VX series and L Gas Forklift Trucks 8,kg /,kg Intellix Vehicle Management System CANbus technology Techtronix 332 Series transmission Brakes AccuTouchTM Mini Lever Module Onboard Diagnostics
Truck Dimensions Ast = Wa + R + a = Wa +(( l + x) 2 + (b12/2 b13) 2 + a a 2 1mm Ast 4.33/4.34 Wa 4.3 b2 4.21 b1 4.21 b13 4.3 x 1.8 1mm a 2 1 12 4.2 a 4.1 b h4 4. h 4.7 h3 4.4 h1 4.2 h2 4.3 h7 4.8 h2 4.3 h1 4.12 s 4.22 m1 4.31 x 1.8 m2 4.32 y 1. l 4.22 l2 4.2 l1 4.1 2 VX series
GD/GL 8VX Dual Drive mast details and capacity ratings (kg) neumatic tyres Model Tyre size, front Overall width, front Mast h 1 h 2 +s h 3 h 4 Tilt F B GD/GL 8VX Dual Drive Wheel Dual Drive Wheel Dual Drive Wheel with carriage with carriage + sideshift with carriage + sideshifting fork positioner mm Load Centre (kg) mm Load Centre (kg) mm Load Centre (kg) Capacity at max. height (kg) Capacity to lift height (kg to mm) 2 Stage 3 Stage 2712 22 342 32 4212 272 32 312 1 18 21 3 3 4 41 1 422 472 72 72 722 2 82 732 771 74 to 81 to 1 78 77 74 72 724 7 74 748 71 to 81 73 to 1 73 72 7 747 72 73 71 74 74 to 81 7 to 1 GD/GL 8VX Dual Drive mast details and capacity ratings (kg) neumatic tyres Model Tyre size, front Overall width, front Mast h 1 h 2 +s h 3 h 4 Tilt F B GD/GL 8VX Dual Drive Wheel Dual Drive Wheel Dual Drive Wheel with carriage with carriage + sideshift with carriage + sideshifting fork positioner mm Load Centre (kg) mm Load Centre (kg) mm Load Centre (kg) Capacity at max. height (kg) Capacity to lift height (kg to mm) 2 Stage 3 Stage 2712 22 342 32 4212 272 32 312 14 17 18 3 3 4 41 1 438 488 88 88 738 2 82 732 72 777 777 7 to 2 to 2 to 3 to 3 78 7 73 742 727 7 732 718 7 to 2 748 to 2 73 to 41 71 to 41 7 73 7 73 724 73 72 71 74 to 2 744 to 2 7 to 1 748 to 41 GD/GL VX Dual Drive mast details and capacity ratings (kg) neumatic tyres Model Tyre size, front Overall width, front Mast h 1 h 2 +s h 3 h 4 Tilt F B GD/GL VX Dual Drive Wheel Dual Drive Wheel Dual Drive Wheel with carriage with carriage + sideshift with carriage + sideshifting fork positioner mm Load Centre (kg) mm Load Centre (kg) mm Load Centre (kg) Capacity at max. height (kg) Capacity to lift height (kg to mm) 2 Stage 3 Stage 2712 22 342 32 4212 272 32 312 1 18 21 3 3 4 41 1 422 472 72 72 722 2 82 732 872 812 883 83 to 31 to 31 to 3 to 3 8 84 847 81 72 8 832 781 84 to 31 844 to 31 848 to 3 847 to 3 84 844 842 814 77 847 82 778 84 to 31 83 to 31 84 to 3 843 to 3 Rated Load vs. Load Center Rated Load (kg) Truck Configuration 2stage F8 mast at HNHL (mm MFH) 8VX models. 2stage F8 mast at HNHL (31mm MFH) VX models. 2stage F mast at HNHL (mm MFH) 8VX models. 23mm STANDARD HOOK CARRIAGE WITH LOAD BACKREST Basic Truck: DSL with 3speed basic transmission and Overhead Guard solid neumatic tyres. The ratings are computed using fork lengths as below: All models Load Centre to 7 12 Over 7 to 1 1 Over 1 to 12 18 Over 122 24 Fork length Note: Special forks with higher load ratings are required to obtain full truck ratings on load centers greater than 1mm on GD/GL 8VX and greater than 13mm on GD/ GL VX. Standard mm Load Centre Load Centre Optional mm Load Centre 3
Distinguishing mark Weights Tyres/chassis Dimensions erformance data Combustionengine Addition data VDI 218 General Specifications 1.1 1.2 1.3 1.4 1. 1. 1.8 1. 2.1 2.2 2.3 3.1 3.2 3.3 3. 3. 3.7 4.1 4.2 4.3 4.4 4. 4.7 4.7.1 4.8 4.12 4.1 4.2 4.21 4.22 4.23 4.24 4.31 4.32 4.34.1 4.34.2 4.3 4.3 4.41 4.42 4.43.1.2.3..7.1 7.1 7.2 7.3 7.4 7. 8.1 1.1 1.2 1.3 1.4 1.7 1.7.2 1.8 Manufacturer (abbreviation) Manufacturer s type designation Engine/Transmission Model Brake Type Drive: electric (battery or mains), diesel, petrol, fuel gas Operator type: hand, pedestrian, standing, seated, orderpicker Rated capacity / rated load Load centre distance Load distance, centre of drive axle to fork Wheelbase Service weight Axle loading, laden front / rear Axle loading, unladen front / rear Tyres: = pneumatic, C = cushion, SE = superelastic Tyre size, front Tyre size, rear Number of wheels, front/rear (x = driven wheels) Tread, front Tread, rear Tilt of mast/fork carrige, forward / backward β Height, mast lowered Free lift s Lift s Height, mast extended : Height of overhead guard (cabin) m Cab height (open cab) Seat height relating to SI/stand height 8 Coupling height Overall length Length to face of forks Overall width Fork dimensions DIN ISO 2331 Fork carriage ISO 2328, class/type A, B Fork carriage width w Ground clearance, laden, below mast Ground clearance, centre of wheelbase Aisle width with pallets 1mm long x 12mm wide Aisle width with pallets 8mm wide x 12mm long Turning radius Internal turning radius intersecting aisle (With pallet W = 12mm, L = 1mm) Step Height (from ground to running board) Step Height (between intermediate steps between running board and floor) Travel speed laden/unladen Stage IIIA diesel engine Stage IIIB diesel engine Lift speed, laden/unladen (2 ) Lowering speed, laden/unladen (2) Drawbar pull, laden/unladen @ 1. km/h Stage IIIA diesel engine Stage IIIB diesel engine Gradeability, laden/unladen @ 1. km/h Stage IIIA diesel engine Stage IIIB diesel engine Service brake Engine manufacturer/type Engine power according to ISO18 Rated speed at max. power Number of cylinders/displacement Fuel consumption according VDI cycle Type of drive unit Operating pressure for attachments (nominal relief pressure) Oil volume for attachments (nominal) oil tank, capacity (drain & refill) Fuel tank, capacity () Sound pressure level at the driver s seat (without / with cab) H Guaranteed sound power 21/14/EC Towing coupling, type DIN H Measured according to the test cycles and based on the weighting values contained in EN123. Variable s Bottom of Forks / Top of forks 8 Full suspension seat in depressed position w Add mm with load backrest Q (t) c x y kg kg kg b1 b11 α / β (o) h1 h2 h3 h4 h h7 h1 l1 l2 b1/b2 s/e/l b3 m1 m2 Ast Ast Wa b13 km/h km/h km/h m/s m/s kn kn kn % % % kw rpm cm3 l/hr bar l/min l l db(a) db GD 8 VX Cummins 3.3L Techtronix 332 Base 8. 13. 24 112 1741 / 1844 43 / 8 8.2x1 14R1 8.2x1 14R1 13. / 2 32L / 72 231 24 14 47. 38. 223 x 2 x 12 23 48. 8. 373 34 2.43 /.4 3.4 / 32.2 2. / 3. Cummins QSB3.3 82 @ 24 243 4 /.4 1 3 7. 7 / 7 1 in m h subject to +/ mm tolerance. 24mm for Cab option. : Without load backrest. GD 8 VX Kubota 3.8L Techtronix 332 Cummins 3.3L / Techtronix 332+ Techtronix 332 Value / roductivity Base 8. 8. 4. 13. 24 24 112 121 1741 / 1844 18418 / 171 43 / 8 31 / 8 8.2x1 14R1 8.2x1 14R1 8.2x1 14R1 8.2x1 14R1 13. 13. / 2 / 2 32 342 / 4 / 4 72 88 231 231 24 24 14 14 47 47. 238 38. 48 223 223 x 2 x 12 x 2 x 18 23 23 48. 8. 8. 88. 373 374 34 31 2 2.43 /.4 3.4 / 32.2 2. / 3. Kubota 3.8L 82 @ 24 24 4 / 37.1 1 3 7. 7 / 7 1 in GD 8 VX.43 /.4 3.4 / 3. 28.1 / 2. Cummins QSB3.3 82 @ 24 243 4 /.8 1 3 7. 7 / 7 1 in Spec sheet 8VX truck based on : mm Bottom of Forks / mm Top of Forks F8 2 stage mast with 23mm standard carriage, 12mm forks. 4 VX series
GD 8 VX Kubota 3.8L Techtronix 332 Cummins 3.3L / Techtronix 332+ Techtronix 332 Value / roductivity Base 8.. 4. 13. 24 24 121 1124 18418 / 171 1872 / 17 31 / 8 34 / 424 8.2x1 14R1 8.2x1 14R1 8.2x1 14R1 8.2x1 14R1 13. 13. / 2 / 2 342 342 4 / 4 4 / 4 88 72 231 231 24 24 14 14 47 47 238 18.1 48 38.1 223 223 x 2 x 18 x 2 x 12 23 23 8. 3. 88. 73. 374 3723 31 374 2 2.42 /.4 3.4 / 3. 28.1 / 2. Kubota 3.8L 82 @ 24 24 4 / 37.4 1 3 7. 7 / 7 1 in GD VX.42 /.4 3.4 / 31.4 27.2 / 28.4 Spec sheet 8VX truck based on : 4mm Bottom of Forks / 4mm Top of Forks F 2 stage mast with 23mm standard carriage, 18mm forks. Cummins QSB3.3 82 @ 24 243 4 / 1.4 1 3 7. 7 / 7 1 in GD VX Kubota 3.8L Techtronix 332 GM.7L Techtronix 332 / Techtronix 332+ / Techtronix 332+ Value / roductivity Value / roductivity LG. 8. 13. 13. 24 24 1124 1134 1872 / 17 17434 / 17 34 / 424 471 / 8 8.2x1 14R1 8.2x1 14R1 8.2x1 14R1 8.2x1 14R1 13. 13. / 2 / 2 342 32 4 / 4 / 72 72 231 231 24 24 14 14 47 47 18.1. 38.1 38. 223 223 x 2 x 12 x 2 x 12 23 23 3. 48. 73. 8. 3723 373 374 34 2 2 22. / 23..42 /.4 3.4 / 3. 27.2 / 28.4 Kubota 3.8L 82 @ 24 24 4 / 37.8 1 3 7. 7 / 7 1 in Spec sheet VX truck based on : 4mm Bottom of Forks / 4mm Top of Forks F8 2 stage mast with 23mm standard carriage, 12mm forks. GL 8 VX.3 /.42 3 / 32 3 / 31 GM.7L 7 @ 24 24 8 / 73 1.8 / 1.1 1 3 7. 82 / 7 17 in GL 8 VX GM.7L Techtronix 332 / Techtronix 332+ Value / roductivity LG 8. 4. 24 122 1843 / 1814 328 / 22 8.2x1 14R1 8.2x1 14R1 13. / 2 342 4 / 4 72 231 24 14 47 238 48 223 x 2 x 18 23 8. 88. 374 31 2 22. / 23..3 /.44 3 / 31 28 / 27 GM.7L 7 @ 24 24 8 / 73 2.8 / 1. 1 3 7. 82 / 7 17 in Notes: 1 Other tyre options are available 2 Backtilt limited to with some mast options 3 Carriage is 23mm wide, load backrest is 28mm wide. GL VX 1.1 1.2 GM.7L Techtronix 332 / Techtronix 332+ Value / roductivity LG 1.3 1.4. 1. 1. 13. 1.8 24 1. 117 2.1 184 / 241 2.2 2 / 4 2.3 3.1 8.2x1 14R1 3.2 8.2x1 14R1 3.3 3. 3. 13. 3.7 / 2 4.1 342 4.2 4.3 4 / 4 4.4 72 4. 231 4.7 24 4.7.1 14 4.8 47 4.12 18.1 4.1 38.1 4.2 223 4.21 x 2 x 12 4.22 4.23 4.24 4.31 23 4.32 3. 4.34.1 73. 4.34.2 3723 4.3 4.3 374 4.41 4.42 2 4.43 22. / 23..1.3 /.42 3 / 31 27 / 28 GM.7L 7 @ 24 24 8 / 73 2.8 / 1. 1 3 7. 82 / 7 17 in.2.3..7.1 7.1 7.2 7.3 7.4 7. 8.1 1.1 1.2 1.3 1.4 1.7 1.7.2 1.8 Distinguishing mark Weights Tyres/chassis Dimensions erformance data Combustionengine Addition data
VX series Veracitor VX Series This series of trucks is designed to provide excellent performance and is optimized for lowest hourly cost of operation. An active regenerating particulate filter significantly reduces the number of services interventions. DF performance is constantly monitored and displayed on supplemental display at operator eye level. Engines The Veracitor Cummins QSB3.3L diesel turbo charged engine featuring legendary Cummins reliability is offered for the Veracitor Base model and is available for unregulated markets. The Veracitot Value and roductivity models feature new Stage IIIB compatible Kubota V38 E4 3.8L diesel engine or GM.7L V8 LG engine for regulated markets. Low emission engines form Kubota The Stage IIIB Kubota V38 E4 3.8L (82 kw @ 22rpm) diesel engine meets the stringent emissions regulations by using a number of technologies including cooled exhaust gas recirculation, charge air cooling and an active regenerating particulate filter (DF) which reduces soot levels by % to.2g/kwh. Stage IIIB = High productivity and low emissions. You can recognize a low emission trucks by the Stage IIIB symbol. NOTE: A Stage IIIB engine must run on Ultra Low Sulphur (ULSD) fuel, with a maximum of 1 ppm sulphur content. fuel with a higher sulphur content than 1ppm will compromise the emissions performance of the Stage IIIB engine and may result in damage to components. LG Engines The Veracitor VX GM Vortec TM V8 engine features a rigid cast iron block and main bearing caps. The Nodular iron crankshaft is supported on four main bearings with a cast iron camshaft. valve lifters are utilized to eliminate the need for manual adjustment. The GM engines also feature an electronic throttle for precise performance and control. Fuel System The GM LG engine uses a mixer system. The system uses a vaporizer built into the electronic pressure Engine Specifications LG Engine Engine Cylinders Displacement ower Torque GM V8.7 litre 8 kw @ 2,4rpm 422 Nm @ 1,rpm Stage IIIA Engine Engine Cummins Cylinders Inline 4 Displacement 3.3 litre ower 82 kw @ 2,4rpm Torque 41 Nm @ 1,4rpm Stage IIIB Engine Engine Kubota Cylinders Inline 4 Displacement 3.8 litre ower 82 kw @ 2,4rpm Torque 371 Nm @ 1,4rpm regulator to convert the fuel from a liquid to a gas and then precisely deliver the proper amount to the mixer via the electronic pressure regulator. An electronic throttle body regulates the fuel/air mixture to the intake manifold. The Engine Control Unit controls the electronic throttle body, electronic pressure regulator and spark advance to provide the necessary torque. The Engine Control Unit s inputs include manifold absolute pressure, intake air temperature, engine coolant temperature, engine oil pressure, accelerator pedal position, throttle position, engine speed, camshaft position, plus pre and post catalyst oxygen sensor signals. Transmissions Techtronix 332 transmission The standard Techtronix 332 transmission features three speeds forward and two speeds in reverse for excellent gradeability and drawbar pull while allowing top travel speeds for maximum productivity. First gear also offers increased drawbar pull for use on gradients. Whilst second and third gears provide maximum engine efficiency in applications where longer travel distances are common. Auto Deceleration (ADS) This is achieved through the controlled application of the clutch packs to slow the truck down without the need to apply the foot brake. Controlled ower Reversal (CR) Tyre spin is significantly reduced by precisely regulating engine speed during full power reversal situations. Tyre wear is proportionally decreased, reducing the number of replacement tyres required. Controlled Roll Back (CRB) Roll back on gradients is limited to 7mm per second making load spotting and discharging of loads on ramps and gradients easier and more efficient. Techronix 332+ Transmission The Techtronix 332+ has all the standard Techtronix 332 transmission features plus Dynamic Auto Deceleration System (DADS) and Auto Speed s (ASH) with Automatic Inching Control which automatically increases engine RM as hydraulic functions are actuated, while maintaining control over vehicle speed. The Throttle Response Management feature (TRM) provides travel speed as a direct result of pedal position, improving truck control. A 1 mesh suction and 1 micron return line filtration system protect the transmission from abrasive contaminants. AutoSpeed s (ASH) with Automatic Inching Control When lifting a load, the engine speed is automatically increased to provide full hydraulic power. The Intelix VSM maintains the travel speed (or prevents travel) until the operator activates the accelerator. No operator inching is required and productivity is increased by simplifying operator actions. Throttle Response Management (TRM) This feature allows the operator to manage his travel speed, according to the position of his foot on the accelerator pedal. For example, travel speed can be maintained both on the level and on a gradient, without the need to depress the pedal further. The system also compensates for hydraulic operation and drawbar pull. Dynamic Auto Deceleration System (DADS) This allows the operator to reduce the speed of the truck without using the brake. The rate of braking is VX series
determined by the programmable dashboard settings 11. The rate of deceleration can be controlled further by the rate at which the operator releases his foot from the accelerator pedal. The transmission also features electronic shift control, smooth electronic inching, neutral start switch, and antirestart protection. A single pedal controls both inching and braking. Optional dual inch/brake pedals are available for operators who prefer this design. Cooling System The modular radiator system incorporates sections for engine coolant, transmission oil and engine intake air. A mm diameter blade pushertype fan provides cooling airflow. A permanently lubricated water pump and a high capacity, crossflow radiator ensure rapid heat dissipation. The sealed cooling system operates at a pressure of 1. bar and includes a coolant recovery tank for visual inspection of coolant level. The radiator is softmounted for durability. Drive Axle The drive axles are designed to withstand heavy loads and absorb shocks. The wheel hubs rotate on large tapered roller bearings. The drive shaft transmits rotational torque to the drive axle from the engine and transmission. Transmission torque is distributed through planetary gear reduction and an industrial hypoid ring gear and pinion differential assembly. The drive axle is a self contained assembly that is isolated from the transmission by the drive shaft and heavyduty rubber isolators. The axle shafts utilise a rolled fillet root spline design for increased resistance to torsion stress. A magnetic sump plug is used to collect any metal particles that are circulating in the axle oil, preventing component wear. Brakes Oil immersed disc brakes are standard and internal to the axle for environmental protection. The low pedal effort brakes require no adjustment and very little maintenance, yet provide an extremely long service life. Metered hydraulic oil pressure is used to actuate the oil immersed disc brakes via a brakepedal actuated modulating valve. This system yields consistent pedal travel for optimum control. The independent, hand adjustable parking brake with pushbutton release has an audible alarm to indicate when the operator has left the truck without applying the park brake. Steering ower Steering (hydrostatic steering) provides responsive control and eliminates mechanical linkages for reduced surface shock and simplified maintenance. The steering wheel is 3cm in diameter with a textured surface grip and spinner knob, and requires only four turns locktolock. The center mounted steer cylinder is located within the confines of the steer axle for protection. Steer Axle The steer axle is constructed of cast ductile steel and is mounted on phenolic bushings, allowing excellent stability and axle articulation. The steer axle system features tapered spindle bearings and nonadjustable tie rod end for durability. Chassis The chassis designed by stateoftheart finite element methods features 2mm thick frame members and contains a rugged, unitised frame structure with a low step for simple entrance to the operator s compartment. The ergonomically designed overhead guard is bar type for excellent visibility and reduced noise. Gull wing doors on both right and left sides provide excellent access. Operator s Compartment The operator s compartment features AccuTouch TM minilever electrohydraulic controls integrated into the operator s rightside armrest providing superior ergonomics. The automotivestyle pedal arrangement has a large, single inch/brake pedal as standard. Rubber floor mats reduce noise and vibration. The floorplate can be removed without tools for excellent service access. Low step height and convenient hand grips provide easy entry and exit to and from the truck and superior reverse driving position. Intellix Vehicle System Manager This is the master truck controller, providing extensive monitoring and control of truck functions and systems. CANbus technology reduces wiring complexity and enables comprehensive communications between truck systems. The ergonomically positioned dash display transmits continual feedback to the operator and allows for communication of service codes. Comprehensive onboard diagnostics enable quick and easy troubleshooting. The electrical system features sealed connectors and Hall Effect sensors for superior dependability. System The hydraulic system incorporates a gear type pump with a cast iron body for quiet efficiency. The system is protected from overloads by a main relief valve for the lift circuit and a secondary relief valve for tilt and auxiliary functions. Oil is double filtered through a 1 mesh suction line strainer and 1 micron return line filter. The hydraulic tank is integrated into the frame. An emergency lowering valve is provided to allow the load to be lowered in the event of power loss. Oring face seal fittings are used in all high pressure hydraulic connections. Masts Simplex (Limited Free Lift) and Triplex FFL (Full Free Lift) masts are available. The mast features prelubed and sealed full radius load rollers that resist forward, rearward and lateral forces. Sidethrust wear pads allow for periodic adjustment for lateral clearances. The rolled mast channels are made of high strength steel to provide resistance to flaring of the mast channel. Wide (2.3m) hooktype 7
VX series Models: GD/GL 8VX, 8VX, VX carriages are standard equipment, providing great visibility and the fitting of a wide variety of forks and attachments. intype carriages are also available. Options l owertrain protection system with engine shutdown l remium monitoring package l Sideshifting fork positioner l Accumulator l Keyless start (with auxillary key switch) l LED brake and reversing lights l Headlights and rear drive lights with halogen bulbs l Headlights and rear drive lights with LED bulbs l Traction speed limiter l Returntoset tilt l Integral operator s cab l Swivel full suspension vinyl and cloth seats l Foot directional control pedal l Impact monitor l Operator password l Alarm reverse actuated 8212 db(a) self adjusting l LED amber strobe light keyswitch activated l Solid and radial tyres l 4 function (2 aux.) hydraulic control valve l forward/ backward tilt l Fire extinguisher l Lifting eyes HYSTERYALE UK LIMITED trading as Europe Materials Handling Centennial House, Frimley Business ark, Frimley, Surrey GU1 7SG, United Kingdom. Tel: +44 () 127 38 Fax: +44 () 127 38 www.yaleforklifts.eu ublication part no. 28 Rev.8 rinted in The Netherlands (21HG) EN. Safety. This truck conforms to the current EU requirements. Specification is subject to change without notice., VERACITOR and are registered trademarks. EOLE, RODUCTS, RODUCTIVITY, REMIER, HiVis, and CSS are trademarks in the United States and certain other jurisdictions. MATERIALS HANDLING CENTRAL and MATERIAL HANDLING CENTRAL are Service Marks in the United States and certain other jurisdictions. is a Registered Copyright. Europe Materials Handling 21. All rights reserved. Truck shown with optional equipment. Country of Registration: England and Wales. Company Registration Number: 2377