INSTLLTION INSTRUCTIONS FOR PRT 95-3305 PPLICTIONS CHEVROLET Express Van 2008 Impala 2006-08 Tahoe 2007-08 valanche 2007-08 Monte Carlo 2006-07 Silverado 2007-08 with SLT Suburban 2007-08 GMC Yukon 2007-08 Sierra 2007-08 with SLT Savanna 2008 95-3305 KIT FETURES Double DIN Radio Provision Stacked ISO Units Provision UICK Lucerne 2006-08 SUZUKI XL7 2007-08 KIT COMPONENTS ) Double DIN Trim Plate ) Double DIN rackets TOOLS REQUIRED: Small Flat lade Screwdriver Panel Removal Tool Phillips Screwdriver Socket Set Torx Driver llen Wrench 1-800-221-0932 www.metraonline.com COPYRIGHT 2004-2007 METR ELECTRONICS CORPORTION
95-3305 TLE OF CONTENTS Dash Disassembly - Chevrolet Impala 2006-2008...1 - Chevrolet Monte Carlo 2006-2007...................................1 - uick Lucerne 2006-2008... 1 - Chevrolet valanche 2007-08...2 - Chevrolet Silverado with SLT 2007-08...............................2 - Chevrolet Suburban 2007-08...2 - Chevrolet Tahoe 2007-08...2 - GMC Sierra with SLT 2007-08....2 - GMC Yukon 2007-08...2 - Chevrolet Express Van 2008/GMC Savanna 2008.... 3 - Suzuki XL-7 2007-08.....4 Kit ssembly - Double DIN Radio Provision.....5 - Stacked ISO Units Provision...5 Final ssembly.......................................... 6 *Note: Refer also to the instructions included with the aftermarket radio.
95-3305 DSH DISSSEMLY 1 UICK LUCERNE CHEVY IMPL / MONTE CRLO 2006-2008 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the trim panel around radio and a/c control. (Figure ) 3 Remove (6) 9/32 screws to extract radio and a/c control from sub dash. (Figure ) Continue to kit assembly. 1
1 95-3305 DSH DISSSEMLY SILVERDO WITH SLT OPTION/SUURN CHEVY VLNCHE/THOE GMC YUKON/SIERR WITH SLT OPTION 2007-08 *Note: Refer also to the instructions included with the aftermarket radio. Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove radio trim panel. (Figure ) 3 4 Remove (2) 8mm screws securing switch panel below climate controls. Unplug and remove switch panel. (Figure ) Remove (2) 8mm screws securing climate controls. Unplug and remove climate controls. (Figure ) 5 Remove (4) 9/32 screws securing radio. Unplug and remove the radio. (Figure C) Continue to kit assembly. C 2
95-3305 DSH DISSSEMLY CHEVY EXPRESS VN 2008/GMC SVNN 2008 *Note: Refer also to the instructions included with the aftermarket radio. 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (2)10mm bolts from below knee bolster under steering column and remove panel. 3 Remove (2)10mm bolts from panel below passenger dash airbag and remove panel. 4 Unsnap and remove radio and instrument cluster panel. (May not be necessary to completely remove radio and instrument cluster panel to access radio.) 5 Remove (4) 9/32 bolts to remove radio. Continue to kit assembly. 3
1 2 95-3305 DSH DISSSEMLY SUZUKI XL-7 2007-08 *Note: Refer also to the instructions included with the aftermarket radio. Disconnect the negative battery terminal to prevent an accidental short circuit. Press in on sides of the shifter boot to release it from the shifter trim panel. (Figure ) 3 Lift the boot up to access the llen screw securing the shifter knob to the shifter lever. Loosen the llen screw and remove the shifter knob. (Figure ) 4 5 6 Remove (1) torx screw from the shifter trim panel (Figure C), then using a panel removal tool unsnap the shifter trim panel. Unplug and remove the panel. (Figure D) Using a panel removal tool unsnap the radio trim panel. Unplug and remove the panel. (Figure E) Remove (4) 9/32 screws securing the radio. Unplug and remove the radio. Continue to kit assembly. E C D 103:5 12:02 4
95-3305 KIT SSEMLY DOULE DIN RDIO PROVISION *Note: Refer also to the instructions included with the aftermarket radio. NOTE: XL-7 ONLY Trim top corners of radio housing. (Figure ) 1 Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure ) 2 Slide the DDIN radio unit into the trim plate bracket assembly and secure the unit to the kit using the screws supplied with the head unit. (Figure C) STCKED ISO UNITS PROVISION NOTE: XL-7 ONLY Trim top corners of radio housing. (Figure ) C 1 2 Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure ) Slide the stacked ISO DIN units into the trim plate bracket assembly and secure the units to the kit using the screws supplied with the head units. (Figure C) Continue to final assembly. 5 C
95-3305 FINL SSEMLY FINL SSEMLY C () Strip wire ends back 1/2" ) Twist ends together C) Solder D) Tape D 1 2 3 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) Re-connect the negative battery terminal and test the unit for proper operation. Reassemble radio and dash assemblies in reverse order of disassembly. FINL WIRING CONNECTIONS Make wiring connections using the EI color code chart shown below and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electrical short circuit. METR / EI WIRING CODE 12V Ignition / cc.......... Red 12V att / Memory......... Yellow Ground.................. lack* Power ntenna............ lue mp Turn-On............. lue / White mp Ground.............. lack / White Illumination.............. Orange Dimmer................. Orange / White Right Front (+)............ Gray Right Front (-)............. Gray/ lack Left Front (+)............. White Left Front (-).............. White / lack Right Rear (+)............ Violet Right Rear (-)............. Violet / lack Left Rear (+)............. Green Left Rear (-).............. Green / lack *NOTE: When a lack wire is not present, ground radio to vehicle chassis. ll colors may not be present on all leads due to manufacturer s specifications. 6
95-3305 NOTES 7
95-3305 NOTES 8
95-3305 NOTES 9
95-3305 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 10/10/07 COPYRIGHT 2004-2007 METR ELECTRONICS CORPORTION INST95-3305