Addendum No. 1 Information for Bid (IFB) V1488 Heavy- Duty Low Floor Cutaway Paratransit Bus

Similar documents
Questions and Answers

ADDENDUM NO.1 IFB NO.V-1821 CUTAWAY BUS. July 3, 2018

VEHICLE SPECIFICATIONS Mid-Sized 4 X 4 Sport Utility Vehicle REV 05/16

VEHICLE SPECIFICATIONS 12 PASSENGER OFF CENTER AISLE VAN REV 02/19

REQUEST FOR TRANSIT VEHICLE PRICE QUOTE (RFQ)

Brazos Transit District. RFP#: Date: 10/31/2018. Creative Bus Sales Requests for Pre-Offer Change or Approved Equal: Page 1

ADDENDUM NO. 1 Kansas City Area Transportation Authority 1350 E. 17 th Street Kansas City, Missouri 64108

Paratransit Van PCID NO COMMONWEALTH OF PENNSYLVANIA PENNSYLVANIA COMMERCIAL ITEM DESCRIPTION (PCID)

Paratransit Side Entry Mini Van PCID NO COMMONWEALTH OF PENNSYLVANIA PENNSYLVANIA COMMERCIAL ITEM DESCRIPTION (PCID)

Barrow County Board of Education 179 W. Athens Street Winder, Georgia 30680

PART A TENDER SUBMISSION

City of Jeffersontown PROJECT SCOPE & DESCRIPTION

FLORIDA SHERIFFS ASSOCIATION, FLORIDA FIRE CHIEFS ASSOCIATION, & FLORIDA ASSOCIATION OF COUNTIES

Section 11: Vehicle Inspection, Repair and Maintenance

PART 665 BUS TESTING. Subpart A General. 49 CFR Ch. VI ( Edition)

City of Storm Lake Fire Department Heavy Rescue Specifications

CITY OF ALHAMBRA NOTICE INVITING BIDS NO. N2M16-144

REQUEST FOR QUOTES Invitation to Bid

FLORIDA SHERIFFS ASSOCIATION, FLORIDA FIRE CHIEFS ASSOCIATION, & FLORIDA ASSOCIATION OF COUNTIES

REQUEST FOR BID For Trucks. Bid Notice

Incomplete Vehicle Document 2014 Model Year NOTE:

CREATIVE BUS SALES, INC. REPRESENTING MOBILITY VENTURES, LLC

ADDENDUM NO. ONE (1) ACQUIRE SNOW REMOVAL EQUIPMENT NORFOLK INTERNATIONAL AIRPORT, VIRGINIA. May 18, 2016

City of Portsmouth Portsmouth, New Hampshire Department of Public Works. Bid# Five (5) 2018 Ford Trucks INVITATION TO BID

GALLATIN PUBLIC UTILITIES

PACER II. Parking Shuttle. Assisted Living. Shown with optional graphics, lighting and ADA packages. Church

REQUEST FOR QUOTATION

The following documentation is an electronicallysubmitted vendor response to an advertised solicitation from the West Virginia Purchasing Bulletin

One (1) New Ford F-150 Regular Cab XL Bid No Notice to Bidders

VEHICLE SPECIFICATIONS CONVERTED WINDOW VAN with WHEELCHAIR LIFT REV 02/19

BID FOR A ONE (1) ONE-TON AND A HALF (5500 SERIES) CREWCAB TRUCK WITH DUMP BED. BID OPENING February 15, 2017 AT 10:00 A.M.

1. Additional Information. Yes Yes Yes. Yes Yes Yes. Yes Yes Yes

SPECIFICATIONS MEDIUM DUTY TRANSIT BUS WITH ADA ACCESSIBILITY OPTIONS

STATE OF MINNESOTA EQUIPMENT SPECIFICATION. SPECIFICATION: September 2012 Page 1 SINGLE AXLE CAB & CHASSIS

2010 International Application Guide Volume 9 Issue ENTERVAN

COLLEGE COMMUNITY SCHOOL DISTRICT BID SHEET. THREE (3) 78 PASSENGER TRANSIT STYLE SCHOOL BUSES and ONE (1) 65 PASSENGER LIFT BUS

METRO,...,. AMENDMENT- INVITATION FOR BID (IFB) Project No. Date Amendment Issued. Issued By

BID FOR ONE (1) 1 TON CREW CAB TRUCK WITH SERVICE BODY OPENING APRIL 11, 2019 AT 10:00 A.M.

REQUEST FOR BID For Trucks. Bid Notice

REQUEST FOR QUOTES Invitation to Bid. Purchase of Two (2) Class 8A Tandem Axle Tractors

CITY OF BARTLETT 6400 STAGE ROAD BARTLETT, TENNESSEE 38134

TENDER FOR SUPPLY AND DELIVERY OF ONE (1) NEW 2019 or LATER MODEL MINI CARGO VAN (GVW MINIMUM 4700, MAXIMUM 5500)

Department of Finance Purchasing Department INVITATION TO BID

SPECIFICATIONS AND BID FORM FOR ONE NEW SIX WHEEL DRIVE ARTICULATED MOTOR GRADER WITH SNOW GATE. Street Department

ALLEGAN COUNTY ROAD COMMISSION PROPOSAL FOR WESTERN STAR TANDEM REAR AXLE DUMP TRUCKS (CAB & CHASSIS) MINIMUM 64000# GVWR

One (1) New Ford E-450 Commercial Cutaway Van with Knapheide KUV High Roof Body Bid No Notice to Bidders

INVITATION FOR BID BID NO FOR: 2014/15 LIGHT DUTY TRUCKS AND VANS COMMODITY CODE:

FLAT BED STAKE BODY TRUCK

INVITATION TO BID PURCHASING DEPARTMENT P. O. BOX E. CENTRAL AVENUE THIRD FLOOR VALDOSTA, GEORGIA 31601

AFFIX FEDERAL OR CANADA INCOMPLETE VEHICLE CERTIFICATION LABEL HERE

Town of Digby. Tender Equipment Purchase 4 WD One Ton Truck CONTENTS

Community Unit School District # Church St Loami, IL

TENDER HALF TON PICKUP TRUCK, 4x4

Community Unit School District # N Cedar St New Berlin, IL

USPS: Preventative Maintenance (PMI) Directive Last Revision: December 1, 2016

Everything You Need! Phone , Ext. 229

Municipality of the District of West Hants Request for Proposal (RFP) PW Supply of one (1) new ½ Ton 4x4 Truck

INCOMPLETE VEHICLE DOCUMENT NOTE: YOU CAN PRODUCE YOUR OWN LEGITIMATE INCOMPLETE VEHICLE DOCUMENT

July 15, 2016 NOTICE INVITING BIDS NOTICE TO SUPPLIERS FOR FURNISHING MOTOR VEHICLES

Creative Bus Dba Getaway Bus REPRESENTING New England Wheels

SCHEDULE E: TRAINING AIDS

TENDER. 2017/2018 HALF TON PICKUP TRUCK, EXTENDED CAB, 4x4

SAFE. EFFICIENT. BUILT TO LAST. THE BEST LOOKING SCHOOL BUS ON THE ROAD.

ADDENDUM No. 1. BID No /15 Chevrolet Silverado Work Trucks

Town of Marystown. Tender For. One New 4x4 Two (2) Door Cab Chassis (19,500 KG GVWR) With 12Ft Flat Deck

Phenix City Schools BID NO. GF Purchase of Three New Vehicles. Bid Opening Date & Time: January 7, 2019 at 9:00 AM EST

PURCHASING MEMORANDUM

ACTION: ESTABLISH LIFE-OF-PROJECT BUDGET FOR UP TO 100 NEW COMPO BUSES

Request for New Heavy Duty 3/4 ton Pickup Truck for Lee County Emergency Management

REQUEST FOR QUOTE. Half Ton Trucks CONTRACT NO ADDENDUM NO.2

ALLEGANY COUNTY COMMISSIONERS ALLEGANY COUNTY DEPARTMENT OF PUBLIC WORKS. June 2018 BIDDING SPECIFICATIONS FOR NEW ONE-HALF TON PICKUP TRUCKS

Table of New Minor and Major Mechanical Defects To Identify During the Mechanical Inspection of a Road Vehicle

ATTACHMENT A ITEM# 5

NOTICE INVITING BIDS 2018 DEPARTMENT OF PUBLIC WORKS VEHICLE CITY OF BEAVER DAM, WISCONSIN

EL PASO INDEPENDENT SCHOOL DISTRICT PROCUREMENT SERVICES

FLORIDA SHERIFFS ASSOCIATION, FLORIDA FIRE CHIEFS ASSOCIATION, & FLORIDA ASSOCIATION OF COUNTIES

INVITATION TO BID 14 PASSENGER MULTI-FUNCTION BUS ITB

NOTICE OF INVITATION FOR COMPETITIVE SEALED BIDS FOR MOTOR GRADERS (Guadalupe County IFB No )

City of Glasgow Department of Public Works Purchase of (1) 2013 White Rear Load Garbage Truck

INSTRUCTIONS TO BIDDERS AND SPECIFICATIONS FOR A 7-8 CUBIC YARD DUMP TRUCK

COORDINATED GRANT COMPETITION: PROJECT SPONSOR FOLLOW-UP QUESTIONS

Dubuque Community School District SPECIFICATIONS BID FORM AND TIME AND PLACE OF FILING

BANNOCK COUNTY SOLID WASTE

FLORIDA SHERIFFS ASSOCIATION, FLORIDA FIRE CHIEFS ASSOCIATION, & FLORIDA ASSOCIATION OF COUNTIES

Invitation to Bid NEW FOUR WHEEL DRIVE EXTENDED CAB PICKUP TRUCK

COMPRESSED NATURAL GAS (CNG) BUS ENGINES

SAFE. EFFICIENT. BUILT TO LAST. THE BEST LOOKING SCHOOL BUS ON THE ROAD.

ADDENDUM NO. 3. Kansas City Area Transportation Authority (KCATA) 1350 E. 17 th Street Kansas City, Missouri 64108

RFP Agricultural Tractors (AG tractor) SCOPE OF THE PROPOSAL

City Business Registration Number Signature Title

ONE (1) CURRENT MODEL YEAR REGENERATIVE AIR TYPE STREET SWEEPER MOUNTED ON CONVENTIONAL CAB BID NO

This list applies to buses (other than motor coaches), minibuses and any trailer towed by a bus, minibus or motor coach.

ADDENDUM NO. 1 INVITATION FOR BID FOR BUS ENGINE SUPPLY. IFB NO: 2018-FP-08 Date Issued: August 6, 2018

CITY OF KYLE, TEXAS INVITATION FOR BID (IFB) NO: PM

MONTVILLE PUBLIC SCHOOLS MONTVILLE CONNECTICUT FEBRUARY 20, 2015 BID # BUS

SYSTEM SAFETY, SECURITY AND OPERATIONS COMMITTEE JULY 17, 2014 PURCHASE OF HYBRID SEDANS APPROVE CONTRACT AWARD ACTION: RECOMMENDATION

CITY OF CORALVILLE th Street, Coralville, IA

2017 MT-55 Chassis Specifications

INVITATION TO BID PURCHASING DEPARTMENT P. O. BOX E. CENTRAL AVENUE THIRD FLOOR VALDOSTA, GEORGIA 31601

Flexible Anytime, Transformable Forever

Transcription:

Addendum No. 1 Information for Bid (IFB) V1488 Heavy- Duty Low Floor Cutaway Paratransit Bus 7/02/2015 Prospective Bidder: Reference is made to the subject solicitation wherein the following changes are hereby incorporated: Insert: Response to all questions shall be incorporated into IFB V1488 per this Addendum No. 1. (attached) Delete: Bid Price Schedule: Located in Section 7, Substitute: Updated Price Schedule: (Line item 6 has been removed) - No Laptop is required In your bid submission to Transdev Services, Inc., an authorized representative of your firm or organization must acknowledge receipt of Addendum No. 1 in Schedule IV of Section 8 of the IFB. If you have any questions regarding this Addendum No 1, please contact the writer at 516-542- 0100 ext. 4329 or John.french@transdev.com. John French Manager of Procurement Transdev Services, Inc. d/b/a NICE Bus 700 Commercial Avenue Garden City, NY 11530 516 542-0100 ext 4329 John.french@transdev.com

TRANSDEV SERVICES, INC. FEDERAL TRANSIT ADMINISTRATION (FTA) PROCUREMENT Heavy-Duty Low Floor Cutaway Paratransit Vehicle V1488 Transdev Services, Inc. (Transdev) hereby solicits from you a quotation of the price or prices upon which you offer to furnish the following materials, equipment, supplies or services. The contractor/supplier must fill in all information required in the blank spaces. An award shall be made to the responsive and responsible offeror submitting the lowest price, meeting all the IFB requirements. Pricing must remain firm fixed throughout the purchase order/contract term. Offerors must include all costs for labor, material, supervision, shipping, travel time etc., in their offer price. No additional charges will be paid during term of the contract/purchase order. Do not include taxes in the offer price. Transdev Services, Inc. is not TAX Exempt for this procurement of buses, include taxes only on the invoices. UPDATED PRICE SCHEDULE Vendor Name: Initials: Item # Description Quantity 1 Furnish and Deliver five (5) Heavy Duty Low Floor meeting or exceeding the Specifications listed in this IFB V1488, no later than the Delivery Schedule Requirements in Section 2. 5 * Price of One Item $ $ Total Price 2 Engine- Extended Warranty (3 year period) 5 * $ $ 3 Transmission- Extended Warranty (3 year period) 5 * $ $ 4 5 HVAC- Extended Warranty (3 year period) 5 * Brakes- Extended Warranty (3 year period) 5 * $ $ $ $ Total Dollar Value of All Line Items $ (Prices indicated in numbers take precedent over prices indicated by words) NOTE: * Transdev reserves the right to reduce quantities ordered if appropriate funds are not available, or increase quantities ordered. All buses ordered will reflect unit pricing associated with the model year of the item being purchased. Transdev may exercise the option to procure any, all or none of the optional buses. Term: The contract period is six (6) months from date of award; early delivery is preferred for line item 1. Total price in words Contractor/Supplier Information:

Offeror s Signature: Date: Print Name: Company Name: Company Address: City, State, Zip Code: Federal ID#: Phone #: Fax #: E-Mail: Please indicate by signature your Company s acceptance of Federal Transit Administration (FTA) Provisions, New York State Provisions and General Provisions. Name: Signature: Failure to sign above shall cause offer to be disqualified Altoona Test Information ( ) This vehicle has passed the Altoona Test Certification; Report Number: ( ) This vehicle has not passed the Altoona Test Certification (Provide Explanation Below) Offeror s Signature: Date:

# Section Spec Ref Question or Request for Equal Response s 1 4.4 Bonds This section references required bonds and a 100% bond, however, The section 5 checklist indicates that bonding is not applicable to this procurement. Please confirm that neither bid nor performance bonds are required. Bonding is not required 2 3 General This section references a 7 year/250,000 mile useful life, but the mileage portion of the 7 year test is 200,000 miles. Please accept that the useful life will be 7 years/200,000 miles. 3 8.e General Dimensions Please accept a wheel base of up to 208" if necessary for better weight distribution 4 16.b Battery Compartment 5 16.d Battery Compartment Please accept a stainless steel tray mounted in a fiberglass housing that is part of the curb side entry wing. This provides the curb side access required in the bid specification. See attached picture. Please accept that the tray will pull out as far as the tray in the sample picture in the bid spec, but does not come out to fully inspect the rear of the batteries. 6 17.a Brakes Please accept the Ford OEM brakes. The life of the brakes will vary depending on drivers and application. 7 17.f Brakes Please accept that these vehicles will have the Ford OEM park brake that is not an air park brake. Air brakes are not available from Ford as an option on the Ford E series chassis. 8 18.a Chassis-Exterior Body Please accept that the body structure will not be "Gatorshield" which is a galvanized type steel. See attached information. 9 22 Body Please accept that this bus will have rear wheel wells in the bus as required for the low floor design. 10 22 Body Please accept "Gatorshield" as an approved corrosion protection. See above referenced material. 11 25 Driveline Please accept drive shaft guards that are welded to the floor structure. 12 28 Springs Please accept that these vehicles, due to the air suspension, will not have a rubber shear spring on the rear suspension system. 13 29.c Engine Please clarify if you are looking for a gasoline engine or a diesel engine. You are requesting a 14,500# minimum GVWR chassis and the only chassis in that class offers only a gasoline engine and no diesel engine. Max 14,500 GVWR 14 29.f Engine Please accept a gasoline 6.8L V-10 from Ford with 305 HP @ 4250 RPM- 420 LB/FT @ 3250 RPM 15 30.f Cooling System Please accept a derate system from the chassis OEM in lieu of a shutdown system. The body structure must be corrosion protected, fully undercoated steel per spec. 16 32.b Fuel Please accept a fuel tank designed for a gasoline engine. Tank must be designed to accommodate Diesel fuel Please accept the Ford gasoline OEM fuel tank, gauge, and fill neck. CBI will install a lockable fuel fill door 17 33 Fuel System (Diesel) over the OEM fill neck. Vehicle is diesel 18 34.i and j Exhaust System Please note that if going to a gasoline engine that there will not be any DEF fluid lines or filler. Engine is Diesel, not gasoline 19 35.i Interior Panels Please accept and ABS modesty panel in lieu of the melamine panels. 20 35.i Interior Panels If ABS is not acceptable, please accept modesty panels covered in flooring material that will match the interior floor covering. ABS is acceptable (see question above) 21 37 Decals and Placards Please accept that the interior decals will have a painted steel backer. 22 38 Floor Covering In lieu of the ribbed rubber, please accept Tarabus Gerflor as an acceptable alternative. This is warranted for 12 years and has proven to be a good seamless floor covering. See attached information. 23 38.i Floor Covering Please note that this low floor design will have 2 flat surfaces with a ramp just in front of the wheel well to allow access to the rear flat surface. There will be wheel wells in the rear of the bus. See attached picture of a sample bus. 24 38.l Floor Covering Please note that these vehicles will only have 1 step into the vehicle. 25 38.r Floor Covering Please accept that this bus will have rear wheel wells in the bus as required for the low floor design. Please accept that all heater hoses added to the chassis will be the silicone hose referenced in section 43.g 26 43.e Heater System and not copper or brass. 27 48.c.7 Instrumentation Please accept that the Ford chassis does not offer a tire pressure monitoring system from the factory. 28 50 Doors Please accept an electric door with no air operation for the passenger entry doors. 29 59.a Emergency Reflectors Please accept a quantity of 3 reflectors as that is the amount in our standard reflector kit. 30 61 Proximity Sensor Please clarify what you are looking for in the proximity switches mentioned in the section. Front and rear accident avoidance. Rear only is acceptable. 31 62.b Brake Light Please clarify how you want these lights to operate with the transmission. When the transmission is in park the brake lights should be enabled. 32 65.d Seating Please clarify whether the agency wants hi back or mid high seats. High back seats are referenced in this section, but in section 65.j this section requires mid high seats. Mid back required

# Section Spec Ref Question or Request for Equal Response s Please clarify if the agency is looking for 3PT seat belts for the passenger seats. This section refers to a Section 65J refers to providing an approved 3-point 33 65.j Seating shoulder belt system, but section 65.h refers to lap belts. retractable seatbelt system. 34 65.n Seating 35 68 Driver Foot Controls 36 73.c Tires 37 73.d Tires Please allow that the fixed passenger seats will be installed in seat track in the floor and wall. This is how our seats are pull tested and this also allows for maximum flexibility for the agency for future operation. Please accept the chassis OEM brake and accelerator pedals as they only come in one configuration and we are not allowed to change how they come in. Please accept that Ford does not offer tire pressure indicators as a factory option so we respectfully request that this section be deleted. Please accept steel rims with S/S wheel covers as aluminum rims are not available from Ford and we are not allowed to install aftermarket aluminum rims on the chassis'. White painted wheel only, SS will not be approved 38 73.f Tires Please clarify what you are looking for with regards to wheel check indicators. Please accept a minimum 1 gallon windshield wiper reservoir as this is what comes standard from the 39 81.c Windshield Wiper/Washer chassis manufacturer. 40 82.b Shock Absorbers Please accept that there will be 2 rear shock absorbers on the bus. 41 109.4 Warranty Please accept our standard body warranty. See attached. 42 109.4 Warranty Please accept the standard Ford chassis warranty. See attached. 43 109.6 Scope of Warranty Please note that any chassis warranty issues need to be completed by an authorized chassis dealer. 44 109.19 Fleet Defects Please exclude the chassis from the fleet defect clause as chassis' manufacturers don t recognize this. 45 126 Delivery Schedule Please allow up to 210 days after receipt of order for delivery. Indicators when properly installed on the vehicle lug nut shall provide the driver a visual inspection of the correct lug nut torque as well as potential issues with either the vehicle brakes or bearings. Wheel check indicator colors identify temperature ranges. 46 DBE DBE Please delete the requirement to complete the Bidders/Offerors Questionnaire in this section. Section 2, item 11, states that there is no DBE goal associated with this program. Further, Transit Vehicle Manufacturers (TVM) submit goals and report progress directly to the FTA Form to be filled out only by the Seller. 3. GENERAL. heavy duty chassis designed for a minimum seven (7) year useful life or 250,000 miles 47 3 General 48 8 General Dimensions 49 8 General Dimensions 50 8 General Dimensions 51 8 General Dimensions 52 12 Interior Standing Height Respectfully request this be changed to meet NICE spec 99. ALTOONA TESTING (page 122) a. Must comply with Altoona 7 Year and 200,000 miles Also, the 7yr/200k should be a medium duty chassis. 8. GENERAL DIMENSIONS a. Body width = Minimum Interior 96 Please approve: Minimum 91 & 3/8". There is only one manufacturer of low floor cutaways that builds on a 102" body, so not allowing a 96" will result in a single bid. 8. GENERAL DIMENSIONS d. Interior height = Minimum 76 Please approve: 72" minimum at the rear of bus / 85" at the front of bus when measured at center aisle (Rear interior height varies with bus length) 8. GENERAL DIMENSIONS e. Wheelbase (Front to Rear) = 190 Inches (Maximum) Please approve: 191" 8. GENERAL DIMENSIONS 10. PASSENGER ENTRANCE DOOR a. Doorway Height Entrance 76 Inches (Minimum) Please approve: Doorway Height Entrance 75 Inches 12. INTERIOR STANDING HEIGHT (CENTER AISLE) a. 78 Inches (Minimum) Please approve: 72" minimum at the rear of bus / 85" at the front of bus when measured at center aisle (Rear interior height varies with bus length)

# Section Spec Ref Question or Request for Equal Response s 13. PAYLOAD CURB WEIGHT a. Total: 14,500 pounds (Minimum) b. Front Axle: 4,600 pounds (Minimum) c. Rear Axle: 9,450 pounds (Minimum) 53 13 Payload ARBOC builds on GM4500 and has the following payload - Please approve: a. Total: 14,200 pounds (Minimum) b. Front Axle: 4,600 pounds (Minimum) c. Rear Axle: 9,600 pounds (Minimum) 54 15 Battery 55 16 Battery Compartment Please approve: (2) Group 24 770CCA with No warranty for batteries, as battery warranties are not available. 16. BATTERY COMPARTMENT b. battery compartment and tray shall be 16 gauge stainless steel Please approve: Fiberglass battery compartment 16. BATTERY COMPARTMENT h. The battery tray shall be large enough to hold two OEM batteries GEL type batteries with 900CCA will be accepted. Batteries must meet the warranty requirements in 109.4 Battery compartment can be fiberglass, tray must be stainless steel. 56 16 Battery Compartment Please approve: Large enough for one battery (only one battery is required for the ARBOC electrical system). NICE requires dual batteries. 17. BRAKES a. Extended life brakes with 50,000 mile warranty shall be provided on all four (4) wheels 57 17 Brakes Standard GM Brake warranty is 3 years / 36,000 miles, less friction material. Extended warranties are not available. Please approve. 18. CHASSIS EXTERIOR BODY a. Corrosion protection, fully undercoated steel structure Please approve: Mil Spec E-Coat corrosion protection with 1500 hour salts spray on all underbody components (not a secondary operation undercoated underbody as specified)- See document titled 18. CHASSIS EXTERIOR BODY CORROSION PROTECTION. 58 18 Chassis-Exterior Body 59 18 Chassis-Exterior Body 60 18 Chassis-Exterior Body 61 18 Chassis-Exterior Body 62 18 Chassis-Exterior Body Arboc also totally encapsulates the single continuous engineered wood floor with polyurea (like a truck bed Rhino liner) - see provided document titled 18. CHASSIS EXTERIOR BODY - FLOOR. By using both Mil Spec E-Coat and polyurea floor, 2000 plus buses in the field have proven this to be a more corrosion resistant underbody, so undercoat is not required. It also keeps underbody components clean from undercoat material. 18. CHASSIS EXTERIOR BODY b. Two section panels are required on the sides of the vehicle. Please approve: continuous single piece fully laminated FRP. This reduces possible leak paths / water intrusion 18. CHASSIS EXTERIOR BODY j. The rear bumper shall be constructed from minimum 10-gauge steel powder coated white. White powder coat is not available. Please approve black painted bumper. 18. CHASSIS EXTERIOR BODY k. All modifications and/or industry standard wheelbase extensions to the OEM frame rail shall only be made aft OEM chassis cab B pillar. Please approve: Arboc patented front entry that utilizes a cut in front of curbside B-Pillar providing more passenger space on curbside, typically 2 additional ambulatory compared to competition. Over 2,000 busses in the field have this forward entry benefit. 18. CHASSIS EXTERIOR BODY l. No modifications shall be made to the OEM drive train mounts, and/or OEM drive train specified component positioning. Please approve: Arboc patented front entry utilizes a slight engine, mount & drive train repositioning where all GM OEM components are fully warranted. Again, over 2,000 Arboc buses in the field utilize this feature.

# Section Spec Ref Question or Request for Equal Response s 20. STRUCTURE The wheel housing shall be constructed of a minimum 14 gauge galvanized steel or stainless steel 63 20 Structure Please approve: 16 gauge. 22. BODY - Flat floor, no wheel wells 64 22 Body We respectfully request the "no wheel Wells" be deleted as this is required for any low floor cutaway. 22. BODY Insulation has a minimum R-value of 9.75 65 22 Body Please approve: R9 22. BODY The body shall be welded to the under frame structure so that the entire frame shall act as one unit without any movement in joining 66 22 Body All Arboc wall, roof and floor structure assemblies are welded. Arboc Bolt and Bond assembly of walls to the floor, and roof to the walls utilizing Loctite H8600 - see provided document. Results of peel tests show that the steel will tear away before the bond. Over 2,000 Arboc buses are in the field. Arboc is the only low floor cutaway to meet FMVSS 214 side impact protection - further evidence that bold and bond is a superior final assembly technique. Please approve bolt and bond. 23. UNDERCOATING Please approve: Non traditional undercoated underbody, as Arboc utilizes a Mil Spec E-Coat corrosion protection with 1500 hour salts spray on all underbody components - See document titled 18. CHASSIS EXTERIOR BODY CORROSION PROTECTION. 67 23 Undercoating 68 29 Engine Arboc also totally encapsulates the single continuous engineered wood floor with polyurea (like a truck bed Rhino liner) - see provided document titled 18. CHASSIS EXTERIOR BODY - FLOOR. By using both Mil Spec E-Coat and polyurea floor, 2000 plus buses in the field have proven this to be a more corrosion resistant underbody, so undercoat is not required. It also keeps underbody components clean from undercoat material. 29. ENGINE f. rated 620 lb. ft. torque at 1,400 rpm Please approve: GM Duramax 6.6L diesel engine with torque rated at 525 Lb/Ft @ 1600 RPM. For GM Duramax diesel specification. However, revision to Technical Spec for Diesel Engine to have minimum 3.2 L diesel, 185 HP @ 3,000 RPM, torque rated at 350 Lb-Ft @ 1,500 RPM minimum. Alternator Minimum 145 AMP. 29. ENGINE j. Engine idle shutdown to help reduce diesel fuel consumption and diesel exhaust emissions. 69 29 Engine Respectfully request this specification be deleted as this is not available on the GM4500 30. COOLING SYSTEM a. through i. 70 30 Cooling System Please approve: Standard OEM cooling package that come on the GM4500 with 6.6L Duramax diesel 32. Fuel a. through h. 71 32 Fuel Please approve: Standard OEM fuel tank and system that comes on the GM4500 with 6.6L Duramax diesel. Tank must be designed to accommodate Diesel fuel 33. FUEL SYSTEM (DIESEL FUEL) a. through j. 72 33 Fuel System (Diesel) 73 36 Exterior Finish, Color and Branding Please approve: Fuel fill on street side and DEF fill on curbside. This is the standard OEM fuel & DEF tanks and system that comes on the GM4500 with 6.6L Duramax diesel. 36. EXTERIOR FINISH, COLOR AND BRANDING d. Exterior surfaces to be painted.. Please approve: For white surfaces, GM OEM white paint on the chassis and white gel coat FRP (not painted) on body upfit. Body panels that are to remain white can be left OEM white. They do not need to be repainted.

# Section Spec Ref Question or Request for Equal Response s 38. FLOOR COVERING 74 38 Floor Covering 75 38 Floor Covering Respectfully request that all references to steps be deleted as there are no steps in a low floor bus. 38. FLOOR COVERING Please approve: Polyurea floor. Arboc also totally encapsulates the single continuous engineered wood floor with polyurea (like a truck bed Rhino liner) - see provided document titled 18. CHASSIS EXTERIOR BODY - FLOOR. 38. FLOOR COVERING e. The floor in the passenger area shall be of a non-skid rubber composition material shall be reviewed with NICE for approvals at the preproduction conference (Appendix 2 PPC-20). 76 38 Floor Covering Please approve: Polyurea, ALTRO or Gerflor as rubber floor is not available. No wood floor. 77 38 Floor Covering 38. FLOOR COVERING i. The floor shall be mechanically fastened and adhesively bonded to steel frame understructure and be a LEVEL and a continuous FLAT PLANE (flat floor no protruding wheel wells) We respectfully request the "no wheel Wells" be deleted as this is required for any low floor cutaway. 38. FLOOR COVERING j. Plywood flooring is not acceptable. Must be composite structure material. APA certified. All surface irregularities shall be filled and sanded smoothly, shall be completely 100 % sealed from moisture penetration prior to being mechanically fastened and adhesively bonded to steel frame understructure 78 38 Floor Covering Please approve: Arboc also totally encapsulates the single continuous engineered wood floor Floor (see document PerformMax500) with polyurea (like a truck bed Rhino liner) - see provided document titled 18. CHASSIS EXTERIOR BODY - FLOOR. Composite structure is not available. 40. OPERATORS SUNVISOR/LIGHT Two (2) flip up type sun visors in color to match the dash panel for the operator shall be provided. Visor shall be OEM. 79 40 Operators' Sunvisor/Light 80 41 Insulation 81 44 Air Conditioning 82 50 Doors 83 61 Front and Rear Proximity Sensor 84 64 Mirrors Please approve: single visor for driver only, as there is no passenger or visor in the OEM cab curbside 41. INSULATION c. Wall and Roof Insulation R-Value (Minimum) = 9.75 Foam sprayed insulation Please approve: R9-1.5" rigid foam insulation for walls and roof Please approve: high performance flexible "astroeco" for radius areas where rigid foam cannot be installed. 44. AIR CONDITIONING VALIDATION Respectfully request that AC validation data from other AC technical specifications (FDOT, Houston, Etc.) be used to satisfy the NICE requirement without additional testing. 50. DOORS The Vehicles will have electric over air operated entrance doors. Please approve: all electric A&M door per provided documentation, as air doors are not available. 61. FRONT AND REAR PROXIMITY SENSOR Front and rear proximity sensor with internal audible alert for the Operator Please approve: rear only, as front proximity sensors are not available for OEM GM front bumpers. 64. MIRRORS b. Interior Convex Mirror: Minimum 10 inch x 5 inch j. A nine (9) inch round convex rearview mirror. Please approve: a single 6" x 9" mirror.

# Section Spec Ref Question or Request for Equal Response s 64. MIRRORS d. Exterior dual convex rearview heated / remote with built in turn signal and flat mirror directly below. 85 64 Mirrors 86 64 Mirrors 87 65 Seating 88 68 Driver Foot Controls 89 69 Steering 90 70 Horn 91 71 Suspension Please approve: Velvac 2020SS or 2020XG per provided documentation. 64. MIRRORS k. Blind spot monitoring indicator system (visual and audible) to be included in the exterior mirrors. Please approve: Velvac visual only blind spot monitoring system per provided brochure. Systems with audio are not available. 65. SEATING h. Two (2) lap seat belts, orange color, to be provided per wheelchair position. Please approve: black lap seat belts, as orange are not available through Q'Straint. 68. DRIVER FOOT CONTROLS Please approve: OEM GM4500 foot controls 69. STEERING Please approve: OEM GM4500 steering controls. 70. HORN a. Two (2) heavy duty horns Please approve: OEM GM4500 Single Horn: Dual Note Tone. 71. SUSPENSION Please approve: Arboc Air Lift system based upon the provided document titled "13 Air System Arboc Operational Sequence" 71. SUSPENSION o. Vehicle suspension shall have a digital display user interface dash panel that provides all vehicle suspension functionality, monitors overall vehicle suspension performance with real-time diagnostics weight distributions, air pressures, and more) capabilities, and allows for real-time remote programming. 92 71 Suspension Please approve: Arboc air lift system without dash monitor. The Arboc system is designed for driver simplicity without the need for additional distracting displays. Any needed system information can be viewed by a maintenance tech plugging in a laptop while on board the bus. See provided document titled Air Lift Pc Application Instructions Must have dash indicator and interlock 71. SUSPENSION p. Vehicle suspension shall consist of two (2) specifically designed air tanks to meet the requirements 93 71 Suspension 94 71 Suspension Please approve: Arboc 1 tank system - we do not require a 2 tank system. See next RFA item for more information. 71. SUSPENSION q. Air suspension system shall contain an emergency manual override auxiliary air support system, which is separate and independent of the vehicle s main air operating system, and which can provide immediate back-up source of air supply to the main air system to allow for the vehicle to be operated directly to servicing under a main air producing system failure. Said auxiliary manual override system shall have its own independent and dedicated air supply tank and manual controls and safety valves. Please approve: Arboc without an auxiliary manual override system. As a safety feature, Arboc is built on a GM4500 with independent front suspension and CAN be driven when kneeled as long as ramp is stowed and passenger door is closed. This a both a SAFTEY and maintenance benefit: in the event the Arboc system loses pressure, the bus and passengers can be driven out of harms way without the complication of an auxiliary back up system. 71. SUSPENSION v. All modifications and/or industry standard wheelbase extensions to the OEM frame rail shall only be made aft OEM chassis cab B pillar. 95 71 Suspension Please approve: Arboc patented front entry utilizes a cut in front of curbside B-Pillar providing more passenger space on curbside. Over 2,000 busses in the field have this forward entry benefit.

# Section Spec Ref Question or Request for Equal Response s 71. SUSPENSION w. No modifications shall be made to the OEM drive train (i.e. engine, transmission), OEM drive train mounts, and/or OEM drive train specified component positioning. 96 71 Suspension Please approve: Arboc patented front entry that utilizes a very slight engine, mount & drive train repositioning. Over 2,000 busses in the field have this slight modification. 72. KNEELING 97 72 Kneeling Please approve: Arboc Air Lift system based upon the provided document titled "13 Air System Arboc Operational Sequence". 72. KNEELING 98 72 Kneeling As an alternate option, please approve a non kneeling model, which provides a 1:5 ramp slope and exceeds the minimum ADA slope of 1:4. The Arboc Spirit of Freedom is identical to the kneeling Spirit of Mobility, except it utilizes the GM suspension and does not have an air ride / air lift system. 73. TIRES c. TPI (tire pressure indicator) on dash instrument cluster. 99 73 Tires GM4500 does not offer a TPMS, we respectfully request this be deleted from the specification. 73. TIRES d. Aluminum wheels, (including spare tire) with no wheel covers. For MY 2015 GM4500, GM changed the front wheel hub, and no after market aluminum wheels are available. This was determined when Arboc recently took delivery of aluminum wheels from Alcoa only to find out the front wheels no longer fit. Alcoa confirmed with GM that the front hub design changed, and no aluminum wheels are available. We also searched a multitude of other wheel manufacturers and no company can provide an aluminum wheel that fits the 2015 GM4500. 100 73 Tires We respectfully request approval of white painted wheel or SS Wheel Covers. 78. WHEELCHAIR SPACE 34W x 60L inches (Minimum). White painted wheel only, SS are not approved. 101 78 Wheelchair Please approve: 34w x 48L (minimum ADA) to accommodate the 5 wheel chair requirement and the 183" wheel base required on the diesel chassis. 81. WINDSHIELD WIPERS/WASHER 102 81 Windshield Wiper/Washer Please approve: standard OEM GM4500 windshield wipers / washer 82. SHOCK ABSORBERS b. Two front shocks and four rear shocks. 103 82 Shock Absorbers Please approve: two rear shock absorbers with two rear airbags to accommodate GM4500 design compatibility. Four rear shocks are not available. 83. GROUND a. Three added grounds shall be installed on the vehicle; all shall be # 0 gauge. 104 83 Ground 105 84 Electrical System Please approve: Arboc standard battery 2 gauge cable which have been engineered to support a fully loaded electrical system and additional safety margin. # 0 gauge is not a standard, it is not needed and would add unnecessary cost. 84. ELECTRICAL SYSTEM Please approve: Arboc electrical system as described in the provided 2015 SOM CONSTRUCTION SPECIFICATIONS starting on page 15. with exception that Battery Disconnect Switch must kill power to entire vehicle, not a partial power protection switch. 106 86/87 Wiring and Switches/Electrical Body Power Distribution Center 86. WIRING AND SWITCHES and 87. ELECTRICAL BODY POWER DISTRIBUTION CENTER Please approve: Arboc electrical system as described in the provided 2015 SOM CONSTRUCTION SPECIFICATIONS starting on page 15. Electrical system as described in Arboc attachment is approved with exception of Battery disconnect switch. The Battery disconnect switch MUST kill all power and electrical to bus, not partial power and electrical as described in Arboc electrical system attachment.

# Section Spec Ref Question or Request for Equal Response s 92. TRAINING a. through f 107 92 Training This appears to be a large transit bus spec. We respectfully request this be reduced to typical cutaway training requirements. 107. TOWING b. At a minimum shop air connectors shall be provided at the front and rear of the bus and shall be capable of supplying all pneumatic systems of the bus with externally sourced compressed air. The location of these shop air connectors shall facilitate towing operations. 108 107 Towing This appears to be a large transit bus spec. We respectfully request this be removed from the spec as shop air is not available on a GM4500 Arboc low floor cutaway. The only system requiring air is the ride / lift / kneeling system. In the event an Arboc lift system lost pressure, the driver can maneuver the bus and the passengers out of harms way while in the kneeled position. The tank and air bags can then be filled through a Schrader valve once the bus is in a safe location so the bus can be driven to a maintenance facility. 109.1 OPTIONAL EXTENDED WARRANTIES The Contractor shall offer extended warranties on the engine, transmission, HVAC and Brake System Excluding friction material. Each extended warranty shall cover years three, four and five and start upon completion of the original two (2) year warranty. 109 109.1 Optional Extended Warranties 110 109.4 Subsystem and Component Warranty 111 124 Keys Extended warranties are not available on a GM4500 for any of these systems, and we therefore respectfully request this requirement be removed. 109.4 SUBSYSTEM AND COMPONENT WARRANTY Please approve: GM, Arboc, and Arboc supplier warranties per the provided warranty breakdown. 124. KEYS b. Five (5) sets of keys shall be provided with each vehicle. Five sets of keys per vehicle from GM will be very costly. Suggest 2 sets per vehicle. 112 17 Brakes 17f Please accept a mechanical parking brake as this is the only type available on a cutaway chassis 22. The New York State Bus bid required low floor buses to have been tested to demonstrate compliance 113 22 Body with FMVSS 214 for side impact protection since on such buses, passengers are in the impact zone for autos. Do you require compliance with 214? Needs to be in compliance with FMVSS 214 Side Impact Protection for buses. 114 10 Disadvantaged Business Enterprise Will Transdev change the paragraph to I hereby certify that the Bidder/Offeror has complied with the requirements of 49 CFR Part 26.49 and is listed on FTA's certified list of Transit Vehicle Manufacturers, or has submitted a current goal methodology to FTA that has been approved or has not been disapproved to reflect 49 CFR Part 26.49(a)(1)? No change. 115 10 Disadvantaged Business Enterprise Since a foreign Subcontractor might not have a Federal ID #, may a Bidder/Offeror list N/A in this space? Not This is a FTA requirement 116 10 Disadvantaged Business Enterprise What is the relevance or rationale in obtaining the Year Business Started for non-dbe Subcontractors? Not This is a FTA requirement 117 10 Disadvantaged Business Enterprise What is the relevance or rationale in obtaining the Gross Receipts for non-dbe Subcontractors? Not This is a FTA requirement 118 10 Disadvantaged Business Enterprise 119 10 Disadvantaged Business Enterprise 120 10 Disadvantaged Business Enterprise 121 10 Disadvantaged Business Enterprise 122 10 Disadvantaged Business Enterprise If a Bidder/Offeror list cannot obtain the Gross Receipts for a non-dbe Subcontractor, may that Bidder/Offeror list N/A in that space? Not Acceptable Although all Offerors should certainly support the participation of DBEs, MBEs, WBEs and SBEs, will Transdev confirm that Offerors are not required to identify any DBEs, MBEs, WBEs and SBEs at the time of bid submittal (since there is no project-specific DBE goal and the successful Offeror will report their DBE participation directly to FTA Office of Civil Rights)? This is required per IFB V1488 Since every DBE is, by definition, also a SBE and either a MBE and/or WBE, will Transdev confirm that individual DBE subcontractor data should not be repeated under M/MBE and/or SBE subcontractor data? Yes Since not every MBE and/or WBE may necessarily be DBE or SBE, will Transdev confirm only MBEs and MBEs that are neither DBE nor SBE be listed in the M/WBE subcontractor section? Yes Presuming Disadvantaged MBEs/WBEs (i.e., DBEs) are identified in the first subcontractor (DBE) section and non-disadvantaged MBEs/WBEs are identified in the second subcontractor (M/WBE) section, will Transdev clarify only SBEs that are non-mbe and non-wbe should be identified in the third subcontractor (SBE) section? Yes