E245 Net flywheel power operating weight (MAx) 118 kw - 160 hp 24 420 kg BUCKET CAPACITY 0.52-1.31 m 3 PROVEN PERFORMANCE
245 * Evolution in technology Evolution in productivity and consumption Evolution in comfort and safety Evolution in accessibility and service Evolution in equipment and versatility Evolution in reliability 2500 mm 3420 mm 2 * A product of the global alliance between CNH and KOBELCO
3
245 Specifications TIER-2 EMISSIONED ENGINE Net flywheel power (ISO 14396)...118 kw/160 hp Rated rpm...2150 Make and model...cnh F4BE0684B* D402 Type...diesel, 4 strokes, direct injection, turbocharged and intercooler Displacement...5.9 l Number of cylinders...6 Bore x stroke...102 x 120 mm Maximum torque at 1400 rpm...660 Nm Remote engine oil filter for easy replacement Electronic engine rpm control DIAL TYPE Auto-Idling selector return engine to minimum rmp when all controls are in neutal position Start -15 outside temperature as standard equipment (-25 optional) The engine conforms to 97/68/CE STAGE 2 Standards ELECTRICAL SYSTEM Voltage...24 V Alternator...70 A Starter motor...4 kw Standard maintenance-free batteries...2 Capacity...100 Ah HYDRAULIC SYSTEM S.H.S (Smart Hydraulic System) for perfect controllability and simultaneity of all movements. New generation A.I. (Artificial Intelligence) on-board computer A.P.S. (Automatic Priority System) device Computerized pumps delivery and main control valve actuation in relation to manipulators stroke E.S.S.C. (Engine Speed Sensing Control) device for total installed hydraulic power exploitation. High definition E.T.U. (EASY TO USE) multifunction monitor incorporating: - Maintenance programme - Self Diagnosys System - Operating Data Storage (engine/rmp operating pressure etc...) Mechatronic Work Selector (M.W.S.): - Standard Mode (W) - Standard operating mode - Heavy/Mechatronic Mode (H/M) - Maximum hydraulic power for top productivity. In this mode, the unit learns the type of operation being completed after 2 cycles and automatically selects maximum efficiency/speed and operating precision with the A.P.S. (Automatic Priority System) device. - Attachments Mode (A) - Possibility of selecting and storing delivery for special tools from the operator compartment Continuos untimed insertion POWER BOOST DEVICE. Continuos insertion of device when selected ensures maximum digging performance and productivity in the toughest application. Standard double pumps flow device Piping pressure discharge push button: to facilitate tooling change over without piping oil leakage Hammer/Crusher two-directional system Main pumps: two variable delivery pumps with electronic delivery adjustment Pumps automatically revert to zero with controls in neutral. Maximum delivery...2 x 210 l/min Piloting circuit gear type pump Maximum delivery...22 l/min Maximum operating pressure: Equipment/swing/travel...34.3 MPa Power Boost...37.8 MPa Hydraulic cylinders......double effect - Lift (2) - Bore x Stroke...125 x 1240 mm - Dipperstick (1) - Bore x Stroke...135 x 1490 mm - Bucket (1) - Bore x Stroke...120 x 1080 mm - Positioning (only triple articulation) - Bore x Stroke...150 x 1090 mm Indipendent hammer/positioning cylinder control TRANSMISSION Type...hydrostatic two-speed Motors...axial piston type, double displacement Brakes...oil bath disc type, automatically applied hydraulically released Final drives...oil bath planetary reduction Gradeability (continuos)...70% (35 ) continuous Travel speeds: low... from 0 to 3.1 km/h high...from 0 to 5.0 km/h Automatic DownShift device: to move travel motors to maximum displacement position with selector on high speed position when greater traction is required SWING Swing motor...axial piston type Swing brake...oil bath disc type, automatically appliedand hydraulically released Final drive...oil bath planetary reduction Swing ring...grease bath type Swing speed...12.7 rpm CAB AND CONTROLS Transparent cab roof. Standard automatic conditioning Controls...piloted Two cross path manipulators actuate all equipment movements and upperstructure swing Two pedals with hand levers control all track movements, counter-rotation included. A safety lever completely netrualises the piloting circuit. UNDERCARRIAGE X-frame undercarriage design Reinforced track chain with sealed bushing E245 Track rollers (each side) 8 Carrier rollers (each side) 2 Length of track on ground (mms) 3420 Gauge (mms) 2000 Shoes (mm) 550* - 700-800* (* asymmetric type) CAPACITIES Engine litres Lube oil...17 Coolant...24 Fuel tank...292 Hydraulic system...270 4
Standard EQUIPMENT Anti-leakage main spool hydraulic control valve Auto-Idling Cell phone holder with charge socket Centralised boom lubrication Cyclone prefilter Double pumps flow device Two travel speed with Automatic Down Shift device Engine rpm electronic control Electrical fuel pump Grease bath slewing ring Hammer/Crusher system predispotition Hydraulically suspended cab with transparent opening roof and automatic air conditioning system HD sealed chains Front seals hydraulic piping and conmnections Hydraulic travel end cylinders Horn Maintenance-free batteries Mechanically suspended heated seat (M.W.S.) Mechatronic Work Selector Monobloc boom or triple articulation E.T.U. (Easy To Use) multi-function electronic monitor Foot pedal or lever travel control Hammer piping on booms Power Boost Radio set Shoes: 550 mm S.H.S. (Smart Hydraulic System) Swing and travel motors with automatic disc type brakes Two-speed intermittent windshield wiper TIER 2 emissioned diesel engine Tool kit Optional EQUIPMENT 2080 mm Dipperstick 2400 mm Dipperstick 2940 mm Dipperstick 3500 mm Dipperstick Antidrop valves on Dipperstick cylinder Antidrop valves on boom lift cylinders Air suspeded heated seat Supplementary hydraulic funtion predispositions Multipurpose, rock and heavy duty with bucket/boom adjustment shims Load handling Kit Hydraulic quick coupler predisposition Mechanical quick coupler Northern countries kit Supplementary lights on cab Shoes: 700 mm - 800 mm Piping on booms for supplementary low delivery functions Note: standard and optional equipment may vary by country. Consult your NEW HOLLAND dealer for specific. BUCKETS SAE CAPACITY CECE HEAPED CAPACITY WIDTH WEIGHT 0.52 m 3 0.45 m 3 750 mm 503 kg 0.62 m 3 0.53 m 3 850 mm 537 kg 0.78 m 3 0.66 m 3 1000 mm 634 kg 1.00 m 3 0.83 m 3 1200 mm 651 kg 1.10 m 3 0.91 m 3 1300 mm 698 kg 1.31 m 3 1.09 m 3 1500 mm 766 kg 5
245 MONOBLOC boom DIMENSIONS (mm) - OPERATING WEIGHT D E G F H C I A B M L N A B C D E F G H I L (1) 9550 (1) 3060 E245 3420 4281 1168 2750 (2) 9490 (2) 3010 2490 3076 1154 507 (3) 9400 (3) 2840 (4) 9480 (4) 3120 Dipperstick: (1) 2080 mm - (2) 2400 mm - (3) 2910 - (4) 3500 mm M - Shoe width N - maximum width Operating weight Specific ground pressure (*) asymmetric type mm mm kg bar E245 550(*) 700 800(*) 2500 2700 2700 23100 23620 24140 0.63 0.50 0.45 DIGGING PERFORMANCE 0 1 2 3 4 5 6 7 8 9 10 11 12 10 m E D C 9 8 7 6 5 4 3 2 1 DIPPERSTICK mm 2080 2400 2910 3500 A 9133 9445 9926 10320 A 8952 9270 9765 10165 B 5715 6035 6575 7135 B 5486 5832 6399 6956 C 9341 9556 9776 9685 D 6594 6767 7014 7041 E 3630 3555 3625 3553 BREAKOUT FORCE: Bucket dan 14600 14600 14600 14600 Dipperstick dan 14300 12400 10300 8500 A A B B 0 1 2 3 WITH POWER BOOST ON Bucket dan 16000 16000 16000 16000 Dipperstick dan 15650 13500 11200 9300 4 2440 mm 5 6 m 0 1 2 3 4 5 6 7 8 9 10 11 12 7 6
TRIPLE ARTICULATION DIMENSIONS (mm) - OPERATING WEIGHT D E G F H C I L A B M N A B C D E F G H I L (1) 9580 (1) 3150 E245 3420 4281 1168 2750 (2) 9520 (2) 3140 2490 3076 1154 507 (3) 9490 (3) 3060 (4) 9510 (4) 3290 Dipperstick: (1) 2080 mm - (2) 2400 mm - (3) 2910 - (4) 3500 mm M - Shoe width N - maximum width Operating weight Specific ground pressure (*) asymmetric type mm mm kg bar E245 550(*) 700 800(*) 2500 2700 2700 23650 24170 24420 0.64 0.51 0.46 DIGGING PERFORMANCE 0 1 2 3 4 5 6 7 8 9 10 11 12 m E 11 10 9 8 7 6 C 5 4 D 3 2 1 A 0 A B 1 2 DIPPERSTICK mm 2080 2400 2910 3500 A 9210 9530 10030 10444 A 9033 9357 9866 10291 B 5348 5671 6198 6695 B 5229 5558 6093 6597 C 10645 10927 11341 11561 D 7718 8008 8417 8635 E 2649 2566 2361 2552 BREAKOUT FORCE: Bucket dan 14600 14600 14600 14600 Dipperstick dan 14300 12400 10300 8500 WITH POWER BOOST ON Bucket dan 16000 16000 16000 16000 Dipperstick dan 15650 13500 11200 9300 2440 mm B 3 4 5 m 0 1 2 3 4 5 6 7 8 9 10 11 6 7
245 LIFTING CAPACITY TRIPLE ARTICULATION - DIPPERSTICK 2080 mm +9.0 m 6.6 * 6.6 * 3.6 +7.5 m 5.9 * 5.9 * 5.1 * 5.1 * 5.7 +6.0 m 6.1 * 6.1 * 4.8 * 4.8 * 4.3 * 4.0 6.9 +4.5 m 10.9 * 10.9 * 7.0 * 7.0 * 5.1 * 4.8 4.1 * 3.4 4.0 * 3.3 7.6 +3.0 m 8.9 * 6.9 5.7 * 4.6 4.2 * 3.3 3.9 * 2.9 8.0 +1.5 m 10.7 * 6.4 6.4 * 4.3 4.5 * 3.2 4.0 * 2.8 8.0 0 10.3 * 6.1 7.1 * 4.2 4.7 * 3.1 4.3 * 2.9 7.8-1.5 m 11.9 * 10.9 9.2 * 6.1 6.8 4.1 5.0 3.2 7.3-3.5 m 6.6 * 6.3 5.0 4.2 4.7 3.9 6.4-4.5m MONOBLOC - DIPPERSTICK 2080 mm +9.0 m +7.5 m 5.4 * 5.4 * 5.6 +6.0 m 5.4 * 5.1 5.3 * 4.1 6.8 +4.5 m 6.9 * 6.9 * 5.8 * 4.9 5.4 * 3.4 5.3 * 3.4 7.5 +3.0 m 8.7 * 7.0 6.6 * 4.7 5.4 3.3 5.0 3.1 7.9 +1.5 m 10.2 * 6.6 7.4 * 4.4 5.3 3.2 4.9 2.9 8.0 0 10.8 * 6.3 7.3 4.3 5.2 3.1 4.4 3.0 7.7-1.5 m 13.7 * 11.8 10.6 * 6.3 7.2 4.2 5.6 3.3 7.2-3.5 m 13.3 * 11.8 9.6 * 6.3 7.0 * 4.2 6.5 * 4.1 6.3-4.5 m 10.0 * 10.0 * 7.1 * 6.7 6.6 * 6.3 4.8 +9.0 m 4.7 * 4.7 * 4.3 +7.5 m 5.6 * 5.6 * 4.6 * 4.6 * 3.9 * 3.9 * 6.2 +6.0 m 5.8 * 5.8 * 4.6 * 4.6 3.7 * 3.6 7.3 +4.5 m 9.7 * 9.7 * 6.6 * 6.6 * 5.5 * 4.9 3.8 * 3.4 3.6 * 3.0 8.0 +3.0 m 8.3 * 7.1 5.4 * 4.6 4.0 * 3.3 3.6 * 2.7 8.3 +1.5 m 10.6 * 6.5 6.2 * 4.4 4.3 * 3.1 3.6 * 2.6 8.4 0 7.7 * 7.7 * 10.5 * 6.2 7.0 * 4.2 4.6 * 3.0 3.9 * 2.7 8.2-1.5 m 12.1 * 11.3 9.6 * 6.2 7.1 * 4.1 4.7 * 3.0 4.5 * 2.9 7.7-3.5 m 7.4 * 6.3 5.4 * 4.2 4.2 * 3.5 6.8-4.5 m MONOBLOC - DIPPERSTICK 2400 mm RADIUS OF LOAD VALUES ARE EXPRESSED IN TONNES 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. REACH FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE TRIPLE ARTICULATION - DIPPERSTICK 2400 mm REACH m +9.0 m +7.5 m 4.3 * 4.3 * 4.1 * 4.1 * 6.1 +6.0 m 4.9 * 4.9 * 3.9 * 3.7 7.2 +4.5 m 5.5 * 4.9 5.1 * 3.4 3.9 * 3.1 7.8 +3.0 m 13.4 * 13.0 8.2 * 7.1 6.4 * 4.7 5.4 3.3 4.1 * 2.8 8.2 +1.5 m 8.9 * 6.7 7.2 * 4.5 5.3 3.2 4.5 * 2.7 8.3 0 7.9 * 7.9 * 10.8 * 6.4 7.3 4.3 5.2 3.1 4.7 2.8 8.1-1.5 m 12.5 * 11.8 10.8 * 6.3 7.2 4.2 5.2 3.1 5.1 3.1 7.6-3.5 m 14.2 * 12.0 10.0 * 6.4 7.3 4.3 6.2 3.7 6.8-4.5 m 11.1 * 11.0 * 7.9 * 6.6 6.4 * 5.3 5.4 8 As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lifting capacity or 75% of static tipping load. Value marked with an asterisc are limited by the hydraulic system.
LIFTING CAPACITY TRIPLE ARTICULATION - DIPPERSTICK 2940 mm MONOBLOC - DIPPERSTICK 2940 mm MONOBLOC - DIPPERSTICK 3500 mm RADIUS OF LOAD +9.0 m 4.4 * 4.4 * 3.1 * 3.1 * 5.2 +7.5 m 5.0 * 5.0 * 4.2 * 4.2 * 2.6 * 2.6 * 6.8 +6.0 m 5.3 * 5.3 * 4.3 * 4.3 * 3.5 * 3.5 2.5 * 2.5 * 7.9 +4.5 m 6.3 * 6.3 * 6.0 * 6.0 * 4.6 * 4.6 * 3.6 * 3.4 2.5 * 2.4 * 8.5 +3.0 m 13.9 * 13.3 7.5 * 7.2 5.1 * 4.7 3.8 * 3.3 2.5 * 2.5 8.8 +1.5 m 8.9 * 8.9 * 10.0 * 6.6 5.9 * 4.4 4.1 * 3.1 2.7 * 2.4 8.9 0 8.5 * 8.5 * 10.7 * 6.2 6.7 * 4.2 4.4 * 3.0 3.0 * 2.4 8.7-1.5 m 11.3 * 11.3 9.9 * 6.1 7.2 4.1 4.6 * 3.0 3.7 * 2.6 8.3-3.5 m 10.9 * 10.7 * 8.3 * 6.2 6.2 * 4.1 4.2 * 3.0 7.5-4.5 m +9.0 m +7.5 m 2.8 * 2.8 * 6.7 +6.0 m 3.4 * 3.4 * 2.6 * 2.6 * 7.7 +4.5 m 4.9 * 4.9 4.7 * 3.4 2.6 * 2.6 * 8.4 +3.0 m 11.3 * 11.3 * 7.4 * 7.3 5.9 * 4.7 5.1 * 3.3 2.8 * 2.6 8.8 +1.5 m 8.9 * 8.9 * 9.3 * 6.7 6.8 * 4.6 5.3 3.2 3.0 * 2.5 8.8 0 8.7 * 8.7 * 10.5 * 6.4 7.3 4.3 5.2 3.1 3.4 * 2.5 8.6-1.5 m 11.7 * 11.6 10.8 * 6.2 7.2 4.1 5.1 3.0 4.2 * 2.7 8.2-3.5 m 15.0 * 11.8 10.2 * 6.3 7.1 4.1 5.3 3.2 7.4-4.5 m 12.5 * 12.1 8.8 * 6.4 6.2 * 4.3 6.1 * 4.2 6.1 TRIPLE ARTICULATION - DIPPERSTICK 3500 mm VALUES ARE EXPRESSED IN TONNES 3.0 m 4.5 m 6.0 m 7.5 m AT MAX. REACH FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE REACH m +9.0 m 2.7 * 2.7 * 5.9 +7.5 m 3.9 * 3.9 * 2.4 * 2.4 * 7.3 +6.0 m 3.9 * 3.9 * 3.3 * 3.3 * 2.3 * 2.3 * 8.3 +4.5 m 5.2 * 5.3 * 4.2 * 4.2 * 3.4 * 3.4 * 2.3 * 2.3 * 8.9 +3.0 m 10.4 * 10.7 * 6.5 * 6.6 * 4.7 * 4.7 * 3.6 * 3.3 2.4 * 2.3 9.2 +1.5 m 15.4 * 11.9 8.8 * 6.7 5.4 * 4.4 3.9 * 3.1 2.6 * 2.2 9.3 0 10.0 * 10.0 * 10.5 * 6.2 6.3 * 4.1 4.2 * 3.0 3.0 * 2.2 9.1-1.5 m 11.5 * 11.0 * 10.2 * 6.0 7.0 * 4.0 4.5 * 2.9 3.4 * 2.3 8.7-3.5 m 12.4 * 11.3 9.0 * 6.1 6.6 * 4.0 4.5 * 2.9 4.1 2.7 7.9-4.5 m 6.5 * 6.2 4.7 * 4.1 3.9 * 3.0 6.5 +9.0 m +7.5 m 2.5 * 2.5 * 7.2 +6.0 m 3.6 * 3.5 2.4 * 2.4 * 8.2 +4.5 m 4.2 * 3.4 2.5 * 2.5 * 8.8 +3.0 m 6.5 * 6.5 * 5.3 * 4.7 4.7 * 3.3 2.6 * 2.4 9.1 +1.5 m 14.1 * 12.5 8.5 * 6.8 6.4 * 4.5 5.3 * 3.2 2.8 * 2.3 9.2 0 10.2 * 10.2 * 10.2 * 6.4 7.2 * 4.2 5.1 3.0 3.3 * 2.3 9.0-1.5 m 11.8 * 10.5 10.7 * 6.2 7.1 4.1 5.0 2.9 3.9 2.4 8.6-3.5 m 15.2 * 11.6 10.4 * 6.1 7.0 4.0 5.0 2.9 4.8 2.8 7.8-4.5 m 13.7 * 11.8 9.3 * 6.2 6.7 * 4.1 5.9 * 3.6 6.6 As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lifting capacity or 75% of static tipping load. Value marked with an asterisc are limited by the hydraulic system. 9
10 245
11
PARTS & SERVICE The New Holland dealer network is, in itself, the best guarantee of continued productivity for the machines it delivers to its customers. New Holland service technicians are fully equipped to resolve all maintenance and repair issues, with each and every service point providing the high standards they are obliged to observe under New Holland's stringent quality guidelines. The New Holland global parts network ensures fast, reliable, replacement parts for less downtime, increased productivity and, of course, profitable operation for its customers. AT YOUR OWN DEALERSHIP The information contained in this brochure is intended to be a general nature only. The NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. company may at any time and from time to time, for technical or other necessary reasons, modify any of the details or specifications of the product described in this brochure. Illustrations do not necessarily show products in standard conditions. The dimensions, weights and capacities shown herein, as well as any conversion data used, are approximate only and are subject to variations within normal manufactoring tecniques. Published by NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. - www.newholland.com Printed in Italy - LEADER Firenze - Cod. 73301461 - INB - Printed 02/05 A product of the global alliance between CNH and KOBELCO NEW HOLLAND IS A BRAND OF CNH. CNH: THE TOTAL SOLUTIONS CHOICE FOR YOUR SPECIFIC BUSINESS NEEDS.