NabWork 1065 x 500 from Moen Marin is a well-equipped locality boat with excellent manoeuvrability

NabWork 1065 x 500 from Moen Marin is a well-equipped locality boat with excellent manoeuvrability

Description: This description, with relevant set-up drawings, is for a single-hull aquaculture boat set up to serve fish-farming facilities. General information: The boat is constructed in accordance with the DNV Nordic Boat Standard, and complies with the Norwegian Maritime Directorate s new regulations applicable from 1 January 2015 for this type of vessel. Main dimensions: Length o.a: 10,65 m Breadth o.a: 5.00 m Depth, moulded: 2,0 m Capacities: Fuel tanks: 2000 litres Speed, no payload: Approx. 12 knots with 25% filling with 100% MCR Other: Thwartship web frame c/c = 1000 mm Longitudinal stringers c/c = 300 mm Plate thickness: - Wheel house: 5 mm - Starboard side and deck: 7 mm - Port side: 6 mm - Hull: 6 mm High quality down to the last detail: - Fully insulated engine room for a better working environment - Closed internal side rails makes cleaning and disinfection easier - All-welded ribs for increased strength and rigidity - High-quality finishes both inside and out Crane: A Palfinger PK 8501 (M) A or B, Reach: 7,6 or 9,7 m type crane with radio control will be supplied. The crane will be supplied with marine upgrade. The crane is operated by a hydraulic system mounted on the engine. - Lifting capacity: 7.5 tm - Reach: 7.6 m - Rotation: 400 degrees

Profile SB Aft. Capstans: Two capstans will be fitted as standard equipment: - One 3-tonne on deck - One 1-tonne integrated in bulwark Both including emergency stop and foot pedal for operation. Navigation and communication: - Furuno Radar, echo sounder and chart plotter, with integrated GPS - Furuno VHF - Furuno Navpilot-711 autopilot Propulsion machinery: John Deere 6068 AFM75 M2, 198 kw @2400 rpm (265 HP) Generator: Nanni QLS13, 9,5 ekw Gear: Nogva Gear HC-168 Propeller: One Nogva N4-310 rotating four-bladed propeller Side propeller: One Sleipner SP 550 HYD bow propeller. Other: - Additional steering position behind the wheelhouse - 4-man life raft - Fire extinguishing equipment - WC Hydraulics: Powered by one PTO with 75 ccm Parker pump

Deck Profile PS

Below deck

Our products The versatile Moen NabWork singlehull multi-purpose service vessel, constructed from steel, is specifically designed for use in the aquaculture industry. It is also suitable for heavier duty tasks. The vessel has an impressive bollard pull and positioning capability. Other equipment consists of tried and tested high-quality products. Our Moen Aquaculture Platform has an impressive feed capacity of 700 tonnes in a silo, as well as a further 200 tonnes cargo capacity and a 100 tonnes silage capacity. It offers flexibility as regards the number of feed lines. The platform has generator operation. The platform also has a large deck area, a substantial storage area and a comfortable accommodation and service section. roksethdesign.no - mai 2017-200x Our NabCat 14.98 x10.00 m single- and twin-deck boats are popular service catamarans intended for use in the aquaculture and service industry. The vessels are wellequipped, with powerful propulsion machinery, Nogva gear and propeller systems, high-capacity crane, and a number of cabins. Our NabCat 13.50x7.50 m is our best-selling boat we have so far delivered more than 60 examples. The vessel is equipped with Scania propulsion machinery and Nogva gear and rotating propeller systems. This contributes to the vessel s excellent manoeuvrability. The boat is equipped with a 32 tm Palfinger crane, and is supplied with a mounting for a small deck winch. Under light ship displacement conditions, this catamaran can reach 15+ knots. The NabWork 10.65x5.00 m is a very popular alternative as a locality boat. It is equipped with powerful propulsion machinery, as well as gear and propeller systems and a generator from Nogva. It is also equipped with side propellers, which gives the boat its excellent manoeuvrability. The Sobit Feed Hatch System makes receiving feed easier and more secure. The system, which is tailormade for both new and existing feed floats, gives you complete control over the feed level in the silos at all times. Upgrading older feed hatches to new Sobit feed hatches can be done quickly and efficiently while maintaining full operation. Moen SkaMik is a rapidly emerging mechanical, gentle and environmentally friendly delousing method. It is chemical-free, so resistance is not a problem. High capacity. Close to 100% removal, collection and destruction of both attached and moving salmon lice. The technology is continually being developed further. Moen Tarpus delousing tarpaulins are made from high-quality materials and are available in various sizes. They primarily consist of certified cargo straps and a strong polyamide fabric. The fabric s breaking and tensile strengths are tested routinely. They are available in three versions: flat, conical and profile. Mekon ring washers are available in two versions: RV-1, intended for washing pens without a bottom ring, and RV-2, for washing pens with a bottom ring. They are self-supporting structures, and are intended for all pen models from Ø315 - Ø500 mm. Make a profitable investment Well-anchored in the maritime community Moen Marin AS is a company with solid traditions and a high level of expertise within ship-building with roots dating back to 1923. In addition to traditional production, our ambition is to constantly develop new concepts with a strong emphasis on innovation and user needs. Our focus areas are service vessels and work boats for the aquaculture industry, and we have also developed a new feed float concept in partnership with key players in the aquaculture sector. We are also responsible for the development, marketing and sale of many products related to an industry which is rapidly expanding and developing. Through our presence and international networks, we have forged strong working relationships with enterprises in China, Croatia, Estonia, Latvia and Poland. This strengthens our foundation and competitive edge. Our sister company Moen Marin Service AS has branches in Kolvereid and on Ottersøy near Rørvik. The Kolvereid branch has a slipway, a workshop and a workshop pier, giving it plenty of capacity for servicing, maintenance and repair tasks. Our dry dock (100 x 25 x 8.5m) on Ottersøy near Rørvik is situated close to the shipping channel midway along the Norwegian coast. A new and modern service building has recently been constructed next to the dock. For more information - contact our sales and marketing department: Georg Nesset (CMO) Mobile phone: +47 489 59 048 Ole Solbakken (Sales Manager) Mobile phone: +47 916 04 290 Per Christian Munkhaug (Sales) Mobile phone: +47 970 85 713 Moen Marin AS l Postal address: Postbox 1287 Sluppen, 7462 Trondheim, Norway l Visit: Havnegt. 9, Pirsenteret (entr. 1, 4th floor), Trondheim www.moenmarin.no