Electric Immersion Pumps PT sealless 1 6017 EN 1 6017 US Peripheral impeller pumps of high tech plastic for clean fluids Technical data Delivery rate Q max = 23 l/min Delivery head H max = 35 m Temperature range 60 C to +120 C Product features Centrifugal pump, 1 stage Peripheral impeller Port dimensions to DIN EN 12157 Immersion depths of up to 270 mm Light weight and compact design Three phase or single phase motor Quality Management DIN EN ISO 9001: 2008 Environmental Management DIN EN ISO 14001 www.spandaupumpen.com
Im Folgenden finden Sie Informationen zu einem Teil unseres Leistungs- und Serviceportfolios. Sollten Sie hierzu oder zu anderen Produkten Fragen haben, treten Sie jederzeit gern in Kontakt mit uns: Tel: 0800 770 90 90 (kostenfrei) info@vogel- gruppe.de Parker Store Komponenten 3D- Rohrbiege- Service Wartung und Service Hydraulik & Pneumatik Aggregate- und Anlagenbau Mobiler Tag- und Nacht vor- Ort- Service Druckluft- Service Schmiertechnik Hauptsitz Senftenberg Laugkfeld 21, 01968 Senftenberg Tel: 03573 14 80-0 Bereitschaft: 0160 718 15 82 E- Mail: senftenberg@vogel- gruppe.de Niederlassung Dresden Niedersedlitzer Str. 75. 01257 Dresden Tel: 0351 28 78 825 Bereitschaft: 0160 71 81 584 E- Mail: dresden@vogel- gruppe.de Niederlassung Frankfurt/Oder Wildbahn 8, 15236 Frankfurt/Oder Tel: 0335 52 15 081 Bereitschaft: 0160 71 81 584 E- Mail: frankfurt@vogel- gruppe.de Niederlassung Genshagen & Rohrbiegezentrum Seestr. 20, 14974 Genshagen Tel: 03378 87 90 67 Bereitschaft: 0171 22 65 930 E- Mail: genshagen@vogel- gruppe.de Vertriebsgebiet Leipzig Tel.: +49 160 7181581. E- Mail: leipzig@vogel- gruppe.de Niederlassung Schöneiche August- Borsig- Ring 15, 15566 Schöneiche Tel: 030 6501 380-0 Bereitschaft: 0160 71 81 590 E- Mail: schoeneiche@vogel- gruppe.de Industrie- Hydraulik Vogel & Partner GmbH. Laugkfeld 21. 01968 Senftenberg, Tel.: 03573 1480-0 info@vogel- gruppe.de. www.vogel- gruppe.de
Immersion Pumps PT, sealless 1 6017 EN 2 Main applications Air conditioning Beverage filling installations Cleaning/degreasing installations Cooling systems Laboratory equipment Laser technology Machine tools Medical equipment Tempering installations Welding systems Wetting facilities etc. Fluids clean liquids Water, also distilled or deionized; saltwater Emulsions (synthetic/containing mineral oil), also with chemical additives Oils Heat transfer oils Photo developers Cooling brines Weak bases and acids etc. Temperature range: 60 C to +120 C. Ambient temperature: max. 40 C (others on request). Kinematic viscosity: up to 50 mm 2 /s without reduction of Q max (higher viscosities on request). Product advantages High dependability and a long service life thanks to the combined use of PEI and stainless steel, two high quality materials, and due to the fact that wearing parts have been dispensed with (sealless design). Constant, stable hydraulic performance throughout the entire temperature range due to a floating impeller. Special delivery characteristics due to peripheral impeller. Good handling thanks to low weight (approx. 4 kg). Small amount of space required thanks to compact design. Broad temperature range from 60 C to +120 C. Can be used in laboratories since it is very quiet. Design features Sealless Peripheral impeller 1 stage model Installation and port dimensions to DIN EN 12157 Immersion depths 130, 170, 270 mm PEI a high tech top grade plastic All the pump's parts are made of glass reinforced PEI (trade name: ULTEM ). The amorphous thermoplastic polyetherimide has outstanding thermal and mechanical properties. The high thermostability of this material ensures great fatigue strength of the pump's parts, even at high operating temperatures. Another unusual property is its extensive resistance to the long term effects of chemicals throughout a broad range of temperatures. PEI is physiologically safe, recyclable and reusable. Mechanical design Component Material Motor housing Aluminum Pump port Pump bottom Impeller Shaft Stainless steel 1.4122 Rolling bearings Radial deep groove ball bearings with a sealing wash er and high tempera ture grease Rotary shaft lip type seal FPM (under lower ball bearing) Guide bush Teflon/graphite Small parts Stainless steel (in contact with the fluid) Electrical design The drive motors meet VDE regulations as well as European motor standards (DIN EN 60034 1/11.95) while also satisfying the require ments for a CE mark. Designs in conformity with non European regulations, e.g. Cana dian Standards Association (CSA), Underwriters Laboratories INC. (UL) or special requirements, e.g. the USA or Japan, are possible. Moreover, we also produce models for special operating conditions (e.g. exposure to high humidity or dust). The regular models have motor windings designed for continuous operation and connection to a mains voltage of 230/400 V, ±10%, 50 Hz in accordance with IEC 38/5.87. The motors can be adapted to all customary mains values on request. Standard Optional Type of enclosure IP 54 IP 55 (DIN EN 60034 5/4.88) Insulation class F.B F Ambient temperature max. 40 C 50 C and higher (DIN EN 60034 1/11.95) Relative humidity max. 92 % 95% and higher (DIN 50015) Site altitude < 1000 m on request (DIN EN 60034 1/11.95) above sea level Mains power 230/400 V, 50 Hz on request 255/440 V, 60 Hz Mains operation three phase single phase AC current Number of poles 2 poles 4 poles Terminal box layout layout 1 layout 2, 3 or 4 (DIN EN 12157) material high impact light weight metal plastic cable entry M 16x1.5 M 25x1.5 (DIN 40430/2.71) M 20x1.5 Protective surface synthetic resin special coatings coating lacquer, available on color: RAL 9005 request (deep black, dull) Special protection integrated thermistor type motor protection: fan cowl with canopy
Immersion Pumps PT, sealless 1 6017 EN 3 Installation and operation The unit is installed in a vertical position. The maximum permissible level of fluid amounts to 20 mm beneath the mounting flange. The fluid must always be higher than the pump chamber when the pump is turned on (cf. following drawing). Dry running is not permitted. Before startup, fill the pump with fluid for pumping.there is only limited support for short-term operation without such fluid during the feeding operation. Direction of rotation: to the right (clockwise), as viewed from above looking down on the ventilation side of the motor. Order Example Model Single phase AC current Size Immersion depth t PT 35 170 PT E 35 170 Characteristic for 50 or 60 Hz (with impeller change) number (see motor rating plate). H [ft] H [m] Please indicate mains power, e.g. 230/400 V, 50 Hz. When ordering spare parts, always indicate the 6 place serial (in the case of CSA and US models or if equipped with thermistor type protection) Q [l/min] 188 (if equipped with canopy) The data apply to fluids with a viscosity of ~1 mm 2 /s at a density of ~1 kg/dm 3 Q [Imp.gpm] Q [USgpm] Electrical values maximum permissible level of fluid Three phase operation Rated Rated Rated Rated Rated Noise power voltage frequency current speed level *) / Y / Y Model [kw] [V] [Hz] [A] [rpm] [db (A)] PT35 0.35 230 / 400 50 1.38 / 0.80 2750 255 / 440 60 1.30 / 0.75 3433 62 **) Single phase operation *) to DIN EN 60034 9/5.96 **) at H = 15 m minimum level of fluid when pump turned on Rated Rated Rated Rated Rated power voltage frequency current speed BC Model [kw] [V] [Hz] [A] [rpm] [µf] PTE35 0.36 230 50 2795 8 1.90 255 60 3330 6 flange Standard ventilated motors come without a canopy. If necessary observe the respective safety regulations and laws applying to machinery guards, the motors can be supplied with a canopy at extra charge. Weight, approx. 4 kg Please note: All equipment may only be installed and/or assembled by qualified personnel. Observe existing safety regulations. To avoid errors please consult our operating instructions.
1 Stator housing with winding 15 Screw 2 Gasket 16 Bush 5 Screw 17 Port 7 Terminal box 18 Divider 8 Fan cowl 19 Bolt 9 Fan impeller 20 O ring 10 Rotor 21 Impeller 11 Shaft 22 Bottom 12 Radial deep groove bearing DIN 625 25 Nut 13 Radial deep groove bearing DIN 625 26 Spring washer 14 Shaft seal 27 Bolt SKF Lubrication Systems Germany GmbH Product department Spandau Pumps Motzener Strasse 35/37 12277 Berlin Germany PF 970444 12704 Berlin Germany Tel. +49 (0)30 72002 0 Fax +49 (0)30 72002 261 www.spandaupumpen.com This brochure was presented by: 1-6017-EN Subject to change without notice. 06/2015