Custom designed davits with to 500kg+ TYPE S Standard T-DAVIT Beam with dual NOW fully Type B compliant TYPE W Standard Winched T-DAVIT Beam & TYPE VS Sliding Beam T-DAVIT with dual Winched Sliding Beam T-DAVIT & - Upper Winch Winched Sliding Beam T-DAVIT & - Lower Winch TYPE T T-DAVIT Beam for Geared Trolley with End Stops Product Information www.reidlifting.fr
Custom designed davits with to 500kg+ 500 kg Class B (Type S & W) TYPE S Standard beam with dual NOW fully Type B compliant TYPE W Standard winched beam & TYPE VS Sliding beam with dual Winched sliding beam & -Upper winch Winched sliding beam & -Lower winch TYPE T Beam for geared trolley REID s T-DAVIT custom davit cranes provide an extensive range of systems that enhances its PORTA-DAVIT family of lightweight lifting solutions. Most systems can be located, assembled and operated by just one, in the most challenging situations. A bagged solution makes it simple for engineers to carry the DAVIT to each job and store centrally or in service vehicles. This means that just ONE DAVIT can replace MANY fixed traditional systems, with the resultant savings in capital and maintenance as well as many operational benefits including health & safety considerations. The T-DAVIT range of customised options includes Chain-block and Winched lifting across a range of configurations designed to address the difficult and often confined space lifting requirements; frequently providing a unique solution to otherwise impossible or highly manpower or equipment intensive and expensive lifting challenges. Being individually developed, innovative custom solutions, the T-DAVIT capability provides a wide and ever growing range of configurations, options and solutions so, please discuss your specific lifting challenges and requirements with REID Lifting. T-DAVIT S & W series systems have undergone Type B witnessed testing and a range of options been proven to be compliant for such Fall Protection and Personnel Positioning applications, as well as goods lifting. General Purpose Offshore Cranes standard: BS EN 3852-:2004 options also now available for Series S & W. ATEX: All models suitable for use in ATEX Zone 2 explosive atmospheres. The compatibility for use in ATEX Zone is available as an option. 3 x N.B. All lifts should follow the relevant Risk Assessment and Method Statement and be undertaken by nel trained in the safe use of the equipment used. T-DAVITs are available in a wide range of configurations to meet your specific requirements: Tel : +33 (0)2 97 53 32 99 - contact@reidlifting.fr www.reidlifting.fr
Custom designed davits with to 500kg+ 500 kg Class B (Type S & W) TYPE S Standard beam with dual TYPE W Standard winched beam & T-DAVIT Family Capabilities: TYPE VS Sliding beam with dual Winched sliding beam & -Upper winch Winched sliding beam & -Lower winch Being fully custom units each T-DAVIT is designed for specific applications with options such as Winches, Trolley radius adjustment, jib radius adjustment, angled beam, etc. > Lightweight & portable custom davits. > ratings to 500Kg for 65mm sockets and 750kg with PD000 column. > Types S & W supplied with dual positions - Horizontal (Pos A) and Angled (23 ) (Pos B) as standard > Standard Radius from 500mm to 2000mm (Custom to 3000mm) with reduced range of s see T-DAVIT capability table. > Type B compliant options available (Types S & W) witnessed tested. > General Purpose Offshore Cranes standard: BS EN 3852-:2004 compliant options available (Types S&W) witnessed tested. > Custom Types VS, VW & T provide dynamic radius adjustment under load and Type T a geared trolley system for easy load positioning. > Height and Radius customisable Height of lift can be increased with socket extensions. > Radius adjustments range options available in 00mm increments. > Ultra low friction bearing system for easy 360 rotation. > Weight - within Manual Handling guidelines. > Anodised finish for environmental protection & options suitable for clean environments. > Simple, rapid assembly - 2 piece design, no tools required. > Portable - Flat-pack in heavy duty bags high utility & manual handling compliant. > Winch or shackle (x2) use as well as master link trolley options. > ATEX All models suitable for use in ATEX Zone 2 explosive atmospheres. The compatibility for use in ATEX Zone is available as an option. 3 x TYPE T Beam for geared trolley Now ATEX certified (65mm Sockets, as per the PORTA-DAVIT, excluding the PORTA-BASE. PD000 column systems require 95mm sockets) 65mm sockets Flush Mount Top Mount Side Mount Bridge Mount Bespoke Socket Extension Tel : +33 (0)2 97 53 32 99 - contact@reidlifting.fr www.reidlifting.fr
TYPE W & S The bespoke T-DAVIT is lightweight, portable and manufactured with specific needs in mind. 500kg An extensive range of davits offering up to 500kg with 360 rotation under finger tip control for those difficult locations, giving a wide range of standard height and radius options and available customisation. Particularly suited to situations with environment constraints (headroom, handrails etc.) with a wide range of configurations available. Designed to comply with manual handling regulations and to avoid assembling the davit at height. Note: TYPE W provides Winch & Shackle lifting points. TYPE S provides Shackle lifting only. Standard Type W (Winch and Shackle) T-DAVIT Standard Type S (Shackle only) T-DAVIT T-DAVIT Information: GOODS Up to 500kg (see table on next page) PERSONNEL Configurations available up to 50kg PERSON FALL ARREST :202 certified - as part of an EN363 compliant system ATEX Suitable for use in ATEX Zone 2 explosive atmospheres LIGHTWEIGHT & PORTABLE - Manual handling compliant - Reduced maintenance costs - Bagged for easy transportation and storage RAPID ASSEMBLY Assembly & operation by, no tools required - just 2 main components RADIUS ADJUSTMENT Operational radius up to 3000mm - subject to reduction (900mm maximum for ) EASE OF ROTATION 360 o rotation under full load with fingertip control CORROSION RESISTANT Clean anodised finish to increase wear resistance UNIVERSAL KINGPIN Mates with all 65mm REID sockets (or sleeves for existing sockets). Also suitable for use with socket extensions SPECIFICATIONS - 2 lifting positions as standard (A&B) - Twin for index lifting and/or attachments for winching Patent pending. Options & Upgrades: Integrated wheel carrier for reduced manual handling Beam radius adjustment Fall arrest (:202) and nel winching
Custom designed davits with to 500kg+ T-DAVIT Type W capabilities and dimensions: 500 kg Class B (Type S & W) Position B B 25 73 50 Options T-Davit 65mm Sockets Socket Extensions P2 P P2 P Flush Mount W5 W5 W4 W4 W3 W3 W2 W W Bridge Mount Side Mount D Type W Top Mount Position A A Radius Radius B B Radius Radius A A HOL: +264mm SE500 HOL: +500mm SE800 Position A HOL A HOL: +800mm HOL B SE00 HOL: +00mm Datum Beam Option 2 3 4 Position A B A B A B A B Radius (mm) 000 925 200 0 600 478 2000 850 Load Rating (kg) 500 400 300 250 Load Rating 2 (kg) 500 500 375 300 Height of Lift (HOL) (mm) Column Option Winch Position P P2 A B A B A B A B W 90 839 5 839 227 839 380 839 532 982 08 W2 320 W 90 2 09 33 09 407 09 560 09 72 W2 320 62 26 W3 625 W 90 W2 320 3 329 64 329 77 329 870 329 2022 W3 625 472 57 W4 755 W5 885 W3 625 4 644 956 644 2032 644 285 644 2337 W4 755 787 886 W5 885 5 954 2266 954 2342 954 2495 954 2647 W5 885 2097 296 Please note that dimensions may vary marginally. Tel : +33 (0)2 97 53 32 99 - contact@reidlifting.fr www.reidlifting.fr
LEEA Member ISO 900 ISO 400 OHSAS 800 The Queen s Award for Enterprise: Innovation LIGHTWEIGHT PORTABLE SAFE Type S Dimensions Position B Position A HOL B P2 P HOL A Radius B Radius A Type S Beam Option 2 3 4 Position A B A B A B A B Radius (mm) 850 775 050 960 450 328 850 700 Load Rating (kg) 500 400 300 250 Load Rating 2 (kg) 500 500 375 300 Column Option Height of Lift (HOL) (mm) A B A B A B A B P P2 92 224 92 300 92 453 92 605 982 08 2 092 404 092 480 092 633 092 785 62 26 3 402 74 402 790 402 943 402 2095 472 57 4 77 2029 77 205 77 2258 77 240 787 886 5 2027 2339 2027 245 2027 2568 2027 2720 2097 296 Custom Variations Available: TYPE VS Sliding beam T-DAVIT with Variable radius Shackles Variable Winched sliding beam T-DAVIT with & ergonomically positioned winch (upper or lower) TYPE T Geared Trolley T-DAVIT
Custom designed davits with to 500kg+ 500 kg Class B (A & B Series) Type S & W - supplied as Angled 23 & Standard Horizontal: Now with radius to 3000mm with PD000 column & 95mm sockets. PD000 column for 95mm sockets: Radius mm kg Pos A Pos B 750 200 750 200 0 560 600 478 500 800 665 440 2000 850 400 2200 2035 350 2500 232 300 3000 2775 95mm Sockets Flush Mount Top Mount Bridge Mount Side Mount Please don t hesitate to contact REID Lifting to discuss your particular requirements.. Please note that dimensions may vary marginally. All information herein is copyright protected by Reid Lifting Ltd. All company and product names are Trade Mark and Trade Name protected and all REID Product IPR is protected under Patents, Patents Pending and/or Design Rights.
LEEA Member ISO 900 ISO 400 OHSAS 800 The Queen s Award for Enterprise: Innovation LIGHTWEIGHT PORTABLE SAFE REID Lifting - the best night's sleep in the lifting industry Systems are type tested at UKAS accredited laboratories Every individual system is fully inspected or tested prior to shipment Full product design & development Technical Files are available for inspection Lifting Equipment Engineers Association (LEEA) full mebership ISO900 Quality Management System certification ISO400 certification environment management systems and standards OHSAS800 Occupational Health & Safety Management certification Certification of products by relevant recognised bodies from sockets to systems Safe assembly, operation & maintenance manuals and training provided for all systems REID Lifting France - PA de Kerboulard, 3 rue Gutenberg 56250 ST-NOLFF Tel : +33 (0)2 97 53 32 99 - Fax : +33 (0)2 97 53 04 86 contact@reidlifting.fr TD/FREN/V3/207/09/06