Single-stage safety solenoid valves COMBUTEC MV/4 MVD, MVD/5, MVDLE/5 6.20 Printed in Germany Edition 09.12 Nr. 214 6 1 6 Technical description The DUNGS safety solenoid valve MV/4, MVD, MVD/5, MVDLE/5 is a single-stage automatic shut-off valve as per EN 161 for gas burners and gas appliance. - Max. operating pressure up to, or mbar (20, 36 or kpa) - normally closed - MV, MVD: fast opening - MVDLE: Slow opening with adjustable fast stroke for start gas volume - Main volume adjustable (MVD/MVDLE) - DC solenoid, rectifier wiring with radio interference suppression in terminal box with PG screw union - Mountable closed position signal contact to monitor closed position of valve (.../5) - Pipe thread as per ISO 7/1 - Flange connection as per DIN 2633, ISO 7005 - Reliable function, rugged and maintenance-free - On request, design without non-ferrous metals Application The solenoid valve is used for securing, limiting, shutting off and releasing gas supply to gas burners and gas appliances. MV/4 Range of application: for large breaking capacities, e.g. pulsed firing. The DUNGS safety solenoid valve MV... is suitable for gases of families 1, 2, 3 and other neutral gaseous media. Approval EC type test approval as per EC Gas Appliance Directive: MV CE-00 AO3219 EC type test approval as per EC Pressure Equipment Directive: MV CE0036 Approvals in other important gas consuming countries. Special designs for the North American market with U L, FM and CSA registrations. N.V. COMBUTEC S.A. Ijzerenweglei 2b 2640 Mortsel T + 32 3 443 97 F +32 3 443 97 89 info@combutec.be www.combutec.be
MV/4, MV/5 MVD/5 MVDLE/5 Single-stage solenoid valve, normally when closed, fast opening, fast closing. Single-stage solenoid valve, normally when closed, fast opening, fast closing, manual limitation of flowing gas volume by adjusting main volume. One-stage solenoid valve, normally when closed, slow opening, fast closing. Opening time adjustment with fast stroke range. Main volume adjustment. Specifications Nominal diameters Pipe thread as per ISO 7/1, Rp Flange Max. operating pressure Solenoid valve Closing time Opening time Fast stroke Main volume adjustment 15 20 25 40 3/8 1/2 3/4 1 1 1/2 2 2 1/2 Connection flange as per DIN EN 92-1 up to mbar (20 kpa), mbar (36 kpa) or up to mbar ( kpa) - refer to type overview Valve as per EN 161, Class A, Group 2, single-stage mode for MVDLE at room temperature 20 C and without fast stroke Adjustable Manually adjustable on MVD and MVDLE Materials of gas-conveying parts Housing: Seals: aluminium, steel, brass NBR basis Voltage/frequency Rating / power consumption Switch-on duration Degree of protection Electrical connection Switching rate Measuring/ignition gas connection Dirt trap Ambient temperature Installation position Closed position signal contact Valve proving system Accessories 2 V AC (+ % -15 %); - Hz - other voltages on request Solenoids E, 61E in 24-28 VDC external activation of solenoid coils required, see operating and mounting instructions Refer to type overview % IP 54, IP on request At screw terminals via PG* 11 cable gland (* = heavy-gauge conduit thread) Plug connection as per DIN 1 01-3 can be retrofitted MV/4, MVD /5: max. 0/h MVDLE /5: max. /h MVD 2/5, MVD 2/5, MVD 5/5, MVD 5/5, MVD 5/5: max. 20/h MV 5/5 S, MV 5/5 S, MVD 2: max. 20/h G 1/4 ISO 118, on both sides in inlet section, additionally G 3/4 on input side, form size (flange) upwards Sieve installed, mesh width 1 mm -15 C to + C Solenoid from vertically upright to horizontally lying MV/5, MVD/5, MVDLE/5: Type K01/1, DIN-tested, mountable on DN - DN Type VDK A S02, mountable via G 1/4 test connection, Type VPS 4, mountable with adapter up to DN K01 closed position signal contact, see Datasheet 12.01 211 202 Equipment plug for line socket, DIN 11-3 733 2 6 N.V. COMBUTEC S.A. Ijzerenweglei 2b 2640 Mortsel T + 32 3 443 97 F +32 3 443 97 89 info@combutec.be www.combutec.be
Type p max. DN / Rp Solenoid No. Order No. P max. [VA] I max. Opening ~ (AC) time 2 V Dimensions [mm] ø a b c d e f Weight [kg] MV /4 MV 207/4 MV 2/4 MV /4 MV 220/4 /2 251 279 251 2 251 281 251 282 251 283 0. 1 1 1 1 1 225 2 2 1. 2.45 4. 5. MVD 203/5 MVD /5 MVD 207/5 MVD 207/5 MVD 2/5 MVD /5 MVD /5 MVD 220/5 MVD 225/5 /2 1/2 2 8 571 013 2 013 227 121 962 013 4 015 446 129 977 011 767 119 701 0.13 0. 0. 1 2 1 220 1 1 1 1 1 225 2 140 1 2 2 325 0. 1. 2.4 2.45 4.3 5.4 5.. MVDLE 203/5 MVDLE /5 MVDLE 207/5 MVDLE 2/5 MVDLE /5 MVDLE /5 MVDLE 220/5 MVDLE 225/5 /2 1/2 2 8 597 013 284 013 276 013 524 015 412 122 002 011 7 118 935 0.13 0. 1 2 1 1 2 1 1 155 155 1 2 3 1 1 1 320 0. 1. 2.55 2. 4.4 5.5 6.20 11.40 MVD 3/5 MVD 5/5 MVD 7/5 MVD 5/5 MVD 515/5 MVD 520/5 MVD 525/5 /2 1/2 158 0 158 1 157 5 157 540 157 5 167 0 0. 1 1 2 1 1 1 1 1 140 2 370 0. 2.40 2. 5.40 8. 14. MVDLE 3/5 MVDLE 5/5 MVDLE 7/5 MVDLE 5/5 MVDLE 515/5 MVDLE 520/5 /2 120 2 222 077 222 078 222 079 222 0 222 081 222 082 25 26 0.11 0.12 0. 1 1 1 2 155 1 220 1 220 1 213 0. 2. 2. 5.6 11. MVD 2040/5 MVD 2040/5 MVD 20/5 MVD 20/5 MVD 20/5 MVD 2/5 DN DN DN DN 2 5 111 146 119 6 111 187 169 3 169 169 4 0. 1 2 2 3 3 1 221 2 3 1 1 315 340 4 3 3 4 6.8 7.0 7.70 12.70 18. 3 MVDLE 2040/5 MVDLE 2040/5 MVDLE 20/5 MVDLE 20/5 MVDLE 20/5 MVDLE 2/5 DN DN DN DN 2 5 119 914 111 153 111 1 9 940 0 0. 1 2 2 3 3 2 2 320 3 1 1 2 3 405 4 3 3 4 6.9 7.1 7. 13. 18. 3 MVD 40/5 MVD /5 MVD /5 MVD /5 MVD 5/5 DN DN DN DN 5 E 1) 6 6 1 5 1 640 166 0. * 1 2 2 3 3 1 2 345 1 1 2 340 3 445 2 370 4 570 7.00 12.00.00 27.00 42.00 MVDLE 40/5 MVDLE /5 DN 222 086 222 087 ca. 20 s ca. 20 s 2 2 1 2 7.00 13. 3 6 f = Space requirement for solenoid changing d = largest width * = for max. 3 s 1) Solenoids E, 61E in 24-28 VDC external activation of solenoid coils required, see operating and mounting instructions N.V. COMBUTEC S.A. Ijzerenweglei 2b 2640 Mortsel T + 32 3 443 97 F +32 3 443 97 89 info@combutec.be www.combutec.be
Dimensions [mm] MV - 220/4 * MVD 203-525/5, MVDLE 2020/5-5/5 d = largest width Ignition gas valve, Type MV 2, refer to Datasheet 6.01 * Mounting of a closed position signal contact not possible Dimensions [mm] MV 5/5 - MVD 2 MV 5 S MV 5 S Type p max. DN / Rp Order No. Solenoid No. P max. [VA]* I max. ~(AC) 2 V [A] ** Opening time Dimensions [mm] a b c d e f g h Weight [kg] MV 5/5 S MV 5/5 S DN DN 224 681 224 682 S 61S 4 406 439 2 2 531 582 514 547 112 143 56.0 62.0 MVD 2/5 MVD 5/5 MVD 2/5 MVD 5/5 MVD 2/5 MVD 5/5 DN DN DN DN DN DN 169 4 1 159 8 159 840 1 0 1 3 5 E 1) E 1) E 1) 61E 1) 61E 1) 3 3 4 4 3 3 406 406 439 439 2 2 2 2 4 4 531 531 582 582 498 498 514 514 547 547 112 112 143 143 39.0 39.0 56.0 56.0 62.0 62.0 MVD 2 DN 213 892 70E 0 5 415 7 587 1 123.0 * Electrical rating in open state ** Switch-on current for approx. 3 s 1) Solenoids E, 61E in 24-28 VDC external activation of solenoid coils required, see operating and mounting instructions 4 6 N.V. COMBUTEC S.A. Ijzerenweglei 2b 2640 Mortsel T + 32 3 443 97 F +32 3 443 97 89 info@combutec.be www.combutec.be
Type MVD /5 Type MVDLE/5 9 8 7 8 7 6 5 4 3 2 1 p 1 p 2 p 1 p 2 1 Housing 2 Sieve 3 Valve plate 4 Closing spring 5 Armature 6 Solenoid coil 7 Electrical connection Setting 8 - Main volume 9 - Fast stroke - Hydraulic brake Functional description The DUNGS safety solenoid valve is an automatic shut-off valve operated with auxiliary power. The electromagnetic drive opens against the force of the closing spring 4. The stroke of armature 5 can be limited by the setting screw 8. The hydraulic brake permits slow opening. Fast stroke 9 can be adjusted. If the auxiliary power is interrupted (operating voltage), closing spring 4 closes the valve within 1 second. The closed position of the valve can be monitored by a mountable closed position signal contact. V verwendetes Gas/gas used/ gaz utilisé/gas utilizzato = V Luft/air/air/aria x f Gasart Type of gas Type de gaz Tipo di gas Dichte Spec. Wgt. poids spécifique Peso specifico [kg/m 3 ] dv f 5 6 f = Dichte Luft Spec. weight air poids spécifique de l air peso specifico aria Dichte des verwendeten Gases Spec. weight of gas used poids spécifique du gaz utilisé peso specifico del gas utilizzato Erdgas/Nat.Gas/ Gaz naturel/gas metano Stadtgas/City gas/ Gaz de ville/gas città Flüssiggas/LPG/ Gaz liquide/gas liquido Luft/Air/ Air/Aria 0.81 0.58 2.08 1.24 0. 0.47 1.67 1.24 1.46 0.77 N.V. COMBUTEC S.A. Ijzerenweglei 2b 2640 Mortsel T + 32 3 443 97 F +32 3 443 97 89 info@combutec.be www.combutec.be
COMBUTEC Single-stage safety solenoid valves MV/4 MVD, MVD/5, MVDLE/5 Flow diagram 6 6 N.V. COMBUTEC S.A. Ijzerenweglei 2b 2640 Mortsel T + 32 3 443 97 F +32 3 443 97 89 info@combutec.be www.combutec.be