Submersible Motor and Pump ore Holes Submersible Pumps WPR-SP Series
Submersible Motor and Pump 4PD - 4 Submersible Oil Filled Motors TECHNICL CHRCTERISTICS 4 submersible oil filled motors Motor sleeve made of stainless steel ISI 16 Shaft made of DUPLEX stainless steel High quality mechanical seal PERFORMNCE RNGE Powers from.7 to 7.5 kw PPLICTION LIMITS Maximum liquid temperature +5 C 1 m immersion limit Starts/hour: 2 at regular intervals Minimum flow rate for motor cooling 8 cm/s Continuous service S1 ELECTRIC MOTOR 2 pole electric motor, 5 Hz (n ~ 29 1/min) Voltage: single-phase 2 V up to 2.2 kw three-phase 4 V Insulation: F class Protection: IP 68 CONSTRUCTION ND SFETY STNDRDS Rewindable submersible oil filled motor (oil type vegetable). Flange coupling dimensions in compliance with NEM standards. Complete with power cable of the following length: 1.7 m for powers from.7 to kw 2.7 m for powers from 4 to 7.5 kw. Single-phase versions come with a capacitor included in the packaging. EN 64-1 IEC 64-1 CEI 2- CERTIFICTIONS COMPNY WITH MNGEMENT SYSTEM CERTIFIED Y DNV ISO 91: QULITY ISO 141: ENVIRONMENT ND SFETY 1
Submersible Motor and Pump PERFORMNCE DT Single-phase versions MODEL Rated power xial Revs Starting Power Capacitor load current factor (VL=45V) h Weight Rated P2 current 2 V / 5 Hz kw HP N 1/min cos F mm kg 4PDm /.5.7.5 28..86 2 11 6.5 4PDm /.75.55.75 281.5.89 1 7.2 4PDm / 1.75 1 28.2.91 5 56 8.5 2 4PDm / 1.5 1.1 1.5 284.2.9 4 86 1.2 4PDm / 2 1.5 2 2845..9 6 46 11.7 4PDm / 2.2 282.1.94 75 481 15. 8 Three-phase versions MODEL Rated power xial load P2 Revs Starting current Rated current Power factor 4 V / 5 Hz kw HP N 1/min cos mm kg 4PD /.5.7.5 h Weight 2855.2.52 11 6.5 4PD /.75.55.75 285 4.6 1 7.2 4PD / 1.75 1 28.8.71 56 8.5 2 4PD / 1.5 1.1 1.5 28 4.6.79 71 9.4 4PD / 2 1.5 2 285.8.66 86 1.2 4PD / 2.2 281 6.5.7 46 11.7 4PD / 4 4 284 5.6.79 55 15. 4PD / 5.5 4 5.5 285 5.4.77 61 2.1 4PD / 7.5 5.5 7.5 5 28 5.5.87 7 24.7 4PD / 1 7.5 1 284 5.4.76 8 29. Ø 94 h SSORIMENTI SORPTION MODEL Single-phase 4PDm /.5 4PDm /.75 4PDm / 1 4PDm / 1.5 4PDm / 2 4PDm / VOLTGE(single-phase) 2 V.6 4.7 5.9 8. 1.7 15.2 MODEL VOLTGE (three-phase) Three-phase 2 V 4 V 24 V 415 V 4PD /.5.1 1.8. 1.7 4PD /.75.5 2.. 1.9 4PD / 1 4. 2.5 4.2 2.4 4PD / 1.5 5.8.4 5.6.2 4PD / 2 8. 4.8 8. 4.6 4PD / 1.6 6.1 1.2 5.9 4PD / 4 12. 7.1 11.8 6.8 4PD / 5.5 15.9 9.2 15.2 8.8 4PD / 7.5 2.2 11.7 19.4 11.2 4PD / 1 28.4 16.4 27.2 15.8 2
4 Submersible Pumps WPR-SP 4 range of submersible pumps are made of corrosion and abrasion resistant stainless steel and have been developed in accordance with state-of-the-art technology. The WPR-SP 4 pumps are manufactured to the highest standards for energy efficiency, dependable performance, rugged construction, and long service life. Capacity (m /h) min. max 18 Total Head : Max. 285 m. pplications Portable water supply from deep wells gricultural-irrigation, livestock watering, etc. Municipal and industrial Pressure boosting Fountains, etc. Pumped Liquids Clean, non-corrosive and non-abrasive liquids. Operating Condition o Max. ambient temperature (Liquid) : C Sand content : Max. 5 g/m Features Stainless steel construction designed and built for years of trouble free operation ll metal parts are made of 4 stainless steel, except for the shaft, which is made of 41 stainless steel Heavy duty stainless steel discharge head with built-in check valve for long life and ease of installation Smooth safety hook Mounting specifications are according to NEM standards High quality shaft bearings providing low friction and high wear resistance Heavy duty stainless steel impellers & diffusers ensuring optimal performance Stainless steel strainer to restrict the entry of sand and other extraneous material
Coding System e.g. WPR-SP 95-5 m XXXX XX-XX X Type range WPR-SP : ore Holes Submersible pumps Rated flow rate (m /h) Number of stages Single-phase motor - Single-phase motor (22 V) (with coding m ) Three-phase motor (8 V) (without coding m ) 4
WPR-SP range are submersible bore holes or deep well pumps and submersible up t a depth of m. Fully constructed in stainless steel material to withstand corrosions and erosions. Light weight, strong and robust, the pumps is able to deliver the performance required in a difficult condition and site situation. Flange: RP / NPT treaded - Female Materials: SS4 or SS 16 Mounting: - Horizontal or Vertical position DN 1-mm (4-12 ) Q. - 12 m /hr - 5 Hz 1-165 m /hr - 6 Hz O.P. 5bar H up to 55m Ns up to,6rpm o t up to C pplications: Portable water supply from deep well / ore Holes gricultural-irrigations in domestic and live stock Reverse osmosis - RO Dewatering for Mines Municipal supply and distribution pressure booster Land scaping - Fountains and Golf course irrigations. 5
General Data Material Specification-4 Pumps Component Discharge Diffuser Impeller Split Cone Split Cone Nut Stop Ring Materials Carbon/ Graphite/PTFE Standard 4 4 4 4 4 Neck Ring Retainer Strainer Suction Interconnector Pump Shaft Coupling Strap Cable Guard Neck Ring Nut earing SUS4+NR NR 4 4 4 41 4 4 4 4 9 Motor racket 4 1 18 12 4 Discharge Impeller Diffuser Pump Shaft 9 4 87 9 Strainer Neck Ring Motor racket 6
Performance Curva WPR-SP- U.S.GPM 5 1 15 2 H[m] H[ft] WPR-SP- 5HZ 11 1 9 8 2 7 6 15 1 5 22 18 12 9 6 5 4 2 1 1 2 4 5 6 7 Q[l/min] 8 n(%) 6.6 1.2 1.8 2.4..6 4.2 Q[m /h] 8 (%) 6 4 % 4 2 2 1 2 4 5 6 7 Q[l/min].6 1.2 1.8 2.4..6 4.2 Q[m /h] 7
WPR-SP- Selection Chart Q=DELIVERY Single-phase Three-phase WPR-SP-6m WPR-SP-9m WPR-SP-12m WPR-SP-18m WPR-SP-22m WPR-SP-22 WPR-SP-m WPR-SP- WPR-SP- STGES 6 9 12 18 22 kw.7.55.75 1.1 1.5 1.5 2.2 HP.5.75 1. 1.5 2. 2.. l/min 5 1 15 2 5 4 45 5 6 7 8 9 1 12 m /h..6.9 1.2 1.5 1.8 2.1 2.4 2.7..6 4.2 4.8 5.4 6. 7.2 H=TOTL HED IN METER 8 57 77 14 16 211 49 2 47 1 46 44 28 41 66 64 62 58 56 116 11 97 94 9 85 26 8 52 8 22 4 67 127 12 115 11 15 97 8 19 14 128 124 117 11 9 14 19 28 45 54 6 18 177 172 164 155 145 118 8 Selection Chart 1Phase Single-phase WPR-SP-6m WPR-SP-9m WPR-SP-12m WPR-SP-18m WPR-SP-22m WPR-SP-m 29 56 419 545 629 692 Dimensions(mm) RP/NPT 1 1/4 C D E 49 642 69 7 94 81 424 969 474 11 474 1166 Weight(Kg) 8.9 1.2 12.1 14.9 17.2 17.8 C Selection Chart Phase E Three-phase WPR-SP-22 WPR-SP- WPR-SP- 629 692 88 Dimensions(mm) RP/NPT 1 1/4 C D E 424 15 424 1116 474 157 Weight(Kg) 15.7 16. 21.4 D 8
Performance Curva WPR-SP-5 H[m] U.S.GPM 1 2 H[ft] 44 WPR-SP-5 5 HZ 9 8 7 2 6 15 5 21 4 1 17 12 5 8 2 1 2 4 6 8 1 12 Q[l/min] 8 n (%) 6 4 2 % 8 (%) 6 4 2 2 4 6 8 1 12 Q[l/min].6 1.2 1.8 2.4..6 4.2 4.8 5.4 6. 6.6 7.2 Q[m /h] 9
WPR-SP-5 Selection Chart Q=DELIVERY Single-phase Three-phase WPR-SP-58m WPR-SP-512m WPR-SP-517m WPR-SP-517 WPR-SP-521m WPR-SP-521 WPR-SP-5m WPR-SP-5 WPR-SP-5 WPR-SP-544 STGES 8 12 17 21 44 kw.75 1.1 1.5 2.2 2.2. 4. HP 1. 1.5 2... 4. 5.5 l/min 15 2 5 4 45 5 6 7 8 9 1 12 14 16 m /h 52 77 18 14 157 29 279.9 1.2 1.5 1.8 2.1 2.4 2.7..6 4.2 4.8 5.4 6. 7.2 H=TOTL HED IN METER 45 68 96 44 67 94 4 66 9 42 64 9 41 6 88 9 6 84 6 56 77 5 7 28 44 6 2 7 54 118 115 11 111 18 1 96 87 77 67 18 16 1 129 127 121 11 1 9 78 184 18 176 172 168 159 149 17 12 15 247 242 27 21 226 215 22 187 166 14 8.4 9.6 Selection Chart 1Phase Single-phase Dimensions(mm) C D E Weight(Kg) C WPR-SP-58m WPR-SP-512m WPR-SP-517m WPR-SP-521m WPR-SP-5m 5 419 524 68 692 RP/NPT 1 1/2 94 424 474 519 519 729 84 9 1127 1112 11. 1.8 16.2 2. 21. Selection Chart Phase E Three-phase WPR-SP-517 WPR-SP-521 WPR-SP-5 WPR-SP-5 WPR-SP-544 524 68 692 868 199 Dimensions(mm) RP/NPT 1 1/2 C D E 424 948 474 474 56 56 182 1166 1428 1747 Weight(Kg) 14.7 14.5 17.7 24.6 7.1 D 1
Performance Curva WPR-SP-8 H[M] 22 2 U.S.GPM 1 2 4 5 WPR-SP-8 5 HZ H[ft] 7 18 6 16 14 5 12 21 4 1 8 6 18 15 12 1 2 4 2 7 5 1 5 1 8 n(%) 6 (%) 15 2 Q[l/min] 8 (%) 6 4 4 2 2 5 1 15 2 Q[l/min] 6 9 12 Q[m /h] 11
Selection Chart Q=DELIVERY Single-phase Three-phase WPR-SP-85m WPR-SP-87m WPR-SP-81m WPR-SP-81 WPR-SP-812m WPR-SP-812 WPR-SP-815m WPR-SP-815 WPR-SP-818 WPR-SP-821 WPR-SP-8 STGES 5 7 1 12 15 18 21 kw.75 1.1 1.5 2.2 2.2. 4. 4. HP 1. 1.5 2... 4. 5.5 5.5 l/min 5 4 45 5 6 7 8 9 1 12 14 16 18 2 m /h 1.8 2.1 2.4 2.7..6 4.2 4.8 5.4 6. 7.2 H=TOTL HED IN METER 41 58 71 87 14 122 144 28 8 54 65 8 27 7 5 64 79 96 26 6 52 6 78 95 26 6 51 61 76 9 5 49 6 74 9 24 5 47 58 72 88 2 4 47 57 7 86 22 4 46 55 68 84 21 2 4 52 64 79 8.4 9.6 1.8 12 15 18 19 15 12 27 24 17 8 2 47 4 1 57 49 8 72 6 47 114 11 111 17 15 12 1 9 85 72 55 1 11 128 126 12 119 116 114 17 97 84 64 Selection Chart 1Phase Single-phase WPR-SP-85m WPR-SP-87m WPR-SP-81m WPR-SP-812m WPR-SP-815m 412 496 622 76 82 Dimensions(mm) RP/NPT 2 C D E 94 424 474 519 519 86 92 196 12 151 Weight(Kg) 12.8 15.5 18.5 22.8 24. C Selection Chart Phase Three-phase WPR-SP-81 WPR-SP-812 WPR-SP-815 WPR-SP-818 WPR-SP-821 WPR-SP-8 622 76 82 958 184 12 Dimensions(mm) RP/NPT 2 C D E 424 146 474 474 54 648 648 118 16 151 172 19 Weight(Kg) 17. 19.5 21..8 2.4 4.4 D E 12
Performance Curva WPR-SP-14 H[M] 16 U.S.GPM 2 4 6 8 WPR-SP-14 5 HZ H[ft] 5 14 12 18 4 1 1 8 1 6 2 7 4 5 1 2 8 n(%) 6 4 5 1 15 2 (%) Q[l/min] 8 (%) 6 4 2 2 5 1 15 2 Q[l/min] 6 9 12 15 18 Q[m /h] 1
Selection Chart Q=DELIVERY Single-phase Three-phase WPR-SP-145m WPR-SP-145 WPR-SP-147 WPR-SP-141 WPR-SP-141 WPR-SP-1418 WPR-SP-14 STGES 5 7 1 1 18 kw 1.5 2.2. 4. 5.5 7.5 HP 2.. 4. 5.5 7.5 1 l/min m /h 46 65 84 117 7 8 9 1 12 4.2 4.8 5.4 6. 7.2 2 44 62 8 111 1 4 6 78 18 14 16 18 2 2 4 6 8 8.4 9.6 1.8 12 15 18 19 2 22 2 H=TOTL HED IN METER 42 58 77 14 28 4 57 74 12 16 154 149 145 141 15 27 7 54 72 79 26 6 52 67 9 129 22 4 56 77 17 16 2 29 8 54 75 Selection Chart 1Phase Single-phase WPR-SP-145m 55 Dimensions(mm) RP/NPT 2 C D E 474 979 Weight(Kg) 16.7 C Selection Chart Phase Three-phase WPR-SP-145 WPR-SP-147 WPR-SP-141 WPR-SP-141 WPR-SP-1418 WPR-SP-14 55 65 8 1 15 185 Dimensions(mm) RP/NPT 2 C D E 424 929 474 54 648 78 88 119 17 167 288 264 Weight(Kg) 15.2 18. 2.2. 8.1 46.8 D E 14
www.alvapompa.com SC (lva Service Center) Telp. 21-622192 : POMP IR PEDROLLO 2/18