Z/A/X/DZ Common Accessories Z/A/X/DZ Ordering Information List of s Terminal Covers (Sold Separately) Common to Z, A, X, and DZ s The Terminal Cover is secured with mounting s and protects the casing and terminal wires from dust, vibration, or fingers, thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents. Terminal Covers made of phenol resin have five or six thin wall sections. These sections can be torn open for providing holes for lead cables at desired points. Application Soldering terminal use Screw terminal use Remarks Material Mounting direction Phenol resin Side mounting AP-A AP-B --- Metal press mold Side mounting AP1-A AP1-B Used for AP-A and AP-B Vinyl chloride Side mounting AP-Z --- Note: Use the -terminal use Terminal Cover for DZ-series soldering-terminal models. Separator (Sold Separately) Common to Z, A, X, and DZ s : Separator for Z Actuators (Sold Separately) Common to Z and X s A Switch can be actuated by a cam or an appropriate object, in which case, use one of the following Actuators according to the application. Hinge lever Actuator Common to Z and X models XAA-1 Hinge roller lever ZAA-2 Panel mount plunger Short Medium Long Panel mount roller plunger 2 Z/A/X/DZ Common Accessories Z/A/X/DZ F-223
Dimensions Dimensions and Operating Characteristics Terminal Covers AP-A Soldering Terminal Use (Phenol Resin) AP-B Screw Terminal Use (Phenol Resin) 2.15R 2.15R Note: The Cover has five thin, easy-to-separate portions for easy lead wire connections. Note: The Cover has six thin, easy-to-separate portions for easy lead wire connections. AP1-A Soldering Terminal Use (Metal Press Mold) AP1-B Screw Terminal Use (Metal Press Mold) 2.15R 2.15R AP-Z Note: 1. The Cover has five holes for easy lead wire connections. 2. AP1-A should be used with AP-A. Soldering or Screw Terminal Use (Vinyl Chloride) Pressure plate (t1 steel) Two, 4.2 Note: 1. The Cover has six holes for easy lead wire connections. 2. AP1-B should be used with AP-B. Cable Pull-out Dimension A-A' cross-section B-B' cross-section 8 6 Nut M3 20 Phillips (with plane washer and nut) Note: Each dimension has a tolerance of ±0.4 mm unless otherwise specified. (± for the AP-Z) Note: A 6- or 8- cable can be used by cutting the cable pull-out hole to the size of the cable to be used. F-224 Z/A/X/DZ Common Accessories Z/A/X/DZ
Separator Two, 4.5 Note: 1. Each dimension has a tolerance of +0.4 mm unless otherwise specified. 2. The material is EAVTC (Epoxide Alkyd Varnished Tetron Cloth) and its heat-resisting temperature is 130 C. t = 0.34 Actuators Note: These Actuators are not provided with. Hinge Lever XAA-1 Two, M4 Stainless steel 60R Two, M4 30 Z-15G-B X-10G-B FP max. 2.2 mm 32.9±1. 3.3 mm Hinge Roller Lever ZAA-2 Two, M4 Two, M4 30 9.5 4.8 (stainlesssteel roller) Z-15G-B X-10G-B FP max. 2.2 mm 44.5±1. 3.3 mm Stainless steel 58.5R Note: Each dimension has a tolerance of ±0.4 mm unless otherwise specified. Z/A/X/DZ Common Accessories Z/A/X/DZ F-225
Short Panel Mount Plunger 7.9 Two M4 nuts 4.8 mm 27.8±1.5 mm 4.5 mm Two M4 25 ± round head 3. Incomplete section part Medium Panel Mount Plunger 7.9 4.8 mm 53.2±1.5 mm 4.5 mm Two M4 25 Two M4 nuts 3. Incomplete section part Long Panel Mount Plunger 7.9 Two, M4 25 s 20. 69.1±1.5 mm 20.4 mm 3. Incomplete section part Two, M4 nuts F-226 Z/A/X/DZ Common Accessories Z/A/X/DZ
Panel Mount Roller Plunger 2 PT 1.6 20.7 48 ±0.25 12.7 18.9 23.9 4.8 Two hex nuts 5-mm thickness, 19 mm between opposing edges With groove for roller penetration 2 20. 37± 20.4 mm Note: This actuator (roller plunger) can be (Note used 2) with standard pin plungers (Z- 25.4±0.2 Two, M4 25 Spring washer 20.7 15G(-B), 11.9 Z-15E(-B), and DZ-10G- s 49.2 1A(-1B)). It cannot be used with X models. 3. Incomplete section part. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. B106-E1-01 In the interest of product improvement, specifications are subject to change without notice.