Code 7837 1 of 22 Content Areas, Titles and Task Statements 00 FOUNDATIONS OF AUTOMOTIVE TECHNOLOGY A AUTOMOTIVE SAFETY AUT101 A001 Use Eye Protection AUT101 OSHA 1910.132 1.1.11A,D N/A N/A 13.2.11.E A002 Use Foot Protection AUT101 OSHA 1910.132 1.1.11A,D N/A N/A 13.2.11.E A003 Use Hearing Protection AUT101 OSHA 1910.132 1.1.11A,D N/A N/A 13.2.11.E A004 Use Respiratory Protection AUT101 OSHA 1910.132 1.1.11A,D N/A N/A 13.2.11.E A005 Use First Aid Kit AUT101 N/A 1.1.11A,D N/A N/A 13.2.11.E A006 Use Eye Wash Station AUT101 N/A 1.1.11A,D N/A N/A 13.2.11.E A007 Handle Hazardous Materials AUT101 OSHA 910.1200 1.1.11A,D N/A N/A 13.2.11.E A008 Use Fire Alarm AUT101 N/A 1.1.11A,D N/A N/A 13.2.11.E A009 Use Fire Extinguisher AUT101 OSHA 1910.157 1.1.11A,D N/A N/A 13.2.11.E A010 Participate in a Fire Drill AUT101 N/A 1.1.11A,D N/A N/A 13.2.11.E A011 Participate in a Tornado Drill AUT101 N/A 1.1.11A,D N/A N/A 13.2.11.E B MERCHANDISING AUT102 B001 Locate and interpret vehicle and major component identification numbers. P 1 AUT102 NATEF 1.1.11.A,D,E 1.4.11.D 2.1.3 B 13.3.11.A B002 Complete work order to include customer information, customer concern, related service history, cause and correction. AUT102 NATEF 1.1.11.A,D,E 1.4.11.D 2.1.5 C,2.28A 13.3.11A B003 Prepare an Estimate AUT102 N/A 1.1.11.A,D,E 1.4.11.D 2.1.5C 2.28 A,C,E 13.3.11A B004 Demonstrate Communication s AUT102 N/A N/A 1.4.11.D N/A 13.3.11A C TOOLS AND EQUIPMENT AUT103 C001 Use Basic Hand Tools AUT103 N/A 1.1.11.A,D 1.4.11.D 2.1.5 A 2.2.8B 13.3.11.A C002 Use a Torque Wrench AUT103 N/A 1.1.11.A,D 1.4.11.D 2.3.5 A 2.2.8A 13.3.11.A C003 Use a Floor Jack AUT103 N/A 1.1.11.A,D 1.4.11.D N/A 13.3.11.A C004 Use a Safety Stand AUT103 N/A N/A 1.4.11.D N/A 13.3.11.A C005 Use a Frame Contact Lift AUT103 N/A 1.1.11.A,D 1.4.11.D N/A 13.3.11.A C006 Use a Suspension Contact Lift AUT103 N/A 1.1.11.A,D 1.4.11.D N/A 13.3.11.A C007 Use a Solvents Tank AUT103 N/A 1.1.11.A,D 1.4.11.D N/A 13.3.11.A
Code 7837 2 of 22 Content Areas, Titles and Task Statements C008 Use a Drill Press AUT103 N/A 1.1.11.A,D 1.4.11.D 2.1.5 C 13.3.11.A C009 Use a Hand Held Drill AUT103 N/A 1.1.11.A,D 1.4.11.D 2.1.5 C 13.3.11.A CC10 Use a Pedestal Grinder AUT103 N/A 1.1.11.A,D 1.4.11.D N/A 13.3.11.A C011 Use a Tap & Die AUT103 N/A 1.1.11.A,D 1.4.11.D 2.1.5 C 13.3.11.A C012 Demonstrate the ability to safely set up/shut down oxygen acetylene welding equipment. AUT103 N/A 1.1.11 A,D 1.4.11 D 2.1.5 C 13.3.11 A C013 Identify and demonstrate the safe use of power tools. AUT103 N/A 1.1.11 A,D 1.4.11 D 2.1.5 C 13.3.11 A D INFORMATION SYSTEMS AUT104 D001 Research applicable vehicle and service information, such as internal engine operation, vehicle service history, service precautions, and technical service bulletins. P 1 AUT104 NATEF 1.1.11.A,D,E 1.4.11.D N/A 13.3.11.A D002 Use computer based service information AUT104 NATEF 1.1.11.A,D,E 1.4.11.D N/A 13.3.11.A E LEADERSHIP PFS109 F BUSINESS PRINCIPLES PFS209 G TOTAL QUALITY PRINCIPLES PFS309 GG BEFORE THE INTERVIEW PRESENTING YOURSELF ON PAPER GAA211 GG01 Complete a pocket resume GAA211 GG02 Prepare a list of potential employers GAA211 GG03 Create a resume GAA211 GG04 Type a personal reference page GAA211 GG05 Write a cover letter GAA211 GG06 Complete a job application GAA211 GG07 Maintain a career planning portfolio GAA211 GGG LANDING THAT JOB THE INTERVIEW GAA212 GGG01 Prepare for a job interview GAA212 GGG02 Participate in mock interviews GAA212 GGG03 Write a follow up thank you letter GAA212 GGG04 Maintain a career planning portfolio GAA212 American School Counselor Association Standards, C:A2.2 C:B2.5 American School Counselor Association Standards, C:A2.2 C:B2.5, PS:A1.10 H JOB SHADOWING AUT401 I COOPERATIVE WORK PLACEMENT AUT402 J AYES INTERNSHIP AUT405 10 MATHEMATICS AUTOMOTIVE TECHNICAL MATH I AUT111 J 1 Add, Subtract, Multiply and Divide Whole s. AUT111 N/A CC.1.2.11 12.K N/A CC.2.1.5.B.1 N/A
Code 7837 3 of 22 Content Areas, Titles and Task Statements CC.2.1.5.C.1 CC.2.1.5.C.2 J 2 Add, Subtract, Multiply and Divide Decimal Fractions. AUT111 N/A CC.1.2.11 12.K N/A J 3 Add, Subtract, Multiply and Divide Decimals. AUT111 N/A CC.1.2.11 12.K N/A CC.2.1.5.B.2 N/A J 4 Measurement AUT111 N/A CC.1.2.11 12.K N/A CC.2.3.7.A.1 N/A J 5 Metric System AUT111 N/A CC.1.2.11 12.K N/A CC.2.3.7.A.1 N/A J 6 Convert Measurements AUT111 N/A CC.1.2.11 12.K N/A CC.2.4.5.A.1 N/A J 7 Fraction Decimal Percent Equivalent AUT111 N/A CC.1.2.11 12.K N/A CC.2.1.4.C.3 N/A J 8 Percentage Problems AUT111 N/A CC.1.2.11 12.K N/A CC.2.1.7.D.1 N/A AUTOMOTIVE TECHNICAL MATH II AUT211 J 9 Measuring Angles Degree/Minutes AUT211 N/A CC.1.2.11 12.K N/A CC.2.3.HS.A.14 N/A J 10 Add, Subtract Angular Measurement AUT211 N/A CC.1.2.11 12.K N/A CC.2.3.HS.A.14 N/A J 11 Circular Measure, Area, Circumference AUT211 N/A CC.1.2.11 12.K N/A CC.2.3.HS.A.14 N/A J 12 Cylinders and Volume AUT211 N/A CC.1.2.11 12.K N/A CC.2.3.HS.A.14 N/A J 13 Ratios and Proportions AUT211 N/A CC.1.2.11 12.K N/A CC.2.1.7.D.1 N/A J 14 Percentages AUT211 N/A CC.1.2.11 12.K N/A CC.2.1.7.D.1 N/A J 15 Discounts AUT211 N/A CC.1.2.11 12.K N/A CC.2.1.HS.F.4 N/A J 16 Profit and Loss AUT211 N/A CC.1.2.11 12.K N/A CC.2.1.HS.F.4 N/A AUTOMOTIVE TECHNICAL MATH III AUT311 J 17 Interest and Payments AUT311 N/A CC.1.2.11 12.K N/A CC.2.1.HS.F.4 13.3.11 D J 18 Employer/Employee Taxes AUT311 N/A CC.1.2.11 12.K N/A CC.2.1.HS.F.4 13.3.11 D J 19 Property Taxes AUT311 N/A CC.1.2.11 12.K N/A CC.2.1.HS.F.4 13.3.11 D J 20 Automobile Engine System AUT311 N/A CC.1.2.11 12.K N/A CC.2.2.HS.C.5 13.3.11 D J 21 Automobile Electrical System AUT311 N/A CC.1.2.11 12.K N/A CC.2.2.HS.C.5 13.3.11 D J 22 Automobile Drive Train AUT311 N/A CC.1.2.11 12.K N/A CC.2.2.HS.C.5 13.3.11 D J 23 Automobile Chassis AUT311 N/A CC.1.2.11 12.K N/A CC.2.2.HS.C.5 13.3.11 D J 24 Automobile HVAC AUT311 N/A CC.1.2.11 12.K N/A CC.2.2.HS.C.5 13.3.11 D 20 ENGINE REPAIR K LUBRICATION SYSTEMS AUT121 K001 Perform oil pressure tests; determine AUT121 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A 13.3.11.A K002 Inspect oil pump gears or rotors, housing, pressure relief devices, and pump drive; perform necessary action. P 2 AUT121 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,B 13.3.11.A K003 Inspect auxiliary coolers; determine necessary action. P 3 AUT121 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A K004 Inspect, test, and replace oil temperature and pressure switches and sensors. P 2 AUT121 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A K005 Perform engine oil and filter change. P 1 AUT121 NATEF N/A 1.4.11.D 2.3.5 A 13.3.11A L COOLING SYSTEMS I AUT122 N/A
Code 7837 4 of 22 Content Areas, Titles and Task Statements Perform cooling system pressure tests; check coolant condition, inspect L001 and test radiator, pressure cap, coolant recovery tank, and hoses, determine Inspect, replace, and adjust drive belts, tensioners, and pulleys; check L002 pulley and belt alignment. P 1 AUT122 NATEF 1.1.11.A,D 1.4.11.D 2.3.3 A 13.3.11.A AUT122 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,C,E 13.3.11.A L003 Inspect and replace engine cooling and heater system hoses. P 1 AUT122 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,C,E 13.3.11.A L004 Inspect, test, and replace thermostat and gasket/seal. P 1 AUT122 NATEF N/A 1.4.11.D 2.3.5 A,C,E 13.3.11.A L005 coolant; drain and recover coolant; flush and refill cooling system with recommended coolant; bleed air as required. P 1 AUT221 NATEF 1.1.11.A,D 1.4.11.D 2.3.8.E 13.3.11.A M ENGINE FUNDAMENTALS AUT221 M001 Remove cylinder head: inspect gasket condition; install cylinder head and gasket; tighten according to manufacturer's specifications and procedures P 1 AUT221 NATEF 1.1.11.A,D,F 1.4.11.D 2.3.8 E 13.3.11.A M002 Clean and visually inspect a cylinder head for cracks; check gasket surface areas for warpage and surface finish; check passage condition. P 1 AUT221 NATEF 1.1.11.A,D,F 1.4.11.D 2.3.5 C,E 13.3.11.A M003 Inspect valve springs for squareness and free height comparison; determine necessary action. P 3 AUT221 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 C 13.3.11.A M004 Inspect valve guides for wear; check valve stem to guide clearance; determine necessary action. P 3 AUT221 NATEF 1.1.11.A,D 1.4.11.D 2.1.3.B 13.3.11.A M005 Inspect valves and valve seats; determine necessary action. P 3 AUT221 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A M006 Check valve spring assembled height and valve stem height; determine necessary action. P 3 AUT221 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 E 13.3.11A M007 Inspect pushrods, rocker arms, rocker arm pivots and shafts for wear, bending, cracks, looseness and blocked oil passages (orifices); determine AUT221 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11A necessary action. P 2 M008 Inspect valve lifters; determine necessary action. P 2 AUT221 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11A M009 Adjust valves (mechanical or hydraulic lifers). P 1 AUT221 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 C 13.3.11.A M010 M011 M013 Inspect and replace camshaft and drive belt/chain (includes checking drive gear wear and backlash, end play, sprocket and chain wear, overhead cam drive sprocket(s) drive belt(s), belt tension, tensioners, camshaft reluctor ring/tone wheel, and variable valve timing components). P 1 Inspect and/or measure camshaft for runout, journal wear and lobe wear. P 2 Inspect camshaft bearing surface for wear, damage, out of round, and alignment; determine necessary action. P 2 AUT221 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,E 13.311.A AUT221 NATEF 1.1.11.A,D 11.4.11.D 2.3.8 C,D,E 13.3.11.A AUT221 NATEF 1.1.11.A,D 11.4.11.D 2.3.8 C,D,E 13.3.11.A
Code 7837 5 of 22 Content Areas, Titles and Task Statements MM14 Establish camshaft position sensor indexing P 1 AUT221 NATEF 1.1.11.A,D 1.4.11.D 2.1.5 A,D 13.3.11.A MMM AUTOMOTIVE HVAC SYSTEMS AUT222 MMM01 MMM02 MMM03 MMM04 MMM05 MMM06 O ENGINE DIAGNOSIS AND REPAIR AUT224 O001 Identify and interpret engine concern; determine AUT224 NATEF 1.1.11.A,D 1.4.11.D 2.1.5 C 13.3.11.A O002 O003 O004 O005 Research applicable vehicle and service information, such as internal engine operation, vehicle service history, service precautions, and technical service bulletins. P 1 Locate and interpret vehicle and major component identification numbers. P 1 Inspect engine assembly for fuel, oil, coolant, and other leaks; determine necessary action. P 2 Diagnose abnormal engine noises or vibration concerns; determine necessary action. P 3 AUT224 NATEF 1.1.11.A,D.F 1.4.11.D 2.1.3 C 13.3.11.A AUT224 NATEF 1.1.11.A,D,F 1.4.11.D 2.1.3 D 13.3.11.A AUT224 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT224 NATEF 1.1.11.A,D 1.4.11.D 2.1.3 D 13.3.11.A
Code 7837 6 of 22 Content Areas, Titles and Task Statements O006 Diagnose the cause of excessive oil consumption, coolant consumption, unusual engine exhaust color, odor, determine necessary action. P 2 AUT224 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A O007 Perform engine vacuum tests; determine AUT224 NATEF 1.1.11.A,D 1.4.11.D 2.1.5 A,F 13.3.11.A O008 O009 O010 O011 Perform cylinder power balance tests; determine necessary action. P 2 Perform cylinder cranking and running compression tests; determine AUT224 NATEF 1.1.11.A,D 1.4.11.D 2.1.5 A,F 13.3.11.A AUT224 NATEF 1.1.11.A,D 1.4.11.D 2.1.5 A,F 13.3.11.A Perform cylinder leakage tests; determine AUT224 NATEF 1.1.11.A,D 1.4.11.D 2.1.5 A,F 13.3.11.A Diagnose the cause of excessive oil consumption, coolant consumption, unusual engine exhaust color, odor, determine necessary action. P 2 AUT224 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,B,D,E 13.3.11.A O012 Install engine covers using gaskets, seals and sealers as required. P 2 AUT224 NATEF 1.1.11,A.D 1.4.11.D 2.1.5 A,D 13.3.11.A O013 Perform common fastener and thread repair, to include: remove broken bolt, restore internal and external threads, and repair internal threads with AUT224 NATEF 1.1.11,A.D 1.4.11.D 2.1.5 A,D 13.3.11.A thread insert P 1 O014 Inspect, remove, and replace engine mounts P 2 AUT224 NATEF 1.1.11,A.D 1.4.11.D 2.1.5 A,D 13.3.11.A O015 Identify hybrid vehicle internal combustion engine service precautions. P 3 AUT224 NATEF 1.1.11,A.D 1.4.11.D N/A 13.3.11A Q COOLING SYSTEMS II AUT123 Q001 Inspect, remove, and replace water pump. P 2 AUT123 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,B,D,E 13.3.11.A Q002 Remove and replace radiator. P 2 AUT123 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A,C,D 13.3.11.A Q003 Inspect, and test fans(s) (electrical or mechanical), fan clutch, fan shroud/ducting, air dams, and fan control devices; perform necessary AUT123 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A action. P 1 Q004 Identify causes of engine overheating. P 1 AUT123 N/A 1.1.11.A,D 1.4.11.D 2.3.5 A,B,D,E 13.3.11.A 30 AUTOMOTIVE BRAKE SYSTEMS R FUNDAMENTALS OF BRAKING SYSTEMS AUT131 R001 Identify and interpret brake system concern; determine necessary action. P 1 AUT131 NATEF 1.1.11.A,D 1.4.11.D 2.1.3 B 13.3.11.A R002 Research applicable vehicle and service information, such as brake system operation, vehicle service history, service precautions, and technical service bulletins. P 1 AUT131 NATEF 1.1.11.A,D,E,F 1.4.11.D 2.1.3.B 13.3.11.A
Code 7837 7 of 22 Content Areas, Titles and Task Statements R003 Locate and interpret vehicle and major component identification numbers. P 1 AUT131 NATEF 1.1.11.A,D,F 1.4.11.D 2.1.3 B 13.3.11.A R004 Diagnose pressure concerns in the brake system using hydraulic principles (Pascal s Law). P 1 AUT131 NATEF 1.1.11.A,D 1.4.11.D 2.8.8 A,B,D 13.3.11.A R005 Measure brake pedal height, travel and free play (as applicable); determine AUT131 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,B,C,E 13.3.11.A R006 Check master cylinder for internal/external leaks and proper operation; determine AUT131 NATEF 1.1.11 A,D 1.4.11.D N/A 13.3.11.A R007 Remove, bench bleed, and reinstall master cylinder. P 1 AUT131 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,B,C,D,E 13.3.11.A R008 Diagnose poor stopping, pulling or dragging concerns caused by malfunctions in the hydraulic system; determine necessary action. P 2 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R009 Inspect brake lines, flexible hoses, and fittings for leaks, dents, kinks, rust, cracks, bulging or wear; tighten loose fittings and supports; determine AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R010 Replace brake lines, hoses, fittings and supports. P 2 AUT131 NATEF 1.1.11.A,D 1.4.11.D 2.2.8 A,B,D,F 13.3.11.A R011 Fabricate brake lines using proper material and flaring procedures (double flare and ISO types). P 2 AUT131 NATEF 1.1.11.A,D 1.4.11.D 2.2.8 A,B,D,F 13.3.11.A R012 Select, handle, store, and fill brake fluids to proper level. P 1 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R013 Inspect, test, and/or replace metering (hold off), proportioning (balance), pressure differential, and combination valves. P 3 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R014 Inspect, test, and/or replace components of brake warning light system. P 3 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R015 Bleed and/or flush brake system. P 1 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R016 brake fluid for contamination. P 1 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R017 pedal free travel; check power assist operation. P 2 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R018 Check vacuum supply to vacuum type power booster. P 1 AUT131 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 B 13.3.11.A R019 Inspect the vacuum type power booster unit for leaks; inspect the check valve for proper operation; determine necessary action. P 2 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R020 Inspect and test hydraulically assisted power brake system for leaks and proper operation; determine necessary action. P 3 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R021 Measure and adjust master cylinder pushrod length. P 3 AUT131 NATEF 1.1.11.A,D 1.4.11.D 2.3.5.B 13.3.11.A
Code 7837 8 of 22 Content Areas, Titles and Task Statements R022 Check parking brake cables and components for wear, binding, and corrosion; clean, lubricate, adjust or replace as needed. P 2 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A R023 Check parking brake and indicator light system operation; determine AUT131 NATEF 1.1.11.A,D N/A 1.4.11.D 13.3.11.A R024 Check operation of brake stop light system; determine necessary action. P 1 AUT131 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A S BRAKE DIAGNOSIS AND REPAIR AUT231 S001 Diagnose poor stopping, noise, pulling, grabbing, dragging or pedal pulsation concerns; determine AUT231 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A S002 Remove, clean, inspect, and measure brake drums; determine necessary action. P 1 AUT231 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A S003 Refinish brake drum; measure final drum diameter. P 1 AUT231 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A S004 Remove, clean, and inspect brake shoes, springs, pins, clips, levers, adjusters/self adjusters, other related brake hardware, and backing support plates; lubricate and reassemble. P 1 AUT231 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A S005 Inspect, and install wheel cylinders. P 2 AUT231 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A Pre adjust brake shoes and parking brake; install brake drums or AUT231 S006 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A drum/hub assemblies and wheel bearings. P 2 AUT231 S007 Install wheel, torque lug nuts, and make final checks and adjustments. P 1 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,B 13.3.11.A S008 S009 S010 S011 S012 S013 Diagnose poor stopping, noise, pulling, grabbing, dragging or pulsation concerns; determine Remove caliper assembly; inspect for leaks and damage to caliper housing; determine Clean and inspect caliper mounting and slides/pins for operation, wear and damage; determine Remove, inspect and replace pads and retaining hardware; determine Disassemble and clean caliper assembly; inspect parts for wear, rust, scoring, and damage; replace seal, boot, and damaged or worn parts. P 3 Reassemble, lubricate, and reinstall caliper, pads, and related hardware; seat pads, and inspect for leaks. P 1 AUT231 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT231 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT231 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT231 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A,C,D 13.3.11.A AUT231 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT231 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,C,E 13.3.11.A
Code 7837 9 of 22 Content Areas, Titles and Task Statements S014 Clean, inspect, and measure rotor thickness, lateral runout, and thickness variation; determine AUT231 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 C,D,E 13.3.11.A S015 Remove and reinstall rotor. P 1 AUT231 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A S016 Refinish rotor on vehicle; measure final rotor thickness. P 1 AUT231 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A S017 Refinish rotor off vehicle; measure final rotor thickness. P 1 AUT231 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A S018 Retract caliper piston on an integrated parking brake system. P 3 AUT231 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A S019 Install wheel, torque lug nuts, and make final checks and adjustments. P 1 AUT231 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 B,C 13.3.11.A S020 Check brake pad wear indicator system operation; determine necessary action. P 2 AUT231 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 B,C 13.3.11.A T A.B.S. AND TRACTION CONTROL AUT232 T001 Identify and inspect electronic brake control system components,; determine AUT232 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A,C,D,E 13.3.11.A T002 Diagnose poor stopping, wheel lock up, abnormal pedal reel, unwanted application, and notice concerns associated with the electronic brake control system; determine necessary action. P 2 AUT232 NATEF 1.1.11.A,D 1.4.11.D 2.4.8 A,C,F 13.3.11.A T003 Diagnose electronic brake control system control(s) and components by retrieving diagnostic trouble codes and/or using recommended test equipment; determine AUT232 NATEF 1.1.11.A,D.F 1.4.11.D 2.4.8 A,C 13.3.11A T004 Depressurize high pressure components of the electronic brake control system. P 3 AUT232 NATEF 1.1.11.A,D.F 1.4.11.D N/A 13.3.11.A T005 Bleed the electronic brake control system hydraulic circuits. P 1 AUT232 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A T006 T007, diagnose and service electronic brake control system speed sensors (digital and analog), toothed ring (tone wheel), and circuits using a graphing multimeter (GMM/digital storage oscilloscope (DSO (includes output signal, resistance, shorts to voltage/ground, and frequency data). P 1 Diagnose electronic brake control system braking concerns caused by vehicle modifications (tire size, curb, height, final drive ratio, etc.). P 3 AUT232 NATEF 1.1.11.A,D,E,F 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT232 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A T008 Identify traction control/vehicle stability control system components. P 3 AUT232 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11A
Code 7837 10 of 22 Content Areas, Titles and Task Statements T009 Describe the operation of a regenerative braking system. P 3 AUT232 NATEF 1.1.1.A,D 1.4.11.D N/A 13.3.11.A T010 and Diagnose components of electronically controlled suspension systems using a scan tool; determine necessary action. P 3 AUT232 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B.C 13.3.11A T011 Diagnose, inspect, adjust, repair or replace components of electronically controlled steering systems (including sensors, switches, and actuators); initialize system as required P 3 AUT232 NATEF 1.1.11.A,D.E.F 1.4.11D 2.3.11 A,B,C 13.3.11.A T012 Diagnose supplemental restraint system (SRS) concerns; determine AUT232 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A T013 Disarm and enable the airbag system for vehicle service. P 1 AUT232 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A 40 STEERING AND SUSPENSION U WHEELS, TIRES & WHEEL BEARINGS AUT141 U001 Diagnose wheel /tire vibration, shimmy, and noises; determine necessary action. P 2 AUT141 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A U002 Remove, inspect and service or replace front and rear wheel bearings P 1 AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 C,E 13.3.11.A U003 Inspect tire condition; identify tire wear patterns; check and adjust air pressure; determine AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 C,D 13.3.11.A U004 Rotate tires according to manufacturer s recommendations. P 1 AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 C,E 13.3.11.A U005 U006 Diagnose tire pull problem; determine necessary action. P 2 AUT141 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A U007 Dismount, inspect, and remount tire on wheel; Balance wheel and tire assembly (static or dynamic). P 1 AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 E 13.3.11.A U008 Dismount, inspect and remount tire on wheel equipped with tire pressure monitoring system sensor. P 2 AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 E 13.3.11.A U009 Reinstall wheel; torque lug nuts. P 1 AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 E 13.3.11.A U010 Inspect tire and wheel assembly for air loss, perform AUT141 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A U011 Repair tire using internal patch. P 1 AUT141 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A U012 Inspect, diagnose, and calibrate tire pressure monitoring system. P 2 AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 E 13.3.11.A U013 Measure wheel, tire, axle flange, and hub runout; determine necessary action. P 2 Diagnose wheel bearing noise, wheel shimmy, and vibration concerns; determine AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A,C 13.3.11.A AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 E 13.3.11.A
Code 7837 11 of 22 Content Areas, Titles and Task Statements U014 Remove, clean, inspect, repack, and install wheel bearing and replace seals, install hub and adjust bearings. P 1 AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 E 13.3.11.A U015 Replace wheel bearing and race. P 2 AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 E 13.3.11.A U016 Inspect and replace wheel studs. P 1 AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 E 13.3.11.A U017 Remove and reinstall sealed wheel bearing assembly. P 1 AUT141 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 E 13.3.11.A V FUNDAMENTALS OF SUSPENSION SYSTEMS AUT241 V001 Diagnose short and long arm suspension system noises, body sway, and uneven riding height concerns; determine AUT241 NATEF 1.1.11.A,D 1.1.11.A,D 2.3.8 B,C,D 13.3.11.A V002 Diagnose strut suspension system noises, body sway, and uneven ride height concerns; determine AUT241 NATEF 1.1.11.A,D 1.1.11.A,D 2.3.8 A,C 13.3.11.A V003 Remove, inspect, and install upper and lower control arms, bushings, shafts, and rebound bumpers. P 2 AUT241 NATEF 1.1.11.A,D 1.1.11.A,D 2.3.11 A,B,C 13.3.11.A V004 Remove, inspect and install strut rods and bushings. P 2 AUT241 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A V005 Remove, inspect, and install upper and/or lower ball joints. P 1 AUT241 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A V006 Remove, inspect, and install steering knuckle assemblies. P 2 AUT241 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A V007 Remove, inspect, and install short and long arm suspension system coil springs and spring insulators. P 3 AUT241 NATEF 1.1.11.A,D 1.4.11.D 2.5.11 A,D 13.3.11.A V008 Remove, inspect, install, and adjust suspension system torsion bars; inspect mounts. P 3 AUT241 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A V009 Remove, inspect, and install stabilizer bar bushings, brackets, and links. P 2 AUT241 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A V010 Remove, inspect, and install strut cartridge or assembly, strut coil spring, insulators (silencers), and upper strut bearing mount. P 1 AUT241 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A V011 Lubricate suspension and steering systems. P 2 AUT241 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A V012 Remove, inspect, and install leaf springs, leaf spring insulators (silencers), shackles, brackets, bushings, and mounts. P 3 AUT241 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A V013 Inspect, remove, and replace shock absorbers. P 1 AUT241 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,D,E 13.3.11.A V014 Remove, inspect, and service or replace front and rear wheel bearings. P 1 AUT241 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A
Code 7837 12 of 22 Content Areas, Titles and Task Statements V015 Describe the function of the idle speed compensation switch. P 3 AUT241 NATEF 1.1.11.A,D,E,F 1.4.11.D 22.3.11 A,B,C 13.3.11.A W FUNDAMENTALS OF STEERING SYSTEMS AUT242 W001 Identify and interpret suspension and steering system concerns; determine AUT242 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A W002 Research applicable vehicle and service information, such as suspension and steering system operation, vehicle service history, service precautions, and technical service bulletins. P 1 AUT242 NATEF 1.1.11.A,D,E,F 1.4.11.D N/A 13.3.11.A W003 Locate and interpret vehicle and major component identification numbers. P 1 AUT242 NATEF 1.1.11.A,D,E,F 1.4.11.D 2.1.5 A 13.3.11.A W004 Disable and enable supplemental restraint system (SRS). P 1 AUT242 NATEF 11.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A W005 W006 W007 W008 W009 Remove and replace steering wheel; center/time supplemental restraint system (SRS) coil (clock spring). P 1 Diagnose steering column noises, looseness, and binding concerns (including tilt mechanisms); determine necessary action. P 2 Diagnose power steering gear (non rack and pinion) binding, uneven turning effort, looseness, hard steering, and noise concerns; determine necessary action. P 3 Diagnose power steering gear (rack and pinion) binding, uneven turning effort, looseness, hard steering, and noise concerns; determine necessary action. P 2 Inspect steering shaft universal joint(s), flexible coupling(s), collapsible column, lock cylinder mechanism, and steering wheel; perform necessary action. P 2 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT242 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT242 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A W010 Adjust non rack and pinion worm bearing preload and sector lash. P 3 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A W011 Remove and replace rack and pinion steering gear; inspect mounting bushings and brackets. P 2 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A W012 Inspect and replace rack and pinion steering gear inner tie rod ends (sockets) and bellows boots. P 2 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A W013 Determine proper power steering fluid type; inspect fluid levels and condition. P 1 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,B 13.3.11.A W014 Flush, fill, and bleed power steering system. P 2 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,B 13.3.11.A
Code 7837 13 of 22 Content Areas, Titles and Task Statements W015 Diagnose power steering fluid leakage; determine necessary action. P 2 AUT242 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A W016 Remove, inspect, replace, and adjust power steering pump belt. P 1 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A W017 Remove and reinstall power steering pump. P 2 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A W018 Remove and reinstall press fit power steering pump pulley; check pulley and belt alignment. P 2 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A W019 Inspect and replace power steering hoses and fittings. P 2 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.5.11 A,D 13.3.11.A W020 W021 Inspect and replace pitman arm, relay (centerlink/intermediate) rod, idler arm and mountings, and steering linkage damper. P 2 Inspect, replace, and adjust tie rod ends (sockets), tie rod sleeves, and clamps. P 1 AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.5.8 A 13.3.11.A AUT242 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A W022 and diagnose components of electronically controlled steering systems using a scan tool; determine necessary action. P 3 AUT242 NATEF 1.1.11.A,D,E,F 1.4.11.D 2.5.11 A,D 13.3.11.A W023 Inspect and test electric power assist steering P 3 AUT242 NATEF 1.1.11.A,D,E,F 1.4.11.D 2.5.11 A,D 13.3.11.A W024 Identify hybrid vehicle power steering system electrical circuits, service and safety precautions. P 3 AUT242 NATEF 1.1.11.A,D,E,F 1.4.11.D 2.5.11 A,D 13.3.11.A X DRIVABILITY AND ALIGNMENT I AUT341 X001 Diagnose vehicle wander, drift, pull, hard steering, bump steer, memory steer, torque steer, and steering return concerns; determine necessary AUT341 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,D,E 13.3.11.A action. P 1 X002 Perform pre alignment inspection and measure vehicle ride height; perform AUT341 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A X003 Prepare vehicle for wheel alignment on the alignment machine; perform four wheel alignment by checking and adjusting front and rear wheel caster, camber and toe as required; center steering wheel. P 1 AUT341 NATEF 1.1.11.A,D 1.4.11.D 2.9.11 H, I, J 13.3.11.A X004 Check toe out on turns (turning radius); determine necessary action. P 2 AUT342 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A X005 Check SAI (steering axis inclination) and included angle; determine necessary action. P 2 AUT342 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A X006 Check rear wheel thrust angle; determine AUT342 NATEF 1.1.11.A,D 1.4.11.D 2.3.11, 2.5.11 13.3.11.A X007 Check for front wheel setback; determine necessary action. P 2 AUT342 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,D, E 13.3.11.A
Code 7837 14 of 22 Content Areas, Titles and Task Statements X008 Check front and/or rear cradle (subframe) alignment; determine necessary action. P 3 AUT342 NATEF 1.1.11.A,D 1.4.11.D 2.3.5 A,D,E 13.3.11.A 50 ELECTRONICS AND ELECTRICAL Z BASIC AUTOMOTIVE ELECTRICITY AUT151 Z001 Explain the principles of electricity AUT151 NATEF 1.1.11.A,D 1.4.11.D N/A N/A Z002 Describe the action of basic electric circuits AUT151 NATEF 1.1.11.A,D 1.4.11.D N/A N/A Z003 Compare voltage, current, and resistance AUT151 NATEF 1.1.11.A,D 1.4.11.D 2.5.8 B 13.3.11.A Z004 Describe the principles of magnetism and magnetic fields AUT151 NATEF 1.1.11.A,D 1.4.11.D N/A N/A Z005 Identify basic electric and electronic terms and components AUT151 NATEF 1.1.11.A,D,E,F 1.4.11.D N/A N/A Z006 Explain different kinds of automotive wiring AUT151 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A Z007 Perform fundamental electrical tests. AUT151 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A,B 13.3.11.A AA SPECIALIZED ELECTRONIC TRAINING I AUT152 AA01 AA02 AA03 Identify and interpret electrical/electronic system concern; determine Research applicable vehicle and service information, such as electrical/electronic system operation, vehicle service history, service precautions, and technical service bulletins. P 1 Locate and interpret vehicle and major component identification numbers. P 1 AUT152 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT152 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT152 NATEF 1.1.11.A,D,E,F 1.4.11.D 2.1.5 A 13.3.11.A AA04 Diagnose electrical/electronic integrity for series, parallel and seriesparallel circuits using principles of electricity (Ohm's Law). P 1 AUT152 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AA05 Use wiring diagrams during diagnosis of electrical circuit problems. P 1 AUT152 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A 13.3.11.A AA06 Demonstrate the proper use of a digital multimeter (DMM) during diagnosis of electrical circuit problems including source voltage, voltage drop, current flow, and resistance. P 1 AUT152 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A 13.3.11.A AA07 Check electrical circuits with a test light; determine necessary action. P 2 AUT152 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AA08 Check electrical/electronic circuit waveforms; interpret readings and determine needed repairs. P 2 AUT152 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AA09 Check electrical circuits using fused jumper wires; determine necessary action. P 2 AUT152 NATEF 1.1.11.A,D 1.4.11.D 2.5.8 A,B,C,D 13.3.11.A BB SPECIALIZED ELECTRONIC TRAINING II AUT252
Code 7837 15 of 22 Content Areas, Titles and Task Statements BB01 BB02 BB03 Locate shorts, grounds, opens, and resistance problems in electrical/electronic circuits; determine Measure and diagnose the cause(s) of excessive parasitic draw; determine Inspect and test fusible links, circuit breakers, and fuses; determine AUT252 NATEF 1.1.11.A,D,E,F 1.4.11.D 2.5.8 A,B,C,D 13.3.11.A AUT252 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A 13.3.11.A AUT252 NATEF 1.1.11.A,D 1.4.11.D 2.5.8 A,B,C,D 13.3.11.A BB04 Inspect and test switches, connectors, relays, solid state devices, and wires of electrical/electronic circuits; perform AUT252 NATEF 1.1.11.A,D 1.4.11.D 2.5.8 A,B,C,D 13.3.11.A BB05 Repair wiring harnesses (including CAN/BUS systems). P 1 AUT252 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A BB06 Perform solder repair of electrical wiring. P 1 AUT252 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A BB07 Identify location of hybrid vehicle circuit disconnect (service plug) location and safety procedures. P 2 AUT252 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A CC STARTING SYSTEMS AUT253 CC01 Perform battery state of charge test; determine AUT253 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A 13.3.11.A CC02 Perform battery capacity test; confirm proper battery capacity for vehicle application; determine AUT253 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A CC03 Maintain or restore electronic memory functions. P 1 AUT253 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A CC04 Inspect, clean, fill, and/or replace battery, battery cables, connectors, clamps, and hold downs. P 1 AUT253 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A CC05 Perform battery charge. P 1 AUT253 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A 13.3.11.A CC06 Start a vehicle using jumper cables or an auxiliary power supply. P 1 AUT253 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A CC07 CC08 Identify high voltage circuits of electric or hybrid electric vehicle and related safety precautions. P 3 Identify electronic modules, security systems, radios, and other accessories that require reinitialization or code entry following battery disconnect. P 1 AUT253 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT253 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A CC09 Identify hybrid vehicle auxiliary (12v) battery service, repair and test procedures. P 3 AUT253 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A CC10 Perform starter current draw tests; determine AUT253 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A CC11 Perform starter circuit voltage drop tests; determine AUT253 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A CC12 Inspect and test starter relays and solenoids; determine necessary action. P AUT253 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A
Code 7837 16 of 22 Content Areas, Titles and Task Statements CC13 Remove and install starter in a vehicle. P 1 AUT253 NATEF 2.5.11 A,D 13.3.11.A 2.3.11 A,B,C 13.3.11.A CC14 Inspect and test switches, connectors, and wires of starter control circuits; perform necessary action. P 2 AUT253 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A CC15 Differentiate between electrical and engine mechanical problems that cause a slow crank or no crank condition. P 2 AUT253 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A DD CHARGING SYSTEMS AUT254 DD01 Perform charging system output test; determine AUT254 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A 13.3.11.A DD02 Diagnose charging system for the cause of undercharge, no charge, and overcharge conditions. P 1 AUT254 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A DD03 Inspect, adjust, or replace generator (alternator) drive belts, pulleys, and tensioners; check pulley and belt alignment. P 2 AUT254 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A DD04 Remove, inspect, and install generator (alternator). P 1 AUT254 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A DD05 Perform charging circuit voltage drop tests; determine necessary action. P 1 AUT254 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A EE SPECIALIZED ELECTRONIC TRAINING III AUT352 EE01 EE02 EE03 EE04 EE05 EE06 FF ELECTRICAL DIAGNOSTICS I AUT355 FF01 Diagnose the cause of brighter than normal, intermittent, dim, or no light operation; determine FF02 Inspect, replace, and aim headlights and bulbs. P 2 AUT355 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A,C,D 13.3.11.A FF03 Identify system voltage and safety precautions associated with high intensity discharge headlights. P 2 AUT355 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A FF04 Inspect and diagnose incorrect turn signal or hazard light operation; perform necessary action P 2 AUT355 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A FF05 FF06 Inspect and test gauges and gauge sending units for cause of abnormal gauge readings; determine Inspect and test connectors, wires, and printed circuit boards of gauge circuits; determine necessary action. P 3
Code 7837 17 of 22 Content Areas, Titles and Task Statements FF07 FF08 Diagnose the cause of incorrect operation of warning devices and other driver information systems; determine Inspect and test sensors, connectors, and wires of electronic (digital) instrument circuits; determine necessary action. P 3 AUT355 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A,C 13.3.11.A AUT355 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A FF09 Diagnose incorrect horn operation; perform AUT355 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A FF10 Diagnose incorrect wiper operation; diagnose wiper speed control and park problems; perform AUT355 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A FF11 Diagnose incorrect washer operation; perform necessary action. P 2 AUT355 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A FF12 Diagnose incorrect operation of motor driven accessory circuits; determine AUT355 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A FF13 Diagnose incorrect heated glass, mirror, or seat operation; determine necessary action. P 3 FF14 Diagnose incorrect electric lock operation (including remote keyless entry); determine FF15 Diagnose incorrect operation of cruise control systems; determine necessary action. P 3 FF16 Diagnose radio static and weak, intermittent, or no radio reception; determine necessary action. P 3 FF17 Remove and reinstall door panel. P 1 AUT355 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A FF18 Diagnose body electronic system circuits using a scan tool; determine necessary action. P 2 FF19 Check for module communication (including CAN/BUS system) errors using a scan tool. P 2 FF20 Diagnose the cause of false, intermittent, or no operation of anti theft system. P 3 FF21 Describe the operation of keyless entry/remote start systems. P 3 AUT355 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A FF22 Perform software transfers, software updates, or flash reprogramming on electronic modules. P 3 GG ELECTRICAL DIAGNOSTICS II AUT356 GG01 Check for module communication (including CAN/BUS system) errors using a scan tool. P 2
Code 7837 18 of 22 Content Areas, Titles and Task Statements GG02 Diagnose the cause of false, intermittent, or no operation of anti theft system. P 3 GG03 Describe the operation of keyless entry/remote start systems. P 3 AUT355 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A GG04 Perform software transfers, software updates, or flash reprogramming on electronic modules. P 3 60 ENGINE PERFORMANCE HH ELECTRONICS IGNITION SYSTEMS AUT361 HH01 HH02 HH03 Diagnose ignition system related problems such as no starting, hard starting, engine misfire, poor drivability, spark knock, power loss, poor mileage, and emissions concerns; determine Inspect and test ignition primary and secondary circuit wiring and solid state components; test ignition coil(s); perform Inspect and test crankshaft and camshaft position sensor(s); perform necessary action P 1 AUT361 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT361 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT361 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A HH04 Inspect, test and/or replace ignition control module, Powertrain/engine control module; reprogram as necessary. P 2 AUT361 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A II FUEL INJECTION SYSTEMS AUT362 II01 II02 II03 II04 II05 Retrieve and record diagnostic trouble codes, OBD monitor status, and freeze frame data; clear codes when applicable. P 1 Diagnose the causes of emissions or drivability concerns with stored or active diagnostic trouble codes; obtain, graph and interpret scan tool data. P 1 Diagnose emissions or drivability concerns without stored diagnostic trouble codes; determine Check for module communication (including CAN/BUS systems) errors using a scan tool. P 2 Inspect and test computerized engine control system sensors, powertrain/engine control module (PCM/ECM), actuators, and circuits using a graphing multimeter (GMM)/digital storage oscilloscope (DSO); perform AUT362 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT362 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT362 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT362 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A,B 13.3.11.A AUT362 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A
Code 7837 19 of 22 Content Areas, Titles and Task Statements II06 Access and use service information to perform step by step diagnosis. P 1 AUT362 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A II07 II08 II09 II10 Diagnose drivability and emissions problems resulting from malfunctions of interrelated systems (cruise control, security alarms, suspension controls, traction controls, A/C, automatic transmissions, non OEM installed accessories, or similar systems); determine necessary action. P 3 Perform active tests of actuators using a scan tool; determine necessary action. P 1 Describe the importance of running all OBDII monitors for repair verification. P 1 Diagnose hot or cold no starting, hard starting, poor drive ability, incorrect idle speed poor idle, flooding, hesitation, surging, engine misfire, power loss, stalling, poor mileage, dieseling, and emissions problems; determine necessary actions. P 1 AUT362 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT362 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT362 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT362 NATEF 1.1.11.A,D 1.4.11.D 2.5.11 A,B,C 13.3.11.A II11 Check fuel for contaminants and quality; determine necessary action. P 2 AUT362 NATEF 1.1.11 A,D 1.4.11 D N/A 13.3.11 A II12 Inspect and test fuel pumps and pump control systems for pressure, regulation, and volume; perform AUT362 NATEF 1.1.11 A,D 1.4.11 D 2.5.11 A,B,C 13.3.11 A II13 Replace fuel filters. P 2 AUT362 NATEF 1.1.11 A,D 1.4,11 D 2.5.11 A,B,C 13.3.11 A II14 Inspect throttle body, air induction system, intake manifold and gasket for vacuum leaks and/or unmetered air. P 2 AUT362 NATEF 1.1.11 A,D 1.4.11 D 2.5.11 A,B.C 13.3.11 A II15 Inspect and test fuel injectors. P 1 AUT362 NATEF 1.1.11 A,D 1.4.11 D 2.5.11 A,B,C 13.3.11 A II16 Verify idle control operation. P 1 AUT362 NATEF 1.1.11 A,D 1.4.11 D 2.5.11 A,B,C 13.3.11 A II17 Perform exhaust system back pressure test; determine necessary action. P 1 AUT362 NATEF 1.1.11 A,D 1.4.11 D 2.5.11 A,B,C, 13.3.11 A II18 the operation of the turbocharger/supercharger system; determine necessary action. P 3 AUT362 NATEF 1.1.11 A,D 1.4.11 D 2.5.11 A,B,C 13.3.11 A JJ ENGINE TUNE UP AND DRIVABLITY AUT363 JJ01 Identify and interpret engine performance concern; determine necessary action. P 1 AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.5.11 A,B,C 13.3.11.A JJ02 Research applicable vehicle and service information, such as engine management system operation, vehicle service history, service precautions, and technical service bulletins. P 1 AUT363 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A
Code 7837 20 of 22 Content Areas, Titles and Task Statements JJ03 Locate and interpret vehicle and major component identification numbers. P 1 JJ04 Inspect engine assembly for fuel, oil, coolant, and other leaks; determine necessary action. P 2 JJ05 Diagnose abnormal engine noise or vibration concerns; determine necessary action. P 3 JJ06 Diagnose abnormal exhaust color, odor, and sound; determine necessary action. P 2 JJ07 Perform engine absolute (vacuum/boost) manifold pressure tests; determine AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.1.5 A 13.3.11.A AUT363 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT363 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT363 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ08 Perform cylinder power balance test; determine necessary action. P 2 AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ09 Perform cylinder cranking, and running compression tests; determine AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ10 Perform cylinder leakage test; determine AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ11 JJ12 Diagnose engine mechanical, electrical, electronic, fuel, and ignition concerns; determine Prepare 4 or 5 gas analyzer; inspect and prepare vehicle for test, and obtain exhaust readings; interpret readings, and determine necessary action. P 3 AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ13 Verify engine operating temperature; determine AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A,B 13.3.11.A JJ14 Perform cooling system pressure tests; check coolant condition; inspect and test radiator, pressure cap, coolant recovery tank, and hoses; perform AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.8 A,B 13.3.11.A JJ15 Verify correct camshaft timing. P 1 AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ16 Diagnose oil leaks, emissions, and drivability concerns caused by the positive crankcase ventilation (PCV) system; determine necessary action. P 2 AUT363 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A JJ17 Inspect, test and service positive crankcase ventilation (PCV) filter/breather cap, valve, tubes, orifices, and hoses; perform necessary action. P 2 AUT363 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A JJ18 Diagnose emissions and drivability concerns caused by the exhaust gas recirculation (EGR) system; determine AUT363 NATEF 1.1.11.A,D 1.4.11.D N/A 13.3.11.A
Code 7837 21 of 22 Content Areas, Titles and Task Statements JJ19 JJ20 Inspect, test, service and replace components of the EGR system, including EGR tubing, exhaust passages, vacuum/pressure controls, filters and hoses; perform Inspect and test electrical/electronic sensors, controls, and wiring of exhaust gas recirculation (EGR) systems; perform necessary action. P 2 AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ21 Diagnose emissions and drivability concerns caused by the secondary air injection and catalytic converter systems; determine necessary action. P 2 AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ22 Inspect and test mechanical components of secondary air injection AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ23 Inspect and test electrical/electronically operated components and circuits AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ24 Inspect and test catalytic converter efficiency. P 1 AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A JJ25 JJ26 Diagnose emissions and drivability concerns caused by the evaporative emissions control system; determine Inspect and test components and hoses of the evaporative emissions control system; perform AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.5.11 A,D 13.3.11.A AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.5.11 A,D 13.3.11.A JJ27 Interpret diagnostic trouble codes (DTCs) and scan tool data related to the emissions control system; determine AUT363 NATEF 1.1.11.A,D 1.4.11.D 2.5.11 A,D 13.3.11.A KK EMISSIONS SYSTEMS DIAGNOSIS AUT365 KK01 KK02 KK03 KK04 KK05 KK06 90 AUTOMOTIVE CERTIFICATION 90 LL PA STATE SAFETY INSPECTION CERTIFICATION I AUT391 LL01 Inspect the integrity of the exhaust manifold, exhaust pipes, muffler(s), catalytic converter(s), resonator(s), tail pipe(s), and heat shield(s); perform AUT391 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A MM PA STATE SAFETY INSPECTION CERTIFICATION II AUT392 MM01 Inspect the integrity of the exhaust manifold, exhaust pipes, muffler(s), catalytic converter(s), resonator(s), tail pipe(s), and heat shield(s); perform AUT392 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A
Code 7837 22 of 22 Content Areas, Titles and Task Statements NN01 PA STATE SAFETY INSPECTION CERTIFICATION III AUT393 Inspect the integrity of the exhaust manifold, exhaust pipes, muffler(s), NN01 catalytic converter(s), resonator(s), tail pipe(s), and heat shield(s); perform AUT393 NATEF 1.1.11.A,D 1.4.11.D 2.3.11 A,B,C 13.3.11.A