Tubular motors
Technology Versatility Practicality TECHNOLOGICAL SOLUTIONS FOR SECURE OPERATION Tubular gearmotors (Ø 3mm and Ø mm) equipped with an encoder and an electronic limit switch for total control of opening and closure movement. Tubular gearmotors (Ø mm; 20,30 and 0Nm) capable of interfacing on Bus Line KNX to directly receive commands and information from the other network devices, without requiring further connections. Radio operation with dedicated 3.1 MHz: frequency: more immune to disturbances and interference compared to the standard frequency of 33.92 MHz and with a higher wall and obstacle penetration compared to the frequency of 868.30 MHz. Wall (Artemis) or portable (Proteo) transmitters capable of controlling one or more automations simultaneously, or multiple groups of awnings and shutters. Vibration anemometer sensors (Syroco). Fitted, miniature control modules (Dev) VEO-RFE Tubular motor Ø 3 mm with electronic limit switch, encoder and built-in radio receiver LEX Tubular motor Ø mm with mechanical limit switch V2 2 ARTEMIS Wall-mounted transmitter
VERSATILITY V2 offers a complete range of automations capable of moving shutters up to 16 Kg in weight, and awnings with arm extension up to m long. Over 100 different models of adaptors and accessories (crowns, pulleys, walls supports, etc.) for installation of tubular gearmotors. LEX-RFE Tubular motor Ø mm with electronic limit switch, encoder and built-in radio receiver SYROCO Vibration anemometer sensor LEX-KNX Range of tubular motors in 20-0-0 Nm version PRACTICALITY Quick coupling brackets Facilitated installation of the tubular gearmotors thanks to particular quick coupling brackets (optional). Always with 2 metres of already wired cabling, supplied with the motor and the possibility of connecting an external button to control automation, including on models equipped with an integrated radio receiver. The miniature modules of the Dev line, installed directly inside normal electric boxes, are perfect to control devices which cannot be reached directly via cable.cavo. DEV Miniature transmitter modules V2 3
INDEX OF PRODUCTS TUBULAR MOTORS Ø3 tubular motors 6 veo 7 veo-rfe Ø tubular motors 10 lex 11 lex-rm 12 lex-fe 13 lex-rfe 1 lex-rfe-tc 1 lex-rfo 16 lex-h 17 lex-hrm Ø9 tubular motors 2 roll 2 hand-roll V2
INDEX OF PRODUCTS TUBULAR MOTORS 30 31 proteo 32 33 artemis Miniaturized control modules 3 3 dev Control units 36 cu3 - cu - cu 37 cu1 38 prg2 38 prg3 Transmitters 1 Sensors 39 syroco 0 mistral 0 hurricane 1 hurricane-rs 1 typhoon 2 3 6 7 8 9 10 11 12 V2
TUBULAR MOTORS veo Tubular motor Ø 3 mm with mechanical limit switch PLUS Mechanical limit switch easy to adjust and reliable over time Compact and noiseless, ideal for indoor installations L Extremely small size, particularly suitable for installations in narrow spaces 2 2 29 Ø3 7 11 2 meters of cable wired to the motor M3 VEO6-230V VEO10-230V VEO13-230V 27A0 27A023 27A029 Maximum load* (Kg) 17 27 3 Torque (Nm) 6 10 13 Speed (rpm) 28 17 1 Power supply (Vac - Hz) Maximum electric power (W) 121 121 121 Rated current (A) 0.3 0.3 0,3 Working time (min) Limit switch range (n.) 36 36 36 Length - L - (mm) 7 7 7 Protection degree (IP) * Value calculated with roller Ø 0 mm CABLE LENGTH 2 m brown blue black yellow-green V2 6
TUBULAR MOTORS veo-rfe Tubular motor Ø 3 mm with electronic limit switch, encoder and built-in radio receiver (3.1 MHz) PLUS Maximum control of the motor movement thanks to the use of encoder and electronic limit switch Automation control, limit switch setting and storage of new transmitters are radio controlled 2 2 11 29 Possibility to connect an external button to control the automation Ø3 2 meters of cable wired to the motor 7 Setting of limit switch intermediate position L M3 VEO-RFE6-230V VEO-RFE10-230V 27A02 27A02 Maximum load* (Kg) 17 27 Torque (Nm) 6 10 Speed (rpm) Power supply (Vac - Hz) 28 17 Maximum electric power (W) 121 121 Rated current (A) 0.3 0.3 Frequency (MHz) Working time (min) 3.1 3.1 Length - L - (mm) 0 0 Protection degree (IP) * Value calculated with roller Ø 0 mm CABLE LENGTH 2 m brown blue black yellow-green V2 7
ACCESSORIES PULLEY CROWN COD. 162710 COD. 162711 COD. 162712 COD. 16323 8 0 0, 6 TUBE 2, 3 OCTAGONAL Ø 0 1, 1, 1,2 ROUND Ø 0 3, ROUND Ø 0 COD. 162713 1, COD. 16277 COD. 162709 COD. 162782 COD. 162783 12 60 ROUND Ø 0 0,8 CORRUGATED NOTCH Ø 60 V2 8
ACCESSORIES ACCESSORIES DESCRIPTION 30 0 Wall bearing 10 x 10 mm (max. 10 Nm) 162729 Wall bearing (max. 10Nm) 16312 Snap-in bearing (max. 10Nm) 16289 Box with double self-locking push button 162886 Box with double spring release push button 162887 V2 9
TUBULAR MOTORS lex Tubular motor Ø mm with mechanical limit switch PLUS Mechanical limit switch easy to adjust and reliable over time Compact head for easy installation Rapid fixing bracket for easy assembly of the motor (accessory) L 2 17 2 Ø 8 9 2 meters of cable wired to the motor M LEX20-230V LEX30-230V LEX0-230V LEX0-230V LEX60-230V 27B2 27B3 27B 27B 27B311 Maximum load* (Kg) 3 80 9 11 Torque (Nm) 20 30 0 0 60 Speed (rpm) 1 1 1 12 8 Power supply (Vac - Hz) Maximum electric power (W) 1 191 198 20 208 Rated current (A) 0.6 0.83 0.86 0.89 0,89 Working time (min) Limit switch range (n.) Length - L - (mm) 0 80 00 00 10 Protection degree (IP) * Value calculated with roller Ø 0 mm CABLE LENGTH 2 m brown blue black yellow-green V2 10
TUBULAR MOTORS lex-rm Tubular motor Ø mm with mechanical limit switch and built-in radio receiver (3.1 MHz) PLUS Mechanical limit switch easy to adjust and reliable over time Automation, storage of new transmitters, and sensor threshold are radio controlled L Possibility to connect an external button to control the automation 2 17 2 Rapid fixing bracket for easy assembly of the motor (accessory) Ø 8 9 2 meters of cable wired to the motor M LEX-RM20-230V LEX-RM30-230V LEX-RM0-230V LEX-RM0-230V 27B6 27B7 27B8 27B9 Maximum load* (Kg) 3 80 9 Torque (Nm) 20 30 0 0 Speed (rpm) 1 1 1 12 Power supply (Vac - Hz) Maximum electric power (W) 1 191 198 20 Rated current (A) 0.6 0.83 0.86 0.89 Working time (min) Limit switch range (n.) Frequency (MHz) 3.1 3.1 3.1 3.1 Length - L - (mm) 660 660 660 660 Protection degree (IP) * Value calculated with roller Ø 0 mm CABLE LENGTH 2 m white blue brown black yellow-green V2 11
TUBULAR MOTORS lex-fe Tubular motor Ø mm with electronic limit switch and encoder PLUS Maximum control of the motor movement thanks to the use of encoder and electronic limit switch Obstacle detection (only with shutters equipped with SICUR BLOCK) L Quick programming of the limit switches by using the accessory device fast-prog 2 17 2 9 Automation control via 2 external buttons (OPEN and CLOSE) Ø 8 Rapid fixing bracket for easy assembly of the motor (accessory) M LEX-FE20-230V LEX-FE30-230V LEX-FE0-230V LEX-FE0-230V 27B230 27B231 27B232 27B233 Maximum load* (Kg) 3 80 9 Torque (Nm) 20 30 0 0 Speed (rpm) 1 1 1 12 Power supply (Vac - Hz) Maximum electric power (W) 1 191 198 20 Rated current (A) 0.6 0.83 0.86 0.89 Working time (min) Length - L - (mm) 0 660 660 660 Protection degree (IP) * Value calculated with roller Ø 0 mm CABLE LENGTH 2 m brown blue black yellow-green V2 12
TUBULAR MOTORS lex-rfe Tubular motor Ø mm with electronic limit switch, encoder and built-in radio receiver (3.1 MHz) PLUS Maximum control of the motor movement thanks to the use of encoder and electronic limit switch Obstacle detection (only with shutters equipped with SICUR BLOCK) Setting of limit switch intermediate position L Automation control, storage of new transmitters, limit switch setting, and sensor threshold are radio controlled 2 17 2 9 Rapid fixing bracket for easy assembly of the motor (accessory) Ø 8 Possibility to connect an external button to control the automation M LEX-RFE20-230V LEX-RFE30-230V LEX-RFE0-230V LEX-RFE0-230V 27B23 27B23 27B236 27B237 Maximum load* (Kg) 3 80 9 Torque (Nm) 20 30 0 0 Speed (rpm) 1 1 1 12 Power supply (Vac - Hz) Maximum electric power (W) 1 191 198 20 Rated current (A) 0.6 0.83 0.86 0.89 Working time (min) Frequency (MHz) 3.1 3.1 3.1 3.1 Length - L - (mm) 0 660 660 660 Protection degree (IP) * Value calculated with roller Ø 0 mm CABLE LENGTH 2 m white blue brown black yellow-green V2 13
TUBULAR MOTORS lex-rfe-tc Tubular motor Ø mm for drop awnings. Electronic limit switch, encoder and built-in radio receiver (3.1 MHz) PLUS Maximum control of the motor movement thanks to the use of encoder and electronic limit switch Automation control, storage of new transmitters, limit switch setting, and sensor threshold are radio controlled L 2 17 Rapid fixing bracket for easy assembly of the motor (accessory) 2 8 9 Possibility to connect an external button to control the automation Ø Possibility to control the fastening of retainers automatically or manually M LEX-RFE-TC 30-230V LEX-RFE-TC 0-230V 27B288 27B289 Maximum load* (Kg) 9 Torque (Nm) 30 0 Speed (rpm) Power supply (Vac - Hz) 1 12 Maximum electric power (W) 191 20 Rated current (A) 0.83 0.89 Frequency (MHz) Working time (min) 3.1 3.1 Length - L - (mm) 660 660 Protection degree (IP) * Value calculated with roller Ø 0 mm CABLE LENGTH 2 m white blue brown black yellow-green V2 1
TUBULAR MOTORS lex-rfo Tubular motor Ø mm for shutters with adjustable louvers. Electronic limit switch, encoder and built-in radio receiver (3.1 MHz) PLUS Maximum control of the motor movement thanks to the use of encoder and electronic limit switch Automation control, limit switch setting and storage of new transmitters are radio controlled L 2 17 Adjustment of louvers opening position. 2 9 Rapid fixing bracket for easy assembly of the motor (accessory) Ø 8 Possibility to connect an external button to control the automation M LEX-RFO0-230V LEX-RFO0-230V 27B277 27B278 Maximum load* (Kg) 80 9 Torque (Nm) 0 0 Speed (rpm) Power supply (Vac - Hz) 1 12 Maximum electric power (W) 198 20 Rated current (A) 0.86 0.89 Frequency (MHz) Working time (min) 3.1 3.1 Length - L - (mm) 660 660 Protection degree (IP) * Value calculated with roller Ø 0 mm CABLE LENGTH 2 m white blue brown black yellow-green V2 1
TUBULAR MOTORS lex-h Tubular motor Ø mm with mechanical limit switch and manual override PLUS Mechanical limit switch easy to adjust and reliable over time Manual override for manual operation of awnings and rolling shutters in case of power outage L 2 meters of cable wired to the motor 2 2 60 8 Ø 76,6 M6 LEX-H20-230V LEX-H30-230V LEX-H0-230V LEX-H0-230V 27B30 27B30 27B306 27B307 Maximum load* (Kg) 3 80 9 Torque (Nm) 20 30 0 0 Speed (rpm) 1 1 1 12 Power supply (Vac - Hz) Maximum electric power (W) 1 191 198 20 Rated current (A) 0.6 0.83 0.86 0.89 Working time (min) Limit switch range (n.) Length - L - (mm) 20 90 90 90 Protection degree (IP) * Value calculated with roller Ø 0 mm CABLE LENGTH 2 m brown blue black yellow-green V2 16
TUBULAR MOTORS lex-hrm Tubular motor Ø mm with mechanical limit switch, built-in radio receiver (3.1 MHz) and manual override PLUS Mechanical limit switch easy to adjust and reliable over time Manual override for manual operation of awnings and rolling shutters in case of power outage L Automation control, storage of new transmitters, limit switch setting, and sensor threshold are radio controlled 2 2 60 M6 8 Ø 76,6 Possibility to connect an external button to control the automation LEX-HRM30-230V LEX-HRM0-230V LEX-HRM0-230V 27B308 27B309 27B310 Maximum load* (Kg) 80 9 Torque (Nm) 30 0 0 Speed (rpm) 1 1 12 Power supply (Vac - Hz) Maximum electric power (W) 191 198 20 Rated current (A) 0.83 0.86 0.89 Working time (min) Limit switch range (n.) Frequency (MHz) 3.1 3.1 3.1 Length - L - (mm) 769 769 769 Protection degree (IP) * Value calculated with roller Ø 0 mm CABLE LENGTH 2 m white blue brown black yellow-green V2 17
ACCESSORIES TUBE PULLEY CROWN COD. 16271 COD. 16272 COD. 162866 COD. 162867 COD. 16301 COD. 16302 COD. 162801 COD. 162802 COD. 162718 COD. 162719 COD. 162716 COD. 16271 7 2 0, 8 OCTAGONAL Ø 2 8 7 7 8 0, OCTAGONAL Ø 7 6 60 2, 0, OCTAGONAL Ø 60 x 0, 10 60 6 0, 1 OCTAGONAL Ø 60 11 70 1 OCTAGONAL Ø 70 7 60 0, STAR Ø 60 V2 18
ACCESSORIES PULLEY CROWN COD. 162808 COD. 162809 COD. 1632 COD. 162891 COD. 162898 COD. 162899 COD. 162762 COD. 162763 COD. 162798 COD. 162799 COD. 162767 COD. 162862 TUBE 0, 6 ZF 1 80 1 ZF6 60 ZF80 1, 70 ROUND Ø 60 x 1, 1, ROUND Ø 70 x 1, 6 0,6 62 1, DEPRAT Ø 62 V2 19
ACCESSORIES TUBE 10 PULLEY CROWN COD. 162806 COD. 162807 COD. 16313 COD. 1631 COD. 1631 COD. 16316 COD. 1630 COD. 162721 COD. 1630 COD. 16306 COD. 16278 COD. 16279 1 89 2 1, DEPRAT Ø 89 63 1 ROLLERBAT NOTCH Ø 63 70 1 ROLLERBAT NOTCH Ø 70 12 13 70 0, 8 NOTCH Ø 70 12 78, 1 ROLLERBAT NOTCH Ø 78 13 78 10 1 FLAT NOTCH Ø 78 V2 20
ACCESSORIES ACCESSORIES DESCRIPTION Rapid fixing bracket (max. 20 Nm) (for motor LEX, LEX-RM, LEX-FE, LEX-RFE) 16318 Rapid fixing bracket (max. 0 Nm) (for motor LEX, LEX-RM, LEX-FE, LEX-RFE) 16319 Square pin bracket (for motor LEX, LEX-RM, LEX-FE, LEX-RFE) 16317 Wall bearing 10 x 10 mm (max. 30 Nm) 162728 Wall bearing 10 x 10 mm (max. 30 Nm) 16287 Wall bearing 10 x 10 mm (max. 0 Nm) 162829 8 2 6, 6 8 9 6,2 68 10 8 10 60 8 30 ø7 ø 7 8 2 ø 6 60 8 30 ø7 ø 7 V2 21
ACCESSORIES ACCESSORIES DESCRIPTION 3 10 10 30 10 26 Vertical adjustable bearing 10 x 10 mm 16333 ø3, ø 27 27 110 Vertical adjustable bearing with slot 10 x 10 mm 1628 ø6, 10 9 100 Square plate bearing 10 x 10 mm 16276 100 joint hexagon 7 162823 90 joint hexagon 7 16282 V2
ACCESSORIES ACCESSORIES DESCRIPTION 80 Eyelet 80 mm hexagon 7 16282 Jointed bar (1800 mm) 162736 Box with double self-locking push button 162886 Box with double spring release push button 162887 V2 23
TUBULAR MOTORS roll Tubular motor Ø 9 mm with mechanical limit switch PLUS Mechanical limit switch easy to adjust and reliable over time L Compact head for easy installation 33 20 2 meters of cable wired to the motor Ø9 Ø30 16 Ø6 ROLL80-230V ROLL100-230V ROLL10-230V 27C03 27C036 27C039 Maximum load* (Kg) 12 16 230 Torque (Nm) 80 100 10 Speed (rpm) 1 12 7 Power supply (Vac - Hz) Maximum electric power (W) 330 3 38 Rated current (A) 1.3 1. 1, Working time (min) Limit switch range (n.) Length - L - (mm) 620 620 620 Protection degree (IP) * Value calculated with roller Ø 70 mm CABLE LENGTH 2 m brown blue black yellow-green V2 2
TUBULAR MOTORS hand-roll Tubular motor Ø 9 mm with mechanical limit switch and manual override PLUS Mechanical limit switch easy to adjust and reliable over time L Manual override for manual operation of awnings and rolling shutters in case of power outage 2 2 82 M6 6 Ø9 90 2 meters of cable wired to the motor HAND-ROLL80-230V HAND-ROLL100-230V HAND-ROLL10-230V 27C037 27C038 27C00 Maximum load* (Kg) 12 16 230 Torque (Nm) 80 100 10 Speed (rpm) 1 12 7 Power supply (Vac - Hz) Maximum electric power (W) 330 3 38 Rated current (A) 1.3 1. 1, Working time (min) Limit switch range (n.) Length - L - (mm) 620 620 620 Protection degree (IP) * Value calculated with roller Ø 70 mm CABLE LENGTH 2 m brown blue black yellow-green V2 2
ACCESSORIES TUBE PULLEY CROWN COD. 162726 COD. 162727 COD. 16286 COD. 16286 COD. 16276 COD. 16277 COD. 16289 COD. 16288 COD. 16277 COD. 16277 11 70 1 70 OCTAGONAL Ø 70 1, 80 ROUND Ø 70 2 100 ROUND Ø 80 3, 103 ROUND Ø 100 x 3, 3 ROUND Ø 103 V2 26
ACCESSORIES TUBE PULLEY CROWN COD. 162861 COD. 162860 COD. 16278 COD. 16278 COD. 16289 COD. 162893 COD. 16307 COD. 16308 78 13 10 1 78 FLAT NOTCH Ø 78 1 13 8 NOTCH Ø 78 BAT 1, NOTCH Ø 8 10 1 89 2 1, DEPRAT Ø 89 V2 27
ø ACCESSORIES ACCESSORIES DESCRIPTION 90 70 16 ø7 ø8 0 Wall bearing 16 x 16 mm 162731 7 7 30 Wall bearing 16 x 16 mm 162819 16 8 100 16 Square plate bearing 16 x 16 mm 16273 100 Jointed bar (1800 mm) 162736 Box with double self-locking push button 162886 Box with double spring release push button 162887 V2 28
ACCESSORIES DESCRIPTION Parachute 70 Nm with 7 metres of cable 16339 Parachute 10 Nm with 7 metres of cable 1630 18.1 9 120 ACCESSORIES 9. 2 Parachute 10 Nm with 7 meters of cable Support included 8 2. 1631 80 28.3 120 2 ø 12 3. 180 TUBE DIAMETER Ø60 x 2,6 Ø70 x 2,9 Ø76,1 x 2,9 Ø82, x 3,2 Ø89,9 x 3,2 WIDTH 16339 1630 1631 HEIGHT 1, 2 2, 1, 2 2, 1, 2 2, 1, 2 2, 1, 11 107 9 11 137 136 129 129 129 120 120 120 1, 2 2, 2 13 107 9 12 12 12 119 119 118 112 112 112 2, 127 107 9 120 120 118 119 119 118 112 112 112 1, 286 2 2 286 2 2 26 263 263 2 2, 286 2 2 1, 260 170 20 20 2 0 170 211 20 2, 190 170 182 182 TUBE DIAMETER Ø101,6 x 3,6 Ø108 x 306 Ø11,3 x 3,6 Ø121 x Ø127 x WIDTH HEIGHT 2, 6 2, 6 2, 6 2, 6 2, 6 1, 16339 2 2, 1630 1631 1, 207 21 202 189 2 207 21 202 189 2, 207 1, 3 218 10 210 208 160 198 19 181 186 183 182 176 171 170 2 199 198 10 189 188 160 18 18 180 17 172 170 167 16 162 2, 17 17 10 169 168 160 166 166 163 160 17 17 13 11 18 21 201 189 V2 29
ELECTRONICS FOR TUBULAR MOTORS proteo 3.1 MHz transmitter for awnings and shutters V2 30 proteo1 proteo 1 channel transmitter, ON/ OFF sun button, button for the management of a courtesy light -channel transmitter, ON/OFF sun button and courtesy light proteo6 proteo12 proteo12-d 6-channel transmitter, ON/OFF sun function, group function 12-channel transmitter, ON/OFF sun function, group function 12-channel transmitter with display, event programming and automatic operation
proteo PLUS Available in models with 1,, 6, 12 channels to control one or more automated systems simultaneously Multiple group function to program up to 8 automation groups Possibility to activate/deactivate the sun sensor on remote control units and motors with built-in control unit Button dedicated to controlling a courtesy light via the control unit CU or DEV-R2 module (only for PROTEO1 and PROTEO models) Built-in dip-switch to program the functions of SCREEN control units and tubular motors with built-in control unit Convenient wall mount supplied Model with display (PROTEO12-D) with advanced features: - possibility of programming up to events per day - automatic or manual operating mode PROTEO1 PROTEO PROTEO6 PROTEO12 PROTEO12-D 10T00 10T01 10T02 10T03 10T0 Channels 1 6 12 12 Frequency (MHz) 3.1 Range in open field (m) 300 Power supply (battery type) 1 x Lithium 3V (CR2032) Max. absorption (ma) < 1 Dimensions (mm) 160 x x 1 V2 31
ELECTRONICS FOR TUBULAR MOTORS artemis Wall-mounted 3.1 MHz transmitter for awnings and shutters artemis1: 1-channel wall-mounted transmitter artemis2: 2-channel wall-mounted transmitter artemis6: 6-channel wall-mounted transmitter, ON/OFF sun button V2 32
artemis PLUS ARTEMIS series transmitters use simple table transmitters or can be assembled with two V2 plates available in the various colours below. The plates are equipped with an internal magnet to guarantee transmitter coupling. Available in 1, 2, 6 channel models to control one or more automations simultaneously. Possibility of enabling / disabling the sun sensor on the remote control units and on the motors of the integrated control unit (ARTEMIS6) ACCESSORIES 163 163 1636 1637 1638 ARETMIS1 ARETMIS2 ARETMIS6 10K02 10K026 10K027 Channels 1 2 6 Frequency (MHz) 3.1 Range in open field (m) 300 Power supply (battery type) 1 x Lithium 3V (CR2032) Max. absorption (ma) < 2 Dimensions (mm) 9 x 3 x 13 V2 33
ELECTRONICS FOR TUBULAR MOTORS dev Built-in miniature control modules 3 3 2 2 1 3 dev-t1: built-in miniature transmitter powered from the mains dev-r1: built-in miniature receiver for controlling a single-phase asynchronous motor dev-r2: built-in miniature receiver for controlling a load up to 00W V2 3
dev PLUS Ideal for controlling devices not directly accessible via cable Built-in installation inside of regular electrical boxes Power supply with extended range (8 260 Vac - 0/60 Hz) Very low power consumption in stand-by dev-t1 wired inputs for N.O. buttons channels for separate management of devices dev-r1 3.1 MHz radio receiver with integrated antenna Compatible with PROTEO, ARTEMIS and DEV-T1 series transmitters Memory able to handle up to 30 radio channels Two wired inputs: up and down Integrated button for programming operations Wireless programming via a stored remote control Wireless management of HURRICANE-RS and TYPHOON series weather sensors dev-r2 3.1 MHz radio receiver with integrated antenna Compatible with PROTEO, ARTEMIS and DEV-T1 series transmitters Memory able to handle up to 30 radio channels Two wired inputs Programming via integrated push button or PROTEO transmitters Wireless programming via a stored remote control Relay output with no-voltage contacts for loads of up to 00W dev-t1 dev-r1 dev-r2 M 230V 230V 230V DEV-T1 DEV-R1 DEV-R2 10K02 12E107 11D023 Power supply (Vac - Hz) 8-260 / 0-60 8-260 / 0-60 8-260 / 0-60 Frequency (MHz) 3.1 3.1 3.1 Absorption in stand-by (ma) 0,1 0,2 0,2 Working temperature ( C) -20 +60-20 +60-20 +60 Maximum operating time (s) 120 120 - Dimensions (mm) 20 x 3 x 1 20 x 3 x 1 20 x 3 x 1 V2 3
ELECTRONICS FOR TUBULAR MOTORS cu3 - cu - cu External control unit for the automation of awnings or rolling shutters PLUS Independent inputs for UP/DOWN push buttons or OPEN/STOP/CLOSE/STOP push button Input for MISTRAL/HURRICANE sensors WIND, SUN, TEMPERATURE sensor levels adjustable by transmitter or directly on the control unit Management of closure input with control arriving from burglar alarm control unit Plug-in radio receiver (optional) at the frequency of 3.1 MHz Possibility to store up to 30 transmitters cu3: cu: cu: Output for 1 motor Output for 2 motors, independent or synchronized on the same axis Output for 1 motor Output for light control, with power up to 00 W CU3 CU CU 12E08 12E09 12E060 Power supply (Vac - Hz) Maximum load (W) 00 2 x 00 00 + 00 (motor + light) Protection degree (IP) Working temperature ( C) -20 +60-20 +60-20 +60 Dimensions (mm) 12 x 120 x 2 12 x 120 x 2 12 x 120 x 2 11B037 3.1 MHz plug-in receiver V2 36
ELECTRONICS FOR TUBULAR MOTORS cu1 External control unit for the automation of awnings or rolling shutters. Built-in receiver (3.1 MHz) PLUS OPEN/STOP/CLOSE/STOP button input Input for MISTRAL/HURRICANE sensors Built-in 3.1 MHz receiver Possibility to store up to 30 transmitters WIND, SUN, TEMPERATURE sensors adjustable by transmitter CU1 12E033 Power supply (Vac - Hz) Maximum load (W) 700 Protection degree (IP) Working temperature ( C) -20 +60 Dimensions (mm) 127 x 1 x 2 V2 37
ELECTRONICS FOR TUBULAR MOTORS prg2 Expansion board for 2 motors (single control) PRG2 12G013 Power supply (Vac - Hz) Maximum load (W) 2 x 100 Protection degree (IP) Working temperature ( C) -20 +60 Dimensions (mm) 127 x 1 x 2 prg3 Expansion board for 3 motors (multiple control) PRG3 12G008 Power supply (Vac - Hz) Maximum load (W) 3 x 1000 Protection degree (IP) Working temperature ( C) -20 +60 Dimensions (mm) 113 x 113 x 7 V2 38
ELECTRONICS FOR TUBULAR MOTORS syroco-rs Anemometer vibration sensor via radio (3.1 MHz) SYROCO-RS 18A026 Power supply (Vac - Hz) 2 x alkaline AAA Frequency (MHz) 3.1 Protection degree (IP) Working temperature ( C) -20 +60 Dimensions (mm) 1 x 32 x 2 V2 39
ELECTRONICS FOR TUBULAR MOTORS mistral Anemometer (cable signal) MISTRAL 18A009 Power supply (Vac - Hz) Protection degree (IP) Working temperature ( C) -20 +60 hurricane Anemometer with sun and temperature sensor (cable signal) HURRICANE 18A010 Power supply (Vac - Hz) Absorbed power (W) 3, Protection degree (IP) Working temperature ( C) -20 +60 V2 0
ELECTRONICS FOR TUBULAR MOTORS hurricane-rs Anemometer with sun and temperature sensor (WIRELESS) HURRICANE-RS 18A011 Power supply (Vac - Hz) Absorbed power (W) 3, Frequency (MHz) 3.1 Protection degree (IP) Working temperature ( C) -20 +60 typhoon Anemometer with sun and temperature sensor (WIRELESS and power supply by solar cells) TYPHOON 18A01 Frequency (MHz) 3.1 Protection degree (IP) Working temperature ( C) -20 +60 V2 1
ICONS Power supply Solar powered Mechanical limit switch Electronic limit switch Encoder Manual override Built-in receiver Connector for modular receiver Sun sensor on/off Courtesy light on/off Multiple groups Automatic or manual operation Sun sensor input Wind sensor input Temperature sensor input Plastic Metal V2 2
info@v2home.com - www.v2home.com