maskin mekano
Reuse on site We live in a time when all kinds of materials need to be taken care of. The volumes of these masses are sometimes smaller. This has forever changed the game plan. The key to success is no longer size and huge capacity. ut created with readiness, and production and transport costs cut down to minimum. In this new environment the Lv 00 T is launched to make you profitable.
Easy to transport The Lv 00 T is designed for transplantation. The hook-lift chassis means that hauling is cheap, easy and fast. There is no need for loose straps, braces or pegs, everything is on board. The rubber tyres make movements on site smooth and simple. ecause of the low feeding height loading ramps are never required. Which also saves time and diesel. Versatile in many ways espite the handy size of the Lv 00 T the construction is very sturdy. The range of materials that can be handled verge from traditional landfill to crushed recycling masses. The powerful belt feeder (00 mm wide) has a feed-in-height that enables it to be fed with a compact loader, while the reject grid is wide enough for bigger buckets. Increase your competitiveness High capacity. Maximum flexibility. Low operating costs. est secondhand-value. Spare-parts in stock. Everything regarding the Lv 00 T is optimised to raise your profitability and to make you competitive on a market with increasing demands. ost effective every day Quick transports and set-ups are keys to profitability in production of smaller volumes. A third factor is the change of meshes, both time and purchase costs. The Lv 00 T contains several elaborate solutions which reduce the time needed for rigging new screen meshes, and it can be performed in about 5 minutes. The average price for a new set of meshes is only.000 SEK and most dimensions are stored in Jönköping for immediate supply.
Screen The STE -6 is a four bearing screen with a strong mm circular stroke and elevation, operating at 800 rpm. The aggressive stroke makes it ideal for top soil production as it prevents plugging. It is almost horizontal for precise division of fine material and to prevent the masses from just slithering over the deck. Feeder The feeding unit consists of a heavy-duty hopper and a belt feeder. The powerful movement and low frequency handles wet and sticky material and recycling masses as well as crushed material. Loading can be performed with both an excavator and a wheel loader. The hopper can be equipped (option) with a heavy duty reject grid that tips slightly beyond 90º for effective removal of large stones. The reject grid is remote controlled via radio transmitter. The opening gap between the bars is 00 mm as standard (adjustable). Stockpiling The Lv 00 T is fitted with two hydraulically foldable on board stockpiling conveyors. Folding is performed without any twisting of belts and without any manual handling, which reduces set-up time. All drum motors are cambered and gummed. hassis The Lv 00 T is mounted on a sturdy hook-lift chassis. The strong construction of welded girders is designed to minimize vibrations during operation as well as for high towing stability and low weight. The plant can be fitted with rubber wheels in the rear, which makes towing on site easy. Motor The motor runs a dieselgenerator. A small hydraulic unit serves the conveyors and the radio remote controlled tipping grid. The motor has a fixed rpm of 500. The fuel tank has a volume of 00 l. Electrical drive The Lv 00 T is electrically driven, like all Maskin Mekano plants. Electrical drive provides low operating costs and reduces noise impact.
00 500 This drawing is protected by law. opies or transfer are illegal without acceptance of Maskin Mekano Försäljnings A. 500 700 This drawing is protected by law. opies or transfer are illegal without acceptance of Maskin Mekano Försäljnings A. 00 680 6800 800 800 00 A maskin mekano esigner nenasa rawn by View nenasa hecked Approved Rev. Generella toleranser ISO 768-m Article no. Mass (kg) 0 Title Lv 00 A 00 T Trsp Sverige ate 0-- File name Ritning A.dwg raw. no. Scale Sheet / A 800 A maskin mekano esigner nenasa rawn by View nenasa hecked Approved Rev. Generella toleranser ISO 768-m Article no. A Title Mass (kg) 0 Lv 00 T Trsp Sverige ate 0-- File name raw. no. Scale Sheet / A 0 600 00 600 d by law. opies or transfer are illegal without acceptance of Maskin Mekano Försäljnings A.
600 00 070 600 800 00 FAQ What brand is the diesel motor? It is a Yanmar, water cooled four cylinder motor driving a 5 kva generator. The rotation speed is 500 rpm, so it is both quiet and economic. How do you change the screening media? The meshes are end tensioned and fastened with bolts. It is possible to perform the swap as a single operator and after a few times it takes no more than 0 minutes. What is the price of a new set of meshes? A new set of meshes normally cost 500-000 SEK. What is the feed-in-height of the hopper? What kind of loader is suitable? The feed-in-height is.5 m and the reject grid is.0 m wide. A very suitable wheel loader is a Volvo L 5 but also bigger loaders as L70, L90 or similar, are suitable. What parts usually need to be replaced? The Lv 00 is a very robust plant featuring a lot of the same proven components as the larger Maskin Mekano plants. It is essential to refasten the screening media after a while to minimize the strain. If the filters and the oil of the motor are changed according to recommendations and the lubrication points are greased every 0th hour there is usually no need to replace any parts. How many lubrication points are there? an it be fitted with centralized lubrication? It is possible to fit the Lv 00 with centralized lubrication, but maskin mekano esigner rawn by View Article no. nenasa nenasa most customers chose not to since there are only Lv 00 lubrication T Trsp Sverige hecked Approved Rev. points that Generella are very toleranser accessible and only need to be greased every ISO 768-m 0th hour. To lubricate the bearings of the cylinders once every year is also recommended. What is the weight of the machine?.8 tones as standard, in Sweden it can be transported with a standard hook-lift bogie truck. What is the price of the machine? In the most common edition featuring the rear rubber wheels the price is.88.000 SEK. What is the fuel consumption? The Lv 00 has a fuel consumption of only l/h. How long is the set-up-time? Just fold the conveyors. It is ready for transport in - minutes and ready for production in the same time. What will the machine be worth in 6-7 years? The Maskin Mekano plants have a reputation for very good second hand value. In 6-7 years the Lv 00 should be worth about 500.000-700.000 SEK, depending more on condition than age. And the capacity? The Lv 00 is mostly used for sorting top soil and landfill but it is also suitable for a vast range of recycled material such as asphalt, concrete and so on. The capacity when producing top soil is 0-50 tones/h, depending on how moist the material is. Title Mass (kg) 0
Technical Specification Maskin Mekano Lv 00 T Transport Length Transport Width Transport Height Machine Weight 8.5 m.5 m. m approx..8 tonnes, depending on equipment Screenbox STE -6 Screening surface. x. m Single axle mechanically controlled with mm stroke incline Motor.0 kw, 00 V eltfeeder Fines conveyor Surplus conveyor Hydraulic equipment Electric equipment riving package Wheel- and towing device Width 00 mm Length.5 m Effect 5,5 kw Volume in hopper.5 m³ elt width 00 mm Length 7.9 m rummotor.0 kw Height under the drum drive.5 m elt width 800 mm Length 7.7 m rummotor.0 kw Height under the drum drive. m Hydraulic aggregate for folding of conveyors and tipping of reject grid Motor,5 kw istribution box with safety breaker, safety disconnection breaker, emergency stop, preregulator as well as extra motor socket ieselmotor Yanmar, 500 RPM. Generator 5 kva/50 Hz Mounted on a hook-lift chassis. Maskin Mekano A, ox 908, 550 09 Jönköping, SWEEN,+6 6 7 00, info@maskinmekano.se, www.maskinmekano.se