www.abspv.com Protection & Safety Equipments For Storage Tanks Pressure / Vacuum Relief Valves, Flame Arresters, Free Vent, Gauge Hatch ABS PV End. Valf San. ve Tic. A.S. Aydınlı Mah. Esenlik Sk. No : 6 34953 Tuzla / Istanbul Turkey Phone : +90 216 393 65 29 Mail : abs@abspv.com
OUR COMPANY ABS PV Endustriyel Valf San. Tic. A.S., through its ABS PV Brand, has been designing and manufacturing Protection & Safety Equipments for Chemical Tankers such as High Velocity Pressure Vacuum Valves, Flame Arresters, Test Bench and Gas Free Cover since 2006. By 2016, our company has started to produce high quality pressure vacuum relief valves, flame arresters, free vent and gauge hatch for storage tanks. ABS PV is one of the world s well known company as a manufacturer of P/V Valves. Our Company presently on the certification process of ISO 9001:2008 Quality Management System. We offer high quality services and products with our professional team and customer focused strategies since years. ABS PV STORAGE TANK PROTECTION & SAFETY EQUIPMENTS ABS PV PRESSURE/VACUUM RELIEF VALVES provide tank protection by preventing the occurrence of excessive pressure & vacuum inside the tank. Also minimize the possible losses of product evaporation. The range includes pressure/vacuum relief valves, pressure only and vacuum only valves, all available with flanged pipeline or vented to atmosphere. All models of ABS PV Pressure Vacuum Relief Valves have weight loaded or spring loaded pallets which allow intake of air and outflow of vapours as the tank normally breathes in and out. Valves can be specially supplied with a flame arrester, inlet pipe or lining. ABS PV DEFLAGRATION FLAME ARRESTERS prevent passage of flame into the storage tanks. ABS PV End of Line Flame Arresters are designed to be installed at the end of a pipeline, In-Line Flame Arresters are designed to prevent propagation of flames in piping system. ABS PV FREE VENT prevents deformation that may occur during filling and discharging of the tanks. Free Vent is supplied as complete unit ready for direct installation. ABS PV GAUGE HATCH allows easy access to atmospheric liquid storage tanks for manual level measurement, temperature The production of our equipments consist of a series of quality check points, performed by the in-house quality assurance team. All components, at the end of each process are transferred to the next step via the control team, carrying out various test methods. As each process is subject to statistical quality control procedures, also traceability of each component in the design is assured. Therefore, the quality of each single product is guaranteed within the system. All models of ABS PV products are results of comprehensive design studies and shop tests. The design of ABS PV Products for Storage Tanks are in compliance with the regulations of Atex Directive 94/9 EC, Atex 2014/34/EU and ISO EN 13463-1, ISO EN 13463-5, ISO EN 16852 Standards and certificated by ATEX. www.abspv.com 1
Pressure & Vacuum Relief Valve abs@abspv.com Model ABS PVV / O ABS PV PRESSURE/VACUUM RELIEF VALVE OPEN TO ATMOSPHERE Weight loaded Spring loaded ABS PV Pressure Vacuum Relief Valve Open to Atmosphere is intended for use where both pressure and vacuum relieves are required. The pallets in the vent housing allow intake of air and outflow of vapours as the tank normally breathes in and out. Pallets open and close to permit only that intake or outlet relief necessary to remain within permissible working pressures and avoid damage to the tank. Reduces losses due to evaporation of liquid inside the tank. Designed to protect against endurance burning by using flame screen. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 94/9/EC. Available in weight loaded and spring loaded types. C A B PRESSURE SETTING VACUUM SETTING MIN. MAX. MIN. MAX. UNITS mbar psi mbar psi mbar psi mbar psi ABS PVV/O-W 2,5 0,036 90 1,305-2,5-0,036-60 -0,870 ABS PVV/O-S 75 1,088 500 7,251-30 -0,435-90 -1,305 (mm) (inch) A (mm) B (mm) C (mm) (mm) 50 2 370 335 156 165 65 2,5 370 345 156 185 80 3 370 415 168 200 100 4 370 425 168 220 150 6 460 627 225 285 200 8 460 655 255 340 250 10 516 787 266 405 300 12 516 815 266 460 www.abspv.com 2
abs@abspv.com Pressure & Vacuum Relief Valve ABS PV PRESSURE RELIEF TO CLOSED LINE VACUUM RELIEF TO ATMOSPHERE Model ABS PVV / PC ABS PV Pressure Relief to Closed Line Vacuum Relief to Atmosphere Valve is used for pressure relief where hazardous vapours must be piped away. Pressure vents to pipeline and vacuum vents from atmosphere. The pallets in the vent housing allow intake of air and outflow of vapours as the tank normally breathes in and out by using pipeline for pressure. Designed to protect against endurance burning by using flame screen. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 94/9/EC. Available in weight loaded and spring loaded types. D A PRESSURE SETTING VACUUM SETTING MIN. MAX. MIN. MAX. UNITS mbar psi mbar psi mbar psi mbar psi ABS PVV/PC-W 2,5 0,036 90 1,305-2,5-0,036-60 -0,870 ABS PVV/PC-S 75 1,088 500 7,251-30 -0,435-90 -1,305 B C (mm) (inch) A (mm) B (mm) C (mm) D (mm) (mm) 50 2 430 335 156 496 165 65 2,5 430 345 156 496 185 80 3 450 415 168 516 200 100 4 450 425 168 516 220 150 6 623 627 225 746 285 200 8 623 655 225 746 340 250 10 745 787 266 902 405 300 12 745 815 266 902 460 3 www.abspv.com
Pressure & Vacuum Relief Valve abs@abspv.com Model ABS PVV / VC ABS PV PRESSURE RELIEF TO ATMOSPHERE VACUUM RELIEF TO CLOSED LINE ABS PV Pressure Relief to Atmosphere Vacuum Relief to Closed Line Valves are used for vacuum relief where hazardous vapours must be piped away. Vacuum vents to pipeline and pressure vents from atmosphere. The pallets in the vent housing allow intake of gas and outflow of vapours as the tank normally breathes in and out by using pipeline for vacuum. Designed to protect against endurance burning by using flame screen. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 94/9/EC. Available in weight loaded and spring loaded types. C A B PRESSURE SETTING VACUUM SETTING MIN. MAX. MIN. MAX. UNITS mbar psi mbar psi mbar psi mbar psi ABS PVV/VC-W 2,5 0,036 90 1,305-2,5-0,036-60 -0,870 ABS PVV/VC-S 75 1,088 500 7,251-30 -0,435-90 -1,305 (mm) (inch) A (mm) B (mm) C (mm) (mm) 50 2 370 335 174 165 65 2,5 370 345 174 185 80 3 370 415 188 200 100 4 370 425 188 220 150 6 460 627 247 285 200 8 460 655 249 340 250 10 516 787 292 405 300 12 516 815 294 460 www.abspv.com 4
abs@abspv.com Pressure & Vacuum Relief Valve ABS PV PRESSURE/VACUUM RELIEF VALVE TO CLOSED LINE Model ABS PVV / C ABS PV Pressure Vacuum Relief Valve to Closed Line is designed to provide pressure and vacuum relief in applications that require hazardous vapours to be piped away, rather than released into the atmosphere. The pallets in the vent housing allow intake of gas and outflow of vapours as the tank normally breathes in and out by using pipeline. Pallets open and close to permit only that intake or outlet relief necessary to remain within permissible working pressures and avoid tank damage. Designed to protect against endurance burning by using flame screen. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 94/9/EC. Available in weight loaded and spring loaded types. D A PRESSURE SETTING VACUUM SETTING MIN. MAX. MIN. MAX. UNITS mbar psi mbar psi mbar psi mbar psi ABS PVV/C-W 2,5 0,036 90 1,305-2,5-0,036-60 -0,870 ABS PVV/C-S 75 1,088 500 7,251-30 -0,435-90 -1,305 B C (mm) (inch) A (mm) B (mm) C (mm) D (mm) (mm) 50 2 430 335 174 496 165 65 2,5 430 345 174 496 185 80 3 450 415 188 516 200 100 4 450 425 188 516 220 150 6 623 627 247 746 285 200 8 623 655 249 746 340 250 10 745 787 292 902 405 300 12 745 815 294 902 460 5 www.abspv.com
Pressure Relief Valve abs@abspv.com Model ABS PV / O ABS PV PRESSURE RELIEF VALVE OPEN TO ATMOSPHERE ABS PV Pressure Relief Valve Open to Atmosphere is designed to meet the positive pressure change during filling and depending on the temperature variation during the day. The vapours relieved is vented to atmosphere. The valve offers reliable protection against excess pressure and prevents product losses almost up to the set pressure. Designed to protect against endurance burning by using flame screen. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 94/9/EC. Available in weight loaded and spring loaded types. A PRESSURE SETTING MIN. MAX. UNITS mbar psi mbar psi ABS PV/O-W 2,5 0,036 90 1,305 ABS PV/O-S 75 1,088 500 7,251 (mm) (inch) A (mm) (mm) 50 2 370 165 65 2,5 370 185 80 3 370 200 100 4 370 220 150 6 460 285 200 8 460 340 250 10 516 405 300 12 516 460 www.abspv.com 6
abs@abspv.com Pressure Relief Valve ABS PV PRESSURE RELIEF VALVE TO CLOSED LINE Model ABS PV / C ABS PV Pressure Relief Valve to Closed Line is intended for use where pressure relief is required and the relieved vapours must be piped away and not emitted into the atmosphere. A pallet in the vent housing opens and closes permitting relief necessary to avoid tank damage. Designed to protect against endurance burning by using flame screen. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 94/9/EC. Available in weight loaded and spring loaded types. A PRESSURE SETTING MIN. MAX. UNITS mbar psi mbar psi ABS PV/C-W 2,5 0,036 90 1,305 ABS PV/C-S 75 1,088 500 7,251 B (mm) (inch) A (mm) B (mm) (mm) 50 2 430 290 165 65 2,5 430 290 185 80 3 450 311 200 100 4 450 311 220 150 6 623 420 285 200 8 623 420 340 250 10 745 490 405 300 12 745 490 460 7 www.abspv.com
Vacuum Relief Valve abs@abspv.com Model ABS VV / O ABS PV VACUUM RELIEF VALVE OPEN TO ATMOSPHERE ABS PV Vacuum Relief Valve Open to Atmosphere is intended for use where only vacuum relief is required. A pallet in the vent housing retards air intake (from atmosphere) as the tank normally breathes in due to atmospheric temperature changes or emptying of the tank. The pallet opens and closes to permit only that intake relief necessary to avoid tank damage under normal operating conditions. Designed to protect against endurance burning by using flame screen. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 94/9/EC. Available in weight loaded and spring loaded types. C B VACUUM SETTING MIN. MAX. UNITS mbar psi mbar psi ABS VV/O-W -2,5-0,036-60 -0,870 ABS VV/O-S -30-0,435-90 -1,305 (mm) (inch) B (mm) C (mm) (mm) 50 2 335 156 165 65 2,5 345 156 185 80 3 415 168 200 100 4 425 168 220 150 6 627 225 285 200 8 655 255 340 250 10 787 266 405 300 12 815 266 460 www.abspv.com 8
abs@abspv.com Vacuum Relief Valve ABS PV VACUUM RELIEF VALVE TO CLOSED LINE Model ABS VV / C ABS PV Vacuum Relief Valve to Closed Line is used where vacuum relief must be piped away. The valve offers reliable protection against vacuum and prevents inbreathing of air almost up to the set vacuum, it also protects against atmospheric deflagration. Designed to protect against endurance burning by using flame screen. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 94/9/EC. Available in weight loaded and spring loaded types. C VACUUM SETTING MIN. MAX. UNITS mbar psi mbar psi ABS VV/C-W -2,5-0,036-60 -0,870 ABS VV/C-S -30-0,435-90 -1,305 B (mm) (inch) B (mm) C (mm) (mm) 50 2 335 174 165 65 2,5 345 174 185 80 3 415 188 200 100 4 425 188 220 150 6 627 247 285 200 8 655 249 340 250 10 787 292 405 300 12 815 294 460 9 www.abspv.com
Pressure & Vacuum Relief Valve abs@abspv.com Model ABS PVV-FA/2016I ABS PV PRESSURE VACUUM RELIEF VALVE WITH FLAME ARRESTER ABS PV Pressure Vacuum Relief Valve with Flame Arrester is a combination of ABS PV Pressure Vacuum Relief Valve Open to Atmosphere and ABS PV In-line Flame Arrester. Intended to protect your tank from damage created by overpressure or excessive vacuum, at the same time provides protection from externally caused sources of heat and ignition. Reduces emissions level and increases fire protection and safety. B Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 94/9/EC & ATEX 2014/34/EU Available in weight loaded and spring loaded types. Vent leakage is no more than 1 SCFH at 90% of the set pressure. A C (mm) (inch) A (mm) B (mm) C (mm) (mm) 50 2 693 373 80 165 65 2,5 693 385 68 185 80 3 713 450 175 200 100 4 733 465 165 220 150 6 925 685 285 285 200 8 965 725 245 340 250 10 1061 865 305 405 300 12 1112 920 250 460 www.abspv.com 10
abs@abspv.com Flame Arrester ABS PV IN-LINE FLAME ARRESTER Model ABS FA/2016I ABS PV s In-Line Deflagration Flame Arresters are designed to prevent propagation of flames in piping systems. By locating the arrester in close proximity to the potential source of ignition, any flame or explosion is confined to the immediate area. ABS PV arresters are supplied as complete units ready for direct installation. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 2014/34/EU Quick and easy installation Shall be installed vertically or horizontally. Vent leakage is no more than 1 SCFH at 90% of the set pressure. D A B (inch) (mm) A (mm) B (mm) C (mm) D (mm) 2 50 320 140 220 165 2,5 65 320 140 246 185 3 80 340 150 270 200 4 100 360 160 300 220 6 150 460 207 400 285 8 200 500 230 480 340 10 250 540 250 560 405 12 300 600 280 670 460 C 11 www.abspv.com
Flame Arrester abs@abspv.com Model ABS FA/2016E ABS PV END-OF-LINE FLAME ARRESTER ABS PV End of Line Deflagration Flame Arresters are designed to be installed at the end of a pipeline, where the ignition source is external, to provide protection against atmospheric deflagration. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to ATEX 2014/34/EU Quick and easy installation. Shall be installed vertically. Vent leakage is no more than 1 SCFH at 90% of the set pressure. C B A D (inch) (mm) A (mm) B (mm) C (mm) D (mm) 2 50 334 140 272 165 2,5 65 334 140 302 185 3 80 354 150 333 200 4 100 376 160 363 220 6 150 478 210 475 285 8 200 518 230 560 340 10 250 550 250 646 405 12 300 611 280 765 460 www.abspv.com 12
abs@abspv.com Free Vent ABS PV FREE VENT ABS FV ABS PV Free vents are designed for use on any atmospheric tank to prevent the build-up of internal pressure by allowing atmosphere and vapours to flow freely in tanks or vent riser pipes. It offers efficient flow capacity for protection of the tank. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to Ex Protection Type Quick and easy installation Shall be installed vertically. dxn K INCH K dxn 50 2 125 18x4 165 65 2.5 145 18x4 185 80 3 160 18x8 200 100 4 180 18x8 220 150 6 240 22x8 285 200 8 295 22x12 340 250 10 355 26x12 405 300 12 410 26x12 460 13 www.abspv.com
Gauge Hatch abs@abspv.com Model ABS GH ABS PV GAUGE HATCH ABS PV Gauge Hatch provides ready acces to storage tank s interior for inspection, gauging and sampling. Sizes available from 2 ( 50) to 12 ( 300). Designed and tested according to Ex Protection Type. Quick and easy installation. dxn K INCH K dxn 50 2 125 18x4 165 65 2.5 145 18x4 185 80 3 160 18x8 200 100 4 180 18x8 220 150 6 240 22x8 285 200 8 295 22x12 340 250 10 355 26x12 405 300 12 410 26x12 460 www.abspv.com 14
abs@abspv.com PRODUCTION CERTIFICATE This is to certify that the under noted product(s) has/have been tested with satisfactory results in accordance with the relevant requirements of the Regulations & Standards. This certificate is issued to : DATE : ORDER NUMBER : CLIENT / OWNER : DESCRIPTION : TYPE : QUANTITY : SERIAL NUMBERS : MATERIALS : Housing : ALUMINIUM, STAINLESS STEEL, CARBON STEEL Internals : AISI 316 SETTING VALUES : Pressure Side : Vacuum Side : SPECIFIED STANDARDS : EN 13463-1;2009, EN 13463-5;2011, EN 16852;2010 CERTIFICATE DIRECTIVES : 94/9/EC, 2014/34/EU CERTIFICATE NUMBERS : IEP 16 ATEX 0252, IEP 16 ATEX 0448 Warranty Close : This certificate also has been consist guarantee periods during 18 months. The failures which may cause from wrong use are out of warranty coverage. Operator must use the products as to instruction manual. Producer does not responsible in any failure and / or any defects which may result from wrong usage. MAKER ABS PV ENDÜSTRIYEL VALF SANAYI VE TICARET A.Ş. Aydınlı Mah. Esenlik Sok. No:6 Tuzla-ISTANBUL-TURKIYE Tel: +90 0216 393 65 29 (pbx) Faks: +90 0216 393 65 97 www.abspv.com abs@abspv.com 15 www.abspv.com
abs@abspv.com EUROPEAN COMMUNITY DECLARATION OF CONFORMITY Issued in accordance with the ATEX 94/9/EC, ATEX 2014/34/EU Num:.. (order number) This is to certify that in compliance with the Council Directive 94/9/EC of 30 December 2006 and 2014/34/EU of 26 February 2014. Manufactured by Address : ABS PV Endüstriyel Valf Sanayi ve Tic. A.Ş. : Aydınlı Mah. Esenlik Sk. No:6 34953 Tuzla İstanbul / Turkey declares that the product(s) detailed below conform(s) to type as required by the above Directives as evidenced by the Conformity Route below: EC Type Examination Certificate No. : IEP 16 ATEX 0252, IEP 16 ATEX 0448 EC Certificate of Conformity/Test : ATEX 94/9/EC, ATEX 2014/34/EU Item Designation : Provide tank protection by preventing the occurence of excessive pressure & vacuum inside the tank. Also minimize the possible losses of product evaporation. Prevent the passage of flame into the storage tanks. Manufacturer s Product Code No. or Type : ABS PVV/O, ABS PVV/PC, ABS PVV/VC, ABS PVV/C, ABS PV/O, ABS PV/C, ABS VV/O, ABS VV/C, ABS PVV-FA/2016I, ABS FA/2016I, ABS FA/2016E, ABS FV, ABS GH. Description : Standards Applicable EN 13463-1;2009 EN 13463-5;2011 EN 16852;2010 Product(s) Serial or Batch/Lot No(s) COMPANY NAME : Name : Title : Date:././20. Signature & Stamp Valves to be selected and installed in accordance with the manufacturer s instructions and recommendations, and subject to the user s obligations detailed in Standards Applicable on above. www.abspv.com 16
ABS PV End. Valf San. ve Tic. A.S. Aydınlı Mah. Esenlik Sk. No : 6 34953 Tuzla Istanbul - Turkey Phone : +90 216 393 65 29 Fax : +90 216 393 65 97 Mail : abs@abspv.com www.abspv.com