The TC-Line Water Recirculators The Next Generation
The TC Water Recirculators Controlled Pressure A pressure gauge is built-in as standard in every TC chiller. The working pressure of the connected system is reliably shown in kpa, kg/cm 2 and psi. Digital Control Set temperatures can be easily programmed via a pushbutton keypad. The values are shown on the digital display with 0.1 C resolution. High- and low-limit temperature values can additionally be set to ensure safe usage. Pressure as Desired The pressure in the system can be adjusted as desired with the relief valve on the back of each unit. Controlling is carried out via the builtin pressure gauge. Filling without Questions Filling the chiller with cooling fluid is carried out via the reservoir access on top of the unit. A list of accepted fluids is printed on the reservoir access panel. Only 2 liters fluid are required for the first filling due to the new cooling system with short coolingdown times.
TC Chillers - Advanced Version Each basic TC water recirculator version can be ordered in combination with a security and communication package as an advanced version. Advanced means: alarm for low level and low flow, RS232C-interface, 24V connector for external start/stop and read-out of alarm status. TC chillers are available as basic versions in 3 sizes with 5 capacity classes between 900 and 4900 watts.
Filling Level in One View Is there sufficient cooling liquid in the reservoir tank? This question is directly answered with one look at the transparent reservoir tank. The optimal filling level is marked at the kink of the front panel. Tubing Adapters Included Different applications need different tube diameters. We therefore supply tubing adapters for hoses with 1 / 2" and 3 / 8" inner diameter together with each water recirculator. Simple Liquid Changing All cooling fluids have to be exchanged after a certain usage time. The draining of the chiller is done via the practical ball-valve reservoir drain on the rear. Just connect a tube with a suitable fitting and open the valve. Easy to Clean Removing the front grill for cleaning the condenser fins is easy and does not require any tool. In addition the integrated air filter in the front grill can be separately removed and cleaned.
Technical Data of the TC-Line TC100 TC200 TC300 TC400 TC500 Temperature range C 5...35 5...35 5...35 5...35 5...35 Temperature accuracy ±K 0.1 0.1 0.15 0.15 0.15 Cooling capacity at 20 C kw 0.9 1.3 2.45 3.7 4.9 Pump capacity Pump DP1: Pressure max. bar 4.0 4.0 4.0 Flow max. l/min 5.3 5.3 5.3 Pumpe DP2: Pressure max bar 4.0 4.0 4.0 4.0 Flow max l/min 12.5 12.5 12.5 12.5 Pump connections R 1 / 2 R 1 / 2 R 1 / 2 R 1 / 2 R 1 / 2 High and low temperature protection variable variable variable variable variable Dimensions: width x depth mm 310x493 310x493 398x573 521x701 521x701 hight mm 585 585 652 741 741 Standard version 50 Hz: 230 V 230 V 230 V 400 V / 3P 400 V / 3P Type with Pump DP1 TC101 TC201 TC301 Order number 392-1011 392-2011 392-3011 Type with Pump DP2 TC202 TC302 TC402 TC502 Order number 392-2021 392-3021 392-4021 392-5021 Advanced version 50 Hz: 230 V 230 V 230 V 400 V / 3P 400 V / 3P Type with Pump DP1 TC111 TC211 TC311 Order number 392-1111 392-2111 392-3111 Type with Pump DP2 TC212 TC312 TC412 TC512 Order number 392-2121 392-3121 392-4121 392-5121 Accessories for the TC-Line Tubing 13 mm i.ø to be connected to 1/2" fittings 082-2473 2 m foam rubber insulation for tubings 13 mm i.ø 082-2168 Tubing clamp for tubing 13 mm i.ø, metal 000-2716 Tubing 8 mm i.ø to be connected to 3 / 8" fittings 082-5397 2 m foam rubber insulation for tubings 8 mm i.ø 082-5396 Tubing clamp for tubing 8 mm i.ø, metal 000-2716 Note: Each of the above listed TC versions (except models type TC301 and TC311) can be supplied with extended temperature range (-15 to +35 C). The type name is given an extra L and the order number 392- is substituted by 393-. Drain tubing with fitting for drain valve 333-0709 Replacement air filter for TC100 and TC200 333-0711 ditto for TC300 333-0712 ditto for TC400 and TC500 333-0713 4-fold stream divider to be connected to plumbing supply and return with fittings 8 mm and 12 mm 333-0708 Coupling 1 / 2" to M16x1 333-0710 External DEI package and particle filtration package for working with ultra-pure water are available on request.
TemperatureControl Rheology PolymerTechnology ThermalAnalysis A Thermo Electron business Gebr. HAAKE GmbH Dieselstr. 4. D-76227 Karlsruhe Germany Tel. +49(0)721 40 94-0 Fax +49(0)721 40 94 300 Hotline +49(0)18 05 04 22 53 info@thermohaake.com www.thermohaake.com Thermo Haake Inc. 53 W. Century Road Paramus, NJ 07652, USA Tel. 201 265 7865 Fax 201 265 1977 infousa@thermohaake.com www.thermohaake.com RHEO S.A. 99 route de Versailles F-91160 Champlan, France Tel. +33(0)1 64 54 01 01 Fax +33(0)1 64 54 01 87 info@thermorheo.com www.thermorheo.com The product information in this document was correct at the time of printing, however specifications are subject to alteration without notice due to the Thermo Haake philosophy of continual product innovation and development and any information contained herein should not be construed as a contractual commitment by Thermo Haake. All orders are accepted subject to our current Conditions of Sale, copies of which are available on request. Thermo Haake / 06.2001 623-1052