Quick release couplings

Quick release couplings G

BSIS ON QUIK RELESE OUPLINGS Hydraulic omposed of two bodies, the female or socket and the male or plug. When connected by pushing the two parts the valves open and the flow starts and contain the internal pressure and the forces that pull the joint apart. Known as well as push & pull type. o disconnect the joint it has to be pulled ejecting the plug and the valves shut off. We offer different types of couplings of steel, stainless steel and brass. General purpose. Ball lock It is the most common design. group of balls are placed in holes which are located all along the inner crown diameter of the socket. he holes are tapered so that to prevent the balls do not fall into the cavity occupied by the plug when disconnected. spring-loaded sleeve around the socket outer crown diameter pushes the balls onto the socket body internal crown diameter. While connecting the plug, the sleeve is pushed back, making a clearance thus the balls can move outwards. he plug once connected, the sleeve pushes the balls against the groove of the plug. When disconnecting, by sliding the sleeve back push the balls out making a clearance so the plug can be removed. his range of couplings is the most common, thus we present it as a general purpose quick release couplings double shut off, poppet or ball valves. We offer two famílies of general purpose, namely, meeting the dimensional requirements of ISO 7- one of them and the other ISO 5675. Flat face hread lock It is used in cases where the spill has to be limited to a minimum. his system is clean and minimizes the contamination. he system uses a poppet-style shut off valve on the socket and on the plug. he flat face can be easily cleaned and reduces the pressure drop as well the air inclusion as compared with the ball lock. Known as well as No spill couplings. his range dimensionally meets the ISO 608 Designed and used for extreme high pressure applications. It can be connected under full system pressure by rotating the female, ductile cast iron wing nut or steel hex nut onto the mating threaded plug. Ball or poppet valve options. his type provides a minimum air inclusion during connection and minimum spill during disconnection. vailable with steel hex nut or ductile wing nut to withstand hammerblows associated with connection and disconnection under pressure. Indicated in applications on dump trailers, mobile drilling rigs, mining equipment, large mobile equipment, salt spreaders and chemical transfer units. Free flow ccessories Used in applications where the maximum flow is needed. Known as well as non-valve coupling. he fact that there are not valves inside minimizes the pressure drop. Protective dust caps and dust plugs are available in rubber or metal in a variety of sizes. hey should be used whenever possible to help reduce contamination of the hydraulic system and improve service life of the socket and the plug. Seal kits are available for the sockets and the plug, also poppet assemblies for different couplings. Break away clamps and reducers are as well available. Ga

Pneumatic Pneumatic quick coupling basics Pneumatic quick couplers, are used for pneumatic applications, connecting air tools, hoses, or other implements to compressed air supplies. hey may be used also with other gases. Quick release couplings are composed of two halves, the female coupler and the male nipple. he female coupler may have a male pipe threaded end, a female pipe threaded end or a hose barb end, so the nipple, which may have a pipe threaded end a female threaded end or a hose barb end. he coupler half contains a shut-off valve that is automatically opened when a mating nipple is inserted and automatically closes when the nipple is removed. o connect pneumatic quick couplings, the coupler sleeve has to be pulled back, insert the nipple, and release the sleeve. o disconnect the other way round it has to be done, pull the sleeve back to release the nipple. It is important to pay a close attention when disconnecting the coupling under pressure as the pressure provoke a hose whip which may produce injuries and damages. Our program of pneumatic quick couplings is developped to be interchanged with the most popular designs of this industry which have come to be recognized as Standard. General purpose. Single shut off couplings Series L0, DN 5.5. Diameter 5,5 mm (7/3 ). Flow capacity.0 l/min (37, cfm). Working pressure 6 bar (3 psi). Under RO 0 Standard. Interchange with Parker, Rectus K, EJN 0 Series. Zinc plated steel/brass. Series L, DN 5.3. Diameter 5,3 mm (7/3 ). Flow capacity.0 l/min (37, cfm). Working pressure 6 bar (3 psi). Under ISO 6B Standard. Interchange with Parker, Rectus 3K, Hansen 00, EJN 0 series. Zinc plated steel/brass. Series L35, DN. Diameter 7,5 mm (5/6 ). Flow capacity. l/min (68,8 cfm). Under Japanese Standard. Interchange with Nitto HI-UPL, EJN 35, Rectus K Series. Zinc plated steel/brass. Series L3, DN 7.6. Diameter 7,6 mm (5/6 ). Flow capacity.0 l/min (7,5 cfm). Under European Standard. Interchange with EJN 3, Rectus K & 6 K Series. Zinc plated steel/brass. Series L4, DN 8.. Diameter 8, mm (5/6 ). Flow capacity.0 l/min (88,3 cfm). Under ISO 6B Standard. Interchange with EJN 4 Series. Zinc plated steel/brass. Series L5. DN. Diameter mm (7/6 ). Flow capacity 4.0 l/min (43 cfm). Under ISO 6B Standard. Interchange with EJN 5 Series. Zinc plated steel/brass. Series L-7. DN 4.6. Diameter 4,6 mm (0, ). wist lock. Interchange with Rectus 7K. Schrader 5. Brass. Series L-. DN 4.8. Diameter 4,8 mm (0, ). Interchange with Rectus K PL 60. Brass. Series L-3. DN 5.. Diameter 5, mm (0, ). ISO 6B. Interchange with Rectus 3K, Parker, Hansen 00, EJN Series. Brass. Series L-. DN. Diameter 7,5 mm ( 0, ). Interchange with European EJN 3, Rectus K & 6K Series. Brass. Series L-6. DN 7.8. Diameter 7,8 mm (0, ). Interchange with European EJN 3, Rectus & 6K Series. Brass. Series L-DG. DN Plug bore 0,. Interchange with EJN 3, Rectus & 6K Series. Brass. Series L-LM. DN Plug bore 0,. Interchange with Parker, Rectus 3K, Hansen 00 Series. Brass. Series L-LO. DN Plug bore 0,. Interchange with Parker, Rectus K, EJN 0 Series. Ga

HYDRULI GENERL PURPOSE. BLL LOK. ISO 7 L-S ISO 7-. Steel. Socket BSPP-NP. Plug BSPP-NP PPLIIONS he L-S Series brings to the industry a proven design for use on construction equipment, forestry equipment, agricultural machinery, oil tools, oil equipment steel mill machinery, and other demanding hydraulic applications. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /4 / 3/4 -/4 -/ 00 00 00 00 00 00 00 00 3 6 8 88 0 -º to +º NBR FEURES Poppet valves available to prevent uncoupled leakage. Poppet valves open automatically when coupled, within rated working pressure, to keep the flow expeditely. ritical parts are hardened for durability. Dependable ball-locking mechanism holds the mating halves together. Socket and plug are precision machined from solid bar stock. L-S series conforms to the standard of ISO 7-. ompatible with PRKER 6600 Series, FSER NV Series, EROQUIP 5600 Series and HNSEN H 00 Series. PERFORMNE: L-S Series (/4,, /, 3/4, ) (est fluid: Oil-0SUS) L-S Series ( /4, /, ) Press ure Drop in PSID Press ure Drop in PSID Flow in GPM Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G

(SOKE) L-S-0SF L-S-03SF L-S-04SF L-S-06SF L-S-08SF L-S-0SF L-S-SF L-S-6SF 4 60 75 PR NO. NP/4 NP NP/ NP3/4 NP NP-/4 NP-/ NP 6.3 0 3.5 56 66 80 4 7 3 65 LS 6 3.5.5 48 56 6.5 84 od 4 6 8 6 G/4 G/ G G-/4 G-/ G (PLUG) L-S-0PF L-S-03PF L-S-04PF L-S-06PF L-S-08PF L-S-0PF L-S-PF L-S-6PF 5.4 8 46 5 64 PR NO. NP/4 NP NP/ NP3/4 NP NP-/4 NP-/ NP 6.3 0 3.5 35.5.5 43.5 57 5.5 75 83.5 05.8 7.3.5.3 45 55 65 d 35 4 60 75 G/4 G/ G G-/4 G-/ G 4 6 8 6 OUPLING FIING L-S-0 L-S-03 L-S-04 L-S-06 L-S-08 L-S-0 L-S- L-S-6 4 60 75 PR NO. NP/4 NP NP/ NP3/4 NP NP-/4 NP-/ NP 6.3 0 3.5 7 75 88 0.5 6 0.5 L 6 3.5.5 48 56 6.5 84 od 35 4 60 75 G/4 G/ G G-/4 G-/ G G

L-S-SS ISO 7-. Stainless Steel ISI. Socket BSPP-NP. Plug BSPP-NP PPLIIONS he L-S-SS Series brings to the industry a proven design for use on costruction equipment, forestry equipment, agricultural machinery, oil tools, oil equipment steel mill machinery, and other demanding hydraulic applications. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /4 / 3/4 -/4 -/ 00 00 0 0 000 000 000 000 3 6 8 88 0 -º to +0º VION FEURES Poppet valves available to prevent uncoupled leakage. Poppet valves open automatically when coupled, within rated working pressure, to keep the flow expeditely. Dependable ball-locking mechanism holds the mating halves together. Socket and plug are precision machined from solid bar stock. L-S-SS series conforms to the standard of ISO 7-. ompatible with PRKER 6600 Series, FSER NV Series, EROQUIP 5600 Series and HNSEN H 00 Series. PERFORMNE: L-S-SS Series (/4,, /, 3/4, ) (est fluid: Oil-0SUS) L-S-SS Series ( /4, /, ) Press ure Drop in PSID Press ure Drop in PSID Flow in GPM Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G3

G4 (SOKE) L-S-SS-0SF L-S-SS-03SF L-S-SS-04SF L-S-SS-06SF L-S-SS-08SF L-S-SS-0SF L-S-SS-SF L-S-SS-6SF 4 60 75 PR NO. NP/4 NP NP/ NP3/4 NP NP-/4 NP-/ NP 6.3 0 3.5 56 66 80 4 7 3 65 LS 6 3.5.5 48 56 6.5 84 od 4 6 8 G/4 G/ G G-/4 G-/ G (PLUG) L-S-SS-0PF L-S-SS-03PF L-S-SS-04PF L-S-SS-06PF L-S-SS-08PF L-S-SS-0PF L-S-SS-PF L-S-SS-6PF 5.4 8 46 5 64 PR NO. NP/4 NP NP/ NP3/4 NP NP-/4 NP-/ NP 6.3 0 3.5 35.5.5 43.5 57 5.5 75 83.5 05.8 7.3.5.3 45 55 65 d 35 4 60 75 G/4 G/ G G-/4 G-/ G 4 6 8 OUPLING FIING L-S-SS-0 L-S-SS-03 L-S-SS-04 L-S-SS-06 L-S-SS-08 L-S-SS-0 L-S-SS- L-S-SS-6 4 60 75 PR NO. NP/4 NP NP/ NP3/4 NP NP-/4 NP-/ NP 6.3 0 3.5 7 75 88 0.5 6 0.5 L 6 3.5.5 48 56 6.5 84 od 35 4 60 75 G/4 G/ G G-/4 G-/ G

L-S ISO 7-B. Steel. Socket BSPP-NP. Plug BSPP-NP PPLIIONS L-S couplings, are used across the spectrum of hydraulic applications. hese Double Shut-Off couplings can be found anywhere that fluid transfer lines need to be connected and disconnected for operation or maintenance of equipment, and a loss of fluid is undesirable. L-S are used in construction equipment, forestry equipment, agricultural machinery, oil tools, oil equipment, steel mill machinery, and other demanding hydraulic applications. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /8 /4 / 3/4 00 00 00 00 00 00 3 6 8 -º to +º NBR FEURES Poppet valves available to prevent uncoupled leakage. Poppet valves open automatically when coupled, within rated working pressure, to keep the flow expeditely. ritical parts are hardened for durability. Dependable ball-locking mechanism holds the mating halves together. Socket and plug are precision machined from solid bar stock. L-S series conforms to the standard of ISO 7-B. ompatible with PRKER 60 Series, FSER HNV Series, EROQUIP FD45 Series and HNSEN HK Series. PERFORMNE: L-S Series (/4,, /, 3/4, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G5

G6 (SOKE) L-S-0SF L-S-0SF L-S-03SF L-S-04SF L-S-06SF L-S-08SF 7 8.5 4 PR NO. NP/8 NP/4 NP NP/ NP3/4 NP 5 6.3 0 48 58 65 74 03 LS 8.5 35 44.5 54 63.5 od.5.5 3 G/8 G/4 G/ G (PLUG) L-S-0PF L-S-0PF L-S-03PF L-S-04PF L-S-06PF L-S-08PF.8 8 45 PR NO. NP/8 NP/4 NP NP/ NP3/4 NP 5 6.3 0 46.5 56 63 0.8 4. 3.5 3.5 37.8 d 4 8.5 4 G/8 G/4 G/ G.5.5 3 OUPLING FIING L-S-0 L-S-0 L-S-03 L-S-04 L-S-06 L-S-08 7 8.5 4 PR NO. NP/8 NP/4 NP NP/ NP3/4 NP 5 6.3 0 58.5 7 80.5 3.5 6.5 L 8.5 35 44.5 54 63.5 od 7 8.5 4 G/8 G/4 G/ G

L-S-SS ISO 7-B. Stainless Steel ISI. Socket BSPP-NP. Plug BSPP-NP PPLIIONS L-S-SS are used in construction equipment, hydraulic applications.hese Double Shut-Off couplings can be found anywhere that fluid transfer lines need to be connected and disconnected for operation or maintenance of equipment, and a loss of fluid is undesirable. L-S-SS are used in construction equipment, forestry equipment, agricultural machinery, oil tools, oil equipment, steel mill machinery, and other demanding hydraulic applications. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /8 /4 / 3/4 00 00 00 0 0 000 3 6 8 -º to +80º VION FEURES Poppet valves available to prevent uncoupled leakage. Poppet valves open automatically when coupled, within rated working pressure, to keep the flow expeditely. Dependable ball-locking mechanism holds the mating halves together. Socket and plug are precision machined from solid bar stock. L-S-SS series conforms to the standard of ISO 7-B. ompatible with PRKER 60 Series, FSER HNV Series, EROQUIP FD45 Series and HNSEN HK Series. PERFORMNE: L-S-SS Series (/4,, /, 3/4, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G7

G8 (SOKE) L-S-SS-0SF L-S-SS-0SF L-S-SS-03SF L-S-SS-04SF L-S-SS-06SF L-S-SS-08SF 7 4 PR NO. NP/8 NP/4 NP NP/ NP3/4 NP 5 6.3 0 58 65 73.4 03 LS 8.5 35 4 54 65 od 0 7 3 G/8 G/4 G/ G (PLUG) L-S-SS-0PF L-S-SS-0PF L-S-SS-03PF L-S-SS-04PF L-S-SS-06PF L-S-SS-08PF.8 8 35.5 PR NO. NP/8 NP/4 NP NP/ NP3/4 NP 5 6.3 0 3 45.5 56 63 0.8 4. 3.5 3.5 37.8 d 4 45 G/8 G/4 G/ G 0 7 3 OUPLING FIING L-S-SS-0 L-S-SS-0 L-S-SS-03 L-S-SS-04 L-S-SS-06 L-S-SS-08 7 4 PR NO. NP/8 NP/4 NP NP/ NP3/4 NP 5 6.3 0 6.5 7. 80.5.5 6.5 L 35 4 54 63.5 od 7 4 G/8 G/4 G/ G

L-KZD ISO 7-B. Brass. Socket BSPP-NP. Plug BSPP-NP PPLIIONS L-KZD couplings, are used across the spectrum of hydraulic applications. hese Double Shut-Off couplings can be found anywhere that fluid transfer lines need to be connected and disconnected for operation or maintenance of equipment, and a loss of fluid is undesirable. Primarily used with hydraulic fluid. L-KZD couplings are also used with chemicals, water, steam and some gases. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /8 /4 / 3/4 /4 / 000 000 000 000 000 000 800 800 800 3 6 8 75 00 -º to +º NBR FEURES Poppet valves available to prevent uncoupled leakage. Poppet valves open automatically when coupled, within rated working pressure, to keep the flow expeditely. Dependable ball-locking mechanism holds the mating halves together. Socket and plug are precision machined from solid bar stock. L-KZD series conforms to the standard of ISO 7-B. ompatible with PRKER 60 Series, FSER HNV Series, EROQUIP FD45 Series and HNSEN HK Series. PERFORMNE: L-KZD Series (/8, /4,, / ) (est fluid: Oil-SUS) PERFORMNE: L-KZD Series (3/4,, /4, /, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Press ure Drop in PSID Flow in GPM Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G

PR NO. LS od (SOKE) 5 6.3 0 3.5 L-KZD-0SF L-KZD-0SF L-KZD-03SF L-KZD-04SF L-KZD-06SF L-KZD-08SF L-KZD-0SF L-KZD-SF L-KZD-6SF 48 58 65 88 0 5 35 45 54 64.5 6 7 0 4 4 54 60 77 Note: Only size 0 to 08 conform to the stand of ISO 7-B 8 4 7 3 G/8 ZG/4 Z ZG/ Z ZG ZG-/4 ZG-/ ZG (PLUG) PR NO. d 5 6.3 0 3.5 L-KZD-0PF L-KZD-0PF L-KZD-03PF L-KZD-04PF L-KZD-06PF L-KZD-08PF L-KZD-0PF L-KZD-PF L-KZD-6PF 44 5 6 70 75 80 0.8 4. 3.5 3.4 37.8 45 70.5 8 45 4 5 4 7 4 5 60 77 8 4 7 3 G/8 ZG/4 Z ZG/ Z ZG ZG-/4 ZG-/ ZG Note: Only size 0 to 08 conform to the stand of ISO 7-B OUPLING FIING PR NO. L od 5 6.3 0 3.5 L-KZD-0 L-KZD-0 L-KZD-03 L-KZD-04 L-KZD-06 L-KZD-08 L-KZD-0 L-KZD- L-KZD-6 58.5 80.5 8 05.5.5.5 60.5 8 35 45 54 64.5 6 7 0 4 4 54 60 77 Note: Only size 0 to 08 conform to the stand of ISO 7-B 4 7 4 5 60 77 G/8 ZG/4 Z ZG/ Z ZG ZG-/4 ZG-/ ZG G0

L-KZF ISO 7-B. Stainless steel ISI 4. Socket BSPP-NP. Plug BSPP-NP PPLIIONS L-KZF couplings, are used across the spectrum of hydraulic applications. hese Double Shut-Off couplings can be found anywhere that fluid transfer lines need to be connected and disconnected for operation or maintenance of equipment, and a loss of fluid is undesirable. Primarily used with hydraulic fluid. L-KZF couplings are also used with chemicals, water, steam and some gases. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /8 /4 / 3/4 /4 / 00 00 0 0 0 000 000 000 000 3 6 8 75 00 -º to +80º VION FEURES Poppet valves available to prevent uncoupled leakage. Poppet valves open automatically when coupled, within rated working pressure, to keep the flow expeditely. Dependable ball-locking mechanism holds the mating halves together. Socket and plug are precision machined from solid bar stock. L-KZF series conforms to the standard of ISO 7-B. ompatible with PRKER 60 Series, FSER HNV Series, EROQUIP FD45 Series and HNSEN HK Series. PERFORMNE: L-KZF Series (/8, /4,, / ) (est fluid: Oil-SUS) PERFORMNE: L-KZF Series (3/4,, /4, /, ) (3/4 & : est fluid: Oil-SUS) ( /4 & /, : est fluid: Oil-0SUS) Press ure Drop in PSID Press ure Drop in PSID Flow in GPM Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G

PR NO. LS od (SOKE) 5 6.3 0 3.5 L-KZF-0SF L-KZF-0SF L-KZF-03SF L-KZF-04SF L-KZF-06SF L-KZF-08SF L-KZF-0SF L-KZF-SF L-KZF-6SF 48 58 65 88 0 5 35 45 54 64.5 6 7 0 4 4 54 60 77 Note: Only size 0 to 08 conform to the stand of ISO 7-B 8 4 7 3 G/8 ZG/4 Z ZG/ Z ZG ZG-/4 ZG-/ ZG (PLUG) PR NO. d 5 6.3 0 3.5 L-KZF-0PF L-KZF-0PF L-KZF-03PF L-KZF-04PF L-KZF-06PF L-KZF-08PF L-KZF-0PF L-KZF-PF L-KZF-6PF 44 5 6 70 75 80 0.8 4. 3.5 3.4 37.8 45 70.5 8 45 4 5 4 7 4 5 60 77 8 4 7 3 G/8 ZG/4 Z ZG/ Z ZG ZG-/4 ZG-/ ZG Note: Only size 0 to 08 conform to the stand of ISO 7-B OUPLING FIING PR NO. L od 5 6.3 0 3.5 L-KZF-0 L-KZF-0 L-KZF-03 L-KZF-04 L-KZF-06 L-KZF-08 L-KZF-0 L-KZF- L-KZF-6 58.5 80.5 8 05.5.5.5 60.5 8 35 45 54 64.5 6 7 0 4 4 54 60 77 Note: Only size 0 to 08 conform to the stand of ISO 7-B 4 7 4 5 60 77 G/8 ZG/4 Z ZG/ Z ZG ZG-/4 ZG-/ ZG G

HYDRULI GENERL PURPOSE. BLL LOK. ISO 5675 L-S5 L-S5 PPLIIONS he L-S5 and L-S5 Series brings to the industry a proven design for use on construction equipment, forestry equipment agricultural machinery, and oil tools. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL / 00 -º to +º NBR FEURES Double acting sleeve for one handed push-to-connect operation when coupler is clamp or bulkhead mounted. Poppet valves available to prevent uncoupled leakage. Poppet valves open automatically when coupled, within rated working pressure, to keep the flow expeditely. ritical parts are hardened for durability. Dependable ball-locking mechanism holds the mating halves together. Socket and plug are precision machined from solid bar stock. L-S5 series conforms to the standard of ISO 5675. ompatible with PRKER Series, FSER PV-NV Series. PERFORMNE: L-S5 Series (/ ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G

G4 (SOKE) (PLUG) L-S5-04PF L-S5-04PF/ L-S5-04PF3/4 L-S5-04PFM4 L-S5-04PFM 6 L-S5-04PFMI8 L-S5-04PFM PR NO. NP NP/ NP3/4 - - - - 6.5 44 64.5 6.5 6.5 6.5 44.5.5.5.5.5.5.5 d BSP /BSP 3/4BSP M4*.5 M6*.5 M8*.5 M*.5 OUPLING FIING L-S5-04F L-S5-04F/ L-S5-04F3/4 L-S5-04FM4 L-S5-04FM6 L-S5-04FM8 L-S5-04FM PR NO. 05.5 05.5 05.5 05.5 05.5 05.5 05.5 L od L-S5-04SF L-S5-04SF/ L-S5-04SF3/4 L-S5-04SFM4 L-S5-04SFM6 L-S5-04SFMI8 L-S5-04SFM PR NO. 66 66 6 66 66 66 66 LS od NP NP/ NP3/4 - - - - BSP /BSP 3/4BSP M4*.5 M6*.5 M8*.5 M*.5 NP NP/ NP3/4 - - - - BSP /BSP 3/4BSP M4*.5 M6*.5 M8*.5 M*.5

G5 L-S5 ISO 5675. Steel. Socket BSPP-Metric-NP. Plug BSPP-Metric-NP L-S5-04SM8L L-S5-04SM0L L-S5-04SML L-S5-04SM5L L-S5-04SM8L L-S5-04SM0S L-S5-04SMS L-55-04SM4S L-S5-04SM6S L-S5-04SMS PR NO. 73.5 73.5 73.5 75.5 75.5 73.5 73.5 75.5 75.5 7 LS od 4 4 4 4 6 M4*.5 M6*.5 M8*.5 M*.5 M6*.5 M8*.5 M*.5 M*.5 M*.5 M* L-S5-04PM8L L-S5-04PM0L L-S5-04PML L-S5-04PM5L L-S5-04PM8L L-S5-04PM0S L-S5-04PMS L-55-04PM4S L-S5-04PM6S L-S5-04PMS PR NO. M4*.5 M6*.5 M8*.5 M*.5 M6*.5 M8*.5 M*.5 M*.5 M*.5 M* 58.5 58.5 58.5 60.5 60.5 58.5 58.5 60.5 60.5 6.5.5.5.5.5.5.5.5.5.5.5 d 4 4 4 4 6 L-S5-04-8L L-S5-04-0L L-S5-04-L L-S5-04-5L L-S5-04-8L L-S5-04-0S L-S5-04-S L-S5-04-4S L-S5-04-6S L-S5-04-S PR NO. M4*.5 M6*.5 M8*.5 M*.5 M6*.5 M8*.5 M*.5 M*.5 M*.5 M* 0.5 0.5 0.5.5.5 0.5 0.5.5.5.5 L od (SOKE) (PLUG) OUPLING FIING

G6 L-S5 ISO 5675. Steel. Bulkhead Socket BSPP-Metric-NP. Plug BSPP-Metric-NP L-S5-04SM8L L-S5-04SM0L L-S5-04SML L-S5-04SM5L L-S5-04SM8L L-S5-04SM0S L-S5-04SMS L-S5-04SM4S L-S5-04SM6S L-S5-04SMS PR NO. 87 87 87 8 8 87 87 8 8 6 LS od M4*.5 M6*.5 M8*.5 M*.5 M6*.5 M8*.5 M*.5 M*.5 M*.5 M* L-S5-04PM8L L-S5-04PM0L L-S5-04PML L-S5-04PM5L L-S5-04PM8L L-S5-04PM0S L-S5-04PMS L-S5-04PM4S L-S5-04PM6S L-S5-04PMS PR NO. M4*.5 M6*.5 M8*.5 M*.5 M6*.5 M8*.5 M*.5 M*.5 M*.5 M* 7 7 7 74 74 7 7 74 74 8.5.5.5.5.5.5.5.5.5.5 d 3 L-S5-04-8L L-S5-04-0L L-S5-04-L L-S5-04-5L L-S5-04-8L L-S5-04-0S L-S5-04-S L-S5-04-4S L-S5-04-6S L-S5-04-S PR NO. M4*.5 M6*.5 M8*.5 M*.5 M6*.5 M8*.5 M*.5 M*.5 M*.5 M* 43.5 43.5 43.5 45.5 L od (SOKE) (PLUG) OUPLING FIING 3

L-S4 ISO 5675. Steel. Socket BSPP-NP. Plug BSPP-NP PPLIIONS he L-S4 Series brings to the industry a proven design for use on construction equipment, forestry equipment, agricultural machinery, oil tools, steel mill machinery, and other demanding hydraulic applications. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /4 / 3/4 00 00 00 00 00 3 6 8 -º to +º NBR FEURES Poppet valves available to prevent uncoupled leakage. Ball valves available for rugged dependability in heavy-duty hydraulic applications within rated working pressure. Hard, chrome alloy balls are used for valving. It be loaded on the valve seat by the springs. he valve provides a metal-to-metal seal between the ball and coined seat. ritical parts are hardened for durability. Dependable ball-locking mechanism holds the mating halves together. Socket and plug are precision machined from solid bar stock. L-S4 series conforms to the standard of ISO 5675. ompatible with PRKER 00 Series and FSER NV/NS Series. PERFORMNE: L-S4 ( /4,, /, 3/4, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G7

PR NO. LS od (SOKE) * * 6.3 0 L-S4-0SF L-S4-03SF L-S4-04SF L-S4-06SF L-S4-06SF (E) L-S4-08SF 53.5 63 66.3 8.5 83.5 6.5.6.6 48. 4 56 35 4 6 8 G/4 G/ G NP/4 NP NP/ NP3/4 NP3/4 NP * Note: L-S4-06SF, Faster interchange L-S4-06SF (E), Parker interchange (PLUG) PR NO. d * * 6.3 0 L-S4-0PF L-S4-03PF L-S4-04PF L-S4-06PF L-S4-06PF (E) L-S4-08PF 43.5 53.5 5 63 4..5 8 6. 3.3 8.5 3 8.5 33.3 4 6 8 G/4 G/ G NP/4 NP NP/ NP3/4 NP3/4 NP * Note: L-S4-06PF, Faster interchange L-S4-06PF (E), Parker interchange OUPLING FIING PR NO. L od * * 6.3 0 L-S4-0 L-S4-03 L-S4-04 L-S4-06 L-S4-06 (E) L-S4-08 7. 8.6 87.8 07.8 0 6.8.6.6 48. 4 56. 35 4 35 4 G/4 G/ G NP/4 NP NP/ NP3/4 NP3/4 NP * Note: L-S4-06, Faster interchange L-S4-06 (E), Parker interchange G8

L-PK ISO 5675. Steel. Socket BSPP-NP. Plug BSPP-NP PPLIIONS he L-PK Series brings to the industry a proven design for use on construction equipment, forestry equipment, agricultural machinery, oil tools, steel mill machinery, and other demanding hydraulic applications. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /4 / 3/4 00 00 00 00 00 3 6 8 -º to +º NBR FEURES Poppet valves available to prevent uncoupled leakage. Poppet valves open automatically when coupled, within rated working pressure, to keep the flow expeditely. ritical parts are hardened for durability. Dependable ball-locking mechanism holds the mating halves together. Socket and plug are precision machined from solid bar stock. L-PK series conforms to the standard of ISO 5675. ompatible with PRKER 00 Series and FSER NV/NS Series. PERFORMNE: L-PK ( /4,, /, 3/4, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G

PR NO. LS od (SOKE) * * 6.3 0 L-PK-0SF L-PK-03SF L-PK-04SF L-PK-06SF L-PK-06SF (E) L-PK-08SF 55.5 60.5 68 83 8.5.6 4 48. 56.. 35 4 6 8 G/4 G/ G NP/4 NP NP/ NP3/4 NP3/4 NP * Note: L-PK-06SF, Parker interchange L-PK-06SF (E), Faster interchange (PLUG) PR NO. d * * 6.3 0 L-PK-0PF L-PK-03PF L-PK-04PF L-PK4-06PF L-PK-06PF (E) L-PK-08PF 46 5 53.5 64 4..5 6. 8 3.3 8.5 8.5 3 33.3 4 6 8 G/4 G/ G NP/4 NP NP/ NP3/4 NP3/4 NP * Note: L-PK-06PF, Parker interchange L-PK-06PF (E), Faster interchange OUPLING FIING PR NO. L od * * 6.3 0 L-PK-0 L-PK-03 L-PK-04 L-PK-06 L-PK-06 (E) L-PK-08 74. 80..3 0. 07.8 8.8.6.5 4 48. 56.. 35 4 33.3 4 G/4 G/ G NP/4 NP NP/ NP3/4 NP3/4 NP * Note: L-S4-06, Parker interchange L-S4-06 (E), Faster interchange G

FL FE. ISO 608 L-FF ISO 608. Flat face. Steel. Socket BSPP-NP. Plug BSPP-NP PPLIIONS L-FF Series couplings are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly in overhead bucket hoists that are used for maintenance of high-voltage power transmission lines. hese couplings are also used for quick change of hydraulic tools in construction, railway maintenance and mining industries. he ease of cleaning makes them ideal for use in these types of hostile environments. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SPILLGE (ML) (max. per disconnect) SNDRD SEL MERIL /4 (0) (03) / (04) 5/8 (06) 3/4 (08) (0) -/ () (6) 00 43 43 00 00 00 3 6 8 80 00 -º to +º 0.006 0.0 0.0 0.06 0.03 0.035 0.05 0. NBR FEURES New valve design, it can resist damage from high flow and the pressure of impulse thus providing advanced performance. Sleeve locking mechanism is engaged by rotating sleeve after connection. lt prevents accidental disconnection when, the coupling is dragged along the ground. Sleeve mechanism is designed to help prevent dirt from entering the internal mechanism and thus causing faulty operation when connecting or disconnecting. he sleeve covers the retaining ring and also incorporates a dust seal in the spring area. Steel construction, zinc plated with yellow chrome finish. Hardened nipples and sleeves and solid barstock construction for maximum resistance to damage from hydraulic and mechanical shock. his nti-blowout Nitrile/PFE bonded seal is designed to prevent blow-out or damage during severe service conditions. Durable ball-locking mechanism assures reliable connections, every time. large number of locking balls distributes the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life. UION: hese products are not to be used as swivels. Rotation under pressure will result in excessive and premature wear. L-FF Series couplings employ flush valving when connecting or disconnecting. his means that the valves are mated together so that only small amounts of fluid can be lost during disconnection or air inclusion during reconnection. New chrome plating treatment provides advanced anti-rust performance. L-FF series conforms to standard of ISO 608. ompatible with PRKER FE Series, SUHI 8008 Series, EROQUIP FD8 Series and HNSEN Q00 Series. PERFORMNE: L-FF Series ( /4,, /, 5/8, 3/4, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G

G (SOKE) (PLUG) OUPLING FIING L-FF-0SF L-FF-03SF L-FF-03SF L-FF-04SF L-FF-04SF L-FF-06SF L-FF-08SF L-FF-08SF L-FF-0SF L-FF-SF L-FF-6SF S S S S3 S S S4 S4 S55 S65 S85 PR NO. 6.3 0 0 6 - - 58. 68. 7. 75 7 80.8.8.5 67 LS 8 3 3 4 48 48 56 7.5 8.5 od 4 4 8 8 3.5 3 G/4 G/ G/ G G-/4 G-/ G NP/4 NP NP/ NP/ NP3/4 NP3/4 NP3/4 NP NP-/4 NP-/ NP L-FF-0 L-FF-03 L-FF-03 L-FF-04 L-FF-04 L-FF-06 L-FF-08 L-FF-08 L-FF-0 L-FF- L-FF-6 S S S S3 S S S4 S4 S55 S65 S85 PR NO. 6.3 0 0 6 - - 6. 08.4 6.4.3 7.3 8 7. 7. 78 33.4.7 L 8 3 3 4 48 48 56 7.5 8.5 D S S S S3 S S S4 S4 S55 S65 S75 G/4 G/ G/ G G-/4 G-/ G NP/4 NP NP/ NP/ NP3/4 NP3/4 NP3/4 NP NP-/4 NP-/ NP L-FF-0PF L-FF-03PF L-FF-03PF L-FF-04PF L-FF-04PF L-FF-06PF L-FF-08PF L-FF-08PF L-FF-0PF L-FF-PF L-FF-6PF 5..5.5.6.6.6.5 PR NO. 6.3 0 0 6 - - 4. 55.8 5.8 7 76 75.5 3.8 3.8 0 3. 6..7.7.5.5 57 73 S S S S3 S S S4 S4 S55 S65 S85 G/4 G/ G/ G G-/4 G-/ G NP/4 NP NP/ NP/ NP3/4 NP3/4 NP3/4 NP NP-/4 NP-/ NP d 4 4 8 8 3.5 3

L-VEP Flat Face. hreaded union lock. Steel. Socket BSPP- NP. Plug BSPP-NP PPLIIONS Portable construction equipments. Hydraulic tools. Vehicles. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL / (04) 5/8 (06) 3/4 (08) (0) -/ () 7000 7000 7000 6000 00 8 88 5 -º to +º NBR FEURES New valve design, it can resistance damage from high flow and the pressure of impulse that providing advanced performance. Special nipple design for connecting under pressure, allows connection and disconnection with high residual pressures. he L-VEP series employs a threaded sleeve locking mechanism, mates with matching male threads on the coupler. he two halves must be manually threaded together for connection. New chrome plating treatment provides advanced anti-rust performance L-VEP series couplings employ flush valving when connecting or disconnecting. his means that the valves are mated togethet so that only small amounts of fluid can be lost during disconnecting or air inclusion during reconnection. his nti-blowout BF bonded seal is designed to prevent blow-out or damage during severe service conditions. Machined form solid steel barstock for durability. ompatible with SUHI VEP Series. PERFORMNE: L-VEP Series ( /, 5/8, 3/4,, -/4 ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G3

G (SOKE) (PLUG) OUPLING FIING L-VEP-04SF L-VEP-06SF L-VEP-08SF L-VEP-0SF L-VEP-SF S S4 S46 S55 S65 PR NO. 3 6 3.5 03.5 4 3.5 45. 8 LS 4 53.7 58.8 68.7 S46 S S55 S65 S85 G/ G G-/4 G-/ NP/ NP3/4 NP NP-/4 NP-/ od 6.5 L-VEP-04 L-VEP-06 L-VEP-08 L-VEP-0 L-VEP- S S4 S46 S55 S65 PR NO. 6 3.5 54.5 64.3 8.4 7. 63.5 L 4 53.7 58.8 68.7 S46 S S55 S65 S85 3 G/ G G-/4 G-/ NP/ NP3/4 NP NP-/4 NP-/ od S S S46 S55 S65 L-VEP-04PF L-VEP-06PF L-VEP-08PF L-VEP-0PF L-VEP-PF.54.04.5.05 57 PR NO. E 6 3.5 5 8.8. 3.5 LS 8.8.5.8 3.5 d M*3 M45*3 M*3 M58*3 r80*4 G/ G G-/4 G-/ NP/ NP3/4 NP NP-/4 NP-/ 6.5 S S S46 S55 S65

L-PD PPLIIONS L-PD series brings to the industry a proven design for use on hydraulic system and hydraulic test ports. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /4 6000 0.53 -º to +º NBR FEURES New valve design, it cans resistance damage from high flow and the pressure Flush-face poppet valves minimize air inclusion and spillage. Poppet valves available to prevent uncoupled leakage. Poppet valves open automatically when coupled, within rated working pressure, to keep the flow expeditely. ritical parts are hardened for durability. Dependable ball-locking mechanism holds the mating halves together. Socket and plug are precision machined from solid bar stock. ompatible with FSER DF Series, PRKER PDSeries, EROQUIP FD 0 Series. PERFORMNE: L-PD Series (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G

HRED LOK L-KZE-B hreaded union lock. Steel. Socket NP-Plug NP PPLIIONS L-KZE-B Series couplings with their threaded union locking system and precision balltype check valves, are desinged for extreme high pressure applications such as portable hydraulic jacks. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /4 0000 3 6 -º to +º NBR FEURES Machined from solid steel barstock for durability. he L-KZE-B Series employs a threaded sleeve locking mechanism, mates with matching male threads on the nipple. he two halves must be manually threaded together for connection. Hard, chrome alloy balls are used for valving. hey are spring loaded for positive seating of the valve. he valve provides a metal-to-metal seal between the ball and coined seat. he interface seal is polyurethane which resists high pressure extrusion. ompatible with PRKER 00 Series and FSER PVVM Series. PERFORMNE: L-KZE-B Series (/4, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G6

PR NO. LS od (SOKE) L-KZE-B-0SM L-KZE-B-03SM 60.8 73.5 8.5 35.5 4.4 NP/4 NP (PLUG) PR NO. L-KZE-B-0PF L-KZE-B-03PF 3.5 35. 6 3.5 NP/4 NP OUPLING FIING PR NO. L od L-KZE-B-0 L-KZE-B-03 74.5 83.5 8.5 35 3 NP/4 NP Note: Mark "Ball" after the Part No., if the valve require ball valve. G

L-KZE-B hreaded union lock. Steel. Socket NP-BSPP. Plug BSPP-NP PPLIIONS Mobile equipment, agriculture machine and universal industrial equipment. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /4 / 3/4 0000 0000 0000 80 6000 3 6 8 -º to +º NBR FEURES New valve design, it can resistance damage from high flow and the pressure of impulse that providing advanced performance. Machined from solid steel barstock for durability. he L-KZE-B Series employs a threaded sleeve locking mechanism, mates with matching male threads on the nipple. he two halves must be manually threaded together for connection. New chrome plating treatment provides advanced anti-rust performance. ompatible with GROMELLE 6000 Series and HOLMBURY GW Series. PERFORMNE: L-KZE-B Series (/4,, /, 3/4, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G8

G (SOKE) (PLUG) OUPLING FIING L-KZE-B-0 L-KZE-B-03 L-KZE-B-04 L-KZE-B-06 L-KZE-B-08 S S S S35 S4 PR NO. 7.3 8.5 8.3.4. L S3 S S4 S S65 od S S S S35 S4 L-KZE-B-0SF L-KZE-B-03SF L-KZE-B-04SF L-KZE-B-06SF L-KZE-B-08SF S S S S35 S4 PR NO. 58. 66.5 76.5 8.5 05.5 LS S3 S S4 S S65 od 6 8.5.5 G/4 G/ G NP/4 NP NP/ NP3/4 NP L-KZE-B-0PF L-KZE-B-03PF L-KZE-B-04PF L-KZE-B-06PF L-KZE-B-08PF S S S S35 S4 PR NO..5 4 56 66 6 7 6 8.5.5 G/4 G/ G NP/4 NP NP/ NP3/4 NP G/4 G/ G NP/4 NP NP/ NP3/4 NP

L-KZE-BD hreaded union lock. Steel. Socket NP-BSPP. Plug BSPP-NP PPLIIONS Mobile equipment, agriculture machine and universal industrial equipment. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /4 / 3/4 /4 / 0000 0000 0000 0000 70 60 00 00 4.5 8 35 75 0 -º to +º NBR FEURES New valve design, it can resistance damage from high flow and the pressure of impulse that providing advanced performance. Machined from solid steel barstock for durability. he L-KZE-BB Series employs a threaded sleeve locking mechanism, mates with matching male threads on the nipple. he two halves must be manually threaded together for connection. New chrome plating treatment provides advanced anti-rust performance. ompatible with FSER VVS Series. PERFORMNE: L-KZE-BD Series (/4,, /, 3/4, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G

G3 (SOKE) (PLUG) OUPLING FIING L-KZE-BD-0PF L-KZE-BD-03PF L-KZE-BD-04PF L-KZE-BD-06PF L-KZE-BD-08PF L-KZE-BD-0PF L-KZE-BD-PF L-KZE-BD-6PF 3 46 65 80 0 PR NO. 43 48 53 63 7 86 5 8 6 8 3 6 G/4 G/ G G-/4 G-/ G NP/4 NP NP/ NP3/4 NP NP-/4 NP-/ NP L-KZE-BD-0SF L-KZE-BD-03SF L-KZE-BD-04SF L-KZE-BD-06SF L-KZE-BD-08SF L-KZE-BD-0SF L-KZE-BD-SF L-KZE-BD-6SF 3 4 65 75 00 PR NO. 3 68 75.6 86.4 05.5 3 5.5 7 6.5 LS 3.7 45 53.8 58.8 78.5 8 od 6 4.5 3 3 6 G/4 G/ G G-/4 G-/ G NP/4 NP NP/ NP3/4 NP NP-/4 NP-/ NP 4 55 75 0 L-KZE-BD-0 L-KZE-BD-03 L-KZE-BD-04 L-KZE-BD-06 L-KZE-BD-08 L-KZE-BD-0 L-KZE-BD- L-KZE-BD-6 3 4 65 75 00 PR NO. 84. 8.5 0.. 8.5 6 88.4 L 3.7 45 53.8 58.8 78.5 8 od 4 55 75 0 3 G/4 G/ G G-/4 G-/ G NP/4 NP NP/ NP3/4 NP NP-/4 NP-/ NP 3 46 65 80 0

L-VV hreaded union lock. Steel. Socket NP-BSPP. Plug BSPP-NP. O-ring PPLIIONS he L-VV Series widely used in equipments (excavators) vehicles, hydraulic equipments driling machines. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /4 / 3/4 00 00 00 3 6 8 -º to +º NBR FEURES New valve design, it can resistance damage from high flow and the pressure of impulse that providing advanced performance. Machined from solid steel barstock for durability. he L-VV Series employs a threaded sleeve locking mechanism, mates with matching male threads on the coupler. he two halves must be manually threaded together for connection. New chrome plating treatment provides advanced anti-rust performance. threaded valve retainer provides a valve stop that assures positive valve alignment. ompatible with FSER VV Series SUHI VD Series. PERFORMNE: L-VV Series ( /4,, /, 3/4, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G3

G33 (SOKE) (PLUG) OUPLING FIING L-VV-0SF L-VV-03SF L-VV-04SF L-VV-06SF L-VV-08SF S S S S S4 PR NO. 3 58.6 60.8 67.7 73.5 4.5 LS 4 48 56.5 od 8 8.5 G/4 G/ G NP/4 NP NP/ NP3/4 NP S S S S4 S5 L-VV-0 L-VV-03 L-VV-04 L-VV-06 L-VV-08 S S S S S4 PR NO..6 8. 03 55 L 4 48 56.5 od S S S S4 S 3 G/4 G/ G NP/4 NP NP/ NP3/4 NP S S S S S4 L-VV-0PF L-VV-03PF L-VV-04PF L-VV-06PF L-VV-08PF M* M8* M* M4* M48*3 PR NO. 60 55.3 6.5 83.5 4.5 S S S S S4 G/4 G/ G NP/4 NP NP/ NP3/4 NP D 8 8.5

L-BB hreaded union wingnut lock. Socket BSPP. Plug BSPP. O-ring PPLIIONS he L-BB Series is a thread -to-connect. It can be widely used in various application with non-spillage under pressure. L-BB Series can be suitable used in connecting equipment of the hydraulic lines like power tongs, swivels and mobile drillings, it also widely used dump tracks, and dump trailer to connect with to wet line hydraulic system. nd it also suitable used in submersible pumps, engine test stands, and the equipment require connect under high pressure or high liquid transfer. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL 3/4 -/4 00 00 00 8 88 -º to +º NBR PR NO. od L LS L-BB-06 L-BB-08 L-BB-0 NP3/4 NP NP -/4 06 0 33.5 3.5 48 45 3.5 57 64 66 83.5 8 7. 0 4 FEURES L-BB Heavy-dust wing nut is ruggedly built specifically to withstand the hammer blows commonly used to tighten and loosen this coupler. ssembled valve seal can permits full pressure connect and disconnect, without seal washout. he flush face valve keeps air inclusion and spillage to a minimum. orrosion resistant brass coupling, makes it compatible with a widely range and provides windely functionality. ompatible with PRKER 600 series, FSER FB series, EROQUIP 0 series, HNSEN 6 series. PERFORMNE: L-BB Series ( 3/4,, -/4 ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G

L-B hreaded union wingnut lock. Socket BSPP. Plug BSPP-NP. O-ring PPLIIONS he L-B Series can widely used on dump tracks, buses, agricultural machinery and mobile contruction equipment. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL 3/4 00 00 -º to +º NBR PR NO. od L LS L-B-06 L-B-08 G 5.4 5.4 46 55 33.5 45 78 83 78 83 FEURES L-B is a thread-to-connect coupling, socket with wing nut can operate by manual with left over pressure. ompatible with FSER VE series, HOLMBURY VR series. PERFORMNE: L-B Series ( 3/4, ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G35

L-4 hreaded union brass nut lock. Socket BSPP. Plug BSPP. O-ring PPLIIONS Portable hydraulic jacks. SPEIFIIONS (in) RED PRESSURE (PSI) RED FLOW (GPM) EMPERURE RNGE (std seals) SNDRD SEL MERIL /4 0000 3 -º to +º NBR 3 PR NO. L LS L-4 NP /4 06.8.7 6. FEURES Stainless steel body Brass locking sleeve hread locking system help prevent coupling from accidentally disconnecting Small diameter mating seal helps keep separating forces to a minimum, allowing for easier connect and disconnect at pressure up to 00 PSI. Interchangeability: Parker 4 Series. G

FREE FLOW L-LS PPLIIONS he L-LS Series are non-valved couplings for applications where maximum flow is required. heir smooth, open bore offers the lowest pressure drop of any quick coupling design and is ideal for applications such as high-pressure water and steam washers, carpet cleaners and mold coolant lines and many other non-valved applications. SPEIFIIONS (in) BRSS plr /Npl BRSS plr /Steel Npl RED FLOW (GPM) EMPERURE RNGE (std seals) /8 /4 / 000 000 000 000 00 0 0 0 3 6 -º to +º FEURES he smooth, open bore with no valving in either half offers minimal pressure drop and allows easy cleaning in applications where the same lines are used for more than one media. L-LS couplers and nipples are machined from solid bar stock providing the quality coupling that is durable. L-LS nipples are available in brass and zinc-plated steel. he ball locking grooves of the steel L-LS nipples are case hardened for resistance to brinelling where high cycle rates and pressure surges are encountered. he L-LS is an" Interchange "coupling because the dimensionally and functionally can interchange with similar couplings made by other manufacturers. ompatible with PRKER S Series, HNSEN S Series, FOSER FS Series. PERFORMNE: L-LS Series ( /8, /4,, / ) (est fluid: Oil-0SUS) Press ure Drop in PSID Flow in GPM GPM= 3.78 L/Min PSID= 0.006 MPa G37

G (SOKE) (PLUG) L-LS-0SF L-LS-0SF L-LS-03SF L-LS-04SF L-LS-06SF L-LS-08SF 4 44.45 PR NO. 37 4.5 5 53.4 66 LS 8 33..5 od 0 5 NP/8 NP/4 NP NP/ NP3/4 NP L-LS-0SM L-LS-0SM L-LS-03SM L-LS-04SM L-LS-06SM L-LS-08SM 4 44.45 PR NO. 3.5 43 53 56.7 6. LS 8 33..5 od 0 5 NP/8 NP/4 NP NP/ NP3/4 NP L-LS-0PF L-LS-0PF L-LS-03PF L-LS-04PF L-LS-06PF L-LS-08PF 4 7 PR NO. 37 4.5 5 5 60 7.5.5 6 8.5.5 0 5 NP/8 NP/4 NP NP/ NP3/4 NP L-LS-0PM L-LS-0PM L-LS-03PM L-LS-04PM L-LS-06PM L-LS-08PM 4 7 35 PR NO. 3.5 43 53 57. 6.4 7.5.5 6 8.5.5 0 5 NP/8 NP/4 NP NP/ NP3/4 NP

MULI OUPLING FL SEL MULI OUPLING L-DL have a compact structure, manual multicouplings that offer a wide range of solutions for any applications requiring connection and disconnection of several hidraulic. Up to 6 line / can be simultaneously connected and disconnected by a safe, simple and quickmovement requiring loweffort. he lines can all have the same size or each line can be different from the others according to the application. MIN PPLIIONS: gricultural equipment. Mobile construction equipment. Vehicles. Industrial equipment. EHNIL FEURES ND OPIONS: Mechanical connection: Internal cams and locking pins. onnection system: Rotating the lever. Disconnection system: Rotating the lever. onstruction material and surface treatment: Body plates in aluminum alloy oxidation. ams and pins in high resistance carbon steel with special heat treatment. Others components in carbon steel with zinc plating or zinc nickel treatment. Guidance / locking pins eliminate risk of incorrect connections of the lines Metal (luminum) protection cover for fixed multicoupling Flat Seal Safety lock system avoids accidental disconnection Ergonomic lever for easy connection / disconnection even with high residual pressure in the circuit G3

ESORIES L-S P Plastic dust cap and plug for L-S SPEIFIION PLUG DUS P PR NO. SOKE DUS PLUG PR NO. /4 / 3/4 -/4 -/ L-S PD-/4M L-S PD-M L-S PD-/M L-S PD-3/4M L-S PD-M L-S PD--/4M L-S PD--/M L-S PD-M L-S PD-/4F L-S PD-F L-S PD-/F L-S PD-3/4F L-S PD-F L-S PD--/4F L-S PD--/F L-S PD-F L-S P Plastic dust cap and plug for L-S SPEIFIION PLUG DUS P PR NO. SOKE DUS PLUG PR NO. /4 / 3/4 L-S PD-/4M L-S PD-M L-S PD-/M L-S PD-3/4M L-S PD-M L-S PD-/4F L-S PD-F L-S PD-/F L-S PD-3/4F L-S PD-F L-S4 P Plastic dust cap and plug for L-S4 SPEIFIION PLUG DUS P PR NO. SOKE DUS PLUG PR NO. /4 / 3/4 L-S4 PD-/4M L-S4 PD-M L-S4 PD-/M L-S4 PD-3/4M L-S4 PD-M L-S4 PD-/4F L-S4 PD-F L-S4 PD-/F L-S4 PD-3/4F L-S4 PD-F G

L-S5 P Plastic dust cap and plug for L-S5 SPEIFIION PLUG DUS P PR NO. SOKE DUS PLUG PR NO. / L-S5 PD-/M L-S5 PD-/F L-PK P Plastic dust cap and plug for L-PK SPEIFIION PLUG DUS P PR NO. SOKE DUS PLUG PR NO. /4 / 3/4 L-PK PD-/4M L-PK PD-M L-PK PD-/M L-PK PD-3/4M L-PK PD-M L-PK PD-/4F L-PK PD-F L-PK PD-/F L-PK PD-3/4F L-PK PD-F L-FF P Plastic dust cap and plug for L-FF SPEIFIION PLUG DUS P PR NO. SOKE DUS PLUG PR NO. /4 (0) (03) / (04) 5/8 (06) 3/4 (08) (0) L-FF PD-/4M L-FF PD-M L-FF PD-/M L-FF PD-5/8M L-FF PD-3/4M L-FF PD-M L-FF PD-/4F L-FF PD-F L-FF PD-/F L-FF PD-5/8F L-FF PD-3/4F L-FF PD-F G4

L-B P Plastic dust cap and plug for L-B SPEIFIION PLUG DUS P PR NO. SOKE DUS PLUG PR NO. /4 L-B PD-/4M L-B PD-M L-B PD-/4F L-B PD-F L-B P Metal dust cap and plug for L-B SPEIFIION PLUG DUS P PR NO. SOKE DUS PLUG PR NO. /4 L-B MD-/4M L-B MD-M L-B MD-/4F L-B MD-F L-B P Metal dust cap and plug for L-B SPEIFIION PLUG DUS P PR NO. SOKE DUS PLUG PR NO. /4 / 3/4 L-B MD-/4M L-B MD-M L-B MD-/M L-B MD-3/4M L-B MD-M L-B MD-/4F L-B MD-F L-B MD-/F L-B MD-3/4F L-B MD-F G4

L-VEP Metal dust cap and plug for L-VEP SPEIFIION PLUG DUS P PR NO. SOKE DUS PLUG PR NO. / (04) 5/8 (06) 3/4 (08) (0) -/ () L-VEP MD-/M L-VEP MD-5/8M L-VEP MD-3/4M L-VEP MD-M L-VEP MD--/M L-VEP MD-/F L-VEP MD-5/8F L-VEP MD-3/4F L-VEP MD-F L-VEP MD--/F L-DUS P General use plastic cap SPEIFIION /4BSP /4NP BSP NP /BSP /NP 3/4BSP 3/4NP BSP NP -/4BSP -/4NP -/BSP -/NP BSP NP PR NO. /4BSP(PD) /4NP(PD) BSP(PD) NP(PD) /BSP(PD) /NP(PD) 3/4BSP(PD) 3/4NP(PD) BSP(PD) NP(PD) -/4BSP(PD) -/4NP(PD) -/BSP(PD) -/NP(PD) BSP(PD) NP(PD) G43

PNEUMI GENERL PURPOSE L-0 RO 0. Steel. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Valid diameter 5.5mm, R00 standard DVNGES: Large flow valve, single hand operation. PPLIION: Pneumatic tools, production and assemble line, machinery equipment. INERHNGEBILIY: Parker Series, Rectus K Series, EJN 0 Series WORKING PRESSURE:.6Mpa WORKING EMPERURE: -º to +º Brass material is optional PR NO. LS od L-0-0SM L-0-03SM 6.8 60.8 3.3 3.3 ZG/4 Z 7.8.3 PR NO. L-0-0PM L-0-03PM 4 4.5 4 7 ZG/4 Z 5.4 5.4 PR NO. LS od L-0-0SF L-0-03SF 5.8 5.8 3.3 3.3 G/4 4 4 PR NO. L-0-0PF L-0-03PF 7 G/4 5.4 5.4 PR NO. LS od o L-0-0SH L-0-0SH L-0-03SH 6.8 74.8 74.8 3.3 3.3 3.3 7 4 5.5 PR NO. op o L-0-0PH L-0-0PH L-0-03PH 44.5 4.5 4.5 5 5 5 7 5.4 5.4 5.4 G44

L- ISO 6B. Steel. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Valid diameter 5.3mm, ISO6B standard DVNGES: Large flow valve, single hand operation. PPLIION: Pneumatic tools, automotive, machinery equipment. INERHNGEBILIY: Parker Series, Rectus 3K Series, Hansen 00, EJN 0 Series WORKING PRESSURE:.6Mpa WORKING EMPERURE: -º to +º Brass material is optional PR NO. LS od L--0SM L--03SM 63. 6. 3.3 3.3 ZG/4 Z 7.8.3 PR NO. L--0PM L--03PM 43 43.5 4 7 ZG/4 Z 5. 5. PR NO. LS od L--0SF L--03SF 60. 60. 3.3 3.3 G/4 4 4 PR NO. L--0PF L--03PF 7 G/4 5. 5. PR NO. LS od o L--0SH L--0SH L--03SH 70. 75. 75. 3.3 3.3 3.3 7 4 5.5 PR NO. op o L--0PH L--0PH L--03PH 46.5 5.5 5.5 5 5 5 7 4 5.5 G45

L-35 JIS. Steel. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Valid diameter mm, Japanese standard DVNGES: Large flow valve, single hand operation. PPLIION: Pneumatic tools, automotive, machinery equipment. INERHNGEBILIY: Nitto HI-UPL Series, EJN 35 Series, Rectus K Series WORKING PRESSURE:.6Mpa WORKING EMPERURE: -º to +º Brass material is optional PR NO. LS od L-35-0SM L-35-03SM 6.8 60.8 3.3 3.3 ZG/4 Z 7.8.3 PR NO. L-35-0PM L-35-03PM 3.5.5.5 7 7 ZG/4 Z PR NO. LS od L-35-0SF L-35-03SF 57.7 57.7 3.3 3.3 G/4 4 4 PR NO. L-35-0PF L-35-03PF.5.5.5.5 7 G/4 PR NO. LS od o L-35-0SH L-35-0SH L-35-03SH 67.7 7.7 7.7 3.3 3.3 3.3 7 4 5.5 PR NO. op o L-35-0PH L-35-0PH L-35-03PH 43 48 48.5.5.5 5 5 5 7 G46

L-3 ES. Steel. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Valid diameter 7.6mm, European standard DVNGES: Large flow valve, single hand operation. PPLIION: Pneumatic tools, automotive, machinery equipment. INERHNGEBILIY: EJN 3 Series, Rectus K and 6K Series WORKING PRESSURE:.6Mpa WORKING EMPERURE: -º to +º Brass material is optional PR NO. LS od L-3-0SM L-3-03SM 63. 6. 3.3 3.3 ZG/4 Z 7.8.3 PR NO. L-3-0PM L-3-03PM 3.5.5.5 7 7 ZG/4 Z PR NO. LS od L-3-0SF L-3-03SF 60. 60. 3.3 3.3 G/4 4 4 PR NO. L-3-0PF L-3-03PF.5.5.5.5 7 G/4 PR NO. LS od o L-3-0SH L-3-0SH L-3-03SH 67.7 7.7 7.7 3.3 3.3 3.3 7 4 5.5 PR NO. op o L-3-0PH L-3-0PH L-3-03PH 43 48 48.5.5.5 5 5 5 7 G47

L-4 ISO 6B. Steel. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Valid diameter 8.mm, ISO 6B standard DVNGES: Large flow valve, single hand operation. PPLIION: Pneumatic tools, automotive, machinery equipment. INERHNGEBILIY: EJN 4 Series WORKING PRESSURE:.6Mpa WORKING EMPERURE: -º to +º Brass material is optional PR NO. LS od L-4-03SM L-4-04SM 6.3 6.8.. 6 Z ZG/.3.3 PR NO. L-4-03PM L-4-04PM 46 5 6.3 6.3 7 6 Z ZG/ 8. 8. PR NO. LS od L-4-03SF L-4-04SF 67.3 68.3.. 7. 6 G/ 4 7. PR NO. L-4-03PF L-4-04PF 4.5 47 6.3 6.3 6 G/ 8. 8. PR NO. LS od o L-4-03SH L-4-04SH 8.3 86.3.. 5 0 PR NO. op o L-4-03PH L-4-04PH 54 5 6.3 6.3 7 7 5 0 G48

L-5 ISO 6B. Steel. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Valid diameter mm, ISO 6B standard DVNGES: Large flow valve, single hand operation. PPLIION: Pneumatic tools, automotive, machinery equipment. INERHNGEBILIY: EJN 5 Series WORKING PRESSURE:.6Mpa WORKING EMPERURE: -º to +º Brass material is optional PR NO. LS od L-5-04SM L-5-06SM 7. 8.8 8. 8. 6 8 ZG/ Z 4 8 PR NO. L-5-04PM L-5-06PM 5.5 63 35 35 6 8 ZG/ Z 8 PR NO. LS od L-5-04SF L-5-06SF 78.3 7.8 8. 8. 3 6 8 G/ 7. 7. PR NO. L-5-04PF L-5-06PF 55 57 35 35 3 6 8 G/ PR NO. LS od o L-5-04SH L-5-06SH 6.3 6.3 8. 8. 5.5 0 5 PR NO. op o L-5-04PH L-5-06PH 68 68 35 35 3 3 5.6 0 5 G4

L-7 Brass. lose type. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Single hand operation, single shut-off. DVNGES: High flow valve, single hand operation. PPLIION: Pneumatic tools, measure and control equipments, and compressed air. INERHNGEBILIY: Rectus 7K Series WORKING PRESSURE:.0Mpa WORKING EMPERURE: -º to +º PR NO. LS od L-7-0SM L-7-03SM L-7-04SM 6.5 5.5 60 3.3 3.3 3.3 4 ZG/4 Z ZG/ 7 4 PR NO. L-7-0PM L-7-03PM 44 44.5 4 7 ZG/4 Z 4.6 4.6 PR NO. LS od L-7-0SF L-7-03SF L-7-04SF 58 57 60 3.3 3.3 3.3 0 G/4 G/ 4 4 4 PR NO. L-7-0PF L-7-03PF 4 4 7 G/4 4.6 4.6 PR NO. LS od o L-7-0SH L-7-0SH L-7-03SH 76 76 3.3 3.3 3.3 7 4 5 PR NO. op o L-7-0PH L-7-0PH L-7-03PH 4 5.5 5.5 5 5 5 7 4.6 4.6 4.6 G

L- Brass. lose type. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Single hand operation, single shut-off. DVNGES: Single hand operation, high flow valve, plug design optimized through greater insert depth. PPLIION: Pneumatic tools, measure and control equipments, and compressed air. INERHNGEBILIY: PL 60 Series, Rectus K Series WORKING PRESSURE:.0Mpa WORKING EMPERURE: -º to +º PR NO. LS od L--0SM L--03SM L--04SM 64.5 63 60.5 3.3 3.3 3.3 4 ZG/4 Z ZG/ 7 4 PR NO. L--0PM L--03PM.5 5 3.5 3.5 4 7 ZG/4 Z 4.8 4.8 PR NO. LS od L--0SF L--03SF L--04SF 58.5 5 60.5 3.3 3.3 3.3 0 G/4 G/ 4 4 4 PR NO. L--0PF L--03PF 4 4 3.5 3.5 7 G/4 4.8 4.8 PR NO. LS od o L--0SH L--0SH L--03SH 73 76.5 76.5 3.3 3.3 3.3 7 4 5 PR NO. op o L--0PH L--0PH L--03PH 54 5 5 3.5 3.5 3.5 5 5 5 7 4.8 4.8 4.8 G5

L-3 Brass. lose type. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Valid diameter 5.3mm, ISO6B standard. DVNGES: Large flow valve, single hand operation. PPLIION: Pneumatic tools, automotive, machinery equipment. INERHNGEBILIY: Parker Series, Rectus 3K Series, Hansen 00 Series, EJN Series. WORKING PRESSURE:.6Mpa WORKING EMPERURE: -º to +º PR NO. LS od L-3-0SM L-3-03SM L-3-04SM 6 5.5 57 3.3 3.3 3.3 4 ZG/4 Z ZG/ 7 4 PR NO. L-3-0PM L-3-03PM 43 43.5 4 7 ZG/4 Z 5. 5. PR NO. LS od L-3-0SF L-3-03SF L-3-04SF 55 54 57 3.3 3.3 3.3 0 G/4 G/ 4 4 4 PR NO. L-3-0PF L-3-03PF 7 G/4 5. 5. PR NO. LS od o L-3-0SH L-3-0SH L-3-03SH 6.5 73 73 3.3 3.3 3.3 7 4 5 PR NO. op o L-3-0PH L-3-0PH L-3-03PH 46.5 5.5 5.5 5 5 5 7 5. 5. 5. G5

L- Brass. lose type. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Valid diameter 7.6mm, European standard. DVNGES: Large flow valve, single hand operation. PPLIION: Pneumatic tools, automotive, machinery equipment. INERHNGEBILIY: EJN 3 Series, Rectus K and 6K Series. WORKING PRESSURE:.6Mpa WORKING EMPERURE: -º to +º PR NO. LS od L--0SM L--03SM L--04SM 6.5 60 5 3.3 3.3 3.3 4 ZG/4 Z ZG/ 7 4 PR NO. L--0PM L--03PM 3.5.5.5 7 7 ZG/4 Z PR NO. LS od L--0SF L--03SF L--04SF 55.5 54.5 5 3.3 3.3 3.3 0 G/4 G/ 4 4 4 PR NO. L--0PF L--03PF.5.5.5.5 7 G/4 PR NO. LS od o L--0SH L--0SH L--03SH 70 73.5 73.5 3.3 3.3 3.3 7 4 5 PR NO. op o L--0PH L--0PH L--03PH 43 48 48.5.5.5 5 5 5 7 G53

L-6 Brass. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Valid diameter 7.6mm, European standard. DVNGES: Single hand operation, steel valve locking system. PPLIION: Pneumatic tools, automotive, machinery equipment. INERHNGEBILIY: EJN 3 Series, Rectus K and 6K Series. WORKING PRESSURE:.6Mpa WORKING EMPERURE: -º to +º PR NO. LS od L-6-0SM L-6-03SM L-6-04SM 4 4 45.8.8.8 G/4 G/ 7.8 0 0 PR NO. L-6-0PM L-6-03PM L-6-04PM 33 33 7 G/4 G/ 7.8 7.8 7.8 PR NO. LS od L-6-0SF L-6-03SF L-6-04SF 4. 4. 4..8.8.8 0 0 G/4 G/ 0 0 0 PR NO. L-6-0PF L-6-03PF L-6-04PF 33 3 35 7 G/4 G/ 7.8 7.8 7.8 PR NO. LS od o L-6-0SH L-6-0SH L-6-03SH L-6-04SH 58 58 58 58.8.8.8.8.5.5 4.5 4 6 7.8 0 PR NO. op o L-6-0PH L-6-0PH L-6-03PH L-6-04PH 48 48 48 48.5.5 4.5 7.8 7.8 7.8 7.8 G54

L-DG Brass. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: Single hand operation, it is widely used in Europe market. DVNGES: Single hand operation, broad interchange, various of connections. PPLIION: Pneumatic tools, laboratories, measure and control equipments, machinery equipment. INERHNGEBILIY: EJN 3 Series, Rectus K and 6K Series. WORKING PRESSURE:.0Mpa WORKING EMPERURE: -º to +º PR NO. LS od L-DG-0SM L-DG-03SM L-DG-04SM 5.5 5.5 54.4 4 /4 / PR NO. LS od L-DG-0SF L-DG-03SF L-DG-04SF 5.5 5.5 53.5 4 /4 / PR NO. LS od L-DG-0SH L-DG-03SH L-DG-04SH 64.5 6.5 6.5 0.5 PR NO. L-DG-0PM L-DG-03PM L-DG-04PM 4 4 7 4 /4 / PR NO. o L-DG-0PF L-DG-03PF L-DG-04PF 37 7 4 /4 / PR NO. op o L-DG-0PH L-DG-03PH L-DG-04PH 5 56 56 4 4 4 0.5 G55

L-LM ISO 6 B. merican type. Brass. oupler & Nipple. Male-Male, Female-Female, Hose barb-hose barb FEURES: ISO 6B standard. DVNGES: Simple structure, light weight, various of connections. PPLIION: Pneumatic tools, automotive, compressed air, machinery equipment and compressor. INERHNGEBILIY: Parker Series, Rectus 3K, Hansen 00 Series, EJN Series. WORKING PRESSURE:.0Mpa WORKING EMPERURE: -º to +º PR NO. LS od L-LM-0SM 5 /4 L-LM-03SM 5 L-LM-04SM 53 4 / PR NO. LS od L-LM-0SF 4.5 /4 L-LM-03SF 4.5 L-LM-04SF 53.5 5 / PR NO. LS od L-LM-0SH 66 8 L-LM-03SH 68 0.5 L-LM-04SH 68 PR NO. L-LM-0PM 4 4 /4 L-LM-03PM 4 7 L-LM-04PM 44 4 / PR NO. o L-LM-0PF 3 7 /4 L-LM-03PF L-LM-04PF 44 6 / PR NO. P o L-LM-0PH L-LM-03PH L-LM-04PH 5 5 5 o o o 0.5 G56

L-LO Single handed and semiautomatic type quick coupling FEURES: Single operation, it is widely used in switzerland market. DVNGES: Simple operation, steel valve locking system. PPLIION: Pneumatic tools, producing and assembly lines, machinery equipment. INERHNGEBILIY: Parker Series, Rectus K, EJN 0 Series. WORKING PRESSURE:.0Mpa WORKING EMPERURE: -º to +º PR NO. LS od L-LO-0SM L-LO-03SM 46 47 6.8 6.8.5 /4 PR NO. LS od L-LO-0SF L-LO-03SF 43.5 45.5 6.8 6.8 /4 PR NO. LS od L-LO-0SH L-LO-03SH 5 5 6.8 6.8 7 PR NO. L-LO-0PM L-LO-03PM.5.5 4 7.5 /4 PR NO. o L-LO-0PF L-LO-03PF 35 7 /4 PR NO. HP o L-LO-0PH L-LO-03PH 48.5 48.5 7 G57