Landing gears More than just a standard landing gear: The JOST Modul family www.jost-world.com
More than just a standard landing gear: The JOST Modul family When travelling across Europe, nearly all trailers on the road are equipped with telescopic landing gears from JOST. This is no surprise, as JOST s decades-long experience in the construction of landing gears means that they know exactly what their customers need. The landing gears from JOST are not only extraordinarily robust and particularly diverse, but are also proven in daily use millions of times over. Modular design with a wide variety of options Greatest flexibility of installation thanks to various mounting heights, back plates, crank handles and connection shafts Very compact design of the internal Modul drive Comprehensive spare parts catalogue Attractive design Made by JOST Top-class quality Regular inspections during series production which exceed AAR standards Quality management in accordance with ISO / TS 16949 Environmental management in accordance with ISO 14001 3 year guarantee Our experience, your benefit! Proven millions of times over Tried-and-tested Modul system efficient and reliable robust and durable user-friendly best service
Outstanding corrosion protection Careful pre-treatment Outstanding surface quality thanks to blasting and powder coating Long-lasting protection against environmental influences and stone chips Easy maintenance Long-lasting, maintenance-free drive The spindle features a long-term lubrication applied ex works Re-lubrication is only necessary after three years No need for subsequent lubrication of our stabilising (Modul CS) and aluminium telescopic landing gears (Modul CA) with lubrication tube Patented Modul drive Time-saving and economical operation Large lift by one turn of the crank (15 mm) with a low cranking force Easy to change between high and low gear Optimum protection due to internal design Extremely compact design with high efficiency and low wear Landing gears from JOST are extraordinarily robust and also resist unfavourable environmental conditions
OPTIMA Weight-optimised Especially lightweight Efficient Ideally suited for long-distance transport Available from Q2 / 2019 Weight-optimised for greater efficiency OPTIMA is the ideal solution for long-distance transport applications. It is based on the highly reliable Modul components and is very economical thanks to its low weight. OPTIMA is available with four different mounting heights and three plate positions. Advantages Low weight Efficient Reliable 3 plate positions (high, low, double) S foot with 125 mm drift
Modul B Multifaceted Best-in-Class Wide range of versions For all needs S foot (Standard) A foot (Rocking foot) T foot (Sand shoe) TC foot (Flat sand shoe) Versatility through modular design Modul B offers very versatile use. It can take on any task as it features six mounting heights and an easy-to-assemble and easy-to-replace foot system with four different foot types. Advantages Significant gain in lifting force S foot with the longest drift (+ / 140 mm) and largest footprint Additional reinforcements for lateral-force resistance 3 plate positions (high, low, double) Modular system and extensive spare parts catalogue Optionally available for two-sided operation
Modul C Special Especially light, especially stable simply special For special applications Highly reliable components Modul CY Modul CS Modul CH Modul CA Modul CD The landing gears for special requirements Based on the highly reliable and proven Modul components, the Modul C special landing gears have been developed specifically for special applications. There are many different versions, e.g. for central axle trailers and dollies or for tank and silo transports. Optionally, they are available for two-sided operation. Aluminium landing gear Modul CA Greatest possible weight advantage Especially suited for tank and silotrailers Compact landing gear Modul CC Ideally suited for rear support when loading by forklift Large ground clearance thanks to optional swivel bearing Drawbar landing leg Modul CD For central axle trailers Additional ground clearance thanks to optional swivel bearing Drop leg Modul CF Maximum lift at low mounting height Additional drop extension Heavy Duty leg Modul CH Highly robust Increased static test load Inside chassis mounting Modul CI For semi-trailers with exterior frames or self-supporting superstructures Stabilising leg Modul CS For liquid and bulk tippers (rear) Support while unloading Ro-Ro-Winde Modul CY Highest resistance to bending Reinforced roller foot
Modul E-Drive Electric Increased comfort and safety Eliminates manual cranking Future-oriented Modul E-Drive for safe and easy operation With the electric landing gear, JOST sets new standards in comfort, workplace safety and efficiency. The Modul E-Drive is particularly useful in narrow spaces and for frequent coupling and decoupling. In addition to the proven Modul quality, the Modul E-Drive boasts many other outstanding features, such as supporting operators and improving the fleet s availability day in and day out. Advantages Improved coupling and decoupling of the trailer Simple operation at the push of a button Drive shuts down automatically in the event of ground contact Manual operation still possible Differences in height between the truck and the trailer can be compensated using the vehicle s pneumatic suspension or manual cranking in the low gear.
More than just a standard landing gear: The JOST Modul family Best service Since the market launch of Modul in 2000, more than seven million landing gears have been sold in over 80 countries. JOST can ensure short delivery times and a global spare parts supply thanks to its worldwide sites and the far-reaching dealer network. Advantages Extensive distribution high availability Easy maintenance High spare parts depth ZDE 199 006 082 EN 08/18 Subject to change without prior notice JOST, Germany Tel. +49 6102 295-0, jost-sales@jost-world.com, www.jost-world.com