Electric Forklift Trucks 2,200kg / 2,00kg / 3,000kg / 3,00kg New high Visibility Masts and optional Side Shifting Fork Positioner Password protected elo and HiP performance settings Stop automatic park brake Lowest whole body vibration (WBV) levels Continuous stability enhancement (C) Oil-immersed brakes CANbus technology
Truck Dimensions If b12/2 b13 Ast = Wa + x + l6 + a If b12/2 > b13 Ast = Wa + R + a = Wa + ((l6 + x) 2 + (b12/2 - b13) 2 + a α 4.1 β h4 4. h3 4.4 h6 4.7 h1 4.2 Q c 1.6 h7 4.8 h2 4.3 h10 4.12 s 4.22 m1 4.31 x 1.8 m2 4.32 y 1.9 I 4.22 I2 4.20 l1 4.19 Wa a a 2 2 4.3 b1 4.21 b12 b13 4.36 x 1.8 l2 4.20 l6 Ast 4.33/4.34 Rated Load vs. Load Centre 4000 Standard Carriage Rated Load vs. Load Centre 4000 Sideshift Carriage and Fork Positioner 300 ERP3VL 300 ERP3VL Rated Load (kg) 200 0 ERP2VL ERP22VL ERP30VL Rated Load (kg) 200 0 ERP2VL ERP22VL ERP30VL 00 00 0 0 00 0 Note: s are calculated Load centre 0 0 00 0 Note: s are calculated Load centre Calculations based on: mm (ERP20-2 VL MWB), 460mm (ERP2VL LWB) or 4460mm (ERP30-3 VL) 3 stage FFL mast with mm standard carriage with load backrest. 2
ERP 22VL MWB Mast details and capacity ratings (kg) - superelastic tyres Model Tyre size, front Overall width, front Masts h 1 h 2 +s h 3 +s h 4 Tilt F B ERP 22 VL MWB Load Centre (kg) Load Centre (kg) 00 600 700 00 600 700 219 3390 396 1900 10 2 Stage LFL 239 274 3790 4330 436 4896 1900 0 1990 1820 1810 299 40 396 1880 2190 1980 1800 2 Stage FFL 219 162 3400 3966 1900 10 214 19 490 496 1870 2180 1970 1790 3 Stage FFL 239 184 0 6096 2110 1920 1780 2070 1870 1700 29 204 6000 646 2020 10 1700 1980 1790 1630 All capacities calculated with 0mm long forks and are less load backrest. ERP 2VL MWB, ERP 2VL LWB Mast details and capacity ratings (kg) - superelastic tyres Model Tyre size, front Overall width, front ERP 2 VL MWB ERP 2 VL LWB Masts h 1 h 2 +s h 3 +s h 4 Tilt F B Load Centre (kg) Load Centre (kg) Load Centre (kg) Load Centre (kg) 00 600 700 00 600 700 00 600 700 00 600 700 219 3390 396 200 2 2490 220 2060 200 2170 200 2090 2 Stage LFL 239 274 3790 4330 436 4896 200 200 2130 2120 2490 2470 220 2240 200 2040 200 200 2170 2160 200 200 2090 2080 299 40 396 2480 220 2090 2210 2010 200 210 200 2070 2 Stage FFL 219 162 3400 3966 200 2 200 2600 2060 200 2170 200 2090 214 19 490 496 2210 2060 2400 2170 1980 200 2 200 220 2060 3 Stage FFL 239 184 0 6096 2310 2 1930 220 2030 180 2410 2190 200 2380 210 1960 29 204 6000 646 2210 1840 210 1940 1770 2310 2 1960 2290 2070 0 All capacities calculated with 0mm long forks and are less load backrest. ERP 30VL LWB, ERP 3VL LWB Mast details and capacity ratings (kg) - superelastic tyres Model Tyre size, front Overall width, front ERP 30 VL LWB ERP 3 VL LWB Masts h 1 h 2 +s h 3 +s h 4 Tilt F B Load Centre (kg) Load Centre (kg) Load Centre (kg) Load Centre (kg) 00 600 700 00 600 700 00 600 700 00 600 700 219 14 3200 3861 2720 20 2960 300 3440 3110 2 Stage LFL 239 274 14 14 3600 4 4261 4761 2720 2720 240 230 290 2940 20 2660 2430 300 300 3430 3420 3 3090 299 14 4600 261 2920 260 2460 280 280 2360 3410 3090 3330 3010 2 Stage FFL 219 13 320 3862 2720 20 2960 300 3440 3110 214 4610 22 2970 2690 200 2900 0 2390 3460 3470 300 3 Stage FFL 229 239 160 170 4910 210 2 82 2900 2840 2630 270 2380 20 2760 260 200 2340 2280 3400 3320* 3080 3010* * 3300 3220* 2980 2920* 2660* 264 810 642 2690 220 2600 230 210 3170* 2870* 2640* 3060* 2760* 220* All capacities calculated with 0mm long forks and are less load backrest. * Wide Tread Required 3
VDI 2198 - General Specifications Distinguishing mark Weights Tyres/chassis Dimensions Performance data Electric-engine Addition data 1.1 1.2 Manufacturer (abbreviation) Manufacturer s type designation Model 1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas 1.4 Operator type: hand, pedestrian, standing, seated, order-picker 1. Rated capacity/rated load 1.6 Load centre distance 1.8 Load distance, centre of drive axle to fork 1.9 Wheelbase 2.1 Service weight 2.2 Axle loading, laden front/rear 2.3 Axle loading, unladen front/rear 3.1 Tyres: P = pneumatic, C = cushion, = superelastic 3.2 Tyre size, front 3.3 Tyre size, rear 3. Wheels, number front/rear (x = driven wheels) 3.6 Tread, front 3.7 Tread, rear 4.1 Tilt of mast/fork carriage forward/backward 4.2 Height of mast, lowered 4.3 Free lift 4.4 Lift 4. Height, mast extended 4.7 Height of overhead guard (cabin) 4.7.1 Cab height (open cab) 4.8 Seat height/stand height 4.12 Coupling height 4.19 Overall length 4.20 Length to face of forks 4.21 Overall width* 4.22 Fork dimensions ISO2331 4.23 Fork carriage ISO 2328, class/type A,B 4.24 Fork carriage width 4.31 Ground clearance, laden, below mast 4.32 Ground clearance, centre of wheelbase 4.33 Load dimension b 12 x l 6 crossways 4.34 Aisle width predetermined load dimensions 4.34.1 Aisle width for pallets 0 x 1200 crossways 4.34.2 Aisle width for pallets 800 x 1200 lengthways 4.3 Turning radius 4.36 Internal turning radius 4.41 90 intersecting aisle (With pallet W = 1200mm, L = 0mm) 4.42 Step Height (from ground to running board) 4.43 Step Height.1 Travel speed, laden/unladen.2 Lift speed, laden/unladen.3 Lowering speed, laden/unladen. Drawbar pull, laden/unladen **.6 Max. drawbar pull, laden/unladen ***.7 Gradeability, laden/unladen ****.8 Max. gradeability, laden/unladen ***.9 Acceleration time, laden/unladen.10 Service brake 6.1 Drive motor rating S2 60 min 6.2 Lift motor rating at S3 1% 6.3 Battery according to DIN 4331/3/36 A, B, C, no 6.4 Battery voltage/nominal capacity K 6. Battery weight 6.6 Energy consumption according to VDI cycle 8.1 Type of drive unit 10.1 Operating pressure for attachments 10.2 Oil volume for attachments 10.3 oil tank, capacity 10.7 Sound pressure level at the driver s seat 10.8 Towing coupling, type DIN Max. battery * Standard/Wide tread. ** 60 minute rating *** minute rating **** 30 minute rating Without load backrest. h6 subject to +/- mm tolerance. Add 20mm with cab option. Add 104mm for battery side removal option. Add 124mm for battery side removal with cab option. Q (t) c x y kg kg kg b 10 b 11 α /β ( ) h 1 h 2 h 3 h 4 h 6 h 7 h 10 l 1 l 2 b 1 / b 2 s/e/l b 3 m 1 m 2 b 12 x l 6 A st A st A st W a b 13 km/h m/s m/s N N % % s kw kw (V) / (Ah/Ah) kg kwh/h @ Nr of Cycles bar l/min litres db (A) ERP 22 VL MWB 2.2 00 1606 420 739 / 977 2279 / 2236 938 / 104 / 330 3336 2336 40 / / 0 1200 x 0 3766 1931 173 1981 47 18.0 / 18.0 0.40 / 0.63 0.7 / 0.1 4 / 773 1804 / 1902 10 / 14 26 / 39 4.42 / 4.11 2 x 10.0 4336A 80 / 60 1480 / 163 6. 1 20-40 Bottom of forks. Full suspension in compressed position specified. Add 40mm for nominal position. Add 104mm for battery side removal option. Add 28mm with load backrest. Vertical / horizontal battery removal. ERP 22 VL MWB 2.2 00 1606 40 640 / 1224 2018 / 2646 938 / 104 / 330 3336 2336 40 / / 0 1200 x 0 3766 1931 173 1981 47 21.0 / 21.0 0.2 / 0.72 0.7 / 0.1 601 / 623 19849 / 2076 11 / 16 28 / 42 4.04 / 3.71 4336A 80 / 60 1480 / 163 7.1 1 ERP 2 VL MWB 2. 00 1606 420 6211 / 80 2279 / 2236 938 / 104 / 330 3336 2336 40 / 0 1200 x 0 3766 1931 173 1981 47 18.0 / 18.0 0.38 / 0.63 0.7 / 0.1 91 / 726 1841 / 18897 9 / 13 24 / 3 4.4 / 4.11 4336A 80 / 60 1480 / 163 7.00 1 HiP performance settings. elo performance settings. Manual hydraulics, maximum flow set through dash display. 4
ERP 2 VL MWB 2. 00 1606 4870 6114 / 124 180 / 3063 938 / 104 / 330 3336 2336 40 / / 0 1200 x 0 3766 1931 173 1981 47 21.0 / 21.0 0.49 / 0.72 0.7 / 0.1 6037 / 618 17 / 20409 10 / 14 26 / 38 4.04 / 3.71 4336A 80 / 60 1480 / 163 7.87 1 ERP 2 VL LWB 2. 00 170 4930 62 / 1144 2469 / 248 938 / 104 / 330 3480 2480 40 / / 0 1200 x 0 370 370 3906 2073 2043 47 18.0 / 18.0 0.38 / 0.63 0.7 / 0.1 91 / 726 1841 / 18897 9 / 13 24 / 3 4.4 / 4.11 4336A 1770 / 196 7.89 1 With sideshift carriage add 32mm for ERP22VL - ERP2VL MWB, 34mm for ERP2VL LWB, 33mm for ERP30VL LWB, 32mm for ERP3VL LWB LPAZ, measured according to the test cycles and based on the weighting values contained in EN1203. ERP 2 VL LWB 2. 00 170 4860 61 / 11 20 / 27 938 / 104 / 330 3480 2480 40 / / 0 1200 x 0 370 370 3906 2073 2043 47 21.0 / 21.0 0.49 / 0.72 0.7 / 0.1 6037 / 618 17 / 20409 10 / 14 26 / 38 4.04 / 3.71 4336A 1770 / 196 8.86 1 ERP 30 VL LWB 3.0 00 431 170 000 717 / 841 260 / 2438 938 / 104 / 31 386 3492 2492 0 / 120 / 0 3A 1200 x 0 3762 3762 3918 2073 2043 47 17.0 / 18.0 0.33 / 0.9 0.6 / 0.46 441 / 88 1796 / 18441 8 / 12 22 / 34 4.6 / 4.18 4336A 1770 / 196 8.66 1 Spec sheet truck based on :- 3390mm (ERP22-2 VL) or 3200mm (ERP30-3 VL) 2 stage LFL mast with standard carriage, 0mm forks and load backrest with extended shift on with DIN battery configuration, standard seat and overhead guard, manual hydraulics, superelestic drive and steer tyres. ERP 30 VL LWB ERP 3 VL LWB 3.0 3. 00 00 431 431 170 170 300 320 70 / 1244 7871 / 942 2090 / 3209 208 / 280 938 / 104 938 / 104 / / 31 31 386 386 3492 370 2492 270 0 / 120 / 0 0 / 120 / 0 3A 3A 1200 x 0 1200 x 0 3762 3828 3762 3828 3918 3984 2073 2139 2043 2076 47 47 19. / 21.0 / 18.0 0.42 / 0.63 0.31 / 0.9 0.6 / 0.46 0.8 / 0.46 877 / 603 478 / 720 19393 / 19916 18076 / 1887 9 / 13 7 / 12 24 / 37 20 / 32 4.14 / 3.78 4.60 / 4.23 4336A 4336A 1770 / 196 1770 / 196 9.74 10.03 1 1 All values are nominal values and they are subject to tolerances. For further information, please contact the manufacturer. products might be subject to change without notice. ERP 3 VL LWB 3. 00 431 170 370 772 / 111 2209 / 318 938 / 104 / 31 386 370 270 0 / 120 / 0 3A 1200 x 0 3828 3828 3984 2139 2076 47 18.0 / 21.0 0.37 / 0.63 0.8 / 0.46 918 / 6177 1922 / 2038 8 / 13 22 / 3 4.19 / 3. 4336A 1770 / 196 11.28 1 1.1 1.2 1.3 1.4 1. 1.6 1.8 1.9 2.1 2.2 2.3 3.1 3.2 3.3 3. 3.6 3.7 4.1 4.2 4.3 4.4 4. 4.7 4.7.1 4.8 4.12 4.19 4.20 4.21 4.22 4.23 4.24 4.31 4.32 4.33 4.34 4.34.1 4.34.2 4.3 4.36 4.41 4.42 4.43.1.2.3..6.7.8.9.10 6.1 6.2 6.3 6.4 6. 6.6 8.1 10.1 10.2 10.3 10.7 10.8 Distinguishing mark Weights Tyres/chassis Dimensions Performance data Electric-engine Addition data Lift trucks illustrated may feature optional equipment. s may vary with alternative configurations.
Models: 22VL MWB, 2VL MWB, 2VL LWB, 30VL LWB, 3VL LWB The is available in two configurations &. With enhanced performance characteristics, the configuration has been designed to operate in intensive, high productivity applications with long runs and high lifts as an effective alternative to an engine-powered truck. For example, in comparison to the configuration, top speed (laden) has been increased to up to 21 km/h with faster acceleration, and lifting speeds have been increased by 27%. AC Technology AC technology Class H traction motors are suitable for the most arduous applications. Smooth forward and reverse directional changes provide seamless driving action. In the high-performance or HiP setting, AC technology provides increased acceleration, even when fully laden and on gradients. As well as improving performance, AC technology reduces maintenance and allows service intervals of 0 hours for most components. Brakes The truck is equipped with oil immersed brakes and Stop an automatic park brake spring applied, electro magnetically released park brake. The park brake is automatically set by the control system, so that the brake is always set whenever the truck is not moving, and no traction has been requested. Moreover the park brake provides controllability on ramp applications. When the footbrake is applied the intelligent control system uses e-boost which increases the strength of the autoregen function of the traction motors. This also decreases the amount of work executed by the oil immersed dise brakes resulting in reduced wear on the brakes. Steering A 16kW () or 24kW () AC motor drives a pump which provides oil pressure for the hydraulic pump and for steering, eliminating the need for a separate steering motor and pump. The steering column is infinitely adjustable in a range of 26º. During cornering the speed of the drive motors is continuously adjusted independently 6 by the traction controller ensuring smooth operation. The VL features a state-of-the-art extended steer-axle that has increased articulation of the steer wheels, allowing it to turn in smaller spaces than a conventional 4wheel steer-axle. Performance modes Performance of the truck can be tailored via the enhanced overhead display, with 4 performance modes available to suit the requirements of the application or the preferences of the driver. For maximum speed and acceleration, choose mode 4, or for more delicate maneuvering and extended battery life, mode 1 is ideal. Your service technician can alter the top speed and acceleration of mode 4, with modes 1, 2 and 3 being automatically adjusted as percentages of setting 4. elo and HiP Settings VL trucks feature an elo energy saving setting which provides exceptional energy efficient performance when required for continuous operation over longer periods without recharging the battery. The HiP high performance setting (accessible via the dash display with a service password) changes the torque curve characteristics of the motor to give the truck increased torque, faster acceleration and increased speed on a grade for the most demanding applications whilst maintaing the same top speed as the elo setting. elo provides maximum battery autonomy.
Improved ergonomics The VL is designed for optimum operator comfort. The overhead guard mounted grab handle, seat armrest (hinged) and very low step height provide class leading three point entry and exit to the operator module. The operator is seated in an ergonomically designed position for maximum safety, comfort, visibility and ease of operation. A full suspension seat provides 80mm of suspension and the lowest WBV levels in the industry. A swivel seat option for a superior reverse driving position is available. Both the mini-lever module and the manual levers have an integrated direction switch. The ergonomically designed gas spring assisted steering column has infinite forward and reverse adjustment through 260, can be telescopically adjusted by 7mm. Synchronised steering which further increases operator comfort and operation also features steer column memory tilt (option). The medium wheelbase model (MWB) has a smaller capacity battery and delivers increased maneuverability and reduced stacking aisle dimensions. The long wheelbase model (LWB) provides extra battery space for longer shift life. A battery discharge indicator (BDI) and lift interrupt are standard on all trucks. Options AccuTouch mini-levers Return to set tilt (RTST) Foot directional control Lighting kits, including LED lights Reverse alarm Integrated sideshift Low lifetime costs Two battery extraction methods:lower service costs are achieved as a 1. Overhead result of less maintenance associated 2. Side extraction with oil immersed brakes, hall effect Weather protection sensors, electric park brake and CANbus and AC technology. The Low noise cab transmission is sealed for life, eliminating the need for service, an oil change is required at 4000 hours. LED light packages are offered as an option. Service intervals are 0 hours for most components and 4000 hours for oil immersed brakes, drive axle, transmission and hydraulic oil. Auto Regen Braking optimises the shift life of the battery and contributes to an increase in the life of parts. The truck also features generous floor and storage space. The clear footwell allows easy access from both sides of the truck when the optional mini lever module fitted. Continuous Stability Enhancement (C) This is a mechanical system which uses gravity to optimize the design geometry of the steer axle. It reduces lean by limiting the articulation of the steer axle and does not compromise the trucks ability to operate over poor ground conditions or traverse obstacles. It is also % maintenance free. Masts A full range of Hi-Vis 2 stage LFL and 2 and 3 stage FFL masts are available. The redesigned Hi-Vis mast incorporates new chain placement and hose routings that maximise fork visibility for the driver. As well as enlarging the window through the mast, the 180 degree panoramic field of vision is improved. Battery A choice of DIN batteries from 60Ah/620Ah - 700Ah/77Ah (wheelbase dependent) are available. 7
Models: 22VL MWB, 2VL MWB, 2VL LWB, 30VL LWB, 3VL LWB HYSTER-YALE UK LIMITED trading as Europe Materials Handling Centennial House, Frimley Business Park, Frimley, Surrey GU16 7SG, United Kingdom. Tel: +44 (0) 1276 3800 Fax: +44 (0) 1276 389 www.yale-forklifts.eu Publication part no. 22099007 Rev.06 Printed in The Netherlands (0216HG) EN. Safety: This truck conforms to the current EU requirements. Specification is subject to change without notice., VERACITOR and are registered trademarks. PEOPLE, PRODUCTS, PRODUCTIVITY, PREMIER, Hi-Vis, and CSS are trademarks in the United States and certain other jurisdictions. MATERIALS HANDLING CENTRAL and MATERIAL HANDLING CENTRAL are Service Marks in the United States and certain other jurisdictions. is a Registered Copyright. Europe Materials Handling 2016. All rights reserved. Truck shown with optional equipment. Country of Registration: England and Wales. Company Registration Number: 02637