Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufacturer which provided the original information in this electronic deliverable. Michco s only part in this electronic deliverable was the electronic assembly process. You may contact Michco through the following methods: Phone () 484- or (800) - MI, OH, IN only 20 N. High St. -- Lansing, Michigan -- 480 Fax: () 484-8 Email: CustServ@Michco.com Web site: www.michco.com Parts Web site: www.floormachineparts.com Order Parts on Line at: www.floormachineparts.com Directly to Parts & Service: By Email: Shop@Michco.com By Fax: () 702-204 By Voice: Use numbers above. Serving the Cleaning Industry Since 2 Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners. Manuals are subject to Manufacturer s reproduction limitations. Originals or reproductions were provided by manufacturers through a request. We make no warranty as to the correctness of information provided in this document and you assume all risk.
FORM NO. 04228 PARTS LIST MAXICAT II Model 4272 This parts list is for machines after serial number 74 4/ revised / Form Number 04228
FORM NO. 04228 TABLE OF CONTENTS Chassis System - Chassis & Handle... -2 Chassis System - Axle & Wheels... -4 Hopper & Main Broom System... - Side Broom System... 7-8 WHEN ORDERING PARTS Use the digit numbers from the "Part No." columns in this parts list. Specify the model and serial number of the machine. Use the space below to record the model and serial number for future reference. Model Serial Number
FORM NO. 04228 8 2 FRONT 4 4 7 8
CHASSIS SYSTEM - CHASSIS & HANDLE Item Part Part No. No. Qty QtyDescription 42727 Handle 2 0020 4 Scr, Hex /-8 x -/4 4702 Adjusting Screw 4 470 Hopper Top Seal 47088 2 Strap 000 /4-20 x /2 Loc Screw 7 47078 Chassis 8 470 Swivel Caster 474 Skirt Kit includes: 470 2 Side Skirt 478 Rear Skirt 470 2 Strap 47080 Mounting Plate 00 /4-20 x 2 Loc Screw 4708 Broom Arm Yoke 4 000 Cotter Hair Pin /4 x /2 0028 /2 Flat Washer 00282 4 Nut, Hex Nyl Loc-Thin /-8 002220 8 Wsh, Flt Std / 8 0 Decal, MAXICAT II FORM NO. 04228 2
FORM NO. 04228 4 7 8 2 4 4 8 8 20 FRONT
revised /8 FORM NO. 04228 Item Part No. Qty Description CHASSIS SYSTEM - AXLE & WHEELS 4704 Axle TSB 8 2 0028 /2 Flat Washer 47072 2 Support Hub 4 00 4 #-24 x /2 Loc Screw 8 Thrust Bearing 004 4 # Flat Washer 7 470 Gear 8 0 Retainer Ring 47227 2 Wheel Assy * 4742 2 Tire * 4722 2 Wheel Hub Rim * 47 4 Bearing 0007 2 Cap Nut TSB 8 47 Bearing TSB 8 4704 Pinion TSB 8 00 /8 x /8 Pin 4 002 2 Retainer Ring 478 2 Bearing Intentionally omitted 00 4 #-4 x Plastite Screw 8 47 2 Yoke 00 #-24 x /8 Loc Screw 20 474 Tab * = Not Shown 4
FORM NO. 04228 FRONT 8 7 2 4 4 4
revised /8 FORM NO. 04228 Item Part No. Qty Description HOPPER & MAIN BROOM SYSTEM 4707 Hopper 2 47082 Hopper Lip 4708 Hopper Strap Note 4 4700 Hopper Lip Plate Note 00204 Screw, Hex -24 x.7 00278 Nut, Nyl Loc -24 7 0008 4 Screw, HP- -24 x 7/8 8 47 Breather 004 # Flat Washer 0 Main Broom 4708 2 Broom Mounting Disc 004 4 /4-4 x Screw 470 Broom Shaft TSB 8 4 004 2 /2 x 7/8 Pin Note: The Hopper Lip Plate PN4700 (item #4 at left) and Hopper Strap PN4708 (item # at left) have been eliminated. They are being replaced by a one piece Hopper Lip Plate PN4700 (item # below). All machines built after June will have this change. When installing the new Hopper Lip Plate PN4700 on a machine built before June, the () holes for mounting the old Hopper Lip Plate PN4700 (item #4 at left) must be plugged. You can use the existing () screws and nuts (items # and at left) by simply re-installing them in the holes after removing the Hopper Lip Plate (item #4 at left). Items # and 4 at left are no longer available, if they need to be replaced, order item # below. NEW STYLE FRONT 2 4 Item Part No. Qty Description 4707 Hopper 2 47082 Hopper Lip 4700 Plate, Hopper Lip 4 000 4 Scr, Hex Hd Thd Form -24 x.0 47 Breather 004 4 Wsh, Flt SAE #
FORM NO. 04228 8 7 4 4 2 FRONT 8 7
revised /8 FORM NO. 04228 Item Part Part No. No. Qty QtyDescription 47 Side Broom 2 470 Bumper Disc 478 2 Bearing 4 47070 Pulley 472 Belt 074 2 Bushing 7 47408 2 Guide Wheel 8 472 Broom Arm 4704 Adjusting Screw TSB 8 000 2 /2 Flat Washer 002770 /2- Nyl Loc Nut 000 /2- x 2-/4 Bolt 002708 2 /4-20 Nyl Loc Nut 4 00282 2 /4-20 x -/4 Screw 00248 /4-20 x /4 Screw 000 /4-20 x /2 Screw 720 Bushing 8 00208 /4 Flat Washer SIDE BROOM SYSTEM 8
FORM NO. 04228 NATIONAL SANITARY SUPPLY CO WESTERN REGION HEADQUARTERS: SO. FIGUEROA, LOS ANGELES, CA 00 () 27 000 SOUTHWEST REGION HEADQUARTERS: 402 GULF FREEWAY, HOUSTON, TEXAS 7702 (7) 2-7800 MIDWEST REGION HEADQUARTERS: 00-M DISTRIB. CIRCLE, FAIRFIELD, OHIO 404 () 870-70 LOCATIONS IN 8 STATES. FOR THE OFFICE NEAREST YOU PHONE -800-428-77-800-I-BUY-NSS