High Productivity 15" Vertical Turning Center M -2SP M-2SP ver. EN 171011 SU
Product Overview Basic Information Performance Detailed Information Options Applications Diagrams Specifications Customer Support M The new Series is a 15" size vertical turning center developed by Doosan with up-to-the-minute technologies. The column-integrated box guide and reinforced bed frame provides a stronger structure suitable for heavier-duty turning. The largest capacity of the class further enhances productivity and profitability.
Contents 02 Product Overview Basic Information 04 06 Performance Detailed Information 07 Standard / Optional Specifications 09 Applications 10 Diagrams 20 Machine / CNC Specifications 22 Customer Support -2SP M (ATC ) Further Enhanced Turning Capacity The largest turning capacity in its class is achieved with 24" max. chuck size and 830 mm (32.7 inch) of max. turning diameter. Highest Power and Machining Performance in its Class. The spindle motor provides 45 kw (60.3 Hp) and 2592 N.m (1912.9 ft lbs) of power and torque respectively, offering the best performance in its class. A variety of spindle specifications are available to suit customers diverse requirements. Improved Operational Efficiency, Including Chip Disposal and Operation Panel. The bed structure has been redesigned to facilitate the efficient disposal of high volumes of chips. In addition, the height of the operation panel can be adjusted for optimum convenience. Fixed type pendants are also available to suit customers requirements. 02 / 03
Product Overview Basic Information Performance Detailed Information Options Applications Diagrams Specifications The integral box guideway bed design provides vibrationfree performance and ensures heavy duty and high precision cutting over long term operation. The frame and structure are redesigned to accommodate the enhanced specifications. The rapid traverse is increased to 20 m/min (787.4 ipm) for higher productivity. Travel distance X-axis : 495(-80~415) mm (19.5(-3.1~16.3) inch) Z-axis : 780 mm (30.7 inch) Rapid traverse rate Z-axis Customer Support X/Z-axis : 20 m/min (787.4 inch) X-axis Machining Area Wider Machining Area The turning center now offers larger turning diameter and swing of workpiece. Wider machining area for larger / more diverse workpieces. Max. turning diameter Ø 830 mm Max. workpiece swing 850 mm (Ø32.7 inch) Max. turning height 750 mm (29.5 inch) (33.5 inch) Chuck size 15 inch {18 / 21 / 24} Ø710 (Ø28.0) Ø830 (Ø32.7) Unit: mm (inch) 270 (10.6) 750 (29.5)
Spindle Higher reliability and rigidity with improved base and and spindle motor assembly. Stronger Spindle The highly rigid gearbox structure provides the highest power / torque in its class for heavy duty cutting and optimum performance. A variety of spindle specifications are available to suit customers diverse requirements. Max. rotating speed 2000 r/min Max. power (30 min/cont.) 45/37 kw (60.3/49.6 Hp) 1 Max. torque 2592 N.m Diversified spindle specifications Description Unit Standard spindle Power (30min/cont.) kw (Hp) 37/30 (49.6/40.2) Max. torque N m (ft-lbs) 2592 (1912.9) Option 1 (Gear box) Power (30min/cont.) kw (Hp) 45/37 (60.3/49.6) Max. torque N m (ft-lbs) 2417 (1783.7) Option 2 Power (30min/cont.) kw (Hp) 30/22 (40.2/29.5) Max. torque N m (ft-lbs) 1345 (992.6) Spindle nose ASA A2-11 C-axis minimum rotation command angle (M type) deg 0.001 Turret The new servo turret facilitates faster indexing and accurate positioning. Fast and Accurate Turret The new servo motor turret increases indexing speed and accuracy. The M model uses BMT75P turret to provide excellent milling performance and reduced thermal error due to low heat generation design. No. of Tool Positions 12st Turret Indexing Time 0.25 sec. Rotary tool Max. speed 4000 r/min 2-axis Turret 3-axis BMT75P Turret Rotary tool max. power(15%/ cont.) 23/7.5 kw (30.8/10.1 inch) 04 / 05
Product Overview Automatic tool changer Description Unit Specifications Basic Information TOOL SHANK - CAPTO C6 Performance Detailed Information Capto tool of ATC provide the higher productivity at difficult to cut material MAGAZINE & ATC TOOL STORAGE CAPACITY ea 12 MAX. TOOL DIAMETER MAX. TOOL LENGTH MAX. TOOL MASS mm (inch) mm (inch) kg (lb) 90 (3.5) 375 (14.8) 10 (22.0) Options Applications Diagrams Specifications Tool Search Time (1 PORT) sec 0.5 NO. OF CAPTO Tool Holder ON TURRET ea 1~12 *Please contact DOOSAN to select detailed ATC specifications Customer Support Chip Disposal Improved Bed Structure for Easier Chip Disposal The improved chip disposal system offers improved maintainability for either manual operation or automated system. Greater slope angle for easier chip removal from working area and, Wider chip exit to handle high volume chips. 22 Turning Capacity O.D turning (Dia. Ø 446 mm (Ø17.6 inch)) speed (m/min (ipm)) 210 (8267.7) The 8300 Series offers the scope to cut large diameter workpieces and complete milling, drilling and tapping operations in a single setup. Feed (mm/rev (ipr)) 0.55 (0.0) Spindle speed (r/min) 965 depth (mm (inch)) 4.5 (0.2) I.D turning (Rough) speed (m/min (ipm)) 280 (11023.6) Feed (mm/rev (ipr)) 0.3 (0.0) depth (mm (inch)) 3.0 Tool length (length/dia) 3.5D * The above data is based on the test machining results for SM45C material in accordance with Doosan's own standard, and is subject to change without prior notice. I.D turning (End) speed (m/min (ipm)) 200 (7874.0) Feed (mm/rev (ipr)) 0.1 (0.0) depth (mm (inch)) 0.4 Tool length (length/dia) 4.0D 37/30 kw spindle motor
Standard/Option Specifications Various optional features are available to suit customers diverse applications. Standard Optional X Not applicable NO. Description Features 1 380 MM (15 INCH) 2 450 MM (18 INCH) 3 530 MM (21 INCH) Chuck 4 610 MM (24 INCH) 5 Chuck Adapter Only_15,18,21,24 inch 6 NONE 7 8 ST 8 10 ST Turret 9 12 ST 10 9 ST + 1 STRADDLE TOOL 11 RIGHT SIDE Coolant pump direction 12 REAR SIDE 13 0.4 KW_0.15 MPA_40 L/MIN 14 1.1 KW_0.45 MPA_30 L/MIN 15 1.8 KW_0.7 MPA_30 L/MIN Coolant pump 16 2.5 KW_1.0 MPA_30 L/MIN 17 4.0 KW_1.45 MPA_30 L/MIN 18 4.0 KW_2.0 MPA_20 L/MIN 19 High coolant interface 20 Oil Skimmer(Belt type) 21 Coolant options Coolant chiller(circulation type) 22 Coolant pressure switch 23 Coolant level switch 24 DUAL PRESSURE CHUCKING Chucking option 25 CHUCK CLAMP CONFIRMATION 26 Work location Air limit sensor preperation_festo 27 confirmation Air limit sensor preperation_taco 28 Workpiece measurement RLP40_Renishaw 29 Soft jaw 30 Jaw Hard jaw 31 HARDENED & GROUND HARD JAWS 32 Hinged belt Side chip conveyor 33 Magnetic scrapper 34 Hinged belt Rear chip conveyor 35 Magnetic scrapper 36 Chip bucket 37 Air blower 38 Flushing Coolant 39 Chip processing options Air Gun 40 Coolant gun 41 Mist collector_1.5kw (2.0Hp) (L750) 42 Mist collector_2.2kw (3.0Hp) (L1250) 43 Auto door with safety edge 44 Automatic side door 45 Automatic configuration Work & Tool counter 46 OP panel position check (Pandent arm position check) 47 Automoatic Tool Changer 48 PMC I/O MODULE TYPE Robot Interface 49 PROFIBUS-DP TYPE 50 Tool load mononitoring system 51 Signal tower 52 Additional MPG 53 Straddle tool preparation Optional devices 54 Removable tool setter 55 Linear scale (X-axis) 56 Auto power off 57 Gravity axis drop prevention 58 Pendant arm OP Panel type 59 Base mount 06 / 07
Product Overview Peripheral Devices Diverse Options Basic Information Performance Chip Conveyor Detailed Information Options Applications Diagrams Specifications Customer Support Long Short Needle Sludge Chip conveyor type Material Carbon steel Cast iron Aluminium Long Short Needle Short Sludge Long Short Needle Hinged belt type X X X Scrapper type Drum filter type Normal X X X Magnetic X - - - Hinged type X X X Scrapper X X : Suitable, : Possible, X : Not suitable Coolant Tank C B Coolant tank 300 L (79.3 galon) A Unit A B C mm (inch) 1850 (72.8) 250 (9.8) 800 (31.5) Auto Side Door Automatic side door is available for easy layout of line automation. Straddle Tool Simultaneous dual side cutting for higher productivity. Detachable Tool setter The tool setter facilitates the setting of machining tools, and can be used to compensate for worn tools accurately. Information Display Easy recognize the current selected axis and tool number, so that, operator's mistake is prevent. Manual axis selection Tool No.
Doosan Fanuc i User-Friendly Operation Panel FANUC CNC has been optimized for DOOSAN's machine tools to maximize productivity. The new, vertical operation panel is ergonomically designed with convenient keypad and buttons as well as adjustable height and swivel. 10.4" color LCD standard Easy Guide i (EZ i) standard New Easy Operation Package (EOP) standard Hot keys Productivity Improvement Non-cutting times have been reduced, such as faster turret indexing time, increased axis rapid speed and acc/dec rates, which improves production cycle times and optimizes productivity. Idling cutting time reduced by 10% Idling Cycle Time Idling Tool Load Management Function Operation rate During cutting operation, abnormal load caused by tool failure is detected and an alarm is triggered to prevent further damage. Function allows users to easily keep track of machine operating hours and the number of completed parts. Power Saving Function The automatic power saving function minimizes power consumption and helps maintain a pleasant working environment. While the machine tool is not operating, it automatically enters 'sleep mode' to save energy, improve the working environment, and protect parts from unnecessary wear. 08 / 09
Product Overview Spindle Power Torque Diagram Basic Information Performance Spindle 2000r/min, Gear box, 37/30 kw (49.6/40.2 Hp), 2592 N.m (1912.9 ft-lbs) Detailed Information Options Applications Diagrams Specifications Customer Support Max. power 37/30 kw (49.6/40.2 Hp) Max. torque 2592 N m (1912.9 ft-lbs) Torque : N. m (ft-lbs) 3000 2592 (1912.9) 2102 (1551.3) 648 (478.2) 525 (387.5) S2 30min, S3 40% Cont. S2 30min, S3 40% Cont. S2 30min, S3 40% Cont. S2 30min, S3 40% Cont. 37 (49.6) 30 (40.2) Output : kw (Hp) 10 High Low 136 415 545 711 1659 2000 Spindle speed : r/min 2000r/min, Gear box, 45/37 kw (60.3/49.6 Hp), 2417 N.m (1783.7 ft-lbs) 1 Max. power 45/37 kw (60.3/49.6 Hp) 3000 2417 (1783.7) 1987 (1466.4) S2 30min, S3 60% Cont. Max. torque 2417 N m (1783.7 ft-lbs) Torque : N. m (ft-lbs) 604 (445.8) S2 30min, S3 60% 497 (366.8) Cont. S2 30min, S3 60% S2 30min, S3 60% Cont. Cont. 45 (60.3) 37 (49.6) Output : kw (Hp) 10 High Low 178 474 711 1896 2000 Spindle speed : r/min
Spindle 2000r/min, 30/22 kw (40.2/29.5 Hp), 1345 N.m (992.6 ft-lbs) 2 Max. power 30/22 kw (40.2/29.5 Hp) 3000 Max. torque 1345 N m (992.6 ft-lbs) Torque : N. m (ft-lbs) 1345 (992.6) S2 30min, S3 25% 986 (727.7) Cont. 645 (476.0) 473 (349.1) S2 30min, S3 60% Cont. S2 30min, S3 25% Cont. S2 30min, S3 60% 30 (40.2) Cont. 22 (29.5) Output : kw (Hp) 10 213 444 556 1111 2000 High 1481 Low Spindle speed : r/min Rotary Tool 4000r/min, 23/7.5 kw (30.8/10.1 Hp), 146 N.m (107.7 ft-lbs) Max power of live tool 23/7.5 kw (30.8/10.1 Hp) Max. torque 146 N m (107.7 ft-lbs) Torque : N. m (ft-lbs) 300 146 (107.7) 95 (70.1) 70 (51.7) 48 (35.4) S3 15% S3 25% S2 30min, S3 60% Cont. S3 15% S3 25% S2 30min, S3 60% Cont. 23 (30.8) 15 (20.1) 11 (14.8) 10 7.5 (10.1) Output : kw (Hp) Max speed of live tool 4000 r/min 10 High Low 100 1000 1500 2000 4000 Spindle speed : r/min 10 / 11
Product Overview External Dimensions Basic Information Performance /M (R type) Top View Unit: mm (inch) Detailed Information Options Applications Diagrams Specifications Customer Support 905 (35.6)** 1580 (62.2)** 630 (24.8) 500 (19.7) Front View 2005 (78.9) 1435 (56.5)* 1085 (42.7)* 860 (33.9) (DOOR OPEN) 910 (35.8) 3110 (122.4) 550 (21.7) 3086 (121.5) 2540 (100.0) R 857 (33.7) 932 (36.7)*** 1505 (59.3) 481.5 (19.0) 2005 (78.9) 650 (25.6)*** 1825 (71.9)* 3830 (150.8) 695 (27.4) * Area for side chip conveyor ** Area for rear chip conveyor *** Area for Auto Tool Changer
/M (L type) Unit: mm (inch) Top View 932 (36.7)*** R857 (33.7) 550 (21.7) 2540 (100.0) 3086 (121.5) 630 (24.8) 905 (35.6)** 481.5 (19.0) 1505 (59.3) 500 (19.7) Front View 1085 (42.7)* 1435 (56.5)* 2005 (78.9) 860 (33.9) (DOOR OPEN) 910 (35.8) 3110 (122.4) 1580 (62.2)** 695 (27.4) 650 (25.6)*** 1825 (71.9)* 3830 (150.8) 2005 (78.9) * Area for side chip conveyor ** Area for rear chip conveyor *** Area for Auto Tool Changer 12 / 13
Product Overview External Dimensions Basic Information Performance /M-2SP Top View Unit: mm (inch) Detailed Information Options Applications Diagrams Specifications Customer Support 4020 (158.3) 1990 (78.3) 630 (24.8) 2540 (100.0) 905 (35.6)** 1580 (62.2)** 876 (34.5) Front View 1085 (42.7)* 1435 (56.5)* 860 (33.9) 10 860 (33.9) 1435 (56.5)* 1085 (42.7)* (DOOR OPEN) (0.4)(DOOR OPEN) 910 (35.8) 3110 (122.4) 550 (21.7) 695 (27.4) 1825 (71.9)* 2005 (78.9) 2005 (78.9) 1825 (71.9)* 3830 (150.8) 3830 (150.8) 695 (27.4) * Area for side chip conveyor ** Area for rear chip conveyor
Tooling System Unit: mm (inch) 12 st Turet 10 st Turet 8 st Turet Standard Ø 60 (2.4) U-Drill Sleeves Ø25 (1.0) Ø32 (1.3) Ø40 (1.6) Ø50 (2.0) U-Drill 12st Turret 선택 U-Drill Sleeves O.D Tool 32 (1.3) Face Tool Holder Extended O.D Tool Holder 10st Turret (4) (5) (6) I.D ToolHolder (H60) Ø 60 (2.4) Boring Bar Sleeves Ø16(0.6)-H60 Ø32(1.3)-H60 Ø20(0.8)-H60 Ø40(1.6)-H60 Ø25(1.0)-H60 Ø50(2.0)-H60 Boring Bar (2) (3) (4) O.D Tool Clamper 8st Turret Drill Sockets MT#2-H60 MT#3-H60 MT#4-H60 MT#5-H60 Drill M Unit: mm (inch) Standard Drill Socket MT#2-H60 MT#3-H60 MT#4-H60 MT#5-H60 Drill Milling Collets ER 40 Ø4(0.2)-Ø20(0.8), Ø22(0.9), Ø25 (1.0) (19 Pieces) Plug (3) Ø60 (2.4) Boring Bar (1) (1) Weldon Adapter (ID 25) (2) Angular Milling Head (2) Straight Milling Head 12st Turret (BMT 75P) I.D Tool Holder (H60) (1) (1) U-Drill Cap Boring Bar Sleeves Ø16(0.6)-H60 Ø32(1.3)-H60 Ø20(0.8)-H60 Ø40(1.6)-H60 Ø25(1.0)-H60 Ø50(2.0)-H60 U-Drill Boring Bar Milling Arbor Adapter (1) (1) (4) Collet Adapter Face Tool Holder O.D Tool Holder 25 14 / 15
Product Overview Tool Interference Diagram Basic Information Performance (2-axis, 8st) Unit: mm (inch) Detailed Information Options Applications Diagrams Specifications Ø830 (32.7) (MAX. TURNING DIA.) Ø414 (16.3) Ø447 (17.6) 8 (0.3) 72 (2.8) Ø60 Ø760 (29.9) (MAX. SWING DIA.) 50 (2.0) Customer Support Ø414 (16.3) 40 (1.6) 75 (3.0) 64 (2.5) Ø830 (32.7) Ø484 (19.1) 80 (3.1) 415 (16.3) 40 (1.6) 265 (10.4) 495 (19.5) (X AXIS TRAVEL) 305 (12.0) 800 (31.5) (2-axis, 10st) Unit: mm (inch) Ø830 (32.7) (MAX. TURNING DIA.) Ø351 (13.8) 8 Ø760 (29.9) (MAX. SWING DIA.) (0.3) 72 (2.8) Ø321 (12.6) Ø680 (26.8) 64 (2.5) Ø323 (12.7) Ø60 (2.4) 50 (2.0) 75 40 (3.0) (1.6) Ø386 (15.2) 80 415 (16.3) 40 265 (10.4) (3.1) (1.6) 495 (19.5) (X AXIS TRAVEL) 305 (12.0) 800 (31.5)
(2-axis,12st) Unit: mm (inch) Ø830 (32.7) (MAX. TURNING DIA.) Ø286 (11.3) 8 72 (0.3) (2.8) Ø569 (22.4) Ø60 (2.4) 50 (2.0) Ø760 (29.9) (MAX. SWING DIA.) Ø258 (10.2) 64 (2.5) Ø261 (10.3) 75 40 (3.0) (1.6) Ø320 (12.6) 80 (3.1) 415 (16.3) 495 (19.5) (X AXIS TRAVEL) 800 (31.5) 40 (1.6) 265 (10.4) 305 (12.0) M (3-axis,12st) Unit: mm (inch) Ø830 (32.7) (MAX. TURNING DIA.) Ø245 (9.6) Ø60 (2.4) 60 (2.4) Ø222 (8.7) 7 (0.3) Ø748 (29.4) (MAX. SWING DIA.) 50 (2.0) Ø279 (11.0) 50(2.0) 74 (2.9) 85 (3.3) Ø258 (10.2) Ø224 (8.8) 60 (2.4) Ø26 (1.0) Ø69 (2.7) 80 415 (16.3) 40 50 215 (8.5) (3.1) (1.6)(2.0) 495 (19.5) (X AXIS TRAVEL) 305 (12.0) 800 (31.5) 16 / 17
Product Overview Working Range Basic Information Unit: mm (inch) Performance OD Holder ID Holder Detailed 8 (0.3) 20 (0.8) Information Options Applications Diagrams Specifications Customer Support HC 15 80 (3.1) 395 (15.6) 495 (19.5) (X AXIS STROKE) 40(1.6) 20 (0.8) 20 (0.8) 34 (1.3) 143 (5.6) 177 (7.0) 780(30.7) (Z AXIS STROKE) HC 15 90 (3.5) 50 (2.0) 385 (15.2) 20 (0.8) 405 (15.9) 495 (19.5) (X AXIS STROKE) 760 (29.9) 42 (1.7) 143 (5.6) 185 (7.3) 780 (30.7) (Z AXIS STROKE) Face Tool Holder Extended OD Holder 40 (1.6) 8 (0.3) 80 (3.1) 20 (0.8) 115 (4.5) 20 (0.8) HC 15 120 (4.7) 355 (14.0) 495 (19.5) (X AXIS STROKE) 20 (0.8) 2 (0.1) 143 (5.6) 145 (5.7) 780(30.7) (Z AXIS STROKE) HC 15 155 (6.1) 320 (12.6) 495 (19.5) (X AXIS STROKE) 20 (0.8) 34 (1.3) 143 (5.6) 177 (7.0) 780(30.7) (Z AXIS STROKE)
M Unit: mm (inch) OD Holder ID Holder 7 (0.3) 57 (2.2) 50 (2.0) 40 (19.5) 50 (2.0) 20 (0.8) 27 (1.1) 90 (3.5) 80 (3.1) 395 (15.6) 20 (0.8) 495 (19.5) (X AXIS STROKE) 780 (30.7) (Z AXIS STROKE) 50 (2.0) 395 (15.6) 50 (2.0) 495 (19.5) (X AXIS STROKE) 780 (30.7) (Z AXIS STROKE) HC 15 143 (5.6) 88 (3.5) HC 15 143 (5.6) 95 (3.7) Face Tool Holder 7 (19.5) Straight Milling Holder 40 (1.6) 60 (2.4) 27 (1.1) 60 (2.4) 47 (1.9) 448 (17.6) 495 (19.5) (X AXIS STROKE) 780 (30.7) (Z AXIS STROKE) 50 (2.0) 445 (17.5) 495 (19.5) (X AXIS STROKE) 780 (30.7) (Z AXIS STROKE) HC 15 143 (5.6) 85 (3.3) HC 15 143 (5.6) 118 (4.6) Angular Milling Holder 77 (3.0) 57.5 (2.3) 67 (2.6) 428 (16.9) 495 (19.5) (X AXIS STROKE) 780 (30.7) (Z AXIS STROKE) HC 15 143 (5.6) 202.5 (8.0) 18 / 19
Product Overview Machine Specifications Basic Information Performance Description Unit M Capacity Swing over bed mm (inch) 920 (36.2) -2SP M-2SP Swing over saddle mm (inch) 740 (29.1) Detailed Information Max. workpiece swing mm (inch) 850 (33.5) Options Applications Recommended turning diameter mm (inch) 380 (15.0) Diagrams Specifications Max. turning diameter mm (inch) 830 (32.7) Max. turning length mm (inch) 750 (29.5) Customer Support Travel Chuck size inch 15 {18 / 21 / 24}* X-axis mm (inch) 495 (-80~415) (19.5(-3.1~16.3)) Travel distance Z-axis mm (inch) 780 (30.7) Feedrate Rapid traverse X-axis m/min 20 (787.4) Z-axis m/min 20 (787.4) Spindle Spindle speed r/min 2000 Spindle moter power (30min/cont.) (FANUC) kw (Hp) 37/30 {45/37, 30/22}* (49.6/40.2 {60.3/49.6, 40.2/29.5}) Spindle motor power (S6 40%/cont.) (SIEMENS) N m (ft-lbs) 2592 {2417, 1345}* (1912.9 {1783.7, 992.6}) Spdinel nose ASA A2-11 Spindle bearing diameter mm (inch) 160 (6.3) C-axis min.indexing angle deg - 0.001-0.001 Turret No.of tool stations ea 8 / 10 / 12 OD tool size mm (inch) 32 x 32 (1.3 x 1.3) 25 x 25 (1.0 x 1.0) 32 x 32 (1.3 x 1.3) 25 x 25 (1.0 x 1.0) Turret indexing time(1st swivel) sec 0.25 Max.rotary tool speed r/min - 4000-4000 Ratary tool motor power (15%/cont) kw (Hp) - 23/7.5 (20.8/10.1) - 23/7.5 (20.8/10.1) Power source Power consumption kva 55.6 63.1 110.7 125.7 Machine dimensions Length x Width mm (inch) 2005 x 2715 (78.9 x 106.9) 4020 x 2715 (158.3 x 106.9) Height mm (inch) 3636 (143.1) Weight kg (lb) 9400 (20723.1) 9500 (20943.6) 18800 (41446.3) 19000 (41887.2) Control CNC system DOOSAN-FANUC i Fanuc 31i * { } : option
CNC Specifications FANUC NO. Division Doosan Fanuc i -2SP Fanuc 31i M Doosan Fanuc i M-2SP Fanuc 31i 1 4 6 Controlled axes 2(X,Z) (X,Z+X,Z) 3(X,Z,C) (X1,Z1,C1 + X2,Z2,C2) 2 Controlled axis Cs contouring control X X 3 Stored limit check before move 4 Unexpected disturbance torque detection function 5 DNC operation with memory card 6 Tool retract and recover 7 Reference position shift Operation 8 Handle interruption 9 Manual handle retrace 10 Active block cancel X X 11 Nano interpolation 12 Circular interpolation 13 Polar coordinate interpolation X X 14 Cylindrical interpolation X X 15 Interpolation functions Helical interpolation X X 16 Thread cutting, synchronous cutting 17 Multi threading 18 Thread cutting retract 19 Polygon machining with two spindles X X 20 AI contour control I Feed function 21 AI contour control II 22 Automatic coordinate system setting 23 Workpiece coordinate system preset 24 Addition of workpiece coordinate system 48 pairs X X 25 Chamfering/Corner R 26 Addition of custom macro common variables #100 - #199, #500 - #999 Program input 27 Interruption type custom macro 28 Multiple repetitive cycles II Pocket profile 29 Canned cycle for drilling 30 Automatic corner override X X 31 Pattern data input 32 Operation EZ Guidei(Conversational Programming Solution) 33 Guidance Function Easy Operation package 34 Auxiliary/Spindle Rigid tap 35 speed function Arbitrary speed threading 36 Tool offset pairs 64-pairs X X 37 Tool offset pairs 99-pairs X X 38 Tool Tool offset pairs 200-pairs 39 function/tool Tool offset pairs 400-pairs X X 40 compensation Tool offset pairs 499-pairs X X 41 Tool offset pairs 999-pairs X X 42 Tool life management 43 44 45 46 47 48 Editing operation Part program storage size & Number of registerable programs Part program storage size & Number of registerable programs Part program storage size & Number of registerable programs Part program storage size & Number of registerable programs Part program storage size & Number of registerable programs Part program storage size & Number of registerable programs 640M(256KB) _500 programs 1280M(512KB) _1000 programs 2560M(1MB) _1000 programs 5120M(2MB) _1000 programs 1280M(512KB) _400 programs 5120M(2MB) _400 programs Standard Optional X Not applicable X X X X X X X X X X X X 49 Playback 50 Fast data server 51 Data input/ External data input 52 output USB memory input/output 53 Automatic data backup 54 Embedded Ethernet Interface function 55 Fast Ethernet 56 Robot interface with PMC I/O module 57 Robot nterface Robot interface with PROFIBUS-DP 58 Robot interface with PROFIBUS-DP 59 Tool Load Monitoring function DMT 60 Others Display unit 10.4" color LCD 61 Tool Load Monitoring function DMT 20 / 21
Product Overview Basic Information Performance Responding to Customers Anytime, Anywhere Detailed Information Options Applications Diagrams Specifications Customer Support AMERICA EUROPE Global Support Network 5Corporations Dealer Networks 122 Technical Centers 3Factories 18 Technical Center: Sales Support, Support, Parts Support
Doosan Machine Tools Global Network, Responding to Customer s Needs nearby, Anytime, Anywhere Doosan machine tools provides a system-based professional support service before and after the machine tool sale by responding quickly and efficiently to customers demands. By supplying spare parts, product training, field service and technical support, we can provide top class support to our customers around the world. Customer Support We help customers to achieve success by providing a variety of professional services from pre-sales consultancy to post-sales support. Supplying Parts CHINA (Shanghai) CHINA (Yantai) JAPAN - Supplying a wide range of original Doosan spare parts - Parts repair service Head Office Changwon Factory Field s INDIA - On site service - Machine installation and testing - Scheduled preventive maintenance - Machine repair Technical Support - Supports machining methods and technology - Responds to technical queries - Provides technical consultancy Domestic Support Network Training Integrated Support Centers 2 Sales Branch Offices 7 Post-Sales Centers 6 Designated Repair Centers 31 - Programming / machine setup and operation - Electrical and mechanical maintenance - Applications engineering 22 / 23
Major Specifications Description Unit /M /M-2SP Max. turning dia. mm (inch) Ø830 (Ø32.7) Capacity Max. turning length mm (inch) 750 (29.5) Chuck size inch 15 {18 / 21 / 24}* Travel Spindle X / Z axis travel distance mm (inch) 495 (415+80) / 780 (19.5 (16.3+3.1) / 30.7) X / Z axis rapid travel speed m/min 20 / 20 Max. spindle speed r/min 2000 Spindle motor power (30min/cont.) kw (Hp) 37/30 {45/37, 30/22}* (49.6/40.2 {60.3/49.6, 40.2/29.5})* Spindle bearing inner dia. mm (inch) Ø160 (Ø6.3) CNC system - DOOSAN FANUC i Fanuc 31i *{ } Option Doosan Machine Tools http://www.doosanmachinetools.com www.facebook.com/doosanmachinetools www.youtube.com/c/doosanmachinetoolscorporation Head Office Yeonkang Bldg., 6th FL., 270, Yeonji-dong, Jongno-gu, Seoul, Korea Tel +82-2-3670-5345 / 5362 Fax +82-2-3670-5382 Doosan Machine Tools China Room 101,201,301, Building 39 Xinzhuan Highway No.258 Songjiang District,China Shanghai(201612) Tel +86 21-5445-1155 Fax +86 21-6405-1472 Doosan Machine Tools Japan #2412, Mita Kokusai Bldg. 1-4-28 Mita, Minato-ku, Tokyo 108-0073, Japan Tel +81 3 5730 9013 Fax +81 3 5730 9016 Doosan Machine Tools America 19A Chapin Rd., Pine Brook, NJ 07058, U.S.A. Tel +1-973-618-2500 Fax +1-973-618-2501 Doosan Machine Tools Europe Emdener Strasse 24, D-41540 Dormagen, Germany Tel +49-2133-5067-100 Fax +49-2133-5067-111 Doosan Machine Tools India 106 / 10-11-12, Amruthahalli, Byatarayanapura, Bellary road, Bangalore-560 092, India Tel +91-80-4266-0122 / 121 / 100 For more details, please contact Doosan Machine Tools. The specifications and information above-mentioned may be changed without prior notice. Doosan Machine Tools Co., Ltd. is a subsidiary of MBK Partners. The trademark the registered trademark holder. Fire Safety Precautions is used under a licensing agreement with Doosan Corporation, There is a high risk or fire when using non-water-soluble cutting fluids, processing flammable materials, neglecting use coolants and modifying the machine without the consent of the manufacturer. Please check the SAFETY GUIDANCE carefully before using the machine.