ERGONOMIC FEATURES & BENEFITS

divider Seating Actin... 10 Lite-Lift... 44 Altona... 10 Locate... 45 Amira... 11 M-Task... 48 Annapolis... 12 Minto... 49 Archer... 13 MVL File Buddy... 50 Ashmont... 14 Nemo... 51 Avro... 15 Newcastle... 52 Beta... 20 Otto... 53 Bolt... 21 Overtime... 54 Brighton... 21 Overtime 350... 54 Caman... 22 Pacer... 55 Capra... 23 Pacific... 55 Centro... 23 Part-Time... 56 Cobalt... 24 Retro... 57 Craft... 25 Safari... 58 Dakota... 26 Six 13... 58 Danio... 26 Six 31... 59 Dash... 28 Soda... 60 Dori... 28 Stacklite... 60 Format... 29 Stradic... 61 Full-Time... 30 Tami... 62 Gennex... 31 Thompson... 63 Geo... 32 Toma... 63 Granby... 33 Tumi... 64 Harvest... 34 Ultra... 65 Humber... 34 Valan... 67 Ibex... 35 Vanier... 68 Java... 41 Vos... 69 Kazan... 42 Woodbridge... 70 Keno... 42 Yoho... 71 Kylie... 43.

ERGONOMIC FEATURES & BENEFITS EACH GLOBAL CHAIR IS BUILT WITH FEATURES THAT ARE ERGONOMICALLY DESIGNED TO PROMOTE GOOD POSTURE AND PROVIDE MAXIMUM COMFORT. WHILE FULLY SUPPORTING YOUR BODY, THESE FEATURES SHOULD ALSO ALLOW YOU TO ADJUST YOUR CHAIR TO FIT YOU. A TENSION ADJUSTMENT Increase or decrease to match body weight. Allows you to rock comfortably, without heavy pushing, reducing muscle fatigue. L SYNCHRO-TILT MOVEMENT Backrest reclines at a faster rate than the seat, increasing the angle between your torso and thighs. Enhances comfort and encourages dynamic body movement. B CHAIR TILT LOCK Lock the tilt movement in position(s) to accommodate your working posture. Allows you to lock your chair in a comfortable and supportive position. (Can be either single position, multiple position or infinite position.) M WATERFALL SEAT EDGE Reduces pressure at the back of your knees, contributing to good blood flow. C SEAT HEIGHT Raise or lower to allow your feet to rest flat on the floor. Avoids pressure under your thighs, easing blood flow. N CONTOURED CUSHION Supports the body effectively, allowing you to sit longer without discomfort. D BACK/LUMBAR HEIGHT ADJUSTMENT Raise or lower to position lumbar support in your lumbar area. Reduces likelihood of back pain. P VIBRATING SEAT & BACK Soothing effect contributes to your relaxation during work breaks. E SEAT DEPTH Change the depth of the seat to accommodate the length of your thighs. Keeps your back in contact with the backrest while avoiding pressure behind your knees. Can be sliding (MD) or manual. Q WIDTH ADJUSTABLE ARMS Allows outward movement of armrests to match shoulder breadth. Ensures armrests properly support forearms, reducing muscular efforts in neck and shoulders. F SEAT ANGLE ADJUSTMENT Allows chair to tilt forward changing the angle of your thighs in relation to the floor. Helps reduce disc pressure during forward leaning tasks. top view R ARM ROTATION Rotate armcaps to support your forearms in various positions. Reduces muscular effort in neck and shoulders minimizing risk of pain. G BACK ANGLE ADJUSTMENT Adjust to change the angle of your torso in relation to your thighs. Helps reduce disc pressure and relaxes your back muscles. S CENTER TILT Chair tilts from a pivot point under the center of the seat allowing you to rock. When your feet are well supported, blood flow is enhanced. H ARM HEIGHT Raise or lower to support your forearms. Reduces muscular effort in neck and shoulders, minimizing risk of pain. U SOFT DESCENT PNEUMATIC LIFT Gently and gradually lowering the seat helps you easily select proper seat height without causing a jerking motion. J KNEE-TILT MOVEMENT Chair tilts from a pivot point at the front of the seat, keeping your feet on the floor as you rock. Maintains stability. V LUMBAR DEPTH ADJUSTMENT Increase or decrease curvature of the back to match the profile of your lower back. Enhances comfort and support in the lower lumbar area. MAXIMIZING YOUR ERGONOMIC SEATING Always select a chair that is designed for the type of work you perform and make certain the chair is comfortable for the length of time spent using it. Ensure that the seat and back cushions are contoured to fit your body, which will help eliminate pressure points. An ergonomically designed chair should allow changing positions easily. As you work, reposition yourself throughout the day to reduce strain and stress on specific muscle groups. If you change job functions, adjust your chair to fit the new task. Proper ergonomic seating should help eliminate many of the work related injuries that result from poor posture and poorly designed chairs. 8 officestogocanada.com

MECHANISM ADJUSTMENTS TASK POSTURE TASK 2 8 6 3 2 NOTES * Select models only. ** Ratchet back height adjustment on select models. Mechanisms shown are generic depictions and may differ from one chair to another. ADJUSTMENTS (2) Pneumatic seat height (8) Manual seat depth Back/lumbar height ** Swivel ADJUSTMENTS (2) Pneumatic seat height (3) Back angle (6) Back/lumbar height ** Seat depth * Swivel TILTER MULTI-TILTER 2 9 4 2 1 3 9 1 8 ADJUSTMENTS (1) Tilt tension (2) Pneumatic seat height (9) Multiple position tilt lock * Center tilt action Swivel ADJUSTMENTS (1) Tilt tension (2) Pneumatic seat height (3) Back angle adjustment (4) Seat angle (8) Sliding seat depth adjustment (MD) (9) Infinite position tilt lock Back/lumbar height ** Center tilt action Swivel SYNCHRO-TILTER OPERATOR 2 1 9 2 3 + 4 ADJUSTMENTS (1) Tilt tension (2) Pneumatic seat height (9) Multiple position tilt lock/ synchro tilt action Anti kick back Back/lumbar height ** Swivel ADJUSTMENTS (2) Pneumatic seat height (3) Back angle *(free float/lock) (4) Seat angle *(free float/lock) Back/lumbar height ** With single lever operator mechanism, seat and back angle are controlled using lever 4 * Swivel officestogocanada.com 9

A ACTIN / ACTIN ACTIN Value priced multi-tilter. Fully upholstered seat and back. Standard with height adjustable arms. Dual wheel carpet casters (C65) are standard. Upholstered in Black Quilt (QL10) only. SEATING Multi-tilter mechanism with infinite position tilt lock. Tilt tension adjustment. Independent back and seat angle adjustment. Seat depth adjustment. Ratchet back height adjustment. model OTG11950B (C65R). Add $76/set. OTG11950B 425 Black Quilt fabric IN 26.5 23.5 39 20.5 17 17.5-21.5 19 19.5 Medium Back Multi-Tilter MM 673 597 991 521 432 445-546 483 495 Unit weight: 47 LB 21.4 KG Carton weight: 53 LB 24.04 KG Carton volume: 7.5 FT³ 0.21 MT³ A, B, C, D, E, G, H, M, N, S ALTONA Altona offers comfort and generous proportions at an affordable price. Durable nylon arms are standard. Dual wheel carpet casters (C65) are standard. OTG11615B is upholstered in Black Quilt (QL10). OTG11616B seating surfaces are upholstered in Black (PU30/BL20). Tilter mechanism with upright tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11616B OTG11615B 269 Black Quilt fabric OTG11616B 285 Black Luxhide leather IN 24 26.5 41 20 19 16.5-20.5 20.5 23 High Back Tilter MM 610 673 1041 508 483 419-521 521 584 Unit weight: 32 LB 14.5 KG Carton weight: 37 LB 16.78 KG Carton volume: 4.56 FT³ 0.12 MT³ A, B, C, M, N, S 10 officestogocanada.com

SEATING AMIRA Mesh back and upholstered seat tilter chair. Soft scultpted frame design. Fixed loop arms. Black base with dual wheel carpet casters (C65) is standard. Seat can be upholstered in Black polyester with Black mesh back (BLK) or in Blue polyester with Blue/Grey mesh back (BLU). Center tilt with upright position tilt lock. Tilt tension adjustment. AMIRA A (C65R). Add $76/set. model OTG13020 OTG13020 299 IN 23.5 25 40.5 20.5 18 17-21 18.5 21 Medium Mesh Back Tilter MM 597 635 1029 521 457 432-533 470 533 Unit weight: 26 LB 11.8 KG Carton weight: 31 LB 14.06 KG Carton volume: 4.6 FT³ 0.13 MT³ A, B, C, M, N, S officestogocanada.com 11

A ANNAPOLIS ANNAPOLIS model MVL2732 Simple function, great price. Canadian made. Durable nylon arms are standard. Dual wheel carpet casters (C65) are standard. MVL2732 and MVL2732-9 seating surfaces can be upholstered in, in various colors (see page 119). MVL2733 and MVL2733-9 can be upholstered in all Global grade 1 seating textiles (see page 119). SEATING Tilter mechanism with upright tilt lock. Tilt tension adjustment. (C65R). Add $16/set MVL2732 291 IN 25.5 28 43 20.5 19.5 16-20 20.5 24 High Back Tilter - Assembled MM 648 711 1092 521 495 406-508 521 610 Unit weight: 36 LB 16.4 KG Carton weight: 40 LB 18.14 KG Carton volume: 11.5 FT³ 0.32 MT³ A, B, C, M, N, S RTA 1 MVL2732-9 291 IN 25.5 28 43 20.5 19.5 16-20 20.5 24 High Back Tilter - Condensed Packaging MM 648 711 1092 521 495 406-508 521 610 Unit weight: 36 LB 16.4 KG Carton weight: 40 LB 18.14 KG Carton volume: 6 FT³ 0.16 MT³ A, B, C, M, N, S MVL2733 291 IN 25.5 28 43 20.5 19.5 16-20 20.5 24 High Back Tilter - Assembled MM 648 711 1092 521 495 406-508 521 610 Unit weight: 36 LB 16.4 KG Carton weight: 40 LB 18.14 KG Carton volume: 11.5 FT³ 0.32 MT³ A, B, C, M, N, S RTA 1 MVL2733-9 291 IN 25.5 28 43 20.5 19.5 16-20 20.5 24 High Back Tilter - Condensed Packaging MM 648 711 1092 521 495 406-508 521 610 Unit weight: 36 LB 16.4 KG Carton weight: 40 LB 18.14 KG Carton volume: 6 FT³ 0.16 MT³ A, B, C, M, N, S 12 officestogocanada.com

SEATING ARCHER A ARCHER model MVL3161F Canadian made. Upholstered seat and polyamide patterned mesh back. Standard with height and width adjustable arms with soft self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C1) are standard. Mesh back can be upholstered in Black (MT70), Blackberry (MT74), Chestnut (MT75), Navy (MT72), Red (MT71) and Toffee (MT73). MVL3161 seat can be upholstered in Luxhide bonded leather, in various colors (see page 119). MVL3161F seat can be upholstered in all Global grade 1 seating textiles (see page 119). Synchro tilt mechanism with upright position tilt lock. Tilt tension adjustment. (C9R). Add $16/set. MVL3161 536 MVL3161F 536 IN 25 22.5 41 20.5 17.5 16-21 19.5 23 Synchro-Tilter, Mesh High Back and Uph Seat MM 635 572 1041 521 445 406-533 495 584 Unit weight: 41 LB 18.6 KG Carton weight: 53 LB 24.04 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, H, L, M, N, Q officestogocanada.com 13

A ASHMONT SEATING ASHMONT model MVL2780 model MVL2782 Canadian made. Soft deep cushions on seat and back offer plush comfort. Management chairs: Height adjustable T-arms with durable self-skinned urethane (SSU) armcaps. Guest chairs: Upholstered armcaps, oval steel tube frame and sled base. Dual wheel carpet casters (C65) are standard (except guest chairs). MVL2780, MVL2781 and MVL2782 seating surfaces can be upholstered in Luxhide bonded leather, in various colors (see page 119). MVL2780F, MVL2781F and MVL2782F can be upholstered in all Global grade 1 seating textiles (see page 119). MANAGEMENT Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set MVL2780 566 MVL2780F 566 IN 27 28 42 21 18 16-21 21 25 HB Management Tilter w/height Adjustable Arms MM 686 711 1067 533 457 406-533 533 635 Unit weight: 50 LB 22.7 KG Carton weight: 55 LB 24.95 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, H, M, N, S MVL2781 537 MVL2781F 537 IN 27 28 39 21 18 16-21 21 22 MB Management Tilter w/height Adjustable Arms MM 686 711 991 533 457 406-533 533 559 Unit weight: 47 LB 21.4 KG Carton weight: 52 LB 23.59 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, H, M, N, S MVL2782 403 Black Luxhide leather MVL2782F 403 IN 24.5 25.5 36.5 21 18 17 21 18 MB Guest Chair - Sled Base MM 622 648 927 533 457 432 533 457 Unit weight: 33 LB 15 KG Carton weight: 38 LB 17.24 KG Carton volume: 8.5 FT³ 0.24 MT³ M, N 14 officestogocanada.com

SEATING AVRO A AVRO model MVL3101 model MVL3114 model MVL3123 model MVL3107 Avro features improved ergonomics, custom support and a steamlined profile the perfect balance between functionality and style. Ergonomic seating, Canadian made. Available with five different mechanism options: synchro-tilter, multi-tilter, tilter, task and weight sensing synchro-tilter. (Drafting chairs with task mechanism only.) Standard with height adjustable arms with durable self-skinned urethane (SSU) armcaps (except armless models). Dual wheel carpet casters (C1) are standard on all models. Mesh back and mesh seat models can only be upholstered in Black mesh (MS69). Mesh back and upholstered seat models: Mesh back is available in Black (MS69), Natural (MS74) and Stone (MS71). Seats can be upholstered in Luxhide bonded leather (various colors) or in all Global grade 1 seating textiles (see page 119). For a fabric seat specify models ending in F. (C9R). Add $16/set. For optional polished aluminum base, please specify (ALU). Add $105. For optional height and width adjustable T-arms with sliding, articulating armcaps, please specify (G1). Add $57. Synchro-tilter chairs - Synchro tilt with multi position tilt lock. - Tilt tension adjustment. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. Multi-tilter chairs - Infinite position tilt lock. - Tilt tension adjustment. - Independent back and seat angle adjustment. - Side activated sliding seat depth adjustment. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. Tilter chairs - Center tilt with upright position tilt lock. - Tilt tension adjustment. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. Task chairs - Manual bolt seat depth adjustment. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. Weight sensing synchro-tilter chairs - Synchro tilt with multi position tilt lock. - Automatic tilt tension adjustment. - Side activated sliding seat depth adjustment. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. Drafting chairs - Task mechanism. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. - Height adjustable Chrome footrest. ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. MVL3101 573 MVL3101F 573 IN 26 27 38.5 20 18.5 16.5-21.5 19.5 20 Synchro-Tilter, Mesh Back and Uph Seat MM 660 686 978 508 470 419-546 495 508 Unit weight: 42 LB 19.1 KG Carton weight: 51 LB 23.13 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N, V MVL3103 618 MVL3103F 618 IN 26 27 39.5 20 17.5-20.5 17.5-22.5 19.5 20 Multi-Tilter, Mesh Back and Uph Seat MM 660 686 1003 508 445-521 445-572 495 508 Unit weight: 47 LB 21.4 KG Carton weight: 56 LB 25.4 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D F, G, H, M, N, S, V officestogocanada.com 15

A AVRO SEATING MVL3104 551 MVL3104F 551 IN 26 27 38 20 18.5 16-21 19.5 20 Tilter, Mesh Back and Uph Seat MM 660 686 965 508 470 406-533 495 508 Unit weight: 36 LB 16.4 KG Carton weight: 45 LB 20.41 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, M, N, S, V MVL3106 510 MVL3106F 510 IN 26 27 38 20 18.5 16-21 19.5 20 Task, Mesh Back and Uph Seat MM 660 686 965 508 470 406-533 495 508 Unit weight: 31 LB 14.1 KG Carton weight: 40 LB 18.14 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M, N, V MVL3107 596 MVL3107F 596 IN 20 27 48 20 18.5 23-33 19.5 20 Armless Drafting, Mesh Back and Uph Seat MM 508 686 1219 508 470 584-838 495 508 Unit weight: 30 LB 13.6 KG Carton weight: 39 LB 17.69 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M, N, V MVL3108 675 MVL3108F 675 IN 26 27 39 20 17.5-20.5 16.5-21.5 19.5 20 Weight Sensing Synchro-Tilter, Mesh Back and Uph Seat MM 660 686 991 508 445-521 419-546 495 508 Unit weight: 42 LB 19.1 KG Carton weight: 51 LB 23.13 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, L, M, N, V MVL3109 653 MVL3109F 653 IN 26 27 48 20 18.5 23-33 19.5 20 Drafting w/arms, Mesh Back and Uph Seat MM 660 686 1219 508 470 584-838 495 508 Unit weight: 36 LB 16.4 KG Carton weight: 45 LB 20.41 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M, N, V 16 officestogocanada.com

SEATING AVRO A MVL3111 639 MVL3111F 639 IN 26 27 38.5 20 18.5 16.5-21.5 19.5 20 Synchro-Tilter, Uph Back and Seat MM 660 686 978 508 470 419-546 495 508 Unit weight: 43 LB 19.5 KG Carton weight: 52 LB 23.59 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N, V MVL3113 685 MVL3113F 685 IN 26 27 39.5 20 17.5-20.5 17.5-22.5 19.5 20 Multi-Tilter, Uph Back and Seat MM 660 686 1003 508 445-521 445-572 495 508 Unit weight: 48 LB 21.8 KG Carton weight: 57 LB 25.85 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, F, G, H, M, N, S, V MVL3114 618 MVL3114F 618 IN 26 27 38 20 18.5 16-21 19.5 20 Tilter, Uph Back and Seat MM 660 686 965 508 470 406-533 495 508 Unit weight: 37 LB 16.8 KG Carton weight: 46 LB 20.87 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, M, N, S, V MVL3116 576 MVL3116F 576 IN 26 27 38 20 18.5 16-21 19.5 20 Task, Uph Back and Seat MM 660 686 965 508 470 406-533 495 508 Unit weight: 32 LB 14.5 KG Carton weight: 41 LB 18.6 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M, N, V MVL3117 663 MVL3117F 663 IN 20 27 48 20 18.5 23-33 19.5 20 Armless Drafting, Uph Back and Seat MM 508 686 1219 508 470 584-838 495 508 Unit weight: 31 LB 14.1 KG Carton weight: 40 LB 18.14 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M, N, V officestogocanada.com 17

A AVRO SEATING MVL3118 741 MVL3118F 741 OVERALL DIMENSIONS W D H IN 26 Weight Sensing Synchro-Tilter, Uph Back and Seat MM 660 Unit weight: 43 LB 19.5 KG Carton weight: 52 LB 23.59 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, L, M, N, V 27 686 720 MVL3119F 720 IN 26 27 Drafting w/arms, Uph Back and Seat MM 660 686 Unit weight: 37 LB 16.8 KG Carton weight: 46 LB 20.87 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M, N, V 26 20 508 18.5 470 23-33 584-838 BACK DIMENSIONS W H 19.5 495 20 508 27 38.5 978 SEAT DIMENSIONS W D H 20 508 18.5 470 16.5-21.5 419-546 BACK DIMENSIONS W H 19.5 495 20 508 707 OVERALL DIMENSIONS W D H IN 26 Multi-Tilter, Mesh Back and Seat MM 660 Unit weight: 48 LB 21.8 KG Carton weight: 57 LB 25.85 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, F, G, H, M, S, V 27 686 39.5 1003 SEAT DIMENSIONS W D H 20 508 17.5-20.5 17.5-22.5 445-521 445-572 BACK DIMENSIONS W H 19.5 495 20 508 639 OVERALL DIMENSIONS W D H IN 26 27 Tilter, Mesh Back and Seat MM 660 686 Unit weight: 37 LB 16.8 KG Carton weight: 46 LB 20.87 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, M, S, V 18 SEAT DIMENSIONS W D H MVL3124 Black mesh 48 1219 OVERALL DIMENSIONS W D H IN 20 508 662 Synchro-Tilter, Mesh Back and Seat MM 660 686 Unit weight: 43 LB 19.5 KG Carton weight: 52 LB 23.59 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, V MVL3123 Black mesh 19.5 495 17.5-20.5 16.5-21.5 445-521 419-546 OVERALL DIMENSIONS W D H MVL3121 Black mesh 20 508 BACK DIMENSIONS W H MVL3119 39 991 SEAT DIMENSIONS W D H 38 965 SEAT DIMENSIONS W D H 20 508 18.5 470 16-21 406-533 BACK DIMENSIONS W H 19.5 495 20 508 officestogocanada.com

SEATING AVRO A MVL3126 599 Black mesh IN 26 27 38 20 18.5 16-21 19.5 20 Task, Mesh Back and Seat MM 660 686 965 508 470 406-533 495 508 Unit weight: 32 LB 14.5 KG Carton weight: 41 LB 18.6 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M, V MVL3127 685 Black mesh IN 20 27 48 20 18.5 23-33 19.5 20 Armless Drafting, Mesh Back and Seat MM 508 686 1219 508 470 584-838 495 508 Unit weight: 31 LB 14.1 KG Carton weight: 40 LB 18.14 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M, V MVL3128 763 Black mesh IN 26 27 39 20 17.5-20.5 16.5-21.5 19.5 20 Weight Sensing Synchro-Tilter, Mesh Back and Seat MM 660 686 991 508 445-521 419-546 495 508 Unit weight: 43 LB 19.5 KG Carton weight: 52 LB 23.59 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, L, M, V MVL3129 741 Black mesh IN 26 27 48 20 18.5 23-33 19.5 20 Drafting w/arms, Mesh Back and Seat MM 660 686 1219 508 470 584-838 495 508 Unit weight: 37 LB 16.8 KG Carton weight: 46 LB 20.87 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M, V officestogocanada.com 19

B BETA SEATING BETA model MVL2729 model MVL2718 Posture task chairs. Canadian made. Generous size seat and back, fully upholstered. Standard with height adjustable T-arms with durable self-skinned urethane (SSU) armcaps (except armless models). Drafting chairs are equipped with a height adjustable Chrome footrest. Dual wheel carpet casters (C65) are standard. Can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Infinite back angle and back height adjustment. (C65R). Add $16/set. MVL2718 417 IN 20.5 23.5 44 20.5 16.5 22-30 18.5 16-19 Armless Posture Task Drafting MM 521 597 1118 521 419 559-762 470 406-483 Unit weight: 41 LB 18.6 KG Carton weight: 46 LB 20.87 KG Carton volume: 6.75 FT³ 0.19 MT³ C, D, G, M, N MVL2719 488 IN 24.5 23.5 44 20.5 16.5 22-30 18.5 16-19 Posture Task Drafting w/arms MM 622 597 1118 521 419 559-762 470 406-483 Unit weight: 46 LB 20.9 KG Carton weight: 51 LB 23.13 KG Carton volume: 6.75 FT³ 0.19 MT³ C, D, G, H, M, N MVL2728 270 IN 20.5 22 38.5 20.5 17 16.5-21.5 18.5 16-20 Armless Posture Task MM 521 559 978 521 432 419-546 470 406-508 Unit weight: 27 LB 12.3 KG Carton weight: 31 LB 14.06 KG Carton volume: 4.9 FT³ 0.13 MT³ C, D, G, M, N MVL2729 342 IN 24 22 38.5 20.5 17 16.5-21.5 18.5 16-20 Posture Task w/arms MM 610 559 978 521 432 419-546 470 406-508 Unit weight: 33 LB 15 KG Carton weight: 38 LB 17.24 KG Carton volume: 6.75 FT³ 0.19 MT³ C, D, G, H, M, N 20 officestogocanada.com

SEATING BETA / BOLT / BRIGHTON B MVL2784 84 IN 3 10 12 - - - - - Height Adjustable T-Arms - 1 pair MM 76 254 305 - - - - - Unit weight: 8 LB 3.6 KG Carton weight: 10 LB 4.54 KG Carton volume: 1.3 FT³ 0.03 MT³ 1 pair per carton (pricing is for the pair, specifications are for one arm) BOLT model OTG11510B Value priced mesh seating. Breathable mesh back. Scuff resistant arched base. Standard with height adjustable T-arms with durable self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. Only available in a Black mesh fabric seat (MS20) with a Black mesh back. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. OTG11510B 368 IN 25 21.5 35.5 19.5 17 17.5-21.5 18 16.5 Tilter, Mesh Back MM 635 546 902 495 432 445-546 457 419 Unit weight: 30 LB 13.6 KG Carton weight: 36 LB 16.33 KG Carton volume: 4.6 FT³ 0.13 MT³ A, B, C, H, M, N, S BRIGHTON model MVL2787 High back management chair. High comfort design, Canadian made. Contoured seat and back with integrated headrest. Black arms and base. Loop arms with upholstered armcaps. Dual wheel carpet casters (C65) are standard. Seating surfaces can be upholstered in Luxhide bonded leather, in various colors (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. MVL2787 566 IN 26.5 28 44 21.5 20 16-21 20 25.5 High Back Tilter MM 673 711 1118 546 508 406-533 508 648 Unit weight: 42 LB 19.1 KG Carton weight: 54 LB 24.49 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, M, N, S officestogocanada.com 21

C CAMAN SEATING CAMAN model MVL11886 model MVL11888 Canadian made. Welded steel frame in Black finish. Fixed arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard (except guest chairs). MVL11886, MVL11887 and MVL11888 seating surfaces can be upholstered in Luxhide bonded leather, in various colors (see page 119). MVL11886F, MVL11887F and MVL11888F can be upholstered in all Global grade 1 seating textiles (see page 119). TILTER Center tilt with upright position tilt lock Tilt tension adjustment. (C65R). Add $16/set. MVL11886 400 MVL11886F 400 IN 25 27 40 20.5 18 16-20 19.5 22.5 High Back Tilter MM 635 686 1016 521 457 406-508 495 572 Unit weight: 31 LB 14.1 KG Carton weight: 35 LB 15.88 KG Carton volume: 20.25 FT³ 0.57 MT³ A, B, C, M, N, S 2 per carton MVL11887 389 MVL11887F 389 IN 24.5 24.5 35 20 18 16-20 20 17.5 Medium Back Tilter MM 622 622 889 508 457 406-508 508 445 Unit weight: 31 LB 14.1 KG Carton weight: 35 LB 15.88 KG Carton volume: 20.25 FT³ 0.57 MT³ A, B, C, M, N, S 2 per carton MVL11888 336 MVL11888F 336 IN 24.5 25 33 20 18 17 20 17 Medium Back Guest Chair - Sled Base MM 622 635 838 508 457 432 508 432 Unit weight: 23 LB 10.5 KG Carton weight: 27 LB 12.25 KG Carton volume: 20.25 FT³ 0.57 MT³ M, N 2 per carton 22 officestogocanada.com

SEATING CAPRA / CENTRO C CAPRA General purpose guest chair. Chrome oval tube four-legged frame. Contoured seat cushion with waterfall edge. Perforated polypropylene back with Black air mesh fabric seat. Nylon arms. Stackable up to 4 high. model OTG11740B OTG11740B 276 IN 24.5 22.5 34 18 18 18 18 15 Plastic Back Guest Chair Stacks 4 high. MM 622 572 864 457 457 457 457 381 Unit weight: 20 LB 9.1 KG Carton weight: 27 LB 12.25 KG Carton volume: 14.75 FT³ 0.41 MT³ M, N 2 per carton CENTRO Multi-purpose guest chair. Durable oval steel four-legged frame. Contoured back and seat cushions with waterfall seat edge. Upholstered armcaps. Seating surfaces are upholstered in Black. model OTG3915 OTG3915 299 IN 24.5 27 33.5 21.5 18.5 17 21.5 16 Guest Chair MM 622 686 851 546 470 432 546 406 Unit weight: 26 LB 11.8 KG Carton weight: 30 LB 13.61 KG Carton volume: 6.25 FT³ 0.17 MT³ M, N officestogocanada.com 23

C COBALT SEATING COBALT model MVL2785 General purpose medium back tilter. Canadian made. Standard with height adjustable T-arms with durable self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. MVL2785 seating surfaces can be upholstered in, in various colors (see page 119). MVL2785F can be upholstered in all Global grade 1 seating textiles (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. MVL2785 360 MVL2785F 360 IN 25.5 24.5 36 20 17 15.5-19.5 18.5 18 Medium Back Tilter MM 648 622 914 508 432 394-495 470 457 Unit weight: 35 LB 15.9 KG Carton weight: 40 LB 18.14 KG Carton volume: 5.5 FT³ 0.15 MT³ A, B, C, H, M, N, S 24 officestogocanada.com

SEATING CRAFT C CRAFT Craft is a modular lounge seating series that is easy to configure, durable and ideal for open spaces. Modular non-handed components, can be reconfigured to suit your space. Curve-120 degree units can create 3-way and collaborative pod configurations. Cushions are fully upholstered and mounted on 1.5 high nylon glides. Can be upholstered in all Global grade 1 seating textiles and in (see page 119). For dual wheel carpet casters, please specify (C107). Add $35. (C107R). Add $50. ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. Sample layout Two square units, three rectangle units, three curve-120 degree units 3-way layout Three curve-120 degree units Collaborative pod layout Six curve-120 degree units MVL13010 500 IN 43.5 27.5 17.5 - - - - - Curve-120 Degree Unit MM 1105 699 445 - - - - - Unit weight: 37 LB 16.8 KG Carton weight: 49 LB 22.23 KG Carton volume: 13.25 FT³ 0.37 MT³ MVL13011 400 IN 40 20 17.5 - - - - - Rectangle Unit MM 1016 508 445 - - - - - Unit weight: 37 LB 16.8 KG Carton weight: 47 LB 21.32 KG Carton volume: 9.5 FT³ 0.26 MT³ MVL13012 300 IN 20 20 17.5 - - - - - Square Unit MM 508 508 445 - - - - - Unit weight: 22 LB 10 KG Carton weight: 28 LB 12.7 KG Carton volume: 5.25 FT³ 0.14 MT³ officestogocanada.com 25

D DAKOTA / DANIO SEATING DAKOTA Wood frame guest chair Four-legged, slat back design. Wood frame is available in Cordovan color only. Seat is fully upholstered in Black Luxhide bonded leather. Shipped knocked down (KD) - some assembly required. model OTG11820B OTG11820B 347 IN 23 23 32.5 22 18.5 19 19 14 Wood Frame Guest Chair MM 584 584 826 559 470 483 483 356 Unit weight: 19 LB 8.6 KG Carton weight: 28 LB 12.7 KG Carton volume: 4.5 FT³ 0.12 MT³ M, N DANIO model MVL2720 model MVL2725 Canadian made task chairs. Hinged auto-adjust back with scuff resistant outer shroud. Thick foam and decorative stitch details. Standard with height adjustable T-arms with durable self-skinned urethane (SSU) armcaps (except armless models). Drafting chair is equipped with a height adjustable Chrome footrest. Dual wheel carpet casters (C65) are standard. MVL2724 and MVL2725 seaing surfaces can be upholstered in, in various colors (see page 119). MVL2720, MVL2721 and MVL2723 can be upholstered in all Global grade 1 seating textiles (see page 119). Height adjustable back. Seat depth adjustment. (C65R). Add $16/set. MVL2720 196 IN 18.5 22.5 34 18.5 16.5-18 16-21 17 16-17.5 Armless Task MM 470 572 864 470 419-457 406-533 432 406-445 Unit weight: 21 LB 9.5 KG Carton weight: 24 LB 10.89 KG Carton volume: 4.9 FT³ 0.13 MT³ C, D, E, M, N MVL2721 268 IN 24 22.5 34 18.5 16.5-18 16-21 17 16-17.5 Task w/arms MM 610 572 864 470 419-457 406-533 432 406-445 Unit weight: 33 LB 15 KG Carton weight: 36 LB 16.33 KG Carton volume: 5.75 FT³ 0.16 MT³ C, D, E, H, M, N 26 officestogocanada.com

SEATING DANIO D MVL2723 343 IN 24 22.5 43 18.5 16.5-18 23-33 16.5 16-17.5 Armless Drafting Task MM 610 572 1092 470 419-457 584-838 419 406-445 Unit weight: 33 LB 15 KG Carton weight: 37 LB 16.78 KG Carton volume: 6.75 FT³ 0.19 MT³ C, D, E, M, N MVL2724 234 IN 18.5 22.5 34 18.5 16.5-18 16-21 17 16-17.5 Armless Task MM 470 572 864 470 419-457 406-533 432 406-445 Unit weight: 21 LB 9.5 KG Carton weight: 24 LB 10.89 KG Carton volume: 4.9 FT³ 0.13 MT³ C, D, E, M, N MVL2725 305 IN 24 22.5 34 18.5 16.5-18 16-21 17 16-17.5 Task w/arms MM 610 572 864 470 419-457 406-533 432 406-445 Unit weight: 27 LB 12.3 KG Carton weight: 30 LB 13.61 KG Carton volume: 5.5 FT³ 0.15 MT³ C, D, E, H, M, N MVL2784 84 IN 3 10 12 - - - - - Height Adjustable T-Arms - 1 pair MM 76 254 305 - - - - - Unit weight: 8 LB 3.6 KG Carton weight: 10 LB 4.54 KG Carton volume: 1.3 FT³ 0.03 MT³ 1 pair per carton (pricing is for the pair, specifications are for one arm) officestogocanada.com 27

D DASH / DORI SEATING DASH Multi-purpose guest/occasional chair. Durable welded four-legged steel frame. Black mesh back with Black air mesh fabric seat. Nylon armcaps. Generous proportions. Shipped knocked down (KD) - easy to assemble. model OTG11760B OTG11760B 236 IN 23.5 23.5 34 19.5 17.5 17.5 19 16.5 Guest Chair, Mesh Back and Uph Seat MM 597 597 864 495 445 445 483 419 Unit weight: 21 LB 9.5 KG Carton weight: 26 LB 11.79 KG Carton volume: 3.9 FT³ 0.11 MT³ M, N DORI Multi-purpose stacking chairs. Strong welded steel frame in Chrome finish. Durable and easy to clean polypropylene back and seat. Available in Black only. Armchair has fiberglass reinforced polypropylene arms. Stackable up to 5 high on floor. Shipped fully assembled. model OTG1210BK OTG1210BK 156 IN 21.5 21 31.5 16.5 16 17.5 17.5 14.5 Stacking Armchair Stacks 5 high. MM 546 533 800 419 406 445 445 368 Unit weight: 11 LB 5 KG Carton weight: 12.5 LB 5.67 KG Carton volume: 12 FT³ 0.33 MT³ 4 per carton (pricing and specifications are for one chair) OTG1211BK 138 IN 18 21 31.5 16.5 16 17.5 17.5 14.5 Armless Stacking Chair Stacks 5 high. MM 457 533 800 419 406 445 445 368 Unit weight: 9 LB 4.1 KG Carton weight: 10 LB 4.54 KG Carton volume: 10.5 FT³ 0.29 MT³ 4 per carton (pricing and specifications are for one chair) 28 officestogocanada.com

SEATING FORMAT F FORMAT model MVL3191F model MVL3192F Synchro-tilter chairs with mesh back and upholstered seat. Canadian made. Standard with height and width adjustable arms with soft self-skinned urethane (SSU) armcaps that slide forward and backward. Dual wheel carpet casters (C1) are standard. Air flow mesh back is available in Black only. MVL3191 and MVL3192 seating surface can be upholstered in, in various colors (see page 119). MVL3191F and MVL3192F seat can be upholstered in all Global grade 1 seating textiles (see page 119). MVL3192 and MVL3192F feature an adjustable headrest which tilts and moves up and down to fit comfortably into the curve of the neck. Synchro tilt with upright position tilt lock. Tilt tension adjustment. Ratchet back height and headrest adjustment. (C9R). Add $16/set. MVL3191 495 MVL3191F 495 IN 24.5 23 43 19.5 17.5 16-21 17.5 23-25.5 High Back Synchro-Tilter, Mesh Back and Uph Seat MM 622 584 1092 495 445 406-533 445 584-648 Unit weight: 43 LB 19.5 KG Carton weight: 54 LB 24.49 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N, Q MVL3192 550 MVL3192F 550 IN 24.5 23 50.5 19.5 17.5 16-21 17.5 30-32.5 High Back Synchro-Tilter w/headrest, Mesh Back and Uph Seat MM 622 584 1283 495 445 406-533 445 762-826 Unit weight: 45 LB 20.5 KG Carton weight: 56 LB 25.4 KG Carton volume: 11 FT³ 0.31 MT³ A, B, C, D, H, L, M, N, Q MVL3196 56 IN 11.25 4.5 9 - - - - - Headrest for Format Chairs Easily attaches to MVL3191. MM 286 114 229 - - - - - Unit weight: 1 LB 0.5 KG Carton weight: 2 LB 0.91 KG Available in Black mesh only. Carton volume: 0.5 FT³ 0.01 MT³ officestogocanada.com 29

F FULL-TIME SEATING FULL-TIME model MVL2900 Canadian made, ergonomic seating. Extra thick seat foam and contoured back. Standard with height and width adjustable arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. Can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Multi-tilter with infinite position tilt lock. Infinite position back and seat angle adjustments, including forward tilt. Back height adjustment. (C65R). Add $16/set. For optional sliding seat depth adjustment, please specify (MD). Add $26. MVL2900 455 IN 24.5 25 41 19.5 19 17.5-21.5 20 20-22 Medium Back Multi-Tilter MM 622 635 1041 495 483 445-546 508 508-559 Unit weight: 50 LB 22.7 KG Carton weight: 56 LB 25.4 KG Carton volume: 9.75 FT³ 0.27 MT³ A, B, C, D, F, G, H, M, N, Q 30 officestogocanada.com

SEATING GENNEX G GENNEX model OTG11340 model OTG11341 Multi-purpose guest/nesting chairs feature a flip up seat allowing chairs to stack horizontally. Durable Black steel frame. Black mesh back. Models with arms or without arms are available. Armchair features Black polyurethane armcaps. Dual wheel carpet casters are standard. Seat can be upholstered in all Global grade 1 seating textiles or in (see page 119). (C9R). Add $61/set. OTG11340 399 IN 25.5 22 33 17.5 16.5 20.5 17 15 Nesting Guest Armchair w/casters, Mesh Back and Uph Seat MM 648 559 838 445 419 521 432 381 Unit weight: 24 LB 10.9 KG Carton weight: 29 LB 13.15 KG Carton volume: 15.75 FT³ 0.44 MT³ M, N 2 per carton OTG11341 359 IN 22 22 33 17.5 16.5 20.5 17 15 Armless Nesting Guest Chair w/casters, Mesh Back and Uph Seat MM 559 559 838 445 419 521 432 381 Unit weight: 21 LB 9.5 KG Carton weight: 25.5 LB 11.57 KG Carton volume: 13.25 FT³ 0.37 MT³ M, N 2 per carton officestogocanada.com 31

G GEO GEO model OTG11640B Value priced, quality mesh seating. Scuff resistant arched base. Standard with height adjustable arms with durable self-skinned urethane (SSU) armcaps (except armless and tilter chairs). Tilter chair features fixed loop style polypropylene arms. Dual wheel carpet casters (C65) are standard. All models have a Black mesh back. OTG11636B, OTG11641B, OTG11642B and OTG11678B: Seat is upholstered in Black mesh fabric (MS20). OTG11640B seating surface is upholstered in Black (PU30/BL20). SEATING Tilter chair - Center tilt with upright position tilt lock. - Tilt tension adjustment. - Pneumatic seat height adjustment. Synchro-tilter chair - Synchro tilt with upright position tilt lock. - Tilt tension adjustment. - Pneumatic seat height adjustment. Task chair - Task mechanism. - Pneumatic seat height adjustment. Drafting chair - Task mechanism. - Height adjustable Chrome footrest. - Pneumatic seat height adjustment.. (C65R). Add $76/set. OTG11636B 296 Black mesh fabric IN 22 21 38 18.5 16.5 16.5-20.5 17.5 19 Low Back Tilter, Mesh Back and Uph Seat MM 559 533 965 470 419 419-521 445 483 Unit weight: 26 LB 11.8 KG Carton weight: 30 LB 13.61 KG Carton volume: 3.75 FT³ 0.1 MT³ A, B, C, M, N, S OTG11641B 463 Black mesh fabric IN 25 23 43 20 17.5 16-20 18 25 High Back Synchro-Tilter, Mesh Back and Uph Seat MM 635 584 1092 508 445 406-508 457 635 Unit weight: 38 LB 17.3 KG Carton weight: 43 LB 19.5 KG Carton volume: 4.75 FT³ 0.13 MT³ A, B, C, H, L, M, N OTG11642B 250 Black mesh fabric IN 19 20 37 19 17 15.5-20.5 17 19 Low Back Armless Task, Mesh Back and Uph Seat MM 483 508 940 483 432 394-521 432 483 Unit weight: 25 LB 11.4 KG Carton weight: 30 LB 13.61 KG Carton volume: 3.75 FT³ 0.1 MT³ C, M, N OTG11678B 457 Black mesh fabric IN 25.5 22 46 19 17 22-32 17.5 20 Low Back Drafting Task, Mesh Back and Uph Seat MM 648 559 1168 483 432 559-813 445 508 Unit weight: 37 LB 16.8 KG Carton weight: 42 LB 19.05 KG Carton volume: 6 FT³ 0.16 MT³ C, H, M, N 32 officestogocanada.com

SEATING GEO / GRANBY G MVL2810 84 IN 3 10 12 - - - - - Height Adjustable Arms for OTG11642B - 1 pair MM 76 254 305 - - - - - Unit weight: 8 LB 3.6 KG Carton weight: 10 LB 4.54 KG Carton volume: 1.3 FT³ 0.03 MT³ 1 pair per carton (pricing is for the pair, specifications are for one arm) GRANBY Mesh back synchro-tilter chair. Polished aluminum base, Black frame and Chrome accents. Standard with height adjustable arms with durable self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C1) are standard. Air-flow Black mesh back. Seat is upholstered in Black Quilt (QL10). Synchro tilt with multi-position tilt lock. Tilt tension adjustment. Height adjustable lumbar support. (C9R). Add $76/set. model OTG10904 OTG10904 498 Black Quilt IN 24 24 37.5 19 19 17-20 18.5 18.5 High Back Synchro-Tilter MM 610 610 953 483 483 432-508 470 470 Unit weight: 36 LB 16.4 KG Carton weight: 40 LB 18.14 KG Carton volume: 4.5 FT³ 0.12 MT³ A, B, C, D, H, L, M, N officestogocanada.com 33

H HARVEST / HUMBER SEATING HARVEST model MVL2705 Wood frame guest chairs with fully upholstered cushions. Canadian made. MVL2705 seating surfaces can be upholstered in, in various colors (see page 119). MVL2705F can be upholstered in all Global grade 1 seating textiles (see page 119). Wood frame is available in three finishes: Dark Cherry (DCM), Mahogany (EMM) and Natural Cherry (NCM). Shipped fully assembled. MVL2705 433 MVL2705F 433 IN 22 23 35.5 19.5 17 17.5 19.5 17.5 Guest Armchair MM 559 584 902 495 432 445 495 445 Unit weight: 21 LB 9.5 KG Carton weight: 25 LB 11.34 KG Carton volume: 11.75 FT³ 0.33 MT³ M, N HUMBER model MVL2788 High back management chair. Canadian made. Double stitch details on seat and back. Comfortable and durable fixed loop polyurethane arms. Dual wheel carpet casters (C65) are standard. MVL2788 seating surfaces can be upholstered in polyurethane mock leather, in various colors (see page 119). MVL2788F can be upholstered in all Global grade 1 seating textiles (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. MVL2788 445 Polyurethane mock leather MVL2788F 445 IN 25.5 27.5 42 21.5 19 16-21 21.5 24 High Back Tilter MM 648 699 1067 546 483 406-533 546 610 Unit weight: 38 LB 17.3 KG Carton weight: 44 LB 19.96 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, M, N, S 34 officestogocanada.com

SEATING IBEX I IBEX model MVL2801 model MVL2807F model MVL2814F model MVL2809F Ergonomic mesh seating designed to promote good posture and provide maximum comfort. Designed by Zooey Ch Canadian made. Available with four different mechanism options: synchro-tilter, multi-tilter, tilter and task. Drafting chairs with task mechanism only. Standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps (except armless and guest chairs). Dual wheel carpet casters (C1) are standard (except four-legged guest chairs). Guest chairs have polymer armcaps (except armless models), a welded steel wall saver frame and are shipped fully assembled. Mesh back and mesh seat models can only be upholstered in Black mesh (MS69). Mesh back and upholstered seat models: Mesh back is available in Black (MS69) only and seating surface can be upholstered in Luxhide bonded leather (various colors) or in all Global grade 1 seating textiles (see page 119). For a fabric seat specify models ending in F. (C9R). Add $16/set. For optional sliding seat depth adjustment on multi-tilter chairs, please specify (MD). Add $26. Synchro-tilter chairs - Synchro tilt with multi-position tilt lock. - Tilt tension adjustment. - Adjustable lumbar support. - Pneumatic seat height adjustment. Multi-tilter chairs - Infinite position tilt lock. - Tilt tension adjustment. - Infinite back and seat angle adjustment. - Adjustable lumbar support. - Pneumatic seat height adjustment. Tilter chairs - Center tilt with upright position tilt lock. - Tilt tension adjustment. - Seat depth adjustment. - Adjustable lumbar support. - Pneumatic seat height adjustment. Task chairs - Seat depth adjustment. - Adjustable lumbar support. - Pneumatic seat height adjustment. Drafting chairs - Task mechanism. - Adjustable lumbar support. - Pneumatic seat height adjustment. - Height adjustable Chrome footrest. ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. MVL2801 512 MVL2801F 512 IN 26 26.5 39.5 20 18.5 16.5-21.5 19.5 20.5 Synchro-Tilter, Mesh Back and Uph Seat MM 660 673 1003 508 470 419-546 495 521 Unit weight: 42 LB 19.1 KG Carton weight: 51 LB 23.13 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N MVL2803 560 MVL2803F 560 IN 26 27 39.5 20 18.5 17.5-22.5 19.5 20 Multi-Tilter, Mesh Back and Uph Seat MM 660 686 1003 508 470 445-572 495 508 Unit weight: 47 LB 21.4 KG Carton weight: 56 LB 25.4 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, F, G, H, M, N, S officestogocanada.com 35

I IBEX SEATING MVL2804 490 MVL2804F 490 IN 26 26.5 38.5 20 18.5 16.5-21.5 19.5 20.5 Tilter, Mesh Back and Uph Seat MM 660 673 978 508 470 419-546 495 521 Unit weight: 40 LB 18.2 KG Carton weight: 49 LB 22.23 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, M, N, S MVL2806 446 MVL2806F 446 IN 26 26.5 37 20 18.5 16-21 19.5 20.5 Task, Mesh Back and Uph Seat MM 660 673 940 508 470 406-533 495 521 Unit weight: 32 LB 14.5 KG Carton weight: 41 LB 18.6 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M, N MVL2807 511 MVL2807F 511 IN 20 26.5 48 20 18.5 23-33 19.5 20.5 Armless Drafting, Mesh Back and Uph Seat MM 508 673 1219 508 470 584-838 495 521 Unit weight: 31 LB 14.1 KG Carton weight: 40 LB 18.14 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M, N MVL2808 597 MVL2808F 597 IN 26 26.5 48 20 18.5 23-33 19.5 20.5 Drafting w/arms, Mesh Back and Uph Seat MM 660 673 1219 508 470 584-838 495 521 Unit weight: 37 LB 16.8 KG Carton weight: 46 LB 20.87 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M, N MVL2809 377 MVL2809F 377 IN 25.25 24 34.5 19.5 18 17.5 19 17 Guest Chair, Mesh Back and Uph Seat Stacks 5 high. MM 641 610 876 495 457 445 483 432 Unit weight: 20 LB 9.1 KG Carton weight: 26 LB 11.79 KG Carton volume: 13.5 FT³ 0.38 MT³ M, N 36 officestogocanada.com

SEATING IBEX I MVL2809C 456 MVL2809CF 456 IN 25.25 24 34.5 19.5 18 17.5 19 17 Guest Chair w/casters, Mesh Back and Uph Seat MM 641 610 876 495 457 445 483 432 Unit weight: 20 LB 9.1 KG Carton weight: 26 LB 11.79 KG Carton volume: 13.5 FT³ 0.38 MT³ M, N MVL2811 582 MVL2811F 582 IN 26 26.5 39.5 20 18.5 16.5-21.5 19.5 20.5 Synchro-Tilter, Uph Back and Seat MM 660 673 1003 508 470 419-546 495 521 Unit weight: 42 LB 19.1 KG Carton weight: 51 LB 23.13 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N MVL2813 630 MVL2813F 630 IN 26 27 39.5 20 18.5 17.5-22.5 19.5 20 Multi-Tilter, Uph Back and Seat MM 660 686 1003 508 470 445-572 495 508 Unit weight: 47 LB 21.4 KG Carton weight: 56 LB 25.4 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, F, G, H, M, N, S MVL2814 559 MVL2814F 559 IN 26 26.5 38.5 20 18.5 16.5-21.5 19.5 20.5 Tilter, Uph Back and Seat MM 660 673 978 508 470 419-546 495 521 Unit weight: 40 LB 18.2 KG Carton weight: 49 LB 22.23 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, M, N, S MVL2816 516 MVL2816F 516 IN 26 26.5 37 20 18.5 16-21 19.5 20.5 Task, Uph Back and Seat MM 660 673 940 508 470 406-533 495 521 Unit weight: 32 LB 14.5 KG Carton weight: 41 LB 18.6 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M, N officestogocanada.com 37

I IBEX SEATING MVL2817 580 MVL2817F 580 IN 20 26.5 48 20 18.5 23-33 19.5 20.5 Armless Drafting, Uph Back and Seat MM 508 673 1219 508 470 584-838 495 521 Unit weight: 31 LB 14.1 KG Carton weight: 40 LB 18.14 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M, N MVL2818 665 MVL2818F 665 IN 26 26.5 48 20 18.5 23-33 19.5 20.5 Drafting w/arms, Uph Back and Seat MM 660 673 1219 508 470 584-838 495 521 Unit weight: 37 LB 16.8 KG Carton weight: 46 LB 20.87 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M, N MVL2819 443 MVL2819F 443 Stacks 5 high. Back exterior upholstered IN 25.25 24 34.5 19.5 18 17.5 19 17 Guest Chair, Uph Back and Seat in Jenny, Ebony (JN02). MM 641 610 876 495 457 445 483 432 Unit weight: 20 LB 9.1 KG Carton weight: 26 LB 11.79 KG Carton volume: 13.5 FT³ 0.38 MT³ M, N MVL2819C 519 MVL2819CF 519 Back exterior upholstered IN 25.25 24 34.5 19.5 18 17.5 19 17 Guest Chair w/casters, Uph Back and Seat in Jenny, Ebony (JN02). MM 641 610 876 495 457 445 483 432 Unit weight: 20 LB 9.1 KG Carton weight: 26 LB 11.79 KG Carton volume: 13.5 FT³ 0.38 MT³ M, N MVL2821 610 Black mesh IN 26 26.5 39.5 20 18.5 16.5-21.5 19.5 20.5 Synchro-Tilter, Mesh Back and Seat MM 660 673 1003 508 470 419-546 495 521 Unit weight: 42 LB 19.1 KG Carton weight: 51 LB 23.13 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M 38 officestogocanada.com

IBEX I SEATING MVL2823 Black mesh 657 OVERALL DIMENSIONS W D H IN 26 27 Multi-Tilter, Mesh Back and Seat MM 660 686 Unit weight: 47 LB 21.4 KG Carton weight: 56 LB 25.4 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, F, G, H, M, S MVL2824 Black mesh 26 26.5 38.5 978 OVERALL DIMENSIONS W D H 20 508 18.5 470 16.5-21.5 419-546 BACK DIMENSIONS W H 19.5 495 20.5 521 26 26.5 37 SEAT DIMENSIONS W D H 20 508 18.5 470 16-21 406-533 BACK DIMENSIONS W H 19.5 495 20.5 521 609 OVERALL DIMENSIONS W D H IN 20 26.5 48 Armless Drafting, Mesh Back and Seat MM 508 673 1219 Unit weight: 31 LB 14.1 KG Carton weight: 40 LB 18.14 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M SEAT DIMENSIONS W D H 20 508 18.5 470 23-33 584-838 BACK DIMENSIONS W H 19.5 495 20.5 521 692 OVERALL DIMENSIONS W D H IN 26 26.5 48 Drafting w/arms, Mesh Back and Seat MM 660 673 1219 Unit weight: 37 LB 16.8 KG Carton weight: 46 LB 20.87 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M officestogocanada.com SEAT DIMENSIONS W D H 545 IN MVL2828 Black mesh 20 508 Task, Mesh Back and Seat MM 660 673 940 Unit weight: 32 LB 14.5 KG Carton weight: 41 LB 18.6 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M 19.5 495 MVL2827 Black mesh 17.5-22.5 445-572 OVERALL DIMENSIONS W D H IN 18.5 470 587 Tilter, Mesh Back and Seat MM 660 673 Unit weight: 40 LB 18.2 KG Carton weight: 49 LB 22.23 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, M, S MVL2826 Black mesh 20 508 BACK DIMENSIONS W H 39.5 1003 SEAT DIMENSIONS W D H SEAT DIMENSIONS W D H 20 508 18.5 470 23-33 584-838 BACK DIMENSIONS W H 19.5 495 20.5 521 39

I IBEX SEATING MVL2831 351 MVL2831F 351 IN 20 24 34.5 19.5 18 17.5 19 17 Armless Guest Chair, Mesh Back and Uph Seat Stacks 5 high. MM 508 610 876 495 457 445 483 432 Unit weight: 19 LB 8.6 KG Carton weight: 25 LB 11.34 KG Carton volume: 11.75 FT³ 0.33 MT³ M, N MVL2831C 431 MVL2831CF 431 IN 20 24 34.5 19.5 18 17.5 19 17 Armless Guest Chair w/casters, Mesh Back and Uph Seat MM 508 610 876 495 457 445 483 432 Unit weight: 19 LB 8.6 KG Carton weight: 25 LB 11.34 KG Carton volume: 11.75 FT³ 0.33 MT³ M, N MVL2832 417 MVL2832F 417 Stacks 5 high. Back exterior upholstered IN 20 24 34.5 19.5 18 17.5 19 17 Armless Guest Chair, Uph Back and Seat in Jenny, Ebony (JN02). MM 508 610 876 495 457 445 483 432 Unit weight: 20 LB 9.1 KG Carton weight: 26 LB 11.79 KG Carton volume: 11.75 FT³ 0.33 MT³ M, N MVL2832C 492 MVL2832CF 492 Back exterior upholstered IN 20 24 34.5 19.5 18 17.5 19 17 Armless Guest Chair w/casters, Uph Back and Seat in Jenny, Ebony (JN02). MM 508 610 876 495 457 445 483 432 Unit weight: 20 LB 9.1 KG Carton weight: 26 LB 11.79 KG Carton volume: 11.75 FT³ 0.33 MT³ M, N 40 officestogocanada.com

SEATING JAVA J JAVA Tilter chair with durable rear shroud. Flared fixed loop arms. Black frame and Black spider base. Dual wheel carpet casters (C65) are standard. Only available in Black mesh fabric seat (MS20) with contrasting Grey mesh back. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG10902 OTG10902 287 IN 24 23 39 19.5 17 17-21 18 20 High Back Tilter MM 610 584 991 495 432 432-533 457 508 Unit weight: 23 LB 10.5 KG Carton weight: 28 LB 12.7 KG Carton volume: 3.4 FT³ 0.09 MT³ A, B, C, M, N, S officestogocanada.com 41

K KAZAN / KENO SEATING KAZAN Unique design by Zooey Chu. Comfortable multi-segmented cushions with deep padding. Double needle decorative stitch details. Fully upholstered arms. Dual wheel carpet casters (C65) are standard Seating surfaces are upholstered in Black. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11670B OTG11670B 561 IN 25.5 29.5 46 21.5 20 17-21 17.5 27.5 High Back Tilter MM 648 749 1168 546 508 432-533 445 699 Unit weight: 54 LB 24.5 KG Carton weight: 60 LB 27.22 KG Carton volume: 8 FT³ 0.22 MT³ A, B, C, M, N, S KENO model OTG11657B Mesh back manager s tilter chair. Contoured back with internal lumbar strap provides excellent support. Chrome steel base with dual wheel carpet casters (C65) is standard. Chrome steel arms with removable armcaps. Only available in a Black mesh fabric seat (MS20) with a Black mesh back. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. OTG11657B 473 IN 24 23.5 41 20 17.5 16.5-20.5 19 21.5 Tilter, Mesh Back MM 610 597 1041 508 445 419-521 483 546 Unit weight: 35 LB 15.9 KG Carton weight: 40 LB 18.14 KG Carton volume: 3.9 FT³ 0.11 MT³ A, B, C, M, N, S 42 officestogocanada.com

SEATING KYLIE K KYLIE model MVL11786 Great for the hospitality market. Fully upholstered chair. Canadian made. Low rise closed upholstered arms conveniently fit below most working surfaces. Chrome steel base with dual wheel carpet casters (C65) is standard. MVL11786 seating surfaces can be upholstered in, in various colors (see page 119). MVL11786F can be upholstered in all Global grade 1 seating textiles (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. MVL11786 683 MVL11786F 683 IN 22.5 22 42.5 16 17 18-23 21 22.5 Medium Back Tilter MM 572 559 1080 406 432 457-584 533 572 Unit weight: 35 LB 15.9 KG Carton weight: 42 LB 19.05 KG Carton volume: 6.75 FT³ 0.19 MT³ A, B, C, M, N, S officestogocanada.com 43

L LITE-LIFT SEATING LITE-LIFT model OTG11674 Multi-purpose folding chair. Lightweight, durable, portable and easy to clean. Folds flat for compact storage. Molded plastic seat and back in Oyster Grey only. Strong steel frame in Charcoal color with epoxy coating. Stackable up to 25 high on dolly (MVL2776). Shipped fully assembled. For complementary Lite-Lift folding tables, see page 101. OTG11674 369 IN 19 22 33.5 16 17 17.5 18.5 17 Armless Folding Chairs - Set of 4 MM 483 559 851 406 432 445 470 432 Unit weight: 12 LB 5.5 KG Carton weight: 54 LB 24.49 KG Carton volume: 5.23 FT³ 0.14 MT³ 1 carton (pricing is for the set, specifications are for one chair) MVL2776 383 IN 18.5 43.5 74.75 - - - - - Dolly Stacks OTG11674 chairs MM 470 1105 1899 - - - - - Unit weight: 43 LB 19.5 KG horizontally, up to 25 high. Carton weight: 48 LB 21.77 KG Carton volume: 3.08 FT³ 0.08 MT³ 44 officestogocanada.com

SEATING LOCATE L LOCATE Sample layout Five single seat units, two end arms, one table bridge and one corner table Sample layout Five single bench units, one table bridge and one corner table Locate is a modular seating series that is easy to configure, durable and ideal for linear and corner spaces. Modular non-handed linking components, can be reconfigured to suit your space. Cushions are fully upholstered and mounted on welded steel sled bases. Can be upholstered in all Global grade 1 seating textiles and in (see page 119). Tables are made from 45 lb. density particle board covered with thermally fused laminate on both sides. Tables are available in all Ionic finishes (see page 120). Most units can be ganged together with connecting brackets. Connecting brackets are not included with all models (see model description for details). Welded steel sled base and posts are available in Black (BLK) or Tungsten (TUN) finish, please specify. No upcharge. For Chrome finish frame on single seats, please specify (CHM). Add $53. For Chrome finish frame on tables or benches, please specify (CHM). Add $32. MVL5001NA 492 IN 25 29 30.5 25 19 17.5 25 13 Single Seat Connecting brackets MM 635 737 775 635 483 445 635 330 Unit weight: 29 LB 13.2 KG not included. Carton weight: 39 LB 17.69 KG Carton volume: 16.5 FT³ 0.46 MT³ MVL5002 156 Can be used on left or right side. IN 3 18.5 9 - - - - - End Arm (Single) MM 76 470 229 - - - - - Unit weight: 7 LB 3.2 KG Connecting brackets included. Carton weight: 9 LB 4.08 KG Dimensions do not include Carton volume: 1.1 FT³ 0.03 MT³ the connecting brackets. MVL5002C 156 For use in between single seat and bench units. IN 3 18.5 9 - - - - - Center Arm (Single) MM 76 470 229 - - - - - Unit weight: 7 LB 3.2 KG Connecting brackets included. Carton weight: 10 LB 4.54 KG Dimensions do not include Carton volume: 1.6 FT³ 0.04 MT³ the connecting brackets. MVL5003 188 Connects single seat and bench units. IN 35 22.5 4 - - - - - Cushion Bridge MM 889 572 102 - - - - - Unit weight: 14 LB 6.4 KG Connecting brackets included. Carton weight: 18 LB 8.16 KG Dimensions do not include Carton volume: 2.6 FT³ 0.07 MT³ the connecting brackets. officestogocanada.com 45

L LOCATE SEATING MVL5004 314 IN 25 23 17.5 25 23 17.5 - - Single Bench Connecting brackets MM 635 584 445 635 584 445 - - Unit weight: 19 LB 8.6 KG not included. Carton weight: 25 LB 11.34 KG Carton volume: 8.5 FT³ 0.24 MT³ MVL5005 177 IN 24 21 1 - - - - - Table Bridge - 24 Connecting brackets MM 610 533 25 - - - - - Unit weight: 18 LB 8.2 KG included. Carton weight: 22 LB 9.98 KG Carton volume: 0.6 FT³ 0.01 MT³ MVL5006 156 IN 14 21 1 - - - - - Table Bridge - 14 Connecting brackets MM 356 533 25 - - - - - Unit weight: 14 LB 6.4 KG included. Carton weight: 18 LB 8.16 KG Carton volume: 0.4 FT³ 0.01 MT³ MVL5007 261 IN 24 21 15 - - - - - Single Table - 24 Connecting brackets MM 610 533 381 - - - - - Unit weight: 19 LB 8.6 KG not included. Carton weight: 26 LB 11.79 KG Carton volume: 8.5 FT³ 0.24 MT³ MVL5008 292 IN 21 21 14.5 - - - - - Corner Table - Square Monopost and connecting MM 533 533 368 - - - - - Unit weight: 20 LB 9.1 KG brackets included. Carton weight: 24 LB 10.89 KG Dimensions do not include Carton volume: 1.7 FT³ 0.04 MT³ the connecting brackets. MVL5009 292 IN 21 21 14.5 - - - - - Corner Table - Quarter Round Monopost and connecting MM 533 533 368 - - - - - Unit weight: 18 LB 8.2 KG brackets included. Carton weight: 22 LB 9.98 KG Dimensions do not include Carton volume: 1.7 FT³ 0.04 MT³ the connecting brackets. 46 officestogocanada.com

SEATING LOCATE L MVL5011 37 IN 2.25 10 0.12 - - - - - Connecting Brackets (pair) Joins single seat and MM 57 254 3 - - - - - Unit weight: 1.5 LB 0.7 KG bench units. Carton weight: 3.5 LB 1.59 KG Carton volume: 0.1 FT³ 0.003 MT³ officestogocanada.com 47

M M-TASK SEATING M-TASK model MVL2911 model MVL2914 Full function ergonomic seating. Canadian made. Slim profile with highly contoured back and waterfall seat front. Available with two different mechanism options: synchro-tilter and multi-tilter. Standard with height and width adjustable T-arms with durable self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C1) are standard. MVL2912, MVL2912F, MVL2914 and MVL2914F feature a height and angle adjustable headrest. Seating surfaces can be upholstered in Luxhide bonded leather (various colors) or in all Global grade 1 seating textiles (see page 119). For a fabric seat specify models ending in F. Synchro-tilter chairs - Synchro tilt with multi-position tilt lock. - Tilt tension adjustment. - Ratchet back height adjustment. - Pneumatic seat height adjustment. Multi-tilter chairs - Center tilt with infinite position tilt lock. - Tilt tension adjustment. - Independent back and seat angle adjustment. - Forward seat angle adjustment. - Ratchet back height adjustment. - Sliding seat depth adjustment. - Pneumatic seat height adjustment. (C9R). Add $16/set. ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. MVL2911 566 MVL2911F 566 IN 25 23 40.5 20.5 17.5 16.5-21.5 19 22 High Back Synchro-Tilter MM 635 584 1029 521 445 419-546 483 559 Unit weight: 44 LB 20 KG Carton weight: 56 LB 25.4 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N, Q MVL2912 647 MVL2912F 647 IN 25 23 48 20.5 17.5 16.5-21.5 19 29 Executive Back Synchro-Tilter w/adj. Headrest MM 635 584 1219 521 445 419-546 483 737 Unit weight: 49 LB 22.3 KG Carton weight: 62 LB 28.12 KG Carton volume: 11 FT³ 0.31 MT³ A, B, C, D, H, L, M, N, Q MVL2913 589 MVL2913F 589 IN 25 24 41 20.5 18 17-22 19 22 High Back Multi-Tilter MM 635 610 1041 521 457 432-559 483 559 Unit weight: 50 LB 22.7 KG Carton weight: 62 LB 28.12 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, F, G, H, M, N, Q, S 48 officestogocanada.com

SEATING M-TASK / MINTO M MVL2914 671 MVL2914F 671 IN 25 24 48 20.5 18 17-22 19 29 Executive Back Multi-Tilter w/adj. Headrest MM 635 610 1219 521 457 432-559 483 737 Unit weight: 51 LB 23.2 KG Carton weight: 63 LB 28.58 KG Carton volume: 11 FT³ 0.31 MT³ A, B, C, D, E, F, G, H, M, N, Q, S MINTO model MVL2747 Multi-purpose stacking chairs. Canadian made. Fully upholstered seat and back. Four-legged round steel tube frame. Armchair has polypropylene armcaps. Stackable up to 5 high on floor or on optional dolly (MVL2749). Can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Shipped fully assembled. MVL2747 200 IN 23 22.5 32 18 17.5 18 17.5 13.5 Low Back Stacking Armchair Stacks 5 high. MM 584 572 813 457 445 457 445 343 Unit weight: 15 LB 6.8 KG Carton weight: 18 LB 8.16 KG Carton volume: 12.75 FT³ 0.36 MT³ M, N 2 per carton (pricing and specifications are for one chair) MVL2748 156 IN 19.5 22.5 32 18 17.5 18 17.5 13.5 Armless Low Back Stacking Chair Stacks 5 high. MM 495 572 813 457 445 457 445 343 Unit weight: 14 LB 6.4 KG Carton weight: 17 LB 7.71 KG Carton volume: 11.25 FT³ 0.31 MT³ M, N 2 per carton (pricing and specifications are for one chair) MVL2749 217 IN 23.25 24.75 12.25 - - - - - Dolly Black steel frame on 2 casters. MM 591 629 311 - - - - - Unit weight: 13 LB 5.9 KG Carton weight: 16 LB 7.26 KG Accommodates MVL2747 and RTA 1 Carton volume: 3.8 FT³ 0.1 MT³ MVL2748 chairs, up to 5 high. officestogocanada.com 49

M MVL FILE BUDDY MVL FILE BUDDY Swivel stool ideal for filing and any mobile desk. Five-legged injection molded base available in Black only Dual wheel carpet casters (C65) are standard. 13.5 diameter seat upholstered in Black vinyl (70). SEATING (C65R). Add $16/set. model MVL1105 MVL1105 222 IN 13.5 13.5 18.5 13.5-16.5-21.5 - - Swivel Stool - 5 Pneumatic, 20 Base MM 343 343 470 343-419-546 - - Unit weight: 11 LB 5 KG Carton weight: 14 LB 6.35 KG Ergonomic feature: RTA 1 Carton volume: 2.5 FT³ 0.07 MT³ C MVL1110 274 IN 13.5 13.5 27.5 13.5-22.5-32.5 - - Swivel Stool - 10 Pneumatic, 22 Base MM 343 343 699 343-572-826 - - Unit weight: 14 LB 6.4 KG Carton weight: 17 LB 7.71 KG Ergonomic feature: RTA 1 Carton volume: 2.9 FT³ 0.08 MT³ C 50 officestogocanada.com

SEATING NEMO Breathable striped mesh back. Standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps. Scuff resistant arched base. Dual wheel carpet casters (C1) are standard. Only available in Jenny, Ebony (JN02) with coordinating Black mesh back. Center tilt with upright position tilt lock. Tilt tension adjustment. NEMO N (C9R). Add $76/set. model OTG11921J OTG11921J 394 IN 25 23 39 20 17.5 17-21 19 20 Mesh Back Tilter MM 635 584 991 508 445 432-533 483 508 Unit weight: 33 LB 15 KG Carton weight: 40 LB 18.14 KG Carton volume: 4.25 FT³ 0.12 MT³ A, B, C, H, M, N, S officestogocanada.com 51

N NEWCASTLE NEWCASTLE A distinguished management and boardroom tilter chair. Fixed durable nylon arms with upholstered armcaps. Dual wheel carpet casters (C65) are standard. Seating surfaces are upholstered in Black. SEATING Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11782B OTG11782B 396 IN 25 26 46 21 18 18.5-22.5 21 24 High Back Tilter MM 635 660 1168 533 457 470-572 533 610 Unit weight: 34 LB 15.5 KG Carton weight: 40 LB 18.14 KG Carton volume: 5.75 FT³ 0.16 MT³ A, B, C, M, N, S 52 officestogocanada.com

SEATING OTTO Value task seating. Thick foam cushions and decorative stitch detail. Fully upholstered seat and back. Dual wheel carpet casters (C65) are standard. Only available in a Black mesh fabric (MS20). OTTO O (C65R). Add $76/set. model OTG11343B OTG11343B 229 IN 19 23 37 19 17 18-22 18 17 Task Chair MM 483 584 940 483 432 457-559 457 432 Unit weight: 25 LB 11.4 KG Carton weight: 30 LB 13.61 KG Carton volume: 3.5 FT³ 0.09 MT³ C, M, N OTG11344 84 IN 3 10 12 - - - - - Height Adjustable T-Arms - 1 pair MM 76 254 305 - - - - - Unit weight: 8 LB 3.6 KG Carton weight: 10 LB 4.54 KG Carton volume: 1.3 FT³ 0.03 MT³ 1 pair per carton (pricing is for the pair, specifications are for one arm) officestogocanada.com 53

O OVERTIME / OVERTIME 350 OVERTIME model MVL2756 Canadian made, full function ergonomic chair designed to promote good posture and provide comfort for long-term sitting. High comfort seat made from variable density seat foams and a memory foam top. Standard with height and width adjustable T-arms with durable self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. MVL2756 seating surfaces can be upholstered in, in various colors (see page 119). MVL2756F can be upholstered in all Global grade 1 seating textiles (see page 119). SEATING Multi-tilter mechanism with infinite position tilt lock. Infinite position back and seat angle adjustments, including forward tilt. Ratchet back height adjustment. (C65R). Add $16/set. For optional sliding seat depth adjustment, please specify (MD). Add $26. MVL2756 517 MVL2756F 517 IN 26 24.5 40 19.5 18 17-21 19 19-21.5 High Back Multi-Tilter MM 660 622 1016 495 457 432-533 483 483-546 Unit weight: 58 LB 26.4 KG Carton weight: 63 LB 28.58 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, F, G, H, M, N, Q, S OVERTIME 350 model MVL13040 Canadian made, specifically intended for users of above average height and/or weight, up to 350 lbs. Not intended for average size users. High comfort seat made from variable density seat foams and a memory foam top. Standard with height and width adjustable T-arms with sliding, rotating and lockable armcaps. Width adjustable arm extensions are standard. Dual wheel carpet casters (C65) are standard. MVL13040 seating surfaces can be upholstered in, in various colors (see page 119). MVL13040F can be upholstered in all Global grade 1 seating textiles (see page 119). Multi-tilter mechanism with infinite position tilt lock. Infinite position back and seat angle adjustments, including forward tilt. Ratchet back height adjustment. Seat depth adjustment. (C65R). Add $16/set. MVL13040 799 MVL13040F 799 IN 26 26 42 21 18-21 19-23 20.5 19.5-23 High Back Heavy Duty Multi-Tilter MM 660 660 1067 533 457-533 483-584 521 495-584 Unit weight: 62 LB 28.2 KG Carton weight: 68 LB 30.84 KG Carton volume: 14.75 FT³ 0.41 MT³ A, B, C, D, E, F, G, H, M, N, Q, R, S 54 officestogocanada.com

SEATING PACER / PACIFIC P PACER model OTG11685 Mesh back synchro-tilter chair. Unique back shroud and base design detailed with Tungsten accents. Standard with height adjustable T-arms with polyurethane armcaps. Dual wheel carpet casters (C65) are standard. Mesh back is available in Black only. Seats can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Synchro tilt with infinite position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. OTG11685 552 IN 25.5 24.5 41 20 19 16-20 19 22.5 High Back Synchro-Tilter, Mesh Back and Uph Seat MM 648 622 1041 508 483 406-508 483 572 Unit weight: 42 LB 19.1 KG Carton weight: 47 LB 21.32 KG Carton volume: 4.75 FT³ 0.13 MT³ A, B, C, H, L, M, N OTG11686 478 IN 25.5 24.5 36.5 20 19 16-20 19 18 Medium Back Synchro-Tilter, Mesh Back and Uph Seat MM 648 622 927 508 483 406-508 483 457 Unit weight: 40 LB 18.2 KG Carton weight: 44 LB 19.96 KG Carton volume: 4 FT³ 0.11 MT³ A, B, C, H, L, M, N PACIFIC High back management chair. Canadian made. Plush cushions and upholstered padded armcaps. Dual wheel carpet casters (C65) are standard. Seating surfaces are upholstered in Luxhide bonded leather, in various colors (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. model MVL11870 MVL11870 478 IN 25.5 28.5 44.5 21.5 18.5 16.5-21.5 21.5 25.5 High Back Tilter MM 648 724 1130 546 470 419-546 546 648 Unit weight: 41 LB 18.6 KG Carton weight: 47 LB 21.32 KG Carton volume: 9.5 FT³ 0.26 MT³ A, B, C, M, N, S officestogocanada.com 55

P PART-TIME SEATING PART-TIME model MVL2836F model MVL2847F Canadian made, value priced, general office seating. Available with two different mechanism options: task or posture task. Contoured cushions and waterfall seat edge. Standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps (except armless models). Dual wheel carpet casters (C65) are standard. Can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Task chairs - Infinite position back angle adjustment. - Seat depth adjustment. - Pneumatic seat height adjustment. Posture task chairs - Infinite position back angle adjustment. - Manual back height adjustment. - Pneumatic seat height adjustment. (C65R). Add $16/set. MVL2836F 247 IN 20.5 24.5 36.5 20.5 17-18 16.5-21.5 19 20 Armless Task MM 521 622 927 521 432-457 419-546 483 508 Unit weight: 27 LB 12.3 KG Carton weight: 33 LB 14.97 KG Carton volume: 6.5 FT³ 0.18 MT³ C, E, M, N MVL2837F 289 IN 20.5 24 37.5 20.5 17.5 16.5-21.5 19 16-20 Armless Posture Task MM 521 610 953 521 445 419-546 483 406-508 Unit weight: 31 LB 14.1 KG Carton weight: 37 LB 16.78 KG Carton volume: 6.5 FT³ 0.18 MT³ C, D, G, M, N MVL2846F 310 IN 26.5 24.5 36.5 20.5 17-18 16.5-21.5 19 20 Task w/arms MM 673 622 927 521 432-457 419-546 483 508 Unit weight: 33 LB 15 KG Carton weight: 39 LB 17.69 KG Carton volume: 7 FT³ 0.19 MT³ C, E, H, M, N MVL2847F 353 IN 26.5 24 37.5 20.5 17.5 16.5-21.5 19 16-20 Posture Task w/arms MM 673 610 953 521 445 419-546 483 406-508 Unit weight: 37 LB 16.8 KG Carton weight: 43 LB 19.5 KG Carton volume: 8.5 FT³ 0.24 MT³ C, D, G, H, M, N 56 officestogocanada.com

SEATING RETRO R RETRO Management and boardroom chair. Unique seat suspension and segmented cushions offer a very plush feel. Chrome arms with upholstered armrests. Chrome frame and base. Dual wheel carpet casters (C65) are standard. Seating surfaces are upholstered in Black. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11648B OTG11648B 602 IN 24.5 24.5 41 19 17.5 17-21 18 21.5 High Back Tilter MM 622 622 1041 483 445 432-533 457 546 Unit weight: 43 LB 19.5 KG Carton weight: 48 LB 21.77 KG Carton volume: 7.75 FT³ 0.21 MT³ A, B, C, M, N, S officestogocanada.com 57

S SAFARI / SIX 13 SEATING SAFARI model OTG13026 Mesh back tilter chair. Compact design suitable for average to petite size individuals. Contoured Black mesh back with lumbar strap provides excellent support. Fixed loop arms. Black base with dual wheel carpet casters (C1) is standard. Seat can be upholstered in all Global grade 1 seating textiles or in (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C9R). Add $76/set. OTG13026 320 IN 23 23.5 40 19 17 18.25-22.25 19 19 Medium Mesh Back Tilter MM 584 597 991 483 432 464-565 483 483 Unit weight: 27 LB 12.3 KG Carton weight: 32 LB 14.51 KG Carton volume: 4.5 FT³ 0.12 MT³ A, B, C, M, N, S SIX 13 A value priced multi-tilter chair with many ergonomic features. Standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. Upholstered in Black Quilt (QL10) only. Multi-Center tilt with infinite position tilt lock. Infinite position back and seat angle adjustments. Concealed ratchet back height adjustment. (C65R). Add $76/set. model OTG11613B OTG11613B 438 IN 25.5 24 39 21 18.5 17.5-22.5 20.5 17.5-19 Medium Back Multi-Tilter MM 648 610 991 533 470 445-572 521 445-483 Unit weight: 37 LB 16.8 KG Carton weight: 41 LB 18.6 KG Carton volume: 5.77 FT³ 0.16 MT³ A, B, C, D, G, H, M, N, S 58 officestogocanada.com

SEATING SIX 31 S SIX 31 model OTG11631G A great general purpose office chair. Contoured seat and back with thick cushions. Standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. OTG11531B and OTG11631B are upholstered in Black Quilt (QL10) OTG11631G is upholstered in Charcoal Grey Quilt (QL11). Multi-tilter chair - Center tilt with infinite position tilt lock. - Tilt tension adjustment. - Independent back and seat angle adjustments. - Internal rachet back height adjustment. - Seat depth adjustment. - Pneumatic seat height adjustment. Operator chairs - Center tilt with infinite position tilt lock. - Tilt tension adjustment. - Independent back and seat angle adjustments - Back height adjustment. - Pneumatic seat height adjustment. (C65R). Add $76/set. OTG11531B 534 Black IN 25.5 24 42.5 20 17 19-23 19.5 20.5-23.5 Medium Back Multi-Tilter MM 648 610 1080 508 432 483-584 495 521-597 Unit weight: 55 LB 25 KG Carton weight: 65 LB 29.48 KG Carton volume: 8 FT³ 0.22 MT³ A, B, C, D, E, F, G, H, M, N, S OTG11631B 391 Black IN 25.5 25 44 20.5 19 18.5-22.5 20 23-24.5 Medium Back Operator MM 648 635 1118 521 483 470-572 508 584-622 Unit weight: 42 LB 19.1 KG Carton weight: 46 LB 20.87 KG Carton volume: 6.5 FT³ 0.18 MT³ A, B, C, D, G, H, M, N, S officestogocanada.com 59

S SODA / STACKLITE SEATING SODA model MVL13017 A contemporary, yet retro light lounge chair featuring fully upholstered seat and back. Back design offers flexible movement. Generous proportions allow for a variety of seating positions. Chrome frame with clear polycarbonate glides is standard and suitable for carpet, rubber or concrete flooring. Can be upholstered in all Global grade 1 seating textiles or in (see page 119). MVL13017 530 MVL13017F 530 IN 27 24 32 27 18 17 22 15.5 Lounge Chair MM 686 610 813 686 457 432 559 394 Unit weight: 30 LB 13.6 KG Carton weight: 37 LB 16.78 KG Carton volume: 15.75 FT³ 0.44 MT³ M, N STACKLITE model MVL13046 Canadian made, lightweight stacking chair. ¾ steel tube frame in Black Sandtex finish. Standard with Black polypropylene glides. Stacks up to 10 high on floor or dolly (OTG11705). Features a handhold in upper back to assist with handling and stacking. Can be upholstered in all Global grade 1 seating textiles or in (see page 119). MVL13046 132 IN 17.5 22.5 33.5 16.5 16.5 18 12 15.5 Lightweight Stacking Side Chair Sold in sets of 4 chairs. MM 445 572 851 419 419 457 305 394 Unit weight: 13 LB 5.9 KG Carton weight: 14 LB 6.35 KG Carton volume: 12 FT³ 0.33 MT³ M, N 4 per carton (pricing and specifications are for one chair) OTG11705 145 IN 19.5 20.5 3.5 - - - - - Dolly Stacks MVL13046 chairs, MM 495 521 89 - - - - - Unit weight: 6 LB 2.7 KG up to 10 high. Carton weight: 6.5 LB 2.95 KG Carton volume: 1.5 FT³ 0.04 MT³ 60 officestogocanada.com

SEATING STRADIC S STRADIC model MVL11860 Tilter chair with a unique design mesh back. Standard with height adjustable arms with soft self-skinned urethane (SSU) armcaps that slide forward and backward. Dual wheel carpet casters (C1) are standard. Air flow mesh back is available in Black only. Seat can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C9R). Add $16/set. MVL11860 402 IN 25 23.5 35.5 20 17.5 15.5-20.5 18.5 18 Tilter, Mesh Back and Uph seat MM 635 597 902 508 445 394-521 470 457 Unit weight: 35 LB 15.9 KG Carton weight: 40 LB 18.14 KG RTA 1 Carton volume: 9.5 FT³ 0.26 MT³ A, B, C, H, M, N, S officestogocanada.com 61

T TAMI SEATING TAMI model MVL1617 model MVL1616 Canadian made task chairs. Hinged back for enhanced comfort. Scuff resistant outer back shroud. MVL1617 is standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. Can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Seat depth adjustment. (C65R). Add $16/set. MVL1616 181 IN 18 22 32 18 16 15.5-20.5 15.5 14 Armless Task MM 457 559 813 457 406 394-521 394 356 Unit weight: 18 LB 8.2 KG Carton weight: 21 LB 9.53 KG Carton volume: 3.6 FT³ 0.1 MT³ C, E, M, N MVL1617 252 IN 22 22 32 18 16 15.5-20.5 15.5 14 Task w/arms MM 559 559 813 457 406 394-521 394 356 Unit weight: 24 LB 10.9 KG Carton weight: 27 LB 12.25 KG Carton volume: 4.6 FT³ 0.13 MT³ C, E, H, M, N MVL2784 84 IN 3 10 12 - - - - - Height Adjustable T-Arms - 1 pair MM 76 254 305 - - - - - Unit weight: 8 LB 3.6 KG Carton weight: 10 LB 4.54 KG Carton volume: 1.3 FT³ 0.03 MT³ 1 pair per carton (pricing is for the pair, specifications are for one arm) 62 officestogocanada.com

SEATING THOMPSON / TOMA T THOMPSON model OTG11633B Plush management chair. Contoured cushions with waterfall seat edge and integrated headrest. Polished aluminum fixed loop arms with upholstered armcaps. Polished aluminum base with scuff resistant tips and dual wheel carpet casters (C65). Seating surfaces are upholstered in Black with contrasting stitch details. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. OTG11633B 597 IN 26 31 43 22.5 21 16-20 22 25 High Back Tilter MM 660 787 1092 572 533 406-508 559 635 Unit weight: 44 LB 20 KG Carton weight: 48 LB 21.77 KG Carton volume: 7.5 FT³ 0.21 MT³ A, B, C, M, N, S TOMA Mesh back synchro-tilter chair. Standard with height adjustable T arms with self-skinned urethane (SSU) armcaps. Black base with dual wheel carpet casters (C1) is standard. Only available in Black polyester seat fabric with a Black mesh back. Upright position tilt lock. Tilt tension adjustment. Height adjustable flexible lumbar support. (C9R). Add $76/set. model OTG13032 OTG13032 399 IN 24 24 40 18.5 17 18.5-22.5 17.5 20.5 Medium Back Synchro-Tilter MM 610 610 1016 470 432 470-572 445 521 Unit weight: 31 LB 14.1 KG Carton weight: 36 LB 16.33 KG Carton volume: 4.7 FT³ 0.13 MT³ A, B, C, D, H, L, M, N officestogocanada.com 63

T TUMI SEATING TUMI Contemporary management and boardroom chair. Fixed durable nylon arms. Dual wheel carpet casters (C65) are standard. Seating surfaces are upholstered in Black. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11776B OTG11776B 318 IN 24.5 25 41.5 20.5 18.5 16.5-20.5 20.5 22.5 High Back Tilter MM 622 635 1054 521 470 419-521 521 572 Unit weight: 31 LB 14.1 KG Carton weight: 37 LB 16.78 KG Carton volume: 4.2 FT³ 0.11 MT³ A, B, C, M, N, S 64 officestogocanada.com

SEATING ULTRA U ULTRA Canadian made tilter and guest chairs. Internal welded steel frame. Chrome fixed arms (except armless models) and base. Dual wheel carpet casters (C65) are standard (except guest chairs). Seating surfaces can be upholstered in Luxhide bonded leather, in various colors (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. Optional removable upholstered armcaps are available for tilter models with arms, please order (MVL11733). model MVL11730 model MVL11743 ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. MVL11730 520 IN 23.5 24.5 40 21 17.5 17.5-22.5 20 21 High Back Tilter w/arms MM 597 622 1016 533 445 445-572 508 533 Unit weight: 32 LB 14.5 KG Carton weight: 44 LB 19.96 KG RTA 1 Carton volume: 11 FT³ 0.31 MT³ A, B, C, M, N, S MVL11732 469 IN 21 24.5 40 21 17.5 17.5-22.5 20 21 Armless High Back Tilter MM 533 622 1016 533 445 445-572 508 533 Unit weight: 28 LB 12.7 KG Carton weight: 38 LB 17.24 KG RTA 1 Carton volume: 11 FT³ 0.31 MT³ A, B, C, M, N, S MVL11733 41 IN 5.5 9.25 0.25 - - - - - Upholstered Armcaps - 1 pair For models with arms: MM 140 235 6 - - - - - Unit weight: 0.25 LB 0.1 KG MVL11730, MVL11734. Carton weight: 0.75 LB 0.34 KG Carton volume: 0.2 FT³ 0.01 MT³ (pricing is for the pair, specifications are for one armcap) MVL11734 506 IN 23.5 24.5 38 21 17.5 17.5-22.5 20 19 Low Back Tilter w/arms MM 597 622 965 533 445 445-572 508 483 Unit weight: 35 LB 15.9 KG Carton weight: 42 LB 19.05 KG RTA 1 Carton volume: 11 FT³ 0.31 MT³ A, B, C, M, N, S officestogocanada.com 65

U ULTRA SEATING MVL11735 457 IN 21 24.5 38 21 17.5 17.5-22.5 20 19 Armless Low Back Tilter MM 533 622 965 533 445 445-572 508 483 Unit weight: 31 LB 14.1 KG Carton weight: 38 LB 17.24 KG RTA 1 Carton volume: 11 FT³ 0.31 MT³ A, B, C, M, N, S MVL11742 579 IN 24.25 25 35 21 17.5 18 21 17.5 Medium Back Guest Chair, Cantilever Base MM 616 635 889 533 445 457 533 445 Unit weight: 32 LB 14.5 KG Carton weight: 40 LB 18.14 KG Carton volume: 13.25 FT³ 0.37 MT³ M, N MVL11743 497 IN 21 24.75 35 21 17.5 18 21 17.5 Armless Medium Back Guest Chair, Cantilever Base MM 533 629 889 533 445 457 533 445 Unit weight: 26 LB 11.8 KG Carton weight: 32 LB 14.51 KG Carton volume: 13.75 FT³ 0.38 MT³ M, N 66 officestogocanada.com

SEATING VALAN V VALAN model OTG11980 Synchro-tilter chairs with a geometric square mesh back design and internal lumbar support. Standard with height adjustable T-arms with soft self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C1) are standard. Air flow mesh back is available in Black only. OTG11980 seating surface can be upholstered in, in various colors (see page 119) OTG11980F seat can be upholstered in all Global grade 1 seating textiles (see page 119) Synchro tilt with upright position tilt lock. Tilt tension adjustment. (C9R). Add $76/set. OTG11980 559 OTG11980F 559 IN 26 24 44 20.5 18 18-22 18 24.5 High Back Synchro-Tilter, Mesh Back and Uph Seat MM 660 610 1118 521 457 457-559 457 622 Unit weight: 36 LB 16.4 KG Carton weight: 42 LB 19.05 KG Carton volume: 5.75 FT³ 0.16 MT³ A, B, C, H, L, M, N officestogocanada.com 67

V VANIER SEATING VANIER model MVL3170 model MVL3172 Management, boardroom and guest chairs. Canadian made. Generously padded seat and compound-curved back. Fixed nylon arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C1) are standard (except guest chair). Guest chair has an oval steel tube frame with sled base. Seating surfaces can be upholstered in Luxhide bonded leather, in various colors (see page 119) Center tilt with upright position tilt lock. Tilt tension adjustment. (C9R). Add $16/set. ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. MVL3170 566 IN 25.5 26 43 21 18 17-22 19 25.5 High Back Tilter MM 648 660 1092 533 457 432-559 483 648 Unit weight: 40 LB 18.2 KG Carton weight: 47 LB 21.32 KG Carton volume: 12 FT³ 0.33 MT³ A, B, C, M, N, S RTA 1 MVL3171 542 IN 25.5 26 37 21 18 17-22 19 19.5 Medium Back Tilter MM 648 660 940 533 457 432-559 483 495 Unit weight: 35 LB 15.9 KG Carton weight: 41 LB 18.6 KG Carton volume: 11.5 FT³ 0.32 MT³ A, B, C, M, N, S RTA 1 MVL3172 529 IN 25.5 26 34.5 21 18 17 19 18.5 Medium Back Guest Chair - Sled Base MM 648 660 876 533 457 432 483 470 Unit weight: 31 LB 14.1 KG Carton weight: 37 LB 16.78 KG Carton volume: 15.75 FT³ 0.44 MT³ M, N 68 officestogocanada.com

SEATING VOS V VOS Contemporary design. Fully upholstered seat and back. Scuff resistant back shell. Height adjustable arms with self-skinned urethane (SSU) armcaps. Black spider base with dual wheel carpet casters (C1) is standard. Only available in Black air mesh fabric (MS20). Upright position tilt lock. Tilt tension adjustment. (C9R). Add $76/set. model OTG11715B OTG11715B 429 IN 25.5 21.5 40.5 19.5 17.5 18-22 19 21 High Back Synchro-Tilter MM 648 546 1029 495 445 457-559 483 533 Unit weight: 41 LB 18.6 KG Carton weight: 45 LB 20.41 KG Carton volume: 4.7 FT³ 0.13 MT³ A, B, C, H, L, M, N officestogocanada.com 69

W WOODBRIDGE WOODBRIDGE Management and boardroom chair. Durable nylon arms with upholstered armrests. Dual wheel carpet casters (C65) are standard. Seating surfaces are upholstered in Black. SEATING Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11617B OTG11617B 352 IN 26 27 42.5 20.5 18 16.5-20.5 21 24 High Back Tilter MM 660 686 1080 521 457 419-521 533 610 Unit weight: 34 LB 15.5 KG Carton weight: 38 LB 17.24 KG Carton volume: 6.13 FT³ 0.17 MT³ A, B, C, M, N, S 70 officestogocanada.com

SEATING YOHO Y YOHO model MVL2789 Canadian made task chairs. Thick cushion compound-curved back offers great lumbar support. Standard with height adjustable T-arms with durable self-skinned urethane (SSU) armcaps (except armless models). Dual wheel carpet casters (C65) are standard. Drafting chairs are equipped with a height adjustable Chrome footrest. Seating surfaces can be upholstered in Luxhide bonded leather (various colors) or in all Global grade 1 seating textiles (see page 119). For a fabric seat specify models ending in F. Seat depth adjustment. (C65R). Add $16/set. MVL2786 265 MVL2786F 265 IN 19 24 34 19 16.5 16-21 17.5 16 Armless Task MM 483 610 864 483 419 406-533 445 406 Unit weight: 23 LB 10.5 KG Carton weight: 28 LB 12.7 KG Carton volume: 4.7 FT³ 0.13 MT³ C, E, M, N MVL2789 348 MVL2789F 348 IN 24 24 34 19 16.5 16-21 17.5 16 Task w/arms MM 610 610 864 483 419 406-533 445 406 Unit weight: 29 LB 13.2 KG Carton weight: 34 LB 15.42 KG Carton volume: 4.7 FT³ 0.13 MT³ C, E, H, M, N MVL2796 411 MVL2796F 411 IN 19 24 44 19 16.5 23.5-33.5 17.5 16 Armless Drafting Task MM 483 610 1118 483 419 597-851 445 406 Unit weight: 40 LB 18.2 KG Carton weight: 45 LB 20.41 KG Carton volume: 7 FT³ 0.19 MT³ C, E, M, N officestogocanada.com 71