An ASSA ABLOY Group brand Series. Architectural Door Closer

An ASSA ABLOY Group brand 3000 Series Architectural Door

the perfect choice The Yale 3000 Series Architectural Door s offer the perfect combination of reliability, appearance and durability in today s market. With features such as staked valves, self-drilling/self-tapping screws, rack and pinion design and precise valve adjustment, and a complete range of arm and cover options, the Yale 3000 can meet virtually any application challenge. This U.L. listed, ANSI Grade 1 closer has a long history of proven quality. It is the ideal choice for upscale facilities that demand superior performance such as: conference centers, office buildings, courthouses, religious facilities, banks, nursing homes, restaurants, hotels and medical offices. finishes Product will be painted with a combination of waterborne acrylic and polyester powder coat. s will withstand 100 hours of salt spray. (The ANSI requirement is 25 hours.) contents Introduction... 2 Overview... 3 Features...4-5 Optional Features... 6 Applications...7-9 Technical Details...10-23 Accessories...24-35 Parts List...36-47 Suggested Specifications... 48 How To Order... 49 Sprayed Finishes Description Specify Designation (BHMA) Complements the following finishes Old Designation Aluminum 689 625, 628, 629, 630, 651, 652 SB Statuary Bronze 690 613, 640, 695 STAT Dull Bronze 691 612, 637, 639 BL Black 693 315 315 Medium Amber 694 312 312 Gold 696 605, 606, 632, 633 GB Prime Coat 600* SRI * 600 is a special rust inhibiting prime coast. s can be ordered prime coat only (specify closer x 600). An additional charge applies if finish coat is required over prime coat (ex: 3501 x 600 x 689). d Finishes* Old Designation Bright Brass 605E Yes Yes US3 Satin Brass 606E Yes Yes US4 Bright Bronze 611E Yes Yes US9 Satin Bronze 612E Yes Yes US10 Oxidized Oil Rubbed Bronze 613E Yes Yes US10B Bright Chrome 625E Yes Yes US26 Satin Chrome 626E Yes Yes US26D * When a plated finish is ordered, arm and cover will be plated unless cover only is specified. 3100/3300 - available with plated arm only. 2

overview Cutaway View Spring Power Adjustment Shaft Aluminum Alloy Shell Piston Latch Speed Regulating Valve Sweep Speed Regulating Valve End-View Backcheck Intensity Regulating Valve Pinion Optional: DL Delayed Action Closing Regulating Valve Latch Speed Regulating Valve Sweep Speed Regulating Valve CAUTION: Door s for Low Opening Force Applications: Door closers installed in openings required to meet the requirements of The Americans with Disabilities Act or ANSI Standard A117.1, when adjusted to meet those requirements, may not provide adequate closing power to dependably close and latch the door. compliance standards Series 3301 and 3501 door closers are designed to comply with requirements of the Americans with Disabilities Act (A.D.A.) and ANSI standard A117.1. All series 3300/3500, 3301/3501 are ANSI/BHMA A156.4 Grade 1 certified. All Yale series 3300/3500, 3301/3501 closers with non-hold open arms are listed by Underwriters Laboratories for labeled fire doors. This includes compliance to UL10C for 3-hour assemblies. The product is manufactured in an ISO 9001 facility. These closers are also listed with the New York City Materials and Equipment Acceptance Division. standard on all 3000 series closers Features Cast aluminum body Non-handed Staked valves Rack & pinion design 1-1/4" (32mm) diameter piston 5/8" (16mm) diameter pinion journals Separate and independent, latch, sweep and backcheck intensity valves 2-1/8" (54mm) projection (standard covers) All standard arm applications (with slim, full or metal covers) allow doors to swing 180 degrees, conditions permitting 3300/3301 - shipped with slimline plastic cover 3500/3501 - shipped with full cover 10-year limited warranty Optional Features and architectural covers (3500 or 3501 only) Heavy-duty arms: Regular Rigid, Parallel Rigid, Holder/Stop, Holder/Stop Spring, UNI Stop Delayed action Slide tracks (push or pull side mounting) Lead-lined metal cover (suffix MLL) Additional Features 3300 3500 3301 3501 Sized springs 2, 3, 4, 5, 6 with 50% additional adjustment Adjustable spring sizes 1 through 6 Bi-packed (regular arm and top jamb mounting) Tri-packed (regular arm, top jamb and parallel arm mounting) X X X X X X X X 3

fasteners/features Arm Type Description RA PA TJ Low Profile PR Holder/Stop, Holder/Stop Spring UNI UNI-J Slide Track DOOR SDST Self Drilling Self Tapping S S S S S S S S S MS Machine Screw S S S S S S S S S SN Sleeve Nut O O O O S S S S S TBGN Through-Bolts & Grommet Nuts O O O O O O O O O SMS Sheet Screws O O O O O O O O O Torx Torx Drive Security Screw O O O O O O O O O FRAME SDST Self Drilling Self Tapping S S S S S S S S S MS Machine Screw S S S S S S S S S SMS Sheet Screws O O O O O O O O O Torx Torx Drive Security Screw O O O O O O O O O S = standard; O = optional SN are for use on unreinforced hollow metal doors or to prevent any hollow metal door from collapse/dimpling. They can also be used for thru bolting on wood doors. SN are supplied for 1-3/4" (44mm) thick doors unless specified for 2-1/4" (57mm) thick doors. TBGN are an alternative to SN for wood doors. TBGN are supplied standard for 1-3/4" (44mm) thick doors. They can be specified for 1-3/8" (35mm) thick doors. SMS - when specified, closer will be packed with sheet metal screws for the door AND sheet metal screws plus machine screws for the frame. TORX screws with security pin are standard with Security Door s. Torx may be specified for all other series applications. Torx are only available with machine screw threads. Sheet metal screw threads or wood screw threads are not available. Note: To order special fasteners with closers, specify model number x fastener (Ex: 3501 x 689 x TBGN) features Aluminum Alloy Housing bodies are constructed of a special aluminum alloy, carefully selected to accommodate interactive steel components and operating conditions. Rack & Pinion Operation Provides a smooth constant control of the door through its full opening and closing cycle. 180 door swing can be achieved when door, frame, hardware and arm function do not interfere. Non-handed With few exceptions all series 3300/3500 and series 3301/3501 door closers are non-handed and can be installed on either right or left hand swing doors. Pinion shaft extends vertically through the closer body in both directions. Some options, as noted on page 5, will require that the hand of the closer be specified. Sweep Speed Control Valve Allows adjustment of door speed from the door's full open position down to approximately 10 from the closed position. Latch Speed Control Valve Allows adjustment of door speed from approximately 10 down to the door s fully closed position. Fluid All door closers are supplied with a temperature stable, multi-viscosity fluid. This fluid will permit the door closer to perform within a wide temperature range: from very high to as low as -40 F. Tri-Packed 3301/3501 come with screws, brackets and soffit plates to allow for regular, top jamb, and parallel arm installations. Adjustable Backcheck Valve Provides control of the door in the opening cycle, beginning at approximately 75 of door opening. It cushions the door opening when the door is forcibly opened beyond its pre-adjusted limits. Standard Molded s Molded of high-impact U.L. listed material. Standard covers are non-handed for all applications. See page 5 for optional covers. Warranty Limited ten-year warranty for defects and life of the building on the aluminum housing. 4

features (cont.) door closer power options Series 3300/3500 Sized Door Available in five different power sizes (2, 3, 4, 5 or 6). Each power size is adjustable up to 50% stronger than the minimum closing force for that size, as outlined in ANSI/BHMA standard A156.4. Series 3301/3501 Multi-Sized Door Adjustable through the power range of sizes 1 through 6, as outlined in ANSI/BHMA specification A156.4. The series 3000 also conforms to the minimum opening force requirements of the Americans with Disabilities Act (A.D.A) and ANSI/BHMA standard A117.1 for interior doors. optional covers Optional This steel cover is non-handed for regular and parallel arm applications, but is handed for top jamb applications. is available in sprayed or plated finishes. Optional Architectural s* : Architectural plastic covers are molded of high-impact U.L. listed material. They are non-handed and available in sprayed finishes. : The architectural metal covers are steel and non-handed for all applications. These covers are available in sprayed or plated finishes. * For Parallel Arm Applications Consult factory for doors swinging more than 120 Optional ABS Consult factory for details. 5

optional features delayed action Adjustable Delayed Action Closing An optional hydraulic feature that adds a third speed range to the closing cycle. This feature becomes effective when the door is opened and released at any point beyond 70. The amount of time delay depends upon the combination of the angle of door release and valve adjustment. The valve can be adjusted with a 1/8" (3mm) hex key from no delay time up to maximum delay times of: Door Opened and Released at Approximate Time of Delay Cycle 180 4-5 minutes 120 2-3 minutes 90 25-30 seconds Pressure Relief Safety Valve The delayed action hydraulic system contains a pressure relief valve. Any time the door is forced toward the closed direction while it is in the closing cycle, the valve will open and permit the door to close. This prevents damage to door, frame and closer. arms Non-Hold Open Self-closes door every time door is opened. Auxiliary stop (by others) required except when using the Holder/ Stop, Holder/Stop Spring or UNI Stop arms. Suggested Applications Delayed Action closing allows slow-moving traffic to clear the opening before the door closer s normal closing cycle begins. This feature can be helpful in health care facilities such as hospitals and nursing homes. It provides sufficient time for persons on crutches or in wheelchairs to pass through a door without concern of it closing. At the same time, it can accommodate the facility's staff with movement of food service carts, beds, and other wheeled traffic. Use of delayed action closers on many doors throughout industrial and commercial buildings can also assist the flow of traffic. Locations where additional time to clear the opening is advantageous are doors between office and factory/ warehouse facilities, doors to workshops or laboratories, kitchens and food processing areas. Hold Open Achieved by means of friction or ball and detent/ roller. Friction hold open has a range of 90 to 180 using template location and mechanical adjustment. Ball and detent or roller hold open is effective in a range of 85 to 110. Door Opening Degrees Hold open arm door closers are not permitted to be used on fire door assemblies. Arm Function Regular Arm, Top Jamb, Parallel Arm Parallel Rigid Arm Holder/Stop Parallel Arm Holder/ Stop Spring Parallel Arm UNI Stop Parallel Arm UNI Stop Top Jamb Low Profile Slide Track Non-Hold Open 3 3 85 to 110 85 to 110 85 to 110 85 to 110 3 85 to 110 /180 Hold Open 90 to 180 85 to 180 85 to 110 85 to 110 85 to 110 85 to 110 N/A 85 to 110 3=180 trim and template permitting 6

applications Regular Arm 3301 This is the only pull side application where a double lever arm is used. It is the most power-efficient application for a door closer. Sufficient frame, door and/or ceiling clearance must be considered. 3501 Since the arm assembly projects directly out from the frame, this application may present an aesthetics issue or be prone to vandalism. Top Jamb 3301 For efficiency reasons this application provides the best alternative to the regular arm application. There must be sufficient frame face and/or ceiling clearance for this application. It requires a top rail on the door of just 2-1/4" (57mm). This application provides the best door control for doors in exterior walls that swing out of a building. 3501 The entire door closer and arm assembly project from the frame, similar to the regular arm application, where matters of appearance and malicious abuse can be of concern. Consideration must be given to depth of reveal. Parallel Arm 3301 This application provides the most appealing design appearance for a surface-mounted door closer having a double lever arm. This also makes it beneficial in vandalism-prone areas. It is on the push side of the door and the arm assembly extends almost parallel to the door. In the closed position, there is very little or no hardware projecting beyond the frame face in most situations. 3501 Due to the geometry of the arm it is approximately 25% less power-efficient than a regular arm application. The entire closer and arm assembly are mounted below the frame stop. Top rail clearance dimensions will vary based on the type of cover used. (See page 13.) 7

applications Parallel Rigid Arm An enhanced variation of the standard parallel arm assembly that is intended for use in heavy traffic areas where auxiliary door stops are installed. Hold open available specify hand when ordering. Non-hold open arm shown Hold open arm shown Holder/Stop Arm Similar to the Parallel Rigid arm, this arm incorporates a stop at the arm s soffit plate to dead stop the door at a predetermined degree of door swing between 85 and 110, in 5 increments. Prior to dead stop the door closer s backcheck feature slows the door speed to reduce the impact of the stop action. The Holder/Stop arm is intended for use where an auxiliary door stop cannot be utilized and no more than moderate abuse is anticipated. Where more extreme conditions are expected, use of a UNI Stop arm is recommended. Available with or without hold open. (Hold open strength is adjustable.) Holder/Stop Spring Arm This arm has all the characteristics of the Holder/Stop arm with an additional steel buffer spring that providesgreater protection at the end of the door opening cycle. For extreme conditions, use of a UNI Stop arm is recommended. Available with or without hold open. Regular Rigid Heavy-Duty Arm This double lever arm features a non-adjustable secondary arm. Orbitally riveted joints prevent tampering or disassembly. Prefix "R" to model number. Available non-hold open only. 8

applications UNI Stop Arm Parallel Top Jamb Can be used for either parallel arm or top jamb applications. UNI Stop arms combine the features of a double lever arm overhead door stop/holder with the backcheck feature of the door closer to reduce door stopping shock loads to a minimum. This arm uses a compression spring buffer at the soffit plate/arm shoe that absorbs 30 lbf. of force, 5 prior to the door s dead stop. The UNI Stop arm, coupled with the door closer's backcheck feature, proves the most controlled stop available with a surface door closer. For parallel arm applications there are three different length arm assemblies. Each length is designed for a specific range of door widths, to provide precise door control. This further lessens the dead stop impact on the door s hinges/pivots. Pull side Slide Track Whether pull or push side mounted, slide track provides the designer with the smoothest lines available in a surface-mounted door closer. The single lever arm allows components to be located in a stack configuration to minimize projection and eliminate obtrusive arm angles. The arm geometry reduces door closer power efficiency by approximately 25% from that of a regular arm. Push side Standard unit: Adjustable 85-110 (hold open and non-hold open). Track is supplied with a spring buffered stop. An auxiliary stop, by others, is required. Specify if hold open unit is required. 180 swing (non-hold open, pull side only) is also available. This track assembly requires that a door stop, by others, be supplied to stop the door. Regular Arm Allows closer to be installed where there is as little as 1" (25mm) of frame face ceiling clearance Parallel Arm Allows closer to be installed 1/2" (13mm) higher up on door than standard parallel arm application. Low Profile Arm Supplied with 3380/3580, 3381/3581 series door closers for non-hold open installations only. Low profile arms have a reduced height elbow joint and a straight main arm. This enables the door closer to be installed in less vertical space. Note: Low profile arm door closers are not supplied tri-packed. 9

technical details regular arm C L Hinge B E C Full K Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Maximum 180º door swing, conditions permitting Series s E Minimum Ceiling Clearance NHO Low Profile HO B Minimum Top Rail W/O W/3146 NHO/ HO Low Profile NHO/ HO Low Profile H A Minimum Top Rail Clearance NHO/ HO Low Profile 2-1/8"* (54mm) C Template Position for 100 Door Opening K Length A H Height 3100 No 7-1/8" (181) 3300 Slim Line 3-1/2" 3-3/8" (89) (86) 7" 3500 Full (178) 3500M 3500A 3500MA 1-1/2" (38) 1" (25) 1-5/8" (41) 2-1/2" (64) 2-3/8" (60) 1-5/8" (41) 1-1/2" (38) 4-1/4" (108) 3-5/8" (92) 3-1/2" (89) 4-1/8" (105) 6-3/4" (171) 3-1/2" (89) 6-1/2" 3-3/8" (165) (86) 12-3/4" (324) 13" (330) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-3/4" (95) 3-1/8" (79) 3" (76) Door Widths Inches (cm) Sized s Model Numbers Multi-Sized s Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open 30" (76) N/A 3302, 3502 3312, 3512 36" (91) 30" (76) 3303, 3503 3313, 3513 48" (122) 36" (91) 3304, 3504 3314, 3514 N/A 48" (122) 3305, 3505 3315, 3515 Unusual 3306, 3506 3316, 3516 3301 3501 3311 3511 Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 10

technical details top jamb arm C C L Hinge K Full 2-1/8"* (54mm) F H Reveal E A Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Series s F Minimum Frame Face E Minimum Ceiling Clearance A Minimum Top Rail Clearance W/O W/3146 With 3148/3547 C Template Position for 100 Door Opening K Length H Height W/O With 3146 With 3148, 3158, 3547 & 3547A s W/O With 3146 With 3148, 3158, 3547 & 3547A s NHO Low Profile HO NHO Low Profile HO NHO Low Profile HO 3100 No 7-1/8" (181) 12-3/4" (324) 3300 3500 3500M Slim Line Full 1-3/4" (44) 1-1/8" (29) 1-1/2" (38) 1-5/8" (41) 2-3/4" (70) 3-3/4" (95) 1-5/8" (41) 1-1/2" (38) 1-5/8" (41) 2-1/4" (57) N/A 2-1/2" (64) 3-3/8" (86) 2-3/4" (70) 3-5/8" (92) 4-3/8" (111) 3-3/4" (95) 4-5/8" (117) 7" (178) 6-3/4" (171) 13" (330) 13-5/8" (346) 2-7/8" (73) 3-3/4" (95) 3500A 3500MA N/A 1-1/2" (38) 3" (76) 2-7/8" (73) N/A 1-1/2" (38) 6-1/2" (165) 14" (356) 3-1/8" (79) 3" (76) Note: Reveal range information is based upon 1-3/4" (44mm) doors hung on 4-1/2" wide hinges. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 11

technical details top jamb arm Door Widths Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open 30" (76) N/A TJ3302, TJ3502 TJ3312, TJ3512 36" (91) 30" (76) TJ3303, TJ3503 TJ3313, TJ3513 48" (122) 36" (91) TJ3304, TJ3504 TJ3314, TJ3514 N/A 48" (122) TJ3305, TJ3505 TJ3315, TJ3515 Unusual TJ3306, TJ3506 TJ3316, TJ3516 3301 3501 3311 3511 Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. Reveal Information Sized s Reveal Range Inches (mm) Maximum Door Opening NHO Hold Open TJ3000 2-3/4" (70) to 7" (178) 150 TJ3010 2-3/4" (70) to 6-3/4" (171) 150 Multi-Sized s TJ3301, TJ3501 2-3/4" (70) to 4-1/4" (108) 180 TJ3301, TJ3501 4-1/4" (108) to 7" (178) 150 TJ3311, TJ3511 2-1/8" (54) to 4-1/4" (108) 180 TJ3311, TJ3511 4-1/4" (108) to 6-3/4" (171) 150 Sized s Reveal Information (regular arm installed top jamb) Reveal Range Inches (mm) Maximum Door Opening NHO Hold Open 3000 0 to 2-7/8" (73) 180 3080 w/ ** 0 to 2-3/4" (70) 180 3010 0 to 2-3/4" (70) 180 Multi-Sized s 3301, 3501 0 to 2-7/8" (73) 180 3301, 3501 w/ 0 to 2-3/4" (70) 180 3311, 3511 0 to 2-3/4" (70) 180 ** 3146, 3148, 3158, 3547 or 3547A Note: Reveal range information is based upon 1-3/4" (44mm) doors hung on 4-1/2" wide hinges. 12

technical details parallel arm 5/8" (16mm) Ref. B H A C Full K D Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Maximum 180º door swing, conditions permitting. 2-1/8"* (54mm) Series s NHO 5-1/4" (133) B Minimum Top Rail 5/8" (16mm) Frame Stop W/O With 3148/3548 Low Profile 4-5/8" (117) HO NHO Low Profile 5-1/4" (133) 3" (76) 2-3/8" (60) A Top Rail Clearance HO NHO Low Profile 3" (76) HO C Template Position for 120 Door Opening 3-3/8" 3100 No (86) Slim Line 6-1/4" 5-5/8" 6-1/4" 3300 (159) (143) (159) 3-1/4" (83) 3500 Full 3500M 3500A 3500MA 6-7/8" (175) 6" (152) 5-7/8" (149) 6-1/4" (159) 5-3/8" (137) 5-1/4" (133) 6-7/8" (175) 3" (76) 6" (152) 2-3/4"^ 5-7/8" (70) (149) K Length 12-3/4" (324) 13" (330) 13-5/8" (346) 14" (356) H Height 2-7/8" (73) 3-3/4" (95) 3-1/8" (79) 3" (76) D Arm Extension 8-1/8" (206) 8" (203) 7-5/8" (194) ^Not available for doors that swing to 180. Door Widths Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open 30" (76) N/A PA3302, PA3502 PA3312, PA3512 36" (91) 30" (76) PA3303, PA3503 PA3313, PA3513 42" (107) 36" (91) PA3304, PA3504 PA3314, PA3514 48" (122) 42" (107) PA3305, PA3505 PA3315, PA3515 N/A 48" (122) PA3306, PA3506 PA3316, PA3516 3301 3501 3311 3511 Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 13

technical details parallel rigid arm C L Hinge 5/8" (16mm) Ref B A H Full C K D Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. 2-1/8" * (54mm) Series s B Minimum Top Rail W/O With A Minimum Top Rail Clearance C Template Position for Hold Open or Stop at Listed Angle Holder-Stop 3020 Series 85 90 95 100 105 110 To 180 K Length H Height D Arm Extensions 3100 No 12-3/4" (324) 3300 3500 3500M 3500A 3500MA Slim Line 5-7/8" (149) 5" (127) 4-1/8" (105) 3-1/2" (89) 2-3/4" (70) 2-1/4" (57) 1-5/8" (41) 3-1/8" (79) 13" (330) Full 4-5/8" (117) 2-3/8" (60) 6-1/2" (165) 4-3/4" (121) 6" (152) 4-5/8" 5-7/8" (117) (149) 3-7/8" (98) 3-3/4" (95) 3-1/4" (83) 3-1/8" (79) 2-1/2" (64) 2-3/8" (60) 2" (51) 1-7/8" (48) 1-3/8" (35) 1-1/4" (32) 2-7/8" (73) 2-3/4"^ (70) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-7/8" (98) 8" (203) 7-5/8" (194) 3-1/8" (79) 7-1/2" 3" (191) (76) ^Not available for doors that swing to 180. Door Size (Wood or ) Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Stop Only Hold Open Stop Only Hold Open 28" (71) - 32" (81) N/A PR3302, PR3502 PR3312, PR3512 33" (84)- 36" (91) 28" (71)- 32" (81) PR3303, PR3503 PR3313, PR3513 37" (94)- 41" (104) 33" (84)- 36" (91) PR3304, PR3504 PR3314, PR3514 42" (107)- 48" (122) 37" (94)- 41" (104) PR3305, PR3505 PR3315, PR3515 N/A 42" (107)- 48" (122) PR3306, PR3506 PR3316, PR3516 PR3301 PR3501 PR3311 PR3511 Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 14

technical details holder/stop arm C L Hinge 5/8" (16mm) Ref B A H Full C K D Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. 2-1/8" * (54mm) Series s B Minimum Top Rail W/O With A Minimum Top Rail Clearance C Template Position for Hold Open or Stop at Listed Angle 85 90 95 100 105 110 K Length H Height D Arm Extensions 3100 No 12-3/4" (324) Slim Line 5-7/8" 5" 4-1/8" 3-1/2" 2-3/4" 2-1/4" 1-5/8" 3300 (149) (127) (105) (89) (70) (57) (41) 13" (330) 3500 Full 3500M 3500A 3500MA 4-5/8" (117) 2-3/8" (60) 6-1/2" (165) 4-3/4" (121) 6" (152) 4-5/8" 5-7/8" (117) (149) 3-7/8" (98) 3-3/4" (95) 3-1/4" (83) 3-1/8" (79) 2-1/2" (64) 2-3/8" (60) 2" (51) 1-7/8" (48) 1-3/8" (35) 1-1/4" (32) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-7/8" (98) 8" (203) 7-5/8" (194) 3-1/8" (79) 7-1/2" 3" (191) (76) Door Size (Wood or ) Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Stop Only Hold Open Stop Only Hold Open 28" (71) - 32" (81) N/A 3322, 3522 3322T, 3522T 33" (84)- 36" (91) 28" (71)- 32" (81) 3323, 3523 3323T, 3523T 37" (94)- 41" (104) 33" (84)- 36" (91) 3324, 3524 3324T, 3524T 42" (107)- 48" (122) 37" (94)- 41" (104) 3325, 3525 3325T, 3525T N/A 42" (107)- 48" (122) 3326, 3526 3326T, 3526T 3321 3521 3321T 3521T Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 15

technical details holder/stop spring arms C L Hinge 5/8" (16mm) Ref B A H Full C K D Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. 2-1/8"* (54mm) Series s B Minimum Top Rail W/O With A Minimum Top Rail Clearance C Template Position for Hold Open or Stop at Listed Angle 85 90 95 100 105 110 K Length H Height D Arm Extensions 3100 No 12-3/4" (324) Slim Line 5-7/8" 5" 4-1/8" 3-1/2" 2-3/4" 2-1/4" 1-5/8" 3300 (149) (127) (105) (89) (70) (57) (41) 13" (330) 3500 Full 3500M 3500A 3500MA 4-5/8" (117) 2-3/8" (60) 6-1/2" (165) 4-3/4" (121) 6" (152) 4-5/8" 5-7/8" (117) (149) 3-7/8" (98) 3-3/4" (95) 3-1/4" (83) 3-1/8" (79) 2-1/2" (64) 2-3/8" (60) 2" (51) 1-7/8" (48) 1-3/8" (35) 1-1/4" (32) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-7/8" (98) 8" (203) 7-5/8" (194) 3-1/8" (79) 7-1/2" 3" (191) (76) Door Size (Wood or ) Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Stop Only Hold Open Stop Only Hold Open 28" (71) - 32" (81) N/A 3332, 3532 3332T, 3532T 33" (84)- 36" (91) 28" (71)- 32" (81) 3333, 3533 3333T, 3533T 37" (94)- 41" (104) 33" (84)- 36" (91) 3334, 3534 3334T, 3534T 42" (107)- 48" (122) 37" (94)- 41" (104) 3335, 3535 3335T, 3535T N/A 42" (107)- 48" (122) 3336, 3536 3336T, 3536T 3331 3531 3331T 3531T Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 16

technical details regular rigid heavy-duty arm C L Hinge 5/8" (16mm) Ref B E H A C Full K 2-1/8" * (54mm) Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Series s E Minimum Ceiling Clearance B Minimum Top Rail W/O W/3146 A Minimum Top Rail Clearance C Template Position for 100 Door opening K Length H Length Door Size (Wood or ) Inches (cm) Model Number Non-Hold Open Only Interior Exterior Sized s Multi-Sized s 36" (91) 30 (76) R3302, R3502 NHO NHO NHO NHO 7-1/8" 3100 No (181) Slim Line 3-1/2" 3300 (89) 7" (178) 3500 Full 3500M 3500A 3500MA 1-3/4" (44) 2-1/2" (64) 1-5/8" (41) 4-1/4" (108) 6-3/4" (171) 3-5/8" (92) 6-1/2" 3-1/2" (165) (89) 12-3/4" (324) 13" (330) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-3/4" (95) 3-1/8" (79) 3" (76) 42" (107) 36" (91) R3303, R3503 46" (117) 42" (107) R3304, R3504 54 (137) 48 (122) R3305, R3505 R3301 R3501 N/A 52" (132) R3306, R3506 Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 17

technical details uni stop - parallel arm C L Hinge 5/8" (16mm) Ref Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. B A H Full C K D 2-1/8" (54mm) Series 3300 3500 3500M 3500A 3500MA 3500 3500M 3500A 3500MA 3500 3500M 3500A 3500MA Door Width 28-32 33-41 42-48 28-32 33-41 42-48 s Slim Line Full Full Full B Minimum Top Rail W/O 4-3/4" (121) With 2-1/2" (64) A Minimum Top Rail Clearance 5-3/4" (146) 6-3/8" (162) C - Template Position for Hold Open or Stop at Listed Angle 85 90 95 100 105 110 4-5/8" (117) 7" (178) 9-1/4" (235) 4-5/8" (117) 4-3/8" (111) 5-1/2" (140) 7-5/8" 5-3/8" (194) (137) 5-3/4" (146) 6-3/8" (162) 7" (178) 6-3/4" (171) 5-1/2" (140) 10" 5-3/8" (254) (137) 5-3/4" (146) 6-3/8" (162) 9-1/4" (235) 9" (229) 5-1/2" (140) 12-1/4" 5-3/8" (311) (137) 4" (102) 6-1/4" (159) 8-3/8" (213) 4" (102) 3-3/4" (95) 7" (178) 6-1/4" (159) 6" (152) 9-3/8" (238) 8-3/8" (213) 8-1/8" (206) 11-1/2" (292) 3-1/2" (89) 5-3/4" (146) 7-3/4" (197) 3-1/2" (89) 3-1/4" (83) 6-1/2" (165) 5-3/4" (146) 5-1/2" (140) 8-3/4" (222) 7-3/4" (197) 7-1/2" (191) 10-7/8" (276) 3-1/8" (79) 5-1/4" (133) 7-1/8" (181) 3-1/8" (79) 2-7/8" (73) 6-1/8" (156) 5-1/4" (133) 5" (127) 8-1/4" (210) 7-1/8" (181) 6-7/8" (175) 10-1/4" (260) 2-3/4" (70) 4-3/4" (121) 6-5/8" (168) 2-3/4" (70) 2-1/2" (64) 5-3/4" (146) 4-3/4" (121) 4-1/2" (114) 7-3/4" (197) 6-5/8" (168) 6-3/8" (162) 9-3/4" (248) 2-3/8" (60) 4-3/8" (111) 6-1/4" (159) 2-3/8" (60) 2-1/8" (54) 5-3/8" (137) 4-3/8" (111) 4-1/8" (105) 7-3/8" (187) 6-1/4" (159) 6" (152) 9-1/4 (235) K Length 13" (330) 13-5/8" (346) 14" (356) 13" (330) 13-5/8" (346) 14" (356) 13" (330) 13-5/8" (346) 14" (356) H Height 2-7/8" (73) 3-7/8" (98) 3-1/8" (79) 3" (76) 2-7/8" (73) 3-7/8" (98) 3-1/8" (79) 3" (76) 2-7/8" (73) 3-7/8" (98) 3-1/8" (79) 3" (76) D Arm Extensions 8-3/8" (213) 9-7/8" (251) 11-1/4" (286) 8-3/8" (213) 8" (203) 7-7/8" (200) 7-1/2" (191) 9-7/8" (251) 9-1/2" (241) 9-3/8" (238) 9" (229) 11-1/4" (286) 10-7/8" (276) 10-3/4" (273) 10-3/8" (264) Door Widths (Wood or ) Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Stop Only Hold Open Stop Only Hold Open 28" (71) - 32" (81) N/A UNI3302, UNI3502 UNI3312, UNI3512 33" (83) - 36" (91) 28" (71) - 32" (81) UNI3303, UNI3503 UNI3313, UNI3513 37" (94) - 41" (104) 33" (83) - 36" (91) UNI3304, UNI3504 UNI3314, UNI3514 42" (107) - 48" (122) 37" (94) - 41" (104) UNI3305, UNI3505 UNI3315, UNI3515 N/A 42" (107) - 48" (122) UNI3306, UNI3506 UNI3316, UNI3516 UNI3301 UNI3501 UNI3311 UNI3511 x Specify Door Width 18

technical details uni stop - top jamb arm CL Hinge C F K Full 5/8" (16mm) Ref 2-1/8" * (54mm) Reveal H E 4-5/8" (117mm) A Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Series s F Minimum Frame Face E Minimum Ceiling Clearance A Minimum Top Rail Clearance C Template Position for Hold Open or Stop at Listed Angle K Length H Height W/O With 3148, 3158, 3547 & 3547A s W/O With W/O With 3148, 3158, 3547 & 3547A s 85 90 95 100 105 110 3300 3500 Slim Line Full 1-1/2" (38) 2-3/4" (70) 1-1/2" (38) 9-1/2" (241) 8-7/8" (225) 8-1/4" (210) 7-3/4" (197) 7-3/8" (187) 7" (178) 13" (330) 2-7/8" (73) 3500M 1-3/4" (44) 1-5/8" (41) 3-3/4" (95) 1-5/8" (41) 1-7/8" (48) 3-3/4" (95) 9-1/4" (235) 8-5/8" (219) 8" (203) 7-1/2" (191) 7-1/8" (181) 6-3/4" (171) 13-5/8" (346) 3-7/8" (98) 3500A 3500MA 1-1/2" (38) 3" (76) 2-7/8" (73) 1-1/2" (38) 8-7/8" (225) 8-1/4" (210) 7-5/8" (194) 7-1/8" (181) 6-5/8" (168) 6-1/4" (159) 14" (356) 3-1/8" (79) Door Widths (Wood or ) Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Stop Only Hold Open Stop Only Hold Open 28" (71) - 30" (76) N/A UNIJ3302, UNIJ3502 UNIJ3312, UNIJ3512 31" (79) - 36" (91) 28" (71) - 30" (76) UNIJ3303, UNIJ3503 UNIJ3313, UNIJ3513 37" (94) - 42" (107) 31" (79) - 36" (91) UNIJ3304, UNIJ3504 UNIJ3314, UNIJ3514 43" (109) - 48" (122) 37" (94) - 42" (107) UNIJ3305, UNIJ3505 UNIJ3315, UNIJ3515 N/A 43" (109) - 48" (122) UNIJ3306, UNIJ3506 UNIJ3316, UNIJ3516 UNIJ3301 UNIJ3501 UNIJ3311 UNIJ3511 x Specify Frame Reveal Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 19

technical details pull side slide track C L Hinge 3-1/2" (89mm) 23" (584mm) 1-1/2" (38mm) 1-1/2" (38mm) 2" (51mm) E 1-1/2" (38mm) H B C Full K 2-1/8"* (54mm) Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Series E Minimum Top Rail W/O With 3146 B Minimum Top Rail Clearance Slim or Full Slim or Full C Template Position Slim or Full K Length Slim or Full H Height 3300ST 2-1/2" (64) 1-5/8" (41) 3-1/2" (89) 4-1/8" (105) 3-5/8" (92) 3-1/2" (89) 5-1/8" (130) 4-7/8" (124) 4-3/8" (111) 13" (330) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-3/4" (95) 3-1/8" (79) 3" (76) 3500ST Maximum Door Width (Wood or ) Inches (cm) Model Number Sized s Multi-Sized s Non-Hold Open Hold Open Non-Hold Open Hold Open Interior Exterior 85-110 85-180 85-110 32" (81) N/A 38" (97) 32" (81) 48" (122) 38" (97) 3304ST, 3504ST 3305ST, 3505ST 3306ST, 3506ST 3304ST-180, 3504ST-180 3305ST-180, 3505ST-180 3306ST-180, 3506ST-180 3314ST, 3514ST 3315ST, 3515ST 3316ST, 3516ST 3301ST 3501ST 3311ST 3511ST Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 20

technical details push side slide track CL Hinge 5" (127mm) 23" (584mm) 5/8" (16mm) Ref 1-1/2" (38mm) 1-1/2" (38mm) H E B Full C K 2-1/8"* (54mm) Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Series E Minimum Top Rail B Minimum Top Rail Clearance C Template Position K Length H Height W/O With 3146, 3158, 3548 & 3548A Slim or Full Slim or Full Slim or Full Slim or Full P3300ST 5" (127) 2-3/4" (70) 6" (152) 6-5/8" (168) 6-1/8" (156) 6" (152) 7/8" (22) 5/8" (16) 1/8" (3) 13" (330) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-3/4" (95) 3-1/8" (79) 3" (76) P3500ST Maximum Door Width (Wood or ) Inches (cm) Model Number Sized s Multi-Sized s Non-Hold Open Hold Open Non-Hold Open Hold Open Interior Exterior 85-100 32" (81) N/A P3304ST, P3504ST P3314ST, P3514ST 38" (97) 32" (81) P3305ST, P3505ST P3315ST, P3515ST 48" (122) 38" (97) P3306ST, P3506ST P3316ST, P3516ST P3301ST P3501ST P3311ST P3511ST Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 21

technical details pull side low profile track 1-11/16" (43mm) 25" (635mm) 1" (25mm) B 21/32" (17mm) H 1-1/8" 29mm) A C K 2-1/8"* (54mm) Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Series B Minimum Top Rail W/O With 3146 Slim or Full A Minimum Top Rail Clearance Slim or Full C Template Position Slim or Full K Length Slim or Full H Height 3300ST 2-1/2" (64) 5/8" (16) 3" (76) 4-5/8" (117) 3-1/8" (79) 3" (76) 5-5/8" (143) 5-3/8" (137) 4-7/8" (124) 13" (330) 13-5/8" (346) 14" (356) 3" (76) 3-7/8" (98) 3-1/4" (83) 3-1/8" (79) 3500ST Maximum Door Width Inches (cm) Sized s Model Number Multi-Sized s Interior Non-Hold Open Hold Open Non-Hold Open Hold Open 32" (81) 3344ST 3544ST 3344STH 3544STH 38" (97) 3345ST 3545ST 3345STH 3545STH 3341ST 3541ST 3341STH 3541STH 48" (122) 3346ST 3546ST 3346STH 3546STH Note: 3301/3501 door closers can be adjusted for door sizes noted. Multi-size closers are set at mid power range from the factory. *Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 22

technical details push side low profile track Mounting holes for closer body are spaced 3/4" (19mm) vertically x12" (305mm) horizontally. B Minimum Top Rail A Minimum Top Rail Clearance C Template Position K Length H Height Series W/O With 3146, 3158, 3548, 3548A Slim or Full Slim or Full Slim or Full Slim or Full P3300ST P3500ST 4" (102) 1-3/4" (44) 5" (127) 5-5/8" (143) 5-1/8" (130) 5" (127) 1-1/8" (29) 7-8" (22) 3/8" (10) 13" (330) 13-5/8" (346) 14" (356) 3" (76) 3-7/8" (98) 3-1/4" (83) 3-1/8" (79) Maximum Door Width Inches (cm) Sized s Model Number Multi-Sized s Interior Non-Hold Open Hold Open Non-Hold Open Hold Open 32" (81) P3344ST P3544ST P3344STH P3544STH 38" (97) P3345ST P3545ST P3345STH P3545STH P3341ST P3541ST P3341STH P3541STH 48" (122) P3346ST P3546ST P3346STH P3546STH Note: 3301/3501 door closers can be adjusted for door sizes noted. Multi-size closers are set at mid power range from the factory. *Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 23

accessories regular arm Mounting s Slim Line Installations 13" (330) 2-1/4" (57) 13" (330) 2-1/4" (57) Narrow Top Rail - #3146 : For use where the narrow top rail of the door prevents the closer from being mounted directly on to the door surface. This drop plate must be used for any Series 3000 closer mounted on a top rail between 1-9/16" and 2-7/16" (40 and 62mm) in height, or any 3000 low profile closer mounted on a top rail between 1-7/16" and 2-5/16" (36 and 59mm) in height. Concealed Door Holder - #3146 : For use where a concealed door holder prevents normal mounting of the closer to the door. This is the same plate used for narrow rail mounting, but is inverted for this application to permit the mounting screws to clear the bottom of the door-holder preparation in the top rail of the door. This places the centerline of the plate's upper mounting screws at 2-3/16" (56mm) from the top of the door. Full Installations 13" (330) 13" (330) 2-7/8" (73) Exposed Back - #3445 Molded Full Decorative Back : For use on doors with glass lights where a closer with a molded full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 2-7/8" (73) Exposed Back/Narrow Top Rail - Exposed Back Concealed Door Holder - #3446 Molded Full Kit: For use with molded full cover installation when a 3146 is needed as a drop plate on a narrow top rail, or as a clearance plate for a concealed door holder, and the closer back is exposed. Kit contains a 3146 and a 3445 Decorative. Installations 13-5/8" (346) 3-7/8" (98) 13-5/8" (346) 3-7/8" (98) Exposed Back - #3545 Decorative Back : For use on doors with glass lights where a closer with a metal full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 13-5/8" (346) 4" (102) Note: All measurements are Inches/mm. Concealed Door Holder - #3546 : For use where a concealed door holder prevents the normal mounting of the closer to the door. This plate permits the mounting screws to clear the bottom of the door-holder preparation in the top rail of the door. This places the centerline of the plate's upper mounting screws at 2-3/16" (56mm) from the top of the door. Exposed Back/Narrow Top Rail - #3549 Kit: For use with metal full cover installations, when a 3146 is needed as a drop plate on a narrow top rail and the closer back is exposed. Kit contains a 3146 and a 3545 Decorative. 24

accessories regular arm closer mounting plates architectural plastic or metal cover installations 14" (356) 3-1/4" (83) Exposed Back - #3545A Architectural or Architectural Decorative Back : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 14" (356) 3-1/4" (83) Concealed Door Holder - #3546A Architectural or Architectural : For use where a concealed door holder prevents the normal mounting of the closer to the door. This plate permits the mounting screws to clear the bottom of door-holder preparation in the top rail of the door. This places the centerline of the plate's upper mounting screws at 2-3/16" (56mm) from the top of the door. 14" (356) 3-1/4" (83) Exposed Back/Narrow Top Rail - #3549A Architectural or Architectural Kit: For use with architectural plastic or metal cover installations when a 3146 plate is needed as a drop plate on a narrow top rail and the closer back is exposed. Kit contains a 3146 and a 3545A Decorative. 13" (330) 2-1/4" (57) 25

accessories regular arm brackets for non-hold open arms Molded / Bull Nose Trim - #291 Bracket: For use where the door frame has molded or bull nose trim which will not accept a standard non-hold open shoe. The bracket is mortised into the frame rabbet, and projects beyond the face of the frame. It will accommodate a frame rabbet up to 2" (51mm) deep. 1-1/2" (38) 3" (76) Molded / Bull Nose Trim - #291A Bracket: This bracket is similar to, but longer than, the 291 bracket. It is designed to accommodate frame rabbets from 2" to 2-7/8" (51mm to 73mm) deep. 1-1/2" (38) 3-3/4" (95) brackets for hold open arms 3-5/16" (84) 2-1/16" (52) Molded / Bull Nose Trim - #292 Bracket: For use where the door frame has molded or bull nose trim which will not accept a standard hold open shoe. It is mortised into the frame rabbet, and projects beyond the face of the frame. It will accommodate a rabbet up to 2" (51mm) deep. This bracket is used in combination with the standard hold open mounting shoe. 1-7/16" (37) 2-1/2" (64) Note: All measurements are Inches/mm. 26

accessories top jamb arm closer mounting plates slim line installations 13" (330) Low Ceiling Clearance - #3146 : For use where low ceiling clearance prevents normal top jamb mounting. This plate is used when clearance is from 1-7/8" to 2-7/8" (48mm to 73mm). Where ceiling clearance is less than 1-7/8" (48mm) see #3148 below. 2-1/4" (57) Overhead Door Holder - #3146 : For use where a surface or concealed overhead door holder prevents normal top jamb mounting. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 2-7/8" (73mm) from the top of the door. 13" (330) Low Ceiling Clearance - #3148 : For use where the ceiling clearance is between 1-1/2" and 1-3/4" (38mm and 44mm). 3-5/8" (92) 13-15/16" (354) 3-7/8" (98) metal cover installations Low Ceiling Clearance - Overhead Door Holder - #3547 Full : For use where a low ceiling clearance prevents normal top jamb mounting. This plate is used when the clearance is between 1-5/8" and 3-7/8" (41mm and 98mm). Or for use where a surface or concealed overhead door holder prevents normal top jamb mounting of a closer with a metal full cover. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 3-7/8" (98mm) from the top of the door. architectural plastic or metal cover installations 14" (356) 3-7/8" (98) Low Ceiling Clearance - Overhead Door Holder - #3547A Architectural or Architectural : For use where low ceiling clearance prevents normal top jamb mounting. This plate is used when the clearance is between 1-5/8" and 3-7/8" (41mm and 98mm). Also for use where a surface or concealed overhead door holder prevents normal top jamb mounting of a closer with an architectural plastic or metal full cover. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 3-7/8" (98mm) from the top of the door. Note: All measurements are Inches/mm. 27

accessories parallel arm closer mounting plates slim line installations 13" (330) 3-5/8" (92) Narrow Top Rail - #3148 (3300 Series): For use where a narrow top rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/8" (73mm) in height. 13" (330) 2-7/8" (73) full cover installations Exposed Back - #3445 Molded Full Decorative Back : For use on doors with glass lights where a closer with molded full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 13" (330) 4-1/2" (114) Exposed Back/Narrow Top Rail - #3158 Molded Full : For use on doors with glass lights where a closer with molded full cover is installed and the back of the closer is exposed. This covers the back of the installation and gives a pleasing appearance from the reverse side. 13-5/8" (346) 13-5/8" (346) 3-7/8" (98) 5-1/8" (130) metal cover installations Exposed Back - #3545 Full Decorative Back : For use on doors with glass lights where a closer with full metal cover is installed and the back of the closer is exposed. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. Exposed Back/Narrow Top Rail - #3548 Full : For use on doors with glass lights where a closer with metal full cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/8" (73mm) in height. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. architectural plastic or metal cover installations 14" (356) 14" (356) 3-1/4" (83) 4-5/8" (117) Exposed Back - #3545A Architectural or Architectural Decorative Back : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. Exposed Back/Narrow Top Rail - #3548A Architectural or Architectural : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/8" (73mm) in height. This plate covers the back of the installation to give a pleasing appearance from the reverse side. Note: All measurements are Inches/mm. 28

accessories parallel arm - brackets for non-hold open arms 4-7/8 (124) 1-1/2 (38) Standard Installation - #289A Soffit : This soffit plate is supplied standard with parallel arm closers. It can be mounted where the frame soffit is as narrow as 1" (25 mm). 3-1/2 (89) 2-3/16 (56) 2 (51) Mounting between Doors - #413A Soffit Bracket: For use where insufficient space between companion doors does not permit use of other soffit plates. This bracket permits mounting of the closer between doors with as little as 3" (76mm) of header space. Permits closer arm to clear up to 5/8" (16mm) high stop. 3-5/8 (92) 3 (76) Narrow Frame/Removable Stop - #297 Soffit : For use where a narrow frame or frame with removable stop does not permit use of the standard soffit plate. This soffit plate may be mounted on the frame soffit or the frame rabbet where the stop does not exceed 5/8" (16mm) in height. All of the screw holes are in a straight line, requiring as little as 1-1/4" (32mm) of frame reveal to mount bracket and maintain good closer arm geometry. Where the frame soffit is as wide as 2" (51mm), this soffit plate may be used to clear weatherstripping that is up to 1-3/8" (35mm) wide and 5/8" (16mm) in height. 3-1/2 (89) 4 (102) Blade/Applied Stop - #299 Soffit : For use where a blade or applied stop does not permit installation of the standard soffit plate. Mounts to either the frame soffit or rabbet. Since this soffit plate projects 7/8" (22mm) less than a standard soffit plate, it requires a minimum frame reveal of 1-1/2" (38mm). Permits closer to clear up to a 5/8" (16mm) stop. 3-1/2 (89) 2-1/2 (64) Flush Transom - #589L Angle Bracket: For use where rabbeted or flush transom conditions prevent installation of a soffit plate. Used in combination with the 289 soffit plate, or may be used in combination with the 290 soffit plate when it is necessary for the closer arm to clear a separate overhead door holder. 1-1/2 (38) 3-1/2 (89) 3-1/2 (89) 1-15/16 (49) Extra-Clearance - #290 Offset Soffit : For use where the need for additional clearance prevents use of the standard soffit plate. This plate mounts to the frame soffit to provide up to 2" (51mm) of clearance when a separate overhead door holder is used. Standard mounting requires a 2-5/8" (67mm) wide frame soffit. It may also be used where unusually high frame stops or weather-stripping prevent the use of other soffit plates. Note: All measurements are Inches/mm. 29

accessories parallel arm - brackets for non-hold open and hold open arms 3-1/2 (89) Parallel Hold Open - #588 Adapter : Supplied standard with all parallel arm hold open closers. It can also be used to convert regular arm or top jamb hold open arms to parallel arm installation. It can be mounted where the frame soffit is as narrow as 1" (25mm). 4-9/16 (116) 2-9/16 (65) 3-1/2 (89) 2-1/2 (64) Flush Transom - #589L Angle Bracket: For use where rabbeted or flush transom conditions prevent installation of a soffit plate. Used in combination with the 588 adapter plate, this bracket fastens to the overhead transom to provide a mounting surface for the soffit plate assembly. 1-1/2 (38) 1/2 (30) 3-3/8 (86) 1 (25) Clearance/Support Blade Stop - #891 Spacer Block: For use where the door frame has a blade stop and the soffit plate must be mounted on the frame rabbet. This accessory is used in combination with the standard spacer block to provide clearance of the blade stop. Also used with non-hold open arms. Note: All measurements are Inches/mm. 30

accessories parallel rigid, holder/stop, holder/stop spring arms Mounting s Slim Line installations 13" (330) 3-5/8" (92) Narrow Top Rail - #3148 : For use where a narrow top rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mount a closer on a top rail as narrow as 2-9/16" (65mm) in height. 13" (330) 2-7/8" (73) Full Installations Exposed Back - #3445 Molded Full Decorative Back : For use on doors with glass lights where a closer with molded full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 13" (330) 4-1/2" (114) Exposed Back/Narrow Top Rail - #3158 Molded Full : For use on doors with glass lights where a closer with molded full cover is installed and the back of the closer is exposed. This covers the back of the installation and gives a pleasing appearance from the reverse side. 13-5/8" (346) 3-7/8" (98) Installations Exposed Back - #3545 Full Decorative Back : For use on doors with glass lights where a closer with full metal cover is installed and the back of the closer is exposed. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. 13-5/8" (346) 5-1/8" (130) Exposed Back/Narrow Top Rail - #3548 Full : For use on doors with glass lights where a closer with metal full cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-9/16" (65mm) in height. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. Architectural or Installations 14" (356) 3-1/4" (83) Exposed Back - #3545A Architectural or Architectural Decorative Back : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 14" (356) 4-5/8" (117) Exposed Back/Narrow Top Rail - #3548A Architectural or Architectural or Architectural : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-9/16" (65mm) in height. This plate covers the back of the installation to give a pleasing appearance from the reverse side. Note: All measurements are Inches/mm. 31

accessories parallel rigid, holder/stop, holder/stop spring arms Brackets for Non-Hold Open Arms & Hold Open Arms 5/8 (16) 1/2 (13) 7/8 (22) Standard - #293S Spacer Block: For use where a narrow frame soffit does not provide adequate support for the soffit plate. Supplied as standard with all parallel rigid arm closers. 3-1/2 (89) 2-1/2 (64) Flush Rabbeted Transom - #293L Angle Bracket: For use where flush transom conditions prevent mounting of the standard soffit plate. This bracket is used in combination with the standard soffit plate. 3 (76) 1-1/2 (38) 1-1/2 (38) 2 (51) Narrow Frame - #890 Support Bracket: For use where the frame is narrow and the soffit plate cannot be mounted directly to the frame soffit or rabbet. Used in combination with the #891 Spacer Block on blade stop frames to provide extra support and needed clearance of the blade stop. Used on frame where the frame doesn't exceed 5/8" (16mm) in height. 3-3/8 (86) 1 (25) Clearance/Support Blade Stop - #891 Spacer Block: For use where the door frame has a blade stop and the soffit plate must be mounted on the frame rabbet. This accessory is used in combination with the standard spacer block to provide clearance of the blade stop. Also used with non-hold open arms. 1/2 (30) Note: All measurements are Inches/mm. 32

accessories uni stop arm Mounting s Parallel Arm 13" (330) 3-5/8" (92) Narrow Top Rail - #3148 : For use where a narrow top rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/16" (62mm) in height. 13" (330) 2-7/8" (73) Full Installations Exposed Back - #3445 Molded Full Decorative Back : For use on doors with glass lights where a closer with molded full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 13" (330) 4-1/2" (114) Exposed Back/Narrow Top Rail - #3158 Molded Full : For use on doors with glass lights where a closer with molded full cover is installed and the back of the closer is exposed. This covers the back of the installation and gives a pleasing appearance from the reverse side. 13-5/8" (346) 3-7/8" (98) Installations Exposed Back - #3545 Full Decorative Back : For use on doors with glass lights where a closer with full metal cover is installed and the back of the closer is exposed. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. 13-5/8" (346) 5-1/8" (130) Exposed Back/Narrow Top Rail - #3548 Full : For use on doors with glass lights where a closer with metal full cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-9/16" (65mm) in height. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. Architectural or Installations 14" (356) 3-1/4" (83) Exposed Back - #3545A Architectural or Architectural Decorative Back : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 14" (356) 4-5/8" (117) Exposed Back/Narrow Top Rail - #3548A Architectural or Architectural or Architectural : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/16" (62mm) in height. This plate covers the back of the installation to give a pleasing appearance from the reverse side. Note: All measurements are Inches/mm. 33

accessories uni stop arm Mounting Soffit Reinforcing Brackets (for Parallel Arm) 2-1/4" (57) 5/16" (8) Additional Support - #6190 Reinforcing Bracket: Standard for use with all parallel arm UNI Stop door controls. Provides additional support to the soffit plate on installations with door frame reveals from 1-7/8" to 4-5/8" (48mm to 117mm). 2-1/4" (57) 1-1/2" (38) 3-1/2" (89) 2-1/2" (64) Flush Rabbeted Transom - #589L Angle Bracket: Optional for use with all parallel arm UNI Stop door controls. For use where rabbeted or flush transom conditions prevent installation of the soffit plate assembly. This bracket fastens to the overhead transom to provide a mounting surface for the soffit plate assembly. 2-1/4" (57) 5/8" (16) Wide Frame - #6191 Reinforcing Kit: Optional for use with all parallel arm UNI Stop door controls. Used to support the soffit plate on installations with wide frames. Clamps may be used with or without the spacer block, depending on frame conditions. Spacer Block Clamp 5/8" (16) 5/8" (16) Minimum 4-1/8" (105) 2-3/4" (70) Clamp Note: All measurements are Inches/mm. 34

accessories uni stop arm Mounting S Top Jamb 13" (330) 3-5/8" (92) Narrow Top Rail - #3148 : For use where a narrow top rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/16"(62mm) in height. 13" (330) 2-7/8" (73) Full Installations Exposed Back - #3445 Molded Full Decorative Back : For use on doors with glass lights where a closer with molded full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 13" (330) 4-1/2" (114) Exposed Back/Narrow Top Rail - #3158 Molded Full : For use on doors with glass lights where a closer with molded full cover is installed and the back of the closer is exposed. This covers the back of the installation and gives a pleasing appearance from the reverse side. Installations 13-15/16" (354) 3-7/8" (98) Low Ceiling Clearance - Overhead Door Holder - #3547 Full : For use where a low ceiling clearance prevents normal top jamb mounting. This plate is used when the clearance is between 1-5/8" and 3-3/4" (41mm and 95mm). Or for use where a surface or concealed overhead door holder prevents normal top jamb mounting of a closer with a metal full cover. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 3-7/8" (98mm) from the top of the door. Architectural or Installations 14" (356) 3-7/8" (98) Low Ceiling Clearance - Overhead Door Holder - #3547A Architectural or Architectural : For use where low ceiling clearance prevents normal top jamb mounting. This plate is used when the clearance is between 1-5/8" and 3-3/4" (41mm and 95mm). Or for use where a surface or concealed overhead door holder prevents normal top jamb mounting of a closer with an architectural plastic or metal full cover. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 3-7/8" (98mm) from the top of the door. Note: All measurements are Inches/mm. 35

parts door closer body assemblies covers Model Drawing Slim Line* 3200P 1-3/4" high x 2-1/8" deep x 13" long (44 x 54 x 330) Model Description 310XLAP Sized closer bodies 3100, 3300, 3500 3101LAP Multi-sized closer bodies 3101, 3301, 3501 X= Specify Size LAP = Less All Parts s Series 3300 3301 3500 3501 fasteners Steel Door Application (Side view) Aluminum and Wood Door Application (Aluminum Door Shown) (Side view) Steel Door Application Sex-nut Sex-nut / / Sleeve-nut :: SN "SN" (4 per (4 pack) per pack) or Sex-nut / Sleeve-nut & or Screw: "SNB" (4 per pack) Sex-nut / Sleeve-nut & Screw : SNB (4 per pack) Door SN's SNB's 1-3/4" SN s SN-134SNB s SNB134-38 1 3/8 Door 1 3/4 Door 2 1/4 Door S.S. SNB s 13/4 Door (stainless steel) 2" SN-134 N/A SNB134-38 SNB200-38 2-1/4" SN-214 SNB214-38 S.S. SNB's 1-3/4" SN-134SS SNB134SS-38 Thru Bolt & Grommet Nut : TBGN (4 per pack) 1 3/8 Door 1 3/4 Door 2 1/4 Door Type of Material SN-138 SN-214 SN-134SS TBGN s TBGN138-38 TBGN134-38 TBGN214-38 SNB138-38 SNB214-38 SNB134SS-38 BFK4/03 3200P* N/A N/A N/A 3400P 3400M 3400A 3400MA Aluminum and Wooden Door Application (Aluminum Door Shown) Through-bolt & Grommet Nut : "TBGN" (4 per pack) Door Note: All measurements are Inches/mm. TBGN's 1-3/8" TBGN138-38 1-3/4" TBGN134-38 2-1/4" TBGN214-38 Full 3400P 2-7/8" high x 2-1/8" deep x 13" long (73 x 54 x 330) Full 3400M 3-7/8" high x 2-3/16" deep x 13-5/8" long (98 x 56 x 346) Architectural 3400A 3-3/32" high x 2-1/4" deep x 13-7/8" long (79 x 57 x 352) Architectural 3400MA 3" high x 2-3/16" deep x 13-15/16" long (76 x 56 x 354 ) Arm Type Reg., Par. & Top Jamb Parallel Rigid, Holder/Stop Regular Rigid Heavy-Duty Arm Uni Stop Arm *Pinion cap not included with Slim Line cover. Part #1639 Torx Screw Packs TX38 PRTX38 RTX38 UNITX38 36