PELI GUARANTEE OF EXCELLENCE Peli Products S.L.U. guarantees its products against breakage or defects in workmanship. Peli injection moulded cases are guaranteed to be watertight to a depth of. feet ( meter) for 0 minutes (IP 67) unless otherwise stated if properly closed with undamaged o-ring in place. Peli s liability is limited to the case and not its contents or foam. This guarantee does not cover the lamp or batteries (rechargeable or alkaline) for lights. Any liability, either expressed or implied, is limited to replacement of the product. This guarantee is void if the Peli product has been abused beyond normal and sensible wear and tear. This guarantee does not cover shark bite, bear attack or damage caused by children under five. Guarantee does not cover Roto moulded products. Refer to www.peli.com for full details. Fabrieksdistributeur sinds 989: Vonk B.V Voorstraat 4, 65 BT PIERSHIL www.vonkbv.com info@vonkbv.com Tel. +-(0)88-0000 Kom eens langs. Ruime Voorraad aanwezig. > CASES: SUPERIOR SHIPPING PROTECTION FOR FRAGILE INSTRUMENTS AND ELECTRONICS 00 Peli Products, S.L.U. All trademarks and logos displayed here in are registered and unregistered trademarks of Peli Products, S.L.U. and others. iphone and ipod are registered trademarks of Apple Inc. Instapak Quick RT is a registered trademark of Sealed Air Corporation. Velcro is a registered trademark of Velcro Industries B.V. Part. No. 000-RMC-00E MAR/0 Vonk B.V Voorstraat 4, 65 BT PIERSHIL www.vonkbv.com info@vonkbv.com Tel. +-(0)88-0000
> ALL PELI-HARDIGG CASES > SUPERIOR SHIPPING PROTECTION FOR FRAGILE INSTRUMENTS AND ELECTRONICS Peli-Hardigg Cases are world renowned as the From the ultimate protection of a Classic Rack, to toughest, smartest transport systems available for the removable rack option offered by SuperMAC, commercial, industrial and military shippers. Our to the smaller footprint MAC Rack and ProRack, innovative design process and rigorous testing methods Peli-Hardigg has the solution to fit your exact continue to result in superior patented advancements shipping and protection requirements. that ensure your vital, sensitive and expensive All Peli-Hardigg Rackmount Cases boast electronics remain protected. Peli-Hardigg Rackmount rugged rotomolded exterior shells that withstand Cases can take repeated drops, blows and soakings all kinds of abuse, drop after drop, in every while protecting your gear. When it comes to electronics, environment damage free. nothing protects better than a Peli- Hardigg Case. Moulded-in, tongue-in-groove gasketed parting lines seal tight and remain so after impacts Durable moulded-in colour Splash and rain resistant airtight/watertight available Reinforced corners and edges (high-stress areas) with 5 to 0% more material Patented, moulded-in metal inserts for catch and hinge attachment points provide strength and spread loads to the container wall for maximum integrity Moulded-in male/female stacking ribs for secure stacking Patented, positive anti-shear locks prevent case lids from separating from mid-section even after impact and minimise stress on hardware Shock mounts provide excellent shock and vibration cushion for delicate equipment Moulded-in ribs provide extra columnar strength One-piece rotomoulded body and lids Peli-Hardigg s patented, wide-design, Comfort Grip Handles come standard on most cases Extensive computer aided drop tests are performed at our South Deerfield test labs. Exceeds Air Transport Association (ATA) Specification 00, Category I requirements Fully recessed hardware protected from external impact damage Designed to meet ANSI/EIA-0-C for universal rack mounting hole pattern (0/ for US, M6 for International) Aircraft-quality, precision-tempered 606-T6 aluminum provides a high strength-to-weight ratio Designed to meet ANSI/EIA-0-C for universal rack mounting hole pattern Interference fit spiral spring pins in each corner for maximized structural integrity BLACKBOX ONLY BLACKBOX comes standard with rugged steel frame > G The fragility of an item is normally expressed in G units. G units are a measure of the force exerted on bodies by the earth s gravitational pull. The larger the G force needed to cause breakage, the less protection necessary from shock and vibration. For instance, an item with 0 G fragility will suffer damage when subjected to a force 0 times that of normal earth gravity. The fragility of an instrument or piece of equipment is usually determined by laboratory testing. > CHOOSING THE PERFECT MOUNT CASES From the most delicate equipment Use the following product to slightly more rugged electronics, pages to help you find the Peli has a case with the perfect exact configuration of access combination of shock, vibration and stabilizing security protection and portability. suited to your specific needs. If you require a case with a capacity beyond 50 Kg., please contact us for more options or custom solutions. G Classic Rack EXTREME DUTY ULTRA FRAGILE 5-0 SuperMAC MEDIUM DUTY MODERATE FRAGILE 40-70 MAC Rack MEDIUM DUTY MODERATE FRAGILE 50-80 Blackbox LIGHT MEDIUM DUTY SEMI FRAGILE 40-80 ProRack LIGHT DUTY SEMI FRAGILE 80-0 PELI-HARDIGG CASES PELI-HARDIGG CASES
Classic Rack EXTREME ULTRA FRAGILE DUTY 5-0 SuperMAC MEDIUM DUTY G : MODERATE FRAGILE G : 40-70 > THE ULTIMATE SHOCKPROOF SOLUTION > SUPERIOR COMPACT MOBILITY FOR -MOUNTED EQUIPMENT Peli-Hardigg s extra rugged, rotomoulded Classic Rack Cases have demonstrated their strength thousands of times over by saving ultra-fragile equipment from damage during transport. Our proven 9" EIA Classic Rack is the strongest, most secure rack in the industry. Our precision-tuned, elastomeric, shock mount systems provide maximum protection for ultra-fragile equipment from shock and vibration nothing protects better than a Classic Rack from Peli-Hardigg. Cut away, exposing shock mount and rack frame*. SuperMAC is our most compact container with a removable rack option, making field deployment and equipment integration easier than ever before. SuperMAC s innovative design makes strategic use of every interior centimetre, allowing ample space for wiring and equipment integration while providing medium duty protection. The optional removable rack system slides open as easily as a file drawer, allowing full access to equipment. Sensitive electronic equipment mounted in a SuperMAC case can survive the day-to-day falls, vibrations and other stressors that cause competitors rack cases to fail. Ideal for delicate equipment that requires the most protection available, in the widest range of sizes. Individually fine-tuned shock mounts for each application provide excellent shock and vibration dampening plus cooling airflow for operating equipment. Security for equipment from 9-50 Kg. Recessed, zinc-plated, yellow chromate hardware holds up under duress and use. Tool-free rack removal. Rack mountable precision test equipment. Electro-mechanical. Medical and biological diagnostic equipment, memory storage devices. Meteorological instruments. Mobile operations. Broadcast and video gear. Laboratory equipment. Aerospace instrumentation. Servers, military mission planning. Command and control equipment. Flight simulators. Shock mounts isolate equipment from vibration as well as impact forces. Shock mounts vary in size depending on protection requirements from delicate equipment to rugged electronics, and can control impact forces from 5 G s to 0 G s. Textured low visibility finish for unobtrusive storage and transport. Patented Comfort Grip Handles TM make lifting easy. Recesses, cobalt black hardware is long-lasting and fastens securely. 4" (6cm) wide - two cases can fit side-by-side in most military vehicles. Moulded-in rib design provides secure stacking and interlock. Protection for equipment from 9-90Kg. Patent pending shock mount design. Removable rack features Lock N Load TM, a quick latch system that locks racks securely into place for transit, unlike competitive models that can slide freely upon impact. Space-saving, light weight case with a removable rack option. Moulded-in lid hangers allow lid to hang easily from the side of the case. Field-deployed equipment. Sheltered applications. Control consoles and panels. Radar and Microwave antennas. Solid-state circuit electronics. Radio, TV and communications equipment. * Rack frame design subject to change. 4 PELI-HARDIGG CASES PELI-HARDIGG CASES 5
MEDIUM DUTY MAC Rack MODERATE FRAGILE 50-80 G : LIGHT MEDIUM DUTY Blackbox SEMI FRAGILE G : 40-80 > COMPACT, LIGHT WEIGHT AND SHOCKPROOF TRANSPORTS > LIGHT WEIGHT AND COMPACT These light weight, compact, and double ended cases offer light to medium duty protection and boast significantly better light duty shock performance than the competition. The use of recycled materials in the shell and a sturdy steel frame offer great value while upholding Peli-Hardigg s industry-leading standards. When you need to be cost-conscious but can t sacrifice performance, BlackBox is the answer. Compact and light weight MAC Rack Cases boast a smaller footprint to make the most of limited space. These minimised cubes protect with the same rugged rotomoulded outer shell and 9 EIA shock mounted rack as the Classic Cases, but with a smaller sway space. Inside, delicate equipment and instruments travel and perform while protected from shock, vibration, moisture, and impact. Perfect for shipping around the world or just moving down the hall MAC Racks give you all the needed shock and vibration protection plus a more efficient use of space. Casters even come standard on the 5-inch-size (cm) lids for total portability. If it s versatility as well as protection you re looking for, MAC Rack is the case to get you there and back again and again. Compact and light weight. Shock mounts designed for 9-90 Kg. provide shock and vibration dampening and cooling airflow while minimising the case size. Often used when space and weight are critical along with shock and vibration protection. Recessed, cobalt black hardware fastens tight and endures. Patented Comfort Grip Handles TM make lifting ergonomic. 5" lids (cm) include smooth rolling edge casters. Field deployed applications. Sheltered applications. Solid-state circuit electronics. Radar and microwave antennas. Control consoles and panels. Radio, TV and communications equipment. Compact and light weight. Shock mounts provide " (5cm) of sway space to isolate equipment. Molded-in rib design provides secure stacking and interlock. Black hardware is long-lasting and fastens securely. Patented Comfort Grip Handles TM make lifting ergonomic. Automatic pressure relief valve. Two edge casters. Airtight and watertight. Audio/Video recording and processing systems. Satellite communication systems. Radio communication systems. Seismic data recording instrumentation. Climate data collection. Protection for equipment up to 45 Kg. 6 PELI-HARDIGG CASES PELI-HARDIGG CASES 7
ProRack LIGHT DUTY SEMI FRAGILE 80-0 G : > CLASSIC SUPERMAC MAC OPTIONS > EQUIPMENT PROTECTION WITH MINIMAL FORM FACTOR Casters Edge Casters (Std. on MAC with 5 lid (cm) Caster Storage in Lid Metal or Comfort Grip Handles Extra Handles Card Holder ID Plate Front Labels Standard Labels Custom Stenciling Airtight/Watertight Capability Coupling Catches Humidity Indicator Lid Hangers ProRack Cases are the ideal option when you need a light weight, space-efficient, front and rear opening container, but not a shock mounted system. Add accessories such as coupling catches for locking stability, removable casters or extra threaded rack clips to suit your exact needs. This is the toughest small case available for security, rain, immersion, dust and impact. Lid Storage Pouch Lift Rings/ Tie Down Rings Leg Kit Chair or Table Lockable Cable Catch ( set of 4 ea) Removable Rack System Stainless Steel Hardware (clear or black passivated finish) /8 (,5/0cm) Wider Frame typically used with slides mounted on inside of uprights Fixed Bottom Support Rails (bottom view) Adjustable Vertical Supports Adjustable Horizontal Supports Bezel Plate Drawers Keyboard Tray Rack Slides (#85 Capacity) > PRO OPTIONS Additional ProRack Options also available from chart above. Rugged 8" (46cm) deep cases, with aircraft aluminum frames mounted directly to the case shell protects your gear from direct impact transmission. Compact size and light weight cases. Designed for equipment up to 4 Kg. Field-deployed amplifiers and electronic, medical or testing equipment components. Shelf Stainless Steel Hardware (instead of standard zinc, yellow chromate finish) Extra Threaded Rack Clips Coupling Catches Rear Rack Frame (rear view) Shelves, Fixed and Sliding Panel Screws with Washers (50 ea) Recessed, zinc-plated, yellow chromate hardware holds up under extreme conditions. The water in the jar demonstrate to engineers the intense vibration a case withstands, while the jar attached to the equipment is calm, indicating a safe shock level (Shock mount technology does not apply to ProRack Cases). > OPTIONAL COLOURS FOR ALL CASES Gray Fed Std# 670 Yellow Fed Std# 58 Tan 50 Fed Std# 07 Maroon 97 Pantone# 0U Blue 5(lt) Pantone# 9U Blue 0(dk) Fed Std# 505 White Fed Std# 795 Black 0 Fed Std# 7040 Yellow 6 Pantone# 0U Red 0 Fed Std# 05 Note: Some options are not available on all case sizes and availability is subject to change at manufacturer s discretion. Case colours/options may differ slightly from printed versions. Green 8(forest) Fed Std# 405 Olive Drab 7 Fed Std# 4096 Orange 4 Fed Std# 97 Purple 9 Pantone# 45U 8 PELI-HARDIGG CASES PELI-HARDIGG CASES 9
> CLASSIC SUPERMAC MAC OPTIONS > CLASSIC SPECIFICATIONS CLASSIC, SUPERMAC, AND MAC DETAIL WEIGHT SHIPPING > Classic Rack LID I.D. HEIGHT HEIGHT U SIZE FRONT/ O.D. O.D. O.D. CUBE DE40-0/4/0.5 /.5.0 8 4 9.5 6. 0.7 DE40-0/4/05 U 5.5 0 508 9 48.5 / 5.5 4.8 88 7.0 686. 44 0.0 6.7 0.9 DE40-05/4/05 5.5 / 5.5 7.5 95 45 0.4 7. 0.0 DE4-0/4/0.5 /.5.0 8 50.7 7. 0. DE4-0/4/05 4U 7.00 78 0 508 9 48.5 / 5.5 4.8 88 7.0 686 4.6 7 5. 7.9 0. DE4-05/4/05 5.5 / 5.5 7.5 95 5.6 8.6 0.4 DE44-0/4/0.5 /.5.0 8 5.6 8. 0.4 DE44-0/4/05 5U 8.75 0 508 9 48.5 / 5.5 4.8 88 7.0 686 6.6 4 54 4.5 9.0 0.6 DE44-05/4/05 5.5 / 5.5 7.5 95 56 5.4 9.7 0.8 DE44-0/7/0 5 4.0 9. 0.6 DE44-0/7/05 5U 8.75 5 65 9 48.5 / 5.5 7.6 956 7.0 686 6.6 4 55 4.9 9.8 0.8 DE44-05/7/05 5.5 / 5.5 40.4 06 57 5.9 0.5 0.0 DE46-0/4/0.5 /.5.0 8 56 5.4 9. 0.6 DE46-0/4/05 6U 0.50 67 0 508 9 48.5 / 5.5 4.8 88 7.0 686 8.6 47 57 5.9 0. 0.9 DE46-05/4/05 5.5 / 5.5 7.5 95 59 6.8 0.9 0. DE46-0/7/0 57 5.9 0. 0.9 DE46-0/7/05 6U 0.50 67 5 65 9 48.5 / 5.5 7.6 956 7.0 686 8.6 47 59 6.8 0.9 0. DE46-05/7/05 5.5 / 5.5 40.4 06 60 7..7 0. DE48-0/0/0.5 /.5 7.5 699 59 6.8 8.9 0.5 DE48-0/0/05 7U.5 8 457 9 48.5 / 5.5 0. 768 7.0 686 0.6 54 6 7.7 9.7 0.8 DE48-05/0/05 5.5 / 5.5.0 88 6 8.6 0.6 0.0 DE48-0/7/0 60 7.. 0. DE48-0/7/05 7U.5 5 65 9 48.5 / 5.5 7.6 956 7.0 686 0.6 54 6 8.. 0.4 DE48-05/7/05 5.5 / 5.5 40.4 06 64 9.0.0 0.7 DE4-0/7/0 70.8. 0.7 DE4-0/7/05 9U 5.75 400 5 65 9 48.5 / 5.5 7.6 956 7.0 686 4. 66 7. 4. 0.40 DE4-05/7/05 5.5 / 5.5 40.4 06 7. 5. 0.4 WEIGHT SHIPPING > Classic Rack HEIGHT LID I.D. HEIGHT U SIZE FRONT/ O.D. O.D. O.D. CUBE * DE-0/8/0.5 /.5 5.5 648 47. 8.6 0.4 * DE-0/8/05 0U 7.50 445 7 4 9 48.5 / 5.5 8. 78 4.0 60 4. 66 49. 9.5 0.7 * DE-05/8/05 5.5 / 5.5.0 787 5. 0.4 0.0 * DE-0/0/0.5 /.5 7.5 95 76 4.5.6 0.6 * DE-0/0/05 0U 7.50 445 8 7 9 48.5 / 5.5 40. 0 4.0 60 4. 66 78 5.4.6 0.8 * DE-05/0/05 5.5 / 5.5 4.0 09 80 6. 4.5 0.4 DE45-0/7/0 75 4.0 5. 0.4 DE45-0/7/05 U 9.5 489 5 65 9 48.5 / 5.5 7.6 956 7.0 686 7.9 709 78 5.4 6.4 0.46 DE45-05/7/05 5.5 / 5.5 40.4 06 8 6.7 7.6 0.50 DE40-0/7/0 79 5.8 8.0 0.5 DE40-0/7/05 4U 4.50 6 5 65 9 48.5 / 5.5 7.6 956 7.0 686.0 88 8 6.7 9.4 0.55 DE40-05/7/05 5.5 / 5.5 40.4 06 8 7.6 0.8 0.59 DE44-0/7/0 0 46.7 4. 0.69 DE44-0/7/05 U 6.75 9 5 65 9 48.5 / 5.5 7.6 956 7.0 686 44.6 05 47.6 6. 0.74 DE44-05/7/05 5.5 / 5.5 40.4 06 07 48.5 8. 0.80 DE65-0/5/0.5 /.5.5 86 9 54.0 9.8 0.84 DE65-0/5/05 6U 45.50 56 584 9 48.5 / 5.5 5. 895 9.0 77 54.6 87 54.9. 0.9 DE65-05/5/05 5.5 / 5.5 8.0 965 55.8 4.8 0.99 DE40-0/5/0.5 /.5 4.0 09 50.0.7 8. 0.4 DE40-0/5/05 U 5.5 88 9 48.5 / 5.5 45.8 6 7.0 686. 5.0. 8.8 0.5 DE40-05/5/05 5.5 / 5.5 48.5 5.0.6 9. 0.6 DE4-0/5/0.5 /.5 4.0 09 5.0 4.0 9.8 0.8 DE4-0/5/05 4U 7.00 78 88 9 48.5 / 5.5 45.8 6 7.0 686 4.6 7 54.0 4.5 0.5 0.0 DE4-05/5/05 5.5 / 5.5 48.5 55.0 5.0. 0. DE44-0/5/0.5 /.5 4.0 09 54.0 4.5. 0. DE44-0/5/05 5U 8.75 88 9 48.5 / 5.5 45.8 6 7.0 686 6.6 4 56.0 5.4.9 0.7 DE44-05/5/05 5.5 / 5.5 48.5 58.0 6..6 0.6 DE48-0/5/0.5 /.5 4.0 09 6.0 8.6.8 0.9 DE48-0/5/05 7U.5 88 9 48.5 / 5.5 45.8 6 7.0 686 0.6 54 65.0 9.5 4.7 0.4 DE48-05/5/05 5.5 / 5.5 48.5 67.0 0.4 5.6 0.44 DE4-0/5/0.5 /.5 4.0 09 7.0. 6. 0.46 DE4-0/5/05 9U 5.75 400 88 9 48.5 / 5.5 45.8 6 7.0 686 4. 66 7.0.7 7.4 0.49 DE4-05/5/05 5.5 / 5.5 48.5 74.0.6 8.4 0.5 * Reduced Sway Space - Special shock mounts required - Lid Outside Dimension (O.D.) = Lid I.D. plus.5 (,cm) per lid - Length includes stacking ribs - Height excludes.0 (,5cm) stacking ribs 0 PELI-HARDIGG CASES PELI-HARDIGG CASES
> SUPERMAC MAC SPECIFICATIONS > MAC SPECIFICATIONS > Super MAC HEIGHT LID I.D. HEIGHT WEIGHT SHIPPING U SIZE FRONT/ O.D. O.D. O.D. 4 CUBE SMAC 09-0/9/0 48.8 5.5 0.6 SMAC 09-0/9/05W U 5.5 4 60 9 48. / 5. 8.5 978.8 60.4 89 50.7 6.0 0.7 SMAC 09-05/9/05W 5. / 5. 4.5 054 5.6 6.5 0.8 SMAC -0/9/0 5. 6.4 0.8 SMAC -0/9/05W 4U 7.00 78 4 60 9 48. / 5. 8.5 978.8 60. 5 4.0 6.9 0.0 SMAC -05/9/05W 5. / 5. 4.5 054 55 4.9 7.5 0. SMAC -0/9/0 5 4.0 7. 0. SMAC -0/9/05W 5U 8.75 4 60 9 48. / 5. 8.5 978.8 60 4.9 78 55 4.9 7.9 0. SMAC -05/9/05W 5. / 5. 4.5 054 57 5.9 8.5 0.4 SMAC 6-0/9/0 57 5.9 9.0 0.5 SMAC 6-0/9/05W 7U.5 4 60 9 48. / 5. 8.5 978.8 60 8.4 467 60 7. 9.7 0.8 SMAC 6-05/9/05W 5. / 5. 4.5 054 6 8. 0.5 0.0 SMAC 9-0/9/0 6 7.7 0.7 0.0 SMAC 9-0/9/05W 9U 5.75 400 4 60 9 48. / 5. 8.5 978.8 60.9 556 64 9.0.6 0. SMAC 9-05/9/05W 5. / 5. 4.5 054 66 9.9.5 0.5 SMAC -0/9/0 66 9.9.4 0.5 SMAC -0/9/05W U 9.5 489 4 60 9 48. / 5. 8.5 978.8 60 5.4 644 69..4 0.8 SMAC -05/9/05W 5. / 5. 4.5 054 7. 4.5 0.4 SMAC 8-0/9/0 7. 4.9 0.4 SMAC 8-0/9/05W 4U 4.50 6 4 60 9 48. / 5. 8.5 978.8 60 0.6 778 74.6 6. 0.46 SMAC 8-05/9/05W 5. / 5. 4.5 054 77 4.9 7.5 0.49 > MAC Rack HEIGHT U SIZE - Lid Outside Dimension (O.D.) = Lid I.D. plus. (,cm) on 5. (,cm) lids and plus. (,8cm) on. (5,6cm) lids - Length includes stiffening ribs, with metal handles installed LID I.D. FRONT/ O.D. O.D. - Width listed is calculated with metal handles installed on sides 4 - Height excludes.44 (,cm) stacking ribs HEIGHT WEIGHT SHIPPING O.D. 4 CUBE MR907-0/5/0.9.8 0. MR907-0/5/05 U 5.5 0 508 9 48. / 4.4.6 85.0 559 9.6 44 4.5 4. 0. MR907-05/5/05 4.4 / 4.4 6. 97 5. 4.4 0. MR907-0/9/0 4.5 4. 0. MR907-0/9/05 U 5.5 4 60 9 48. / 4.4 7.6 955.0 559 9.6 44 5.0 4.6 0. MR907-05/9/05 4.4 / 4.4 40. 09 4 5.4 4.9 0.4 MR909-0/5/0 5. 4.5 0. MR909-0/5/05 4U 7.00 78 0 508 9 48. / 4.4.6 85.0 559.4 89 5 5.8 4.9 0.4 MR909-05/5/05 4.4 / 4.4 6. 97 6 6. 5. 0.5 MR909-0/9/0 5 5.6 5. 0.4 MR909-0/9/05 4U 7.00 78 4 60 9 48. / 4.4 7.6 955.0 559.4 89 6 6. 5.4 0.5 MR909-05/9/05 4.4 / 4.4 40. 09 7 6.9 5.8 0.6 MR90-0/5/0 6 6.5 5. 0.5 MR90-0/5/05 5U 8.75 0 508 9 48. / 4.4.6 85.6 575. 8 7. 5.8 0.6 MR90-05/5/05 4.4 / 4.4 6. 97 9 7.6 6. 0.8 > MAC Rack HEIGHT U SIZE LID I.D. FRONT/ O.D. O.D. HEIGHT WEIGHT SHIPPING O.D. 4 CUBE MR90-0/9/0 7 7.0 6.0 0.7 MR90-0/9/05 5U 8.75 4 60 9 48. / 4.4 7.6 955.6 575. 9 7.6 6.5 0.8 MR90-05/9/05 4.4 / 4.4 40. 09 40 8. 6.9 0.0 MR9-0/5/0 9 7.8 6. 0.7 MR9-0/5/05 6U 0.50 67 0 508 9 48. / 4.4.6 85.6 575 4.9 78 4 8.4 6.5 0.9 MR9-05/5/05 4.4 / 4.4 6. 97 4 9.0 7.0 0.0 MR9-0/9/0 40 8. 6.8 0.9 MR9-0/9/05 6U 0.50 67 4 60 9 48. / 4.4 7.6 955.6 575 4.9 78 4 8.9 7. 0. MR9-05/9/05 4.4 / 4.4 40. 09 4 9.5 7.8 0. MR94-0/5/0 4 9. 6.8 0.9 MR94-0/5/05 7U.5 0 508 9 48. / 4.4.6 85.6 575 6.6 4 4 9.5 7. 0. MR94-05/5/05 4.4 / 4.4 6. 97 44 0.0 7.9 0. MR94-0/9/0 4 8.8 7.6 0. MR94-0/9/05 7U.5 4 60 9 48. / 4.4 7.6 955.6 575 6.6 4 44 0. 8. 0. MR94-05/9/05 4.4 / 4.4 40. 09 47. 8.7 0.5 MR97-0/5/0 46 0.9 8. 0. MR97-0/5/05 9U 5.75 400 0 508 9 48. / 4.4.6 85.6 575 0. 5 47. 8.9 0.5 MR97-05/5/05 4.4 / 4.4 6. 97 48.9 9.5 0.7 MR97-0/9/0 47. 9. 0.6 MR97-0/9/05 9U 5.75 400 4 60 9 48. / 4.4 7.6 955.6 575 0. 5 48.9 9.9 0.8 MR97-05/9/05 4.4 / 4.4 40. 09 49.4 0.6 0.0 MR9-0/5/0 50.6 9.6 0.7 MR9-0/5/05 U 9.5 489 0 508 9 48. / 4.4.6 85.6 575.6 600 5. 0.4 0.9 MR9-05/5/05 4.4 / 4.4 6. 97 5.6. 0. MR9-0/9/0 5. 0.8 0. MR9-0/9/05 U 9.5 489 4 60 9 48. / 4.4 7.6 955.6 575.6 600 5.6.6 0. MR9-05/9/05 4.4 / 4.4 40. 09 5 4..4 0.5 MR9-0/5/0 5.5 0. 0.9 MR9-0/5/05 U.00 5 0 508 9 48. / 4.4.6 85.6 575 5.4 644 5 4.0. 0. MR9-05/5/05 4.4 / 4.4 6. 97 54 4.6.0 0.4 MR9-0/9/0 5 4.0.7 0. MR9-0/9/05 U.00 5 4 60 9 48. / 4.4 7.6 955.6 575 5.4 644 54 4.6.5 0.5 MR9-05/9/05 4.4 / 4.4 40. 09 55 5.. 0.8 MR96-0/5/0 56 5.4.8 0. MR96-0/5/05 4U 4.50 6 0 508 9 48. / 4.4.6 85.6 575 8.9 74 57 5.7.7 0.6 MR96-05/5/05 4.4 / 4.4 6. 97 57 5.9.7 0.9 MR96-0/9/0 57 5.9. 0.8 MR96-0/9/05 4U 4.50 6 4 60 9 48. / 4.4 7.6 955.6 575 8.9 74 58 6. 4. 0.40 MR96-05/9/05 4.4 / 4.4 40. 09 58 6.4 5. 0.4 - Lid Outside Dimension (O.D.) = Lid I.D. plus. (,cm) on 4.4 (,cm) lids and plus (,54cm) on. (5,6cm) lids - Length includes stacking ribs - Width listed is calculated with plastic handles installed on sides which is standard. U, 4U and 5U cases come standard with stainless steel handles all around. 4 - Height excludes.44 (,cm) stacking ribs PELI-HARDIGG CASES PELI-HARDIGG CASES
> CLASSIC BLACKBOX PRO SUPERMAC MAC OPTIONS > CUSTOM SOLUTIONS PELI LIGHTING CASES SPECIALTY CASES > BlackBox HEIGHT U SIZE LID I.D. FRONT/ O.D. O.D. 4 HEIGHT WEIGHT SHIPPING O.D. CUBE BlackBox U U 5.5 4 60 9 48. / 5. 8.5 978 4.6 65.4 89 4 9. 6. 0.8 BlackBox 4U 4U 7.00 78 4 60 9 48. / 5. 8.5 978 4.6 65. 47. 7. 0.0 BlackBox 5U 5U 8.75 4 60 9 48. / 5. 8.5 978 4.6 65 4.9 78 48.8 8. 0. BlackBox 7U 7U.5 4 60 9 48. / 5. 8.5 978 4.6 65 8.4 467 5. 0. 0.9 BlackBox 9U 9U 5.75 400 4 60 9 48. / 5. 8.5 978 4.6 65.9 556 56 5.4.0 0.4 BlackBox U U 9.5 489 4 60 9 48. / 5. 8.5 978 4.6 65 5.4 644 60 7..9 0.9 BlackBox 4U 4U 4.50 6 4 60 9 48. / 5. 8.5 978 4.6 65 0.6 778 66 9.9 6.8 0.48 - Lid Outside Dimension (O.D.) = Lid I.D. plus. (,cm) on 5. (,cm) lids and plus. (,8cm) on. (5,6cm) lids - Length includes stiffening ribs - Height excludes.44 (,cm) stacking ribs 4 - Width is based on measurements with installed comfort grip handles > STANDARD AND CUSTOM SOLUTION EXPERTS We understand that a case has to do more than look good. It has to take whatever the world dishes out without putting your gear at risk. After all, your equipment is more than a set of tools it s a fundamental part of the way you do business. Since 954, Peli-Hardigg Cases have been designed to survive the harshest environments on earth, from the Sahara to the Antarctic. Our cases can take repeated drops, blows and soakings while our patented shell design and solid aircraft-quality rackmounts cushion your gear from interference. No other protective cases in the industry look or perform as well when it comes to safeguarding your vital or expensive equipment. While Peli-Hardigg Cases offers the widest range of standard sizes and configurations in the container industry, many scientific, industrial, military, and commercial equipment systems require a customized solution. If our selection of cases does not match your needs exactly, we will custom design a case that does. Contact us through www.pelihardigg.co.uk or www.pelihardigg.eu or call + 48 5 50 / +44 (0) 895895 PRO DETAIL REMOTE AREA LIGHTING SYSTEMS LIGHTS PELI AND PELI STORM CASES MICRO CASES SPECIALTY PRODUCTS WEIGHT SHIPPING > ProRack HEIGHT LID I.D. HEIGHT U SIZE FRONT O.D. O.D. O.D. CUBE PART NO. U in mm in mm in mm in mm in mm in mm in mm lbs kg ft m PR008-0/8/0 4U 7.00 77.8 8 457 9 48.8 46 559.4 568. 86 0.9 9.5. 0.09 PR0-0/8/0 6U 0.50 66.7 8 457 9 48.8 46 559.4 568 4.8 75.9 0.8 4. 0. PR05-0/8/0 8U 4.00 55.6 8 457 9 48.8 46 559.4 568 8. 464 7..4 5. 0.5 PR06-0/8/0 4U 4.50 6. 8 457 9 48.8 46 559.4 568 8.0 7 6. 6.5 8.0 0. - Lid Outside Dimension (O.D.) = Lid I.D. plus 0. (0,5cm) per lid - Height excludes 0.5 (,cm) stacking ribs - Length includes stacking ribs The variance in rack length based on non shock mounted frame 7 rack frame is only obtained by purchasing extra rack frame for the rear of the case, 7 rack length may vary this is not a shock mounted rack > LEARN ABOUT OTHER PELI PRODUCTS AT WWW.PELI.COM Our success is based on your success, that s why we take pride in engineering the best products for the job. Our products range from flashlights that illuminate the world s darkest and dangerous places, to cases that protect fragile equipment in the toughest environments. ADVANCED LIGHTING SOLUTIONS Safety approved lights for hazardous areas Tactical lights for military and law enforcement Specialised lights for fire and rescue operations CASE AND SPECIALTY PRODUCT SOLUTIONS Watertight cases for wet conditions Long cases for military and law enforcement Specialised laptop and organization solutions for off site jobs Micro Case protection for small electronics Specialty products for portable workspace and organisation solutions Submersible lights for diving 4 PELI-HARDIGG CASES PELI-HARDIGG CASES 5