4110T 4040XPT 4210T* * INDICATES HIGH SECURITY CLOSER. REFER TO THAT SECTION OF THE CATALOG.

Product selectio guide Surface mouted 4000 LCN closers feature a moder desig egieered for each applicatio, easy istallatio, ad superior performace. This guide is based o the desired moutig of the closer. 4000 surface mouted closers EXTERIOR DOOR PUSH SIDE MOUNTED PULL SIDE MOUNTED double Lever Arm 4020 4040XP 4110 4210* 4050 double Lever Arm 4010 4040XP 4510* 4050 INTERIOR DOOR PUSH SIDE MOUNTED PULL SIDE MOUNTED double Lever Arm SINGLE Lever Arm double Lever Arm SINGLE Lever Arm 4010 4040XP 4020 4210* 4110 4050 4030 4110T 4040XPT 4210T* 4020 4030 4040XP 4510* 4050 4010 4000T 4010T 4020T 4510T* 4040XPT 4030T * INDICATES HIGH SECURITY CLOSER. REFER TO THAT SECTION OF THE CATALOG. Product compariso This chart shows a basic compariso of 4000 closers. Refer to the specific closer chapter for complete details. AVAILABLE NOT AVAILABLE MOUNTING FINISH COVER CYLINDER HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) PARALLEL ARM STOP FACE PLASTIC METAL NON-HANDED NON-SIZED ACCESSIBILITY DELAYED ACTION*** AVB** REGULAR (DOUBLE) STANDARD (SINGLE) Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. See idividual closer series for degrees of opeig per istallatio. ** Advaced Variable Backcheck. *** Delay Actio for 4040XP icorporates stadard 4041 cylider. *ARM FUNCTION CLOSER SERIES 4010 140 140 140 4010T 180 120 100 4020 4020T 4030 180 180 140 140 180 100 180 110 100 100 4030T 180 180 4040XP 120 120 180 110 110 4040XPT 120 110 95 4050 180 180 180 110 110 4110 180 180 180 110 110 4110T 110 100 4000T 90 POWDER COAT PLATED HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS LCN Door Cotrol Catalog 1

4000 mouted closers APPLICATIONS For alumium, hollow metal, or wood swigig doors ad frames. Ca be used with hige or pivot mouted door. Adapter plates ad other istallatio accessories available for uusual coditios. FEATURES COMMON TO 4000 SERIES Each closer (except 4050, 4040XP, 4040XPT, 4030, 4030T) is desiged for a specific moutig; hige side, top jamb, or parallel arm. 4040XP closer with regular or hold-ope arm mouts hige side or top jamb. 4030, 4040XP ad 4050 regular parallel arm closers iclude 62PA SHOE required to parallel arm mout either regular or hold-ope arm. Haded for right or left swigig doors, except for 4000T, 4030, 4030T, 4040XP, 4050 ad 4040XPT. Closers to meet ADA reduced opeig force requiremets except 4000T. Adjustable hydraulic backcheck cushios opeig swig prior to 90. Separate regulatio of geeral closig speed ad latchig speed. Joits i regular arm ad shoe adapt to ueve trim. Reversible shoe to boost latchig power o double lever arms. Available i a wide rage of stadard or optioal custom powder coat fiishes to bled with door ad frame. Plated fiishes available to accet door ad frame. Not desiged for exterior moutig or exposed to elemets. DESIGN ASSISTANCE LCN has bee providig reliable solutios to uique door cotrol problems sice 1925. Desig ad specificatio assistace are oly a phoe call away. Cotact LCN for assistace or techical iformatio at 877-671-7011 or FAX 800-248-1460 (Order Etry), Fax 815-879-1495 for Product Support. WARRANTY 30 year limited warraty; 25 year limited warraty (4050). See Geeral Iformatio Sectio for complete warraty details. SPECIFICATIONS Refer to SPECIFICATIONS sectio for suggested architectural specificatios. MATERIALS High stregth cast iro or cast alumium (4050) cylider. Forged steel mai arms. Oe piece forged steel pisto. Double heat treated piio. LCN s all weather Liquid X fluid performs to temperature rages from 120 F (49 C) to -30 F (-35 C) without ay seasoal adjustmet. LCN's stadard all weather fluid performs to temperature rages from 120 F (49 C) to -30 F (-35 C).. High efficiecy, full complemet, low frictio bearigs. Tamper resistat regulatig screws. Full rack ad piio hydraulic actio. Quiet, low frictio track ad roller combiatio for all sigle lever arm (track style) closers. FINISHES Available i six stadard or optioal custom powder coat fiishes to bled with door ad frame. LCN s powder coat fiishes surpass 100 hours of salt spray which is over four times the ANSI stadard for corrosio resistace. For istallatios where a higher level of corrosive resistace is required, LCN offers a optioal special rust ihibitig (SRI) pretreatmet. Closers that combie the exclusive LCN powder coat fiish ad the SRI pre-treatmet exceed the ANSI stadard for corrosio resistace eve further. Plated fiishes are available as a optio to accet door ad frame. (SRI ot available with plated fiishes). LISTINGS & APPROVALS UL listed for self-closig doors without hold-ope uder SWINGING DOOR CLOSERS (GVEV) file R1943. Tested ad certified uder ANSI Stadard A156.4 Grade Oe. Cosult factory for details. Cosult factory for other listigs such as; cul, Califoria State Fire Marshal, Bureau of Stadards ad Appeals. POSITIVE PRESSURE LCN closers have bee certified for three hours by UL to be i compliace with UL 10C. Cotact LCN for specific details o door closer fire ratigs. FASTENERS 4010, 4010T, 4020, 4020T, 4040XP, 4040XPT, 4050, 4110, 4110T closers are shipped with: A stadard SELF-REAMING ad TAPPING SCREW (SRT) pack that cotais Philips head SRT screws to istall the closer. 4000T series closers are shipped with: A stadard WOOD ad MACHINE SCREW (WMS) pack that cotais Philips head wood ad machie screws to istall the closer. 4030, 4030T series closers are shipped with: A stadard WOOD ad SELF-TAPPING MACHINE SCREW (WMS) pack that cotais Phillips head wood ad self-tappig machie screws to istall the closer.stadard LCN thru bolts (TB) ca be istalled o 1-3/4 (44 mm) thick doors with 1/4-20 machie screws. Optioal thru bolt (TB) sizes are available for 1-5/8 (41 mm) or 1-3/8 (35 mm) door thickess, but this must be specified whe orderig. Drill 25/64 for steel doors or Drill 3/8 for wood doors Notes: 1. For Thru Bolts, specify door thickess if other tha 1-3/4 (44mm), represeted i diagram as dimesio "X". 2. Phillips head, metric machie screws are available, please specify. 3. LCN recommeds the use of wood screws, available i optioal WMS screw packs, for wood door applicatios. MAINTENANCE Closers mouted accordig to LCN istallatio istructios require o periodic maiteace or adjustmets. 2 LCN Door Cotrol Catalog

4010 Features The 4010 is LCN s best performig heavy duty closer desiged specifically for istitutioal ad other rugged high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Fluid Haded Templatig Peel--Stick templates - 2-1/2 x 6 Moutig Hole Patter Size Adjustable 1-5 or Sized 6 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Hige (Pull Side) Regular Arm Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING FINISH COVER CYLINDER *ARM FUNCTION PARALLEL ARM STOP FACE POWDER COAT PLATED PLASTIC METAL NON-HANDED NON-SIZED ACCESSIBILITY DELAYED ACTION AVB** 140 140 140 REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. ** Advaced Variable Backcheck. LCN Door Cotrol Catalog 3

4010 Moutig details Hige (Pull) Side Moutig B 2-11/16" 68 mm 3/4" 19 mm 1" 25 mm A 11-1/2" 292 mm 2-1/4" 57 mm 3-1/2" 89 mm 12-1/4" 311 mm 3-5/8" 92 mm C 4010-18 Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 140 Reveal Should ot exceed 3/4 (19 mm). Should ot exceed 1/8 (3 mm) for Fusible lik arm Top Rail Less tha 3-3/4 (95 mm) requires PLATE, 4010-18 Plate requires 2 (51 mm) miimum Clearace of 2-1/4 (57 mm) behid door required for 90 istallatio Delayed Actio Maximum Opeig Arm Clearace Add suffix DEL to selected cylider Not available with 4016 cylider Delays closig from maximum opeig to approximately 70. Delay time adjustable up to approximately 1 miute Ca be templated for: 100 : A = 5-15/16 (151 mm) B = 11-15/16 (303 mm) Hold-ope poits up to maximum opeig with hold-ope arm Regular arm: C = 1-1/16 (27 mm) Hold-ope arm: C = 1-3/8 (35 mm) Fusible lik arm requires: C = 1-5/8 (41 mm) Note: Hold-ope poits up to maximum opeig with hold-ope arm 140 : A = 4-3/16 (106 mm) B = 10-3/16 (259 mm) 4 LCN Door Cotrol Catalog

4010 Accessories Cyliders Covers Istallatio Accessories Right Had Show 4011(6)-3071 Cast Iro Cylider Assembly Haded Stadard 4010-72 Plastic Cover No-haded Stadard 4010-72MC Metal Cover Haded Required for plated fiishes ad custom powder coat fiishes 4010-18 Plate Required where top rail is less tha 3-3/4 (95 mm) Requires miimum 2 (51 mm) top rail Optioal Arms 4010-3077 Regular Arm 4010-3049 Hold-Ope Arm 4010-3049FL Fusible Lik Arm No-haded Provides hold-ope fuctio, adjustable at elbow Optioal Haded Releases hold-ope fuctio whe exposed to temperatures above 165 F. 1/8 (3 mm) maximum reveal Optioal NOTE: Check local codes before specifyig FL arms. NOT A life safety product! LCN Door Cotrol Catalog 5

4010 Orderig Iformatio How-to-order 4010 closers 1. Select cylider size 4011 (adjustable from size 1 to 5) 4016 (DEL ot available) 2. Specify had RH LH 3. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer will be shipped with: - Stadard cylider - Stadard cover - Regular arm - Self-reamig ad tappig screws uless optios listed below are selected. Closer optios Cylider Delayed Actio (DEL) Cover Metal (MC) Arm Hold-Ope (H) Fusible Lik, 165 F (FL) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Screw Pack TB* & SRT Screw (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4. Istallatio Accessories Plate, 4010-18 Special Template ST- Table of sizes Select closer based o width of door The sprig power of o-sized 4011 cylider is adjustable from size 1 through size 5 ad is shipped set to size 3 Sized 4010 cyliders available i size 6 Delayed actio ot available with 4016 cylider Exterior (ad Vestibule) door width Iterior door width 24 610mm 30 762mm 36 914mm 42 1067mm 48 1219mm 24 610mm 34 864mm 38 965mm 48 1219mm 54 1372mm 60 1524mm *4011 *4011 size 2 size 3 size 4 size 5 size 6 4016 4016 miimum door width Miimum door width Idicates recommeded rage of door width for closer size. * Adjustable Size 1 thru 5. Reduced opeig force 4010 closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to POWER OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH 36 42 48 8.5* lbs. 4011 4011 4011 5.0* lbs. 4011 4011 4011 * Maximum opeig force. 6 LCN Door Cotrol Catalog

4010T Features The 4010T is LCN s best performig heavy duty track closer desiged specifically for iterior doors i istitutioal ad other rugged high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Fluid Haded Templatig Peel--Stick templates - 2-1/2 x 6 Moutig Hole Patter Size Sized 1, 3 or 4 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Hige (Pull Side) Stadard Arm ad Track with Roller Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. AVAILABLE NOT AVAILABLE HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING FINISH COVER CYLINDER *ARM FUNCTION PARALLEL ARM STOP FACE POWDER COAT PLATED PLASTIC METAL NON-HANDED Closer available with less tha 5.0 lbs. Opeig force @ 36 * Maximum opeig/hold-ope poit with stadard template. NON-SIZED ACCESSIBILITY DELAYED ACTION AVB 180 120 REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS 100 LCN Door Cotrol Catalog 7

4010T Moutig details Hige (Pull) Side Moutig 2" 51 mm 1-7/16" 37 mm 22-3/4" 578 mm 2-1/4" 57 mm 1-1/4" 32 mm 3-11/16" 94 mm 1-1/16" 27 mm 3-15/16" 100 mm 12-1/4" 311 mm 3-1/2" 89 mm 4010T-18 Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 180 Note: Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door. It is ot iteded to replace a auxiliary stop Reveal Should ot exceed 1/8 (3 mm) for stadard arm Should ot exceed 3-5/16 (84 mm) for double egress arm Top Rail Less tha 3-3/4 (95 mm) requires PLATE, 4010T-18 Note: Plate requires 2 (51 mm) miimum Head Frame Clearace Maximum Opeig Requires 1-1/2 (38 mm) miimum 2-1/4 (57 mm) behid door required for 90 or 180 istallatio Templatig allows 180 with stadard arm, limited to 120 whe optioal bumper is istalled Cosult factory if door will be held ope at 180 Variable hold-ope agles with ifiite optios Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the 180 130 rage Cosult factory for applicatios where door must swig 180 8 LCN Door Cotrol Catalog

4010T Accessories Cyliders Covers Right Had Show 4011T(3)(4)-3071 Cast Iro Cylider Assembly 4010T-72 Plastic Cover 4010T-72MC Metal Cover Haded No-haded Haded Stadard Stadard Required for plated fiishes ad custom powder coat fiishes Optioal Arms 4010T-3077T Stadard Arm 4010T-3077DE Double Egress Arm Haded Haded Does ot iclude track roller For double egress doors ad frames Does ot iclude track roller Maximum reveal is 3 5/16 (84mm) Optioal Tracks 4010T-3038 Stadard Track 4010T-3038B Stadard Track with Bumper 4010T-3038H Hold-Ope Track 4010T-3038HB Hold-Ope Track with Bumper No-haded No-haded No-haded No-haded No hold-ope Will accept hold-ope clip ad/or bumper assembly Stadard No hold-ope With bumper assembly istalled Will accept hold-ope clip Optioal With hold-ope clip istalled Will accept bumper assembly Optioal With hold-ope clip ad bumper assembly istalled Optioal LCN Door Cotrol Catalog 9

4010T Accessories Istallatio Accessories 4010T-18 Plate 4010T-169 Track Bumper 4010T-3054 Hold-Ope Clip 4010T-3034 Track Roller Required where top rail is less tha 3-3/4 (95 mm) Requires miimum 2 (51 mm) top rail Mouts i track to assist backcheck, does ot replace auxiliary stop Limits maximum opeig Mouts i track to provide hold-ope fuctio) Hold-ope poit cotrolled by clip locatio Quiet, low frictio roller assembly Shoulder dimesio X = 1/16 (2mm) Cosists of bumper, bumper post, ad moutig screw Cosists of clip ad moutig screws Requires 4010T-3034H Track Roller 4010T-3034H Track Roller Quiet, low frictio roller assembly Shoulder dimesio X = 1/16 (2mm) Sprig-loaded hold-ope mechaism 10 LCN Door Cotrol Catalog

4010T How-to-order 4010T closers 1. Select cylider size 4011T (ADA) 4013T 4014T 2. Specify had RH LH 3. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer will be shipped with: - Stadard cylider - Stadard cover - Stadard arm - Track roller - Stadard track - Self-reamig ad tappig screws uless optios listed below are selected. Orderig Iformatio Closer optios Cover Metal (MC) Arm Double Egress (DE)** Track Regular with Bumper (BUMPER) Hold-Ope (HO) Hold-Ope with Bumper (HBUMPER) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly ** Note: Usig this closer o double-egress doors ad frames requires the closer to be ordered with a DE suffix (i.e., 4014T DE). Stadard DE optio will accommodate pull side reveals up to 3-5/16. For deeper reveals, cosult factory. Screw Pack TB* & SRT Screw (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4 Istallatio Accessories Plate, 4010T-18 Special Template ST- Table of sizes Select closer based o width of door Sized 4010T cyliders available i size 1, 3 or 4 Closig power of all 4010T closers may be icreased 15% Iterior door width 26 660mm 34 864mm 38 965mm 48 1219mm 4011T * 4013T 4014T size 1 size 3 size 4 Miimum door width. To meet ADA, refer to chart below. Idicates recommeded rage of door width for closer size. ** Note: Usig this closer o double-egress doors ad frames requires the closer to be ordered with a DE suffix (i.e., 4014T DE). Stadard DE optio will accommodate pull side reveals up to 3-5/16. For deeper reveals, cosult factory. Reduced opeig force 4010T closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to AUTOMATIC OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH 36 42 48 8.5* lbs. N/A N/A N/A 5.0* lbs. 4011T 4011T 4011T * Maximum opeig force. LCN Door Cotrol Catalog 11

Notes 12 LCN Door Cotrol Catalog

4020 Features The 4020 is LCN s best performig heavy duty closer desiged specifically for istitutioal ad other rugged high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Fluid Haded Templatig Peel--Stick templates - 2-1-2 x 6 Moutig Hole Patter Size Adjustable 1-5 or Sized 6 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Top Jamb (Push Side) Regular arm Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. AVAILABLE NOT AVAILABLE HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING FINISH COVER CYLINDER *ARM FUNCTION PARALLEL ARM STOP FACE POWDER COAT PLATED PLASTIC METAL NON-HANDED Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. ** Advaced Variable Backcheck. NON-SIZED ACCESSIBILITY DELAYED ACTION AVB** 180 140 140 REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS LCN Door Cotrol Catalog 13

4020 Moutig details Top Jamb (Push) Side Moutig 3-5/8" 92 mm 3-1/2" 89 mm A 11-1/2" 292 mm 2-1/4" 57 mm B 2-11/16" 68 mm 3/4" 19 mm 1" 25 mm 12-1/4" 311 mm 4020-18 4020-18G Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where the door caot swig 180 Reveal Head Frame Top Rail 2-9/16 (65 mm) allows 180 opeig with regular arm 4-13/16 (122 mm) allows up to 140 opeig with regular arm 8 (203 mm) allows up to 140 opeig with LONG ARM where stadard rod ad shoe is replaced with optioal log rod ad shoe (4020-79LR) Less tha 3-7/16 (87 mm) requires PLATE, 4020-18 Use PLATE, 4020-18G for flush ceilig coditio. Either plate requires 1-3/4 (44 mm) frame miimum. Requires miimum 1-1/2 (38 mm) Closer o 4020-18 plate requires 2 (51 mm) miimum Closer o 4020-18G plate requires 2-3/4 (70 mm) miimum Delayed Actio Maximum Opeig Add suffix DEL to selected cylider. Not available with 4026 cylider Delays closig from maximum opeig to approximately 75 Delay time adjustable up to approximately 1 miute Ca be templated for: 100 : A = 6 (152 mm) B = 12 3/8 (314 mm) Notes: Hold-ope poits up to maximum opeig or 140, whichever is less, for hold-ope or fusible lik arm For hold-ope beyod 140, use 4110 closer 140 : A = 4 (102 mm) B = 10 3/8 (264 mm) 180 : A = 2 (51 mm) B = 8 3/8 (213 mm) 14 LCN Door Cotrol Catalog

4020 Accessories Cyliders Covers 4021(6)-3071 Cast Iro Cylider Assembly Left Had Show 4020-72 Plastic Cover Right Had Show 4020-72MC Metal Cover Haded Haded Haded Stadard Stadard Required for plated fiishes ad custom powder coat fiishes Optioal Arms 4020-3077 Regular Arm 4020-3077L Log Arm 4020-3049 Hold-Ope 4020-3049FL Fusible Lik No-haded No-haded Haded Haded Icludes 4020-79LR for deep reveals.(see page 14 for allowable reveals) Optioal Provides hold-ope fuctio, adjustable at elbow 5-3/4 (146 mm) maximum reveal, 140 hold ope Releases hold-ope fuctio, adjustable at shoe, whe exposed to temperatures above 165 F 3-7/8 (98 mm) maximum reveal Optioal Optioal NOTE: Check local codes before specifig FL arms. NOT A life safety product! Istallatio Accessories 4020-18 Plate 4020-18G Plate Required where head frame is less tha 3-7/16 (87 mm) Requires miimum 1-3/4 (44 mm) miimum head frame ad 2 (51 mm) top rail For flush ceilig coditio Rrequires miimum 1-3/4 (44 mm) miimum head frame ad 2-3/4 (70 mm) top rail 3-7/8 (98 mm) maximum reveal LCN Door Cotrol Catalog 15

4020 Orderig Iformatio How-to-order 4020 closers 1. Select cylider size 4021 (adjustable from size 1 to 5) 4026 (DEL ot available) 2. Specify had RH LH 3. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer will be shipped with: - Stadard cylider - Stadard cover - Regular arm - Self-reamig ad tappig screws uless optios listed below are selected. Closer optios Cylider Delayed Actio (DEL) Cover Metal (MC) Arm Hold-Ope (H) Fusible Lik, 165 F (FL) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Table of sizes Screw Pack TB* & SRT Screw (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4 Istallatio Accessories Plate, 4020-18 Plate, 4020-18G Special Template ST- Select closer based o width of door The sprig power of o-sized 4021 cylider is adjustable from size 1 through size 5 ad is shipped set to size 3 Sized 4020 cyliders available i size 6 Delayed actio ot available with 4026 cylider Exterior (ad Vestibule) door width Iterior door width 24 610mm 30 762mm 36 914mm 42 1067mm 48 1219mm 24 610mm 34 864mm 38 965mm 48 1219mm 54 1372mm 60 1524mm *4021 size 3 size 4 size 5 size 6 *4021 size 2 size 3 size 4 size 5 size 6 4026 4026 Miimum door width Miimum door width Idicates recommeded rage of door width for closer size. * Adjustable Size 1 thru 5. Reduced opeig force 4020 closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to AUTOMATIC OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH 36 42 48 8.5* lbs. 4021 4021 4021 5.0* lbs. 4021 4021 4021 * Maximum opeig force. 16 LCN Door Cotrol Catalog

4020T Features The 4020T is LCN s best performig heavy duty track closer desiged specifically for iterior doors i istitutioal ad other high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Fluid Haded Templatig Peel--Stick templates - 2-1/2 x 6 Moutig Hole Patter Size Sized 1, 3 or 4 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Top Jamb (Pull Side) Stadard arm, track with roller Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. AVAILABLE NOT AVAILABLE HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING FINISH COVER CYLINDER *ARM FUNCTION PARALLEL ARM STOP FACE POWDER COAT PLATED PLASTIC METAL NON-HANDED NON-SIZED ACCESSIBILITY Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. ** Advaced Variable Backcheck. DELAYED ACTION AVB** 180 100 REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS LCN Door Cotrol Catalog 17

4020T Moutig details Top Jamb (Pull Side) Moutig 5-5/16" 151 mm 12-1/4" 311 mm 3-1/2" 89 mm 2-1/4" 57 mm 1-1/4" 32 mm 4-1/16" 103 mm 1-1/16" 27 mm 4020T-18 1-5/8" 41 mm 22-3/4" 578 mm Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 180 Note: Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door. It is ot iteded to replace a auxiliary stop Reveal Should ot exceed 1/8 (3 mm) Head Frame Less tha 3-7/8 (98 mm), requires PLATE, 4020T-18 Plate requires 1-3/4 (44 mm) miimum Clearace Maximum Opeig 1-1/2 (38 mm) behid door required for 90 or 180 istallatio Templatig allows 180 with stadard track arm, limited to 100 with optioal bumper istalled Cosult factory if door will be held ope at 180 Variable hold-ope agles with ifiite optios Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the 180 130 rage Cosult factory for applicatios where door must swig 180 18 LCN Door Cotrol Catalog

4020T Accessories Cyliders Covers Right Had Show Left Had Show 4021T(3)(4)-3071 Cast Iro Cylider Assembly 4020T-72 Plastic Cover 4020T-72MC Metal Cover Haded Haded Haded Stadard Stadard Required for plated fiishes ad custom powder coat fiishes Optioal Arms 4020T-3077T Stadard Arm Haded Roller ot icluded with arm Tracks 4020T-3038 Stadard Track 4020T-3038B Stadard Track with Bumper 4020T-3038H Hold-Ope Track 4020T-3038HB Hold-Ope Track with Bumper No-haded No-haded No-haded No-haded No hold-ope Will accept hold-ope clip ad/or bumper assembly Stadard No hold-ope With bumper assembly istalled Will accept hold-ope clip Optioal With hold-ope clip istalled Will accept bumper assembly Optioal With hold-ope clip ad bumper assembly istalled Optioal LCN Door Cotrol Catalog 19

4020T Accessories Istallatio Accessories 4020T-18 Plate 4020T-169 Track Bumper 4020T-3054 Hold-Ope Clip 4020T-3034 Track Roller Required where head frame is less tha 3-7/8 (98 mm) Requires miimum 1-3/4 (44 mm) frame face Mouts i track to assist backcheck, does ot replace auxiliary stop Limits maximum opeig Mouts i track to provide hold-ope fuctio Hold-ope poit cotrolled by clip locatio Quiet, low frictio roller assembly Shoulder dimesio X = 1/16 (2mm) Cosists of bumper, bumper post, ad moutig screw Cosists of clip ad moutig screws Requires 4020T-3034H Track Roller 4020T-3034H Track Roller Quiet, low frictio roller assembly Shoulder dimesio X = 1/16 (2mm) Sprig-loaded hold-ope mechaism 20 LCN Door Cotrol Catalog

4020T How-to-order 4020T closers 1. Select cylider size 4021T (ADA) 4023T 4024T 2. Specify had RH LH 3. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer will be shipped with: -Stadard cylider - Stadard cover - Stadard arm - Track roller - Stadard track - Self-reamig ad tappig screws uless optios listed below are selected. Orderig Iformatio Closer optios Cover Metal (MC) Track Stadard with Bumper (BUMPER) Hold-Ope (HO) Hold-Ope with Bumper (HBUMPER) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Screw Pack TB* & SRT Screw (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4 Istallatio Accessories Plate, 4010T-18 Special Template ST- Table of sizes Select closer based o width of door 4020T cyliders available i size 1, 3 or 4 Closig power of all 4020T closers may be icreased 15% Specify ext higher size closer where strog drafts exist Iterior door width 26 660mm 34 864mm 38 965mm 48 1219mm 4021T * 4023T 4024T size 1 size 3 size 4 Miimum door width Idicates recommeded rage of door width for closer size. LCN Door Cotrol Catalog 21

Notes 22 LCN Door Cotrol Catalog

4030 Features The 4030 is a cast iro, uiversal closer desiged specifically for doors i moderate traffic coditios. This versatile closer complimets the rest of the heavy duty 4000 ad offers the choice of three moutigs ad multiple arm optios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/8 Diameter Pisto 1/2 Diameter Sigle Heat Treated Piio Joural All Weather Fluid No-Haded Templatig Peel--Stick templates - 1-23/32 x 6-17/16 Moutig Hole Patter Size Adjustable Sprig Size 1-4 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Metal, Stadard Self Reamig ad Tappig Screws (SRT) Hige (Pull Side), Top Jamb (Push Side), Parallel Arm (Push Side) Regular arm Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. See idividual closer series for degrees of opeig per istallatio. ** Advaced Variable Backcheck LCN Door Cotrol Catalog 23

4030 Moutig details Hige (Pull) Side Moutig 4-1/2" 114 mm 1-3/4" 44 mm 11-3/8" 289 mm 9-1/4" 235 mm 2-11/16" 69 mm 1-3/8" 35 mm 3/4" 19 mm 10-3/8" 264 mm 2-7/8" 73 mm Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 180 Reveal Top Rail Should ot exceed 3/16 (5 mm) for regular arm or 3/16 (5 mm) for hold-ope arm Requires 2-7/8 (73 mm) miimum Clearace 1-3/4 (44 mm), behid door required for istallatio Maximum Opeig Ca be templated for 180 Hold-ope poits up to maximum opeig with hold-ope arm 24 LCN Door Cotrol Catalog

4030 Moutig details Top Jamb (Push Side) Moutig 1-3/4" 44 mm 11-3/8" 289 mm 10-3/8" 264 mm 3-5/8" 92 mm 2-7/8" 73 mm 7-5/8" 194 mm 3/4" 2-11/16" 19 mm 69 mm 1-1/2" 38 mm 4030-18TJ Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where the door caot swig 180 Reveal up to 3-1/2 (89 mm) allows 180 opeig up to 7-1/2 (191 mm) with log arm allows for 140 opeig Top Rail Head Frame Requires 1-1/2 (38 mm) miimum from stop Less tha 2-1/4 (57 mm) requires PLATE, 4030-18TJ Plate requires 1-1/2 (38 mm) miimum Maximum Opeig Ca be templated for 180 Hold-ope poits up to maximum opeig with hold-ope arm LCN Door Cotrol Catalog 25

4030 Parallel arm mout 6-1/4" 160 mm 4" 102 mm 18" 457 mm Moutig details Parallel arm (Push Side) ad EDA moutig 1-3/4" 44 mm 4" 102 mm 3" 76 mm 10-3/8" 264 mm 5" 127 mm 4030-18PA EDA mout 4" 102 mm 8-1/4" 210 mm 1-3/4" 44 mm 18" 457 mm 5-1/2" 140 mm 2-1/8" 54 mm 2-3/4" 70 mm 5" 127 mm 4030-18PA Butt Higes Auxiliary Stop Clearace Top Rail Should ot exceed 5 (127 mm) i width Recommeded at hold-ope poit or where a door caot swig maximum opeig For 4030-62PA shoe is 4 (102 mm) from door face EDA arm is 5-1/2 (140 mm) from door face Less tha 5 (127 mm) measured from the stop requires PLATE, 4030-18PA Plate requires 1-3/4 (44 mm) miimum Stop Width Miimum 1 (25 mm) Head Frame Flush or sigle rabetted requires PA SHOE ADAPTER, 4030-419 Blade Stop Clearace, requires 1/2 (13 mm) BLADE STOP SPACER, 4030-61 Auxiliary Shoe 4030-62A allows istallatio of regular arm with overhead holder/stop Special templatig required EDA Arm Requires SHOE SUPPORT, 4030-30 for fifth screw achorage where reveal is less tha 3-1/16 (78 mm) Maximum Opeig REGULAR or HOLD-OPEN arms ca be templated for 180 EDA template allows 110 maximum opeig Hold-ope poits up to maximum opeig with hold-ope arm Notes: 4030 closers ordered with EDA arms iclude 4030-201 FIFTH HOLE SPACER to support the shoe REGULAR or HOLD-OPEN arm moutig requires PA SHOE, 4030-62PA for regular or HOLD-OPEN arms. Add prefix P to closer descriptio (eg. P4031.) P4031 closer icludes 4030-201 FIFTH HOLE SPACER to support PA SHOE 26 LCN Door Cotrol Catalog

CUSH mout B4" 102 mm 4030 1-3/4" 44 mm 18" 457 mm 5-1/2" 140 mm A 10-3/8" 264 mm 2-3/4" 70 mm 5" 127 mm Moutig details CUSH ad Sprig CUSH Moutig 4030-18PA Sprig CUSH mout Sprig Cush dead stop poits are approximately 5 greater tha templated stop poit. B4" 102 mm 5" 127 mm 1-3/4" 44 mm 18" 457 mm 5-1/2" 140 mm A 10-3/8" 264 mm 2-3/4" 70 mm 4030-18PA Clearace For CUSH or SPRING CUSH shoe is 5-1/2 (140 mm) from door face Head Frame Flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4030-419 CUSH or Sprig CUSH ARM Maximum opeig *100 moutig will ot work with swig clear higes. Requires SHOE SUPPORT, 4030-30 for fifth screw achorage where reveal is less tha 3-1/16 (78 mm) CUSH ad SPRING CUSH arms ca be templated for maximum opeig/hold-ope poit at: 85 : A = 3-5/8 (92 mm) B = 9-3/4 (248 mm) 90 : A = 3 (76 mm) B = 9-1/8 (232 mm) Note: 4031 closers ordered with CUSH or SPRING CUSH arms iclude 4030-201 FIFTH HOLE SPACER to support the shoe 100 *: A = 1-7/8 (48 mm) B = 8 (203 mm) LCN Door Cotrol Catalog 27

4030 Accessories Cyliders Covers 4031-3071 Cast Iro Cylider Assembly No-haded Stadard 4030-72MC Metal Cover No-haded Stadard Istallatio Accessories 4030-18TJ Plate 4030-18PA Plate 4030-30 CUSH Shoe Support 4030-61 Blade Stop Spacer Required for top jamb moutig where head frame is less tha 2-1/4 (57 mm) or flush ceilig coditio exists Required for parallel arm moutig where top rail is less tha 5 (127 mm), measured from the stop Provide achorage for fifth screw used with CUSH arms where reveal is less tha 3-1/16 (78 mm) Lowers parallel arm shoe to clear 1/2 (13 mm) blade stop Requires 1-1/2 (38 mm) miimum Rrequires 1-3/4 (44 mm) miimum 4030-62A Auxiliary Shoe 4030-419 PA Flush Pael Adapter 4030-62PA PA Shoe Requires a top rail of 7 (178 mm) Replaces -62PA for parallel arm moutig of regular arm with some overhead holder/stop Provides horizotal moutig surface for PA or CUSH shoe o sigle rabetted or flush frame Required for parallel arm moutig Optioal 28 LCN Door Cotrol Catalog

Arms 4030 4030-3077 Regular Arm 4030-3077LD Light Duty Arm 4030-3077L Log Arm Accessories No-haded No-haded No-haded Mouts hige side or top jamb P4031 closer icludes PA SHOE, 4030-62PA is required for parallel arm moutig Mouts hige side, top jamb or parallel arm (62PA required) Optioal Icludes LONG ROD AND SHOE, 4030-79LR for top jamb mout with deep reveals Optioal 4030-3049 Hold-Ope Arm 4030-3049L Log Hold-Ope Arm 4030-3077EDA Extra Duty Arm 4030-3049EDA Hold-Ope EDA Arm No-haded No-haded No-haded Haded Mouts hige side, top jamb or parallel arm (62PA required) Hold-ope adjustable at shoe Optioal Icludes LONG HEAD AND TUBE, 4030-3048L for top jamb mout with deep reveals Optioal Extra duty arm features solid forged steel mai ad forearm for potetially abusive istallatios Optioal Arm, provides hold-ope fuctio adjustable at shoe Optioal 4030-3077CNS Cush--Stop Arm 4030-3049CNS Hold-Ope CUSH Arm 4030-3077SCNS Sprig CUSH Arm 4030-3049SCNS Sprig HCUSH Arm No-haded No-haded No-haded No-haded Solid forged steel mai arm ad forearm with stop i soffit shoe Optioal Provides hold-ope fuctio with templated stop/hold-ope poits Hadle cotrols hold-ope fuctio For abusive applicatios Features solid forged steel mai arm ad forearm with sprig loaded stop i the soffit shoe For abusive applicatios Features solid forged steel mai arm ad forearm with sprig loaded stop i the soffit shoe Optioal Optioal Hadle cotrols hold-ope fuctio Optioal LCN Door Cotrol Catalog 29

4030 Orderig Iformatio How-to-order 4030 closers 1. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer optios Fiish Custom Powder Coat (RAL) Plated Fiish, US SRI primer (use with powder coat fiishes oly) Arm Regular w/62pa (Rw/PA) Regular w/62a (R/62A) Log (LONG) Hold-Ope (H) Hold-Ope w/62pa (Hw/PA) Log Hold-Ope (HLONG) Light Duty (LD) Light Duty w/62a (LD/62A) Light Duty w/62pa (LD/PA) Light Duty Log (LDL) EDA HEDA (specify right or left had) Cush-N-Stop (CUSH) HCush-N-Stop (HCUSH) Sprig Cush (SCUSH) Sprig HCush (SHCUSH) Table of sizes Optioal Screw Packs TB*, Wood & Machie Screw (TBWMS) * Specify door thickess if other tha 1-3/4. Istallatio Accessories Plate, 4030-18TJ Plate, 4030-18PA CUSH Shoe Support, 4030-30 Blade Stop Spacer, 4030-61 Auxiliary Shoe, 4030-62A PA Flush Pael Adapter, 4030-419 Special Template ST- Closer will be shipped with: - Stadard cylider - Stadard metal cover - Regular arm - Wood ad self-tappig machie screw pack uless optios listed below are selected. No-sized 4031 cylider is adjustable from sizes 1 to 4 ad is shipped set to size 3. Exterior (ad Vestibule) door width Iterior door width 26 660mm 30 762mm 36 914mm 26 660mm 34 864mm 38 965mm 48 1219mm 4031 size 3 size 4 4031 size 2 size 3 size 4 Miimum door width Miimum door width Idicates recommeded rage of door width for closer size. Reduced opeig force 4030 closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to AUTOMATIC OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH 36 42 48 8.5* lbs. 4031 4031 4031 5.0* lbs. 4031 4031 4031 * Maximum opeig force. 30 LCN Door Cotrol Catalog

4030T Features The 4031T is a sigle lever (track) arm, surface mouted closer desiged for iterior use o arrow head frames ad top rails. The choice of three moutigs ad ease of istallatio offer a versatile solutio to door cotrol i moderate traffic applicatios. The 4030T complimets the heavy duty 4000. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/8 Diameter Pisto 1/2 Diameter Sigle Heat Treated Piio Joural All Weather Fluid No-Haded Size Adjustable Sprig Size 1-3 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Metal, Stadard Self Reamig ad Tappig Screws (SRT) Pull side o door, pull side o frame ad push side o door Stadard arm ad track Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. See idividual closer series for degrees of opeig per istallatio. LCN Door Cotrol Catalog 31

4030T Moutig details Hige (Pull Side) Moutig 7-5/8" 194 mm 1-3/4" 44 mm 1-5/16" 33 mm 3/4" 19 mm 24-1/2" 622 mm 7/32" 6 mm MAX. C L 2-7/8" 73 mm 1-3/8" 35 mm 1-3/8" 35 mm MIN. 10-3/8" 264 mm Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 180 Reveal Top Rail Should ot exceed 7/32 (6 mm) Requires 2-7/8 (73 mm) miimum Clearace 1-3/4 (44 mm), behid door required for istallatio Maximum Opeig Ca be templated for 180 Cosult factory if door will be held ope at 180 Hold-ope poits up to maximum opeig poit with hold-ope optio Notes: May track style door closers are capable of allowig 180 of door swig. The majority of track style closers are at their weakest closig force i the 180-130 rage. Cosult factory for applicatios where door must swig 180. 32 LCN Door Cotrol Catalog

4030T Moutig details Top Jamb (Push Side) Moutig 4" 100 mm 1-3/4" 44 mm 1-5/16" 32 mm 10-3/8" 264 mm 3/4" 19 mm 3-1/4" 81 mm C L 24-1/2" 622 mm 1" 25 mm 1/8" 3 mm MAX. 1" 25 mm MIN. Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where the door caot swig 180 Reveal Top Rail Should ot exceed 1/8 (3 mm) Requires 1 (25 mm) miimum Head Frame Requires 2-7/8 (73 mm) miimum Maximum Opeig Ca be templated for 180 Cosult factory if door will be held ope at 180 Hold-ope poits up to Maximum opeig poit with hold-ope optio Notes: May track style door closers are capable of allowig 180 of door swig. The majority of track style closers are at their weakest closig force i the 180-130 rage. Cosult factory for applicatios where door must swig 180. LCN Door Cotrol Catalog 33

4030T Moutig details Stop Face (Push) Side Moutig 1-1/2" 38 mm 24-1/2" 622 mm 1-3/4" 44 mm 1-5/16" 33 mm C L 1" 25 mm 1-1/4" 32 mm MIN. 1-1/4" 32 mm 4-1/8" 105 mm C L 11-5/8" 295 mm Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 110 Reveal Top Rail Should ot exceed 1-3/4 (44 mm) Requires 4-1/8 (105 mm) miimum measured from the stop Head Frame Miimum 1-1/4 (32 mm) Maximum opeig Ca be templated for 110 Hold-ope poits up to maximum opeig with hold-ope optio Notes: May track style door closers are capable of allowig 180 of door swig. The majority of track style closers are at their weakest closig force i the 180-130 rage. Cosult factory for applicatios where door must swig 180. 34 LCN Door Cotrol Catalog

4030T Accessories Cyliders Covers Arms 4031T-3071 Cast Iro Cylider Assembly No-haded Stadard 4030T-72MC Metal Cover No-haded 4030T-3077T Stadard Arm No-haded Sigle lever mouts hige side, top jamb or stop face Track roller icluded Tracks 4030T-3038 Stadard Track No-haded No hold-ope track mouts o either side of the door Will accept hold-ope clip Stadard 4030T-3038H Hold-Ope Track No-haded Hold-ope track mouts o either side of the door Comes with 4030T-3054 Hold-ope clip Optioal Istallatio Accessories 4030T-3054 Hold-Ope Clip Mouts i track to provide holdope fuctio Hold-ope poit cotrolled by clip locatio Requires 4030T-3034H LCN Door Cotrol Catalog 35

4030T Orderig Iformatio How-to-order 4030T closers 1. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer optios Fiish Custom Powder Coat (RAL) Plated Fiish, US SRI primer (use with powder coat fiishes oly) Track Hold-ope (H) Closer will be shipped with: - Stadard cylider - Stadard metal cover - Stadard track - Stadard arm - Track roller - Wood ad self-tappig machie screw pack uless optios listed below are selected. Optioal Screw Packs TB*, Wood & Machie Screw (TBWMS) Table of sizes No-sized 4031T cylider is adjustable from sizes 1 to 3 ad is shipped set to size 3. Iterior door width 26 660mm 30 762mm 38 965mm 4031T size 2 size 3 Miimum door width Idicates recommeded rage of door width for closer size. Reduced opeig force 4030T closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to AUTOMATIC OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH 36 42 48 8.5* lbs. N/A N/A N/A 5.0* lbs. 4031T 4031T 4031T * Maximum opeig force. 36 LCN Door Cotrol Catalog

4040XP Features The 4040XP is LCN s most durable ad flexible heavy duty closer desiged for istitutioal ad other demadig high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearigs 1-1/2 Diameter Pisto 3/4 Diameter Double Heat Treated Piio Joural All Weather Liquid X Fluid No-Haded Templatig Peel--Stick templates - 2-1/4 x 5 Moutig Hole Patter Size Warraty Adjustable Sprig Size 1-6, icludes Pateted Gree Dial 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Hige (Pull Side), Top Jamb (Push Side), Parallel Arm (Push Side) Regular Arm Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING PARALLEL ARM STOP FACE POWDER COAT PLATED FINISH PLASTIC METAL COVER NON-HANDED NON-SIZED ACCESSIBILITY CYLINDER DELAYED ACTION*** AVB** REGULAR (DOUBLE) STANDARD (SINGLE) *ARM FUNCTION HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH 180 180 180 110 110 SCUSH/SHCUSH DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. ** Advaced Variable Backcheck. *** Delay feature icorporates stadard 4040 cylider (ot XP). LCN Door Cotrol Catalog 37

4040XP Moutig details Hige (Pull Side) Moutig 10-7/16" 625 mm 2-11/16" 68 mm 3/4" 19 mm 1-1/16" 27 mm 2-1/4" 57 mm 11" 279 mm 5/8" 16 mm 12-1/4" 311 mm 3-1/2" 89 mm 3-3/4" 95 mm 4040XP-18 Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig beyod 120 Reveal Top Rail Should ot exceed 3/4 (19 mm) for regular arm or hold-ope arm Less tha 3-3/4 (95 mm) requires PLATE, 4040XP-18. Plate requires 2 (51 mm) miimum Clearace Delayed Actio 2-3/8 (60 mm) behid door required for 90 istallatio Icorporates stadard 4041 cylider, without XP cylider Delays closig from 120 to 70 Delay time adjustable up to approximately 1 miute Maximum Opeig Templatig allows up to 120. Hold-ope poits 90 up to 120 with hold-ope arm. 38 LCN Door Cotrol Catalog

4040XP Moutig details Top Jamb (Push Side) Moutig 11/16" 17 mm 3-1/2" 89 mm 3-3/4" 95 mm 2-1/4" 57 mm 12-1/4" 311 mm 11" 279 mm 10-3/8" 264 mm 2-11/16" 68 mm 3/4" 19 mm 1-3/16" 30 mm 4040XP-18TJ 4040XP-18G Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig beyod 120 Reveal Arm Type Reveal Max Opeig Top Rail Regular Arm 2-9/16 Up to 120 Log 4-13/16 Up to 120 Hold-Ope 2-9/16 Up to 120 Log Hold-Ope Arm 8 Up to 120 Requires 1-1/4 (32 mm) miimum 2-1/4 (57 mm) miimum with closer o PLATE, 4040XP-18TJ 3 (76 mm) miimum with closer o PLATE, 4040XP-18G Head Frame Less tha 3-1/2 (89 mm) requires PLATE, 4040XP-18TJ With flush ceilig, use PLATE, 4040XP-18G. Either plate requires 1-3/4 (44 mm) miimum Maximum Opeig Templatig allows up to 120. Hold-ope poits 85 up to 120 with hold-ope arm. Delayed Actio Icorporates stadard 4041 cylider, without XP cylider Delays closig from 120 to 70 Delay time adjustable up to approximately 1 miute LCN Door Cotrol Catalog 39

4040XP Moutig details Parallel Arm (Push Side) Moutig 4" 102 mm 2-1/4" 57 mm 5-7/8" 149 mm 14-1/2" 368 mm 4" 102 mm 3-1/2" 89 mm 4-15/16" 125 mm 12-1/4" 311 mm 5-3/8" 137 mm 5-3/8" 137 mm 4040XP-18PA Butt Higes Auxiliary Stop Reveal Top Rail Head Frame Stop Width Blade Stop Clearace Delayed Actio Maximum Opeig Should ot exceed 5 (127 mm) i width Recommeded at hold-ope poit, where the door caot swig 180, or where CUSH-N-STOP arm is ot used Should ot exceed 7/32 (6 mm) Less tha 5-3/8 (137 mm) measured from the stop requires PLATE, 4040XP-18PA. Plate requires 2 (51 mm) miimum from the stop Flush or rabetted requires PA SHOE ADAPTER, 4040XP-419 Miimum 1 (25 mm). CUSH arm requires miimum 1-1/2 (38 mm) Clearace requires 1/2 (13mm) BLADE STOP SPACER, 4040XP-61. 4040XP-62PA shoe is 4 (102 mm) from door face. EDA shoe projects 5-1/2 (140 mm) from door face. CUSH shoe projects 6 (152 mm) from door face Icorporates stadard 4041 cylider, without XP cylider Delays closig from 120 to 70. Delay time adjustable up to approximately 1 miute. 180 opeig/hold-ope poits with all except CUSH arms 110 opeig/hold-ope with CUSH arms Notes: Optioal moutig requires PA SHOE, 4040XP-62PA for regular or HOLD-OPEN arms Add prefix P to closer descriptio (eg. P4040XP) P4040XP closer icludes 4040XP-201 FIFTH HOLE SPACER to support PA SHOE 40 LCN Door Cotrol Catalog

EDA mout 4" 102 mm 4040XP 2-1/4" 57 mm 3-1/2" 89 mm 5-1/4" 133 mm Moutig details B 14-1/16" 357 mm A 12-1/4" 311 mm EDA ad CUSH Moutig 5-1/4" 133 mm 4040XP-18PA CUSH mout 4" 102 mm 2-1/4" 57 mm 3-1/2" 89 mm 5-1/4" 133 mm B 14-1/16" 357 mm 6" 152 mm A 12-1/4" 311 mm 5-1/2" 140 mm 4040XP-18PA Clearace Head Frame CUSH ARM Delayed Actio Maximum Opeig 4040XP-62EDA is 5-1/2 (140 mm) from door face. 6 (152 mm) for CUSH Flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4040XP-419 Requires SHOE SUPPORT, 4040XP-30 for fifth screw achorage for arrow frames Icorporates stadard 4041 cylider, without XP cylider. Delays closig from maximum opeig to ; 115 with 180 template, 95 with 110 template, 85 with 100 template, 75 with 90 template. Delay time adjustable up to approximately 1 miute. EDA arm ca be templated for poits at: 110 : A = 6-3/8 (162 mm) B = 7-3/4 (197 mm) or 180 : A = 2-7/8 (73 mm) B = 4-1/4 (108 mm) Hold-ope poits up to maximum opeig with HEDA arm Notes: 4040XP closers ordered with EDA or CUSH arms iclude 4040XP-201 FIFTH HOLE SPACER to support the shoe Sprig Cush stop poits are approximately 5 more tha templated stop poit Hold ope at templated stop poits CUSH arms ca be templated for opeig/hold-ope poit at: 85 : A = 7-15/16 (202 mm) B = 9-1/8 (232 mm) 90 : A = 7-3/16 (183 mm) B = 8-1/2 (216 mm) 100 : A = 6-1/16 (154 mm) B = 7-1/4 (184 mm) or 110 : A = 5-1/16 (129 mm) B = 6-3/8 (162 mm) LCN Door Cotrol Catalog 41

4040XP Accessories Cyliders Covers 4040XP-3071 Cast Iro Cylider Assembly 4041-3071 DEL Cast Iro Cylider Assembly 4040XP-72 Plastic Cover 4040XP-72MC Metal Cover No-haded Heavy duty Used for delayed actio closig No-haded Icludes 4040XP-54 sap-o cover clip No-haded Haded Required for plated fiishes ad custom powder coat fiishes Heavy duty Stadard Optioal Istallatio Accessories 4040XP-18 Plate 4040XP-18G Plate 4040XP-18TJ Plate 4040XP-18PA Plate Required for hige side mout where top rail is less tha 3-3/4 (95 mm) Requires miimum 2 (51 mm) miimum top rail Locates top jamb mouted closer flush with top of head frame face i flush ceilig coditio Requires 1-3/4 (44 mm) miimum head frame Ceters top jamb mouted closer vertically o head frame where face is less tha 3-1/2 (89 mm). Plate requires 1-3/4 (44 mm) miimum head frame Required for parallel arm moutig where top rail is less tha 5-1/2 (140 mm), measured from the stop Requires 2 (51 mm) miimum top rail 4040XP-62PA PA Shoe Required for parallel arm moutig 42 LCN Door Cotrol Catalog phoe: 877-671-7011 fax: 800-248-1460 www.allegio.com/us 009426 rev. 5/16

Arms 4040XP 4040XP-3077 Regular Arm 4040XP-3077L Log Arm 4040XP-3077ELR Extra Log Arm Accessories No-haded No-haded No-haded Mouts pull side or top jamb with shallow reveal P4041 closer icludes PA SHOE, 4040XP-62PA required for parallel arm moutig Icludes LONG ROD AND SHOE, 4040XP-79LR for top jamb mout Optioal Icludes EXTRA LONG ROD AND SHOE, 4040XP-79ELR for top jamb mout with deep reveal Optioal 4040XP-3049 Hold-Ope Arm No-haded Mouts pull side or top jamb with shallow reveal, hold-ope adjustable shoe 4040XP closer icludes 4040XP-62PA shoe required for parallel arm moutig Optioal 4040XP-3049L Log Hold-Ope Arm No-haded Icludes LONG HEAD AND TUBE, 4040XP-3048L for top jamb mout Optioal 4040XP-3077EDA Extra Duty Arm No-haded Features forged, solid steel mai ad forearm for potetially abusive istallatios Optioal 4040XP-3049EDA Hold-Ope Extra Duty Arm Haded Parallel arm features forged, solid steel mai ad forearm for potetially abusive istallatios Hold-ope fuctio is adjusted at the shoe Optioal 4040XP-3077EDA/62G Extra Duty Arm with 62G No-haded Features forged, solid steel mai ad forearm for potetially abusive istallatios 62G shoe provides additioal blade stop clearace Optioal 4040XP-3049EDA/62G Hold-Ope Extra Duty Arm with 62G Haded Features forged, solid steel mai ad forearm for potetially abusive istallatios 62G shoe provides additioal blade stop clearace. Hold-ope fuctio is adjusted at the shoe Optioal 4040XP-3077CNS Cush-N-Stop Arm No-haded Features solid forged steel mai arm ad forearm with stop i soffit shoe. Optioal 4040XP-3049CNS HCUSH Arm No-haded Hold-ope fuctio with templated stop/hold-ope poits Hadle cotrols hold-ope fuctio Optioal 4040XP-3077SCNS Sprig CUSH Arm No-haded For abusive applicatios features solid forged steel mai arm ad forearm with sprig loaded stop i the soffit shoe Optioal 4040XP-3049SCNS Sprig HCUSH Arm No-haded For abusive applicatios features solid forged steel mai arm ad forearm with sprig loaded stop i the soffit shoe Hadle cotrols hold-ope fuctio Optioal LCN Door Cotrol Catalog 43

4040XP Accessories Istallatio Accessories cot. 4040XP-30 CUSH Shoe Support 4040XP-61 Blade Stop Spacer 4040XP-419 PA Flush Pael Adapter 4040XP-62A Auxiliary Shoe Provides achorage for fifth screw used with CUSH arms, where reveal is less tha 3-1/16 (78 mm) Optioal Required to lower parallel arm shoe to clear 1/2 (13 mm) blade stop Optioal Provides horizotal moutig surface for parallel arm shoe o sigle rabetted or flush frame Optioal Requires a top rail of 7 (178 mm) Shoe replaces -62PA for parallel arm moutig of regular arm with overhead holder/stop Optioal 4040XP-54 Sap-O Cover Clip Used to secure 4040XP-72 Plastic Cover to cylider body 44 LCN Door Cotrol Catalog

4040XP How-to-order 4040XP closers 1. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer will be shipped with: - Stadard cylider - Stadard cover - Regular arm - Self-reamig ad tappig screws uless optios listed below are selected. Orderig Iformatio Closer optios Cylider Delayed Actio (4041 DEL) Cover Metal (specify right or left had) (MC) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Table of sizes Arm Regular (REG) Regular w/62pa (Rw/PA) Regular w/62a (R/62A) Log (LONG) Extra Log (XLONG) Hold-Ope (H) Hold-Ope w/62pa (Hw/PA) Log Hold-Ope (HLONG) Extra Duty Arm (EDA) Extra Duty Arm with 62G (EDA/62G) Hold Ope Extra Duty Arm (HEDA) (Haded) Hold Ope Extra Duty Arm with 62 (HEDA/62G)(Haded) Cush-N-Stop (CUSH) HCush-N-Stop (HCUSH) Sprig Cush (SCUSH) Sprig HCush (SHCUSH) 4040XP cyliders are adjustable from size 1 through size 6 ad is shipped set to size 3 Closig power of 4040XP closers may be adjusted 50% Optioal Screw Packs TB* w/self-reamig ad Tappig (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4. Istallatio Accessories Plate, 4040XP-18 Plate, 4040XP-18TJ Plate, 4040XP-18G Plate, 4040XP-18PA CUSH Shoe Support, 4040XP-30 Blade Stop Spacer, 4040XP-61 Auxiliary Shoe, 4040XP-62A PA Flush Pael Adapter, 4040XP-419 Special Template ST- Exterior (ad vestibule) door width Iterior door width 24 610mm 30 762mm 36 914mm 42 1067mm 48 1219mm 24 610mm 30 762mm 38 965mm 48 1219mm 54 1372mm 60 1524mm *4040XP size 3 size 4 size 5 size 6 size 2 size 3 size 4 size 5 size 6 *4040XP Miimum door width Miimum door width Idicates recommeded rage of door width for closer size. * Adjustable Size 1 thru 6. Reduced opeig force 4040XP closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to POWER OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH 36 42 48 8.5* lbs. 4040XP 4040XP 4040XP 5.0* lbs. 4040XP 4040XP 4040XP * Maximum opeig force. LCN Door Cotrol Catalog 45

Notes 46 LCN Door Cotrol Catalog

4040XPT Features The 4040XPT is LCN s most flexible heavy duty track closer desiged specifically for iterior doors i istitutioal ad other rugged high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearigs 1-1/2 Diameter Pisto 3/4 Diameter Double Heat Treated Piio Joural All Weather Liquid X Fluid No-Haded Size Adjustable Sprig Size 1-4 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Pull side o door, pull side top jamb, push side o door Stadard Arm ad Track with Roller Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING PARALLEL ARM STOP FACE POWDER COAT PLATED FINISH PLASTIC METAL COVER NON-HANDED NON-SIZED ACCESSIBILITY CYLINDER DELAYED ACTION AVB 110 *ARM FUNCTION REGULAR (DOUBLE) 120 STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS 95 AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. LCN Door Cotrol Catalog 47

4040XPT Moutig details Hige (Pull Side) Moutig 2" 51 mm 22-3/4" 578 mm 1-7/16" 37 mm 3-11/16" 94 mm 1-1/16" 27 mm 2-1/4" 57 mm 1-1/4" 32 mm 7/16" 11 mm 12-1/4" 311 mm 3-1/2" 89 mm 4040XPT-18 Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 120 Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door It is ot iteded to replace a auxiliary stop Reveal Top Rail Head Frame Clearace Maximum Opeig Should ot exceed 1/8 (3 mm) for stadard arm Less tha 3-3/4 (95 mm) requires PLATE, 4040XPT-18. Plate requires 1-13/16 (44 mm) miimum Requires 1-1/4 (32 mm) miimum 2-1/4 (57 mm) behid door required for 90 istallatio Templatig allows 120 with stadard arm, limited to 110 whe optioal bumper is istalled Hold-ope poits at 85, 90, 95, 100, 105, or 110, depedig o the clip locatio i track Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the 180 130 rage Cosult factory for applicatios where door must swig 180 48 LCN Door Cotrol Catalog

4040XPT Moutig details Top Jamb (Pull Side) Moutig 4-3/8" 111 mm 12-1/4" 311 mm 3-1/2" 89 mm 4-1/16" 103 mm 1-1/16" 27 mm 2-1/4" 57 mm 1-1/4" 32 mm 2-5/8" 67 mm 22-3/4" 578 mm 4040XPT-18TJ Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 180 Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door It is ot iteded to replace a auxiliary stop Reveal Head Frame Clearace Maximum Opeig Should ot exceed 1/8 (3 mm) Less tha 3-7/8 (98 mm), requires PLATE, 4040XPT-18TJ. Plate requires 1-3/4 (44 mm) miimum 1-1/4 (32 mm) behid door required for 180 istallatio Templatig allows 180 with stadard track arm, limited to 110 with optioal bumper istalled Cosult factory if door will be held ope at 180 Hold-ope poits at 85, 90, 95, 100, 105 or 110 with hold-ope tracks Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the 180 130 rage Cosult factory for applicatios where a exterior or large/heavy door must swig 180 LCN Door Cotrol Catalog 49

4040XPT Moutig details Stop Face (Push Side) Moutig 4-5/8" 118 mm 22-3/4" 578 mm 3-1/2" 89 mm 5-1/4" 133 mm 1-1/16" 27 mm 2-1/4" 57 mm 1-1/4" 32 mm 2-7/16" 62 mm 12-1/4" 311 mm 5-1/4" 133 mm 4040XPT-18 Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 120 Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door It is ot iteded to replace a auxiliary stop Clearace Top Rail Stop Width Maximum Opeig Projects 2-1/4 (57 mm) from face of door Less tha 5-1/4 (133 mm) measured from the stop, requires PLATE, 4040XPT-18 Plate requires 3-1/2 (89 mm) miimum Miimum 1-1/4 (32 mm) Templatig allows 120 with stadard track arm, limited to 110 with optioal bumper tracks Hold-ope poits at 85, 90, 95, 100, 105 or 110 with hold-ope tracks Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the 180 130 rage Cosult factory for applicatios where door must swig 180 50 LCN Door Cotrol Catalog phoe: 877-671-7011 fax: 800-248-1460 www.allegio.com/us 009426 rev. 5/16

4040XPT Accessories Cylider Covers 4040XPT-3071 Cast Iro Cylider Assembly No-haded Stadard 4040XPT-72 Plastic Cover No-haded Sap-o Stadard 4040XPT-72MC Metal Cover Haded Required for plated fiishes ad custom powder coat fiishes Optioal Arms 4040XPT-3077T Stadard Arm No-haded Arm does ot iclude track roller 4040XPT-3077DE Double Egress Arm Haded For double egress doors ad frames Does ot iclude track roller Maximum reveal is 2-11/16 (68mm) Optioal Tracks 4040XPT-3038 Stadard Track 4040XPT-3038B Stadard Track with Bumper 4040XPT-3038H Hold-Ope Track 4040XPT-3038HB Hold-Ope Track with Bumper No-haded No-haded No-haded No-haded No hold-ope Will accept hold-ope clip ad/ or bumper assembly Stadard No hold-ope Will accept hold-ope clip Optioal With hold-ope clip istalled Will accept bumper assembly Optioal With hold-ope clip ad bumper assembly istalled Optioal LCN Door Cotrol Catalog 51

4040XPT Accessories Istallatio Accessories 4040XPT-18 Plate 4040XPT-18TJ Plate 4040XPT-169 Track Bumper 4040XPT-3054 Hold-Ope Clip Required for pull side (door mout) istallatios where top rail is less tha 3-3/4 (95 mm) - Requires miimum 1-3/4 (44 mm) top rail Required for push side (door mout) istallatios where top rail is less tha 5-1/4 (133 mm) measured from the stop Required for pull side top jamb istallatios where head frame is less tha 3-7/8 (98 mm) Requires miimum 1-3/4 (44 mm) head frame Mouts i track to assist backcheck, does ot replace auxiliary stop Limits maximum opeig. Cosists of bumper, bumper post, ad moutig screw Mouts i track to provide hold-ope fuctio) Hold-ope poit cotrolled by clip locatio Cosists of clip ad moutig screws Requires 4040XPT-3034H Hold-Ope Track Roller - Requires miimum 3-1/2 (89 mm) top rail 4040XPT-3034 Track Roller Quiet, low frictio roller assembly Shoulder dimesio X = 1/8 (3mm) 4040XPT-3034H Hold-Ope Track Roller Quiet, low frictio roller assembly Shoulder dimesio X = 1/8 (3mm) 52 LCN Door Cotrol Catalog

4040XPT How-to-order 4040XPT closers 1. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer optios Cover Metal (specify right or left had) (MC) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Track Regular with Bumper (BUMPER) Hold-Ope (HO) Hold-Ope with Bumper (HBUMPER) Table of sizes Specific Screw Pack TB* w/self-reamig ad Tappig Screws (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTORX) * Specify door thickess if other tha 1-3/4. Istallatio Accessories Plate, 4040XPT-18 Plate, 4040XPT-18TJ Special Template ST- Closer will be shipped with: - Stadard cylider - Stadard cover - Stadard arm - Track roller - Stadard track - Self-reamig ad tappig screws uless optios listed below are selected. Orderig Iformatio No-Sized 4040XPT cylider is adjustable from sizes 1 thru 4 ad is shipped set to size 3 4040XPT Iterior door width 26 660mm 34 864mm Miimum door width 38 965mm size 2 size 3 size 4 48 1219mm Idicates recommeded rage of door width for closer size. Reduced opeig force 4040XPT closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to POWER OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH 36 42 48 8.5* lbs. N/A N/A N/A 5.0* lbs. 4040XPT 4040XPT 4040XPT * Maximum opeig force. LCN Door Cotrol Catalog 53

Notes 54 LCN Door Cotrol Catalog

4050 Features The 4050 cast alumium closer is egieered for durability ad built tough to excel i the harsh eviromets of high frequecy, high abusive traffic areas. Ideal for commercial buildig applicatios ad competitive specificatio situatios that demad a combiatio of quality, reliability ad value. The cast alumium door closer offers premium features like powder coatig, full complemet bearig, All Weather Fluid ad a 25 year warraty. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Alumium Body Full Complemet Bearigs 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Liquid X Fluid No-Haded Templatig Peel--Stick templates - 2-3/8 x 6-3/4 Moutig Hole Patter Size Adjustable sprig size 1-6 Warraty 25 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Hige (Pull Side), Top Jamb (Push Side), Parallel Arm (Push Side) Stadard Regular Arm Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING PARALLEL ARM STOP FACE POWDER COAT PLATED FINISH PLASTIC METAL COVER NON-HANDED NON-SIZED ACCESSIBILITY CYLINDER DELAYED ACTION AVB REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK *ARM FUNCTION EDA/HEDA CUSH/HCUSH 180 180 180 110 110 SCUSH/SHCUSH DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. LCN Door Cotrol Catalog 55

4050 Moutig details Hige (Pull Side) Moutig 1-5/8" 41mm 3/4" 19mm 2-11/16" 68mm B 11-15/16" 304mm 2-13/16" 72mm A 3-7/8" 98mm 12-7/8" 327mm CL Butt Higes Auxiliary Stop Reveal Should ot exceed 5 (127 mm) i width Recommeded at hold-ope poit or where a door caot swig beyod templated maximum opeig Should ot exceed 3/4 (19 mm) for regular arm or hold-ope arm Top Rail Less tha 3-7/8 (98 mm) requires PLATE, 4050-18. Plate requires 1-13/16 (44 mm) miimum Clearace Delayed Actio 2-13/16 (72 mm) behid door required for 90 istallatio Delays closig from 180-70. Delay time adjustable up to approximately 1 miute Maximum Opeig Templatig allows up to 180 Hold-ope poits up to maximum opeig with hold-ope arm To 100 : A = 6-15/16 (176mm) B = 12-5/8 (321 mm) 100 to 120 : A = 5-15/16 (151mm) B = 11-5/8 (295 mm) 120 to 150 : A = 3-15/16 (100 mm) B = 9-5/8 244 mm) 150 to 180 : A = 3-7/16 (87mm) B = 9-1/8 (232 mm) 56 LCN Door Cotrol Catalog

4050 Moutig details 3-7/8" 98mm CL Top Jamb (Push Side) Moutig 5/8" 16mm 4-1/4" 108mm CL A 2-13/16" 72mm 11-15/16" 303mm 2-11/16" 68mm 3/4" 19mm 12-7/8" 327mm B The 'A' dimesio refers to the edge of the closer body to the ceter lie of pivot or hige. The 'B' dimesio refers to the edge of the closer shoe bracket to the ceter lie of pivot or hige. Butt Higes Auxiliary Stop Should ot exceed 5 (127 mm) i width Recommeded at hold-ope poit or where a door caot swig beyod templated maximum opeig Reveal Arm Type Reveal Max Opeig Top Rail Head Frame Delayed Actio Regular Arm 4 Up to 180 Log 9 Up to 150 Hold-Ope 4 Up to 170 Log Hold-Ope Arm 8-3/4 Up to 155 Requires 2 (51 mm) miimum. Less tha 3-7/8 (98 mm) requires plate. Delay closig from 180 to 70. Delay time adjustable up to approximately 1 miute. Maximum Opeig Templatig allows up to 180 Hold-ope poits up to maximum opeig with hold-ope arm To 100 : A = 6-7/8 (175 mm) B = 12-11/16 (322 mm) 100 to 120 : A = 5-7/8 (149 mm) B = 11-11/16 (297 mm) 120 to 150 : A = 3-7/8 (98 mm) B = 9-11/16 (246 mm) 150 to 180 : A = 3-3/8 (86 mm) B = 9-3/16 (233 mm) LCN Door Cotrol Catalog 57

4050 Moutig details Parallel Arm (Push) Side Moutig B 4" 102 mm CL 5-3/4 146 mm 2-13/16" 72 mm 15-1/2" 394 mm 4-1/8" 105 mm 3-7/8" 98 mm 12-7/8 327 mm CL A The 'A' dimesio refers to the edge of the closer body to the ceter lie of pivot or hige. The 'B' dimesio refers to the edge of the closer shoe bracket to the ceter lie of pivot or hige. Butt Higes Auxiliary Stop Should ot exceed 5 (127 mm) i width Recommeded at hold-ope poit, where the door caot swig beyod templated maximum opeig, or where CUSH-N-STOP arm is ot used Top Rail Less tha 5-3/4 (146mm) measured from the stop requires PLATE, 4050-18PA. Plate requires 2-1/4 (57 mm) miimum from the stop Clearace For 4050-62PA shoe is 4-1/8 (105 mm) from door face Head Frame Flush or rabetted requires PA SHOE ADAPTER, 4050-419 Stop Width Miimum 1-3/16 (30 mm) Blade Stop Clearace requires 1/2 (13mm) BLADE STOP SPACER, 4050-61 Delayed Actio Delays closig from 180-70. Delay time adjustable up to approximately 1 miute Auxiliary Shoe 4050-62A allows istallatio of regular arm with overhead holder/stop Maximum Opeig To 100 : A = 8-1/16 (205 mm) B = 8-5/8 (219 mm) 100 to 130 : A = 6-9/16 (167 mm) B = 7-1/8 (181 mm) 130 to 150 : A = 5-9/16 (141 mm) B = 6-1/8 (156 mm) 150 to 180 : A = 4-9/16 (116 mm) B = 5-1/8 (130 mm) Hold-ope poits up to maximum opeig with hold-ope arm Note: Optioal moutig requires PA SHOE, 4050-62PA for regular or HOLD-OPEN arms 58 LCN Door Cotrol Catalog

EDA mout B 4 102 mm CL 4050 CL 2-13/16 72 mm 15-13/16 402 mm 5-11/16 145 mm 3-7/8 98 mm 12-7/8 327 mm 5-3/4 146 mm Moutig details EDA ad CUSH Moutig CUSH mout B 4 102 mm A CL 2-13/16 72 mm 5-11/16 145 mm 5-3/4 146 mm CL 15-7/8 403 mm 3-7/8 98 mm A 12-7/8 327 mm The 'A' dimesio refers to the edge of the closer body to the ceter lie of pivot or hige. The 'B' dimesio refers to the edge of the closer shoe bracket to the ceter lie of pivot or hige. Clearace 4050-62EDA is 5-11/16 (145mm) from door face. 5-11/16 (145mm) for CUSH Head Frame Flush or rabetted requires FLUSH PANEL ADAPTER, 4050-419 CUSH ARM Delayed Actio Maximum Opeig Requires CUSH SHOE SUPPORT, 4050-30 for fifth screw achorage for arrow frames Delays closig from 180 to approximately 70. Delay time adjustable up to approximately 1 miute. EDA arm ca be templated for poits at: 100 100 : A = 8-1/16 (205 mm) B = 8-5/8 (219 mm) 100 to 130 : A = 6-9/16 (167 mm) B = 7-1/8 (181 mm) 130 to 150 : A = 5-9/16 (141 mm) B = 6-1/8 (156 mm) 150 to 180 : A = 4-9/16 (116 mm) B = 5-1/8 (130 mm) Hold-ope poits up to maximum opeig with HEDA arm Notes: Sprig Cush dead stop poits are approximately 5 more tha templated stop poit Hold ope at templated stop poits 4050 closers ordered with EDA or CUSH arms iclude 4050-201 FIFTH HOLE SPACER to support the shoe CUSH arms ca be templated for opeig/hold-ope poit at: 85 : A = 9-13/16 (250 mm) B = 10-1/2 (267 mm) 90 : A = 8-15/16 (227 mm) B = 9-5/8 (244 mm) 95 : A = 8-5/16 (212 mm) B = 9 (229 mm) 100 : A = 7-11/16 (196 mm) B = 8-3/8 (213 mm) 105 : A = 7-1/16 (180 mm) B = 7-3/4 (197 mm) 110 : A = 6-9/16 (167 mm) B = 7-1/4 (184 mm) LCN Door Cotrol Catalog 59

4050 Accessories Cyliders Covers 4050-3071 Cast Alumium Cylider Assembly No-haded Heavy duty 4050-3071 DEL Cast Alumium Cylider Assembly Cylider used for delayed actio closig No-haded Heavy duty 4050-72 Plastic Cover No-haded Stadard 4050-72MC Metal Cover No-haded Required for plated fiishes ad custom powder coat fiishes Optioal Istallatio Accessories 4050-18 Plate 4050-18G Plate 4050-18PA Plate 4050-30 Cush Shoe Support Required for hige side mout where top rail is less tha 3-7/8 (98 mm) Requires miimum 1-3/4 (44 mm) top rail Locates top jamb mouted closer flush with top of head frame face i flush ceilig coditio Cotact LCN Product Support for miimum head frame requiremet. Required for parallel arm moutig where top rail is less tha 5-3/4 (146 mm), measured from the stop Requires 2-1/4 (57 mm) miimum top rail Provides achorage for fifth screw used with CUSH arms, where reveal is less tha 3-1/16 (78 mm) 4050-61 Blade Stop Spacer 4050-419 Flush Pael Adapter 4050-62A Auxiliary Shoe 4050-62PA PA Shoe Required to lower parallel arm shoe to clear 1/2 (13 mm) blade stop Provides horizotal moutig surface for parallel arm shoe o sigle rabetted or flush frame Requires a top rail of 7-13/16 (198 mm) Replaces -62PA for parallel arm moutig of regular arm with overhead holder/stop Required for parallel arm moutig Optioal 60 LCN Door Cotrol Catalog

Arms 4050 Accessories 4050-3077 Regular Arm 4050-3077L Log Arm 4050-3049 Hold-Ope Arm No-haded No-haded No-haded Mouts pull side or top jamb with shallow reveal Icludes LONG ROD AND SHOE, 4050-79LR for top jamb mout Mouts pull side or top jamb with shallow reveal Icludes PA SHOE, 4050-62PA required for parallel arm moutig Optioal Hold-ope adjustable shoe 4050 closer icludes 4050-62PA shoe required for parallel arm moutig Optioal 4050-3049L Log Hold-Ope Arm 4050-3077EDA Extra Duty Arm 4050-3049EDA Hold-Ope Extra Duty Arm No-haded No-haded Haded Hold-ope adjustable shoe Icludes LONG HEAD AND TUBE, 4050-3048L for top jamb mout Optioal Features forged, solid steel mai ad forearm for potetially abusive istallatios Features forged, solid steel mai ad forearm for potetially abusive istallatios Hold-ope fuctio is adjusted at the shoe 4050-3077EDA/62G Extra Duty Arm With 62G 4050-3049EDA/62G Hold-Ope Extra Duty Arm With 62G 4050-3077CNS Cush-N-Stop Arm 4050-3049CNS HCUSH Arm No-haded Features forged, solid steel mai ad forearm for potetially abusive istallatios Haded Features forged, solid steel mai ad forearm for potetially abusive istallatios No-haded Features solid forged steel mai arm ad forearm with stop i soffit shoe Provides hold-ope fuctio with templated stop/hold-ope poits Hadle cotrols hold-ope fuctio 62G shoe provides additioal blade stop clearace for use with additioal door hardware such as a overhead holder 62G shoe provides additioal blade stop clearace for use with additioal door hardware such as a overhead holder Optioal Hold-ope fuctio is adjusted at the shoe LCN Door Cotrol Catalog 61

4050 Accessories Arms cot. 4050-3077SCNS Sprig CUSH Arm No-haded For abusive applicatios features solid forged steel mai arm ad forearm with sprig loaded stop i the soffit shoe Optioal 4050-3049SCNS Sprig HCUSH Arm No-haded For abusive applicatios features solid forged steel mai arm ad forearm with sprig loaded stop i the soffit shoe Hadle cotrols hold-ope fuctio Optioal 62 LCN Door Cotrol Catalog

4050 How-to-order 4050 closers 1. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer optios Closer will be shipped with: - Stadard cylider - Stadard cover - Tri pack arm (Rw/PA) - Self-reamig ad tappig screws uless optios listed below are selected. Orderig Iformatio Cylider Delayed Actio (4050 DEL) Cover Metal (specify right or left had) (MC) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Arm Regular (REG) Log (LONG) Hold-Ope (H) Hold-Ope w/62pa (Hw/PA) Log Hold-Ope (HLONG) Extra Duty Arm (EDA) Extra Duty Arm with 62G (EDA/62G) Hold Ope Extra Duty Arm (HEDA) (Haded) Hold Ope Extra Duty Arm with 62 (HEDA/62G)(Haded) Cush-N-Stop (CUSH) HCush-N-Stop (HCUSH) Sprig Cush (SCUSH) Sprig HCush (SHCUSH) Optioal Screw Packs TB* w/self-reamig ad Tappig (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4. Istallatio Accessories Plate, 4050-18 Plate, 4050-18G Plate, 4050-18PA CUSH Shoe Support, 4050-30 Blade Stop Spacer, 4050-61 Auxiliary Shoe, 4050-62A Flush Pael Adapter, 4050-419 Table of sizes 4050 cyliders are adjustable from size 1 through size 6 ad is shipped set to size 3 Closig power of 4050 closers may be adjusted 50% Special Template ST- Exterior (ad vestibule) door width Iterior door width 24 610mm 30 762mm 36 914mm 42 1067mm 48 1219mm 24 610mm 34 864mm 38 965mm 48 1219mm 54 1372mm 60 1524mm size 3 size 4 size 5 size 6 size 2 size 3 size 4 size 5 size 6 *4050 *4050 Miimum door width Miimum door width Idicates recommeded rage of door width for closer size. * Adjustable Size 1 thru 6. Reduced opeig force 4050 closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to POWER OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH 36 42 48 8.5* lbs. 4050 4050 4050 5.0* lbs. 4050 4050 4050 * Maximum opeig force. LCN Door Cotrol Catalog 63

Notes 64 LCN Door Cotrol Catalog

4110 Features The 4110 is LCN s best performig heavy duty closer desiged specifically for istitutioal ad other rugged high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Fluid Haded Templatig Peel--Stick templates - 2-1/2 x 6 Moutig Hole Patter Size Warraty Adjustable Sprig Size 1-5, or Sized 6, Icludes Pateted Gree Dial 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Parallel Arm (Push Side) Extra-Duty arm Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. AVAILABLE NOT AVAILABLE HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING FINISH COVER CYLINDER *ARM FUNCTION PARALLEL ARM STOP FACE POWDER COAT PLATED PLASTIC METAL NON-HANDED NON-SIZED ACCESSIBILITY Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. DELAYED ACTION AVB REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK 180 180 110 110 EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS LCN Door Cotrol Catalog 65

4110 Moutig details Parallel Arm (Push Side) Moutig 4" 102 mm 2-1/4" 57 mm 3-1/2" 89 mm 5-1/8 130 mm B 14-1/16" 357 mm 5-1/2" 140 mm A 12-1/4" 311 mm 5-1/8" 130 mm 4110-18 Butt Higes Auxiliary Stop Clearace Should ot exceed 5 (127 mm) i width Recommeded at hold-ope poit, where a door caot swig 180, or where CUSH-N-STOP arm is ot used EDA, or CUSH shoe is 5-1/2 (140 mm) from door face Top Rail Less tha 5-1/8 (130 mm) measured from stop requires PLATE, 4110-18 Plate requires 2 (51 mm) miimum measured from the stop Stop Width Miimum 1 (25 mm) Head Frame Flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4110-419 Reveal Blade Stop Spacer Crush Arm Delayed Actio Less tha 2-3/4 (70 mm), use CUSH SHOE SUPPORT, 4110-30 with CUSH arms 4110-61 required to clear 1/2 (13 mm) blade stop Requires CUSH SHOE SUPPORT, 4110-30 for fifth screw achorage with CUSH arms Add suffix DEL to selected cylider (eg. 4111 DEL) Not available with 4116 cylider. Delays closig from maximum opeig to approximately 70 Delay time adjustable up to approximately 1 miute Advaced Variable Backcheck Maximum opeig Cylider starts backcheck at approximately 45 istead of the ormal 75 Add suffix AVB to selected cylider EDA or Fusible Lik arm ca be templated for 100 A = 5-15/16 (151 mm) B = 7-1/4 (184 mm) 140 A= 4-7/16 (113 mm) B = 5-3/4 (146 mm) or 180 A= 2-15/16 (75 mm) B = 2-15/16 (75 mm) Hold-ope poits up to maximum opeig with HEDA or Fusible Lik arm CUSH arm ca be templated for maximum opeig at 85 A = 8-5/16 (211 mm) B = 9-5/8 (244 mm) 90 A= 7-11/16 (195 mm) B = 9 (229 mm) or 110 A= 5-9/16 (141 mm) B = 6-7/8 (175 mm) Hold-ope poit at maximum opeig with HCUSH arm Sprig Cush hold-ope poits are approximately 5 less tha templated stop poit 66 LCN Door Cotrol Catalog

4110 Accessories Cylider Covers Left had show 4111(6)-3071 Cast Iro Cylider Assembly Haded Stadard 4110-72 Plastic Cover No-haded Stadard 4110-72MC Metal Cover Haded Required for plated fiishes ad custom powder coat fiishes Optioal Arms 4110-3049EDA Hold-Ope Arm Haded Optioal Provides hold-ope fuctio, adjustable at shoe 4110-3049FL Fusible Lik Arm Haded Releases hold-ope fuctio adjustable at shoe whe exposed to temperatures above 165 F Optioal NOTE: Check local codes before specifig FL arms. NOT A life safety product! 4110-3077CNS Cush-N-Stop Arm No-haded Features solid forged steel mai arm ad forearm with built-i stop i soffit shoe 4110-3077EDA Extra Duty Arm No-haded Features forged, solid steel mai ad forearm for potetially abusive istallatios 4110-3077EDA/ 62G Extra Duty Arm No-haded Features forged, solid steel mai ad forearm for potetially abusive istallatios Optioal 4110-62G thick hub shoe for blade stop clearace LCN Door Cotrol Catalog 67

4110 Accessories Arms 4110-3049CNS HCUSH Arm 4110-3077SCNS Sprig CUSH Arm 4110-3049SCNS Sprig HCUSH Arm No-haded No-haded No-haded Provides hold-ope fuctio with templated stop/ holdope poits. Hadle cotrols hold-ope fuctio For abusive applicatios features solid forged steel mai arm ad forearm with sprig loaded stop i the soffit shoe Optioal For abusive applicatios features solid forged steel mai arm ad forearm with sprig loaded stop i the soffit shoe Hadle cotrols hold-ope fuctio Optioal Istallatio Accessories 4110-18 Plate 4110-30 CUSH Shoe Support 4110-61 Blade Stop Spacer 4110-419 PA Flush Pael Adapter Required for push side mout where top rail is less tha 5-1/8 (130 mm), measured from the stop Provides achorage for fifth screw used with CUSH arm, where reveal is less tha 3-1/16 (78 mm) Lowers parallel arm shoe to clear 1/2 (13 mm) blade stop Provides horizotal moutig surface for CUSH shoe o sigle rabetted or flush frame Requires miimum 2 (51 mm) miimum top rail 68 LCN Door Cotrol Catalog

4110 How-to-order 4110 closers 1. Specify cylider size 4111 (adjustable from size 1 to 5) 4116 (DEL, SHCUSH or HCUSH arm ot available) 2. Specify had RH LH 3. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass Closer optios Closer will be shipped with: - Stadard cylider - Stadard cover - Extra duty arm - Self-reamig ad tappig screws uless optios listed below are selected. Orderig Iformatio Cylider Delayed Actio (DEL) (ot available with 4116) Advaced Variable Backcheck (AVB) Cover Metal (MC) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Specify Arm Hold-Ope Extra Duty (HEDA) Fusible Lik,165 F (FL) Cush-N-Stop (CUSH) H-Cush-N-Stop (/a with 4116 cylider) (HCUSH) Sprig Cush (SCUSH) Sprig H-Cush (/a with 4116 cylider) (SHCUSH) Extra Duty (EDA) H-Extra Duty (HEDA) Screw Packs TB*, Self-Reamig & Tappig (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4. Istallatio Accessories Plate, 4110-18 CUSH Shoe Support, 4110-30 Blade Stop Spacer, 4110-61 PA Flush Pael Adapter, 4110-419 Table of sizes Special Template ST- Select closer based o width of door. The sprig power of o-sized 4111 cylider is adjustable from size 1 through size 5 ad is shipped set to size 3. Sized 4116 series cyliders 6. Delayed actio ot available with 4116 cylider H - CUSH ad SPRING H-CUSH arm ot available with 4116 cylider. Exterior (ad vestibule) door width Iterior door width 28 711mm 30 762mm 36 914mm 42 1067mm 48 1219mm 28 711mm 34 864mm 38 965mm 48 1219mm 54 1372mm 60 1524mm *4111 4116 size 3 size 4 size 5 size 6 size 2 size 3 size 4 size 5 size 6 *4111 4116 Miimum door width Miimum door width Idicates recommeded rage of door width for closer size. * Adjustable Size 1 thru 5. Reduced opeig force 4110 closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to AUTOMATIC OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH 36 42 48 8.5* lbs. 4111 4111 4111 5.0* lbs. 4111 4111 4111 * Maximum opeig force. LCN Door Cotrol Catalog 69

Notes 70 LCN Door Cotrol Catalog

4110T Features The 4110T is LCN s best performig heavy duty track closer desiged specifically for iterior doors i istitutioal ad other high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 11/16 Diameter Double Heat Treated Piio Joural All Weather Fluid Haded Size Adjustable Sprig Size 1-5, or Sized 6. Icludes Pateted Gree Dial Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Stop Face (Push Side) Stadard Arm ad Track with Roller Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING PARALLEL ARM STOP FACE POWDER COAT PLATED FINISH PLASTIC METAL COVER CYLINDER *ARM FUNCTION NON-HANDED NON-SIZED ACCESSIBILITY DELAYED ACTION AVB 110 100 REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. LCN Door Cotrol Catalog 71

4110T Moutig details Stop face (Push Side) Moutig 2" 51 mm 1-7/16" 37 mm 22-3/4" 578 mm 3-11/16" 94 mm 1-1/16" 27 mm 2-1/4" 57 mm 1-1/4" 32 mm 7/16" 11 mm 12-1/4" 311 mm 3-1/2" 89 mm 4110T-18 Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 110. Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door It is ot iteded to replace a auxiliary stop Clearace Projects 2-1/4 (57 mm) from face of door Top Rail Less tha 5-1/4 (133 mm) measured from the stop, requires PLATE, 4110T-18 Plate requires 2-1/4 (57 mm) miimum Stop Width Maximum Opeig Miimum 1-1/4 (32 mm) Templatig allows 110 with stadard track arm, limited to 100 with optioal bumper tracks Variable hold-ope agles with ifiite optios Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the 180 130 rage Cosult factory for applicatios where door must swig 180 72 LCN Door Cotrol Catalog

4110T Accessories Cylider Covers 4111(6)T-3071 Cast Iro Cylider Assembly 4110T-72 Plastic Cover 4110T-72MC Metal Cover Haded No-haded Haded Stadard Stadard Required for plated fiishes ad custom powder coat fiishes Optioal Arm 4110T-3077T Stadard Haded Roller ot icluded with arm Tracks 4110T-3038 Stadard Track 4110T-3038B Stadard Track with Bumper 4110T-3038H Hold-Ope Track 4110T-3038HB Hold-Ope Track with Bumper No-haded No-haded No-haded No-haded No hold-ope Will accept hold-ope clip ad/ or bumper assembly Stadard No hold-ope With bumper assembly istalled Will accept hold-ope clip With hold-ope clip istalled Will accept bumper assembly Optioal With hold-ope clip ad bumper assembly istalled Optioal Optioal LCN Door Cotrol Catalog 73

4110T Accessories Istallatio Accessories 4110T-18 Plate 4110T-169 Track Bumper 4110T-3054 Hold-Ope Clip 4110T-3034 Track Roller Required where top rail, whe measured from the stop, is less tha 5-1/4 (133 mm) Requires miimum 2-1/4 (57 mm) miimum top rail Mouts i track to assist backcheck, ot replace auxiliary stop Limits maximum opeig. Cosists of bumper, bumper post, ad moutig screw Mouts i track to provide holdope fuctio Hold-ope poit cotrolled by clip locatio Cosists of clip ad moutig screws Quiet, low frictio roller assembly Shoulder dimesio X = 1/16 (2 mm) Requires 4110T-3034H Track Roller 4110T-3034H Track Roller Quiet, low frictio roller assembly Shoulder dimesio X = 1/16 (2mm) Sprig-loaded hold-ope mechaism 74 LCN Door Cotrol Catalog

4110T How-to-order 4110T closers 1. Specify cylider size 4111T (ADA) 4113T 4114T 2. Specify had RH LH 3. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass Closer will be shipped with: - Stadard cover - Stadard arm - Track roller - Stadard track - Self-reamig ad tappig screws uless optios listed below are selected. Orderig Iformatio Closer optios Cover Metal (MC) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Table of sizes Specify Track Stadard with Bumper (BUMPER) Hold-Ope (HO) Hold-Ope with Bumper (HBUMPER) Specify Screw Packs TB* w/self-reamig ad Tappig (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTRX) * Specify door thickess if other tha 1-3/4. Istallatio Accessories Plate, 4110T-18 Special Template ST- Select closer based o width of door Sized 4110T series cyliders available i size 1, 3 or 4 Closig power of all 4110T closers may be icreased 15% Specify ext higher size closer where strog drafts exist Iterior door width 26 660mm 34 864mm 38 965mm 48 1219mm 4113T 4114T size 1 size 3 size 4 Miimum door width Idicates recommeded rage of door width for closer size. Reduced opeig force 4110T closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to POWER OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH 36 42 48 8.5* lbs. N/A N/A N/A 5.0* lbs. 4111T 4111T 4111T * Maximum opeig force. LCN Door Cotrol Catalog 75

Notes 76 LCN Door Cotrol Catalog

4000T Features The 4000T is a heavy duty closer to reliably cotrol fire ad smoke barrier doors with maximum swig of 90. Desiged for use with a SEM 7850 wall maget. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearig 1-1/2 Diameter Pisto 3/4 Diameter Double Heat Treated Piio Joural All Weather Fluid No-Haded Size Sized 3 or 4 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Wood ad machie screw pack I a wall pocket, hige side Stadard Arm ad Track with Roller Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING FINISH COVER CYLINDER *ARM FUNCTION PARALLEL ARM STOP FACE POWDER COAT PLATED PLASTIC METAL NON-HANDED NON-SIZED ACCESSIBILITY DELAYED ACTION AVB REGULAR (DOUBLE) STANDARD (SINGLE) 90 HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS AVAILABLE NOT AVAILABLE * Maximum opeig/hold-ope poit with stadard template. LCN Door Cotrol Catalog 77