S pec1 t 1ca t ions [IT (ID[]] LC sk2solc-10 I Engine Type No. of cylinders Bore and stroke Displacement Rated power output Max. torque I Hydraulic System Direct injection, water-cooled, 4-cycle diesel engine with turbocharger, intercooler (Complies with EU (NRMM) Stage IV, EPA Tier IV Final. 4 4.41" (112 mm) x 5.12" (130 mm) 312.6 CU. in (5.123L) 178hp {133kW} /2, 1 OOrpm (SAE NET) 185hp {138kW} /2, 1 OOrpm (Without fan) 4691b-ft {636N.m} /1,600rpm (SAE NET) 4871b-ft {660N.m} /1,600rpm (Without fan) Two variable displacement pumps+ 1 gear pump 2 x 64.7 U.S.gph (2 x 245 Umin}, 1 x 5.5 U.S.gph (1 x 21 Umin} Boom, arm and bucket ----------------- 4,970 psi (34.3 Mpa} Power Boost 5,480 psi (37.8 Mpa} Travel circuit 4,970 psi (34.3 Mpa} Swing circuit 4,210 psi (28.4 Mpa} Control circuit 725 psi (5.0 Mpa} Pilot control pump Gear type Main control valves 8-spool Oil cooler Air cooled type I Swing System Swing motor Parking brake Swing speed Swing torque Tail swing radius Min. front swing radius Axial piston motor Oil disc brake, hydraulic operated automatically 10.2 rpm 63.300.ft (85.9 kn.m} (SAE) 10'2" (3,100 mm} 12'10" {3,910 mm} I Travel System Travel motors Parking brakes Travel shoes Travel speed 2 x axial piston, two-speed motors Oil disc brake per motor 51 each side 3.7 / 2.2 mph (5.8 / 3.6 km/h} Drawbar pulling force ---+-_5 _5,_1_00 s _{2_ 4_5_ k_n_} _(S_A_E _J _1_30_ 9_ ) Gradeability 70 % (35 ) Ground clearance 1 '6" (460 mm) I Cab & Control All-weather, sound-suppressed steel cab mounted on the silicon-sealed suspension mounts and equipped with a heavy, insulated floor mat. Control Two hand levers and two foot pedals for travel Two hand levers for excavating and swing Electric rotary-type engine throttle I Boom, Arm & Bucket Boom cylinder Arm cylinder Bucket cylinder I Refilling Capacities & Lubrications 5.3" (135 mm} x 4' 1" {1,235 mm} 5.7" (145 mm} x 5'4" {1,635 mm} 4.9" (125 mm} x 3'11" {1,200 mm} _ Fuel tank 106.5 U.S.gal {403L} Cooling system, 5.5_ U_. _S. g_al _{ _21_ L_} Engine oil, 5.4_ U_. _S.=ga_l {2_0_.5_L } Travel reduction gear 2 x 1.3 U.S.gal (2 x 5.0 L} Swing reduction gear, 1_.3_U.S.g a_l {5_.0 L} 43.6 U.S.gal (165 L} tank oil level 72.1 U.S.gal (273 L} hydraulic system 21.9U.S.gal {83L} I Working Ranges :.. ' Standard I Long Unit: ft-in{m}... 9'9" {2.98 m} 12'0" {3.66 m} a- Max. digging reach 33'1 O" {10.30) 36'0" {10.98) b-max. digging reach at ground level 33'3" {10 14) 35'6" {10.82) c-max. digging depth 23'0" {7.00} 25'2" {7.68) ax. digging height 32'1" {9.79) 33'6" {10.22) e- Max. dumping clearance 22'7" {6.88) 23'11" {7.28}..!...=_Min. dumping clearance 8'4" {2.55} 6'2" {1.87) g-max. vertical wall igging depth 20'2" {6.15} 22'10" {6.97) -h- Min. swing radius 12'10" {3 91) 12'10" {3.92) i -Horizontal digging stroke 17'3" {5 26) 21 '3"{6 48) at ground level j - Digging depth for 8 feet flat bottom 22'5" {6.82) 24'9" {7.54} Bucket cap.acity SAE heaf)ed cu.yd.{m'} 1.31 {1.00} 1.05 {0.80) l Digging Force Bucket digging force Arm crowding force I Dimensions SAE ISO SAE ISO Unit: s {kn} Standard 9'9" {2.98 m} Long 12'0" {3.66 m} 35,000 {156) 35,000 {156) 38,500 {171}* 38,500 {171}* 38,200 {170) 38,200 {170) 42,000 {187)* 42,000 {187)* 26,100 {116) 22,700 {101) 28,600 {127)* - 27,400 {122) 23,400 {104) 30,100 {134}* - *Power Boost engaged. A Overall length B Overall heigth (to top of boom) ------, C Overall width 11 '1" (3,390)** D Overall height (to top of cab) 10'2" {3,090} E Ground clearance of rear end* 3'7" {1,090} t--------------- F Ground clearance 1 '6"{460) d C j g - 9'9" (2.98 m} Standard Arm - 12 'O" (3.66 m} Long Arm 1 Tail swing radius G' Distance from center of ci swing to rear end H Tumbler distance Overall length of crawler J 8 Track gauge Shoe Width. ln(mm) L Overall width of upperstructure 12m 11 10 9 8 7 6 5 4 3 2 1 b 11m Unit: ft-in {mm} 10'2" {3,100} 10'1" {3,070} 12 '8" {3,850} 15'3" {4,640} 8'6" {2,590} 24" (600)/28"(700)/31.5"(800) 10'3" {3,120) * Without including height of shoe lug ** Shoe width : 2 '7" {800mm} I Bucket Selection Chart Bucket type Capacity (SAE) Cubic Yard (m 3 ).875 (.669) 1.125 (.860) 1.375 (1.051) General 1.625 (1.243) 1.71 (1.31) 2.0 (1.53) 2.25 (1.72).875 (.669) Heavy Duty 1.125 (.860) 1.375 (1.051) 1.625 (1.242) (.573) Severe Duty 1.00 (.764) 1.125 (.860).75 Width Inches (m) 24" (.609) 30" (.762) 36" (.914) 42" (1.066) 48" (1.219) 54" (1.371) 54" (1.371) 30" (.762) 36" (.914) 42" (1.066) 48" (1.219) 27" (.685) 30" (.762) 36" (.914) H - Used with material weight up to 3,000 s/cu yd (1,780 kg/m 3 ) M - Used with material weight up to 2,500 s/cu yd (1,483 kg/m 3 ) L - Used with material weight up to 2,000 s/cu yd (1,186 kg/m 3 ) X - Not recommended Bucket Weight (kg) Arm ft-in (m) 9'9"(2.98) 12'0"(3.66) 1,560 (708) H H 1,710 (776) H H 1,860 (844) H M 2,060 (934) M L 2,539 (1,176) M X 3,065 (1,390) L X 3,331 (1,511) L X 1,840 (834) H H 2,000 (907) H M 2,215 (1,004) M L 2,335 (1,059) L X 2,205 (1,000) H M 2,450 (1,111) M X 2,545 (1,154) X X I Operating Weight & Ground Pressure In standard trim, with standard boom, 9'9" {2.89ml arm, and 1.31 cu.yd. {1.00 m 3 } SAE heaped bucket Shoe width Triple rouser shoes (even hei ht) ln(mm), 2_4 "_ (6 _00_) --+- 2_ 8_" (7 _00_) --+- 3_1.5 "( 80_0 ) +- 35' '(9_0 0) --- psi {kpa}, 7. _5 {5_2 } -----+- 6.6 {4_5 } --+- 5.8 { _ 40 } --+- 5_.2_{ 36 } s {k } 57,900 {26,300} 58,900 {26,700) 59,300 {26,900} 60,100 {27,200} 13 14

j LONG REACH ATTACHMENT SK210LC-10 SK260LC-10 Main Specifications A B D C Model SK210LC SK260LC Long reach attachment Engine Rated power output (SAE NET) Swing speed Operating weight Ground pressure A Overall length B Overall height C Overall width D Shoe width hp{kw} / rpm rpm s {kg} psi {kpa} ft-in {mm} ft-in {mm} ft-in {mm} in {mm} 50ft HINO J05E-UM 160{119} /2,000 12.7 52,200 23,700 5.9 {41} 41'8" {12,690} 10'3" {3,120} 10'5" {3,180} 31.5" {800} 60ft HINO J05E-UN 178 {133} /2,100 10.2 62,600 {28,400} 6.1 {42} 47'8" {14,520} 10'4" {3,140} 11'1" {3,390} 31.5" {800} Working Ranges Range Boom a- Max. digging reach Arm b- Max. digging reach at ground level c - Max. digging depth d- Max. digging height e- Max. dumping clearance f - Min. dumping clearance g- Max. vertical wall digging depth h- Min. swing radius i - Horizontal digging stroke at ground level j - Digging depth for 2.4 m (8') flat bottom Bucket capacity SAE heaped cu.yd. SK210LC 50ft 28'8" 20'10" 51'11" 51'7" 39'5" 45'7" 37'10" 6'10" 36'8" 15'6" 38'1" 39'1" 0.6 Unit: ft-in SK260LC 60ft 33'11" 27'1" 60'10" 60'6" 48'4" 47'9" 40'5" 5'2" 40'5" 18'4" 48'5" 47'10" 0.5 d c e f g a b h 50' 45' 40' 35' 30' 25' 20' 15' 10' 5' 0' i -5' -10' -15' -20' -25' -30' -35' -40' -45' -50' 65' 60' 55' 50' 45' 40' 35' 30' 25' 20' 15' 10' 5' 0' SK210LC SK260LC

LONG REACH ATTACHMENT Lifting Capacities SK210LC-10 SK260LC-10 Rating over front Rating over side or 360 degrees A Reach from swing centerline for arm top B Bucket hook height above/below ground C Lifting capacities in pounds SK210LC 50ft B 40' 35' 30' 25' 20' 15' 10' 5' GL -5' -10' -15' -20' -25' -30' -35' A * 4,570 * 6,600 * 8,710 * 11,000 * 13,570 Boom; 28'8", Arm; 20'10", Bucket; Less, Counterweight; 12,100 s, Shoe; 31.5" 5' 10' 15' 20' 25' 30' 35' 40' 45' At Max. Reach * 4,570 * 6,600 * 8,710 * 11,000 * 13,570 * 13,270 * 4,710 * 6,370 * 8,390 * 10,690 * 13,350 * 16,540 * 16,170 * 13,270 * 4,710 * 6,370 * 8,390 * 10,690 * 13,350 * 16,540 * 16,170 * 14,180 * 17,390 * 11,510 * 11,320 * 12,750 * 15,070 * 17,560 * 15,460 * 12,390 * 14,180 16,320 * 11,510 * 11,320 * 12,750 13,890 14,120 14,530 * 12,390 * 10,530 * 12,300 * 13,630 * 14,390 * 14,600 * 14,300 * 13,500 * 12,110 * 9,880 * 6,180 * 10,530 11,170 10,200 9,590 9,270 9,180 9,270 9,500 * 9,880 * 6,180 * 8,570 * 9,650 * 10,540 * 11,150 * 11,410 11,280 * 10,790 * 9,750 * 7,900 * 8,570 8,240 7,620 7,170 6,890 6,780 6,800 6,960 7,290 SK260LC 60ft Boom; 33'11", Arm; 27'1", Bucket; Less, Counterweight; 14,950 s, Shoe; 31.5" A 5' 10' 15' 20' 25' 30' 35' 40' 45' 50' 55' At Max. Reach B Radius 40' 35' 30' 25' * 2,300 * 2,300 * 3,340 * 3,340 * 3,790 * 3,790 * 2,680 * 2,680 * 3,930 * 3,930 * 3,460 * 3,460 * 2,120 * 2,120 * 2,060 * 2,060 * 2,040 * 2,040 * 2,050 * 2,050 45'5" 48'9" 51'5" 53'6" 20' * 4,290 * 4,290 * 4,140 * 4,140 * 4,030 * 4,030 * 2,110 * 2,110 * 2,090 * 2,090 55'0" 15' * 5,010 * 5,010 * 4,660 * 4,660 * 4,410 * 4,410 * 4,220 3,870 * 2,750 * 2,750 * 2,150 * 2,150 56'0" 10' * 7,370 * 7,370 * 6,310 * 6,310 * 5,590 * 5,590 * 5,080 * 5,080 * 4,710 4,540 * 4,440 3,690 * 3,200 3,000 * 2,250 * 2,250 56'7" 5' * 6,140 * 6,140* 15,970 * 15,970 * 11,140 * 11,140 * 8,660 * 8,660 * 7,170 * 7,170 * 6,200 * 6,200 * 5,530 5,240 * 5,040 4,280 * 4,670 3,510 * 3,480 2,880 * 2,380 * 2,380 56'9" GL * 5,470 * 5,470* 11,540 * 11,540 * 12,890 12,690 * 9,820 9,540 * 7,990 7,470 * 6,790 6,000 * 5,960 4,890 * 5,350 4,030 * 4,910 3,330 * 3,560 2,770 * 2,550 * 2,550 56'5" -5' * 4,800 * 4,800 * 6,380 * 6,380* 10,460 * 10,460 * 14,140 11,590* 10,760 8,750 * 8,680 6,900 * 7,310 5,580 * 6,350 4,590 * 5,650 3,810 * 5,120 3,180 * 3,310 2,670 * 2,780 2,610 55'8" -10' * 6,240 * 6,240 * 7,680 * 7,680* 10,990 * 10,990 * 14,910 10,960* 11,430 8,210 * 9,230 6,480 * 7,730 5,260 * 6,670 4,350 * 5,890 3,630 5,130 3,060 * 3,070 2,650 54'5" -15' * 7,710 * 7,710 * 9,170 * 9,170* 12,190 * 12,190 * 15,260 10,660* 11,830 7,900 * 9,590 6,210 * 8,030 5,040 * 6,900 4,180 5,870 3,510 5,060 2,990 * 3,480 2,760 52'8" -20' -25' * 9,230 * 9,230 * 10,800 * 10,800* 13,800 * 13,800 * 15,260 * 10,830 * 10,830 * 12,600 * 12,600* 15,760 * 15,760 * 14,920 10,600* 11,970 10,710* 11,820 7,780 * 9,750 7,800 * 9,690 6,070 * 8,180 6,070 * 8,140 4,930 4,910 6,830 6,830 4,090 4,090 5,820 5,850 3,460 * 4,480 3,490 2,980 * 4,040 * 4,880 2,950 3,260 50'4" 47'5" -30' * 12,540 * 12,540 * 14,590 * 14,590* 18,120 17,040 * 14,200 10,980* 11,360 7,970 * 9,360 6,180 * 7,860 5,000 * 6,660 4,190 * 5,860 3,750 43'8" -35' * 14,360 * 14,360 * 16,810 * 16,810* 16,810 * 16,810 * 13,020 11,420* 10,510 8,270 * 8,670 6,420 * 7,220 5,220 * 6,190 4,560 39'0" -40' * 14,240 * 14,240 * 11,190 * 11,190 * 9,070 8,740 * 7,410 6,820 * 6,550 6,070 32'10" * 6,670 * 7,360 * 8,050 * 8,660 * 9,090 8,870 8,760 8,770 * 7,910 * 6,060 * 6,670 6,820 6,350 5,940 5,620 5,400 5,300 5,310 5,450 5,770 * 3,890 * 4,790 * 5,380 * 5,700 * 6,090 * 6,540 * 7,000 * 7,400 7,330 7,170 7,100 7,130 * 6,270 * 3,890 * 4,790 * 5,380 * 5,700 5,620 5,330 5,020 4,740 4,520 4,370 4,300 4,330 4,490 * 3,150 * 4,330 * 5,120 * 5,670 * 5,960 * 6,250 6,210 6,060 5,960 5,930 * 4,160 * 3,150 * 4,330 4,580 4,420 4,230 4,030 3,850 3,700 3,610 3,590 3,670 * 2,790 * 3,770 * 4,430 * 4,880 * 5,020 * 4,580 * 3,050 * 2,790 3,500 3,390 3,270 3,160 3,080 * 3,050 * 2,460 * 2,260 * 2,150 * 2,100 * 2,090 * 2,110 * 2,180 * 2,290 * 2,440 * 2,650 * 2,960 * 3,400 * 4,070 * 5,210 * 5,570 * 4,670 * 2,460 * 2,260 * 2,150 * 2,100 * 2,090 * 2,110 * 2,180 * 2,290 * 2,440 * 2,650 * 2,960 3,270 3,660 4,320 5,520 * 4,670 Radius 33'7" 38'0" 41'5" 43'11" 45'9" 47'0" 47'8" 47'10" 47'5" 46'6" 45'0" 42'11" 40'0" 36'3" 31'2" 24'1" Notes: 1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities. 2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 3. Arm bucket pin is defined as lift point. 4. The above lifting capacities are in compliance with SAE J/ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load. 5. Operator should be fully acquainted with the Operator s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machines as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD. Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice. 22350 Merchants Way, Katy, Texas 77449 http://www.kobelco-usa.com/ Inquiries To: Bulletin No. SK210LC/SK260LC-10-LONG REACH-NA-101 2016020000E Printed in USA