HSP 643 WAVE
structure and components Vertical motion double drive system, two linear rollers high preloaded guideways, two guideways in a composite material. Vertical Z motion supported by two pneumatic cylinders. Sealed linear encoders. Resolution = 0,0001 mm. Grinded work table with T type slots. Highly accurate linear roller guideways incorporated in four rows. Cast iron portal structure, whose components have been properly studied and tested in order to avoid thermal distortion. Automatic, centralized lubrication system for ball screws and guideways. Ground balls recirculation screws with single preloaded leadnut.
HSP 643 RB 5 axis continuous
Conceived for high speed milling, it perfectly meets those requirements of reliability in time, essential for such an important component of the machine. It is available in the 30.000 or 40.000 rpm, 7 kw, or 30.000 rpm, 8 kw. The spindles are cooled through a liquid cooling system. It allows to obtain a high level of precision and excellent surfaces on parts in hardened steel or in copper electrodes, also using tools with very small diameters thanks to the high number of rpm, to the optimisation of the bearings preload and to the very limited thermal distorsion. 7kW spindle power/torque diagram 8kW spindle power/torque diagram
Pallet changer
8/17 position automatic pallet changer
HSP 643 / HSP 643 RB Working range x [mm] 650 y [mm] 420 z [mm] 350 Table surface [mm] 700x400 Work spindle Power of the spindle 8KW 7KW Torque S1 11 N/m 5,5 N/m Torque S6 40% 13 N/m 7,2 N/m RPM 0-30.000 0-30.000/40.000 Tool chuck HSK 40-E Axes Rapid traverse rate 0 20.000 mm/min Feed rate 0 20.000 mm/min Accuracy 0,002 Controls Heidenhain Motors AC Drivers digital Optionals Tool changer Graphite removal unit Coolant system 4th rotating axe and 5th tilting axe Copying and digitalizing system Ethernet connection 16/20/28/40 places 643 643 RB Machine weight 4500 kg 5000 kg Pallet changer weight 850 kg 850 kg. Max. machine height 2525 mm 2650 mm 4th and 5th axis specifications (RB) Disk diameter Ø 248 Bore dimension of bar passage Ø 51 through T slot dimension 6x 9,7 Rotary axis braking torque 400 N/m Tilting axis milling torque 1200 N/m Max working torque 200 N/m Max working speed 6000 Min Minimum angular movement 0.001 Max tilting thrust 0 600 Kg Max tilting thrust 90 x L = 250 mm 200 Kg Tilt range -10 130 Max dimensions of workpiece Ø 300 x 270 Max Working X-axis stroke 260 mm Working Y-axis stroke 470 mm Working Z-axis stroke 350 mm Max opening size spindle nose table 420 mm Option: Erowa or System 3R clamping systems
HSP 643 / HSP 643 RB 2985 510 1800 675 power supply 3345 1420 1210 graphite removal unit air supply electrical cabinet spindle coolant unit air direction lubrification impeller tool coolant system 715 580 16 place tool changer 790 734 monitor 1929 with pallet changer 2775 302 1800 673 1703 97 800 555 897.5 900 500 electrical cabinet spindle coolant unit 1370.5 pallet load pallet changer 4502 air supply lubrification impeller 1521 tool coolant system 713 580 16/20/28 place tool changer monitor 790 734 1929
HSP 443 SKY
HSP 443 SKY Working range x [mm] 400 y [mm] 400 z [mm] 300 Table surface [mm] 500x400 Work spindle Power of the spindle 7KW Torque S1 6 N/m Rpm 0 30.000 /40.000 Axes Rapid traverse rate 0 20.000 mm/min Feed rate 0 20.000 mm/min Accuracy 0,002 Controls Heidenhain Motors AC Drivers digital Sealed linear encoders Optionals Tool changer Graphite removal unit Coolant system 4th rotating axe and 5th tilting axe Copying and digitalizing system Ethernet connection 9/16 places Machine weight Machine height 4200 kg 2505 mm 2990 830 760 power supply tool coolant system 1210 graphite removal unit electrical cabinet spindle coolant unit air supply X air direction lubrification impeller 1421 3345 Y 714 1769 664 monitor 1870
HSP 1000
Working range x [ mm] HSP 1.000 1.000 y [ mm] 600 z [ mm] 400 Table surface [ mm] 1.100x650 Work spindle Power of the spindle Torque S1 Torque S6-40% Rpm Tool chuck Angle encoder Coolant pass inside the spindle 19KW 31 N/m 40. 8 N/m 0-30.000 HSK 50-E standard optional 8KW 11 N/m 13 N/m 0-30.000 HSK 40-E optional not available 7KW 5.5 N/m 7.2 N/m 0-30.000/40.000 HSK 40-E not available not available Axes Rapid traverse rate 0 20.000 mm/min Feed rate 0 20.000 mm/min Accuracy 0,002 Controls Heidenhain Motors AC Drivers digital Optionals Tool changer Graphite removal unit Minimal cooling 4 th rotating axe and 5 th tilting axe Copying and digitalizing system Ethernet connection 20/24/32 Places Machine weight Machine height 6300 kg 2700 mm 400 3100 1200 700 500 2000 300 400 600 4600 350 2800 1450 1650 1150 air direction power supply spindle coolant unit cabinet with lubrication pump electrical cabinet air supply cabinet 765 745 door opening monitor 1200
Accessories Several coolant systems. Tool setting probe separated from the working area through a sliding door. Tool magazine, separated from the working area through a sliding door. Automatic tool setting laser system, contact-free. Rotating and tilting table for 4 th and 5 th driven axe. Workpiece touch probe. Copying and digitizing device. Graphite removal unit.
Applications Cavity for brass hot pressing Absolute fidelity reproduction by means of the digitizing system 52/54 HRc hardened steel part Copper electrode for watch-case Implant in titanium for the dental sector Bridge in cobalt chrome for the dental sector Hardened steel mould for plastic moulding Mould for button 52/54 HRc hardened steel cavities machined by Ø 0,2 mm. tool Graphite electrode
clessidra87.it 04/13-100 ISPER machines bear the mark Our products are subject to constant improvements. We therefore reserve the right to change their characteristics without other notice. Via Berlino, 7 24040 Zingonia Verdellino Bergamo Italy Tel. +39 035 4821601 Fax +39 035 4821641 www.isper.it E-mail: isper@isper.it