Screwdriving technology Automation Air motors Air tools Stainless Steel Air-Vane Motors up to 1.2 kw / 1.6 Hp corrosion free oilfree sealed The DEPRAG line of air motors merges an attractive cost to power ratio with extensive variation possibilities, such as selection of different drive sizes, or choice of mounting capabilities, to name a few. All motors are hermetically sealed, which eliminates any leakage of exhaust air out of the motor and avoids the influx of dirt particles from the surrounding environment. The air motor series with model number 67- is equipped as standard with a stainless steel housing and drive spindle, which facilitates the use of those motors in the food and chemical industry. An additional feature offered for the 67- motor series is a brake-module, which can easily be integrated. All motors in this design series can be operated without lubrication, however such an oilfree operation will result into a 15 % reduction of power output. For the continued operation in an oilfree environment, we are able to provide motors equipped with vanes D 6400 E 7.2009
made from special materials. Using a motor with lubricated air will increase the motors lifespan and performance due to general physical principles. One condition for both types of operations is the use of a highquality air-preparation system, consisting of a dryer, a filter and if so desired, a lubricator. The motors in the design series 67- can be operated in right-rotation as well as leftrotation. Or, as an alternative, these motors can be automatically reversed, using two 3/2-way valves or one 5/3-way valve. All DEPRAG air-motors are made in accordance with the most stringent DEPRAG quality requirements in regards to lifespan and precision. Please refer to our catalog D 6000 E for further details. We recommend the use of the following relevant accessories: F/R/L, DEPRAG-Oil, and oil-resistant pressure hoses (see our catalog D 3340 E). Motor Variations Material of external parts stainless steel carbide steel Drive Spindle cylindrical with key with collets coned drill chuck with male thread Mounting capabilities mounted on housing OD face-mount using threaded holes in housing flange bracket Integrated Brake-Module Motors, featuring integrated operational- or immobilization brake-modules, are available for motor sizes 2.5 and 3 using a model number suffix of 67-xxxxB. A motor with an integrated brake can be used for different application requirements, such as the consistent and accurate positioning of the drive spindle to an identical final position. An integrated brake can be activated while motor is not under pressure. 5 /16-24 UNF (Motor size 2) 3 /8-24 UNF (Motor size 2.5 and 3) 10 mm 15 mm (Motor size 2) (Motor size 2.5 and 3) Series 67-xxxx G 20 mm (Motor size 2) 26 mm (Motor size 2.5) 27 mm (Motor size 3) On request all motors of motor size 2, 2.5 and 3 are also available with thread spindle, (Type 67-xxxx G). 2
Air-Vane Motor power- and torque characteristics Torque % Power % Stall- Torque ~ 200 % Start- Torque ~150 % Nominal- Power 100 % Nominal- Torque 100 % Power Torque Speed % Nominal-Speed (~ 50 % Speed idling) Speed idling 100 % 3
Technical Data Motor size 0 Type 67-030 67-040 order no. 445115 D 445115 E Nominal-Power W / HP 20 / 0.03 20 / 0.03 Nominal-Speed rpm 650 475 Speed (idling) rpm 1300 950 Nominal-Torque Nm / in.lbs 0.29 / 2.6 0.4 / 3.5 Start-Torque min. Nm / in.lbs 0.44 / 3.9 0.6 / 5.3 Air Consumption m 3 /min / cfm 0.1 / 3 0.1 / 3 Weight kg / lbs 0.16 / 0.3 0.16 / 0.3 Hose I.D. mm / in. 3 / 1 /8 3 / 1 /8 Standard Equipment: 2 Slide connectors (M 5) Optional Equipment: Flange order no. 445187 445187 necessary 3 cylinder-screws order no. 828955 828955 1 Silencer (M 5) order no. 811355 811355 Motor size 0 Type 67-040 R order no. 445462 E Nominal-Power W / HP 30 / 0.04 Nominal-Speed rpm 500 Speed (idling) rpm 1000 Nominal-Torque Nm / in.lbs 0.57 / 5 Start-Torque min. Nm / in.lbs 0.85 / 7.5 Air Consumption m 3 /min / cfm 0.1 / 3 Weight kg / lbs 0.13 / 0.29 Hose I.D. mm / in. 3 / 1 /8 Standard Equipment: 1 Slide connector (M 5) Optional Equipment: Flange order no. 445187 necessary 3 cylinder-screws order no. 828955 4
Motor size 0 M 5 ( left rotation) 8.5 12 4.5 17 R 19 3.5-0.1 13.5 11.5 10 1 Ø 8 e 8 Ø 17 e 8 85 120 Ø 17 M 5 ( ) Exhaust air M 2.5 Ø 12 (hole pattern) Ø 4 k 6 13.5 103 M 5 ( ) Ø 4 k 6 3.5-0.1 11.5 10 Ø 8 e 8 Ø 17 e 8 1 3.5 70.5 (Chucking range) Ø 17 Exhaust air M 2.5 (hole pattern) Ø 6 Ø 8 H 7 3.5 70.5 (Chucking range) Silencer Motor size 0 Flange Ø 20 e 8 1.5 Ø 32 26 5.5 2 3.2 Dimensions in mm 5
Technical Data Motor size 1 Type 67-001 67-011 67-021 67-031 order no. 445127 A 445127 B 445127 C 445127 D Nominal-Power W / HP 80 / 0.11 80 / 0.11 80 / 0.11 80 / 0.11 Nominal-Speed rpm 11000 3500 950 650 Speed (idling) rpm 22000 7000 1900 1300 Nominal-Torque Nm / in.lbs 0.06 / 0.5 0.22 / 1.9 0.8 / 7 1.2 / 11 Start-Torque min. Nm / in.lbs 0.09 / 0.8 0.33/ 2.9 1.2 / 11 1.8 / 16 Air Consumption m 3 /min / cfm 0.23 / 8 0.23 / 8 0.23 / 8 0.23 / 8 Weight kg / lbs 0.2 / 0.4 0.2 / 0.4 0.22 / 0.5 0.22 / 0.5 Hose I.D. mm / in. 4 / 5 /32 4 / 5 /32 4 / 5 /32 4 / 5 /32 Standard Equipment: 3 Slide connectors (M 8 x 0.75) Motor size 1 Series 104- Type 104-010-1 104-110-1 104-210-1 104-310-1 with Collet order no. 302929 A 302929 B 302929 C 302929 D Nominal-Power W / HP 80 / 0.11 80 / 0.11 80 / 0.11 80 / 0.11 Nominal-Speed rpm 11000 3500 950 650 Speed (idling) rpm 22000 7000 1900 1300 Nominal-Torque Nm / in.lbs 0.06 / 0.5 0.22 / 1.9 0.8 / 7 1.2 / 11 Start-Torque min. Nm / in.lbs 0.09 / 0.8 0.33 / 2.9 1.2 / 11 1.8 /16 Air Consumption m 3 /min / cfm 0.23 / 8 0.23 / 8 0.23 / 8 0.23 / 8 Length L mm / in. 96 / 3 25 /32 96 / 3 25 /32 105 / 4 1 /8 105 / 4 1 /8 Weight kg / lbs 0.2 / 0.4 0.2 / 0.4 0.22 / 0.5 0.22 / 0.5 Air Hose I.D. mm / in. 4 / 5 /32 4 / 5 /32 4 / 5 /32 4 / 5 /32 Drilling into Steel up to mm / in. 3 / 1 /8 3 / 1 /8 3 / 1 /8 Drilling into Aluminium up to mm / in. 3 / 1 /8 3 / 1 /8 3 / 1 /8 3 / 1 /8 Drive shaft and collet no stainless steel Standard Equipment: 2 Slide connectors (M 8 x 0.75) Optional Equipment: Motor size 1 Series 104- Flange order no. 445181 necessary 3 cylinder-screws order no. 823701 Bracket order no. 445180 necessary 3 cylinder-screws order no. 831728 Collet ø 2 mm order no. 314693 ø 3 mm order no. (standard) ø 4 mm order no. 302474/1 ø 3 /32 (2.35 mm) order no. 314694 ø 1 /8 (3.175 mm) order no. 314407 6
4 4.5 40 30 Ø 15 (hole pattern) Motor size 1 left rotation 10.5 15.5 13.5 13 12 Ø 13 e 8 Ø 22 e 9 105 M 3 3 6 5-0.1 M8 x 0.75 (Exhaust Air) M8 x 0.75 Ø 6 k6 3 50 (Chucking range) 5 Flange Ø 13 H8 5 Bracket 25-0.2 Ø 13 H8 20 Ø 5.5 30 40 50 Motor size 1 Series 104-26 L ca. 10 M8 x 0.75 () 20 Ø 13 e 8 Ø 10 Ø 22 e 9 M8 x 0.75 (Exhaust Air) 2 3 50 (Chucking range) Collet Ø 3 mm (Standard Equipment) Dimensions in mm 7
Technical Data Motor size 2 Type 67-002 67-012 67-022 67-032 67-042 67-052 67-2521 order no. 444550 A 444550 H 444550 B 444550 C 444550 D 444550 E 444550 F Nominal-Power W / HP 120 / 0.16 120 / 0.16 120 / 0.16 120 / 0.16 120 / 0.16 120 / 0.16 90 / 0.12 1 ) Nominal-Speed rpm 11000 2750 1800 700 450 300 50 1 ) Speed (idling) rpm 22000 5500 3600 1400 900 600 100 Nominal-Torque Nm / in.lbs 0.10 / 0.9 0.4 / 3.5 0.6 / 5.3 1.6 / 14 2.5 / 22 3.8 / 34 5 / 44*) Start-Torque min. Nm / in.lbs 0.15 / 1.3 0.6 / 5.3 0.9 / 8 2.4 / 21 3.8 / 34 5 / 44 *) 5 / 44*) Air Consumption m 3 /min / cfm 0.3 / 11 0.3 / 11 0.3 / 11 0.3 / 11 0.3 / 11 0.3 / 11 0.3 / 11 Weight kg / lbs 0.35 / 0.8 0.35 / 0.8 0.35 / 0.8 0.4 / 0.9 0.4 / 0.9 0.4 / 0.9 0.45 / 1 Hose I.D. mm / in. 6 / 1 /4 6 / 1 /4 6 / 1 /4 6 / 1 /4 6 / 1 /4 6 / 1 /4 6 / 1 /4 *) max. admissible Torque 1) Theoretical values for issuing the power diagram Motor size 2 Series 104- Type 104-020-1 104-120-1 104-220-1 104-320-1 104-420-1 104-520-1 with Collet order no. 302916 A 302916 B 302916 C 302916 D 302916 E 302916 F Series 104- Type 104-120 104-220 104-320 104-420 104-520 for Drill-Chuck order no. 302912 B 302912 C 302912 D 302912 E 302912 F Nominal-Power W / HP 170 / 0.23 170 / 0.23 170 / 0.23 170 / 0.23 170 / 0.23 170 / 0.23 Nominal-Speed rpm 12000 3000 2000 750 500 330 Speed (idling) rpm 24000 6000 4000 1500 1000 660 Nominal-Torque Nm / in.lbs 0.13 /1.1 0.5 / 4.4 0.8 / 7 2.1 / 18 3.2 / 28 4.9 / 43 Start-Torque min. Nm / in.lbs 0.19 / 1.7 0.8 / 7 1.2 / 10 3.2 / 28 4.8 / 42 5 / 44 *) Air Consumption m 3 /min / cfm 0.3 / 11 0.3 / 11 0.3 / 11 0.3 / 11 0.3 / 11 0.3 / 11 Weight kg / lbs 0.38 / 0.84 0.38 / 0.84 0.38 / 0.84 0.43 / 0.95 0.43 / 0.95 0.43 / 0.95 Hose I.D. mm / in. 6 / 1 /4 6 / 1 /4 6 / 1 /4 6 / 1 /4 6 / 1 /4 6 / 1 /4 Drilling into Steel up to mm / in. 3 / 1 /8 4 / 5 /32 4 / 5 /32 4 / 5 /32 4 / 5 /32 Drilling into Aluminium up to mm / in. 4 / 5 /32 5 / 13 /64 6 / 15 /64 6 / 15 /64 6 / 15 /64 6 / 15 /64 *) max. admissible Torque External parts no stainless steel Optional Equipment: Motor size 2 Series 104- Flange order no. 444569 necessary 4 cylinder-screws order no. 823216 Bracket order no. 444572 necessary 4 cylinder-screws order no. 823216 Design group: 1 Air-Connection (right- or left-rotation) 1 Hose nozzle ( 1 /8 ) order no. 823237 2 Silencers ( 1 /8 ) order no. 823236 Design group: 2 Air-Connections (right- and left-rotation) 2 Hose nozzles ( 1 /8 ) order no. 823237 1 Silencer ( 1 /8 ) order no. 823236 Collet ø 3 mm order no. 312681 ø 4 mm order no. 312684 ø 5 mm order no. 312686 ø 6 mm order no. (standard) ø 1 /8 (3.175 mm) order no. 312682 ø 1 /4 (6.35 mm) order no. 312689 Quick change chuck Range 0-6 mm / B 10 order no. 804664 8
F5 E 6 E 3 E 4 left rotation D 5 A 1 A 2 A 3 A 4 - Chucking range C 2 (h9) Motor size 2 D1 D1 D 3 D 4 B 2 (k6) B 3 (e8) B 1 (e8) C 4 C 1 C 3 D 2 - Exhaust Air E1 Flange Bracket F8 E5 E2 B3 (H8) F5 B3 (H8) Silencer F9 F4 F1 (-0.2) F 2 F 3 F7 F6 Motor Dimensions of Motor (mm) size Type A1 A2 A3 A4 B1 B2 B3 C1 C2 C3 C4 D1 D2 D3 D4 D5 67-002 67-012 67-022 135.5 17 117 46.5 27 8 13 8.8 2 21 M4 1 /8 1 /8 8 4 14 2 67-032 67-042 67-052 148 17 129.5 59 27 8 13 8.8 2 21 M4 1 /8 1 /8 8 4 14 67-2521 160 17 142 71.5 27 8 13 8.8 2 21 M4 1 /8 1 /8 8 4 14 Motor Dimensions on Flange (mm) Dimensions on Bracket (mm) size Type B3 E1 E2 E3 E4 E5 E6 B3 F1 F2 F3 F4 F5 F6 F7 F8 F9 67-002 67-012 67-022 13 5 3 50 40 29 4.5 13 25 20 30 5.5 4.5 40 50 29 2.5 2 67-032 67-042 67-052 13 5 3 50 40 29 4.5 13 25 20 30 5.5 4.5 40 50 29 2.5 67-2521 13 5 3 50 40 29 4.5 13 25 20 30 5.5 4.5 40 50 29 2.5 ca. 33 22 118-Chucking range 154 Motor size 2 Series 104- Collet ø 6 mm (Standard Equipment) ø 12 ø 25 d10 1/4 ca. 59 ø 30 Exhaust Hose order no. 806112 ø 21 x ø 25 mm (please advise required length) necessary 1 Seal Ring order no. 823221 Exhaust Air approx. 2 m Drill-Chuck 0.5-6 mm order no. 804655 Spindle with cone for drill-chuck B10 DIN238 47 22 14 1/4 1/2 Dimensions in mm Exhaust Connection cpl. order no. 302923 A for corresponding exhaust filter/silencer see leaflet D 3340 E. 9
Technical Data Motor size 2.5 Type 67-0025 67-0125 67-0225 67-0725 67-0325 67-0425 67-04251 67-24251 order no. 444500 B 444500 C 444500 D 444500 F 444500 E 444500 A 444500 G 444500 H Nominal-Power W / HP 200 / 0.27 200 / 0.27 200 / 0.27 200 / 0.27 200 / 0.27 200 / 0.27 100 / 0.13 180 / 0.24 1 ) Nominal-Speed rpm 7250 2300 1200 700 350 160 90 25 1 ) Speed (idling) rpm 14500 4600 2400 1400 700 320 180 50 Nominal-Torque Nm / in.lbs 0.26 / 2.3 0.8 / 7.1 1.6 / 14 2.7 / 24 5.4 / 48 12 / 106 10.5 / 93 20 / 177*) Start-Torque min. Nm / in.lbs 0.4 / 3.5 1.2 / 11 2.4 / 21 4.1 / 36 8.2 / 73 18 / 159 15 / 133 20 / 177*) Air Consumption m 3 /min / cfm 0.37 / 13 0.37 / 13 0.37 / 13 0.37 / 13 0.37 / 13 0.37 / 13 0.27 / 9 0.37 / 13 Weight kg / lbs 0.7 / 1.5 0.75 / 1.6 0.75 / 1.6 0.85 / 1.9 0.85 / 1.9 0.85 / 1.9 0.85 / 1.9 0.95 / 2.1 Hose I.D. mm / in. 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 *) max. admissible Torque 1) Theoretical values for issuing the power diagram Motor size 3 Type 67-003 67-013 67-023 67-073 67-083 67-093 67-0931 67-2931 order no. 444560 A 444560 B 444560 C 444560 D 444560 E 444560 F 444560 G 444560 H Nominal-Power W / HP 300 / 0.40 300 / 0.40 300 / 0.40 300 / 0.40 300 / 0.40 300 / 0.40 130 / 0.17 280/0.37 1 ) Nominal-Speed rpm 7250 2300 1200 700 300 170 90 25 1 ) Speed (idling) rpm 14500 4600 2400 1400 600 350 180 50 Nominal-Torque Nm / in.lbs 0.4 / 3.5 1.2 / 11 2.4 / 21 4.1 / 36 9.6 / 85 16.9 / 149 13.8 / 122 36 / 319*) Start-Torque min. Nm / in.lbs 0.6 / 5.3 1.9 / 17 3.6 / 32 6.1 / 54 14.3 / 126 25.3 / 224 21 / 186 36 / 319*) Air Consumption m3/min / cfm 0.47 / 17 0.47 / 17 0.47 / 17 0.47 / 17 0.47 / 17 0.47 / 17 0.28 / 10 0.47 / 17 Weight kg / lbs 1.0 / 2.2 1.05 / 2.3 1.05 / 2.3 1.10 / 2.4 1.15 / 2.5 1.15 / 2.5 1.15 / 2.5 1.25 / 2.7 Hose I.D. mm / in. 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 *) max. admissible Torque 1) Theoretical values for issuing the power diagram Optional Equipment: Motor size 2.5 Motor size 3 Flange order no. 444530 444610 necessary 4 cylinder-screws order no. 823216 823139 Bracket order no. 444539 444611 necessary 4 cylinder-screws order no. 823216 823139 Design group: 1 Air-Connection (right- or left-rotation) 1 Hose-nozzle order no. 823238 ( 1 /8 ) 410541 ( 1 /4 ) 1 Silencer order no. 802675 ( 1 /8 ) 802673 ( 1 /4 ) 1 Silencer order no. 802673 ( 1 /4 ) 802673 ( 1 /4 ) Design group: 2 Air-Connections (right- and left-rotation) 2 Hose-nozzles order no. 823238 ( 1 /8 ) 410541 ( 1 /4 ) 1 Silencer order no. 802673 ( 1 /4 ) 802673 ( 1 /4 ) 10
Motor size 2.5 left rotation D 5 A 1 A 2 A 3 A 4 - Chucking range C 2 (h9) Motor size 3 D1 D1 D 3 D 4 B 2 (k6) B 3 (e8) B 1 (e8) C 4 C 1 C 3 D 2 - Exhaust Air E 1 Flange B 3 (e8) E 6 E 3 E 4 Silencer E 2 E 5 F 5 Bracket F 1 (-0.2) F 2 F 5 F 4 F 3 F 6 F 7 Motor Dimensions of Motor (mm) size Type A1 A2 A3 A4 B1 B2 B3 C1 C2 C3 C4 D1 D2 D3 D4 D5 67-0025 67-0125 67-0225 151 23 127 64 38 10 20 11.2 3 30 M4 1 /8 1 /4 8 7 19 2.5 67-0725 67-0325 67-0425 67-04251 167 23 143 80 38 10 20 11.2 3 30 M4 1 /8 1 /4 8 7 19 67-24251 183 23 159 96 38 10 20 11.2 3 30 M4 1 /8 1 /4 8 7 19 67-003 67-013 67-023 171 27 143 66 42 12 24 13.5 4 34 M5 1 /4 1 /4 11 7 20 3 67-073 187 27 159 82 42 12 24 13.5 4 34 M5 1 /4 1 /4 11 7 20 67-083 67-093 67-0931 191 30 159 82 42 14 24 16 5 34 M5 1 /4 1 /4 11 7 20 67-2931 196 30 164 82 42 14 24 16 5 34 M5 1 /4 1 /4 11 7 20 Motor Dimensions on Flange (mm) Dimensions on Bracket (mm) size Type B3 E1 E2 E3 E4 E5 E6 F1 F2 F3 F4 F5 F6 F7 67-0025 67-0125 67-0225 20 5 5.8 60 50 5.5 17 30 20 30 6.6 4.5 45 55 2.5 67-0725 67-0325 67-0425 67-04251 20 5 5.8 60 50 5.5 17 30 20 30 6.6 4.5 45 55 67-24251 20 5 5.8 60 50 5.5 17 30 20 30 6.6 4.5 45 55 67-003 67-013 67-023 24 6 6.8 65 55 5.5 21 30 20 30 6.6 4.5 50 60 3 67-073 24 6 6.8 65 55 5.5 21 30 20 30 6.6 4.5 50 60 67-083 67-093 67-0931 24 6 6.8 65 55 5.5 21 30 20 30 6.6 4.5 50 60 67-2931 24 6 6.8 65 55 5.5 21 30 20 30 6.6 4.5 50 60 11
Technical Data Motor size 2.5 with brake Type 67-0025 B 67-0125 B 67-0225 B 67-0725 B 67-0325 B 67-0425 B order no. 445760 B 445760 C 445760 D 445760 F 445760 E 445760 A Nominal-Power W / HP 200 / 0.27 200 / 0.27 200 / 0.27 200 / 0.27 200 / 0.27 200 / 0.27 Nominal-Speed rpm 7250 2300 1200 700 350 160 Speed (idling) rpm 14500 4600 2400 1400 700 320 Nominal-Torque Nm / in.lbs 0.26 / 2.3 0.8 / 7.1 1.6 / 14 2.7 / 24 5.4 / 48 12 / 106 Start-Torque min. Nm / in.lbs 0.4 / 3.5 1.2 / 11 2.4 / 21 4.1 / 36 8.2 / 73 18 / 159 Stall-Torque Nm / in.lbs 0.52 / 4.6 1.6 / 14.2 3.2 / 28 5.4 / 48 10.8 / 96 20 /177*) Brake-Torque Nm / in.lbs 1 / 9 3.4 / 30 6.7 / 59 11.8 / 104 22.9 / 203 44.4 / 393 Air Consumption m 3 /min / cfm 0.37 / 13 0.37 / 13 0.37 / 13 0.37 / 13 0.37 / 13 0.37 / 13 Weight kg / lbs 1 / 2.2 1.05 / 2.3 1.05 / 2.3 1.15 / 2.5 1.15 / 2.5 1.15 / 2.5 Hose I.D. mm / in. 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 *) max. admissible Torque Motor size 3 with brake Type 67-003 B 67-013 B 67-023 B 67-073 B 67-083 B 67-093 B order no. 445762 A 445762 B 445762 C 445762 D 445762 E 445762 F Nominal-Power W / HP 300 / 0.4 300 / 0.4 300 / 0.4 300 / 0.4 300 / 0.4 300 / 0.4 Nominal-Speed rpm 7250 2300 1200 700 300 170 Speed (idling) rpm 14500 4600 2400 1400 600 350 Nominal-Torque Nm / in.lbs 0.4 / 3.5 1.2 / 11 2.4 / 21 4.1 / 36 9.6 / 85 16.9 / 149 Start-Torque min. Nm / in.lbs 0.6 / 5.3 1.9 / 17 3.6 / 32 6.1 / 54 14.3 / 126 25.3 / 224 Stall-Torque Nm / in.lbs 0.8 / 7 2.4 / 21 4.8 / 42 8.2 / 72 19.2 / 170 33.8 / 299 Brake-Torque Nm / in.lbs 1 / 9 3.4 / 30 6.7 / 59 11.8 / 104 20.6 / 182 40 / 354 Air Consumption m 3 /min / cfm 0.47 / 17 0.47 / 17 0.47 / 17 0.47 / 17 0.47 / 17 0.47 / 17 Weight kg / lbs 1.35 / 3 1.4 / 3.1 1.4 / 3.1 1.45 / 3.2 1.5 / 3.3 1.5 / 3.3 Hose I.D. mm / in. 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 Optional Equipment: Motor size 2.5 Motor size 3 Flange order no. 444530 444610 necessary 4 cylinder-screws order no. 823216 823139 Brake order no. 444539 444611 necessary 4 cylinder-screws order no. 823216 823139 Design group: 1 Air-Connection (right- or left-rotation) 1 Hose-nozzle order no. 823238 ( 1 /8 ) 410541 ( 1 /4 ) 1 Silencer order no. 802675 ( 1 /8 ) 802673 ( 1 /4 ) 1 Silencer order no. 802673 ( 1 /4 ) 802673 ( 1 /4 ) Design group: 2 Air-Connections (right- and left-rotation) 2 Hose-nozzles order no. 823238 ( 1 /8 ) 410541 ( 1 /4 ) 1 Silencer order no. 802673 ( 1 /4 ) 802673 ( 1 /4 ) 12
Motor size 2.5 with brake left rotation D 5 A 1 A 2 A 3 A 4 - Chucking range A 5 Motor size 3 with brake C 2 (h9) D1 D1 D 3 D 4 B 2 (k6) B 3 (e8) B 1 (e8) B 4 C 4 C 1 C 3 D 2 - Exhaust Air E 1 Air supply for control of motor brake Flange B 3 (e8) E 6 E 3 E 4 Silencer E 2 E 5 F 5 Bracket F 1 (-0.2) F 2 F 5 F 4 F 3 F 6 F 7 Motor size 2.5 3 Dimensions of Motor (mm) Type A1 A2 A3 A4 A5 B1 B2 B3 B4 C1 C2 C3 C4 D1 D2 D3 D4 D5 67-0025 B 67-0125 B 67-0225 B 194 23 170 64 98 38 10 20 M5 11.2 3 30 M4 1 /8 1 /4 8 7 19 67-0725 B 67-0325 B 67-0425 B 210 23 186 80 98 38 10 20 M5 11.2 3 30 M4 1 /8 1 /4 8 7 19 67-003 B 67-013 B 67-023 B 215 27 187 66 110 42 12 24 M5 13.5 4 34 M5 1 /4 1 /4 11 7 20 67-073 B 231 27 203 82 110 42 12 24 M5 13.5 4 34 M5 1 /4 1 /4 11 7 20 67-083 B 67-093 B 235 30 203 82 110 42 14 24 M5 16 5 34 M5 1 /4 1 /4 11 7 20 Motor size 2.5 3 Dimensions on Flange (mm) Dimensions on Bracket (mm) Type B3 E1 E2 E3 E4 E5 E6 F1 F2 F3 F4 F5 F6 F7 67-0025 B 67-0125 B 67-0225 B 20 5 5.8 60 50 5.5 17 30 20 30 6.6 4.5 45 55 67-0725 B 67-0325 B 67-0425 B 20 5 5.8 60 50 5.5 17 30 20 30 6.6 4.5 45 55 67-003 B 67-013 B 67-023 B 24 6 6.8 65 55 5.5 21 30 20 30 6.6 4.5 50 60 67-073 B 24 6 6.8 65 55 5.5 21 30 20 30 6.6 4.5 50 60 67-083 B 67-093 B 24 6 6.8 65 55 5.5 21 30 20 30 6.6 4.5 50 60 13
Technical Data Motor size 2.5 with Reduction Gearing Type 67-1325 67-1425 order no. 445184 A 445184 B Nominal-Power W / HP 200 / 0.27 200 / 0.27 Nominal-Speed rpm 55 30 Speed (idling) rpm 110 60 Nominal-Torque Nm / in.lbs 33 / 292 72 / 637 Start-Torque min. Nm / in.lbs 49.5 / 438 108 / 956*) Air Consumption m 3 /min / cfm 0.37 / 13 0.37 / 13 Weight kg / lbs 3 / 6.6 3 / 6.6 Hose I.D. mm /in. 10 / 3 /8 10 / 3 /8 *) max. admissible Torque Offset Gearing and drive shaft no stainless steel Motor size 3 with Reduction Gearing Type 67-173 67-183 order no. 445183 A 445183 B Nominal-Power W / HP 300 / 0.4 300 / 0.4 Nominal-Speed rpm 115 50 Speed (idling) rpm 230 100 Nominal-Torque Nm / in.lbs 24 / 212 57 / 504 Start-Torque min. Nm / in.lbs 36 / 319 85.5 / 757 Air Consumption m 3 /min / cfm 0.47 / 17 0.47 / 17 Weight kg / lbs 3.3 / 7.3 3.3 / 7.3 Hose I.D. mm / in. 10 / 3 /8 10 / 3 /8 Offset Gearing and drive shaft no stainless steel Optional Equipment: Motor size 2.5 Motor size 3 Bracket order no. 445186 445186 necessary 4 cylinder-screws order no. 800477 800477 Design group: 1 Air-Connection (right- or left-rotation) 1 Hose-nozzle order no. 823238 ( 1 /8 ) 410541 ( 1 /4 ) 1 Silencer order no. 802675 ( 1 /8 ) 802673 ( 1 /4 ) 1 Silencer order no. 802673 ( 1 /4 ) 802673 ( 1 /4 ) Design group: 2 Air-Connections (right- and left-rotation) 2 Hose-nozzle order no. 823238 ( 1 /8 ) 410541 ( 1 /4 ) 1 Silencer order no. 802673 ( 1 /4 ) 802673 ( 1 /4 ) 14
Motor size 2.5 with Reduction Gearing left rotation D1 D 5 D1 D 4 B 2 (k6) A 1 A 3 A 4 A 5 A 2 Motor size 3 with Reduction Gearing C 5 C 2 (h9) B 3 B 1 C 1 C 4 D 2 - Exhaust Air D 3 C 3 Bracket F 5 Silencer F 2 F 1 (-0.2) F 4 F 3 F 5 F 6 F 7 Motor Dimensions of Motor (mm) size Type A1 A2 A3 A4 A5 B1 B2 B3 C1 C2 C3 C4 C 5 D1 D2 D3 D4 D5 2.5 67-1325 67-1425 266 45 56 15 143 38 19 74 21.5 6 99 85 M6 G 1 /8 G 1 /4 8 7 19 3 67-173 67-183 282 45 56 15 159 42 19 74 21.5 6 99 85 M6 G 1 /4 G 1 /4 11 7 20 Motor Dimensions on Bracket (mm) size Type F1 F2 F3 F4 F5 F6 F7 2.5 67-1325 67-1425 70 35 50 11 9.5 92 110 3 67-173 67-183 70 35 50 11 9.5 92 110 15
Technical Data Motor size 2.5 Series 104- Type 104-0250-1 104-1250-1 104-2250-1 104-7250-1 104-3250-1 104-4250-1 with Collet order no. 302897 A 302897 B 302897 C 302897 D 302897 E 302897 F Series 104- Type 104-0250 104-1250 104-2250 104-7250 104-3250 104-4250 for Drill-Chuck order no. 302900 A 302900 B 302900 C 302900 D 302900 E 302900 F Nominal-Power W / HP 250 / 0.33 250 / 0.33 250 / 0.33 250 / 0.33 250 / 0.33 250 / 0.33 Nominal-Speed rpm 8500 2400 1250 700 350 175 Speed (idling) rpm 17000 4800 2500 1400 700 350 Nominal-Torque Nm / in.lbs 0.28 / 2.5 1 / 9 1.9 / 17 3.4 / 30 6.8 / 60 13.6 / 125 Start-Torque min. Nm / in.lbs 0.42 / 3.7 1.5 / 13 2.8 / 25 5.1 / 45 10.2 / 90 20.4 / 180 Air Consumption m 3 /min / cfm 0.35 / 12 0.35 / 12 0.35 / 12 0.35 / 12 0.35 / 12 0.35 / 12 Length L1 mm / in. 141 / 5 9 /16 141 / 5 9 /16 141 / 5 9 /16 157 / 6 3 /16 157 / 6 3 /16 157 / 6 3 /16 Length L2 mm / in. 64 / 2 33 /64 64 / 2 33 /64 64 / 2 33 /64 80 / 3 5 /32 80 / 3 5 /32 80 / 3 5 /32 Weight kg / lbs 0.8 / 1.8 0.8 / 1.8 0.8 / 1.8 0.9 / 2 0.9 / 2 0.9 / 2 Air Hose I.D. mm / in. 6 / 1 /4 6 / 1 /4 6 / 1 /4 6 / 1 /4 6 / 1 /4 6 / 1 /4 Drilling into Steel up to mm / in. 4 / 5 /32 6 / 15 /64 8 / 5 /16 10 / 25 /64 10 / 25 /64 *) Drilling into Aluminium up to mm / in. 6 / 15 /64 6 / 15 /64 8 / 5 /16 10 / 25 /64 *) for stainless steell and drive shaft not stainless steel Motor size 3 Series 104- Type 104-030 104-130 104-230 104-730 for Drill-Chuck order no. 302937 A 302937 B 302937 C 302937 D Nominal-Power W / HP 400 / 0.54 400 / 0.54 400 / 0.54 400 / 0.54 Nominal-Speed rpm 8500 2400 1250 700 Speed (idling) rpm 17000 4800 2500 1400 Nominal-Torque Nm / in.lbs 0.44 / 3.9 1.6 / 14 3 / 26 5.4 / 48 Start-Torque min. Nm / in.lbs 0.66 / 5.8 2.4 / 21 4.5 / 40 8.1 / 72 Air Consumption m 3 /min / cfm 0.42 / 15 0.42 / 15 0.42 / 15 0.42 / 15 Length L1 mm / in. 150 / 5 29 /32 150 / 5 29 /32 150 / 5 29 /32 166 / 6 17 /32 Length L2 mm / in. 64 / 2 17 /32 64 / 2 17 /32 64 / 2 17 /32 80 / 3 5 /32 Weight kg / lbs 0.82 / 1.8 0.82 / 1.8 0.82 / 1.8 0.92 / 2 Air Hose I.D. mm / in. 10 / 3 /8 10 / 3 /8 10 / 3 /8 10 / 3 /8 Drilling into Steel up to mm / in. 4 / 5 /32 6 / 15 /64 8 / 5 /16 Drilling into Aluminium up to mm / in. 6 / 15 /64 6 / 15 /64 8 / 5 /16 10 / 25 /64 and drive shaft not stainless steel 16 Optional Equipment: Motor size 2.5 Motor size 3 Series 104- Series 104- Flange order no. 444530 444530 necessary 4 cylinder-screws order no. 823216 823216 Bracket order no. 444539 444539 necessary 4 cylinder-screws order no. 823216 823216 Collet ø 3 mm order no. 312681 ø 4 mm order no. 312684 ø 5 mm order no. 312686 ø 6 mm order no. (standard) ø 1 /8 (3.175 mm) order no. 312682 ø 1 /4 (6.35 mm) order no. 312689 Quick change chuck Range 0.5-8 mm / B 12 order no. 804661 804661 Quick change chuck not permitted for type 104-0250 / 104-030
Motor size 2.5 Series 104- Motor size 3 Series 104-5 ø 5.5 4,5 Flange / Bracket ø60-0.4 ø20 e8 ø17 ø20 H8 5.8 ø 50 30-0.2 ø20 H8 20 ø 6.6 4.5 45 30 55 104-0250-1 to 104-4250-1 Collet ø 6 mm (Standard Equipment) ca. 28 17 0.8 ø12 L2-Chucking range ø20 e8 ø 38 e8 L 1 1/4 M 35 x 0.75 Air connection Exhaust Air M 4-4 deep ø 30 104-0250 to 104-4250 ca. 66 0.8 L2-Chucking range L 1 M 4-4 deep 104-030 to 104-730 Drill-Chuck 0.8-10 mm order no. 804650 ø 34 ø20 e8 ø 38 e8 Spindel mit Bohrfutterkegel B12 DIN238 Spindle with cone for drill-chuck B12 DIN 238 1/4 M 35 x 0.75 ø 38 Air connection Exhaust Air Exhaust Hose cpl. order no. 313179 A ø 30 15 28 Air Hose 6 x 12 2 m long 806095 Exhaust Hose 23 x 28 0.75 m long 806110 approx. 2 m 1/2 62 30 18 1/4 Exhaust Connection cpl. order no. 388378 A for corresponding exhaust filter / silencer see leaflet D 3340 E. Dimensions in mm 17
Technical Data Motor size 6 Type 67-006 67-016 67-026 67-036 67-046 67-056 67-066 67-0661 order no. 444570 A 444570 H 444570 B 444570 C 444570 D 444570 E 444570 F 444570 G Type - 67-016B16 67-026B16 67-036B16 67-046B16 67-056B16 67-066B16 67-0661B16 for Drill-Chuck order no. - 445353 H 445353 B 445353 C 445353 D 445353 E 445353 F 445353 G Nominal-Power W / HP 600 / 0.8 600 / 0.8 600 / 0.8 600 / 0.8 600 / 0.8 600 / 0.8 600 / 0.8 300 / 0.4 Nominal-Speed rpm 7000 1750 1350 850 315 240 150 75 Speed (idling) rpm 14000 3500 2700 1700 630 480 300 150 Nominal-Torque Nm / in.lbs 0.82 / 7 3.2 / 28 4.2 / 37 6.7 / 59 18 / 159 24 / 212 38 / 336 38 / 336 Start-Torque min. Nm / in.lbs 1.23 / 11 4.8 / 42 6.4 / 57 10.1 / 89 27 / 239 36 / 319 57 / 504 57 / 504 Air Consumption m 3 /min / cfm 0.85 / 30 0.85 / 30 0.85 / 30 0.85 / 30 0.85 / 30 0.85 / 30 0.85 / 30 0.55 / 19 Weight kg / lbs 2 / 4.4 2.1 / 4.6 2.1 / 4.6 2.1 / 4.6 2.2 / 4.8 2.3 / 5.1 2.3 / 5.1 2.3 / 5.1 Hose I.D. mm / in. 12 / 1 /2 12 / 1 /2 12 / 1 /2 12 / 1 /2 12 / 1 /2 12 / 1 /2 12 / 1 /2 12 / 1 /2 Drilling into Steel up to mm / in. 3 / 1 /8 5 / 13 /64 8 / 5 /16 13 / 33 /64 13 / 33 /64 13 / 33 /64 13 / 33 /64 Drilling into Aluminium up to mm / in. 3 / 1 /8 5 / 13 /64 8 / 5 /16 13 / 33 /64 13 / 33 /64 13 / 33 /64 13 / 33 /64 Motor size 8 Type 67-008 67-028 67-038 67-048 67-058 67-0581 order no. 444580 A 444580B 444580 C 444580 D 444580 E 444580 F Nominal-Power W / HP 1200 / 1.6 1200 / 1.6 1200 / 1.6 1200 / 1.6 1200 / 1.6 700 / 0.9 Nominal-Speed rpm 4500 1250 550 350 160 100 Speed (idling) rpm 9000 2500 1100 700 320 200 Nominal-Torque Nm / in.lbs 2.5 / 22 9.2 / 81 21 / 186 33 / 292 71 / 628 66.9 / 592 Start-Torque min. Nm / in.lbs 3.8 / 34 13.7 / 121 31 / 274 49 / 434 107 / 947 100 / 885 Air Consumption m 3 /min / cfm 1.6 / 56 1.6 / 56 1.6 / 56 1.6 / 56 1.6 / 56 1.1 / 39 Weight kg / lbs 5.5 / 12 5.5 / 12 5.5 / 12 5.6 / 12 5.6 / 12 5.6 / 12 Hose I.D. mm / in. 19 / 3 /4 19 / 3 /4 19 / 3 /4 19 / 3 /4 19 / 3 /4 19 / 3 /4 Optional Equipment: Motor size 6 Motor size 8 Flange order no. 444616 444627 necessary 4 cylinder-screws order no. 823148 823545 Bracket order no. 444617 444628 necessary 4 cylinder-screws order no. 823148 823545 Design group: 1 Air-Connection (right- or left-rotation) 1 Hose-nozzle order no. 410540 ( 3 /8 ) 410509 ( 1 /2 ) 1 Silencer order no. 802671 ( 3 /8 ) 802666 ( 1 /2 ) 1 Silencer order no. 802666 ( 1 /2 ) 822086 ( 3 /4 ) Design group: 2 Air-Connections (right- and left-rotation) 2 Hose-nozzles order no. 410540 ( 3 /8 ) 410509 ( 1 /2 ) 1 Silencer order no. 802666 ( 1 /2 ) 822086 ( 3 /4 ) Drill-Chuck Range 1-13 mm / B 16 order no. 804652 Quick change chuck Range 1-13 mm / B 16 order no. 804663 18
Motor size 6 left rotation D 5 A 1 A 2 A 3 A 4 - Chucking range C 2 (h9) Motor size 8 D1 D1 D 3 D 4 B 2 (k6) B 3 (e8) B 1 (e8) C 4 C 1 C 3 D 2 - Exhaust Air A2 A1 A3 Silencer B3 (e8) Spindle with cone for drill-chuck B16 DIN 238 E 1 Flange B 3 (e8) E 6 E 3 E 4 E 2 E 5 F 5 Bracket F 1 (-0.2) F 2 F 5 F 4 F 3 F 6 F 7 Motor size 6 8 Dimensions of Motor (mm) Type A1 A2 A3 A4 B1 B2 B3 C1 C2 C3 C4 D1 D2 D3 D4 D5 67-006 67-016 67-026 67-036 194 30 162 62 56 14 35 16 5 48 M6 3 /8 1 /2 14 12 24 67-046 212 30 180 80 56 14 35 16 5 48 M6 3 /8 1 /2 14 12 24 67-056 67-066 67-0661 217 35 180 80 56 19 35 21.5 6 48 M6 3 /8 1 /2 14 12 24 67-016B16 67-026B16 67-036B16 201 37 162 62 56 35 48 M6 3 /8 1 /2 14 12 24 67-046B16 219 37 180 80 56 35 48 M6 3 /8 1 /2 14 12 24 67-056B16 67-066B16 67-0661B16 219 37 180 80 56 35 48 M6 3 /8 1 /2 14 12 24 67-008 67-028 67-038 235 35 197 65 82 19 50 21.5 6 68 M8 1 /2 3 /4 22 12 39 67-048 67-058 67-0581 268 60 205 73 82 28 50 31 8 68 M8 1 /2 3 /4 22 12 39 Motor size 6 8 Dimensions on Flange (mm) Dimensions on Bracket (mm) Type B3 E1 E2 E3 E4 E5 E6 F1 F2 F3 F4 F5 F6 F7 67-006 67-016 67-026 67-036 35 7.5 8.5 85 70 6.6 32 40 25 50 6.6 5.5 70 85 67-046 35 7.5 8.5 85 70 6.6 32 40 25 50 6.6 5.5 70 85 67-056 67-066 67-0661 35 7.5 8.5 85 70 6.6 32 40 25 50 6.6 5.5 70 85 67-016B16 67-026B16 67-036B16 35 7.5 8.5 85 70 6.6 32 40 25 50 6.6 5.5 70 85 67-046B16 35 7.5 8.5 85 70 6.6 32 40 25 50 6.6 5.5 70 85 67-056B16 67-066B16 67-0661B16 35 7.5 8.5 85 70 6.6 32 40 25 50 6.6 5.5 70 85 67-008 67-028 67-038 50 10 11.5 115 100 9 46 60 35 50 11 9.5 92 110 67-048 67-058 67-0581 50 10 11.5 115 100 9 46 60 35 50 11 9.5 92 110 19
Technical Data Air inlet (remote start) type 211-43 EA 202-30 27-030 Rear air exhaust order no. 314740 C 315082 A 314925 A Grinding Insert Head-Ø mm/in. max. 13 / 33 /64 max. 25 / 1 max. 32 / 1 17 /64 Milling Insert (high-grade steel) Head-Ø mm/in. max. 6 / 15 /64 max. 10 / 25 /64 max. 12 / 15 /32 Speed, idling rpm 47000 32000 20000 Air consumption (under load) m 3 /min / cfm 0.23 / 8.1 0.3 / 11 0.38 / 13.4 Power KW / HP 0.15 / 0.2 0.25 / 0.33 0.4 / 0.54 Weight kg / lbs 0.36 / 0.8 0.8 / 1.76 0.7 / 1.54 Noise Level db (A) 73 72 79 Air Hose I.D. mm / in. 6 / 1 /4 6 / 1 /4 10 / 25 /64 Air inlet pipe thread size 1 /4 m 1 /4 m 1 /4 m Performance data relate to an air pressure of 6.3 bar (90 PSI) Standard Equipment: Collet Ø 6 mm Collet Ø 6 mm Collet Ø 6 mm Wrench Wrench Optional Equipment: Collet Ø 3 mm order no. 312681 312681 312690 Ø 4 mm order no. 312684 312684 312692 Ø 5 mm order no. 312686 312686 312693 Ø 6 mm order no. 312688 312688 312694 Ø 7 mm order no. 312739 Ø 8 mm order no. 312696 Ø 9 mm order no. 313137 Ø 1 /8 (3.175 mm) order no. 312682 312682 312691 Ø 1 /4 (6.35 mm) order no. 312689 312689 312695 20
24 141 70 34 13 8 type 211-43 EA ø12 ø 28 e8 ø 28 d11 G 1/4 AF 10 Exhaust air Collet ø 6 AF 9 Chucking diameter 189 162.5 22.4 AF 10 35.5 AF 21 11 type 202-30 G 1/4 ø 25.8 ø 25.8 ø 26 h8 AF 24 AF 13 Collet ø 6 AF 9 AF 12 AF 17 AF 36 Chucking Range AF 36 AF 17 Exhaust air type 27-030 ø 38 e8 G 1/4 ø 20 3 x 45 91 30 10 8 179 Exhaust Hose cpl. 313179 A ø 38 15 28 Air Hose 6x12 2 m long 806095 Exhaust Hose 23x28 0.75 m long 806110 314740 C 315083 314925 A 21
22
Speed standard values (rpm) for HSS spiral-drills Cutting 35 m/min 28 m/min 25 m/min 14 m/min 11 m/min 7 m/min 22 m/min 12 m/min 50 m/min 90 m/min 165 m/min 210 m/ min Speed (115 ft./min) (90 ft./min) (80 ft./min) (45 ft./min) (35 ft./min) (23 ft./min) (70 ft./min) (40 ft./min) (165 ft./min) (300 ft./min) (540 ft./min) (690 ft./min) Carbon steel Alloy steel Stainless Cast-Iron Copper Lightweight-Metal Magnesium- Drill up to above steel up to above Bronze common Alloy 2 ) dia. 500 500-700 700 700-900 900-1100 180 180 Brass alloy hard mm/in. N/mm 2 N/mm 2 N/mm 2 N/mm 2 N/mm 2 N/mm 2 N/mm 2 mild brass 1 ) (30 (30-45 (45 (45-55 (55-70 (10 (10 long tons/ long tons/ long tons/ long tons/ long tons/ long tons/ long tons/ sq. in.) sq. in.) sq. in.) sq. in.) sq. in.) sq. in.) sq. in.) 1/0.04 11000 8800 7800 4400 3400 2200 7000 3800 16000 28000 52000 66000 2/ 5 /64 5500 4400 3900 2200 1700 1100 3500 1900 8000 14000 26000 33000 3/ 1 /8 3700 3000 2600 1500 1100 730 2300 1300 5300 9000 17300 22000 4/ 5 /32 2800 2200 2000 1100 850 550 1700 950 4000 7000 13000 16500 5/ 13 /64 2200 1800 1600 880 680 440 1400 760 3200 5600 10400 13200 6/ 15 /64 1900 1500 1300 735 570 365 1200 630 2700 4800 8700 11000 7/ 9 /32 1600 1300 1100 630 485 315 1000 540 2300 4000 7400 9400 8/ 5 /16 1400 1100 975 550 425 275 875 475 2000 3500 6500 8300 9/ 23 /64 1200 975 865 490 380 245 780 420 1800 3100 5800 7400 10/ 25 /64 1100 880 780 440 340 220 700 380 1600 2800 5200 6600 1) Speed therefore for triplet of duro-plates, hard-paper and hard tissues, however instead of the HSS-drills we recommend quickly steel-drills equipped with hard-metal K 10 2) for thermos-plates, we recommend double the values 23
DEPRAG SCHULZ GMBH u. CO. P.O. Box 1352, D-92203 Amberg, Germany Kurfürstenring 12 18, D-92224 Amberg Phone (0 96 21) 371-0, Fax (0 96 21) 371-120 http://www.deprag.com info@deprag.de QUALITY CERTIFIED AS PER DIN EN ISO 9001 U N I T E S Technical alterations reserved - Fri