VP-Series VP-10/1500 Vertical Machining Center http://www.twinhorn.com.tw
RIGID CONSTRUCTION INNOVATIVE DESIGN SUPERIOR PRODUCTIVITY All major parts are built with high tensile Meehanite cast iron, featuring long term wearing resistance and prolong positioning accuracy. Special head stock design with the most advanced weight distribution analysis technique provides best in line weight balance with counter weight stock which greatly reduced Z axis ballscrew loading during operation. Extra heavy duty wider span Y shape double wall column design provides best machining rigidity and positioning accuracy. All three axes box guide ways are heat treated, precisely scraped and ground. C3 class pre-tensioned high precision ballscrew direct link with servomotor on all three axes provides high positioning accuracy driven. ex VP-10 1
INNOVATIVE HEAD STOCK DESIGN 53.0 G Tri-angle design head stock provides best stability and flexibility on Z axis movement during operation. Floating tool clamp/unclamp system prevent spindle bearing from impacting during tool exchange. HIGH RIGIDITY BASE DESIGN Extra wide distance between guide ways design provides best stability and accurate operation. Advanced coolant and oil separated design prolongs coolant quality. All bearing housings are ground and precisely scrapped to provide higher accuracy and prolong ballscrews durability. VP-1500 model featured with steel roller bearing on supporting guide ways provides best combination of stability and flexibility during operation. ex VP-1500
HIGH MACHINING CAPACITY DESIGN SPINDLE 70 mm P class angular contact bearings and large span design largely promote the spindle rigidity and cutting ability. Special spindle nose design with Labyrinth and air curtain prevents coolant and chips damage. SPINDLE MOTOR TORSION DRAWING Fanuc 000rpm 150 0 135 7Nm 5% 1 0 15kW S3 5% 1 5 93Nm 0% 1 90 11kW S3 0% 75 0 Continuous 0% 5 15 1 0 15 5 00 1500 000 500 00 000 5000 000 Mitsubishi 000 rpm 000rpm 000rpm 0 0 95.5Nm 5% 0 90 1 15min S3 5% 7. 15min S3 5% 15kW 0 1 15kW S3 5% 70Nm 0% 70 1 0 0min 5 0min(7.5kW) 0 11kW S3 0% 50 50 0 0 3.7 Continuous 0% 0 0.5 7 9. 0 1500 3500 0 500 5000 7500 00 000 00 000 5000 000 7000 000 50 3750 50 750 000 000 rpm 70 000 rpm 1 1 7.3.5 0 0 5 1/H 93. 90 75 CONT 3.7 0 5 31.1 1. 15 9.9.7 0 1/H(11kW) CONT(7.5kW) 1 1.. 15 3375 750 1500 50 00 3750 500 550 000 0 70 0 1/H 1/H(11kW) 50 CONT 7.7 0 CONT(7.5kW). 3.3 0. 15.9 7. 5 0 1500 500 00 000 00 000 5000 000 7000 000 1 1 0 70 1 1 0 5 1/H 1/H(11kW) 50 CONT 7.7 0 CONT(7.5kW). 0. 1.7.7 5.9 0 175 55 50 500 3750 5000 50 7500 750 000 3
PULL STUD & TOOL SHANK DRAWING 0 Ø5 5 Tool shank BT50 90 M*P3 Ø9.5 7/ TAPER 1.0 3 139. 35 0 Ø5 Ø0 90 Ø3 MAS-P50T-1 50 5 5 Ø17 5 1 5 5 M*P3 Ø5 0 Ø.19 5.00.5 CAT50 1"-UNC Ø9.5 0.75" 0.5" 0 7/ TAPER 1.0 1.3" Ø9.5 Ø91.9 Ø9.3 31.75 90 ANSI CAT50 Ø.9 3. 5 Ø0. 5. 5. 3 Ø11. 1"-UNC Ø3 Tool shank BT0 MAS-P0T-1 CAT0 ANSI CAT0 TAPER 7/ 19 5/"-11UNC1 5 ø3. ø1. ø9. ø7.1 1. 11. 5/"-11UNC 19 5.5 3.1 MAC HINE FEATURE tools arm type ATC system (Standard) C h a i n t y p e c h i p conveyor (Optional) Chip flush system (Optional) Flush nozzles provide at both side of splash guard, efficiently remove chips during operation.
CUTTING ABILITY FACE MILLIN G Work piece material S50C END MILLING Work piece material S50C Spindle speed 90 RPM Spindle speed 00 RPM Feedrate 130 mm/min Feedrate 00 mm/min Cutting width 90 mm Cutting width mm Cutting depth 3 mm Cutting depth 5 mm Material elimination rate 373 cc/min Material elimination rate 5 cc/min WORK PIECE SAMPLE 5
DIMENSIONAL DRAWING Unit:mm VP Series (VP1500) 07 (VP10) 0 7.5 (VP1500) 7.5 (VP10) 17 (VP1500) 17 (VP10) 0 (VP1500) 0 (VP10) 9 (VP1500) 7.5 (VP10) 190 (VP1500) 3 (VP10) 35 (VP1500) 39 (VP10) VP Plus Series (Y-Axis travels 700mm) 1700 (VP-1500 + ) 175 (VP-10 + ) 791.5 (VP-1500 + ) 75 (VP-10 + ) 0 (VP-1500 + ) 30 (VP-10 + ) WORK TABLE DIMENSIONAL DRAWING 3 (VP-1500 + ) 315 (VP-10 + ) 155 (VP-1500 + ) 10 (VP-10 + ) 5 (VP-1500 + ) 350 (VP-10 + ) 935 (VP-1500 + ) 557 (VP-10 + ) Unit:mm 0 0 0 0 0 A 1 H 00(VP) 700(VP Plus) VP Series 1 00 (VP10) (VP1500) A 700 5 5 5 5 VP Plus Series A (1 : )
MACHINE SPECIFICATION VP-10 VP-10+ VP-1500 VP-1500+ TRAVELS X Axis 10 mm 1500 mm Y Axis 00 mm 700 mm 00 mm 700 mm Z Axis 00 mm Spindle Nose To Table Surface 150-750 mm Spindle Center To Column Front 0 mm Column Rail Face To Table Center 350-950 mm FEEDRATE Rapid Feedrate X & Y Axis 0 m/min 0 m/min 1 m/min 1 m/min Rapid Feedrate Z Axis 0 m/min 0 m/min 1 m/min 1 m/min Cutting Feedrate m/min m/min m/min m/min TABLE Table Size 00 x 00 mm 00 x 700 mm x 00 mm x 700 mm Max. Load Permissible 00 kgs T-Slot Number 5 T-Slot Pitch 0 mm (VP) / 5 mm (VP+) T-Slot Width 1 mm HEAD STOCK Spindle Speed 000 rpm Spindle Diameter Ø70 mm Spindle Taper BT-0 / CAT-0 Spindle Motor 11 / 15 kw (Fanuc), 7.5 / 11 kw (Mitsubishi) ATC Max. Tool Diameter(With Adj. Tool) Ø0 mm Max. Tool Diameter Ø5 mm Max. Tool Length 0 mm Max. Tool Weight 7 kgs GENERAL INFORMATION Machine Weight (Approx.) 00 kgs 90 kgs 9000 kgs 000 kgs Machine Height 7 mm 9 mm 7 mm 9 mm Floor Space (WxDxH) 3 x mm 30 x 50 mm 170 x 900 mm 0 x 935 mm Positioning 0.005 / 0 mm Repeatability 0.003 mm Air Pressure Required kgs/cm Remark Specification and design characteristics subject to change without prior notice. 103 TEL: 0-7333 STANDARD FEATURE OPTIONAL FEATURE Coolant system Enclosed splash guard Y axis Travels 700mm Chain type chip conveyor Arm type T ATC Leveling bolts and pads Spindle speed 000rpm with cart Rigid tapping Spindle air blast (BT-50) Spiral type chip conveyor Automatic Oil Lubricator Work air blast Spindle speed 000rpm with cart Work lamp RS-3 interface (BT-0) Transformer Heat exchanger for electrical Fanuc 0i-MD or Mitsubishi ZF Gear box CE Specification cabinet M70 Coolant through spindle Fanuc 31i-MB Automatic power off (M) with filter system Mitsubishi M700 series Remote MPG Wide range motor Siemens 0D SL / D / Adjustment tools & tool box th axis rotary table 0D SL CHI-FA MACHINERY MANUFACTURER CO., LTD. NO.- MING-CHUNG RD., SHENG KANG DIST., TAICHUNG CITY, TAIWAN TEL:+--577 FAX:+--51199 http://www.twinhorn.com.tw E-mail:chifaltd@ms3.hinet.net / inquiry@twinhorn.com.tw DISTRIBUTOR SOGITECH s.r.l. via J. F. Kennedy n.9 RODANO 0090 (MI) Tel. 0.95.35.1.39 commerciale@sogitechsrl.com www.sogitechsrl.com Agente di zona: UMA S.r.l. Tel. 051.3..709 info@uma.it