Produt desription EM onverterled 4
Table of Contents EM onverterled LED emergeny lighting ontrol gear......................................................... 4 One emergeny unit for all LED light modules; ompatible with all LED ontrol gear.................... 5 Emergeny Operation..................................................................... 6 Produt range........................................................................... 7 Seleting produt type and determining light output in emergeny operation Parameter 1: LED forward voltage.......................................................... 10 Parameter 2: LED urrent................................................................. 15 Parameter 3: Light output in emergeny operation.............................................. 17 Universal wiring diagram for LED ontrol gear Parallel wiring.......................................................................... 18 Serial wiring........................................................................... 26... Produkt desription EM onverterled 05-2014 2.0 en 3 33
Produt desription LED emergeny lighting ontrol gear Tridoni have used their extensive knowledge of LED modules and ontrol gear to develop the EM onverterled series of emergeny ontrol gear. With a range of unique operating features and ease of use EM onverterled sets new standards in LED emergeny lighting equipment.... Produkt desription EM onverterled 05-2014 2.0 en 4 33
Usage One emergeny unit for all LED light modules; ompatible with all LED ontrol gear EM onverterled is designed for use in emergeny luminaries in onjuntion with LED modules and LED ontrol gear from Tridoni and any other manufaturer. It is ompatible with LED modules for linear / area as well as downlight appliations and an be used with normal fixed output or dimming LED ontrol gear of up to 80 W power. The produt range is designed in a very small 30 x 21 x 179 mm housing, making it ideal for ompat LED luminaires where spae is at a premium. EM onverterled an be used with nikel admium (NiCd) or the smaller and more environmentally friendly nikel metalhydride (NiMH) batteries. Versions are available for 3 hours and 1 hour emergeny duration. The forward voltage range of 10 V to 200 V makes it ideal for use with most LED modules from Tridoni and other manufaturers.... Produkt desription EM onverterled 05-2014 2.0 en 5 33
Emergeny Operation Emergeny Operation When the mains supply fails, the EM onverter LED unit will swith the LED module from the normal LED ontrol gear supply to the emergeny ontrol gear supplied from batteries. This is done using 3-pole tehnology to ensure total isolation and ompatibility between the LED mains ontrol gear, emergeny ontrol gear and supply system and to ensure that the best possible EMC performane is ahieved. Immediately this swith over to emergeny operation ours the EM onverterled is deteting the total forward voltage of the LED modules onneted to adjusts the right LED urrent. The use of power ontrol tehnology ensures maximum lumen output in emergeny mode for the speified duration on any given module and battery pak.... Produkt desription EM onverterled 05-2014 2.0 en 6 33
Produt range Produt range The EM onverterled range offers 1.5 W to 5 W emergeny output power overed by a small range of produts. An EM onverterled with e.g. 3 W output power operates the onneted LED module with the rated output power of the EM onverterled. For this reason the ontrol gear is deteting the onneted LED forward voltage and adjusts the LED forward urrent to the orresponding value resulting in 3 W output power. I NOTICE At the lowest range of allowable forward voltage, the effiieny may be slightly lower. In this ase the output power is also slightly. EM onverterled 103 50V EM onverterled 104 200V Max. output power: 3 W Max. output power: 4 W Calulation P = U * I Produkt desription EM onverterled 05-2014 2.0 en 7 33
Legend P U I Emergeny output power: Given by the EM onverterled type LED forward voltage: Deteted by the EM onverterled LED forward urrent: Automatially adjusted by the EM onverterled Example: Given: LED forward voltage: (e.g.) 50 V LED forward urrent (at 50 V): 60 ma Wanted: Emergeny output power? Result: Emergeny output power: P = U * I = 50 V * 60 ma = 3 W By the use of power ontrol tehnology for the LED operation only two types of ontrol gear (EM onverterled 50V and EM onverterled 200V) are required to over all LED module types from 10 V to 200 V forward voltages. Different battery ell numbers offer flexibility in the available emergeny output power - 3 ells and 4 ells for SELV rated LED modules from 10 V to 50 V forward voltage and 4 ells or 5 ells for LED modules from 50 V to 200 V. The LED urrent in emergeny mode is automatially adjusted by the EM onverterled ontrol gear based on the total forward voltage of the LED modules onneted and the assoiated battery. The produt range offers 2 different types overing forward voltages between 10 V to 200 V. Control gear Forward voltage range SELV Number of battery ells EM onverterled 50V 10-50 V SELV < 60 V 3 ells for lower light output in emergeny operation 4 ells for higher light output in emergeny operation EM onverterled 200V 50-200 V Non-SELV 4 ells for lower light output in emergeny operation 5 ells for higher light output in emergeny operation Produkt desription EM onverterled 05-2014 2.0 en 8 33
Seleting produt type and determining light output To determine the light output in emergeny operation the following parameters are ruial: 1. 2. 3. LED forward voltage Total forward voltage of all LED modules in emergeny operation Forward voltage range of the EM onverterled ontrol gear LED urrent in emergeny operation Light output in emergeny operation... Produkt desription EM onverterled 05-2014 2.0 en 9 33
Parameter 1: LED forward voltage Parameter 1: LED forward voltage The total forward voltage of all LED modules operated in emergeny mode is used for the deision whih type of EM onverterled should be used. The total forward voltage must be within the forward voltage range of the EM onverterled ontrol gear. Total forward voltage of all LED modules The forward voltage of a single LED module an be found in the data sheet. When alulating the total forward voltage of all LED modules, series and parallel iruits must be handled differently: Series iruit Parallel iruit The values of the individual LED modules are summed up. The total value is the same as the value of a single LED module... Produkt desription EM onverterled 05-2014 2.0 en 10 33
Parameter 1: LED forward voltage Example 1: 1 LED module STARK QLE Given: Forward voltage STARK QLE: 32 V (taken from data sheet) Wanted: Total forward voltage of all LED modules in emergeny operation Appropriate emergeny ontrol gear Is the system SELV? Result:... The total forward voltage of all LED modules is 32 V beause there is only 1 LED module. The appropriate emergeny ontrol gear is EM onverterled 50V sine 32 V lies within the forward voltage range 10-50 V of this devie. The used emergeny ontrol gear EM onverterled 50V is SELV and therefore the whole system is SELV < 60 V. Produkt desription EM onverterled 05-2014 2.0 en 11 33
Parameter 1: LED forward voltage Example 2: 4 LED module STARK QLE in series Given: Forward voltage STARK QLE: 32 V (taken from data sheet) Wanted: Total forward voltage of all LED modules in emergeny operation? Appropriate emergeny ontrol gear? Is the system SELV? Result:... The total forward voltage of all LED modules is 4 x 32 V = 128 V (addition of the 4 values). The appropriate emergeny ontrol gear is EM onverterled 200V sine 128 V lies within the forward voltage range 50-200 V of this devie. The used emergeny ontrol gear EM onverterled 200V is Non SELV and therefore the whole system is Non SELV. Produkt desription EM onverterled 05-2014 2.0 en 12 33
Parameter 1: LED forward voltage Example 3: 4 LED module STARK QLE in parallel Given: Forward voltage STARK QLE: 32 V (taken from data sheeet) Wanted: Total forward voltage of all LED modules in emergeny operation? Appropriate emergeny ontrol gear? Is the system SELV? Result: The total forward voltage of all LED modules is 32 V (no addition of the 4 values in parallel iruit). The appropriate emergeny ontrol gear is EM onverterled 50V sine 50 V lies within the forward voltage range 10-50 V of this devie. The used emergeny ontrol gear EM onverterled 50V is SELV and therefore the whole system is SELV < 60 V. Produkt desription EM onverterled 05-2014 2.0 en 13 33
Parameter 1: LED forward voltage I NOTICE As Example 3 shows, parallel iruits make it possible to use multiple LED modules and still be SELV < 60 V.... Produkt desription EM onverterled 05-2014 2.0 en 14 33
Parameter 2: LED urrent Parameter 2: LED urrent Eah EM onverterled has a speifi urrent/voltage harateristi. The orresponding urrent/voltage urve an be found in the datasheet: EM onverterled 103 50V EM onverterled 104 200V Knowing the total forward voltage of all LED modules operated in emergeny, the value for the LED urrent an be read from the urrent/voltage urve: Mark the value of the total forward voltage of all LED modules on the x-axis of the graph From that point move up vertially The rossing points with the two urves define a range of values. The value of the LED urrent lies within this range. The effetive value depends on toleranes.... Produkt desription EM onverterled 05-2014 2.0 en 15 33
Parameter 2: LED urrent Example 1: 1 LED module STARK QLE Given: Total forward voltage of all LED modules: 32 V (alulated before) Wanted: LED urrent? Result: Figure: Determining LED urrent for EM onverterled BASIC 103 50V The two rossing points are at around 65 ma (minimum value) and 95 ma (maximum value). The effetive value of the LED urrent is between these two values.... Produkt desription EM onverterled 05-2014 2.0 en 16 33
Parameter 3: Light output in emergeny operation Parameter 3: Light output in emergeny operation The ratio between emergeny operation and normal operation is the same for light output and LED urrent. The values for normal operation an be found in the LED module data sheet, the value for the LED urrent in emergeny operation an be found in the EM onverterled data sheet. With this equation the light output in emergeny operation an be isolated and alulated: Example 1: 1 LED module STARK QLE Given: LED urrent in emergeny operation: approx. 65 ma (minimum value) and approx. 95 ma (maximum value) (taken from the previous example) LED urrent in mains operation 300 ma (taken from LED module data sheet) Light output in mains operation: 1,530 lm (taken from LED module data sheet) Wanted: Light output in emergeny operation? Result:... Produkt desription EM onverterled 05-2014 2.0 en 17 33
Wiring diagram for LED ontrol gear The following wiring diagrams give a step by step explanation for the onversion of a standard LED luminaire to an LED emergeny luminaire. Parallel wiring Step 1: Remove the swithed line from the LED ontrol gear and wire to the L in t erminal of the EM onverterled module. Wire the L out fro m the EM onverterled module to the ontrol gear as shown. Produkt desription EM onverterled 05-2014 2.0 en 18 33
Parallel wiring Step 2: Deide whih LED module should be operated in emergeny mode? Produkt desription EM onverterled 05-2014 2.0 en 19 33
Parallel wiring Step 3: One LED module in emergeny operation Split the LED leads to emergeny LED module and wire them to the orresponding output terminals on the EM onverterled module as shown. One LED module in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 20 33
Parallel wiring Finished wiring: One LED module in emergeny operation One LED module in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 21 33
Parallel wiring Step 3: Two LED modules in emergeny operation Two LED modules in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 22 33
Parallel wiring Finished wiring: Two LED modules in emergeny operation Two LED modules in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 23 33
Parallel wiring Step 3: All LED modules in emergeny operation All LED modules in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 24 33
Parallel wiring Finished wiring: All LED modules in emergeny operation All LED modules in emergeny operation.... Produkt desription EM onverterled 05-2014 2.0 en 25 33
Serial wiring Serial wiring Step 1: Remove the swithed line from the LED ontrol gear and wire to the L in terminal of the EM onverterled module. Wire the L out from the EM onverterled module to the ontrol gear as shown. Produkt desription EM onverterled 05-2014 2.0 en 26 33
Serial wiring Step 2: Deide whih LED module should be operated in emergeny mode? Produkt desription EM onverterled 05-2014 2.0 en 27 33
Serial wiring Step 3: One LED module in emergeny operation Split the LED leads to emergeny LED module and wire them to the orresponding output terminals on the EM onverterled module as shown. One LED module in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 28 33
Serial wiring Finished wiring: One LED module in emergeny operation One LED module in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 29 33
Serial wiring Step 3: Two LED modules in emergeny operation Split the LED leads to emergeny LED module and wire them to the orresponding input/output terminals on the EM onverterled module as shown. Two LED modules in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 30 33
Serial wiring Finished wiring: Two LED modules in emergeny operation Two LED modules in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 31 33
Serial wiring Step 3: All LED modules in emergeny operation All LED modules in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 32 33
Serial wiring Finished wiring: All LED modules in emergeny operation All LED modules in emergeny operation. Produkt desription EM onverterled 05-2014 2.0 en 33 33