YOUR DRILLING EXPERT OIL & GAS CATALOGUE.

YOUR DRILLING EXPERT OIL & GAS CATALOGUE www.halcorocktools.com

OUR COMMITMENT TO YOU At Halco Rock Tools we pride ourselves on providing exemplary levels of customer service, support and training no matter what your drilling requirements are. Having manufactured drilling consumables for over sixty five years our support team are well placed to provide accurate and timely solutions to optimise your drilling performance. Halco Rock Tools is a world class manufacturer of Down-The-Hole (DTH) drilling equipment with locations around the globe, and headquartered in the UK. Halco pioneered the development and distribution of DTH hammers in the 1950s. Produced for more than 65 years, our products continue to be regarded as some of the most reliable and durable available today. This is due to our commitment to exceeding customer needs, design expertise and rigorous product testing in extreme drilling conditions. The hammers and drill bits in this catalogue are designed to offer optimum drilling performance in Deep Well Oil and Gas applications. Additional hammers and bits are available for the following applications: Mining and Quarrying Civil Engineering & Construction Exploration Geothermal/Waterwell We can offer training in hammer and bit selection, service, maintenance and repair. With specialists available at all of our locations, you re never far away from the support you require. Halco s superb team of engineers are only a phone call away. Further Learning Aids: A-Z of DTH Drilling DTH Maintenance Manual User Guide www.halcorocktools.com 2

QUICK REFERENCE GUIDE HOLE SIZE HAMMER SHANK PAGE 6 " SUPERIOR 600 QL 60 10-11 SUPERIOR 800 IR DHD 380 12-13 8 " SUPERIOR 850 QL 80 14-15 10 " SUPERIOR 1000 SD 10 16-17 SUPERIOR 1200 IR DHD 112 18-19 12 " SUPERIOR 1250 IR DHD 112S 20-21 Your Drilling Expert 3

DEEPWELL DTH HAMMERS Deepwell DTH Hammers Halco deepwell hammers are the obvious choice for the Oil and Gas industry where both maximum speed and reliability are expected. Our specifically designed hammers and bits help you stay in the hole longer thereby saving you time and money. All Halco deepwell hammers are manufactured at our state-of-the-art facility using only the highest quality heat treated nickel chrome alloy steels in accordance with ISO 9001:2008. Designed and manufactured to exacting standards, our hammers are renowned for delivering exceptional productivity and durability whatever your application. Using the latest computer-aided-design, computational fluid dynamics and tooling machinery our hammers are alive with enginnering. Oil and Gas Hammer Range Size Hammer Type Part Number Shank 6" Superior 600 600431 QL 60 7" Superior 750 600439 SD 8 8" Superior 800 600432 QL 80 Superior 850 600433 DHD 380 10" Superior 1000 600434 SD 10 12" Superior 1200 600435 DHD 112 Superior 1250 600436 DHD 112S 15" Superior 1500 600437 SD 15 18" Superior 1800 600438 SD 18 Drilling Parameters Size Hammer Type Drilling Diameters Air Pressures 6" Superior 600 156-241mm (6 1/8-9 1/2) 100-435 psi (7-30 bar) 7" Superior 750 192-300mm (7 1/2-12") 100-435 psi (7-30 bar) 8" Superior 800 222-270mm (8 3/4-10 5/8") 100-435 psi (7-30 bar) Superior 850 200-311 mm (7 7/8-12 1/4") 100-435 psi (7-30 bar) 10" Superior 1000 254-381mm (10-15") 100-435 psi (7-30 bar) 12" Superior 1200 381-489 mm (15-19 1/4") 100-435 psi (7-30 bar) Superior 1250 438-660mm (17 1/4-26") 100-350 psi (7-24 bar) Air Consumption CFM PSI 4

HALCO BIT CATCHER SYSTEM Halco Bit Catcher System Broken bits can cost a great deal in time, productivity and money. With the Halco Bit Catcher System you can prevent the need for any additional time and expense of challenging fishing procedures to save your hole. Designed to fit a wide range of Halco s best in class down-the-hole hammers, our Bit Catcher System provides an effective retention method should the drill bit break above the head of the bit. Should a breakage occur in this area the head of the bit is retained within the Bit Catcher System and not lost down the hole. The Halco Bit Catcher System uses a specially designed Chuck and Drill Bit arrangement to ensure there is no loss of drilling performance from either the hammer or bit whilst providing the driller with the reassurance that should a breakage occur the drill bit will be securely retained within the catcher system. Catcher Bit Assemblies Size Shank Type Bit Part Diameter Number Inch mm Design Type 653520 6 1 /4" 159 mm Concave Diamond 6" QL60 653528 6 1 /4" 159 mm Concave Diamond Gauge 653536 7 7 /8" 200 mm Concave Diamond 653537 7 7 /8" 200 mm Concave Diamond Gauge 8" DHD380 653549 8 1 /2" 216 mm Convex Diamond 653507 8 3 /4" 222 mm Concave Diamond 653513 8 3 /4" 222 mm Concave Diamond Gauge 653548 8 3 /4" 222 mm Convex Diamond 653551 8 3 /4" 222 mm Convex Diamond Gauge 653532 8 7 /8" 225 mm Concave Diamond 653533 8 7 /8" 225 mm Concave Diamond Gauge 653489 9 7 /8" 251 mm Concave Carbide 653483 10" 254 mm Concave Carbide QL80 653517 8 3 /4" 222 mm Concave Diamond 653527 8 7 /8" 225 mm Concave Diamond 653519 9 7 /8" 251 mm Concave Diamond 653529 9 7 /8" 251 mm Concave Diamond Gauge 10" SD10 653523 10 5 /8" 270 mm Concave Diamond 653530 10 5 /8" 270 mm Concave Diamond Gauge 653524 11" 280 mm Concave Diamond 653531 11" 280 mm Concave Diamond Gauge 12" DHD112 653518 12 ¼" 311 mm Concave Diamond Gauge 653511 12 1 /4" 311 mm Concave Diamond 653506 12 3 /8" 314 mm Concave Diamond 653534 12 3 /8" 314 mm Concave Diamond Gauge 653547 12 3 /8" 314 mm Convex Diamond 653550 12 3 /8" 314 mm Convex Diamond Gauge 653540 14 3 /4" 375 mm Concave Diamond 653541 14 3 /4" 375 mm Concave Diamond Gauge 653538 15" 381 mm Concave Diamond 653539 15" 381 mm Concave Diamond Gauge 653508 17 1 /2" 445 mm Concave Diamond 653535 17 1 /2" 445 mm Concave Diamond Gauge 653552 17 1 /2" 445 mm Concave Carbide Hammer / Bit Catcher Compatibility Hammer Chuck Catcher Outside Dia Hammer Type Shank Type Number Number SK RK MM Inches Superior 600 QL60 600313-BC 602408 SK43 RK110 148 mm 5.827" Superior 800 DHD380 600309-BC 604632 SK25 RK112 200 mm 7.874" Superior 880 DHD380 600312-BC 604632 SK25 RK112 200 mm 7.874" Superior 880 DHD380 600261-BC 604632 SK25 RK112 200 mm 7.874" Superior 850 QL80 600245-BC 601449 SK32 RK114 204 mm 8.031" Superior 1000 SD10 600248-BC 604652 SK29 RK115 250 mm 9.842" Superior 1200 DHD112 600142-BC 604640 SK14 RK117 292 mm 11.496" Your Drilling Expert 5

DRILL BIT OVERVIEW What are Down-The-Hole Drill Bits and how are they used? Down-the-hole (DTH) drill bits are used with Down-the-hole hammers for drilling holes through a wide range of rocks types. In conjunction with our DTH hammers, our drill bits are designed with a splined drive for rotating the bit in the ground. Drill bits are available in different sizes and configurations so they can drill a wide range of hole sizes, in different ground conditions. How have DTH drill bits developed? Rapid advances in drill bit technology have occurred throughout the last 40 years. The first type of drill bits used with down the hole hammers were cross bit design. Four chisel shaped lengths of tungsten carbide were brazed into the bit body. The action of brazing created stresses within the drill bit thereby limiting its life. A further disadvantage of the cross bit design was that the majority of the carbide was situated around the centre of the bit face and not towards the outer edge of the drill bit where there is the most rock to cut. In the late 1960 s however, the button bit was introduced, this was a landmark in the progress of DTH equipment which led to bit lives previously unheard of. The button bit design eliminated the primary shortcomings of the cross bit. Applications FOR Overburden Systems Soft soil is normally drilled with augers or by the rotary method but DTH hammers have been adapted to handle soft conditions by being able to drill and case the hole simultaneously using an concentric bit which can be withdrawn on completion of the bore hole, leaving the casing in situ, thus preventing hole collapse. We guarantee to have a drill bit that can tackle any challenge Cylindrical button inserts are precision ground to extremely close tolerances and pressed into the drill bit as an interference fit. This resulted in improved carbide insert retention by eliminating brazing stresses and other defects associated with brazing and braze materials. Button inserts are distributed more efficiently than cross bit inserts by providing more cutting power where it is needed at the outer edge of the drill bit face. In many cases, the need to sharpen the drill bit was eliminated with the arrival of the button bit and the improved cutting action provided increased drilling rates particularly in hard rocks. While the cross bit design is still used in some rotary and drifter applications where the rock is very soft, the button bit is now used in virtually every DTH application. 6

HEAD DESIGNS INSERTS TYPES DRILL BIT SELECTION GUIDE As with Halco hammers it is crucial that you choose the right drill bit otherwise it will cost you both in time and money. We pride ourselves on having a comprehensive range of drill bits on offer so you can be sure that you will definitely find a suitable bit for any project you are undertaking. Our carburised drill bits are among the best in the world providing outstanding performance and durability. We produce all our drill bits at our specialized plant where they are made out of high quality nickel chrome alloy steel, carburised and heat-treated to offer extra protection against wear and fatigue. Every hole in the bit head is machined to within microns and fitted with carbide inserts which provide the cutting action of the rock. We have three different bit heads on offer, Convex, Flat Face and Concave, also with three different inserts we guarantee we have a drill bit that can tackle any challenge and rock face formation. The two most important factors in choosing the right drill bit are productivity and reliability. For soft to medium rock formations where penetration rates are high the ballistic and semi-ballistic inserts coupled with flat face or concave bit heads are more suitable. If the rock formation is on the hard to very hard side, it is more advisable to use a domed insert with convex head this will result in a longer drill bit life. Flat Face Alternative design for all rock conditions especially fractured and fissured rocks and changing formations. Concave Alternative design for all rock conditions particularly deep hole drilling can improve hole alignment as a result of inverted pilot. Convex Strong design for all conditions especially hard abrasive rock.good balance of fast drilling and long service life. Ballistic Inserts Suitable for soft and medium compact low abrasive rocks producing large cuttings. Not suitable for badly fractured rocks. Domed Inserts Strong rugged shape for high performance and good service life in all conditions particularly suitable for very hard abrasive rocks and deep hole drilling. Semi-Ballistic Inserts Suitable for all soft and medium rock conditions including fractured and fissured rocks. Your Drilling Expert 7

DRILL BIT INSERT GUIDE Domed Inserts SOFT ROCK <100 MPA (e.g. Limestone, Sandstone, Shale) Ballistic Inserts Can be used but does not result in optimum productivity Ideally suited for that formation MEDIUM ROCK 100-150 MPA (e.g. Slate, Dolomite) Can be used with satisfactory results Semi Ballistic Inserts Can be used with satisfactory results Ideally suited for that formation Can be used with satisfactory results HARD ROCK >150 MPA (e.g. Granite, Basalt, Quartz) Ideally suited for that formation Can be used with satisfactory results Can be used but does not result in optimum productivity Can be used but does not result in optimum productivity 8

HALCO MAINTENANCE KITS Here at Halco we pride ourselves on our commitment to fully supporting every project right until completion. Every driller always wants to get the maximum level of production from their drilling tools, and we ensure this through our exceptional technical and service support. Using Halco service, repair and life kits can further your drilling production rates and prevent down time when it matters most. We have implemented three different maintenance levels to ensure that you get the right level of support at the right cost. These range from a basic service right through to a full overhaul repair of a hammer. Benefits of Halco maintenance kits - Increased hammer life - Improved drilling rate of penetration - Prevention of lost time - Ease of maintenance - Ability to repair hammer on site SERVICE KIT (SK) Halco service kits are recommended for routine maintenance, providing an easy and convenient method for replacing essential consumable items. Extending hammer life and ensuring that they are available when you need them. Service Kit Contents: Snap Rings, O Rings, N.R.V. Springs REPAIR KIT (RK) In applications where longer term hammer usage or multiple hammers are in service, the Halco repair kits offer additional protection. Providing key replacement components in addition to those of the relevant service kits. These kits are ideal for drilling projects in remote locations where performance up-time is critical. Repair Kit Contents: Chuck, Snap Rings, O Rings, N.R.V, N.R.V. Spring, Bit Guide Bush LIFE KIT (LK) When drilling in highly abrasive ground conditions a Halco life kit is used to replace the external hammer parts that become worn. Extending hammer life and ensuring optimum productivity. Life Kit Contents: Top-Adaptor, Cylinder and Chuck Halco Recommended Maintenance Levels Maintenance Level Rock Formation Hammer Life Required Kit(s) Basic None Abrasive > 10,000 m SK Intermediate Medium Abrasive 5,000-10,000 m RK Extensive Highly Abrasive < 5,000 m LK Your Drilling Expert 9

6 SUPERIOR 600 AT A GLANCE SIZE 156-241mm (6 1/8-9 1/2") SHANK QL 60 AIR PRESSURE 100-435 psi (7-30 bar) SUPERIOR 600 Choke system to allow adjustment of air flow to improve flushing. The Superior 600 high performance hammer drills under a head of water typically suited to Waterwell and Geothermal applications due to its robust non ported piston design. A choke facility helps to adjust air flow through the hammer. Suitable for operation at air pressures up to 30 bar. Drilling diameters of 156-241mm (6 1/8-9 1/2"). Optimised drive chamber capacities to maximise hammer performance. Available Shanks QL 60 Robust simple piston design for optimum strength and performance. 2000 Air Consumption 1500 CFM 1000 500 12 spline QL60 shank reduces contact stress and wear rates. 0 100 150 200 250 300 350 400 450 500 PSI Blank Plug 1/8 Plug 3/16 Plug Figures are based on theoretical data 10

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Hammer Overview Hammer Type Superior 600 Part Number 600431 Shank QL 60 Top Thread 3 1 /2" Api Reg Pin Flat Hammer size 101 mm (3.976") Weight 86 kg Outside Diameter 140 mm (5.512") Make Up Length 1035.15 mm (40.754") Recommended Minimum Thrust 500 kg (1100 lbs) Recommended Maximum thrust 1500 kg (3300 lbs) Parts List Hammer Type Superior 600 Shank QL 60 Maintenance Kits Model Number 600431 Service Kit Repair Kit Life Kit Item Description SK68 RK105 LK03 1 Thread Protector - - - 2 Top Adaptor - - 1 3 O-Ring 2 2-4 M/UP Shims - 4-5 Compression Spring - 2-6 NRV - 1-7 NRV Bleed Plug 2 2-8 Spring 2 2-9 Air Distributor - - - 10 O-Ring 2 - - 11 Liner - - - 12 Cylinder - - 1 13 Snap Ring 2 2-14 Piston - - - 15 Snap Ring 2 2-16 Guide Bush - 1-17 O-Ring 2 2-18 Bit Retaining Rings - 1-19 O-Ring 2 2-20 Chuck - 1 1 21 End Cap - - - Drill Bits Part Diameter Face Buttons Over Weight Number mm Inch Design Type Qty / Dia Size (kg) QL 60 650094 156 6 1 /8 Concave Domed 16 x 16 mm 23.2 653139 165 6 1 /2 Concave Domed 18 x 18 mm 24.4 653160 171 6 3 /4 Convex Domed 19 x 18 mm 25.3 653128 178 7 Concave Domed 8 x 20 mm + 11 x 16 mm Y 26.2 653227 190 7 1 /2 Concave Domed 24 x 16 mm Y 31.7 653142 203 8 Concave Domed 31 x 16 mm Y 34.1 653211 241 9 1 /2 Concave Domed 18 x 20 mm / 10 x 16 mm Y 39.5 Additional drill bit configurations are available upon request 20 21 Your Drilling Expert 11

8 SUPERIOR 800 AT A GLANCE SIZE 200-311mm (7 7/8-12 1/4") SHANK IR DHD 380 AIR PRESSURE 100-435 psi (7-30 bar) One piece top-adaptor reduces internal parts. No make up required. External N.R.V. for easy maintenance. Revised chamber volumes and cycle timing to optimize performance. SUPERIOR 800 The Superior 800 Deep-Well hammer has been specifically designed for drilling deep holes under a head of water. The one piece top-adaptor with N.R.V. (Non-Return-Valve) makes it easy to maintain and service the hammer. The wide body diameter of the Superior 800 allows for an increased piston weight and therefore an improved performance. A variable choke for increased air volume can be fitted to the Superior 800 to suit compressor volume outputs. Suitable for operation at air pressures of 100-435 psi (7-30 bar). Drilling diameters of 200-311mm (7 7/8-12 1/4"). Simplified piston geometry for improved balance and location within the cylinder. Available Shanks IR DHD 380 Air Consumption 3500 3000 IR DHD 380 shank reduces contact stresses and wear rates. CFM 2500 2000 1500 1000 500 0 100 150 200 250 300 350 400 450 500 Figures are based on theoretical data PSI 12

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19 Hammer Overview Hammer Type Superior 800 Part Number 600432 Shank Ingersoll Rand DHD 380 Top Thread 4. 1/2 Api Reg Pin Flat Hammer Size 156mm (6.142 ) Weight 177 Kg Outside Diameter 182mm (7.165 ) Make Up Length 1263mm (49.724 ) Recommended Minimum Thrust 800kg (1760 Lbs) Recommended Maximum Thrust 2000kg (4400 Lbs) Parts List Hammer Type Superior 800 Shank DHD 380 SK25 RK64 Model Number 600432 Contents Item Description Part Number Quantities 1 Thread Protector 207295 - - 2 Snap Ring 783034 2 2 3 N.R.V. Seat 602887-1 4 O Ring 768150 2 2 5 Non Return Valve 602285-1 6 N.R.V. Cover 603696-1 7 N.R.V. Spring 760108 2 2 8 Top-Adaptor 603498 - - 9 Spacer 603576 1 1 10 O Ring 768103 2 2 11 O Ring 768145 2 2 12 Cylinder 603496 - - 13 Piston 602743 - - 14 Snap Ring 783015 2 2 15 Spacer 602840-1 16 Containment Band 603549 - - 17 Bit Ring 603043-1 18 Chuck Spacer 603576 1 1 19 Chuck 603495-1 20 End Cap 741027 - - SK Service Kit SK25 RK Repair Kit RK64 Drill Bits Foot Valve 601819 F/V Tool - Body 601820 F/V Tool - Pusher 601569 Part Diameter Face Buttons Over Weight Number mm Inch Design Type Qty Size (Kg) Ingersoll Rand Shank - DHD 380 650977 200 7.7/8 Concave Domed 31 x 16mm 52.0 650373 203 8 Concave Domed 10 x 20mm / 14 x 16mm 51.5 650022 241 9.1/2 Concave Domed 10 x 16 / 18 x 20mm 56.9 650389 254 10 Concave Domed 18 x 20mm / 10x16mm 64.5 650898 300 11.7/8 Convex Domed 34 x 20mm Y 84.5 653041 311 12.1/4 Concave Domed 42 x 20mm Y 84.1 Your Drilling Expert 13

8 SUPERIOR 850 AT A GLANCE SIZE 222-270mm (8 3/4-10 5/8") SHANK IR QL 80 AIR PRESSURE 100-435 psi (7-30 bar) One piece top-adaptor reduces internal parts. No make up required. External N.R.V. for easy maintenance. Revised chamber volumes and cycle timing to optimize performance. Simplified piston geometry for improved balance and location within the cylinder. Reversible cylinder. SUPERIOR 850 The Superior 850 has been designed for high performance drilling in hard to medium rock formations, particularly mining applications. Its class leading performance has been achieved with a larger/heavier piston and a valveless air cycle providing a 50% increase in stroke. As well as a reversible cylinder for prolonged hammer life, the Superior 850 benefits from a QL80 shank design. The one piece top-adaptor with N.R.V. (Non-Return-Valve) makes it easy to maintain and service the hammer. This hammer has few internal parts which makes on site servicing easy with minimum tools needed. Suitable for operation at air pressures of 100-435 psi (7-30 bar). Drilling diameters of 222-270mm (8 3/4-10 5/8 ). Available Shanks IR QL 80 Air Consumption IR QL80 shank reduces contact stresses and wear rates. 2500 2000 CFM 1500 1000 500 0 100 150 200 250 300 350 400 450 500 Figures are based on theoretical data PSI 14

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Hammer Overview Hammer Type Superior 850 Part Number 600433 Shank Ingersoll Rand QL 80 Top Thread 4. 1/2 Api Reg Pin Flat Hammer Size 125mm (4.921 ) Weight 210 Kg Outside Diameter 192mm (7.559 ) Make Up Length 1281mm (50.433 ) Recommended Minimum Thrust 800kg (1760 Lbs) Recommended Maximum Thrust 2000kg (4400 Lbs) Parts List Hammer Type Superior 850 Shank QL80 SK32 RK55 Model Number 600433 Contents Item Description Part Number Quantities 1 Thread Protector 207295 - - 2 Snap Ring 783034 2 2 3 N.R.V. Seat 602887-1 4 O Ring 768150 2 2 5 N.R.V. 602285-1 6 N.R.V. Cover 603696-1 7 N.R.V. Spring 760108 2 2 8 Top-Adaptor 603353 - - 9 Spacer 603358 1 1 10 O Ring 768169 2 2 11 Piston 603349 - - 12 Cylinder 603765 - - 13 Snap Ring 783039 2 2 14 O Ring 768169 2 2 15 Bit Guide Bush 603767-1 16 Bit Ring 603359-1 17 Chuck Spacer 603358 1 1 18 Chuck 603357-1 19 End Cap 741027 - - SK Service Kit SK32 RK Repair Kit RK55 Drill Bits Foot Valve 603334 Body 603342 Pusher 603341 Part Diameter Face Buttons Over Weight Number mm Inch Design Type Qty Size (Kg) Ingersoll Rand Shank - QL 80 653062 222 8.3/4 Concave Domed 14 x 18mm / 10 x 18mm Long 56.8 653239 254 10 Concave Domed 34x18mm / 12x13mm Retracks 64 653254 270 10.5/8 Concave Domed 42x18mm / 12x13mm Retracks 69.5 653263 270 10.5/8 Concave Parabolic 42x18mm / 12x13mm Retracks 69.5 21 Your Drilling Expert 15

10 SUPERIOR 1000 AT A GLANCE SIZE 254-381mm (10-15 ) SHANK SD 10 AIR PRESSURE 100-435 psi (7-30 bar) One piece top-adaptor reduces internal parts. No make up required. External N.R.V. for easy maintenance. Simplified piston geometry for improved balance and location within the cylinder. SUPERIOR 1000 The Superior 1000 incorporates a unique piston design for high performance and reliability especially in waterwell applications. This hammer is suitable for a wide range of air pressures. Its optimum performance is reached at air pressures of 200psi (14 bar) and above. The Superior 1000 has a body diameter of 230mm and piston weight of 87.6kg, one of the heaviest in its class providing excellent performance. A reversible cylinder is fitted to the hammer to prolong its life and reduce cost. The Captive bit retaining rings and an improved thread design ensures that the Superior 1000 is simple to service with a few tools. Suitable for operation at air pressures of 100-435 psi (7-30 bar). Drilling diameters of 254-381mm (10-15"). Live air bleed to adjust volume. Reversible cylinder. Available Shanks Sandvik Mission SD10 4000 Air Consumption 3500 Revised chamber volumes and cycle timing to optimize performance. CFM 3000 2500 2000 1500 1000 Sandvik Mission SD10 shank reduces contact stresses and wear rates. 500 0 100 150 200 250 300 350 400 450 500 PSI Bleed Plug Blank Blue Bleed Plug 3mm Pink Bleed Plug 4mm Yellow Bleed Plug 5mm Turquoise Bleed Plug 6mm Purple Bleed Plug 8mm Brown No Bleed Plug Figures are based on theoretical data 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Hammer Overview Hammer Type Superior 1000 Part Number 600434 Shank Sandvik Mission SD10 Top Thread 6.5/8 Api Reg Pin Flat Hammer Size 200mm (7.874 ) Weight 367 Kg Outside Diameter 230mm (9.055 ) Make Up Length 1390mm (54.724 ) Recommended Minimum Thrust 1500 Kg (3400 Lbs) Recommended Maximum Thrust 3500 Kg (7700 Lbs) Parts List Hammer Type Superior 1000 Shank SD10 SK29 RK50 Model Number 600434 Contents Item Description Part Number Quantities 1 Lifting Cap 602354 - - 2 Circlip 777001 2 2 3 N.R.V. Seat 602286-1 4 O Ring 768133 2 2 5 NR Valve 602288-1 6 N.r.v. Spring 760055 2 2 7 Adaptor Assy 603429 - - 8 Top-Adaptor Spacer 603432 1 1 9 O Ring 768172 2 2 10 O Ring 768172 2 2 11* Bleed Plug Blank Blue 602499 - - Bleed Plug 3mm Pink 602500 - - Bleed Plug 4mm Yellow 602501 - - Bleed Plug 5mm Turquoise 602502 - - Bleed Plug 6mm Purple 602503 - - Bleed Plug 8mm Brown 602874 - - 12 Cylinder 603434 - - 13 Piston 603433 - - 14 Snap Ring 783040 2 2 15 Bit Retaining Ring 603435-1 16 Chuck Spacer 603432 1 1 17 Chuck 603436-1 18 Cap 741049 - - SK Service Kit SK29 RK Repair Kit RK50 Drill Bits Foot Valve 603186 F/V Tool - Body 603188 F/V Tool - Pusher 603187 Part Diameter Face Buttons Over Weight Number mm Inch Design Type Qty Size (Kg) Sandvik Mission SD10 Shank 650648 254 10 Concave Domed 11 x 16mm / 18 x 20mm 84.7 650644 280 11 Concave Domed 34 x 18mm 97.0 650650 305 12 Concave Domed 34 x 20mm Y 96.4 650071 311 12.1/4 Concave Domed 46 x 20mm Y 107.0 650072 381 15 Concave Domed 65 x 20mm Y 146.0 Your Drilling Expert 17

12 SUPERIOR 1200 AT A GLANCE SIZE 381-489mm (15-19 1/4") SHANK IR DHD 112 AIR PRESSURE 100-435 psi (7-30 bar) One piece top-adaptor reduces internal parts. No make up required. External N.R.V. for easy maintenance. Simplified piston geometry for improved balance and location within the cylinder. SUPERIOR 1200 The Superior 1200 hammer accepts IR DHD112 shank bits. The Superior 1200 has a pin drive system to prevent metal to metal contact thereby minimizing spline wear and damage which can result in drill bit shank failure. Superior 1200 has a one piece top-adaptor with N.R.V. (Non-Return-Valve) fitted for easy inspection and service, with integral finger to reduce maintenance and eliminate shimming which increases service intervals. Servicing requires only a few simple tools. The Superior 1200 has no liner which increases the 140 kg piston blow energy and reduces parts required. This hammer is suitable for use with overburden systems. Suitable for operation at air pressures of 100-435 psi (7-30 bar). Drilling diameters of 381-489 mm (15-19 1/4"). Available Shanks IR DHD 112 Revised chamber volumes and cycle timing to optimize performance. 4000 Air Consumption 3500 3000 2500 IR DHD 112 shank with drive pins reduces contact stresses and wear rates. CFM 2000 1500 1000 500 0 100 150 200 250 300 350 400 450 500 PSI Figures are based on theoretical data 18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 18 Hammer Overview Hammer Type Superior 1200 Part Number 600435 Shank Ingersoll Rand DHD 112 Top Thread 6.5/8 Api Reg Pin Flat Hammer Size N/A Weight 614 Kg Outside Diameter 273mm (10.748 ) Make Up Length 1684mm (66.299 ) Recommended Minimum Thrust 1600 Kg (3520 Lbs) Recommended Maximum Thrust 3500 Kg (7700 Lbs) Parts List Hammer Type Superior 1200 Shank DHD112 SK14 RK23 Model Number 600435 Contents Item Description Part Number Quantities 1 Lifting Cap 602354 - - 2 Circlip 777001 2 2 3 O Ring 768133 2 2 4 N.R.V. Seat 602286-1 5 Non Return Valve 602288-1 6 N.R.V. Spring 760055 2 2 7 Top-Adaptor 602639 - - 8 O Ring 768137 2 2 9 O Ring 768137 2 2 10 Top-Adaptor Spacer 602366 1 1 11 Cylinder 602563 - - 12 Piston 602532 - - 13 Snap Ring 783021 2 2 14 Bearing Bush 602531-1 15 O Ring 768184 2 2 16 Containment Band 603819 4 4 17 Bit Retaining Ring 602530-1 18 Chuck Spacer 602366 1 1 19 Drive Pins 600564 2 2 20 Chuck 602528-1 21 End Cap 741035 - - SK Service Kit SK14 RK Repair Kit RK23 Drill Bits Foot Valve 602522 F/V Tool - Body 602523 F/V Tool - Pusher 601813 Part Diameter Face Buttons Over Weight Number mm Inch Design Type Qty Size (Kg) Mach 132 / DHD 112 Shank 650946 381 15 Concave Domed 62 x 20mm / 30 x 16mm Wear 217 650942 444 17.1/2 Concave Domed 82 x 20mm / 30 x 16mm Wear Y 271 650943 476 18.3/4 Concave Domed 82 x 20mm / 30 x 16mm Wear Y 291 650646 489 19.1/4 Concave Domed 82 x 20mm / 30 x 16mm Wear Y 300 18 Your Drilling Expert 19

12 Superior 1250 AT A GLANCE SIZE 438-660mm (17 1/4-26") SHANK IR DHD 112S AIR PRESSURE 100-350 psi (7-24 bar) One piece top-adaptor reduces internal parts. No make up required. External N.R.V. for easy maintenance. Revised chamber volumes and cycle timing to optimize performance. Simplified piston geometry for improved balance and location within the cylinder. Superior 1250 The Superior 1250 hammer accepts IR DHD112S shank bits and is equipped with an oversized chuck to accomodate this shank. This oversize chuck protects the cylinder and prolongs its life. This hammer has a pin drive arrangement to prevent metal to metal contact thereby minimising spline wear and damage which can result in drill bit shank failure. The Superior 1250 has a one piece top-adaptor with N.R.V. (Non-Return-Valve) fitted for easy inspection and service, with integral finger to reduce maintenance and eliminate shimming which increases service intervals. Suitable for operation at air pressures of 100-350 psi (7-24 bar). Drilling diameters of 438-660mm (17 1/4-26"). Available Shanks IR DHD 112S IR DHD 112S shank with drive pins reduces contact stresses and wear rates. 4000 Air Consumption 3500 3000 2500 CFM 2000 1500 1000 500 0 100 150 200 250 300 350 400 450 500 Figures are based on theoretical data PSI 20

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 18 Hammer Overview Hammer Type Superior 1250 Part Number 600436 Shank Ingersoll Rand DHD 112S Top Thread 6.5/8 Api Reg Pin Flat Hammer Size N/A Weight 688 Kg Outside Diameter 273mm (10.748 ) Make Up Length 1819mm (71.614 ) Recommended Minimum Thrust 1600 Kg (3520 Lbs) Recommended Maximum Thrust 3500 Kg (7700 Lbs) Parts List Hammer Type Superior 1250 Shank DHD112S SK15 RK24 Model Number 600436 Contents Item Description Part Number Quantities 1 Lifting Cap 602354 - - 2 Circlip 777001 2 2 3 O Ring 768133 2 2 4 N.R.V. Seat 602286-1 5 Non Return Valve 602288-1 6 N.R.V. Spring 760055 2 2 7 Top-Adaptor 602639 - - 8 O Ring 768137 2 2 9 O Ring 768137 2 2 10 Top-Adaptor Spacer 602366 1 1 11 Cylinder 602563 - - 12 Piston 602532 - - 13 Snap Ring 783021 2 2 14 Bearing Bush 602531-1 15 O Ring 768184 2 2 16 Containment Band 603819 4 4 17 Bit Retaining Ring 602530-1 18 Chuck Spacer 602985 1 1 19 Drive Pins 600565 2 2 20 Chuck 602529-1 21 End Cap 741037 - - SK Service Kit SK15 RK Repair Kit RK24 Drill Bits Foot Valve 602522 F/V Tool - Body 602523 F/V Tool - Pusher 601813 Part Diameter Face Buttons Over Weight Number mm Inch Design Type Qty Size (Kg) Mach 142/DHD 112S Shank 650018 438 17.1/4 Concave Domed 82 x 20mm / 18 x 16mm Wear Y 354 650964 508 20 Concave Domed 91 x 20mm / 36 x 16mm Wear Y 470 650907 610 24 Concave Domed 123 x 20mm / 66 x 16mm Wear Y 512 653126 660 26 Convex Domed 171 x 20mm / 39 x 16mm Wear Y 600 18 Your Drilling Expert 21

AIR CONSUMPTION 3600 3400 3200 3000 2800 2600 2400 2200 2000 1800 1600 1400 Air Consumption (CFM) 1200 1000 800 600 400 200 0 100 150 200 250 300 350 400 450 500 Air Pressure (PSI) DOM 10 DOM 20 DOM 30 MACH 44 GP 400 MACH 50 GP 500 MACH 60 GP 600 DOM 750 DOM 800 DOM 850 DOM 880 DW DOM 1000 MACH 122 22

CONVERSION TABLE Air Volume Example 1 cc =.001 litre 1000 cc = 1 litre 1 litre =.001 m3 1000 litres = 1 m3 Air Flow Example 1 cfm = 0.0283 m3/min 100 cfm = 2.83 m3/min 1 cfm = 0.4719 litre/sec 100 cfm = 47.19 litre/sec 1 m3/min = 35.315 cfm 10 m3/min = 353.15 cfm 1 m3/min = 16.667 litre/sec 10 m3/min = 166.67 litre/sec 1 litre/sec = 2.1189 cfm 100 litre/sec = 211.89 cfm 1 litre/sec = 0.0600 m3/min 100 litre/sec = 6.00 m3/min Air Pressure Example 1 psi = 0.0689 bar 100 psi = 6.89 bar 1 psi = 0.0703 kg/cm2 100 psi = 7.03 kg/cm2 1 psi = 0.0680 atm (Atmosphere) 100 psi = 6.80 atm 1 bar = 14.504 psi 10 bar = 145.04 psi 1 bar = 1.0197 kg/cm2 10 bar = 10.197 kg/cm2 1 bar = 0.9869 atm 10 bar = 9.869 atm 1 atm = 14.696 psi 10 atm = 146.96 psi 1 atm = 1.0132 bar 10 atm = 10.132 bar 1 atm = 1.0332 kg/cm2 10 atm = 10.332 kg/cm2 Velocity Example 1 m/min = 3.2808 ft/min 1000 m/min = 3280.80 ft/min 1 m/min = 0.0167 m/sec 1000 m/min = 16.70 m/sec 1 ft/min= 0.3048 m/min 1000 ft/min = 304.80 m/min 1 ft/min = 0.0051 m/sec 1000 ft/min = 5.10 m/sec 1 m/sec = 60.00 m/min 10 m/sec = 600 m/min 1 m/sec = 196.85 ft/min 10 m/sec = 1968.50 ft/min Torque Example 1 lbft = 0.1383 kgm 1000 lbft = 138.30 kgm 1 lbft = 1.3558 Nm 1000 lbft = 1355.80 Nm 1 lbft = 12.00 lbin 1000 lbft = 12000 lbin 1 kgm = 7.233 lbft 100 kgm = 723.30 lbft 1 kgm = 9.8067 Nm 100 kgm = 980.67 Nm 1 kgm = 86.796 lbin 100 kgm = 8679.60 lbin 1 lbin = 0.0833 lbft 1000 lbin = 83.30 lbft 1 lbin = 0.0115 kgm 1000 lbin = 11.50 kgm 1 lbin = 0.1130 Nm 1000 lbin = 113 Nm Your Drilling Expert 23

www.halcorocktools.com United Kingdom Halco Rock Tools Ltd Armytage Road Brighouse West Yorkshire HD6 1QF Tel: +44 (0)1422 399900 E mail: salesuk@halcorocktools.com USA Halco America LLC 2720 Fallon Drive Sherman TX 75090 Tel: +1 903-893-2300 E mail: salesusa@halcorocktools.com Australia Halco Australia Dillington Pass Landsdale WA 6065 Tel: +61 8 9303 9506 E mail: salesaus@halcorocktools.com South Africa Halco South Africa 21 Harriet Ave Driehoek Germiston 1459 Shop No4 Johannesburg E mail: salesafrica@halcorocktools.com REF 101. 2014