CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating Cup Packing uses flexible graphite for dependable sealing performance. If requested by users, packing spacers ring and greasing mechanism can be available. Also other types of packing or live loading. Upper seal design to ensure dependable packing and sealing when valve is fully opened.(replacement of packing under pressure is not recommended. Stem Yoke Eyebolt Nut Eyebolt Gland Flange Gland Pin Bonnet Packing Back Seat Bonnet Bolt Bonnet Nut Gasket Lift Shem, with stem and disc connected by T-slot and stem T head integrally forged to ensure sufficient strength of joint. Seat Wedge Body 001
CAST STEEL GATE VALVE TYPICAL MATERIAL LIST FOR API00 CAST STEEL GATE VALVE No. Part Name Carbon Steel Stainless Steel Alloy Steel 1 Body ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC Wedge ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC Seat ASTM A10 ASTM A1 F1 - ASTM A1 F0 Gasket Soft Graphite+SS0 Nut ASTM A19 H ASTM A19 B ASTM A19 B ASTM A19 Stud ASTM A19 B7 ASTM A19 ASTM A19 ASTM A19 B7 7 Back Seat ASTM A1 Fa ASTM A1 F1 ASTM A1 F1 ASTM A1 F0 Packing Soft Graphite 9 Bonnet ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC 10 Pin ASTM A19 H ASTM A7 TYPE0 ASTM A7 TYPE0 ASTM A7 TYPE10 11 Gland ASTM A1 Fa ASTM A1 F1 ASTM A1 F0 ASTM A1 Fa 1 Gland Flange ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A1 WCB 1 Eyebolt ASTM A19 B7 ASTM A19 B ASTM A19 B ASTM A19 B7 1 Eyebolt Nut ASTM A19 H ASTM A19 ASTM A19 ASTM A19 1 Yoke ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A1 WCB 1 Stem ASTM A7 WCB ASTM A7 TYPE0 ASTM A7 TYPE1 ASTM A1 F 17 Lubricating Cup COPPER ALLOY 1 Stem Nut ASTM B1UNS C900 ASTM B1UNS C900 ASTM B1UNS C900 ASTM B1UNS C900 19 Stem Nut Retainer ASTM A10 100 ASTM A1 F0 ASTM A1 F0 ASTM A10 100 0 Handwheel ASTM A197 ASTM A197 ASTM A197 ASTM A197 1 Handwheel Nut ASTM A10 100 ASTM A1 F0 ASTM A1 F0 ASTM A10 100 Remarks: 1. Pressure and temperature rating of casing material referred to Appendix. Chemical compositions and mechanical property of casing material reffered to Appendix. Trim materials and recommended service coverage reffered to Appendix. NACE MR-01-7 when specified by user Stellite overlay available API00 API0 Pressure-Temperature Rating ASME B1. Face-Face ASME B1.10 Flange Ends ASME B1. / ASTM B1.7 Buttwelding Ends ASME B1. Inspection and Test API9 Nominal Pressure (Class) 10 00 00 00 900 100 00 Shell Test.9 7. 10.0 1.0. 7..0 Test-Pressure (MPa) High Pressure Seal Test.07. 7.1 11.0 1. 7..0 Low Pressure Seal Test 0. Applicable Temperature Applicable Medium Different raw material for different work temperature Water, Oil, Gas and other causticity medium (Different raw material for different medium 00
API CAST STEEL GATE VALVE API CAST STEEL GATE VALVE PRODUCT LINE Size DN NPS 0 1-1/ 0-1/ 0 100 1 10 00 0 10 00 1 0 1 00 1 0 1 00 0 00 0 700 70 0 00 900 1000 0 100 100 Hand operated Bolted Bonnet 10 00 00 900 100 00 00 900 100 00 900 100 00 00 900 100 00 Pressure (CLASS) Pressure Seal Bonnet Gear operated Hand operated Gear operated For sizes classes not shown please contact our sales department 1 10 WCB L9 0 00 WCB L Handwheel Operate Gear Operate 00
CAST STEEL GATE VALVE ANSI 10Lb Bearing and injection For NPS " and larger Handwheel operation Gear operation for 1" and larger Yoke for NPS 10" and larger 1. Design and Manufacture Standard: API 00, API 0. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard: ANSI B1.(NPS<="), ASME B1.7(NPS>"). Inspection and Test Standard: API 9 NPS L d Hw Hg Dw Dg Weight(Kg) inch mm RF RTJ BW H.W. G.O. 0 17 191 1 1 00-00 - 19 - -1/ 191 0 1-00 - - 0 0 1 7 1-0 - - 100 9 1 0 10 9-0 - 9-1 7 1 17 7-0 - - 10 7 79 0 1 70 0 00 10 77 10 00 9 0 19 0 97 100 0 10 1 10 10 0 0 7 110 100 00 10 1 1 1 00 0 0 10 10 0 10 1 1 0 1 9 7 7 1 10 00 10 1 00 0 19 10 7 17 170 00 0 00 1 0 0 191 1990 00 0 01 0 00 7 70 711 9 1 0 00 0 7 1 00 0 1 1 91 0 00 00 0 1007 11 0 9 - - 00-00 - 10 700 10-91 - 00-00 - 10 0 70 10-91 7-10 - 00-00 00 711-9 779-0 - 00-0 0 7-101 0-00 - 00-90 900 711-101 7-70 - 00-90 00
API CAST STEEL GATE VALVE ANSI 00Lb Bearing and injection For NPS " and larger Handwheel operation Gear operation for 1" and larger Yoke for NPS 10" and larger 1. Design and Manufacture Standard: API 00, API 0. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard: ANSI B1.(NPS<="), ASME B1.7(NPS>"). Inspection and Test Standard: API 9 NPS L d Hw Hg Dw Dg Weight(Kg) inch mm RF RTJ BW H.W. G.O. 0 1 1 1 0-00 - - - -1/ 1 7 1-00 - 0-0 9 7 7-0 - - 100 0 1 0 10 19 0 0-7 100 1 1 97 1 17 7 70 00-99 1 10 0 19 0 1 0 0 10 10 1 00 19 19 0 1000 100 00 10 0 10 0 7 7 7 10 10 0 10 1 00 0 1 0 0 1 10 00 10 0 0 1 0 7 77 7 7 1 10 00 10 70 7 1 00 7 1790 10 00 0 9 9 1 0 91 90 91 190 000 0 0 111 1 0 00 991 1010 991 9 1 0 70 0 1 100 00 11 11 11 91 7 0 900 0 1 0 1 170 1-0 - 00-000 700 1 17 1-00 - 00-00 0 70 197 1 197 7-10 - 00-0 00 1 1 1 779-00 - 00-00 0 1 1 1 0-0 - 00-00 900 177 17 177 7-70 - 00-00 00
CAST STEEL GATE VALVE ANSI 00Lb Bearing and injection For NPS " and larger Handwheel Operation Gear operation for 10" and larger Yoke for NPS " and larger 1. Design and Manufacture Standard: API 00, API 0. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard: ANSI B1.(NPS<="), ASME B1.7(NPS>"). Inspection and Test Standard: API 9 NPS L Weight(Kg) d Hw Hg Dw Dg inch mm RF RTJ BW H.W. G.O. -1/ 0 9 9 9 1-00 - - 0 0 00-0 - - 0 9 7 0 10 0 7 100 10 9 00 10 107 1 1 0 11 0 17 70 790 0 10 17 7 10 9 9 1 900 0 10 1 00 0 0 0 107 1110 00 10 99 1 10 0 77 791 77 1 100 0 0 0 7 1 00 1 0 100 10 700 0 1 9 1 0 9 9 9 7 170 170 900 0 1177 1 1 00 991 99 991 7 1 1990 900 0 11 1 1 0 109 109 109-00 - 00-190 0 00 119 100 119 9-17 - 00-0 00 197 107 197 91 - - 00-0 00
API CAST STEEL GATE VALVE ANSI 900Lb Bearing and injection For NPS " and larger Handwheel Operation Gear operation for 10" and larger Yoke for NPS " and larger 1. Design and Manufacture Standard: API 00, API 0. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard: ANSI B1.(NPS<="), ASME B1.7(NPS>"). Inspection and Test Standard: API 9 NPS L Weight(Kg) d Hw Hg Dw Dg inch mm RF RTJ BW H.W. G.O. -1/ 0 0 71 1 00-0 - 70-19 19 0-0 - 110-1 1 7 10 0 00 10 10 17 100 7 0 7 10 70 70 0 10 00 7 1 9 9 17 0 900 00 10 10 10 1 10 1 90 100 00 0 10 00 77 70 77 0 1100 110 0 0 0 00 10 0 1 10 170 700 0 1000 1100 1 00 9 9 9 0 100 10 900 0 11 110 1 0 109 10 109 1900 190 900 00 100 1700 1 00 110 110 110 7 00 100 900 00 10 0 007
CAST STEEL GATE VALVE ANSI 100Lb 7 1 1. BODY. BONNET. SEAL RING. HALF RING. RETAINER RING. RETAINER COVER 7. YOKE Handwheel Operation Gear operation for 10" and larger Structure Feature 1. Design and Manufacture Standard: API 00, API 0. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard: ANSI B1.(NPS<="), ASME B1.7(NPS>"). Inspection and Test Standard: API 9 NPS L Weight(Kg) d Hw Hg Dw Dg inch mm RF RTJ BW H.W. G.O. -1/ 0 0 71 1 10-0 - 70-19 19 0-00 - 110-70 7 70 7 0 70 0 10 17 0 100 9 10 7 770 00 10 70 00 1 7 7 7 17 70 90 0 10 7 0 10 70 711 70 1 1000 1070 00 0 0 7 00 1 19 110 110 70 0 0 91 10 0 991 1000 991 9 10 110 900 00 10 170 1 00 110 11 110 7-10 - 00-10 1 0 17 17 17 1-00 - 00-00 1 00 1 107 1 0-10 - 00-0 00
API CAST STEEL GATE VALVE ANSI 00Lb 7 1 1. BODY. BONNET. SEAL RING. HALF RING. RETAINER RING. RETAINER COVER 7. YOKE Handwheel Operation Gear operation for 10" and larger Structure Feature 1. Design and Manufacture Standard: API 00. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard: ANSI B1.(NPS<="), ASME B1.7(NPS>"). Inspection and Test Standard: API 9 NPS L Weight(Kg) d Hw Hg Dw Dg inch mm RF RTJ BW H.W. G.O. -1/ 0 0 1 1 0 0 0 10 100 10 0 1 0 0 0 00 10 10 10 7 7 0 700 0 10 7 100 7 7 7 70 00 00 10 90 0 1 79 07 79 9 900 90 00 0 0 0 10 91 97 91 11 100 1100 00 0 70 00 10 10 10 179 110 100 70 0 10 1 10 0 170 19 170 100 10 900 00 0 1 00 1 1 1-10 - 00-0 009
CAST STEEL GLOBE VALVE DESIGN CHARACTERISTICS OF BS17 CAST STEEL GLOBE VALVE Stem nut uses aluminum bronze material. Large valve is provided with thrust bearing to make it opened easily and flexibility. Two-piece design of packing gland to avoid stem clogging caused be over pressure. Handwheel Nut Handwheel Stem Nut Eyebolt Nut Eyebolt Packing uses flexible graphite for dependable sealing performance. If requested by users, packing spacer ring and greasing mechanicm can be available. Also other types of packing or live loading. Gland Flange Gland Pin Bonnet Packing Gasket Upper seal design to ensure dependable packing and sealing when valve is fully opened.(replacement of packing under pressure is not recommended). Back Seat Bonnet Nut Bonnet Bolt Lift Stem. with a piece of hard stainless head and disc to avoid deformation caused by extrusion and corrosion leading to inflexibility of disc action. Stem Disc Seat Body 010
CAST STEEL GLOBE VALVE TYPICAL MATERIAL LIST FOR BS17 CAST STEEL GLOBE VALVE No. Part Name Carbon Steel Stainless Steel Alloy Steel 1 Body ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC Seat ASTM A10 ASTM A1 F0 - ASTM A1 F0 Disc Stem Bonnet Bolt ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC A7 TYPE 10 A7 TYPE 0 A7 TYPE 0 A1 F ASTM A19 B7 ASTM A19 ASTM A19 ASTM A19 B7 Bonnet Nut ASTM A19 H ASTM A19 B ASTM A19 B ASTM A19 7 Back Seat A1 Fa A1 F0 A1 F0 A1 F0 Gasket Soft Graphite+SS0 9 Packing 10 Bonnet Soft Graphite ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC 11 Pin A19 H A7 TYPE 0 A7 TYPE 0 A7 TYPE 10 1 Gland A1 Fa A1 F0 A1 F0 A1 Fa 1 Gland Flange 1 Eyebolt 1 Eyebolt Nut ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC ASTM A19 B7 ASTM A19 ASTM A19 ASTM A19 B7 ASTM A19 H ASTM A19 B ASTM A19 B ASTM A19 1 Stem Nut B1UNS C900 B1UNS C900 B1UNS C900 B1UNS C900 17 Handwheel 1 Handwheel Nut ASTM A197 A10 100 A1 F0 A1 F0 A10 100 Remarks: 1. Pressure and temperature rating of casing material referred to Appendix. Chemical compositions and mechanical property of casing material reffered to Appendix. Trim materials and recommended service coverage reffered to Appendix. NACE MR-01-7 when specified by user Stellite overlay available Test-Pressure (MPa) Applicable Temperature Applicable Medium BS 17 / API00 Pressure-Temperature Rating ASME B1. Face-Face ASME B1.10 Flange Ends ASME B1. / ASME B1.7 Buttwelding Ends ASME B1. Inspection and Test API9 Nominal Pressure (Class) 10 00 00 900 100 00 Shell Test High Pressure Seal Test Low Pressure Seal Test Different raw material for different work temperature.9 7. 10.0 1.0. 7..07. 7.1 11.0 1. 7. Water, Oil, Gas and other causticity medium (Different raw material for different medium 0. 011
CAST STEEL GLOBE VALVE CAST STEEL GLOBE VALVE PRODUCT LINE Size DN NPS 0 1-1/ 0-1/ 0 100 10 00 0 10 00 1 0 1 00 1 0 1 00 0 00 Hand operated Bolted Bonnet Pressure (CLASS) Pressure Seal Bonnet Gear operated Hand operated Gear operated 10 00 00 900 100 10 00 00 00 900 100 00 900 100 00 900 100 For sizes classes not shown please contact our sales department 1 10 WCB L0 100 WCB L0 01
CAST STEEL GLOBE VALVE ANSI 10Lb Impact Handwheel For NPS and larger 1. Design and Manufacture Standard: BS 17. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard:. Inspection and Test Standard: API 9 NPS L Weight(Kg) d Hw Hg Dw Dg inch mm RF RTJ BW H.W. G.O. 1-1/ 0 1 17 1-1 - 1 - -1/ 0 0 0 1 0 1 0-00 - - 1 9 1 0-0 - - 1 1 7 90-0 - - 100 9 0 9 10-00 - 7-1 9 17 0-0 - 111-10 0 19 0 1 0 0 10 1 00 9 0 9 0 00 00 10 7 00 10 0 77 0 0 0 00 0 1 00 9 711 9 0 0 9 00 0 7 01
CAST STEEL GLOBE VALVE ANSI 00Lb Impact Handwheel For NPS and larger 1. Design and Manufacture Standard: BS 17. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard:. Inspection and Test Standard: API 9 NPS L Weight(Kg) d Hw Hg Dw Dg inch mm RF RTJ BW H.W. G.O. 1-1/ 0 9 1 9 0-10 - 19 - -1/ 0 0 7 7 1-00 - - 9 0 9 0-00 - - 1 1 7 0-0 - - 100 71 10 1-0 - 7-1 00 1 00 17 0-0 - 111-10 0 1 0 90 00 10 1 19 00 9 7 9 0 900 90 0 0 7 7 10 0 90 990 00 0 00 1 00 711 77 711 0 100 100 700 0 7 01
CAST STEEL GLOBE VALVE ANSI 00Lb Impact Handwheel For NPS" and larger Impact Handwheel For NPS" and larger 1. Design and Manufacture Standard: BS 17. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard:. Inspection and Test Standard: API 9 NPS L Weight(Kg) d Hw Hg Dw Dg inch mm RF RTJ BW H.W. G.O. -1/ 0 0 9 9 9 1 0-0 - - 0 0 10-0 - - 9 7-00 - - 100 10 7 00 10 107 1 1 0 11 0 17 0 00 10 1 1 10 9 9 1 7 0 0 0 90 00 0 0 00 90 90 0 0 0 01
CAST STEEL GLOBE VALVE ANSI 900Lb Impact Handwheel For NPS" and larger Impact Handwheel For NPS" and larger 1. Design and Manufacture Standard: BS 17. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard:. Inspection and Test Standard: API 9 NPS L Weight(Kg) d Hw Hg Dw Dg inch mm RF RTJ BW H.W. G.O. -1/ 0 0 71 1 0-0 - - 19 19 0-0 - - 1 1 7 0 00 10 9 1 100 7 0 7 10 70 0 10 10 10 1 9 9 17 70 0 0 0 70 10 10 1 10 1 90 101 0 0 10 0 01
CAST STEEL GLOBE VALVE ANSI 100Lb 7 1 1. BODY. BONNET. SEAL RING. HALF RING. RETAINER RING. RETAINER COVER 7. YOKE Structure Feature 1. Design and Manufacture Standard: BS 17. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard:. Inspection and Test Standard: API 9. Flanges ends available upon request NPS L Weight(Kg) d Hw Hg Dw Dg inch mm RF RTJ BW H.W. G.O. -1/ 0 0 71 1 0-0 - - 19 19 0-0 - - 1 1 7 0 00 10 9 1 100 7 0 7 10 70 0 10 10 10 1 9 9 17 70 0 0 0 70 10 10 1 10 1 90 101 0 0 10 0 017
CAST STEEL GLOBE VALVE ANSI 00Lb 7 1 1. BODY. BONNET. SEAL RING. HALF RING. RETAINER RING. RETAINER COVER 7. YOKE Structure Feature 1. Design and Manufacture Standard: BS 17. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard:. Inspection and Test Standard: API 9. Flanges ends available upon request NPS L Weight(Kg) d Hw Hg Dw Dg inch mm RF RTJ BW H.W. G.O. -1/ 0 0 71 1 0-0 - - 19 19 0-0 - - 1 1 7 0 00 10 9 1 100 7 0 7 10 70 0 10 10 10 1 9 9 17 70 0 0 0 70 10 10 1 10 1 90 101 0 0 10 0 01
CAST STEEL SWING CHECK VALVE DESIGN CHARACTERISTICS OF BS 1 CAST STEEL SWING CHECK VALVE Large-sized check valves are provided with lifting rings for the convenience of lifting Lift lug Nut Stud Cover Bolted cover and the type of middle flange gasket may be different according to pressure; Class 00 check valve may adopt pressure self-tightening seal structure. Gasket Hinge Pin Solid pin is precisely installed and proveided with high intensity to ensure operational performance and service life of valve. Arm Disc Seat Body 019
CAST STEEL SWING CHECK VALVE MATERIAL LIST FOR BS1 CAST STEEL SWING CHECK VALVE No. Part Name Carbon Steel Stainless Steel Alloy Steel 1 Body ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC Seat ASTM A10 ASTM A1 F0 ASTM A10 ASTM A1 F0 Disc Arm PIn Connector 7 Gasket Bonnet 9 Stud 10 NUt ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC ASTM A1 Fa ASTM A1S F0 ASTM A7 TYPE0 ASTM A1 F0 ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC Graphite+SS0 Graphite+SS0 Graphite+SS0 Graphite+SS0 ASTM A1 WCB ASTM A LCB ASTM A1 CF ASTM A17 WC ASTM A19 B7 ASTM A19 B ASTM A19 CF ASTM A19 B7 ASTM A19 H ASTM A19 ASTM A19 ASTM A19 Remarks: 1. Pressure and temperature rating of casing material referred to Appendix. Chemical compositions and mechanical property of casing material reffered to Appendix. Commonly used trim materials and service coverage reffered to Appendix. NACE MR-01-7 when specified by user Stellite overlay available Test-Pressure (MPa) Applicable Temperature Applicable Medium BS 1 Pressure-Temperature Rating ASME B1. Face-Face ASME B1.10 Flange Ends ASME B1. / ASME B1.7 Buttwelding Ends ASME B1. Inspection and Test API9 Nominal Pressure (Class) 10 00 00 00 900 100 Shell Test High Pressure Seal Test Low Pressure Seal Test Different raw material for different work temperature.9 7. 10.0 1.0. 7..07. 7.1 11.0 1. 7. Water, Oil, Gas and other causticity medium (Different raw material for different medium 0. 00
CAST STEEL SWING CHECK VALVE CAST STEEL SWING CHECK VALVE PRODUCT LINE Size Bolted Bonnet API Pressure Seal Bonnet BS DN NPS 10 00 00 00 900 100 00 0 1-1/ 0-1/ 0 100 10 00 0 10 00 1 0 1 00 1 0 1 00 0 00 0 700 70 0 00 900 For sizes classes not shown please contact our sales department 10 WCB L0 100 WCB L0 01
CAST STEEL SWING CHECK VALVE CLASS 10Lb - 00Lb REMARK: EYE SCREW FOR NPS" & LARGER 1. Design and Manufacture Standard: APID or BS1. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard: ANSI B1.(NPS<="), ASME B1.7(NPS>"). Inspection and Test Standard: API 9 MAIN DIMENSION SIZE CLASS 10 CLASS 00 inch NPS mm L RF RTJ BW d H Weight L (Kg) RF RTJ BW d H Weight (Kg) 0 0 1 0 1 1 1 7 7 1 1 0-1/ 1 9 1 17 0 9 0 9 19 0 1 1 7 17 7 1 1 7 10 0 100 9 0 9 10 19 71 10 0 1 1 0 0 17 00 1 00 17 9 0 10 1 0 9 0 1 10 00 9 0 9 0 0 11 9 0 0 190 10 0 0 19 0 9 1 00 99 711 99 0 0 1 711 77 711 0 0 0 1 0 77 00 77 7 0 0 7 0 0 1 00 7 7 0 0 79 7 0 1 0 97 991 97 1 0 97 99 97 7 100 0 00 97 991 97 9 7 770 101 10 101 9 70 10 00 19 10 19 91 70 90 1 1 1 91 0 190 0 19-19 0 10 1 17 1 90 00 700 1-1 90 10 199 1 199 110 00 0 70 1-1 7 90 190 19 119 19 7 10 00 0
CAST STEEL SWING CHECK VALVE CLASS 00Lb - 900Lb REMARK: EYE SCREW FOR NPS" & LARGER 1. Design and Manufacture Standard: APID or BS1. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard: ANSI B1.(NPS<="), ASME B1.7(NPS>"). Inspection and Test Standard: API 9 MAIN DIMENSION SIZE CLASS 00 CLASS 900 inch NPS mm L RF RTJ BW d H Weight L (Kg) RF RTJ BW d H Weight (Kg) 0 9 9 9 1 170 71 1 00-1/ 0 0 17 0 19 19 0 7 0 9 7 1 1 7 0 9 100 10 90 117 7 0 7 10 0 1 1 0 11 0 17 0 1 9 9 17 0 00 10 9 9 1 0 19 10 1 10 1 00 00 0 0 0 0 0 77 70 77 0 0 10 0 77 791 77 0 1 1 0 70 1 00 1 0 70 9 9 9 0 1070 1 0 9 9 9 7 9 90 109 10 109 0 110 1 00 991 99 991 7 0 10 110 110 110 7 70 1790 1 0 109 109 109 77 100 119 1 119 0 00 0 00 119 100 119 9 970 10 11 1 11 71 100 00 00 197 107 197 91 1100 00 19 1 19 100 00 0
CAST STEEL SWING CHECK VALVE CLASS 100Lb - 00Lb REMARK: EYE SCREW FOR NPS" & LARGER 1. Design and Manufacture Standard: APID or BS1. Material Pressure-Temp Standard: ANSI B1.. End to End Standard: ANSI B1.10. Flange End Dimension Standard: ANSI B1.(NPS<="), ASME B1.7(NPS>"). Inspection and Test Standard: API 9 or APID MAIN DIMENSION SIZE CLASS 100 CLASS 00 inch NPS mm L RF RTJ BW d H Weight (Kg) L RF RTJ BW d H Weight (Kg) 0 71 1 10 1 1 0-1/ 19 19 0 7 0 1 0 0 100 0 70 7 70 7 0 10 7 7 0 1 100 9 10 0 10 7 7 7 70 0 1 7 7 7 17 0 9 79 07 79 9 10 0 10 70 711 70 1 0 91 97 91 11 0 0 00 1 19 00 10 10 10 179 0 970 10 0 991 1000 991 9 90 110 170 19 170 0 1700 1 00 110 11 110 7 0 10 1 1 1 90 00 1 0 17 17 17 1 710 000 - - - - - - 1 00 1 107 1 0 0 700 - - - - - - 0