V.1.9-201408
- Our accessories are made of premium quality 304 stainless steel grade with non-corrosive and non-magnetic properties. - Our Fenders are made of 430 stainless steel grade using stamping or rolling process for the best preformance in the industry. - Our lights are guaranteed for one (1) year. See our lights & accessories catalogue for details. 1. 2. 3. 4. 5. 6. 7. 1. 2. 3. 4. 5. 1. 2. 3. 4. 5. 1. 2. 1. 2. 3. 1. 2. 3. 4. 5. Fender and mounting kit warranty One (1) year warranty on parts. Metchro Products Inc. will replace defective parts with new parts and will incur responsability of shipping the replacements parts. 2.1 Cost of labour will be paid consistend to a predetermined amount for the warranted part that is set by Metchro Inc. Chrome and zinc components are not under warranty due to the hard environments they are exposed to. Warranty will only be granted if the fender is properly installed using the Metchro mounting kit. Warranty does not cover damages due to accidents, abuses, mishandling of the parts, improper storage, improper installation or misusage. Metchro Inc. is not and will not be held responsible for any damage or violations that may occur to the vehicle on which a Metchro part is installed. This includes, but is not limited to, paint damage, body damage and law infractions. It is solely the responsability of the client to ensure that the part is conforming to the vehicles specifications and other laws to which the vehicle must abide. This warranty is applicable only to the original purchaser. Truck accessories warranty Metchro products, excluding electrical components, are under warranty against defects in material or manship work for one (1) year from date of installation. Warranty does not cover any labour cost or damages due to accidents, abuses, mishandling of the parts, improper storage, improper installation or misusage. Parts with multiple components, only the defective component will be replaced. This warranty is applicable only to the original purchaser Metchro Inc. is not and will not be held responsible for any damage or violations that may occur to the vehicle on which a Metchro part is installed. This includes, but is not limited to, paint damage, body damage and law infractions. It is solely the responsibility of the client to ensure that the part is conforming to the vehicles specifications and other laws to which the vehicle must abide. All invoices will be for a minimum of 100$. All claims for shortage must be made within 10 days of receiving the product. All products are F.O.B. St-Hyacinthe, Québec. Terms are net 30 days. All applicable taxes and charges are in extra to price list. Sales policies Warranty All returns and warranty claims must be done with the Metchro s consent and must have an authorization number. Defective parts must be accompanied with a filled out claim form, the sales invoice and 4 pictures : - Picture of the entire truck - Picture to see the installation hardware - Picture of the problem - Picture proving that the rubber inslators were properly installed (Fenders only) All products returned for credit will be subject to a 15% restocking charge. All products must be returned by prepaid freight. All products must be returned in its original package and in a resalable condition. Return policy SURFACE PREPARATION PROCEDURE FOR STICKING 3M ADHESIVE TAPE IMPORTANT NOTICE : DO NOT USE BRAKE CLEANER TO CLEAN SURFACE The truck should be in a environment having an ambient temperature of 15 to 30 degrees C. Get the surface well cleaned with soapy water. Completely dry the surface. Take a clean piece of cloth (no tissue papers), generously dip in isopropyl alchohol and clean the surface untill there is no firt on the cloth. Let the surface dry out (maximum 5 minutes). Stick the accessory onto the cleaned surface very carefully and press the accessory on the surface with hands. (the accessory will stick instantly). Let the accessory dry for 24 hours for maximum adhesion, before putting the truck in service.
FENDER AND MOUNTING KITS - Mounting hardware - Quarter fenders - Tandem ( half ) fenders - Full fenders - Round fenders FRAME AND FAIRING ACCESSORIES - Air line box - Center back panel - Mud flap hanger - Rear frame cover - Step cover - 5th wheel ramp Metchro Catalogue Index CAB & SLEEPER ACCESSORIES - Bagage door trim - Handle trim - Sleeper panel - Sleeper extension panel - Window trim - Cab panel DAY CAB ACCESSORIES - Dual light panel - Air cleaner bar - Cowl panel - Mirror light bar - Sun visor & visor trim - Window Deflector HOOD & GRILL ACCESSORIES - Air intake light, fairing & trim - Bug deflector & shield - Fender trim & guard - Front grill - Hood panel - Logo panel - Side deflector BUMPER ACCESSORIES - Bumper light bar - Licence plate holder - Foot panel - Bumper insert KNOWING METCHRO S 7000 SERIES NUMBERING SYSTEM Each digit gives important information about the part (accessories only) The S prefix means that the product is made with a highly polished stainless steel (304-X10). The same part number without the S prefix will result in a product made with the standard stainless steel (430BA) This digit represents a custom truck accessory This digit represents the truck s make : 0 = Caterpillar 1 = Peterbilt 2 = Kenworth 3 = Freightliner 4 = International 5 = Western Star This digits represents the location on the truck where the part is mounted : 1 = Bumper accessories 2 = Hood & grill accessories 3 = Cab (outside) accessories 4 = Cab (inside) accessories 5 = Sleeper accessories 6 = Mack 7 = Volvo 8 = Sterling 9 = Universal part that fits most makes and models 6 = Side fairing accessories 7 = Frame accessories 8 = Trailer accessories 9 = Wheel accessories K = Multiple location kit Suffix represents the type of lighting that will be used on the product : LED = LEDB = LED with bezel LEDCA = Clear lense with amber LED LEDCAB = Clear lense = with amber LED and bezel LEDCR = LEDCRB = S = G = P = R = LED no bezel Clear lense with red LED Clear lense with red LED and bezel Made of stainless steel Made of galvanized Powder coated Reflective tape These 3 digits identify the part itself This digit represents how the part is sold : 1 = As a single unit (UN) 2 = As a pair (PR) 3 = As a kit (KIT)
BUMPER ACCESSORIES BUMPERS ACCESSORIES Licence plate holder with hinges / Chrome licence frame(s) included LICENCE PLATE HOLDER S7911137 (50 ) S7911133-LED (56.75 ) S7911136 (37.75 ) S7911135 (25.25 ) Bottom mounting licence plate holder S7911132-LED (44.5 ) S7911131-LED (32.25 ) S7911134 (13.125 ) S7911028 S7911130-LED (20 ) LIGHT BAR 7911001-LED (9.5 ) 7911012-LED (38 ) 7911013-LED (9.5 ) 7911008-LED (42 ) 7911002-LED (19 ) 7911011-LED (28.5 ) 7911014-LED (19 ) 7911007-LED (30 ) 7911003-LED (28.5 ) 7911010-LED (19 ) 7911015-LED (28.5 ) 7911006-LED (19.5 ) 7911004-LED (38 ) 7911009-LED (9.5 ) 7911016-LED (38 ) 7911005-LED (9.75 ) 1 The following suffix represents the type of light that will be used on the product, price will vary accordingly: LED = LED no bezel - LEDB = LED with bezel - LEDCA = Clear lense with amber LED FGA=Flatline 4 lines led FGCA=Flatline 14 lines clear LED FGA= Flatline 1 line LED FGCA= Flatline 1 line clear LED LEDCAB = Clear lense with amber LED and bezel - LEDCR = Clear lense with red LED - LEDCRB = Clear lense with amber LED and bezel
BUMPER LIGHT BAR UNIVERSAL MODELS - 85.5 LONG BUMPER ACCESSORIES BUMPER LIGHT BAR 7911017-LED 7911018-LED 7911019-LED BUMPER LIGHT BAR FOR TEXAS BUMPER - 94.5 LONG S7911029-LED S7911020-LED S7911021-LED S7911022-LED S7911120-LED S7911121-LED S7911122-LED S7911125-LED S7911144-LED S7911146-LED The following suffix represents the type of light that will be used on the product, price will vary accordingly: LED = LED no bezel - LEDB = LED with bezel - LEDCA = Clear lense with amber LED FGA=Flatline 4 lines led FGCA=Flatline 14 lines clear LED FGA= Flatline 1 line LED FGCA= Flatline 1 line clear LED LEDCAB = Clear lense with amber LED and bezel - LEDCR = Clear lense with red LED - LEDCRB = Clear lense with amber LED and bezel FRONT GRILL 2
HOOD AND GRILL ACCESSORIES HOODSHIELD 07/2015-01 S7521001 S7521006 S7521002 S7521005 S7521003 4700 SB & SF - 2012 & UP 4800 SB & TS - 2011 & UP 4900 FA & EX - 1993 & 2010 4900 CO - 1993 & 2010 4900 SA - ALL YEARS HIGH VISION HOOD - 1993 & UP S7521005 S7521003 S7521001 S7521002 S7521003 S7521003 Hood Deflector Hood Deflector Hood Deflector Hood Deflector Hood Deflector Hood Deflector 5700 2016 & UP S7521006 Hood Deflecteo 3 FRONT GRILL
HOOD AND GRILL ACCESSORIES DEFLECTOR & FENDER GUARD 30/2017-05 S7522001 S7522003 S7522004 S7522005 S7522006 S7522007 S7522008 S7522010 4700 SB - 2012 & UP 4800 SA - 2010 & UP 4900 SA - 2010 & UP 4900 SA - 2010 & UP 4900 FA - ALL YEARS 4900 FA - 2014 & UP Constellation & 4900 EX long hood1996 TO 2013 - ALL YEARS S7522008 S7522007 S7522003 S7522006 S7522010 S7522005 S7522001 S7522004 Front fender guard (PR) Front fender guard (PR) Hood side deflector (PR) Front light trim (PR) Hood side deflector (PR) Front fender guard (PR) Front fender guard (PR) Logo trim (PR) FRONT GRILL 4
HOOD AND GRILL ACCESSORIES HOOD & GRILL ACCESSORIES LOWER HOOD PANEL S7522002 CONSTELLATION - 1999 & UP S7522002 Lower hood panel (PR) HOOD GRILL TRIM S7521004 4700 SB - 2012 & UP S7521004 hood grill trim AIR FILTER STAR R-AFS05-05B 5 inch filter Use for Vortox filter R-AFS05-05G 5 inch filter Use for Vortox filter R-AFS05-05R 5 inch filter Use for Vortox filter R-AFS05-05Y 5 inch filter Use for Vortox filter R-AFS05-05W 5 inch filter Use for Vortox filter R-AFS7.5B 7.5 inch filter Use for Donaldson filter R-AFS7.5G 7.5 inch filter Use for Donaldson filter R-AFS7.5R 7.5 inch filter Use for Donaldson filter R-AFS7.5Y 7.5 inch filter Use for Donaldson filter See 3M tape surface preparation procedure on the warranty page R-AFS7.5W 7.5 inch filter Use for Donaldson filter 5 FRONT GRILL
CAB & SLEEPER ACCESSORIES 13 ½ DROP SUN VISOR 07/2017-07 FLAT TOP - MID ROOF - DAY CAB S7531007 S7531502 S7531014 VALID IN CDN - MIRROR ON CAB S7531007 Sun visors (13 1/2 DROP) 4700 SB 2015 & UP S7531502 Center outside windshield bar. - MIRROR ON CAB S7531014 Sun visors (7 1/2 DROP) ULTRA HIGH ROOF S7531004 S7531013 S7531015 S7531010 STRATOSPHERE-4900 SF - MIRROR ON CAB - 2012 & UP S7531004 Sun visors (13 1/2 DROP) STRATOSPHERE-4900 SF - MIRROR ON DOOR S7531010 Sun visors (13 1/2 DROP) STRATOSPHERE-4900 SF - MIRROR ON CAB - 2012 & UP S7531013 Sun visors (9 DROP) STRATOSPHERE-4900 SF - MIRROR ON DOOR - 2012 & UP S7531015 Sun visors (9.5 DROP) 6
CAB & SLEEPER ACCESSORIES 15 DROP SUN VISOR 07/2015-01 GANGSTER SERIE - FLAT TOP 13.6 S7531002 S7531001-LED S7531003-LEDB CONSTELLATION - 1998 & UP LOW MAX & STRATOSPHERE MIRROR ON DOOR S7531001-LED S7531002 S7531003-LEDB Sun visors (13.6 DROP) (OVAL LIGHTS) Sun visors (13.6 DROP) (BLANK) Sun visors (13.6 DROP) (ROUND LIGHTS) The following suffix represents the type of light that will be used on the product, price will vary accordingly: LED = LED no bezel - LEDB = LED with bezel - LEDCA = Clear lense with amber LED FGA=Flatline 4 lines led FGCA=Flatline 14 lines clear LED FGA= Flatline 1 line LED FGCA= Flatline 1 line clear LED LEDCAB = Clear lense with amber LED and bezel - LEDCR = Clear lense with red LED - LEDCRB = Clear lense with amber LED and bezel 7 FRONT GRILL
TRAIN HORN CAB & SLEEPER ACCESSORIES CAB & SLEEPER ACC. SLEEPER VENT & DOOR TRIM THORN-1 THORN-2 S7951002 S7951003 Fits all models THORN-1 3 Bells train horn (130 DB) Fits all models THORN-2 4 Bells train horn (145 DB) THORN-1 & 2 THORN-SV Solenoid S7951002 Sleeper vent trim S7951003 Sleeper vent trim (W/ FLAMES) FIRE WALL & MIRROR LIGHT BAR FOR 19 ½ 15 ½ 13 12 ½ 17 S7932006-LED Mirror lights bar ROUND LIGHTS (PR) S7932008-LED Mirror lights bar OVAL LIGHTS (PR) S7932010-LEDB Fire wall lights bar ROUND LIGHTS S7932016-LED Fire wall lights bar ROUND LIGHTS S7932023-LED Fire wall lights bar ROUND LIGHTS S7932027-LEDFA Fire wall lights bar OVAL FLATLINE AIR CLEANER BAR CAB PANEL S7522011 4900 - ALL YEARS S7522011 Air filter shrouds (PR) S7532001 4700 SB - 2012 & UP S7532001 Cab panel (BLANK) The following suffix represents the type of light that will be used on the product, price will vary accordingly: LED = LED no bezel - LEDB = LED with bezel - LEDCA = Clear lense with amber LED FGA=Flatline 4 lines led FGCA=Flatline 14 lines clear LED FGA= Flatline 1 line LED FGCA= Flatline 1 line clear LED LEDCAB = Clear lense with amber LED and bezel - LEDCR = Clear lense with red LED - LEDCRB = Clear lense with amber LED and bezel 8
CAB & SLEEPER ACCESSORIES INTERIOR CAB TRIM S7541001 S7541002 S7541003 S7541004 S7541005 S7541006 S7541007 S7542001 CONSTELLATION - 1998 & UP CONSTELLATION - 1998 & UP CONSTELLATION - 1998 & UP CONSTELLATION - 1998 & UP CONSTELLATION - 1998 & UP CONSTELLATION - 1996 & UP HERITAGE - 1988 & UP - 1998 & UP S7541001 S7541002 S7541003 S7541004 S7541005 S7542001 S7541006 S7541007 Glove box cover (UN) Lower glove box trim (UN) Ceiling light trim (UN) Upper dash trim (UN) Lower left dash trim (UN) Hood latch insert (PR) Park brake control valve trim (UN) Radio trim (UN) 9
WINDOW DEFLECTOR ONLY FOR WESTERN STAR TRUCKS CAB & SLEEPER ACCESSORIES WINDOWS DEFLECTOR S7531501 S7532002 S7532003 S7532005 S7532004 S7551002 S7551001 S7551001 S7551003 MODEL 4700-4800-4900 4900 STRATOSPHERE DAY CAB STRATOSPHERE S7533001 YEARS ALL YEARS ALL YEARS ALL YEARS ALL YEARS ALL YEARS ALL YEARS PART # S7532004 S7551002 S7551001 S7531501 S7532002 S7532003 S7532005 DESCRIPTION Lower door trim (PR) Baggage door handle trim Rear sleeper window deflector 2.5 Rear window deflector (UN) Side window deflector (MIRROR ON CAB) (PR) Side window deflector (MIRROR ON DOOR) (PR) KIT 4 PCS. ALL YEARS Window shade (MIRROR ON DOOR) (PR) ALL YEARS S7551003 Rear sleeper window deflector 3 ALL YEARS S7533001 Under window Trim (4 parts kit) 10
CAB & SLEEPER ACCESSORIES REVOLVING LIGHT BRACKET 05/2015-00 7 63 7 11.8 11 8 16 7 7 15.6 8.75 34 4.6 30 4.6 8.75 6.9 1.5 S7932011 S7932015 S7932017 S7932019 7 7 7 13 8 9 16 2.5 9.25 52 9 10.5 9 S7932020 S7932021 S7932022 S7932024 S7952004 S7952005 ALL EXTENDED DAY CAB OR SLEEPER S7932011 S7932015 S7932017 S7932019 S7932020 S7932021 S7932022 S7932024 S7952004 S7952005 Strobe light bracket (PR) Strobe light bracket (PR) Strobe light bracket (PR) Strobe light bracket (PR) Strobe light bracket (PR) Strobe light bracket (PR) Strobe light bracket (PR) Strobe light bracket (PR) Strobe light bracket (PR) Strobe light bracket (PR) 11 FRONT GRILL
FITS 33.625 FRAME AND FAIRING ACCESSORIES REAR LIGHTING ACCESSORIES LICENCE PLATE FRAME INCLUDED WHERE SHOWN FITS 33.625 01/2016-00 S7971008-LED S7971094-LEDB S7971004-LED 7971009-LED S7971005-LED S7971011-LED 7971016-LED S7971014-LED CENTER BACK PANEL COVER Recommended with the installation of rear center panel S7971006-LED S7971007-LED S7971010-LED 7971024-LED S7971001 S7971033-LED S7971031-LED S7971002 S7971036-LED 7971054-LED S7971032-LEDB S7971080-LED The following suffix represents the type of light that will be used on the product, price will vary accordingly: LED = LED no bezel - LEDB = LED with bezel - LEDCA = Clear lense with amber LED FGA=Flatline 4 lines led FGCA=Flatline 14 lines clear LED FGA= Flatline 1 line LED FGCA= Flatline 1 line clear LED LEDCAB = Clear lense with amber LED and bezel - LEDCR = Clear lense with red LED - LEDCRB = Clear lense with amber LED and bezel 12
FRAME AND FAIRING ACCESSORIES REAR LIGHTING ACCESSORIES SPRING LOADED MUD FLAP HANGER LIGHT BAR 3.75 3.75 3.75 7972010-SLEDB 7972012-SLED 7972011-SLEDB 3.75 Lorem ipsum C7972051-FOCR WIDE CENTER BACK PANEL WITH LIGHT - 45.625 - S7971057-LED S7971058-LED S7971101-LEDB Wide back panel & back cover included S7971059-LED S7971061-LEDB LICENCE PLATE FRAME WIDE CENTER BACK PANEL COVER Recommended with the installation of rear center panel TML-LLFRAME PLASTIC MET-LLFRAME METAL S7971003 CUSTOM LIGHT SETUP IS ALSO AVAILABLE REAR BACK FRAME COVER FOR VOCATIONAL TRUCKS S7971027-LED The following suffix represents the type of light that will be used on the product, price will vary accordingly: LED = LED no bezel - LEDB = LED with bezel - LEDCA = Clear lense with amber LED FGA=Flatline 4 lines led FGCA=Flatline 14 lines clear LED FGA= Flatline 1 line LED FGCA= Flatline 1 line clear LED LEDCAB = Clear lense with amber LED and bezel - LEDCR = Clear lense with red LED - LEDCRB = Clear lense with amber LED and bezel 13
FRAME AND FAIRING ACCESSORIES REAR ACCESSORIES MUD FLAP WEIGHT BOLTED 2 18 12 7972020-S 7972026-S 7972021-S WELDED STUDS 7972023-S 7972027-S 7972024-S 2 2 2 BOLTED 7972032-S 7972033-S 7972034-S WELDED STUDS 7972029-S 7972030-S 7972031-S 14
FRAME AND FAIRING ACCESSORIES REAR ACCESSORIES REAR FRAME COVER ANTI-SAIL FLAP PLATE BACKUP LIGHT SHIELD 7 3/8 S7571001 (7 3/8) S7972019 Anti-Sail Mud Flap Plate S7972028 AIR LINE BOX S7971035 FOR S7971090-LEDB ROUND LIGHTS FOR S7971086-LED OVAL LIGHTS FOR The following suffix represents the type of light that will be used on the product, price will vary accordingly: LED = LED no bezel - LEDB = LED with bezel - LEDCA = Clear lense with amber LED FGA=Flatline 4 lines led FGCA=Flatline 14 lines clear LED FGA= Flatline 1 line LED FGCA= Flatline 1 line clear LED LEDCAB = Clear lense with amber LED and bezel - LEDCR = Clear lense with red LED - LEDCRB = Clear lense with amber LED and bezel 15
FRAME AND FAIRING ACCESSORIES TANK SKIRT FAIRING 09-2016-01 Belt Bracket on Belt COME ONLY ONE SIDE SKIRT (UN) ALL YEAR S7571003 TANK SKIRT FAIRING (68 ) UN Belt Bracket on Frame COME WITH TWO SIDE SKIRTS (PR) ALL YEAR S7571002 TANK SKIRT FAIRING (68 ) PR 16
FRAME AND FAIRING ACCESSORIES HARNESS AVAILABLE FOR EACH MODEL OF PANEL - 5 YEARS WARRANTY 79720101112-FIL LIGHT BAR HARNESS 7971000-FIL PRINCIPAL TRUCK HARNESS INSTRUCTIONS INCLUDED 79720101112-FIL LIGHT BAR HARNESS 7971004 TO 11-FIL CENTRAL BACK PANEL HARNESS MODEL PART # 7971000-FIL 7971004-5-FIL 7971006-FIL 7971007-FIL 7971008-FIL 7971009-FIL 7971010-FIL 7971011-FIL 79720101112-FIL DESCRIPTION Principal truck harness Center back panel harness (7971004 & 7971005) Center back panel harness (7971006) Center back panel harness (7971007) Center back panel harness (7971008) Center back panel harness (7971009) Center back panel harness (7971010) Center back panel harness (7971011) Mud flap hanger harness 6 contacts (7971010-7972011 - 7972012) CUSTOM HARNESS AVAILABLE ON REQUEST 17
FRAME AND FAIRING ACCESSORIES 5TH WHEEL RAMP 80328-AL 80328-AR 3 2 28 80455-AL 36 80455-AR 55 80337-AL 80337-AR 3 18 37 80539-AL 5 18 80539-AR 39 80343-AL 80343-AR 3 2 43 81242-AL 81242-AR 2 19 42 80355-AL 80355-AR 3 36 55 81344-AL 81344-AR 3 26 4 80412-AL 80412-AR 12 22 80329-AL 80329-AR 3 2 29 80437-AL 80437-AR 18 37 80512-AL 80512-AR 5 12 12 80443-AL 80443-AR 2 43 80715-AL 7 80715-AR 15 80435-AL 80435-AR 23 35 80324-AL 80324-AR 3 23 2 80524-AL 80524-AR 5 23 5/8 84343-AL 3 WIDE 84343-AR 3 WIDE 3 2 43 REINFORCED RAMPS IMPROVE THE SAFETY OF HOOKING UP TRAILERS, HELP PREVENT DAMAGE TO FENDERS AND OTHER REAR ACCESSORIES MODIFICATION COULD BE REQUIRED FOR INSTALLATION CUSTOM ON REQUEST 84443-AL 3 WIDE 84443-AR 3 WIDE FRONT GRILL 2 43 18
CUSTOM TRUCK ACCESSORIES 6755 Choquette avenue, local #1 St-Hyacinthe, QC, Canada J2S 8L2 TEL : FAX : TOLL FREE : 450 223-1753 450 223-1300 1 877 223-1753 WWW.METCHRO.COM INFO@METCHRO.COM