AIRTEK Front System for Mack Vehicles

AIRTEK Front System for Mack Vehicles LIT NO: SP-180 DATE: March 015 REVISION: G AIRTEK with STEERTEK NXT Axle Vehicles built AFTER July 011 AIRTEK with STEERTEK Axle Vehicles built PRIOR to July 011

Vehicles built with STEERTEK NXT axle after July, 011 b a 1b 9 7 1a 8 44 4 39 7 (13./14.6K Only) L.H. Side Shown 4 47 9 44 43 39 1a 11 4 3 8 4 3 5 6 5 15 14 1 16 1 14 13 10 6 13 14 1 16 6 0 14 1 15 45 46 17 45 46 6 1 8 30 9 18 9 30 6 7 38 37 36 3 35 33 40 41 40 41 31 37 38 6 19 36 3 35 34 SP-180

KEY NO. PART NO. DESCRIPTION NO.REQ. KEY NO. PART NO. DESCRIPTION NO.REQ. 1 Air Spring a 66349-00L 1K/1.5K b 60716-00L 13.K/14.6K Air Spring Bracket 60757-000 1K/1.5K 66 Rail 60976-000 1K/1.5K 300 Rail a 60738-001 13.K/14.6K 66 Rail b 60738-00 13.K/14.6K 300 Rail 3 64838-003L Shock Absorber 4 594-008 Upper Shock Bracket 5 5316-000 Leaf Spring Assembly with Bushings Includes Key No. 6 6 **Steel Galvanized Liner 7 *Front Spring Hanger 8 64486-000 Inboard Spring Adapter 9 588-009 M0 x.5-6g 0 mm Hex Bolt LH Rear Shackle Bracket Service Kit, One Side Includes Key Nos. 10, 1-15 60961-679 66 Frame Rail 60961-680 300 Frame Rail RH Rear Shackle Bracket Service Kit, One Side Includes Key Nos. 11-15 60961-681 66 Frame Rail 60961-68 300 Frame Rail 10 LH Rear Shackle Bracket w/bushing 1 (Cast Part No. 64153-001) 68548-001 66 Frame Rail 68554-001 300 Frame Rail 11 RH Rear Shackle Bracket w/bushing 1 (Cast Part No. 64153-00) 68548-00 66 Frame Rail 68554-00 300 Frame Rail 60961-635 Shackle Bracket Service Kit, Axle Set, Includes Key Nos. 1-16 1 64794-000 Shackle Plate 4 13 588-09 M0 x.5-6g 160 mm Hex Bolt, 6 Replaces 588-008 14 586-09 M0 Flat Washer, Replaces 586-009 1 15 589-003 M0 x.5-6h Locknut, Replaces 589-001 6 16 60631-00 Shackle Stop Spacer 68957-0XX STEERTEK NXT Axle Assembly, Includes Key 1 Nos. 17-1, 7-9, 31, 35-36, Contact Hendrickson Tech Services for Part Number 17 Axle & Kingpin Assembly, 70.9 KPI 1 68956-003M 1K/1.5K, 338/366 mm Ride Ht., 4. Drop 68956-004M 1K/1.5K, 338 mm Ride Ht., 5.36 Drop 68956-005M 13.K/14.6K, 338/366 mm Ride Ht., 4. Drop 68956-006M 13.K/14.6K, 338 mm Ride Ht., 5.36 Drop 18 LH Lower Steering Knuckle Assembly, Includes 1 Key Nos. -6, 30, 37-38 58900-407 <190 Ackermann STD Hub 58900-409 >190 Ackermann STD Hub 58900-417 <190 Ackermann Unitized Hub 58900-419 >190 Ackermann Unitized Hub 19 RH Lower Steering Knuckle Assembly, Includes 1 Key Nos. -6, 30, 37-38 58900-408 <190 Ackermann STD Hub 58900-410 >190 Ackermann STD Hub Not Shown 58900-418 <190 Ackermann Unitized Hub Not Shown 58900-40 >190 Ackermann Unitized Hub 0 LH Upper Steering Knuckle Assembly, Includes 1 Key Nos. -, -6 60903-411 338 mm Ride Height 60903-413 366 mm Ride Height 1 60904-40 RH Upper Steering Knuckle Assembly, Includes 1 Key Nos. -, -6 60961-68 Kingpin Bushing and Bearing Service Kit, Axle Set, Includes Kit Nos. 60961-69 & -630 60961-69 LH Kingpin Bushing w/composite Thrust Bearing Service Kit, Includes Key Nos. -7, 9 & Loctite 60961-630 RH Kingpin Bushing w/roller Thrust Bearing Service Kit, Includes Key Nos. -6, 8-9 & Loctite 33117-000 Grease Zerk 68687-003 Grease Cap Assembly, Upper 68687-00 Grease Cap Assembly, Lower 58909-001 Kingpin Bushing 4 60961-631 Thrust Bearing Service Kit, Axle Set, Includes Kit Nos. 60961-63 & 60961-633 60961-63 LH Composite Thrust Bearing Service Kit, Includes Key Nos. 6-7, 9 & Loctite 60961-633 RH Roller Thrust Bearing Service Kit, Includes Key Nos. 6, 8-9 & Loctite 6 68731-000 Kingpin Seal 4 7 5988-000 LH Composite Thrust Bearing 1 8 646-000 RH Roller Thrust Bearing 9 606-001 5 /8"-11 UNC Socket Head Cap Screw 4 Not Shown 60937-000 Loctite (Red) Compound Tube 1 30 646-000 ABS Sensor Sleeve 31 ***Tie Rod Assembly, Includes Key Nos. 3-34 1 See Selection Guide on page 8 3 ** 7 8" Castle Nut ***Tie Rod End Service Kit, Axle Set, Includes LH and RH Tie Rod End Service Kits, See Selection Guide on page 8 ***LH Tie Rod End Service Kit, Includes Key Nos. 33, 35-36, See Selection Guide on page 8 ***RH Tie Rod End Service Kit, Includes Key Nos. 34-36, See Selection Guide on page 8 33 ***LH Tie Rod End, See Selection Guide 1 on page 8 34 ***RH Tie Rod End, See Selection Guide 1 on page 8 35 96-007 7 8" Flat Washer 36 17800-004 Tie Rod Nut Cotter Pin 37 608-001 ½"-13 UNC Square Head Bolt 38 600-000 ½"-13 UNC Hex Jam Nut U-bolt Clamp Group Service Kit, One Side, Includes Key Nos. 39-41 1K/1.5K and 13.K/14.6K 64106-0 338 mm Ride Height 64106-0 366 mm Ride Height 39 M0 x.5-6g U-bolt, 4 1K/1.5K and 13.K/14.6K 65663-005 338 mm Ride Height, Bolt Length mm 65663-006 366 mm Ride Height, Bolt Length 75 mm 40 586-009 M0 Flat Washer 8 41 6507-001 M0 x.5-6h Nylon Locknut 8 4 LH Top Pad Assembly 1 69659-001 66 Frame Rail 69660-001 300 Frame Rail 43 RH Top Pad Assembly 1 69659-00 66 Frame Rail 69660-00 300 Frame Rail 44 64080-000 Rubber Axle Stop 45 Dowel Pin 57159-004 338 mm Ride Height, 66.8 mm 57159-008 366 mm Ride Height, 94.8 mm 46 64318-08 Axle Spacer, 366 mm Ride Height, 8 mm 47 64166-000 Air Spring Adapter for Top Pad 13.K/14.6K Only SP-180 3 See Notes on Page 6

Vehicles built with STEERTEK axle and Post 007 Engine, prior to July 011 b a 1b (1/1.5K Only) 1a 54 (13./14.6K Only) L.H. Side Shown 47 7 44 7 1a (1/1.5K Only) 9 5 3 8 4 5 49 47 6 50 10 17 15 16 13 1 8 5 9 44 49 53 6 48 4 3 17 11 40 4 14 15 13 1 51 40 4 16 15 13 1 14 1 13 15 8 30 31 9 33 37 19b L.H. Side Shown Straight Spindle For Unitized Hub 9 31 19a 1 38 39 36 33 37 8 30 6 8 45 46 43 41 18 45 46 43 41 7 8 38 39 35 0 36 34 3 4 SP-180

KEY NO. PART NO. DESCRIPTION NO.REQ. KEY NO. PART NO. DESCRIPTION NO.REQ. 1 Air Spring a 66349-00L 1K/1.5K, Replaces 60750-00L b 60716-00L 13.K/14.6K Air Spring Bracket 60757-000 1K/1.5K 66 Rail 60976-000 1K/1.5K 300 Rail a 60738-001 13.K/14.6K 66 Rail b 60738-00 13.K/14.6K 300 Rail 3 64838-00L Shock Absorber 4 641-001 Upper Shock Bracket 60961-07 Front Leaf Spring Assembly Service Kit, One Side, Includes Key Nos. 5, 13 5 6477-000 Leaf Spring Assembly with Bushings Includes Key No. 6 6 **Steel Galvanized Liner 7 *Front Spring Hanger 8 64486-000 Inboard Spring Adapter, Replaces 6416-000 9 588-009 M0 x.5-6g 0 mm Hex Bolt LH Rear Shackle Bracket Service Kit, One Side Includes Key Nos. 10, 1-16 60961-683 66 Frame Rail 60961-684 300 Frame Rail RH Rear Shackle Bracket Service Kit, One Side Includes Key Nos. 11-16 60961-685 66 Frame Rail 60961-686 300 Frame Rail 10 LH Rear Shackle Bracket w/bushing 1 (Cast Part No. 64153-001) 64175-001 66 Frame Rail 64176-001 300 Frame Rail 11 RH Rear Shackle Bracket w/bushing 1 (Cast Part No. 64153-00) 64175-00 66 Frame Rail 64176-00 300 Frame Rail 60961-034 Shackle Bracket Service Kit, Axle Set, Includes Key Nos. 1-17 1 64159-000 Thrust Washer 4 13 64794-000 Shackle Plate 4 14 588-09 M0 x.5-6g 160 mm Hex Bolt, 6 Replaces 588-008 15 586-09 M0 Flat Washer, Replaces 586-009 1 16 589-003 M0 x.5-6h Locknut, Replaces 589-001 6 17 60631-000 Shackle Stop Spacer 6095-0XX STEERTEK Axle Assembly, Includes Key 1 Nos. 18-, 6-7, 9-30, 3-43. Contact Hendrickson Tech Services for Part Number 18 Axle & Kingpin Assembly, 70.9 KPI 1 1K/1.5K 64905-001 338/366 mm Ride Ht., 4. Drop 64905-003 338 mm Ride Ht., 5.36 Drop 13.K/14.6K 64905-005 338/366 mm Ride Ht., 4. Drop 64905-007 338 mm Ride Ht., 5.36 Drop 19 LH Lower Steering Knuckle Assembly 1 Includes Key Nos., 8 a 58900-007 <190 Ackermann STD Hub, Includes Key No. 31 a 58900-009 >190 Ackermann STD Hub, Includes Key No. 31 b 58900-017 <190 Ackermann Unitized Hub b 58900-019 >190 Ackermann Unitized Hub 0 RH Lower Steering Knuckle Assembly 1 Includes Key Nos., 8 58900-008 <190 Ackermann STD Hub, Includes Key No. 31 58900-010 >190 Ackermann STD Hub, Includes Key No. 31 Not Shown 58900-018 <190 Ackermann Unitized Hub Not Shown 58900-00 >190 Ackermann Unitized Hub 1 LH Upper Steering Knuckle Assembly 1 Includes Key Nos., 8 60903-011 338 mm Ride Ht. 60903-013 366 mm Ride Ht. 60904-00 RH Upper Steering Knuckle Assembly 1 Includes Key Nos., 8 60961-040 Kingpin Bushing and Bearing Service Kit, Axle Set, Includes Kit Nos. 60961-009 & 60961-039 60961-009 LH Kingpin Bushing w/composite Thrust Bearing Service Kit, Includes Key Nos. -6, 8-30 & Loctite 60961-039 RH Kingpin Bushing w/roller Thrust Bearing Service Kit, Includes Key Nos. -, 7-30 & Loctite 59156-000 Grease Cap Assembly 4 58937-000 Retaining Ring 4 58909-000 Kingpin Bushing 4 60961-043 Thrust Bearing Service Kit, Axle Set, Includes Kit Nos. 60961-041 & 60961-04 60961-041 LH Composite Thrust Bearing Service Kit, Includes Key Nos. 6, 8-30 & Loctite 60961-04 RH Roller Thrust Bearing Service Kit, Includes Key Nos. 7-30 & Loctite 6 5988-000 LH Composite Thrust Bearing 1 7 646-000 RH Roller Thrust Bearing 1 8 58910-001 Kingpin Seal, Replaces 58910-000 4 9 606-001 5 8" Socket Head Cap Screw 4 30 Kingpin Shim (As required) 609-001 0.005" Thickness 4 609-00 0.047" Thickness 1 Not Shown 60937-000 Loctite (Red) Compound Tube 1 31 646-000 ABS Sensor Sleeve 3 Tie Rod Assembly, Includes Key Nos. 33-35 1 See Selection Guide on page 8 33 ** 7 8" Castle Nut ***Tie Rod End Service Kit, Axle Set, Includes LH and RH Tie Rod End Service Kits See Selection Guide on page 8 ***LH Tie Rod End Service Kit, Includes Key Nos. 34, 36-37, See Selection Guide on page 8 ***RH Tie Rod End Service Kit, Includes Key Nos. 35-37, See Selection Guide on page 8 34 ***LH Tie Rod End, See Selection Guide 1 on page 8 35 ***RH Tie Rod End, See Selection Guide 1 on page 8 36 96-007 7 8" Flat Washer 37 17800-004 Tie Rod Nut Cotter Pin 38 608-001 ½"-13 UNC Square Head Bolt 39 600-000 ½"-13 UNC Hex Jam Nut 40 5995-017 Top Axle Wrap 41 647-003 Bottom Axle Wrap U-bolt Clamp Group Service Kit, One Side, Includes Key Nos. 4-46 60961-185 1K/1.5K and 13.K/14.6K 366 mm Ride Height, 4. Drop 338 mm Ride Height, 5.36 Drop 60961-186 1K/1.5K, 338 mm Ride Ht., 4. Drop 60961-187 13.K/14.6K, 338 mm Ride Ht., 4. Drop 60961-015 Top/Bottom Axle Wrap Liner Service Kit, One Side, Includes Key Nos. 4-43 4 60508-000 Top Axle Wrap Liner 43 59845-000S Bottom Axle Wrap Liner 44 M0 x.5-6g U-bolt 4 Vehicles built with Pre'07 Engine, see page 7 65663-00 1K/1.5K and 13.K/14.6K 366 mm Ride Ht., Bolt Length 75 mm 65663-003 1K/1.5K 338 mm Ride Ht., Bolt Length mm 65663-004 13.K/14.6K 338 mm Ride Ht., Bolt Length 5 mm 45 586-009 M0 Flat Washer 8 SP-180 5 See Notes on Page 6

KEY NO. PART NO. DESCRIPTION NO.REQ. KEY NO. PART NO. DESCRIPTION NO.REQ. 46 6507-001 M0 x.5-6h Locknut 8 47 LH Top Pad 1 Vehicles built with Pre'07 Engine, see page 7 6766-001 66 Frame Rail, Replaces 64517-001, 6417-001L, 647-001L, 65493-001L 67300-001 300 Frame Rail, Replaces 64173-001L, 6477-001L, 65605-001L 48 RH Top Pad 1 Vehicles built with Pre'07 Engine, see page 7 6766-00 66 Frame Rail, Replaces 64517-00, 6417-00L, 647-00L, 65493-00L 67300-00 300 Frame Rail, Replaces 64161-00, 64173-00L, 6477-00L, 65605-00L 49 64080-000 Rubber Axle Stop 50 LH Dowel Pin 1 Vehicles equipped with dual HCVs, built after 03/05 57159-004 366 mm Ride Height, 66.8 mm Vehicles equipped with a single HCV built prior to 03/05 57159-007 338 mm Ride Height, 79.5 mm 57159-01 338 mm Ride Height, 85.9 mm 57159-009 366 mm Ride Height, 107. mm 57159-013 366 mm Ride Height, 115 mm 51 RH Dowel Pin 1 Vehicles equipped with dual HCVs built after 03/05 57159-004 366 mm Ride Height, 66.8 mm Vehicles equipped with a single HCV built prior to 03/05 57159-004 338 mm Ride Height, 66.8 mm 57159-008 366 mm Ride Height, 94.8 mm 5 LH Front Axle Spacer 1 Vehicles equipped with dual HCVs built after 03/05 64318-08 366 mm Ride Height, 8 mm Vehicles equipped with a single HCV built prior to 03/05 64318-01 338 mm Ride Height, 1 mm 64318-00 338 mm Ride Height, 0 mm 64318-040 366 mm Ride Height, 40 mm 64318-048 366 mm Ride Height, 48 mm 53 RH Front Axle Spacer 1 Vehicles equipped with dual HCVs built after 03/05 64318-08 366 mm Ride Height, 8 mm 54 64166-000 Air Spring Adapter for Top Pad 13.K/14.6K Only Vehicles built with STEERTEK axle and Pre'07 Engine Top Pad with Straight Hex Bolt KEY NO. PART NO. DESCRIPTION NO. REQ. 1 5995-017 Top Axle Wrap 647-003 Bottom Axle Wrap Straight Bolt Clamp Group Service Kit, One Side, Includes Key Nos. 3-7 Vehicles equipped with dual HCVs, Built after 03/05 1K/1.5K and 13.K/14.6K 60961-035 338 mm Ride Ht. 60961-036 366 mm Ride Ht. Vehicles equipped with a single HCV, Built prior to 03/05 60961-035 1K/1.5K, 338 mm Ride Ht. 60961-036 1K/1.5K, 366 mm Ride Ht. 60961-037 13.K/14.6K, 338 mm Ride Ht. 60961-038 13.K/14.6K, 366 mm Ride Ht. 3 60508-000 Top Axle Wrap Liner 4 59845-000S Bottom Axle Wrap Liner 5 M0 x.5-6g Hex Bolt 8 Vehicles equipped with dual HCVs, Built after 03/05 1K/1.5K and 13.K/14.6K 588-007 338 mm Ride Ht., Bolt Length 0 mm 588-011 366 mm Ride Ht., Bolt Length 0 mm Vehicles equipped with a single HCV, Built prior to 03/05 1K/1.5K 588-009 338 mm Ride Ht., Bolt Length 0 mm 588-010 366 mm Ride Ht., Bolt Length 60 mm 13.K/14.6K 588-007 338 mm Ride Ht., Bolt Length 0 mm 588-011 366 mm Ride Ht., Bolt Length 0 mm 6 586-009 M0 Flat Washer 8 7 6507-001 M0 x.5-6h Locknut 8 8 Top Pad Assembly, (Pre '07 Engine Top Pads are obsolete. If top pad replacement is required, replace with current top pad and U-bolts, see Key Nos. 44,47,48) 9 64080-000 Rubber Axle Stop 6 SP-180

Vehicles built between 03/05 and 1/07 Dual Height Control Valves Vehicles built prior to 03/05 Single Height Control Valve KEY NO. PART NO. DESCRIPTION NO. REQ. HCV, Link Mount & Linkage Assembly, Includes Key Nos. 1-1 65601-006 LH 1K/1.5K, Replaces 65601-001 65601-007 RH 1K/1.5K, Replaces 65601-00 6560-006 LH 13.K/14.6K, Replaces 6560-001 6560-007 RH 13.K/14.6K, Replaces 6560-00 1 LH Height Control Valve Bracket 1 64480-005 1K/1.5K, Replaces 64480-000 64481-005 13.K/14.6K, Replaces 64481-000 RH Height Control Valve Bracket 1 64480-004 1K/1.5K, Replaces 64480-00 Not Shown 64481-004 13.K/14.6K, Replaces 64481-00 HCV & Linkage Assembly 5947-0 LH, Replaces 5947-010, 1 Includes Key Nos. 3-8, 10-1 5947-06 RH, Replaces 5947-01, 1 Includes Key Nos. 3-7, 9-1 3 5948-004 Height Control Valve Linkage 4 6498-000 M8 x 1.-6H Hex Nut 4 5 59169-00 M8 Link Stud 4 6 6497-000 M8 x 1.-6H Locknut 4 7 586-01 M8 Flat Washer 4 8 59935-017 LH HCV, Replaces 59935-006 1 9 59935-016 RH HCV, Replaces 59935-009 1 10 586-014 M6 Flat Washer, Replaces 96-08 4 11 17497-001 ¼" Lockwasher 4 1 66388-000 M6 x 1.0-6H Locknut, Replaces 6509-000 4 Single HCV, Link Mount & Linkage Assembly, 1 Includes Key Nos. 1-9 64089-000 1K/1.5K 64094-000 13.K/14.6K 1 Single Height Control Valve Bracket 1 64480-000 1K/1.5K 64481-000 13.K/14.6K 5947-006 Single Height Control Valve & Linkage 1 Assembly, Includes Key Nos. -9 5948-004 Height Control Valve Linkage 1 3 6498-000 M8 x 1.-6H Hexnut 4 59169-00 M8 Link Stud 5 6497-000 M8 x 1.-6H Locknut 6 586-01 M8 Flat Washer 7 59935-003 Height Control Valve 1 8 96-08 ¼" Flat Washer 9 49983-000 ¼" 0 UNC Locknut Obtain a Hendrickson Dual Height Control Valve Conversion Kit to convert a single height control valve to dual height control valves configuration. Dual Height Control Valve and Linkage Kit 60961-101 1K/1.5K Capacity 60961-10 13.K/14.6K Capacity Vehicles built between 03/05 and 06/07 equipped with dual height control valves Air Spring with Support Plate Service Kit No. 60961-18 (1.5K) 1 Vehicles built between 03/05 and 06/07, equipped with dual HCVs must use Air Spring with Support Plate Service Kit No. 60961-18 KEY NO. PART NO. DESCRIPTION QTY. 1 67304-00 Air Spring (1.5K) 1 67149-000 Support Plate 1 SP-180 7

Tie Rod Selection Guide, ***Straight Tie Rods 1K / 1.5K 1 1 8" THREADS AXLE MODEL ACKERMANN Vehicles built AFTER January 014 STEERTEK NXT TIE ROD ASSEMBLY PART NO. >190 76877-00 <190 76877-005 ***Vehicles built PRIOR TO January 014 STEERTEK NXT STEERTEK TIE ROD END PART NO. 70995-001 (LH) 70995-00 (RH) TIE ROD END SERVICE KIT NO. 60961-734 (Axle Set) 60961-736 (LH) 60961-741 (RH) TIE ROD ASSEMBLY REPLACEMENT PART NUMBER >190 609-00 *** Tie rod end kits are no longer available for these assembly 76877-00 <190 609-005 numbers, requires complete tie rod assembly replacement. 76877-005 13.K / 14.6K 1¼" THREADS Vehicles built AFTER January 014 STEERTEK NXT >190 76879-001 <190 76879-00 Vehicles built up to January 015 STEERTEK NXT & STEERTEK >190 64006-001 <190 64006-00 76876-001 (LH) 76876-00 (RH) 6400-001 (LH) 6400-00 (RH) 60961-735 (Axle Set) 60961-74 (LH) 60961-743 (RH) 60961-011 (Axle Set) 60961-07 (LH) 60961-08 (RH) NOTE: * Not supplied by Hendrickson, used for reference only. Refer to OEM (vehicle manufacturer) for more information. Hendrickson is not responsible for components supplied by vehicle manufacturer. For assistance with maintenance and rebuild instructions on these components see vehicle manufacturer. ** Item included in assembly only, part not sold separately. *** Hendrickson supplies different tie rod assemblies. Locate the tie rod assembly part number on the tie rod tube to help determine what tie rod end kit or complete tie rod assembly replacement to use for service as shown in the Tie Rod Selection Guide table. Hendrickson AIRTEK Ride Height Gauges for Volvo Vehicles can be obtained on-line at www.hendrickson-intl.com/litform Height Gauge (After July 011) 1K/1.5K/13.K/14.6K Capacity Literature. No. 45745-359 Height Gauges (Prior to July 011) 1K/1.5K Capacity Literature No. 45745-170 and 13.K/14.6K Capacity Height Gauge Literature No. 45745-195 This is a general parts list to provide directional information. Components may vary by model. Questions in regards to parts, contact Hendrickson Truck Parts at 1.866.755.5968 (Toll-free U.S. and Canada), 630.910.800 (Outside U.S. and Canada) or e-mail: truckparts@hendrickson-intl.com. www.hendrickson-intl.com Truck Commercial Vehicle Systems 1.866.755.5968 (Toll-free U.S. and Canada) 800 South Frontage Road 630.910.800 (Outside U.S. and Canada) Woodridge, IL 60517-4904 USA Fax 630.910.899 Information contained in this literature was accurate at the time of publication. Product changes may have been made after the copyright date that are not reflected. SP-180 Rev G 03-15 005 015 Hendrickson USA, L.L.C. All Rights Reserved Printed in United States of America