very quiet thanks to internal noise dampening system Favorable ratio of inner cavity space to outer width Single-part, non-opening chain links (design 020) Designs witnward or outward opening framestays Single-part mounting bracket witntegratable strain relief comb Etremely fast and easy to open due to ball joint hinge mechanism Built-in lateral wear surfaces Simple divider positioning and fastening Many separation options for the cables with cavity height etender frame stay The etended height frame stay can be used to reliably route cables with a very large diameters, such as vaccuum hoses, which are large and require more cavity space than the standard frame stay allows Dividers can be fied for installations where the carrier is operating on its side and applications with high transverse/lateral accelerations Lateral wear surfaces for long service life for applications where the carrier is gliding on its side Simple fiing of strain relief comb or C-Rail in the connector ** Some features can be different for certain types for design reasons Our specialists are happy to advise you Specifications are subject to change without notice Need help? 1-800-443-4216 or wwwkabelschleppcom 01
GENERAL DATA Total Machine Travel (L S ) E V A 7 CONOMIC ALUE DDED A product group s EVA score is a general indicator that allows a customer to quickly and easily compare a product group s basic price, features, capabilities and value relative to other comparably sized products within the KS product range Download 3D CAD files, videos, updated product info & much more at: wwwkabelschleppcom/unifleadvhtm Dimensions in inches (mm) Technical Data 1320 Design 020 Option A Option B Option C Option D Option E Option F Mounting Height H 323 (82) 402 (102) 480 (122) 693 (176) 890 (226) 1087 (276) How To Order 1-800-443-4216 Bend Radius 110 (28) 189 (48) 295* (75)* 394* * 492* * Retracted H Depot U B 286 (73) 326 (83) 367 (93) 472 (120) 571 (145) 669 (170) * special order, available upon request U B Loop Length 598 (152) 724 (184) 846 (215) 1181 (300) 1492 (379) 1799 (457) C L Additional Load Fied End 70 56 42 27 14 Etended Etended Travel: When application travel eceeds the self-supporting length of the carrier, carrier systems are designed to glide on themselves in a guide channel Moving End t = Link Pitch 1320 126 (32) Calculation of Chain Length L S = total machine travel = 314 (2 t safety factor) L K = chain length required L K = LS 2 length of the curve ( )* * Assumes the Fied Point is located at the Center of the Total Machine Travel Self-Supporting Lengths lbs ft kg m 84 12 10 8 6 4 2 Type 1320 02O non-opening frame stay 0 Unsupported 164 328 492 656 820 984 1148 ft Length 05 10 15 20 25 30 35 m For more information on etended travel systems, see pages 0227-0 Number of Systems Req Carrier Type Carrier Design Cavity Width Bend (Bi ) Radius # of Links Length Type & Position Brackets Dividers (#vert / #horz) 15 1320 020 038 028 72 Links FA/MU 2v/1h 02 Specifications are subject to change without notice
A member of the TSUBAKI GROUP nylon open style standard widths 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 83 Design 020 - non-opening links 1320 1320020038 asic-line_uniflex_advanced_a5_usa11qd7 9/27/11 Chain 12:56 Weight: PM Page 86 027 lbs/ft 029 lbs/ft Type 1320 (040 kg/m) (043 kg/m) 100 079 100 (255) (20) Divider system TS 0 (Type 1320) (255) Type S T inches (mm) inches (mm) 1320 079 (20) 244 008 (2) The dividers can be moved in the (62) cross section UNIFLEX Advanced nside eights 20 44 Types, and 1320 Cavity Partitioning Options: Strain relief devices for plastic connectors Type S T S in (mm) in (mm) ZLK H in (mm) L 1320 079 (20) 008 (2) 009 (24) The sdividers T can be moved in the cross section ZLK A Connecting elements witntegrated strain relief combs on both sides (ZLK A) 1320020050 Connecting elements with screw-on type strain relief combs (ZLK L) s H 079 (20) 020 non-opening link design In the standard version, the divider systems are mounted on every second chain link s T In he In w 2 nside idths 25 250 kabelschleppde Fon: 49 2762 4003-0 Use our free ct planning service In the standard version, the divider systems are mounted on every second chain link Divider system TS 0 (Type 1320) Type inches (mm) 1320 079 (20) 008 (2) The dividers can be moved in the cross section Cable carrier Type 1320 Mounting Bracket Options: Specifications are subject to change without notice S T inches (mm) Eample of ordering 030 100 Design width B i in mm 125 Bend radius in mm - In the standard version, the divider systems are mounted on every second chain link 1332 Chain length L k in mm (without connection) Divider system TS 0 Divider system Number of dividers n T Connection FU/MU Connection Fied point/ Driver Ordering divider systems: Please state the designation of the divider system (TS 0, TS 1 ) and the number of dividers Possibly attach a sketch with the dimensions Subject to change Divider system TS 1 (Type 1320) with continuous height subdivision made of aluminum Type in (mm) S T in (mm) S H in (mm) 1320 079 (20) 008 (2) 009 (24) The dividers can be moved in the cross section Connection dimensions for Type 1320 Connecting elements with strain relief combs on one side ZLK A Type B i integrated strain relief combs Eample of ordering B k n Z L k l 1 24 (6) The dimensions of the fied end and moving end brackets are identical 16 (4) 26 (65) 28 (7) 209 (53) The strain relief combs are generally supplied with the connecting elements The combs are either clipped to the end connectors and bolted together with them, or screwed on at the desired intervals by using additional boreholes, behind the connecting elements 91 (23) / 1320 38 016 Cable carrier (4) 030 100 125 Type Design width Bend radius B i in mm in mm Need help? 1-800-443-4216 or wwwkabelschleppcom 03 3 - s H In the standard version, the divider systems are mounted on every second chain link Chain length L k in mm (without connection) Ordering divider systems: Please Short state brackets the designation without of the divider system (TS 0, TS 1 ) and the number of dividers Possibly attach a sketch with the dimensions strain relief are also available for restricted installation conditions Please contact us 1332 Divider system TS 0 Divider system / 3 Number of dividers n T Connection FU/MU Connection Fied point/ Driver
GENERAL DATA Total Machine Travel (L S ) E V A 7 CONOMIC ALUE DDED A product group s EVA score is a general indicator that allows a customer to quickly and easily compare a product group s basic price, features, capabilities and value relative to other comparably sized products within the KS product range Download 3D CAD files, videos, updated product info & much more at: wwwkabelschleppcom/unifleadvhtm Dimensions in inches (mm) Technical Data Retracted H U B C L Fied End Etended Moving End t = Link Pitch 179 (455) Calculation of Chain Length L S = total machine travel = 314 (2 t safety factor) L K = chain length required L K = LS 2 length of the curve ( )* * Assumes the Fied Point is located at the Center of the Total Machine Travel Design 030/040 Mounting Height H Bend Radius Depot U B Loop Length 030 Opens to the outside radius Option A 551 (140) 205 (52) 457 (116) 1000 (254) Option B Option C 654 (166) 890 (226) 256 (65) 374 (95) 508 (129) 626 (159) 1161 (295) 1535 (389) 040 Opens to the inside radius Option D Option E Option F Option G Option H 1126 (286) 1323 (336) 1559 (396) 1717 (436) 1913 (486) How To Order 1-800-443-4216 492 591 (150) 709 (180) 787 (200) 886 (225) 744 (189) 843 (214) 961 (244) 1 (264) 1138 (289) 1906 (484) 2213 (562) 2587 (656) 2835 (719) 3142 (798) Additional Load 70 56 42 27 14 Self-Supporting Lengths lbs ft kg m 84 12 10 8 6 4 2 Type 0 Unsupported 164 328 492 656 820 984 1148 ft Length 05 10 15 20 25 30 35 m Etended Travel: When application travel eceeds the self-supporting length of the carrier, carrier systems are designed to For more information on glide on themselves in a etended travel systems, guide channel see pages 0227-0 Number of Systems Req Carrier Type Carrier Design Cavity Width Bend (Bi ) Radius # of Links Length Type & Position Brackets Dividers (#vert / #horz) 20 030 8 180 90 Links FH/MH 3v/0h 04 Specifications are subject to change without notice
kabelschleppde (19) Bi BEF = 075 (95) 037 Bi - Bi (2) 008 ø (55) 022 071 (18) 142 BASIC LINE UNIFLEX Advanced Selection 20 44 A member of the TSUBAKI GROUP nylon open style standard widths Design 030 - opens on the outside radius Design 040 - opens on the inside radius 030025 049 lbs/ft (073 kg/m) 142 030038 050 lbs/ft (075 kg/m) 142 098 (25) 161 (41) 102 102 030 h open B style design has hinged-opening bars that open from either side of the outside radius for easy cable and/or hose installation and service 040025 049 lbs/ft (073 kg/m) 142 040038 050 lbs/ft (075 kg/m) 142 161 (41) 098 (25) 213 (54) 102 102 040 open style design has hinged-opening bars that open from either side of the inside radius for easy cable and/or hose installation and service 030058 054 lbs/ft (080 kg/m) 142 213 (54) 228 (58) 102 040058 054 lbs/ft (080 kg/m) 142 291 (74) 228 (58) 102 0308 059 lbs/ft (088 kg/m) 142 291 (74) 3 (78) 102 0408 059 lbs/ft (088 kg/m) 142 370 (94) 3 (78) 102 030103 066 lbs/ft (098 kg/m) 142 370 (94) 406 (103) 469 (119) 102 040103 066 lbs/ft (098 kg/m) 142 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 84 469 (119) 405 (103) 102 Mounting Brackets For drawings and dimensions of available mounting bracket options: See pages 12-14 heights (52) ø (59) 232 (19) BEF = Bi 075 Bi (95) 037 Universal mounting brackets and, Types Assembly options (59) 232 Lk = l1 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 89 you can easily connect the UNIFLEX from above, Brackets), Mounting (Universal UMBs plastic With from below, or from the front of the bracket widths 250 25 UNIFLEX * at min = 016 in for Bi =, 228, 3, 406 at min = for Bi = 098 Need help? 1-800-443-4216 or * wwwkabelschleppcom 05 at min = (4 mm) for Bi =, (58), (78), (103) at min = (5 mm) for Bi = (25) UNIFLEX Selection BASIC LINE UNIFLEX Advanced heights Cavity Partitioning 250 For drawings and dimensions of available cavity partitioning Divider system TS 0 options: See pages 10-11 kabelschleppde n: 20 44 widths 25 4003-0 Types, and Fiing of the dividers In the standard version, dividers or the complete Fied dividers are available for applications with divider system (dividers with height separation) can transverse accelerations and where the carrier is be moved in the cross section (Version A) rotated 90 for side mound operation (Version B) If the fied installation version is desired, please state this on the order Version A (Standard) Version B Divider movable Divider fied in 25 mm steps With fied dividers, fiing is by means of arresting cams in the foot of the divider Locking profile in the crossbar Divider with arresting cams Version A Version B min a Type S T a T min a min S T a T min a section 102 008 014 028 008 016/* 030 010 (20) (35) (7) (20) (4/5)* (75) (25) 010 010 010 (25) (50) (25) (25) 012 (30) (50) 012 (30) s T Design 20 with non-opening links also available Perfect for use with surging, high-pressure 010 (25) hoses Special order - consult factory
GENERAL DATA Total Machine Travel (L S ) E V A 7 CONOMIC ALUE DDED A product group s EVA score is a general indicator that allows a customer to quickly and easily compare a product group s basic price, features, capabilities and value relative to other comparably sized products within the KS product range Download 3D CAD files, videos, updated product info & much more at: wwwkabelschleppcom/unifleadvhtm Dimensions in inches (mm) Technical Data Retracted H U B C L Fied End Etended Moving End t = Link Pitch 219 (555) Calculation of Chain Length L S = total machine travel = 314 (2 t safety factor) L K = chain length required L K = LS 2 length of the curve ( )* * Assumes the Fied Point is located at the Center of the Total Machine Travel Design 030/040 Mounting Height H Bend Radius Depot U B Loop Length 030 Opens to the outside radius Option A 693 (176) 248 (63) 567 (144) 1217 (309) Option B Option C 827 (210) 984 (250) 315 (80) 394 634 (161) 713 (181) 1425 (362) 1673 (425) 040 Opens to the inside radius Option D Option E Option F Option G 1181 (300) 1457 (370) 1772 (450) 2008 (510) How To Order 1-800-443-4216 492 630 (160) 787 (200) 906 (230) 811 (206) 949 (241) 1106 (281) 1224 (311) 1984 (504) 2417 (614) 2913 (740) 3283 (834) Additional Load lbs ft kg m 84 12 70 56 42 27 Self-Supporting Lengths 10 8 6 4 Type 14 2 0 Unsupported 164 328 492 656 820 984 1148 ft Length 05 10 15 20 25 30 35 m Etended Travel: When application travel eceeds the self-supporting length of the carrier, carrier systems are designed to For more information on glide on themselves in a etended travel systems, guide channel see pages 0227-0 Number of Systems Req Carrier Type Carrier Design Cavity Width Bend (Bi ) Radius # of Links Length Type & Position Brackets Dividers (#vert / #horz) 8 040 125 125 53 Links FU/MU 3v/1h 06 Specifications are subject to change without notice
kabelschleppde (19) Bi BEF = 075 (95) 037 Bi - Bi (2) 008 ø (55) 022 071 (18) 142 BASIC LINE UNIFLEX Advanced Selection 20 44 A member of the TSUBAKI GROUP nylon open style standard widths Design 030 - opens on the outside radius Design 040 - opens on the inside radius 030050 076 lbs/ft (113 kg/m) 268 (68) 030 h open B style design has hinged-opening bars that open from either side of the outside radius for easy cable and/or hose installation and service 040050 076 lbs/ft (113 kg/m) 268 (68) 040 open style design has hinged-opening bars that open from either side of the inside radius for easy cable and/or hose installation and service 0305 083 lbs/ft (123 kg/m) 295 (75) 0405 083 lbs/ft (123 kg/m) 366 (93) 295 (75) 366 (93) 030100 089 lbs/ft (132 kg/m) 394 040100 089 lbs/ft (132 kg/m) 465 (118) 394 465 (118) 030125 095 lbs/ft (142 kg/m) 030150 101 lbs/ft (151 kg/m) 492 563 (143) 591 (150) 040125 095 lbs/ft (142 kg/m) 040150 101 lbs/ft (151 kg/m) 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 84 563 (143) 492 661 (168) 591 (150) Mounting Brackets For drawings and dimensions of available mounting bracket options: See pages 12-14 heights Specifications are subject to change without notice (52) ø (59) 232 (19) BEF = Bi 075 Bi (95) 037 661 (168) Universal mounting brackets and, Types Assembly options (59) 232 Lk = l1 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 89 you can easily connect the UNIFLEX from above, Brackets), Mounting (Universal UMBs plastic With from below, or from the front of the bracket widths 250 25 UNIFLEX * at min = 016 in for Bi =, 228, 3, 406 at min = for Bi = 098 Need help? 1-800-443-4216 or * wwwkabelschleppcom at min = (4 mm) for Bi =, (58), (78), (103) at min = (5 mm) for Bi = (25) UNIFLEX Selection BASIC LINE UNIFLEX Advanced heights Cavity Partitioning 250 For drawings and dimensions of available cavity partitioning Divider system TS 0 options: See pages 10-11 kabelschleppde n: 20 44 widths 25 4003-0 Types, and Fiing of the dividers In the standard version, dividers or the complete Fied dividers are available for applications with divider system (dividers with height separation) can transverse accelerations and where the carrier is be moved in the cross section (Version A) rotated 90 for side mound operation (Version B) If the fied installation version is desired, please state this on the order Version A (Standard) Version B Divider movable Divider fied in 25 mm steps With fied dividers, fiing is by means of arresting cams in the foot of the divider Locking profile in the crossbar Divider with arresting cams Version A Version B min a Type S T a T min a min S T a T min a section 102 008 014 028 008 016/* 030 010 (20) (35) (7) (20) (4/5)* (75) (25) 010 010 010 (25) (50) (25) (25) 012 (30) (50) 012 (30) s T Design 20 with non-opening links also available Perfect for use with surging, high-pressure 010 (25) hoses Special order - consult factory
GENERAL DATA Total Machine Travel (L S ) E V A 7 CONOMIC ALUE DDED A product group s EVA score is a general indicator that allows a customer to quickly and easily compare a product group s basic price, features, capabilities and value relative to other comparably sized products within the KS product range Download 3D CAD files, videos, updated product info & much more at: wwwkabelschleppcom/unifleadvhtm Dimensions in inches (mm) Technical Data Retracted H U B C L Fied End Etended Moving End t = Link Pitch 262 (665) Calculation of Chain Length L S = total machine travel = 314 (2 t safety factor) L K = chain length required L K = LS 2 length of the curve ( )* * Assumes the Fied Point is located at the Center of the Total Machine Travel Design 030/040 Mounting Height H Bend Radius Depot U B Loop Length Option A 827 (210) 295 (75) 677 (172) 1453 (369) Option B Option C 1024 (260) 1181 (300) 394 472 (120) 776 (197) 854 (217) 1764 (448) 2008 (510) Shown with optional Frame Stay Height Etenders installed Option D Option E Option F Option G 1339 (340) 1811 (460) 2205 (560) 2598 (660) How To Order 1-800-443-4216 551 (140) 787 (200) 984 (250) 1181 (300) 933 (237) 1169 (297) 1366 (347) 1563 (397) 2256 (573) 3000 (762) 3618 (919) 4 (16) Additional Load lbs ft 84 70 56 42 27 14 Self-Supporting Lengths kg m 12 10 8 6 4 2 Type 0 Unsupported 164 328 492 656 820 984 114 ft Length 05 10 15 20 25 30 35 m Etended Travel: When application travel eceeds the selfsupporting length of the carrier, UNIFLEX carrier systems are designed to glide on themselves in a guide channel For more information on etended travel systems, see pages 0227-0 Number of Systems Req Carrier Type Carrier Design Cavity Width Bend (Bi ) Radius # of Links Length Type & Position Brackets Dividers (#vert / #horz) 50 030 125 140 38 Links FA/MA 3v/2h 08 Specifications are subject to change without notice
kabelschleppde (19) Bi BEF = 075 (95) 037 Bi - Bi (2) 008 ø (55) 022 071 (18) 142 BASIC LINE UNIFLEX Advanced Selection 20 44 283 (72) 295 (75) 382 (97) 394 480 (122) 492 579 (147) 591 (150) 677 (172) 689 (175) 776 (197) 787 (200) 874 (222) 886 (225) 972 (247) 984 (250) 1071 (272) A member of the TSUBAKI GROUP nylon open style standard widths Design 030 - opens on the outside radius Design 040 - opens on the inside radius 030050 112 lbs/ft (167 kg/m) 0305 121 lbs/ft (180 kg/m) 030100 129 lbs/ft (192 kg/m) 030125 138 lbs/ft (206 kg/m) 030150 146 lbs/ft (218 kg/m) 030175 155 lbs/ft (231 kg/m) 030 163 lbs/ft (243 kg/m) 030225 lbs/ft (257 kg/m) 030250 181 lbs/ft (270 kg/m) Mounting Brackets For drawings and dimensions of available mounting bracket options: See pages 12-14 heights (52) ø (59) 232 (19) BEF = Bi 075 Bi (95) 037 Universal mounting brackets and, Types Assembly options (59) 232 Lk = l1 030 open style design has hinged-opening bars that open from either side of the outside radius for easy cable and/or hose installation and service 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 89 you can easily connect the UNIFLEX from above, Brackets), Mounting (Universal UMBs plastic With from below, or from the front of the bracket widths 250 25 UNIFLEX 040050 112 lbs/ft (167 kg/m) 0405 121 lbs/ft (180 kg/m) 040100 129 lbs/ft (192 kg/m) 040125 138 lbs/ft (206 kg/m) 040150 146 lbs/ft (218 kg/m) 040175 155 lbs/ft (231 kg/m) 040 163 lbs/ft (243 kg/m) 040225 lbs/ft (257 kg/m) 040250 181 lbs/ft (270 kg/m) * at min = 016 in for Bi =, 228, 3, 406 at min = for Bi = 098 Need help? 1-800-443-4216 or * wwwkabelschleppcom 09 at min = (4 mm) for Bi =, (58), (78), (103) at min = (5 mm) for Bi = (25) UNIFLEX Selection BASIC LINE UNIFLEX Advanced heights Cavity Partitioning 250 For drawings and dimensions of available cavity partitioning Divider system TS 0 options: See pages 10-11 kabelschleppde n: 20 44 widths 25 4003-0 02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 84 283 (72) 382 (97) 295 (75) 480 (122) 394 Types, and Fiing of the dividers In the standard version, dividers or the complete Fied dividers are available for applications with divider system (dividers with height separation) can transverse accelerations and where the carrier is be moved in the cross section (Version A) rotated 90 for side mound operation (Version B) If the fied installation version is desired, please state this on the order Version A (Standard) Version B Divider movable Divider fied in 25 mm steps With fied dividers, fiing is by means of arresting cams in the foot of the divider Locking profile in the crossbar Divider with arresting cams s T 579 (147) 492 Version A Version B min a Type S T a T min a min S T a T min a section 102 008 014 028 008 016/* 030 010 (20) (35) (7) (20) (4/5)* (75) (25) 010 010 010 (25) (50) (25) (25) 012 (30) (50) 012 (30) 677 (172) 591 (150) 776 (197) 689 (175) 874 (222) 787 (200) 972 (247) 886 (225) 1071 (272) 984 (250) 040 open style design has hinged-opening bars that open from either side of the inside radius for easy cable and/or hose installation and service Design 20 with non-opening links also available Perfect for use with surging, high-pressure 010 (25) hoses Special order - consult factory
,, and Cavity Partitioning Options: Fiing of the dividers In the standard version, dividers or the complete divider system (dividers with height separation) can be moved in the cross section (Version A) Version A (Standard) Divider movable Fied dividers are available for applications with transverse accelerations and where the carrier is rotated 90 for side mound operation (Version B) If the fied installation version is desired, please state this on the order Version B Divider fied in 25 mm steps With fied dividers, fiing is by means of arresting cams in the foot of the divider Divider system TS 0 Version A Locking profile in the crossbar Divider with arresting cams Version B Type S T a T min a min S T a T min a min a section 102 008 (20) 014 (35) 028 (7) 008 (20) 016/* (4/5)* 030 (75) 010 (25) 010 (25) (50) 010 (25) 010 (25) 012 (30) (50) 012 (30) 010 (25) * a T min = 016 in for B i =, 228, 3, 406 a T min = for B i = 098 * a T min = (4 mm) for B i =, (58), (78), (103) a T min = (5 mm) for B i = (25) s T Divider system TS 1 for Design 030/040 with continuous height subdivision made of aluminum a T a a T Version A Version B Type S T a T min a min S T a T min a min a section S H h 1 h 2 102 008 (20) 014 (35) 028 (7) 008 (20) 016/* (4/5)* 010 (25) 010 (25) 012 (30) 012 (30) * a T min = 016 in for B i =, 228, 3, 406 a T min = for B i = 098 * a T min = (4 mm) for B i =, (58), (78), (103) a T min = (5 mm) for B i = (25) 030 (75) 010 (25) 010 (25) 010 (25) 008 (2) 016 055 (4) (14) 016 055 110 (4) (14) (28) hi s H 4 2 1 h 1 h 2 s T 3 5 10 Specifications are subject to change without notice
A member of the TSUBAKI GROUP nylon open style standard widths Divider system TS 3 with section subdivision, partitions made of plastic Type S T a T min a min S H h 1 h 2 102 031 (8) 014 (35) 028 (7) 009 (24) 009 047 (24) (12) 016 055 (40) (14) The dividers are fied by the partitions, the complete divider system is movable 110 (28) s T s H 4 2 1 3 5 In the standard version, the divider systems are mounted on every second chain link h 1 h 2 Dimensions of the plastic partitions for TS 3 a SZ For type, aluminum partitions in 1 mm width increments are available Types and S Z 009 (24) Type S Z 016 (4) 059 (15) 063 (16) 252 (64) 079 (20) 071 (18) 268 (68) a (Center to center distance, dividers) 098 118 138 157 177 217 256 295 (25) (30) (35) (40) (45) (55) (65) (75) a (Center to center distance, dividers) 091 110 126 130 169 (23) (28) (32) (33) (43) 3 315 346 378 441 (78) (80) (88) (96) (112) 189 (48) 228 (58) Need help? 1-800-443-4216 or wwwkabelschleppcom 11
02_03_Basic-Line_UNIFLEX_Advanced_A5_USA11qd7 9/27/11 12:56 PM Page 87,, and Standard Mounting Bracket Options: Connection dimensions for Type Connecting elements with strain relief combs on both sides ZLK A ZLK L Type B i B k n Z integrated screwable 098 161 25 (25) (41) 2 strain relief combs strain relief combs 213 38 (54) 3 228 291 58 (58) (74) 4 3 370 78 L k l (78) (94) 6 1 L k l 1 406 469 103 024 024 (103) (119) 8 (62) (62) schlepp 012 (3) 055 (14) 165 (42) 2 (525) 028 (7) 055 (14) Bi- For chain width B i = 098 inches (25 mm) Bi 063 (16) Bi Bichlepp nz 014 (35) 055 (14) 165 (42) 215 (545) 057 (145) 016 (4) 063 (16) Bi Bi For chain width B i = - 406 inches (38 103 mm) The dimensions of the fied end and moving end bracket are identical Connection dimensions for Type Connecting elements with strain relief combs on both sides Subject to change ZLK L screwable strain relief combs Lk l1 028 (7) The dimensions of the fied end and moving end bracket are identical nz 025 (64) 059 (15) 213 (54) 258 (655) Connection dimensions for Type Connecting elements with strain relief combs on both sides ZLK L screwable strain relief combs L k l 1 028 (7) 079 (20) Bi - Bi 071 (18) The dimensions of the fied end and moving end bracket are identical nz 031 (8) 033 (84) 081 (205) 293 (745) 079 (20) Bi - Bi Bi 087 (22) Bi Type B i B k n Z 50 268 (68) 4 75 295 (75) 366 (93) 6 100 394 465 (118) 8 125 492 563 (143) 10 150 591 (150) 661 (168) 12 For chain width Bi = 354 (90 mm) mounting brackets made of steel are available Type B i B k n Z 50 283 (72) 4 75 295 (75) 382 (97) 6 100 394 480 (122) 8 125 492 579 (147) 10 150 591 (150) 677 (172) 12 175 689 776 (175) (197) 14 200 797 (200) 874 (222) 16 225 886 (225) 972 (247) 18 250 984 (250) 1071 (272) 20 12 Specifications are subject to change without notice
A member of the TSUBAKI GROUP nylon open style standard widths Strain relief devices for plastic connectors ZLK A Connecting elements witntegrated strain relief combs on both sides (ZLK A) ZLK L Connecting elements with screw-on type strain relief combs (ZLK L) The strain relief combs are generally supplied with the connecting elements The combs are either clipped to the end connectors and bolted together with them, or screwed on at the desired intervals by using additional boreholes, behind the connecting elements Types, and Connection variants Connection point FK FH MH MK FI Fied point FA (Standard) MA (Standard) MI Driver M F Driven End Fied End Connection type A Mounting surface outside (standard) I Mounting surface inside H Mounting surface, rotated 90 to the outside K Mounting surface, rotated 90 to the inside In the standard version, the brackets are mounted with the mounting surface on the outside radius (FA/MA) When ordering please specify the desired bracket type and configuration The mounting bracket configuration can subsequently be altered simply by varying the bracket position Need help? 1-800-443-4216 or wwwkabelschleppcom 13
,, and Universal Mounting Bracket (UMB) Options: Universal mounting brackets With plastic UMBs (Universal Mounting Brackets), you can easily connect the UNIFLEX from above, from below, or from the front of the bracket UNIFLEX ø (52) Lk l 1 = 232 (59) Assembly options 037 Bi (95) BEF = Bi 075 (19) 071 (18) 142 232 (59) 008 Bi - (2) Bi 037 (95) 075 BEF = Bi (19) UNIFLEX ø 022 (55) Bi - Bi 031 (8) BEF = Bk = Bi 071 (18) 075 (19) L 317 k l 1 = (805) Assembly options UNIFLEX 031 B i (8) B EF = B k = B i 071 (18) 317 (805) 138 (35) ø 022 (55) 049 Subject to change L k Assembly options l 1 = 362 (92) B i 051 (13) 094 B EF = B i (24) 087 (22) 075 The dimensions of the fied end and moving end brackets are identical When ordering please specify the bracket type and configuration FU/MU 362 (92) 059 (15) 148 (375) Bi 051 Bi (13) BEF = Bi 094 (24) 14 Specifications are subject to change without notice
A member of the TSUBAKI GROUP nylon open style standard widths,, and Glide Shoe Options: for use in long travel gliding applications Replacable glide shoes the economical solution for gliding applications (Types,, ) Replaceable glide shoes made of plastic To etend the life of cable carriers in gliding operations KABELSCHLEPP supplies detachable, echangeable glide shoes Replaceable glide shoes are a very economical solution When wear occurs only the glide shoes are replaced, and not the complete cable carrier Glide shoes are made of a highly wear-resistant, special material Chain height with glide shoes: : hg = hg 010 (25) = 152 (385) : hg = hg 012 (30) = 209 (53) : hg = hg 012 (30) = 248 (63) Chain width with glide shoes: : BEF = bi 075 (19) : BEF = bi 087 (22) : BEF = bi 106 (27) Minimum bend radii when using glide shoes: : min = 256 (65 mm) : min = 215 (80 mm) : min = 394 (100 mm)! By means of a positive snap connection, the glide shoes sit firmly attached on the chain link Etended Height Frame Stay Options: for use when etra cavity space is required Etended Height Frame Stay The etended height frame stay can be used to reliably route cables and hoses with a very large diameter, such as vaccuum hoses, where diameters are greater than the clearance height of the standard frame stay cavity 744 646 (189 mm) 547 (164 mm) 449 (139 mm) (114 mm) Different inside height options for different cable and hose diameters Additional chambers for further cables Routing of additional cables with small diameters such as electrical or hydraulic cables is also possible in the chambers under the main chamber Dividers can be used for additional separation of the cables Do you need further information? Please get in touch with us, we will be pleased to help you Specifications are subject to change without notice Need help? 1-800-443-4216 or wwwkabelschleppcom 15
,, and Strain Relief Options: Strain relief devices One-sided strain relief combs made of plastic (UNIFLEX ) Cables can be fied securely and simply using the optional strain relief combs The strain relief combs are installed between the UMBs, and do not need to be bolted on separately or mounted on a C-Rail Please state on the order whether strain relief combs are needed Universal mounting bracket with strain relief comb Fiing in the UMB One-sided strain relief comb nz = Number of teeth Type B i n Z 25 098 (25) 2 38 3 58 228 (58) 5 78 3 (78) 7 103 406 (103) 9 Both-sided strain relief combs made of plastic (UNIFLEX /) The cables can be fied securely and simply using the optional strain relief combs The strain relief combs are installed between the UMBs, and do not need to be bolted on separately or mounted on a C-Rail Please state on the order whether strain relief combs are needed 16 Universal mounting bracket with strain relief comb Fiing in the UMB Both-sided strain relief comb Type B i n Z 50 3 75 295 (75) 5 90 354* (90)* 6 100 394 7 125 492 9 150 591 (150) 11 Type B i n Z 50 3 75 295 (75) 5 100 394 7 125 492 9 150 591 (150) 11 175 689 (175) 13 200 787 (200) 16 225 886 (225)* 17 250 984* (250)* 19 * on request nz = Number of teeth on one side of the comb Specifications are subject to change without notice
A member of the TSUBAKI GROUP nylon open style standard widths Strain relief devices C-rails for LineFi bracket clamps, SZL strain reliefs and clamps (UNIFLEX /) The optional C-rails are fied by means of the universal mounting brackets and do not have to be screwed separately Please state in your order whether C-rails are needed 005 (12) 043 (11) 098 (25) L P Universal mounting bracket with C-rail Integratable C-rail 25 10 mm, slit width 11 mm, material steel, Item-No 3931 Our LineFi strain reliefs are optimally suited for the C-rails (LineFi bracket clamps and other strain relief devices) C-rail with LineFi strain relief Need help? 1-800-443-4216 or wwwkabelschleppcom 17