KAVITSU Excellence in Gear Technology The compact And Efficient
OUR RANGE OF PRODUCT PLANETARY SPEED REDUCER TORQUE :- 0 Nm TO 50 00 000 Nm :- : TO 00000 : POWER :- 0.8 KW TO 000 KW MOUNTING :- FOOT, FLANGE, AGITATOR WITH FREE, PLANETARY GEARED MOTOR TORQUE :- 0 Nm TO 50 00 000 Nm SPEED :- 500 RPM TO 0.0 RPM POWER :- 0.8 KW TO 0 KW MOUNTING :- FOOT, FLANGE, AGITATOR. PLANETARY CREEP DRIVE TORQUE :- 00 Nm TO 500 Nm :- : TO 5: POWER :- 0.8 KW TO 5 KW SUITABLE FOR THRUSTOR BRAKE DRUM DIAMETER 00mm to 500mm PLANETARY SPRCKET DRIVE SPECIALLY DESIGNED FOR CHAIN CONVEYORS TORQUE :- 0 Nm TO 0000 Nm SPEED :- 0.5 MPN TO 00 MPM POWER :- 0.75 KW TO 7.5 KW :- FREE OR SHAFT MOUNTED SPEED REDUCER TORQUE :- 00 Nm TO 0000 Nm :- 5. TO 0. POWER :- 0.8 KW TO 0 KW AVAILABLE WITH SQURE SHAPE AS WELL AS ROUND SHAPES ALSO BEVEL PLANETARY SPEED REDUCER [ COMBINATION THAT GIVES COMPACTNESS & RIGIDITY IN RIGHT ANGLE DRIVE] TORQUE :- 0 Nm TO 5000000 Nm :- : TO 5,000 : POWER :- FRACTIONAL HP TO 500 HP MOUNTING :- FOOT, FLANGEAGITATOR WITH FREE, SPECIAL MULTI SPEED GEAR BOX WITH SHIFTER MECHANISM NO. OF SPEEDS :- MAX TORQUE :- UP TO 5000 Nm POWER :- 0.8 KW TO 00 KW MOUNTINGS :- FOOT/FLANGE WITH FREE/
KAVITSU specializes in the Production of Planetary Gearboxes. In its 6 years history it has been attained a position as a market leader in power transmission products. Boosting a wide range in different sizes & types, the Company offers the best technical solutions for numerous applications. This, in addition to their excellent performance to price ratio, makes KAVITSU planetary gearboxes extremely attractive alternatives in the sector of power transmission. All this is made possible by a company characterized by: a) Product development is assured by highly professional & competent personnel using state-of-the art design systems. b) The use of sophisticated machinery noted for its significant production flexibility guarantees a rapid flow of components & top level quality. c) All parts are Scrupulously checked on sophisticated equipment as part of the in-house Quality Control Department. DESCRIPTION Introduction Specifications Versions Output torque Power Thermal power Efficiency Reduction ratio Angular speed Service factor Life factor Selection Installation Maintenance Storage Condition of supply Lubrication Gear box selection charts & dimensions SYMBOL OF UNIT OF MEASURE Fh Fh Fh LIFETIME FACTOR FOR BEARING SHAFT CALCULATION LIFETIME FACTOR FOR GEARBOX CALCULATION fs SERVICE FACTOR ft FACTOR ftp TEMPERATURE FACTOR fv SPEED FACTOR h LIFETIME IN HOURS i REDUCTION Kr RADIAL FACTOR M REFERENCE TORQUE (Nm) Mn M max NOMINAL TORQUE (Nm) GEARBOX MAX. OUTPUT TORQUE (Nm) Mb RATED BRAKE TORQUE (Nm) mr REQUIRED TORQUE AT GEARBOX OUTPUT mc CALCULATED TORQUE AT GEARBOX OUTPUT n ANGULAR SPEED OF GEARBOX (min- ) n ANGULAR SPEED OF GEARBOX OUTPUT (min- ) P MAXIMUM TRANSMITTED POWER AT GEARBOX Tf = OPRATING TIME UNDER Tr = REST TIME WHICH IS CORRECT P MAXIMUM TRANSMITTED POWER AT GEARBOX OUTPUT Pt POWER (KW) nd DYNAMIC EFFICIENCY (%) tf = Operating time under load tr = Rest time..0 INTRODUCTION This catalogue presents KAVISTU's range of PLANETARY GEARBOXES. The range has been expanded & integrated with new sizes, technical improvements & enhanced modularity right through to the larger sizes. This feature signifies greater flexibility in internal production to ensure quick availability of products in the sizes & types requested either directly from the Company or from the many affiliates belonging to the KAVITSU sales network around the world.the gearboxes are tested in conformity with the ISO standards..0 SPECIFICATIONS The series consist of a range of multi-purpose Planetary Gearboxes that can be operated by either hydraulic or electric motors. Basic features are: 0 different models Output torque up to 50 00 000 Nm Transmissible power up to 000 KW Ratio from : to 5000: or more also possible Modular design.0 VERSIONS : In line Right Angle (with bevel gear pair) Reduction stages ranging from to or more also possible With flange-mounted, foot-mounted & shaft mounted Output shaft with keyway, splined, splined hollow shaft, hollow shaft-mounting with shrink disc. Input adaptors for: Electric motors to IEC standards design B5 Hydraulic motors from major manufacturers according to customer requirements.. High speed shaft Geared motors with KIVI make electric motors Hydraulic motors Negative hydraulic parking brakes for operations by hydraulic motors. Output shaft accessories : Flange Pinion Splined bar Shrink disc. More design features High ratio of transmissible torque to overall dimensions High radial & axial load capacity of output shaft. Taper roller bearings fitted on request. High efficiency Inner parts are connected using grooved sections instead of tabs, planetary gears of reduction stages mounted to floating holders to ensure maximum load distribution among Planetary Gears. Housing made of spheroidal cast iron or cast steel.0 OUTPUT TORQUE. Reference torque M [ Nm ] Indicative output torque to easily establish the performance class of each gearbox on basic size.. Nominal torque Mn [Nm ]
Torque transmitted at the output at uniform continuous load, Service factor fs = for different fixed values of the life factor (n.h). 5.0 POWER 5. Input rated power P [KW] Power P indicated in the specification table for each gearbox size is either the intermitted or continuous power which can be transmitted at the gear box input under the following conditions: Input speed- n theoretical duration 000h services factor fs= Check that the formula here below is always satisfied 5. Output power P [KW] This value is power transmitted at the gear box output. It can be calculated with the following formula : P= P* n =? d 6.0 POWER PT [ KW ] This value indicats the thermal capacity of gearbox's ( refer to the technical data concerning the gearboxes under consideration ) & is the power that can be transmitted under continuous duty at an 0 input speed n of min- at an ambient temperature of 0 C without using a supplementary cooling devices. For a duty cycle with short operating periods and sufficiently long pauses to allow the unit to cool, thermal power is not particularly important and therefore it does not need to be taken into consideration. 0 At an ambient temperature other than 0 C under intermitten t duty conditions and with an input speed n other than min - it is possible to calculate the Pt value according to the thermal factor ft, shown in table. Make sure that the following condition is always satisfied. The intermittence factor (I)% is obtained from the ratio between operating time under load tf= and total (tf +tr), where rest time tr, expressed as a percentage. i = tf/tf+tr*00% NOTE : The thermal power values indicated in the selection charts for each size apply to the versions without negative multidisc brake. 7.0 EFFICIENCY 7. Dynamic effiency d Obtained from the ratio of output power P to input power P according to the following equation: n d = P/P*00% n 8.0 REDUCTION i This is the ratio of gearbox input speed to gearbox output speed. i= n/n 9.0 ANGULAR SPEED 9. Input speed n [min -] Refer to the speed of motor if motor is directly connected to gearbox. In the case of an indirect drive, this value is the speed of the motor divided by the transmission ratio of the indirect drive accessories (belt, chain, etc.) Input speed should not exceed the value indicated in the table on gearbox technical features. As per continuous operation in industrial applications, we recommend that speed of min- be never exceeded. 9. Output speed n [min-] Calculated from input speed n and transmission ratio i according to the following equation. n = n/i 0.0 SERVICE FACTOR fs Service Factor depends upon the type of application. This factor takes into consideration ( with sufficient approximation ) load variations which the gearbox may undergo for a specific type of duty. It also takes into consideration the selected type of the drive unit. Table gives indications for the service factor to be selected according to the applications & unit operation type..0. LIFE FACTOR ( Fh, Fh) Factor resulting by multiplying angular speed at input (n) or output (n ) by actual operating working hours h, break times excluded. Fh = ( n * h ) Fh = ( n * h ) Life factor is directly proportional to gearbox rpm during the whole duty time..0 Gearbox selection a) Determine the following according to the required application. Service factor fs Required gearbox working life h required drive unit ( hydraulic, electric or others ) b) Define the calculated torque with the required output torque mr *mc *=mr * fs c) Calculate the life factor Which is required for working life h & output speed ( n:) Fh = ( n * h ) d) Calculate the required reduction ratio: i= n/n e) Select gearbox size which is having a reduction ratio close to the calculated valve, and satisfies the following : mc _ Mn con, with mit,avec Fh _ ( n * h ) where Mn & Fh are indicated in the tables on technical features for each gearbox size..0 INSTALLATION Observing the few rules or correct installation is essential to the reliable & proper operation of the gearbox or geared motor. The rules set out here are intended as a preliminary guide to select gearbox or geared motor. For effective & proper installation, follow the instructions given in the Installation & maintenance Manual of the gearboxes. Following is a brief outline of installation rules : a) Fastening Place gearbox on a surface providing adequate rigidity. Mating surface should be machined & flat. Mating surface must be within definite geometric tolerance. This is especially true for flange - mounted gearboxes with splined hollow shafts. In applications that involve high radial load at the output end, flange mounting is recommended for some gearbox sizes as this mounting makes use of the double pilot diameters provided on these gearboxes. See section "Loads on shafts" for the different gearbox sizes. Make sure the gearbox is suitable for the required mounting position.use screw of resistance class 8.8 to over secure the gearbox, torque up screws to the figures indicated in the relevant tables. With transmitted output torque greater than or equal to 70% of the indicated Mmax torque, & with frequent movement reversals,
use screw with minimum resistance Class 0.9 Some gearbox sizes can be fastened using either screws or pins. If a pin is used, the length of pin seated in the frame the gearbox being in stalled should be at least.5 times pin diameter. b) Connections : Secure the connection parts e.g couplings, pulleys etc. input & output. Do not tap them with hammers or similar tools. To insert these parts, use the service screws & threaded holes provided on the shafts. Be sure to clean off any grease or protectants from the shafts before fitting any connection parts. Fitting hydraulic motors : Be careful of the O ring between motor flange & gearbox input flange while assembling. Install the hydraulic motor before filling lubricant oil into the gearbox. Connecting the hydraulic brakes : The hydraulic circuit should be such to ensure that brake is released instants before gearbox starts & applied after gearbox has stopped. Check that pressure in the hydraulic line for brake release is at zero whenever gearbox is stopped. c) Direction of rotation : Motors are connected to the suitable electric or hydraulic circuit according to their direction of rotations. When performing these connections, bear in mind that all gearboxes, whether in the in -line or right angle design, have the same direction of rotation both at input & output. d) Lubrication Before start up fill the gearbox with the recommended lubricant oil up to correct level. Level is checked through the suitable plug or sight glass provided on each gearbox depending on designated mounting position..0 MAINTENANCE Check the tightness of mounting bolts, after the initial 50 hours of operation. Change the oil first after 00-50 hours operation. Subsequently, change the oil every 000-000 hours operation depending on application. Alternatively change oil once in a year. Check the oil level in the gearbox every month and top up as necessary. Have a general checkup every day Gearboxes are supplied as follows: a) Ready for installation in the mounting position as specified purchase order. b) Dry inner parts are protected by the oil used for final testing. (without oil filled) C) Painted with colors. Mating surface are not painted d) Tested to in - house specifications e) Suitably packed f) Supplied with mounting nuts & bolts for IEC electric motors or hydraulic motors 7.0 LUBRICATION ( Prior to start - up ) All gearboxes are oil-bath lubricated. For applications calling for gearboxes with vertically positioned axis, in which oil coverage during operation would not be sufficient to ensure correct lubrication of upper bearings, suitable life lubrication syste Before start-up fill the gearbox with the correct quantity of oi selecting the viscosity level as per table. These gearboxes are provided with oil filling, level & drain plugs. For a proper plug positioning for adequate lubrication, please always specify the required mounting position. The table list most common brands of lubricant & the types recommended for normal applications. Note : For applications with special operating conditions, consult the factory for complete information. 0 Oil temperature must not exceed 95 C. Units are delivered without oil but with filling, drain & oil level plugs correctly positioned. The oil capacities indicated on gearbox for the various types of unit are indicative only. Check the oil level plug to ensure the correct amount of oil. Should transmitted power exceed the thermal capacity of the unit forced lubrication must be provided. 5.0 STORAGE Observe the following instructions to ensure correct storage of delivered products. a) Do not store outdoors, in areas exposed to weather or with excessive humidity. b) Always place boards in wood or other material between floor and products to avoid direct contact with the floor. c) For storage periods of over 60 days all machined surfaces such as flanges, shafts and couplings must be protected with a suitable anti-oxidation product (Mobilarma 8 or equivalent product). d) The following measures must be taken in receipt of products for which the expected storage period exceeds 6 months. d) Cover outer machined parts and mating parts with grease to avoid oxidation. ) Position the gearbox with the breather plug up and fill them with oil. Before use the gearbox should be filled with the proper amount of lubricant of the recommended type. 6.0 SUPPLY CONDITIONS
AMBIENT TEMP CONTINUOUS POWER FACTOR INTERMEDIATE DUTY CYCLE (CYCLIC DUN FACTOR%) SPEED FACTOR 80% 60% 0% 0% SPEED SPEED FACTOR 0...6.8 750.5 0.0...5.7 000. 0 0.9...5 0 0.7 0.8 0.9. 000 0.7 50 0.5 0.6 0.7 0.8 0.9 TYPE OF UNIFORM MODERATE HEAVY SHOCK POWER SOURCE Electric Motor, Steam Turbine or Hydraulic Motor Multi-cylinder internal combustio n engine Single cylinder interna l combustio n engine Ambient Temperature AGIP ARAL BP - MACH CASTRO L CHEVRON ELF ESSO FINA I.P. KLUBER MOBIL SHELL SERVICE FACTOR RELATED TO NO STARTS / HOUR TYPE OF DRIVE UNIT ELECTRIC MOTOR HYDRAULIC MOTOR ENDOTHERMIC ENGINE ELECTRIC MOTOR HYDRAULIC MOTOR ENDOTHERMIC ENGINE ELECTRIC MOTOR HYDRAULIC MOTOR ENDOTHERMIC ENGINE DUN O F WORKING IN HR S./DAY Under - to 0 Over 0 Under - to 0 Over 0 Under - to0 Over 0 0.80. 0 0.5.00.5.50.5.50.75.5..5.. RECOMMENDED OIL BRANDS ISO Standard EP grade oils -0º C To + 0º C ISO VG 50 BLASIA 50 BLASIA S50 DEGOL BG 50 ENERGOL GR XP 50 ALPHA SP 50 EDWN. GEAR COMPOUND 50 REDUCTELF SP 50 SPARTAN EP 50 GLYCOLUBE 50 GIRAN 50 MELLANA 50 PONTAX HDS LAMORA 50 SYNTHESO D 50 EP MOBILGEAR 69 SHC 69 OMELA EP 50 TIVELA OIL WA SA CARTER EP 50 NO OF START/HOUR 6 6 5 50..5.5.75...5.5..75....5.5.00.5.50.5.50 75. 50..75. 00.5.5...5.6.5.5 CLASSIFICATION...5 No te - The starting torque should not ex ceed. 0 time the norma l torq ue. UNIFO RM SHOCK MODERATE SHOCK HEAV Y SHOCK.6..5.8.5.50.75.00 75. 00..5. 00. 5.50 +0º C To + 65º C ISO VG 0 BLASIA 0 BLASIA S0 DEGOL BG 0 ENERGOL GR XP 0 ALPHA SP 0 N.L. GEAR COMPOUND 0 REDUCTELF SP 0 SPARTAN EP 0 GLYCOLUBE 0 GIRAN 0 MELLANA 0 PONTAX HDS LAMORA 0 SYNTHESO D 0 EP MOBILGEAR 60 SHC 60 OMELA EP 0 TIVELA OIL WB CARTER EP 0
I STAGE II STAGE III STAGE IV STAGE I STAGE II STAGE III STAGE IV STAGE KA-0 80 80 80 80 KT- 000 000 500 500 MECHANICAL OUTPUT RATINGS Nm KA-0 0 0 0 0 KT- 0000 8000 8000 8000 KA-0 50 50 50 50 KT- 0000 50000 50000 50000 KA-0 700 950 950 950 KT- 0000 08000 08000 08000 KA-05 950 550 550 550 KT-5 65000 98000 98000 98000 KT-06 600 000 500 500 KT-6 0 50000 75000 50000 KT-07 500 500 5000 5000 KT-7 00000 50000 500000 500000 KT-08 000 6000 7500 7500 KT-8 50000 600000 000000 0000 FOR TORQUE RATING ABOVE 5000000 Nm, PLEASE CONTACT FACTORY. KT-09 5000 0000 000 000 KT-9 000 000000 500000 500000 KT-0 8000 0 0000 0000 KT-0 000000 800000 5000000 5000000 NOTE- ALL ABOVE MENTIONED TORQUE RATINGS ARE MAXIMUM, PLEASE REFER SELECTION CHART FOR ACTUAL MAXIMUM TORQUE AS PER. IDENTIFICATION OR ORDERING CODE NO KT 09 F 7. SM H080 W H ORIENTATION H= HORIZONTAL H= AZIMUTH H= VERTICAL FOOT RIGHT SIDE H= VERTICAL FOOT LEFT SIDE V= VERTICAL DOWNWARD V= VERTICAL UPWARD V= INCLINE SHAFT DOWNWARD V= INCLINE SHAFT UPWARD TYPE I= INLINE B= RIGHT ANGLE BEVEL W= RIGHT ANGLE WORM P= PARRALEL & TYPE H 000= FRAME e.g. H-80, H-00(For hollow input) M 000= MOTOR e.g. KW, 75 KW (For geared motor) F= FREE SOLID SHAFT N= NON STANDARD SHAFT HYD = HYDRAULIC MOTOR CM= CYLINDRICAL MALE CF= CYLINDRICAL FEMALE SM= SPLINE MALE SF= SPLINE FEMALE SD= SHRINK DISC REDUCTION AS PER SELECTION TABLE MOUNTING F= FOOT L= FLANGE A= AGITATOR S= SHAFT N= NON STD TYPE KA= MINI RANGE KT= MEDIUM & HEAVY NO OF = SINGLE = DOUBLE = TRIPLE = QUADRUPLE Mounting configuration, Output or Input shaft, input versions required other than catalogue please contact our design deparment 5
KA-0 KA-0 KA-0 SPEED 0 000 KA- 0 SELECTION TABLE 5 000 00 000 Mn (Nm) 000 000.9 80 6 58 5 50 8..69 80 6 58 5 50 8 0.96 0. 7 FS 00.50 80 6 58 5 50 8 0.79 0. 80 6 58 5 50 8 0.60 800.8 80 6 58 5 50 8 0.5 900.6 80 6 58 5 50 8 0.5 0. 7 FS 000. 80 6 58 5 50 8 0. 6.6 80 6 58 5 50 8 0.7 0. 80 6 58 5 50 8 0.0 0 000 000 MAX 7.5 80 6 58 5 50 8 0..5 80 6 58 5 50 8 0.7 5.8 80 6 58 5 50 8 0.6 50. 80 6 58 5 50 8 0. 0. 7 FS 6. 80 6 58 5 50 8 0.9 7.7 80 6 58 5 50 8 0.6 9. 80 6 58 5 50 8 0. 00 KA-0 0.5 80 6 58 5 50 8 0. 9.8 80 6 58 5 50 8 0.0 8.6 80 6 58 5 50 8 0.09 00 60. 80 6 58 5 50 8 0.08 85. 80 6 58 5 50 8 0.07 95.5 80 6 58 5 50 8 0.06 0. 7 FS 6. 80 6 58 5 50 8 0.05 8. 80 6 58 5 50 8 0.05 75.7 80 6 58 5 50 8 0.05 90.7 80 6 58 5 50 8 0.0 6. 80 6 58 5 50 8 0.0 0.0 80 6 58 5 50 8 0.0 KA-0 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KA-0. 0 0 9 87 7 67 60 57.89 50.6 0 0 9 87 7 67 60 57.7. 0 0 9 87 7 67 60 57.50 0.75 80 FS.9 0 0 9 87 7 67 60 57.8 6.0 0 0 9 87 7 67 60 57.0 00 KA-0 0.7 0 0 9 87 7 67 60 57.00.9 0 0 9 87 7 67 60 57 0.90 850. 0 0 9 87 7 67 60 57 0.90 000 5.0 0 0 9 87 7 67 60 57 0.90 7.0 0 0 9 87 7 67 60 57 0.90 0.75 80 FS 0.0 0 0 9 87 7 67 60 57 0.90.8 0 0 9 87 7 67 60 57 0.89.8 0 0 9 87 7 67 60 57 0.78 9. 0 0 9 87 7 67 60 57 0.67 6.0 0 0 9 87 7 67 60 57 0.5 KA-0 8.8 0 0 9 87 7 67 60 57 0.5. 0 0 9 87 7 67 60 57 0.7 9.0 0 0 9 87 7 67 60 57 0. 6.7 0 0 9 87 7 67 60 57 0. 70. 0 0 9 87 7 67 60 57 0.0 0.75 80 FS 00 79. 0 0 9 87 7 67 60 57 0.6 89.8 0 0 9 87 7 67 60 57 0. 0.0 0 0 9 87 7 67 60 57 0.0. 0 0 9 87 7 67 60 57 0.8 0.0 0 0 9 87 7 67 60 57 0.7. 0 0 9 87 7 67 60 57 0.5 8.5 0 0 9 87 7 67 60 57 0. 7.6 0 0 9 87 7 67 60 57 0. 6
KA-0 SELECTION TABLE KA-0 0.7 0 0 9 87 7 67 60 57 0..9 0 0 9 87 7 67 60 57 0.0 5.5 0 0 9 87 7 67 60 57 0.09 79. 0 0 9 87 7 67 60 57 0.08 0.0 0 0 9 87 7 67 60 57 0.07 0. 0 0 9 87 7 67 60 57 0.06 70.6 0 0 9 87 7 67 60 57 0.06 99.8 0 0 9 87 7 67 60 57 0.05 6.5 0 0 9 87 7 67 60 57 0.05 0.75 80 FS 00 9.6 0 0 9 87 7 67 60 57 0.0 55. 0 0 9 87 7 67 60 57 0.0 6.8 0 0 9 87 7 67 60 57 0.0 6.8 0 0 9 87 7 67 60 57 0.0 706. 0 0 9 87 7 67 60 57 0.0 70. 0 0 9 87 7 67 60 57 0.0 78. 0 0 9 87 7 67 60 57 0.0 86.8 0 0 9 87 7 67 60 57 0.0 89.0 0 0 9 87 7 67 60 57 0.0 07.6 0 0 9 87 7 67 60 57 0.0 96.0 0 0 9 87 7 67 60 57 0.0 KA-0 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KA-0.8 50 60 5 00 79 5 9 85 5.89. 00 FS 000.8 50 60 5 00 79 5 9 85 5.. 50 60 5 00 79 5 9 85.8 5. 50 60 5 00 79 5 9 85.66 7.0 50 60 5 00 79 5 9 85.76 00 KA-0. 50 60 5 00 79 5 9 85.0.5 50 60 5 00 79 5 9 85.7 750.9 50 60 5 00 79 5 9 85.6 000 5.8 50 60 5 00 79 5 9 85.7 6. 50 60 5 00 79 5 9 85.7 8.5 50 60 5 00 79 5 9 85.7 0.75 80 FS.5 50 60 5 00 79 5 9 85.7 6. 50 60 5 00 79 5 9 85.7 9.7 50 60 5 00 79 5 9 85.0.6 50 60 5 00 79 5 9 85.9. 50 60 5 00 79 5 9 85. KA-0 5.6 50 60 5 00 79 5 9 85.0 50. 50 60 5 00 79 5 9 85.00 59.9 50 60 5 00 79 5 9 85.00 70. 50 60 5 00 79 5 9 85 0.95 78. 50 60 5 00 79 5 9 85 0.85 88.8 50 60 5 00 79 5 9 85 0.75 0.75 80 FS 0. 50 60 5 00 79 5 9 85 0.6. 50 60 5 00 79 5 9 85 0.60 7.7 50 60 5 00 79 5 9 85 0.5 7.5 50 60 5 00 79 5 9 85 0.8 59.8 50 60 5 00 79 5 9 85 0. 78. 50 60 5 00 79 5 9 85 0.7 95.5 50 60 5 00 79 5 9 85 0. 00 KA-0 0. 50 60 5 00 79 5 9 85 0.0 9.9 50 60 5 00 79 5 9 85 0.8 8.8 50 60 5 00 79 5 9 85 0.5.6 50 60 5 00 79 5 9 85 0..5 50 60 5 00 79 5 9 85 0.0 70.7 50 60 5 00 79 5 9 85 0.9 98.9 50 60 5 00 79 5 9 85 0.8 5. 50 60 5 00 79 5 9 85 0.5 506.5 50 60 5 00 79 5 9 85 0. 55. 50 60 5 00 79 5 9 85 0. 0.75 80 FS 00 69.5 50 60 5 00 79 5 9 85 0. 65.8 50 60 5 00 79 5 9 85 0. 709.6 50 60 5 00 79 5 9 85 0.0 766. 50 60 5 00 79 5 9 85 0.09 806. 50 60 5 00 79 5 9 85 0.09 85. 50 60 5 00 79 5 9 85 0.08 98. 50 60 5 00 79 5 9 85 0.07 959.0 50 60 5 00 79 5 9 85 0.07 7.9 50 60 5 00 79 5 9 85 0.06 555. 50 60 5 00 79 5 9 85 0.0 7
KA- 0 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KA-0 KA-0.8 70 59 5 9 58 8 5 5 0 9.68.7 FS 6900.8 70 568 5 7 0 66 0 0 9 8.. 80 68 585 50 50 8 88 5 8.07 5. 770 66 556 5 77 97 68 8 6 6.7 7.0 60 88 07 78 5 9 60 50 6.0 700. 950 760 686 6 588 90 55 0 90 6. 0.75 80 FS 8700.9 950 760 686 6 588 90 55 0 90 5.60 900.59 950 760 686 6 588 90 55 0 90 5.00 5.0 950 760 686 6 588 90 55 0 90 5.00 6.96 950 760 686 6 588 90 55 0 90 5.00 9.7 950 760 686 6 588 90 55 0 90 5.00 0.7 950 760 686 6 588 90 55 0 90 5.00. 950 760 686 6 588 90 55 0 90 5.00 9.8 950 760 686 6 588 90 55 0 90.6.97 950 760 686 6 588 90 55 0 90. 9.0 950 760 686 6 588 90 55 0 90.6 KA-0 5.59 950 760 686 6 588 90 55 0 90.6 50. 950 760 686 6 588 90 55 0 90.00 59.89 950 760 686 6 588 90 55 0 90.00 70. 950 760 686 6 588 90 55 0 90.00 78.7 950 760 686 6 588 90 55 0 90.80 88.8 950 760 686 6 588 90 55 0 90.58 0.75 80 FS 9800 0. 950 760 686 6 588 90 55 0 90.5.6 950 760 686 6 588 90 55 0 90.6 7.7 950 760 686 6 588 90 55 0 90.0 7.5 950 760 686 6 588 90 55 0 90.0 59.8 950 760 686 6 588 90 55 0 90 0.88 78.0 780 6 56 50 8 0 7 0 0.65 95.8 950 760 686 6 588 90 55 0 90 0.7 KA-0 0.6 950 760 686 6 588 90 55 0 90 0.6 9.9 950 760 686 6 588 90 55 0 90 0.59 8.75 950 760 686 6 588 90 55 0 90 0.5.6 950 760 686 6 588 90 55 0 90 0.7.5 950 760 686 6 588 90 55 0 90 0. 70.66 950 760 686 6 588 90 55 0 90 0.0 98.90 950 760 686 6 588 90 55 0 90 0.7 5.0 950 760 686 6 588 90 55 0 90 0. 506.5 950 760 686 6 588 90 55 0 90 0.9 0.75 80 FS 9800 55.7 950 760 686 6 588 90 55 0 90 0.7 69.8 950 760 686 6 588 90 55 0 90 0. 65.80 950 760 686 6 588 90 55 0 90 0. 709.59 950 760 686 6 588 90 55 0 90 0. 766.6 950 760 686 6 588 90 55 0 90 0.9 806.6 950 760 686 6 588 90 55 0 90 0.8 85. 950 760 686 6 588 90 55 0 90 0.8 98.08 950 760 686 6 588 90 55 0 90 0.6 959.0 950 760 686 6 588 90 55 0 90 0.5 7.88 950 760 686 6 588 90 55 0 90 0. 866. 780 6 56 50 8 0 7 0 0.06 9.9 780 6 56 50 8 0 7 0 0.05 KA-05 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KA-05.7 850 680 6 567 56 9 07 6 9.85 5.5 FS.6 80 656 59 57 508 9 9 6 0.8.8 980 78 708 65 607 506 69 7 0.8 00.6 950 760 686 6 588 90 55 0 90 9.6 5. 090 87 787 77 675 56 5 6 7 9. 6.69 860 688 6 57 5 66 5 9.0 700 8.0 80 66 599 55 5 8 97 5 9.0 500 8
KA-05 SELECTION TABLE KT-05 0.7 0 6 06 97 879 7 679 60 58 0.08. 00 FS 5600.69 550 0 0 0 960 800 7 660 66 0.08. 550 0 0 0 960 800 7 660 66 9.7 5900.98 80 8 069 987 96 76 708 60 607 8.68.7 0 6 06 97 879 7 679 60 58 8.50 600 7.0 80 z8 069 987 96 76 708 60 607 8.50 9.6 550 0 0 0 960 800 7 660 66 8.50 0.85 550 0 0 0 960 800 7 660 66 8.50 6900.67 550 0 0 0 960 800 7 660 66 8.50 7.75 550 0 0 0 960 800 7 660 66 7.7 7600 6.79 550 0 0 0 960 800 7 660 66 5.8 8.7 00 880 795 7 68 568 56 68 5.6 KT-05 60.6 550 0 0 0 960 800 7 660 66.0 0.75 80 FS 70.7 550 0 0 0 960 800 7 660 66.6 79.85 550 0 0 0 960 800 7 660 66.0 8000 90.7 550 0 0 0 960 800 7 660 66.0 00.7 550 0 0 0 960 800 7 660 66.00.6 550 0 0 0 960 800 7 660 66.00 5. 550 0 0 0 960 800 7 660 66.8.0 550 0 0 0 960 800 7 660 66.6 KA-0 SELECTION TABLE 66.8 550 0 0 0 960 800 7 660 66.8 78. 550 0 0 0 960 800 7 660 66.9 98.69 70 76 06 980 90 759 70 66 60.09 0.75 550 0 0 0 960 800 7 660 66.0.6 70 76 06 980 90 759 70 66 60 0.9 89.0 70 76 06 980 90 759 70 66 60 0.75 KT-05.96 550 0 0 0 960 800 7 660 66 0.77 0.75 80 FS 8000 0.8 550 0 0 0 960 800 7 660 66 0.7 7. 550 0 0 0 960 800 7 660 66 0.65 0.8 550 0 0 0 960 800 7 660 66 0.60 55.6 550 0 0 0 960 800 7 660 66 0.5 50.6 550 0 0 0 960 800 7 660 66 0.8 555. 550 0 0 0 960 800 7 660 66 0. 60. 550 0 0 0 960 800 7 660 66 0.0 65.69 550 0 0 0 960 800 7 660 66 0.7 696.90 550 0 0 0 960 800 7 660 66 0.5 750.6 550 0 0 0 960 800 7 660 66 0. 807.5 550 0 0 0 960 800 7 660 66 0.0 896.8 550 0 0 0 960 800 7 660 66 0.7 998.90 550 0 0 0 960 800 7 660 66 0. 0. 550 0 0 0 960 800 7 660 66 0. 07.76 00 880 795 7 68 568 56 68 5 0. 0.69 00 880 795 7 68 568 56 68 5 0. 6.0 070 856 77 7 66 55 5 55 9 0.0 7.05 070 856 77 7 66 55 5 55 9 0.0 77.8 070 856 77 7 66 55 5 55 9 0.08 KT- 06 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KT-06.7 5 0 09 950 88 75 68 606 585 9.87.6 66 0 09 00 859 796 708 68.6 700.8 600 80 56 067 99 86 766 68 657 8..6 50 07 95 795 77 655 6 5.6 7.5 FS 5. 80 7 9 7 9 950 880 78 755 5.9 7500 6.69 560 8 7 00 966 805 76 66 60 0. 8.0 690 5 7 06 87 809 79 69 0.00 KT-06 0.7 890 087 97 789 9 8 0 86 0.5 800.69 790 05 860 78 0 5 87 5 8.5 9000. 890 087 97 789 9 8 0 86 8.6 9500.98 680 96 787 659 8 8 0 00 5.7.7 880 0 080 90 78 86 78 6 8.87 000 7.0 000 00 67 000 858 58 5 77.5.7 FS 9.6 880 0 080 90 78 86 78 6 8. 0.85 000 00 67 000 858 58 5 77 0.95 000.67 880 0 080 90 78 86 78 6 8 9.6 7.75 60 58 8 07 957 6 5 5 97 8.67 00 6.79 60 58 8 07 957 6 5 5 97 6.5 850 8.7 0 79 68 9 87 56 07 95 99 6. 500 9
KT- 06 SELECTION TABLE KT-06 60.6 90 6 76 9 07 698 57 00 50 5.6 650 70.7 90 6 76 9 07 698 57 00 50.85 79.85 90 6 76 9 07 698 57 00 50.7 90.7 60 58 8 07 957 6 5 5 97.6 00.7 60 58 8 07 957 6 5 5 97.5.6 60 58 8 07 957 6 5 5 97.86 5. 0 7 77 87 770 6 60 07.8 0.75 80 FS.05 90 6 76 9 07 698 57 00 50.0 66.8 60 58 8 07 957 6 5 5 97.00 78. 60 58 8 07 957 6 5 5 97.00 98.69 990 9 60 99 85 5 7 7.00 0.75 60 58 8 07 957 6 5 5 97.00.6 0 79 68 9 87 56 07 95 99. 89.0 0 79 68 9 87 56 07 95 99.5 KT-06.96 90 6 76 9 07 698 57 00 50. 0.75 80 FS 0.8 90 6 76 9 07 698 57 00 50.0 7. 0 7 77 87 770 6 60 07.5 0.8 90 6 76 9 07 698 57 00 50.0 55.6 90 6 76 9 07 698 57 00 50.00 50.6 60 58 8 07 957 6 5 5 97 0.98 555. 60 58 8 07 957 6 5 5 97 0.88 7000 60. 60 58 8 07 957 6 5 5 97 0.8 65.69 60 58 8 07 957 6 5 5 97 0.75 696.90 90 6 76 9 07 698 57 00 50 0.7 750.6 0 7 77 87 770 6 60 07 0.7 807.5 60 58 8 07 957 6 5 5 97 0.6 896.8 570 856 579 80 8 708 59 65 0.6 998.90 60 58 8 07 957 6 5 5 97 0.9 0. 90 6 76 9 07 698 57 00 50 0.5 07.8 0 79 68 9 87 56 07 95 99 0.7 0.7 0 79 68 9 87 56 07 95 99 0.5 7.0 0 79 68 9 87 56 07 95 99 0.0 7. 60 78 560 0 7 5 0 99 886 0.9 7. 60 78 560 0 7 5 0 99 886 0.9 KT-07 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 KT-07 MAX.7 60 808 6 507 99 66 08 96 97.5 5 60 FS.6 70 76 567 7 0 08 9 890 7.7.8 50 0 87 687 567 06 077 08 9. 900.6 0 9 755 60 505 5 6 0 997.6 5. 90 6 09 97 808 507 97 98 5.6 6.69 070 656 95 80 8 068 990 88 89 5.00 9800 8.0 00 90 7 600 86 9 8 0 985 5.00 0500 KT-07 0.05 00 80 96 7 59 6 96 75 68.0 5.5 FS 600 0.97 0 58 85 90 7 76 0 877 80 0.59.7 0 9 06 87 65 88 09 80 70 6.50 00.9 0 9 06 87 65 88 09 80 70.8 5.09 560 68 9 00 8 5 8 90 87.00 00 6.7 560 68 9 00 8 5 8 90 87 0.7 9.0 560 68 9 00 8 5 8 90 87 8.5 00.8 560 68 9 00 8 5 8 90 87 8.00 6. 70 96 56 9 706 55 09 860 79 8.00 5800 9.7 50 096 698 70 6 50 79 0 8.00.9 5000 000 6 096 58 9 8 05 8.00 7000.9 5000 000 6 096 58 9 8 05 6..76 50 8 557 60 9 87 69 506 5 0.9 8800 56.0 50 8 557 60 9 87 69 506 5 8.7 9800 KT-07 59.76 5000 000 6 096 58 9 8 05 8.67 7.9 5000 000 6 096 58 9 8 05 7.0 8.9 50 68 76 7 6 689 9 7 8 6.59 90.9 50 68 76 7 6 689 9 7 8 5.9 99.75 5000 000 6 096 58 9 8 05 5.9. 50 68 76 7 6 689 9 7 8.8 5.69 560 5 07 760 9 9 699 00.65.79 5000 000 6 096 58 9 8 05.65 58.8 50 68 76 7 6 689 9 7 8.50 8.97 50 9 60 6 80 598 8.50 98.7 50 8 557 60 9 87 69 506 5.50. 50 9 60 6 80 598 8.6 6. 5000 000 6 096 58 9 8 05.0. 00 FS 0000 6.69 50 68 76 7 6 689 9 7 8.9 09.05 5000 000 6 096 58 9 8 05.9. 50 8 557 60 9 87 69 506 5.6 0.6 50 8 557 60 9 87 69 506 5.9 0
KT-07 KT-07 SELECTION TABLE 50.9 50 68 76 7 6 689 9 7 8. 0.75 80 FS 500.6 50 68 76 7 6 689 9 7 8.9 550.98 5000 000 6 096 58 9 8 05. 598.9 5000 000 6 096 58 9 8 05.0 65.70 50 68 76 7 6 689 9 7 8.00 695.6 5000 000 6 096 58 9 8 05.00 75. 560 5 07 760 9 9 699 00.00 80.87 5000 000 6 096 58 9 8 05 0.96 850.7 5000 000 6 096 58 9 8 05 0.9 900.0 5000 000 6 096 58 9 8 05 0.86 0000 999.97 560 5 07 760 9 9 699 00 0.88 8.0 5000 000 6 096 58 9 8 05 0.69 60.07 50 68 76 7 6 689 9 7 8 0.6 76.8 5000 000 6 096 58 9 8 05 0.5 58.6 50 68 76 7 6 689 9 7 8 0.5 85. 5000 000 6 096 58 9 8 05 0. 96.6 50 8 557 60 9 87 69 506 5 0.8 7.67 50 8 557 60 9 87 69 506 5 0. 08.9 0 76 70 80 8 765 66 55 0 0.7 KT- 08 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KT-08.7 900 0 095 9 796 97 88 90 0.5 80 FS.6 00 560 98 65 5 6 0.89 8500.8 090 7 060 9 595 78 5 68 5.58.6 600 880 600 00 9 858 7 5 77 6.50 5. 50 760 9 00 6 78 65 68 6 9.85 9000 6.69 060 8 0 00 895 579 6 0 56 9.00 9700 8.0 550 80 56 67 98 8 699 5 57 9.00 KT-08 0.05 6070 856 8 07 759 90 58 9 5.96 7.5 FS 0700 0.97 5850 680 5 900 6 09 799 89 00 0.58.7 680 50 56 87 889 005 67 577 9.5 00.9 680 50 56 87 889 005 67 577 5.96 5.09 600 8 6 07 70 7 890 570 78 0.6 50 6.7 600 8 6 07 70 7 890 570 78 7.5 9.0 6750 500 875 500 80 8 0 87 770 7.0 00.8 6750 500 875 500 80 8 0 87 770.05 6. 680 58 680 0 0 5 00 757 659 8.88 500 9.7 6750 500 875 500 80 8 0 87 770 7.6.9 700 590 55 9 58 89 5 9 07 6.7 5500.9 700 590 55 9 58 89 5 9 07..76 550 00 79 500 5 70 5 5 8.9 6600 56.0 550 00 79 500 5 70 5 5 8.90 800 KT-08 59.76 700 590 55 9 58 89 5 9 07.8.7 FS 9500 7.9 700 590 55 9 58 89 5 9 07 0.66 8.9 770 676 5576 57 780 985 69 85 68 9.76 90.9 770 676 5576 57 780 985 69 85 68 8.80 99.75 700 590 55 9 58 89 5 9 07 7.69 0900. 770 676 5576 57 780 985 69 85 68 7.8 5.69 860 6688 608 557 576 5 000 557 0 6.89.79 700 590 55 9 58 89 5 9 07 5. 58.8 770 676 5576 57 780 985 69 85 68 5.50 8.97 800 6 5807 560 978 50 87 99 5.50 98.7 550 00 79 500 5 70 5 5.9. 800 6 5807 560 978 50 87 99 5. 000 6. 700 590 55 9 58 89 5 9 07.5 6.69 770 676 5576 57 780 985 69 85 68. 09.05 700 590 55 9 58 89 5 9 07.5. 550 00 79 500 5 70 5 5.
KT- 08 SELECTION TABLE KT-08 50.9 770 676 5576 57 780 985 69 85 68. 500.6 770 676 5576 57 780 985 69 85 68.9 550.98 700 590 55 9 58 89 5 9 07.67 598.9 700 590 55 9 58 89 5 9 07.5 65.70 770 676 5576 57 780 985 69 85 68.7 695.6 700 590 55 9 58 89 5 9 07. 75. 860 6688 608 557 576 5 000 557 0.8 80.87 700 590 55 9 58 89 5 9 07. 850.7 700 590 55 9 58 89 5 9 07.08 900.0 700 590 55 9 58 89 5 9 07.0 0.75 80 FS 00 999.97 860 6688 608 557 576 5 000 557 0.0 8.0 700 590 55 9 58 89 5 9 07.0 60.07 770 676 5576 57 780 985 69 85 68 0.95 76.8 700 590 55 9 58 89 5 9 07 0.78 58.6 770 676 5576 57 780 985 69 85 68 0.76 85. 700 590 55 9 58 89 5 9 07 0.6 96.6 7000 5600 5056 667 6 9 979 87 0.55 7.67 550 00 79 500 5 70 5 5 0. 08.9 5070 056 66 80 9 67 6 57 080 0.6 KT- 09 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 KT-09 MAX.7 50 00 070 8 6 9 0 809 7 59.7 0 00 FS 800.6 690 75 88 7 90 996 9 59.9.8 500 60 756 67 0 68 88 59.87.6 5000 000 6 096 58 9 8 05 50.70 5. 580 68 96 87 598 999 780 7 8 50.7 6.69 550 0 70 89 658 6 9 50.00 8600 8.0 970 976 590 077 565 78 5 09 50.00 900 KT-09 0.05 000 860 767 6800 66 565 880 0 85 77. 5 60 FS 050 0.97 980 786 700 655 6087 507 70 8 0 68.9.7 950 7560 686 600 585 877 5 0 878 59.07 0900.9 950 7560 686 600 585 877 5 0 878 5. 5.09 00 8 7 6760 679 5 85 5 6 5. 700 6.7 00 8 7 6760 679 5 85 5 6 6.08 9.0 00 8 7 6760 679 5 85 5 6 0.59 600.8 50 9080 898 7567 708 5858 5 80 657 8.76 6. 0890 87 7866 760 67 56 5 6 69.7 900 9.7 50 9080 898 7567 708 5858 5 80 657 0.00.9 0890 87 7866 760 67 56 5 6 69 0.00 800.9 000 9600 8667 8000 70 69 57 506 9 0.00 6600.76 880 7056 67 5880 56 55 0 75 69 7.6 56.0 880 7056 67 5880 56 55 0 75 69.7 7500 8700 KT-09 60.6 000 9600 8667 8000 70 69 57 506 9 0.6 5.5 FS 7.00 000 9600 8667 8000 70 69 57 506 9 7.0 8.78 000 9600 8667 8000 70 69 57 506 9 5.0 90.5 000 9600 8667 8000 70 69 57 506 9.76 00.7 000 9600 8667 8000 70 69 57 506 9.0.85 000 9600 8667 8000 70 69 57 506 9 0.9 7.7 000 9600 8667 8000 70 69 57 506 9 0.00 0.6 000 9600 8667 8000 70 69 57 506 9 0.00 00 59.68 000 9600 8667 8000 70 69 57 506 9 0.00 7.69 000 9600 8667 8000 70 69 57 506 9 0.00 95. 000 9600 8667 8000 70 69 57 506 9 9.0 8.70 000 9600 8667 8000 70 69 57 506 9 7.77 5.0 000 9600 8667 8000 70 69 57 506 9 7.5 87.6 000 9600 8667 8000 70 69 57 506 9 6.8 99. 880 7056 67 5880 56 55 0 75 69.6 75.95 880 7056 67 5880 56 55 0 75 69.7 7.05 880 7056 67 5880 56 55 0 75 69.77
KA - 09 SELECTION TABLE KT-09 50.7 000 9600 8667 8000 70 69 57 506 9.97. 00 FS 00 555.0 000 9600 8667 8000 70 69 57 506 9.68 596.75 000 9600 8667 8000 70 69 57 506 9.50 650. 9600 8667 8000 70 69 57 506 9.50 699.0 000 9600 8667 8000 70 69 57 506 9.50 75. 000 9600 8667 8000 70 69 57 506 9.50 806.5 000 9600 8667 8000 70 69 57 506 9. 85.6 000 9600 8667 8000 70 69 57 506 9.9 95.65 000 9600 8667 8000 70 69 57 506 9.0 05. 000 9600 8667 8000 70 69 57 506 9.8.96 000 9600 8667 8000 70 69 57 506 9.67 57.77 000 9600 8667 8000 70 69 57 506 9.8 0.98 000 9600 8667 8000 70 69 57 506 9. 65.8 880 7056 67 5880 56 55 0 75 69 0.8 76.0 000 9600 8667 8000 70 69 57 506 9.06 067.56 000 9600 8667 8000 70 69 57 506 9 0.90 5.0 000 9600 8667 8000 70 69 57 506 9 0.8 596.0 000 9600 8667 8000 70 69 57 506 9 0.7 706.85 880 7056 67 5880 56 55 0 75 69 0.5 98.7 880 7056 67 5880 56 55 0 75 69 0.0 67.7 850 686 65 5680 576 97 077 66 96 0. KT- 0 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KT-0.8 660 588 77 07 09 6 8 7 86.6 55 50 FS 50.8 70 578 5 80 77 7 59 077 967 8.68. 790 6 578 587 90 09 79 7 5 78.96 5. 90 7 660 609 5659 77 7 889 75 7. 7.0 80 696 5865 5 508 9 885 55 7.00 800 KT-0 0.7 0 0568 95 8807 880 688 6 56 5 9.8 9500. 550 0 09 000 98 789 79 67 67 95.9. 550 0 09 000 98 789 79 67 67 87. 00 5.6 0 58 008 9607 89 77 6895 6 59 7.7 7.05 600 880 69 07 9969 80 770 685 6606 7.85 700 9.6 600 880 69 07 9969 80 770 685 6606 6.8 0.85 50 8 058 007 980 790 75 655 68 55.87 80 FS 650.67 70 7 80 7 06 886 80 79 70 55.09 7.75 70 7 80 7 06 886 80 79 70 7.00 0050.09 8950 560 687 6 7 978 9067 806 7776.9 000 6. 70 7 80 7 06 886 80 79 70 5.00 5800 5.6 9580 566 05 006 968 8 80 5.00 8.7 90 8 007 97 86 779 6656 599 5708 9.95 7700 KT-0 5.5 0590 67 87 77 79 067 985 876 89 0. 5000 58.99 0590 67 87 77 79 067 985 876 89 6.6 66.98 0590 67 87 77 79 067 985 876 89.85 5500 78.50 0590 67 87 77 79 067 985 876 89 7.7 87. 0590 67 87 77 79 067 985 876 89.8 98.9 0590 67 87 77 79 067 985 876 89.56.06 0590 67 87 77 79 067 985 876 89 8.70 0.98 9580 566 05 006 968 8 80 6.77. 0590 67 87 77 79 067 985 876 89 5.00 7.5 FS 6.6 0590 67 87 77 79 067 985 876 89 5.00 75.5 9580 566 05 006 968 8 80 5.00 98.7 0590 67 87 77 79 067 985 876 89 5.00 6000.67 650 70 567 06 7 059 9 888.9 9.5 0590 67 87 77 79 067 985 876 89. 69.5 650 70 567 06 7 059 9 888.89 05. 9580 566 05 006 968 8 80 9.50 8. 9580 566 05 006 968 8 80 7.56 0.6 90 8 007 97 86 779 6656 599 5708 5.09
KA-0 SELECTION TABLE KT-.88 0590 67 87 77 79 067 985 876 89 #REF 6000 9.7 0590 67 87 77 79 067 985 876 89 5.7 57. 0590 67 87 77 79 067 985 876 89.76 607.70 0590 67 87 77 79 067 985 876 89.76 69.5 9580 566 05 006 968 8 80.76 709.0 650 70 567 06 7 059 9 888.7 79.98 0590 67 87 77 79 067 985 876 89. 80.5 650 70 567 06 7 059 9 888.9 8.75 0590 67 87 77 79 067 985 876 89.8 860.0 9580 566 05 006 968 8 80.5.7 FS 00. 9580 566 05 006 968 8 80.0 079.0 9580 566 05 006 968 8 80.8.0 650 70 567 06 7 059 9 888.7 6.5 9580 566 05 006 968 8 80.7 55.6 650 70 567 06 7 059 9 888.7 796.5 0590 67 87 77 79 067 985 876 89.78 080.5 9580 566 05 006 968 8 80.6 97.0 9580 566 05 006 968 8 80.8 758.6 9580 566 05 006 968 8 80.0 9. 90 8 007 97 86 779 6656 599 5708 0.7 KT- SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 KT- 0 000 000 MAX.80 00 88 7967 75 680 569 578 69 56 8. 75 80 FS 50.50 050 960 870 80 76 69 5766 58 95 8.9 5.66 780 0 995 987 85 7 659 586 565 07.6 KT-.05 970 56 98 87 9 996 90 800 7907.7 00.5 970 56 98 87 9 996 90 800 7907.5 5.57 860 608 89 7 07 95 877 7770 79 89. 700 7.8 500 9600 7696 6 570 65 7 06 005 07.88 9.6 500 9600 7696 6 570 65 7 06 005 95.0 0 80 FS 650.7 500 9600 7696 6 570 65 7 06 005 85.77 0050.68 500 9600 7696 6 570 65 7 06 005 75.5 000 8.9 500 9600 7696 6 570 65 7 06 005 6.5 5800.9 500 9600 7696 6 570 65 7 06 005 58.0 7700 7.87 500 9600 7696 6 570 65 7 06 005 58.00 7.5 500 9600 7696 6 570 65 7 06 005 58.00 KT- 5.87 500 9600 7696 6 570 65 7 06 005 7. 5 60 FS 59.79 500 9600 7696 6 570 65 7 06 005.5 5000 67.89 500 9600 7696 6 570 65 7 06 005 7.9 79.56 500 9600 7696 6 570 65 7 06 005.90 5500 88.0 500 9600 7696 6 570 65 7 06 005 8.7 00.6 500 9600 7696 6 570 65 7 06 005 8.70 57500 5.60 500 9600 7696 6 570 65 7 06 005 8.70 6.0 500 9600 7696 6 570 65 7 06 005 8.75 5.0 500 9600 7696 6 570 65 7 06 005.9 6.8 500 9600 7696 6 570 65 7 06 005.00 8.57 500 9600 7696 6 570 65 7 06 005 9.86 0.0 500 9600 7696 6 570 65 7 06 005 8.00.5 500 9600 7696 6 570 65 7 06 005 6.98 5.88 500 9600 7696 6 570 65 7 06 005. 68. 500 9600 7696 6 570 65 7 06 005.5 8.07 500 9600 7696 6 570 65 7 06 005.0 99.7 500 9600 7696 6 570 65 7 06 005 9.08 KT- 5. 500 9600 7696 6 570 65 7 06 005 6.7 98.8 500 9600 7696 6 570 65 7 06 005 6.0 557.8 500 9600 7696 6 570 65 7 06 005 6.0 600.5 500 9600 7696 6 570 65 7 06 005 6. 6.8 500 9600 7696 6 570 65 7 06 005 5.90 6000 696.85 500 9600 7696 6 570 65 7 06 005 5.6 7.7 500 9600 7696 6 570 65 7 06 005 5. 80.6 500 9600 7696 6 570 65 7 06 005.7 8.7 500 9600 7696 6 570 65 7 06 005.5 90.79 500 9600 7696 6 570 65 7 06 005. 09. 500 9600 7696 6 570 65 7 06 005.69 5.5 FS 0.5 500 9600 7696 6 570 65 7 06 005..5 500 9600 7696 6 570 65 7 06 005.06 8.6 500 9600 7696 6 570 65 7 06 005.66 65. 500 9600 7696 6 570 65 7 06 005. 79.8 500 9600 7696 6 570 65 7 06 005. 00.8 500 9600 7696 6 570 65 7 06 005.86 7.9 500 9600 7696 6 570 65 7 06 005.79 67.8 500 9600 7696 6 570 65 7 06 005.
KT- SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KT-.80 850 50 09 00 8 968 868 77 78.7 0 80 FS 0000.50 980 587 0 7 85 00 99 8 8 9.9 5.66 680 8 68 50 0 706 085 965 907 77.6 800 KT-.5 8000 000 77 5 59 96 88 670 559 99.8 00 7.9 6060 888 606 00 8 86 75 55 797 59.6 500 9.98 8000 000 77 5 59 96 88 670 559.7 0.6 8000 000 77 5 59 96 88 670 559 0. 55 50 FS 900. 8000 000 77 5 59 96 88 670 559 8. 0.7 8000 000 77 5 59 96 88 670 559 9.08 5000 KT- 6.0 8000 000 77 5 59 96 88 670 559 85.55 80 FS 57900 50. 8000 000 77 5 59 96 88 670 559 78.8 60700 59.8 8000 000 77 5 59 96 88 670 559 66.9 69. 8000 000 77 5 59 96 88 670 559 56.9 6000 77.6 8000 000 77 5 59 96 88 670 559 50.8 87. 8000 000 77 5 59 96 88 670 559 5.9 68500 0.0 8000 000 77 5 59 96 88 670 559 5.00 5.00 8000 000 77 5 59 96 88 670 559 5.00.86 8000 000 77 5 59 96 88 670 559 5.00 7700 8.0 8000 000 77 5 59 96 88 670 559 0.7 57.05 8000 000 77 5 59 96 88 670 559 5.8 7. 8000 000 77 5 59 96 88 670 559.5 05.5 8000 000 77 5 59 96 88 670 559 7.0 9.8 8000 000 77 5 59 96 88 670 559.7 58.6 8000 000 77 5 59 96 88 670 559.78 7.6 8000 000 77 5 59 96 88 670 559 0.66. 8000 000 77 5 559 96 88 670 559 6. KT- 68.0 8000 000 77 5 59 96 88 670 559 7.6 7.5 FS 77500 97. 8000 000 77 5 59 96 88 670 559 5.86.5 8000 000 77 5 59 96 88 670 559. 7.9 8000 000 77 5 59 96 88 670 559.00 97.90 8000 000 77 5 59 96 88 670 559.00.0 8000 000 77 5 59 96 88 670 559.65 50.0 8000 000 77 5 59 96 88 670 559.76 50.08 8000 000 77 5 59 96 88 670 559. 58.78 8000 000 77 5 59 96 88 670 559 0. 67.7 8000 000 77 5 59 96 88 670 559 9.0 68.0 8000 000 77 5 59 96 88 670 559 8.6 7.7 8000 000 77 5 59 96 88 670 559 8.8 85.7 8000 000 77 5 59 96 88 670 559 7. 89. 8000 000 77 5 59 96 88 670 559 6.60 99.5 8000 000 77 5 59 96 88 670 559 5.95.80 8000 000 77 5 59 96 88 670 559 5.5 59.55 8000 000 77 5 59 96 88 670 559 5.09 9. 8000 000 77 5 59 96 88 670 559.7 55.9 8000 000 77 5 59 96 88 670 559.05 57.5 8000 000 77 5 59 96 88 670 559.8 79. 8000 000 77 5 59 96 88 670 559.7 90.5 8000 000 77 5 59 96 88 670 559.06 68.58 8000 000 77 5 59 96 88 670 559.7 90.0 8000 000 77 5 59 96 88 670 559.58 KT- SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KT-.60 7050 60 958 80 679 96 9 5 00..5 90 8 987 8099 5086 986 8 99 0. 65 5 FS 000 5. 70 576 9 7 96 67 577 98 06 6. KT-.68 50000 0000 6 0960 5806 9 77 057 78.0 500 6.5 50000 0000 6 0960 5806 9 77 057 5.57 8650 9. 50000 0000 6 0960 5806 9 77 057 98.9 75 50 FS 0.8 50000 0000 6 0960 5806 9 77 057 86.7 5000.06 50000 0000 6 0960 5806 9 77 057 58.5 0.7 50000 0000 6 0960 5806 9 77 057 6. 56600 5
KT- KT - SELECTION TABLE.7 50000 0000 6 0960 5806 9 77 057 #REF 0 00 FS 66600 7. 50000 0000 6 0960 5806 9 77 057 09. 55.88 50000 0000 6 0960 5806 9 77 057 9.70 89700 66.7 50000 0000 6 0960 5806 9 77 057 78.8 7700 76.5 50000 0000 6 0960 5806 9 77 057 67.9 8.9 50000 0000 6 0960 5806 9 77 057 6. 79000 97.7 50000 0000 6 0960 5806 9 77 057 5.00 08.0 50000 0000 6 0960 5806 9 77 057 5.00 86000.9 50000 0000 6 0960 5806 9 77 057 5.00 6. 50000 0000 6 0960 5806 9 77 057 5.00 9680 5.6 50000 0000 6 0960 5806 9 77 057 8.00 7.6 50000 0000 6 0960 5806 9 77 057. 0800 0.06 50000 0000 6 0960 5806 9 77 057 6.6 5. 50000 0000 6 0960 5806 9 77 057 9.0 KT- 6.8 50000 0000 6 0960 5806 9 77 057.5 60 FS 0 9.8 50000 0000 6 0960 5806 9 77 057.50 0.0 50000 0000 6 0960 5806 9 77 057.50 690 5. 50000 0000 6 0960 5806 9 77 057.08 7.8 50000 0000 6 0960 5806 9 77 057 0.76 7800 5. 50000 0000 6 0960 5806 9 77 057 8.5 7.07 50000 0000 6 0960 5806 9 77 057 6.7 5.5 50000 0000 6 0960 5806 9 77 057.8 557.85 50000 0000 6 0960 5806 9 77 057.9 9500 67.96 50000 0000 6 0960 5806 9 77 057.56 65.8 50000 0000 6 0960 5806 9 77 057.87 70.65 50000 0000 6 0960 5806 9 77 057.06 768.76 50000 0000 6 0960 5806 9 77 057 0.0 855.96 50000 0000 6 0960 5806 9 77 057 9.07 97.09 50000 0000 6 0960 5806 9 77 057 7.98 000 07.7 50000 0000 6 0960 5806 9 77 057 7. 5.0 50000 0000 6 0960 5806 9 77 057 6.78 9.9 50000 0000 6 0960 5806 9 77 057 5.99 7.7 50000 0000 6 0960 5806 9 77 057 5.0 695. 50000 0000 6 0960 5806 9 77 057.58 KA - SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX POWER Kw KT-.8 0000 000 889 6667 768 065 99 70 6 6.9. 80 096 75 5 60 9675 89 6 56 79.6 50 55 FS 6000 5. 6700 760 7 896 0 987 96 80. KT-.5 9050 700 6586 6067 5588 658 8 80 70 7.06 68000 7.9 9050 700 6586 6067 5588 658 8 80 70 99.7 7500 9.98 8580 6866 699 570 56 99 067 65 50 6.86 0 80 FS.6 08000 8600 78007 7000 6687 557 5675 5957 7 80.07 78000 5. 0000 800 795 68667 6777 56 98 80 65.86 85000 0.7 08000 8600 78007 7000 6687 557 5675 5957 7 67.8 89000 KT- 55.5 08000 8600 78007 7000 6687 557 5675 5957 7 0.77 6.5 08000 8600 78007 7000 6687 557 5675 5957 7 7.59 7.9 08000 8600 78007 7000 6687 557 5675 5957 7 9.5 05000 78.8 08000 8600 78007 7000 6687 557 5675 5957 7.9 88.7 08000 8600 78007 7000 6687 557 5675 5957 7 6. 8000 9. 08000 8600 78007 7000 6687 557 5675 5957 7 9.86 08.9 08000 8600 78007 7000 6687 557 5675 5957 7 0. 7.0 08000 8600 78007 7000 6687 557 5675 5957 7 95.0 8000.77 08000 8600 78007 7000 6687 557 5675 5957 7 95.00 55 5 FS.68 08000 8600 78007 7000 6687 557 5675 5957 7 95.00.86 08000 8600 78007 7000 6687 557 5675 5957 7 95.00 000 55.67 08000 8600 78007 7000 6687 557 5675 5957 7 95.00 66.88 08000 8600 78007 7000 6687 557 5675 5957 7 95.00 75.9 08000 8600 78007 7000 6687 557 5675 5957 7 90.85 80.9 08000 8600 78007 7000 6687 557 5675 5957 7 88. 55000.8 08000 8600 78007 7000 6687 557 5675 5957 7 7. 6
KT- SELECTION TABLE KT- 08.6 08000 8600 78007 7000 6687 557 5675 5957 7 6. 80 FS 55000 7.0 08000 8600 78007 7000 6687 557 5675 5957 7 59.0 5.6 08000 8600 78007 7000 6687 557 5675 5957 7 5.8 69000 8.6 08000 8600 78007 7000 6687 557 5675 5957 7 7. 06.9 08000 8600 78007 7000 6687 557 5675 5957 7.69 0.65 08000 8600 78007 7000 6687 557 5675 5957 7.70 78000 70.97 08000 8600 78007 7000 6687 557 5675 5957 7.70 90.0 08000 8600 78007 7000 6687 557 5675 5957 7.98 9000.57 08000 8600 78007 7000 6687 557 5675 5957 7 8.75 76.98 08000 8600 78007 7000 6687 557 5675 5957 7 5. 07000 5.00 08000 8600 78007 7000 6687 557 5675 5957 7.99 59.8 08000 8600 78007 7000 6687 557 5675 5957 7 8.5 6.6 08000 8600 78007 7000 6687 557 5675 5957 7 6.8 678.0 08000 8600 78007 7000 6687 557 5675 5957 7.7 75.8 08000 8600 78007 7000 6687 557 5675 5957 7.0 785. 980 7875 70 6567 6095 50808 700 889 09 9.5 85.78 08000 8600 78007 7000 6687 557 5675 5957 7 9.66 000 887.6 08000 8600 78007 7000 6687 557 5675 5957 7 8.88 986.9 08000 8600 78007 7000 6687 557 5675 5957 7 7.00 6.5 08000 8600 78007 7000 6687 557 5675 5957 7 5.0 6. 08000 8600 78007 7000 6687 557 5675 5957 7.6 0.8 08000 8600 78007 7000 6687 557 5675 5957 7.96 KT- 5 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KT-5 750.8 6800 580 680 00 0 5 005 757 6590 750.0. 6600 980 9 067 8 79 97 6 577 6. 50 55 FS 90000 5. 66000 5800 767 000 0867 065 579 8085 708 57. KT-5 000.75 6750 900 86 778 79 6058 5586 968 7907 65.96 97600 6. 6750 900 86 778 79 6058 5586 968 7907 57.7 0000 8.87 8800 00 005 95 859 769 66 5906 56955 559.67 000 0.6 5900 670 058 9767 90 750 69809 6085 59869 55. 65 5 FS.67 66500 00 060 000 0096 8595 79665 7085 68 55. 000 8.9 58000 600 05 978 858 75598 67 68 5.8 KT-5 5.6 98000 5800 0 000 60 09 977 855 87 9.5 75 80 FS 00 60.7 98000 5800 0 000 60 09 977 855 87 7.7 7.9 98000 5800 0 000 60 09 977 855 87 85.7 58000 77.8 98000 5800 0 000 60 09 977 855 87 6.5 8.9 98000 5800 0 000 60 09 977 855 87.56 69000 9.89 98000 5800 0 000 60 09 977 855 87. 06.80 98000 5800 0 000 60 09 977 855 87 9.05 8000 5. 98000 5800 0 000 60 09 977 855 87 77.99 0.6 98000 5800 0 000 60 09 977 855 87 57.0 09000.95 98000 5800 0 000 60 09 977 855 87 5. 6.8 98000 5800 0 000 60 09 977 855 87 5. KT-5 95.57 98000 5800 0 000 60 09 977 855 87 5.7 000.6 98000 5800 0 000 60 09 977 855 87 5.8 6.90 98000 5800 0 000 60 09 977 855 87 0.78 67.0 98000 5800 0 000 60 09 977 855 87 9.07 000 9.8 98000 5800 0 000 60 09 977 855 87 8.68 6.07 98000 5800 0 000 60 09 977 855 87 75.0 56000 9.60 98000 5800 0 000 60 09 977 855 87 70. 7. 98000 5800 0 000 60 09 977 855 87 65.86.6 98000 5800 0 000 60 09 977 855 87 57.90 69.56 98000 5800 0 000 60 09 977 855 87 57.90 7000 5.5 98000 5800 0 000 60 09 977 855 87 57.90 568.08 98000 5800 0 000 60 09 977 855 87 5.0 6.7 98000 5800 0 000 60 09 977 855 87 9.99 0 00 FS 667.6 98000 5800 0 000 60 09 977 855 87 6.0 7.5 98000 5800 0 000 60 09 977 855 87.0 770.96 98000 5800 0 000 60 09 977 855 87 9.86 87.07 98000 5800 0 000 60 09 977 855 87 6.7 8000 87.8 98000 5800 0 000 60 09 977 855 87 5.7 968.0 98000 5800 0 000 60 09 977 855 87.75 095.90 98000 5800 0 000 60 09 977 855 87 8.0 5. 98000 5800 0 000 60 09 977 855 87 7. 76.0 98000 5800 0 000 60 09 977 855 87. 7
KT - 6 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KT-6 750.8 6850 980 899 77900 75 600 55909 97 798 5. 550 ONLY. 0 88896 8060 7080 68805 575 567 785 5597 06.5 SOLID MALE 5. 05700 8560 765 7067 659 5555 5057 979 7 860.6 SHAFT KT-6 000.59 0500 6800 500 0 0 0865 0078 8957 8677 097.6 50 55 FS 6.96 0080 60 586 5 950 09 95780 858 8 898.0 9.7 500 0076 8070 668 595 96 97 0677 0675 965.8 0.7 60 096 9007 75 69 580 5895 966 07969 965.. 500 0076 8070 668 595 96 97 0677 0675 789.7 9.8 8560 896 0698 90 7685 77 6660 50 70 77. KT-6 55.5 5650 80 57 500 859 80 687 6 707 658.8 0 80 FS 6.5 7570 0096 7 507 7 979 7960 597 500 60.5 7.9 7570 0096 7 507 7 979 7960 597 500 59.0 8.59 970 5776 85099 67 09 076 8886 67966 6970 95.09 9.6 7570 0096 7 507 7 979 7960 597 500.6 96.00 7570 0096 7 507 7 979 7960 597 500 05.08 ON.58 7570 0096 7 507 7 979 7960 597 500 8.5 REQUEST 7.0 970 5776 85099 67 09 076 8886 67966 6970 8.0 6.6 8900 0 09787 859 6557 68 055 85 75995 5.6 66.88 07970 676 9670 7980 56 0565 950 760 6707 5.5 KT-6.8 500 60808 5757 0067 796 779 579 999 85068 6.8 55 80 FS 6.0 8900 0 09787 859 6557 68 055 85 75995 6. 50.8 500 60808 5757 0067 796 779 579 999 85068.6 86.6 8900 0 09787 859 6557 68 055 85 75995 86. 0.0 500 60808 5757 0067 796 779 579 999 85068 85.99 8.88 8900 0 09787 859 6557 68 055 85 75995 57.6 9.97 8900 0 09787 859 6557 68 055 85 75995 5.8 9.88 8900 0 09787 859 6557 68 055 85 75995 5. 8.00 500 60808 5757 0067 796 779 579 999 85068 0.85 8.70 8900 0 09787 859 6557 68 055 85 75995 0.56 5.7 8900 0 09787 859 6557 68 055 85 75995 0.00 589. 8900 0 09787 859 6557 68 055 85 75995 0.00 605.87 8900 0 09787 859 6557 68 055 85 75995 09.88 67.50 500 60808 5757 0067 796 779 579 999 85068 09.8 70.6 07970 676 9670 7980 56 0565 950 760 6707 87.89 70.97 8900 0 09787 859 6557 68 055 85 75995 89.8 906.8 07970 676 9670 7980 56 0565 950 760 6707 69.88 KT- 7 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KT-7 750.8 07500 66000 987 8 88 07097 998 8898 856 0.5 750 ONLY. 9750 57880 5 567 98 0858 96 8979 8098 965. SOLID MALE 5. 87700 5060 557 5 6 96877 89809 7987 770 58. SHAFT KT-7 000.59 800 070 7757 5600 7957 988 8876 65 5769 00.8 50 ONLY 6.96 55500 800 5677 7000 0 88 70096 577 5876 59.8 SOLID MALE 9.7 55500 800 5677 7000 0 88 70096 577 5876 7. SHAFT 0.7 780 9907 7008 97 80 9950 7887 5908 50 7. ON. 00 5550 098 9667 7570 968 6 8906 855 0.5 REQUEST 9.8 700 860 0509 8800 67 868 09 7987 75 090.8 KT-7 5.5 500000 00000 6 09598 58065 9 766 0570 986.0 6.06 500000 00000 6 09598 58065 9 766 0570 88. 70.97 500000 00000 6 09598 58065 9 766 0570 79.87 77.78 500000 00000 6 09598 58065 9 766 0570 665.97 86.79 500000 00000 6 09598 58065 9 766 0570 596.80 65 5 FS 95.99 500000 00000 6 09598 58065 9 766 0570 59.6.57 500000 00000 6 09598 58065 9 766 0570 6.6 0.56 500000 00000 6 09598 58065 9 766 0570 68.5 8.50 500000 00000 6 09598 58065 9 766 0570 0.09 57.5 500000 00000 6 09598 58065 9 766 0570 9.60 8
KT- 7 SELECTION TABLE KT-7 99.6 500000 00000 6 09598 58065 9 766 0570 #REF.0 500000 00000 6 09598 58065 9 766 0570 67.58 5.67 500000 00000 6 09598 58065 9 766 0570 6. 69.68 500000 00000 6 09598 58065 9 766 0570 0. 97. 500000 00000 6 09598 58065 9 766 0570 08.8.8 500000 00000 6 09598 58065 9 766 0570 9.0 5.59 500000 00000 6 09598 58065 9 766 0570 79.65 77.0 500000 00000 6 09598 58065 9 766 0570 6.67.65 500000 00000 6 09598 58065 9 766 0570 6.89 ON 7. 500000 00000 6 09598 58065 9 766 0570 0.9 75 80 FS REQUEST 5.67 500000 00000 6 09598 58065 9 766 0570. 579.95 500000 00000 6 09598 58065 9 766 0570 07.05 59.7 500000 00000 6 09598 58065 9 766 0570 0.9 65.76 500000 00000 6 09598 58065 9 766 0570 99. 709.6 500000 00000 6 09598 58065 9 766 0570 87.5 77. 500000 00000 6 09598 58065 9 766 0570 85.6 KT- 8 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 KT-8 500 000 000 0 000 000 MAX.8 50550 800 596 700 7059 8099 6777 970 85 057. ONLY. 70 66696 0787 7 06 706 59507 860 6795 9.5 000 SOLID MALE 5. 700 5680 906 00 967 6665 57 96 09 58.8 SHAFT KT-8 750.59 5000 6800 7609 7 60 6890 98 70 787 76.6 6.96 9560 9668 5786 007 06786 557 706 08 007.7 ONLY 9.7 60050 80 75 005 785 0995 875 5555 6 7.9 550 SOLID MALE 0.7 690 5059 56 099 905 590 08 6879 596 6. SHAFT. 60050 80 75 005 785 0995 875 5555 6 895. 9.8 700 57 557 7600 685 6 08 9995 8.6 KT-8 000 55.7 970 75779 6875 69 58656 88898 55 008 8869 760. 6.79 006080 8086 7667 67070 6960 5967 878 89 85 608.7 75. 006080 8086 7667 67070 6960 5967 878 89 85 8.0 79. 057950 8660 769 70500 655077 5609 50696 509 0 8. 0N 87.5 006080 8086 7667 67070 6960 5967 878 89 85 90.8 50 55 FS REQUEST 9.0 60 900888 869 75070 6978 588 58809 7996 6089 66.7.6 0000 9000 80 760000 70588 58887 5555 8506 67788 08.5 0.9 60 900888 869 75070 6978 588 58809 7996 6089 89. 60.0 0750 85690 7767 700 665 5585 55 55809 956 69. KT-8.8 0000 9000 80 760000 70588 58887 5555 8506 67788 668.7 0 80 FS ON 50.8 0000 9000 80 760000 70588 58887 5555 8506 67788 56. REQUEST 86.6 0000 9000 80 760000 70588 58887 5555 8506 67788 9.66 5.5 0000 9000 80 760000 70588 58887 5555 8506 67788 8.66 8.88 0000 9000 80 760000 70588 58887 5555 8506 67788 7.7 66.7 0000 9000 80 760000 70588 58887 5555 8506 67788 86.0 06.77 0000 9000 80 760000 70588 58887 5555 8506 67788 8.00 8.8 0000 9000 80 760000 70588 58887 5555 8506 67788 5.6 95. 0000 9000 80 760000 70588 58887 5555 8506 67788 85.7 5.7 0000 9000 80 760000 70588 58887 5555 8506 67788 7.56 605.87 0000 9000 80 760000 70588 58887 5555 8506 67788.6 67.0 9000 80 760000 70588 58887 5555 8506 67788.05 70.6 0000 9000 80 760000 70588 58887 5555 8506 67788 96.8 70.97 0000 9000 80 760000 70588 58887 5555 8506 67788 9.0 KT- 9 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 KT-9 500 000 000 0 000 000 MAX.8 6000 50800 55760 0667 907 5677 09 685 5895 70.9 ONLY. 600060 8008 0000 755 09708 870 555 69 5975. SOLID MALE 5. 570780 566 6 8050 5 9596 700 885 67. SHAFT KT-9 750.59 97800 7500 67756 6500 58068 806 8708 9906 887 889.9 6.96 8980 76 65 5955 557 6099 67 7950 6595 000.9 9.7 080960 86768 780758 7060 6695 55795 5706 5998 56 7. ONLY 0.7 6690 9095 80 75779 708 586679 587 8698 660 69.6 750 SOLID MALE. 080960 86768 780758 7060 6695 55795 5706 5998 56.5 SHAFT 9.8 8560 0808 98 85680 79587 6660 6957 5699 579 6.7 9
KT - 9 SELECTION TABLE KT-9 000 55.7 70500 60 5 6687 05576 88005 8580 7555 6996 #REF! 6.79 80960 8768 0805 0707 7 9689 86688 7706 70 895.6 75. 80960 8768 0805 0707 7 9689 86688 7706 70 9. 79. 900 58 7550 6950 799 98870 95 805 786 89.7 ONLY 87.5 80960 8768 0805 0707 7 9689 86688 7706 70. 50 SOLID MALE 9.0 07000 6600 6066 5 5508 069 969856 8655 8760 80. SHAFT.6 90 7059 5958 099 9808 00 0985 90707 8767 960.5 0.9 07000 6600 6066 5 5508 069 969856 8655 8760 60.0 60.0 98080 56 968 8587 9858 9958 956 8060 7969 7.6 KT-9 000 00.67 570 9876 759097 667 5080 5707 6597 0670 9997 507.0 6.9 570 9876 759097 667 5080 5707 6597 0670 9997 76.5 7.0 6070 85856 67857 507 099 959 0867 98556 95078 060.8 ON 97. 570 9876 759097 667 5080 5707 6597 0670 9997 07.8 REQUEST 0.05 6070 85856 67857 507 099 959 0867 98556 95078 898.6 5. 6070 85856 67857 507 099 959 0867 98556 95078 8.8 85.6 6070 85856 67857 507 099 959 0867 98556 95078 76. 65 5 FS. 570 9876 759097 667 5080 5707 6597 0670 9997 76. 66.5 6070 85856 67857 507 099 959 0867 98556 95078 66. 90.88 6070 85856 67857 507 099 959 0867 98556 95078 585.9 570.55 6070 85856 67857 507 099 959 0867 98556 95078 50. 600. 570 9876 759097 667 5080 5707 6597 0670 9997 50.7 680. 0050 760 59 68700 68 7058 0509 9768 9000 0.0 697.77 6070 85856 67857 507 099 959 0867 98556 95078. KT - 0 SELECTION TABLE Mn (Nm) SPEED 0 000 5 000 00 000 000 000 0 000 000 MAX KT-0 500.8 6060 685 05995 97760 90 75879 69887 659 59960 6905 ONLY. 8900 0079 9607 860087 769 666 5908 569979 8 000 SOLID MALE 5. 50 057000 956 8808 88 6895 677 56 56 0758 SHAFT KT-0 750.59 70850 76680 567967 7 80 09 0868 9766 890788 9 6.96 060 655 90 7687 7885 0655 987766 8788 879 96 ONLY 9.7 500 0078 8077 6685 5968 97 979 06779 06767 9658 000 SOLID MALE 0.7 60 0976 9008 757 698 5809 58957 9668 079696 965 SHAFT. 500 0078 8077 6685 5968 97 979 06779 06767 7897 9.8 97550 800 8899 98 898 5556 57 660 085 7678 KT-0 000 55.7 9680 577 8507 67 86 07079 8880 679506 6959 75.0 6.79 900 56 0787 7969 595690 66 00576 7887 706 670.8 75. 900 56 0787 7969 595690 66 00576 7887 706 5766.8 79. 080 565 89 98760 7998 7569 0958 87580 80889 576. ONLY 87.5 900 56 0787 7969 595690 66 00576 7887 706 96.6 550 SOLID MALE ON 9.0 690 7570 890 8087 905 75 508 99665 957 578.0 SHAFT REQUEST.6 900 9708 5679 890 0555 56586 60770 099579 065 58. 0.9 690 7570 890 8087 905 75 508 99665 957 7.0 60.0 660 57058 66 9750 76567 0566 58 8997 86 887.9 KT-0 000.9 567670 506 07990 7587 9087 909765 69750 99009 65 87.5 7.50 567670 506 07990 7587 9087 909765 69750 99009 65 88. 87.67 5690 890 8765 579 968 7677 565 800 99955. 0.68 567670 506 07990 7587 9087 909765 69750 99009 65.7.6 5690 890 8765 579 968 7677 565 800 99955 99.0 5.8 5690 890 8765 579 968 7677 565 800 99955 89. ONLY 08.9 5690 890 8765 579 968 7677 565 800 99955 68.0 50 SOLID MALE 0.6 567670 506 07990 7587 9087 909765 69750 99009 65 67.0 SHAFT 75.8 5690 890 8765 579 968 7677 565 800 99955 00.7 500.09 5690 890 8765 579 968 7677 565 800 99955. 58.5 5690 890 8765 579 968 7677 565 800 99955 5. 6.59 567670 506 07990 7587 9087 909765 69750 99009 65.6 70.86 5099660 07978 6895 9977 5768 608 009 70068 09597 890.8 70.86 5690 890 8765 579 968 7677 565 800 99955 96.5 869.6 5099660 07978 6895 9977 5768 608 009 70068 09597 78. 0
X l Ød ØQ N HOLES ØP ØR ØS j h MOTOR MOUNTING DETAILS ASPER FRAME ISI STANDARD FRAME SHAFT MOUNTING AVAILABLE B-5 TYPE MOTORS WITH RPM & POWER d F7 h j l min R P Q H8 N S X 000 RPM RPM 000 RPM 750 RPM 6.8 5 0 5 95 M-8 76 0.5 / 0.5 0.5 / 0.5 - - 7 6. 5 60 0 0 M-8 76 0. / 0.5 0. / 0.5 0 / 0.50 0. / 0. 80 9.8 6 00 65 0 M-0 8 0.75 /.0 0.75 /.0 0.5 / 0.75 0.5 / 0. 90 7. 8 5 00 65 0 M-0 8.5 /.0.0 /.5 0.5/ 0.75 00 8. 8 6 50 5 80 M- 98.0 /.0.0 /.0.0 /.5 8. 8 6 50 5 80 M- 98 5.0 / 5.5 5.0.0.0 8. 0 8 00 65 0 M- 7.5 / 0 7.5 / 0 5.0 / 7.5.0 /.0 60 5. 50 00 50 M-6 79.5.5 / 5 / 0.5 / 5 / 0 0 /.5 / 5 5 / 7.5 / 0 80 8 5.8 50 00 50 M-6 80.0 5 / 0 5 / 0 0.5 / 5 00 55 59. 6 00 50 00 M-6 8.5 0 / 50 0 5 / 0 5 5 60 6. 8 5 50 00 50 8 M-6 60 50 / 60 0 5 / 0 50 65 69. 8 5 550 500 50 8 M-6 7 75 75 / 00 50 / 60 0 / 50 80 75 79.9 0 5 550 500 50 8 M-6 7 00 / 5 00 / 5 / 50 60 /75 50 / 60 5 80 85. 75 660 600 550 8 M-0 7 50 TO 0 50 TO 0 00 TO 70 75 TO 50 55 00 06. 8 5 800 70 680 8 M-0 7 5 TO 80 5 TO 80 5 To00 70TO50
j ØA J FOOT h Ød ØD H MOUNTING L L C ØS K E M Lmax G F N FREE STAGE OUTPUT MOUNTING Dj6 L J H dj6 L j h C E M F N G S K A L max KA-0 5 5 6.5 60 0 60 80 00 9 9 0 70 67 KA-0 9 0 6.5 5 5 6 80 60 90 0 50 7 9 0 95 9.5 KA-0 8 0 8 9 0 6.5 0 70 00 0 0 5 9 0 5 05 KA-0 5 0 5 5 8 7 5 80 08 0 5 68 0 5 KA-05 8 50 0 8 0 8 5 90 0 0 70 70.5 5 55 5.5 KT-06 50 75 5.5 8 0 8 0 0 50 80 0 9 0 0 KT-07 60 80 8 6 5 0 5 0 0 70 95 5 0 0 0 6 KT-08 70 90 0 7.5 8 50 0 55 50 00 0 60 7 8 0 56 69 KT-09 80 0 85 55 5 80 00 50 00 50 9 8 5 00.5 KT-0 95 0 5 00 60 80 8 6 00 50 00 50 00 56 5 0 56 KT- 95 0 5 00 60 80 8 6 00 50 00 50 00 56 5 0 578 KT- 0 65 8 6 65 85 8 69 5 75 0 75 0 09 0 70 67 KA-0 5 5 6.5 60 0 60 80 00 9 9 0 70 8 KA-0 9 0 6.5 5 5 6 80 60 90 0 50 7 9 0 95.5 KA-0 8 0 8 5 5 6 0 70 00 0 0 5 9 0 5.5 KA-0 5 0 5 9 0 6.5 5 80 08 0 5 68 0 60 KA-05 8 50 0 9 0 6.5 5 90 0 0 70 70.5 5 55 67 KT-06 50 75 5.5 5 8 7 0 0 50 80 0 9 0 0 0.5 KT-07 60 80 8 6 8 0 8 0 0 70 95 5 0 0 0 68 KT-08 70 90 0 7.5 8 0 8 55 50 00 0 60 7 8 0 56 9 KT-09 80 0 85 5 0 5 80 00 50 00 50 9 8 5 00 6 KT-0 95 0 5 00 8 50 0 00 50 00 50 00 56 5 0 559.5 KT- 95 0 5 00 55 5 00 50 00 50 00 56 5 0 587 KT- 0 65 8 6 60 80 8 6 5 75 0 75 0 09 0 70 7 KA-0 5 5 6.5 60 0 60 80 00 9 9 0 70 98 KA-0 9 0 6.5 5 5 6 80 60 90 0 50 7 9 0 95 6.5 KA-0 8 0 8 5 5 6 0 70 00 0 0 5 9 0 5.5 KA-0 5 0 5 5 5 6 5 80 08 0 5 68 0 77 KA-05 8 50 0 5 5 6 5 90 0 0 70 70.5 5 55 8.5 KT-06 50 75 5.5 9 0 6.5 0 0 50 80 0 9 0 0 8 KT-07 60 80 8 6 9 0 6.5 0 0 70 95 5 0 0 0 80.5 KT-08 70 90 0 7.5 5 8 7 55 50 00 0 60 7 8 0 56 7.5 KT-09 80 0 85 8 0 8 80 00 50 00 50 9 8 5 00 70 KT-0 95 0 5 00 8 0 8 00 50 00 50 00 56 5 0 58.5 KT- 95 0 5 00 5 0 5 00 50 00 50 00 56 5 0 67.5 KT- 0 65 8 6 8 50 0 5 75 0 75 0 09 0 70 78.5 KA-0 5 5 6.5 60 0 60 80 00 9 9 0 70 KA-0 9 0 6.5 5 5 6 80 60 90 0 50 7 9 0 95 58.5 KA-0 8 0 8 5 5 6 0 70 00 0 0 5 9 0 5 66.5 KA-0 5 0 5 5 5 6 5 80 08 0 5 68 0 99 KA-05 8 50 0 5 5 6 5 90 0 0 70 70.5 5 55 06.5 KT-06 50 75 5.5 5 5 6 0 0 50 80 0 9 0 0 65. KT-07 60 80 8 6 5 5 6 0 0 70 95 5 0 0 0 98 KT-08 70 90 0 7.5 9 0 6.5 55 50 00 0 60 7 8 0 56 5 KT-09 80 0 85 9 0 6.5 80 00 50 00 50 9 8 5 00 8.5 KT-0 95 0 5 00 5 8 7 00 50 00 50 00 56 5 0 608 KT- 95 0 5 00 8 0 8 00 50 00 50 00 56 5 0 6.5 KT- 0 65 8 6 8 0 8 5 75 0 75 0 09 0 70 750.5
FLANGE N HOLES ØS j J h Ød L ØA K L G ØD ØF ØM ØE H MOUNTING FREE Lmax STAGE OUTPUT MOUNTING Dj6 L J H dj6 L j h E M F h8 S N G K A L max KA-0 5 5 6.5 85 68 55 9 9 8 70 67 KA-0 9 0 6.5 5 5 6 0 0 80 9 0 0 95 9.5 KA-0 8 0 8 9 0 6.5 0 5 95 9 8 0 5 05 KA-0 5 0 5 5 8 7 50 5 00 9 8 50 0 5 KA-05 8 50 0 8 0 8 50 5 00 9 8 55 55 5.5 KT-06 50 75 5.5 8 0 8 00 65 0 8 80 5 0 KT-07 60 80 8 6 5 0 5 0 00 70 8 85 0 0 6 KT-08 70 90 0 7.5 8 50 0 50 5 80 8 95 5 56 69 KT-09 80 0 85 55 5 90 65 0 7 0 90.5 KT-0 95 0 5 00 60 80 8 6 0 05 70 8 50 0 0 56 KT- 95 0 5 00 60 80 8 6 0 05 70 8 50 0 0 578 KT- 0 65 8 6 65 85 8 69 65 5 00 8 5 70 67 KA-0 5 5 6.5 85 68 55 9 9 8 70 8 KA-0 9 0 6.5 5 5 6 0 0 80 9 0 0 95.5 KA-0 8 0 8 5 5 6 0 5 95 9 8 0 5.5 KA-0 5 0 5 9 0 6.5 50 5 00 9 8 50 0 60 KA-05 8 50 0 9 0 6.5 50 5 00 9 8 55 55 67 KT-06 50 75 5.5 5 8 7 00 65 0 8 80 5 0 0.5 KT-07 60 80 8 6 8 0 8 0 00 70 8 85 0 0 68 KT-08 70 90 0 7.5 8 0 8 50 5 80 8 95 5 56 9 KT-09 80 0 85 5 0 5 90 65 0 7 0 90 6 KT-0 95 0 5 00 8 50 0 0 05 70 8 50 0 0 559.5 KT- 95 0 5 00 55 5 0 05 70 8 50 0 0 587 KT- 0 65 8 6 60 80 8 6 65 5 00 8 5 70 7 KA-0 5 5 6.5 85 68 55 9 9 8 70 98 KA-0 9 0 6.5 5 5 6 0 0 80 9 0 0 95 6.5 KA-0 8 0 8 5 5 6 0 5 95 9 8 0 5.5 KA-0 5 0 5 5 5 6 50 5 00 9 8 50 0 77 KA-05 8 50 0 5 5 6 50 5 00 9 8 55 55 8.5 KT-06 50 75 5.5 9 0 6.5 00 65 0 8 80 5 0 8 KT-07 60 80 8 6 9 0 6.5 0 00 70 8 85 0 0 80.5 KT-08 70 90 0 7.5 5 8 7 50 5 80 8 95 5 56 7.5 KT-09 80 0 85 8 0 8 90 65 0 7 0 90 70 KT-0 95 0 5 00 8 0 8 0 05 70 8 50 0 0 58.5 KT- 95 0 5 00 5 0 5 0 05 70 8 50 0 0 67.5 KT- 0 65 8 6 8 50 0 65 5 00 8 5 70 78.5 KA-0 5 5 6.5 85 68 55 9 9 8 70 KA-0 9 0 6.5 5 5 6 0 0 80 9 0 0 95 58.5 KA-0 8 0 8 5 5 6 0 5 95 9 8 0 5 66.5 KA-0 5 0 5 5 5 6 50 5 00 9 8 50 0 99 KA-05 8 50 0 5 5 6 50 5 00 9 8 55 55 06.5 KT-06 50 75 5.5 5 5 6 00 65 0 8 80 5 0 65 KT-07 60 80 8 6 5 5 6 0 00 70 8 85 0 0 98 KT-08 70 90 0 7.5 9 0 6.5 50 5 80 8 95 5 56 5 KT-09 80 0 85 9 0 6.5 90 65 0 7 0 90 8.5 KT-0 95 0 5 00 5 8 7 0 05 70 8 50 0 0 608 KT- 95 0 5 00 8 0 8 0 05 70 8 50 0 0 6.5 KT- 0 65 8 6 8 0 8 65 5 00 8 5 70 750.5
X Lmax FOOT ØA J MOUNTING L C H ØS K ØD E M G F N STAGE OUTPUT MOUNTING MAX ADOPTABLE MOTOR FRAME Dj6 L J H C E M F N G S K A L max KA-0 5 5 6 60 0 60 80 00 9 9 0 70 60 KA-0 9 0 6.5 80 60 90 0 50 7 9 0 95 0 KA-0 8 0 8 0 70 00 0 0 5 9 0 5 08.5 KA-0 5 0 5 5 80 08 0 5 68 0 9 KA-05 8 50 0 5 90 0 0 70 70.5 5 55 KT-06 50 75 5.5 0 0 50 80 0 9 0 0 85.5 KT-07 60 80 8 6 0 0 70 95 5 0 0 0 5.5 KT-08 70 90 0 7.5 55 50 00 0 60 7 8 0 56.5 KT-09 80 0 85 80 00 50 00 50 9 8 5 00 70.5 KT-0 95 0 5 00 00 50 00 50 00 56 5 0 6.5 KT- 95 0 5 00 00 50 00 50 00 56 5 0 77.5 KT- 0 65 8 6 5 75 0 75 0 09 0 70 6 KA-0 5 5 6 60 0 60 80 00 9 9 0 70 76 KA-0 9 0 6.5 80 60 90 0 50 7 9 0 95 KA-0 8 0 8 0 70 00 0 0 5 9 0 5 KA-0 5 0 5 5 80 08 0 5 68 0 6 KA-05 8 50 0 5 90 0 0 70 70.5 5 55 7 KT-06 50 75 5.5 0 0 50 80 0 9 0 0 7.5 KT-07 60 80 8 6 0 0 70 95 5 0 0 0 56.5 KT-08 70 90 0 7.5 55 50 00 0 60 7 8 0 56 6 KT-09 80 0 85 80 00 50 00 50 9 8 5 00 7.5 KT-0 95 0 5 00 00 50 00 50 00 56 5 0 KT- 95 0 5 00 00 50 00 50 00 56 5 0 5 KT- 0 65 8 6 5 75 0 75 0 09 0 70 5.5 KA-0 5 5 6 60 0 60 80 00 9 9 0 70 9 KA-0 9 0 6.5 80 60 90 0 50 7 9 0 95 5 KA-0 8 0 8 0 70 00 0 0 5 9 0 5 5 KA-0 5 0 5 5 80 08 0 5 68 0 85 KA-05 8 50 0 5 90 0 0 70 70.5 5 55 9 KT-06 50 75 5.5 0 0 50 80 0 9 0 0 5 KT-07 60 80 8 6 0 0 70 95 5 0 0 0 8 KT-08 70 90 0 7.5 55 50 00 0 60 7 8 0 56 05 KT-09 80 0 85 80 00 50 00 50 9 8 5 00 58 KT-0 95 0 5 00 00 50 00 50 00 56 5 0 5 KT- 95 0 5 00 00 50 00 50 00 56 5 0 9 KT- 0 65 8 6 5 75 0 75 0 09 0 70 58 KA-0 5 5 6 60 0 60 80 00 9 9 0 70 06 KA-0 9 0 6.5 80 60 90 0 50 7 9 0 95 67 KA-0 8 0 8 0 70 00 0 0 5 9 0 5 75 KA-0 5 0 5 5 80 08 0 5 68 0 07 KA-05 8 50 0 5 90 0 0 70 70.5 5 55 5 KT-06 50 75 5.5 0 0 50 80 0 9 0 0 7 KT-07 60 80 8 6 0 0 70 95 5 0 0 0 06.5 KT-08 70 90 0 7.5 55 50 00 0 60 7 8 0 56 9 KT-09 80 0 85 80 00 50 00 50 9 8 5 00 86 KT-0 95 0 5 00 00 50 00 50 00 56 5 0 95 KT- 95 0 5 00 00 50 00 50 00 56 5 0 5.5 KT- 0 65 8 6 5 75 0 75 0 09 0 70 6 NOTE :- FOR DIMENTION "X" & MOTOR MOUNTING DIMENTIONS PLEASE REFER MOTOR MOUNTING CHART ON PAGE NO- AS PER SELECTION TABLE AS PER SELECTION TABLE AS PER SELECTION TABLE AS PER SELECTION TABLE
FLANGE X Lmax N HOLES Ø S A Ø D Ø F Ø M Ø E Ø J H MOUNTING K L G STAGE OUTPUT MOUNTING MAX ADOPTABLE MOTOR FRAME Dj6 L J H E M F h8 S N G K A L MAX KA-0 5 5 6 85 68 55 9 9 8 70 60 KA-0 9 0 6.5 0 0 80 9 0 0 95 0 KA-0 8 0 8 0 5 95 9 8 0 5 08.5 KA-0 5 0 5 50 5 00 9 8 50 0 9 KA-05 8 50 0 50 5 00 9 8 55 55 KT-06 50 75 5.5 00 65 0 8 80 5 0 85.5 KT-07 60 80 8 6 0 00 70 8 85 0 0 5.5 KT-08 70 90 0 7.5 50 5 80 8 95 5 56.5 KT-09 80 0 85 90 65 0 7 0 90 70.5 KT-0 95 0 5 00 0 05 70 8 50 0 0 6.5 KT- 95 0 5 00 0 05 70 8 50 0 0 77.5 KT- 0 65 8 6 65 5 00 8 5 70 6 KA-0 5 5 6 85 68 55 9 9 8 70 76 KA-0 9 0 6.5 0 0 80 9 0 0 95 KA-0 8 0 8 0 5 95 9 8 0 5 KA-0 5 0 5 50 5 00 9 8 50 0 6 KA-05 8 50 0 50 5 00 9 8 55 55 7 KT-06 50 75 5.5 00 65 0 8 80 5 0 7.5 KT-07 60 80 8 6 0 00 70 8 85 0 0 56.5 KT-08 70 90 0 7.5 50 5 80 8 95 5 56 6 KT-09 80 0 85 90 65 0 7 0 90 7.5 KT-0 95 0 5 00 0 05 70 8 50 0 0 KT- 95 0 5 00 0 05 70 8 50 0 0 5 KT- 0 65 8 6 65 5 00 8 5 70 5.5 KA-0 5 5 6 85 68 55 9 9 8 70 9 KA-0 9 0 6.5 0 0 80 9 0 0 95 5 KA-0 8 0 8 0 5 95 9 8 0 5 5 KA-0 5 0 5 50 5 00 9 8 50 0 85 KA-05 8 50 0 50 5 00 9 8 55 55 9 KT-06 50 75 5.5 00 65 0 8 80 5 0 5 KT-07 60 80 8 6 0 00 70 8 85 0 0 8 KT-08 70 90 0 7.5 50 5 80 8 95 5 56 05 KT-09 80 0 85 90 65 0 7 0 90 58 KT-0 95 0 5 00 0 05 70 8 50 0 0 5 KT- 95 0 5 00 0 05 70 8 50 0 0 9 KT- 0 65 8 6 65 5 00 8 5 70 58 AS PER SELECTION TABLE AS PER SELECTION TABLE AS PER SELECTION TABLE KA-0 5 5 6 85 68 55 9 9 8 70 06 KA-0 9 0 6.5 0 0 80 9 0 0 95 67 KA-0 8 0 8 0 5 95 9 8 0 5 75 KA-0 5 0 5 50 5 00 9 8 50 0 07 KA-05 8 50 0 50 5 00 9 8 55 55 5 KT-06 50 75 5.5 00 65 0 8 80 5 0 7 KT-07 60 80 8 6 0 00 70 8 85 0 0 06.5 KT-08 70 90 0 7.5 50 5 80 8 95 5 56 9 KT-09 80 0 85 90 65 0 7 0 90 86 KT-0 95 0 5 00 0 05 70 8 50 0 0 95 KT- 95 0 5 00 0 05 70 8 50 0 0 5.5 KT- 0 65 8 6 65 5 00 8 5 70 6 AS PER SELECTION TABLE NOTE :- FOR DIMENTION "X" & MOTOR MOUNTING DIMENTIONS PLEASE REFER MOTOR MOUNTING CHART ON PAGE NO- 5
AGITATOR X Lmax N HOLES ØS ØF ØD E M J H MOUNTING L K G M E STAGE OUTPUT MOUNTING MAX ADOPTABLE MOTOR FRAME Dj6 L J H E M F h8 S N G K A L MAX KA-0 9 0 6.5 5 0 95 9 06 95 98 KA-0 8 60 8 0 05 5 6 5 7 KA-0 65 0 5 0 0 0 85 0 08 KA-05 8 75 0 60 0 0 5 5 55 55 KT-06 50 0 5.5 0 80 70 70 7 0 0 KT-07 55 0 6 59 0 00 90 70 7.5 0 7 KT-08 60 0 8 6 60 5 5 8 78 0 56 KT-09 70 0 0 7.5 50 00 50 8 90 558 KT-0 80 60 85 70 0 80 6 509.5 0 595 KT- 80 60 85 70 0 80 6 509.5 0 60 KT- 95 70 8 00 0 60 0 6 568 70 709 KT- 00 00 8 06 55 95 60 8 59 0 05 9 KA-0 9 0 6.5 5 0 95 9 06 95 5 KA-0 8 60 8 0 05 5 6 5 96 KA-0 65 0 5 0 0 0 85 0 KA-05 8 75 0 60 0 0 5 5 55 8 KT-06 50 0 5.5 0 80 70 70 7 0 5 KT-07 55 0 6 59 0 00 90 70 7.5 0 58 KT-08 60 0 8 6 60 5 5 8 78 0 56 7 KT-09 70 0 0 7.5 50 00 50 8 90 605 KT-0 80 60 85 70 0 80 6 509.5 0 67 KT- 80 60 85 70 0 80 6 509.5 0 678 KT- 95 70 8 00 0 60 0 6 568 70 779 KT- 00 00 8 06 55 95 60 8 59 0 05 9 KA-0 9 0 6.5 5 0 95 9 06 95 KA-0 8 60 8 0 05 5 6 5 8 KA-0 65 0 5 0 0 0 85 0 56 KA-05 8 75 0 60 0 0 5 5 55 05 KT-06 50 0 5.5 0 80 70 70 7 0 69 KT-07 55 0 6 59 0 00 90 70 7.5 0 85 KT-08 60 0 8 6 60 5 5 8 78 0 56 5 KT-09 70 0 0 7.5 50 00 50 8 90 66 KT-0 80 60 85 70 0 80 6 509.5 0 686 KT- 80 60 85 70 0 80 6 509.5 0 75 KT- 95 70 8 00 0 60 0 6 568 70 80 KT- 00 00 8 06 55 95 60 8 59 0 05 99 AS PER SELECTION TABLE AS PER SELECTION TABLE AS PER SELECTION TABLE KA-0 9 0 6.5 5 0 95 9 06 95 5 KA-0 8 60 8 0 05 5 6 5 0 KA-0 65 0 5 0 0 0 85 0 78 KA-05 8 75 0 60 0 0 5 5 55 7 KT-06 50 0 5.5 0 80 70 70 7 0 9 KT-07 55 0 6 59 0 00 90 70 7.5 0 508 KT-08 60 0 8 6 60 5 5 8 78 0 56 57 KT-09 70 0 0 7.5 50 00 50 8 90 67 KT-0 80 60 85 70 0 80 6 509.5 0 78 KT- 80 60 85 70 0 80 6 509.5 0 766 KT- 95 70 8 00 0 60 0 6 568 70 869 KT- 00 00 8 06 55 95 60 8 59 0 05 09 AS PER SELECTION TABLE NOTE :- FOR DIMENTION "X" & MOTOR MOUNTING DIMENTIONS PLEASE REFER MOTOR MOUNTING CHART ON PAGE NO- 6
Foot MOUNTING FREE ( HEAVY SERIES ) j h Ød L ØS LFmax E M K G L ØD C ØA J F N H Figure - X Figure - E M LHmax K G L ØD C ØA J F N H ØS Foot MOUNTING ( HEAVY SERIES ) STAGE OUTPUT MOUNTING FOR FIGURE & FOR FIGURE FOR FIGURE Dj6 L J H C E M F N G S K A dj6 L j h LF max LH max KT- 0 75 7 50 0 70 00 60 5 6 0 05 70 90 0 7.5 75.0 575 KT- 60 0 8 69 50 0 0 75 600 69 0 5 560 0 5 8 6 9 60 KT-5 70 70 0 79 5 70 8 570 700 66 0 0 60 5 50 08 65.0 KT-6 50 50 56 6 500 500 600 675 850 97 5 50 750 5 50 68 ON REQ KT-7 60 50 6 7 550 55 555 970 070 97 5 50 980 0 80 6 8 57 KT-8 50 550 80 65 650 550 800 050 00 706 50 50 00 0 80 6 8 756 KT-9 ON REQUEST KT-0 ON REQUEST KT- 0 75 7 50 0 70 00 60 5 6 0 05 60 80 8 6 788 587 KT- 60 0 8 69 50 0 0 75 600 69 0 5 560 65 85 8 69 8 99 KT-5 70 70 0 79 5 70 8 570 700 66 0 0 60 70 90 0 7.5 7 98.0 KT-6 50 50 56 6 500 500 600 675 850 97 5 50 750 0 5 8 6 505 5.0 KT-7 60 50 6 7 550 55 555 970 070 97 5 50 980 5 50 76 ON REQ KT-8 50 550 80 65 650 550 800 050 00 706 50 50 00 5 50 9 KT-9 ON REQUEST KT-0 ON REQUEST KT- 0 75 7 50 0 70 00 60 5 6 0 05 55 5 798 655 KT- 60 0 8 69 50 0 0 75 600 69 0 5 560 60 80 8 6 05 0 KT-5 70 70 0 79 5 70 8 570 700 66 0 0 60 60 80 8 6 6 09 KT-6 50 50 56 6 500 500 600 675 850 97 5 50 750 65 85 8 69 65 KT-7 60 50 6 7 550 55 555 970 070 97 5 50 980 70 90 0 7.5 85 ON REQ KT-8 50 550 80 65 650 550 800 050 00 706 50 50 00 0 5 8 6 8 KT-9 ON REQUEST KT-0 ON REQUEST KT- 0 75 7 50 0 70 00 60 5 6 0 05 5 0 5 850 70 KT- 60 0 8 69 50 0 0 75 600 69 0 5 560 8 50 0 0 095 KT-5 70 70 0 79 5 70 8 570 700 66 0 0 60 55 5 55 65.0 KT-6 50 50 56 6 500 500 600 675 850 97 5 50 750 60 80 8 6 70 796.0 KT-7 60 50 6 7 550 55 555 970 070 97 5 50 980 60 80 8 6 9 ON REQ KT-8 50 550 80 65 650 550 800 050 00 706 50 50 00 65 85 8 69 0 KT-9 ON REQUEST KT-0 ON REQUEST NOTE :- FOR DIMENTION "X" & MOTOR MOUNTING DIMENTIONS PLEASE REFER MOTOR MOUNTING CHART ON PAGE NO- FOR MAXIMUM FRAME PLEASE REFER SELECTION CHARTS 7
FLANGE MOUNTING FREE ( HEAVY SERIES ) j h Ød L K LHmax G L ØD ØF ØM ØE N HOLES ØS J H Figure - X K LHmax G L ØD ØF ØM N HOLES ØE ØS J H Figure - FLANGE MOUNTING ( HEAVY SERIES ) STAGE OUTPUT MOUNTING FOR FIGURE & FOR FIGURE FOR FIGURE Dj6 L J H E M F h8 S N G K dj6 L j h LF max LH max. KT- 0 75 7 05 70 0 8 6 6 50 70 90 0 7.5 75 575 KT- 60 0 8 69 560 50 60 8 6 55 68 0 5 8 6 9 60 KT-5 70 70 0 79 60 580 50 0 6 557 88 5 50 08 65.0 KT-6 50 50 56 6 750 700 65 6 58 8 5 50 68 ON REQUEST KT-7 60 50 6 7 980 900 790 6 59 65 0 80 6 8 57 KT-8 50 550 80 65 00 00 90 6 89 6 0 80 6 8 756 KT-9 ON REQUEST KT-0 ON REQUEST KT- 0 75 7 05 70 0 8 6 6 50 70 90 0 7.5 788 587 KT- 60 0 8 69 560 50 60 8 6 55 68 0 5 8 6 8 99 KT-5 70 70 0 79 60 580 50 0 6 557 88 5 50 7 98.0 KT-6 50 50 56 6 750 700 65 6 58 8 5 50 505 5.0 KT-7 60 50 6 7 980 900 795 6 59 65 0 80 6 8 76 ON REQUEST KT-8 50 550 80 65 00 00 90 6 89 6 0 80 6 8 9 KT-9 ON REQUEST KT-0 ON REQUEST KT- 0 75 7 05 70 0 8 6 6 50 70 90 0 7.5 798 655 KT- 60 0 8 69 560 50 60 8 6 55 68 0 5 8 6 05 0 KT-5 70 70 0 79 60 580 50 0 6 557 88 5 50 6 09 KT-6 50 50 56 6 750 700 65 6 58 8 5 50 65 KT-7 60 50 6 7 980 900 795 6 59 65 0 80 6 8 85 ON REQUEST KT-8 50 550 80 65 00 00 90 6 89 6 0 80 6 8 8 KT-9 ON REQUEST KT-0 ON REQUEST KT- 0 75 7 05 70 0 8 6 6 50 70 90 0 7.5 850 70 KT- 60 0 8 69 560 50 60 8 6 55 68 0 5 8 6 0 095 KT-5 70 70 0 79 60 580 50 0 6 557 88 5 50 55 65.0 KT-6 50 50 56 6 750 700 65 6 58 8 5 50 70 796.0 KT-7 60 50 6 7 980 900 795 6 59 65 0 80 6 8 9 ON REQUEST KT-8 50 550 80 65 00 00 90 6 89 6 0 80 6 8 0 KT-9 ON REQUEST KT-0 ON REQUEST NOTE :- FOR DIMENTION "X" & MOTOR MOUNTING DIMENTIONS PLEASE REFER MOTOR MOUNTING CHART ON PAGE NO- FOR MAXIMUM FRAME PLEASE REFER SELECTION CHARTS 8
PLANETARY WINCHES OUR RANGE OF PRODUCT PULL :- 00KG TO 50 TONS SPEED :- 0.5MPM TO 00MPM POWER :- 0.8 KW TO 50 KW :- FREE OR HELICAL GEAR BOXES TORQUE :- 0 Nm TO 500000 Nm POWER :- 0.8KW TO 000 KW MOUNTINGS :- B-5 (FLANG) OR B- FOOT ALSO AVILABLE WITH HELICAL PLANETARY COMBINATION PLANETARY PARALLEL AXIS & UNI AXIS TWIN OUTPUT SHAFT SPEED REDUCERS SPECIALLY DESIGNED FOR STIRRER APPLICATIONS TORQUE :- 0 Nm TO 50000 Nm :- 6: TO 0: POWER :- 0.8 KW TO 50 KW MOUNTINGS :- VERTICALLY DOWNWARD WITH FREE / WORM GEAR BOXES TORQUE :- 0Nm TO 000 Nm :- 0: TO 60: POWER :- 0.8 KW TO 5 KW MOUNTINGS :- ADOPTABLE UNIVERSAL MOUNTING WITH OUTPUT ALSO AVAILABLE WITH WORM PLANETARY COMBINATION PLANETARY BELT CONVEYOR DRIVES SPECIALLY DESIGNED FOR BELT CONVEYORS TORQUE :- 0 Nm TO 5,000 Nm SPEED :- 0.0 MPM TO 500MPM POWER :- 0.8KW TO 50 KW :- FREE OR TORQUE LIMITER FOR SLOW SPEED HIGH TORQUE APPLICATION] TORQUE :- 50 Nm TO 5000Nm SPEED :- 0.RPM TO 00RPM OUTPUT :- SUITABLE FLANGE FOR MOUNTING OF SPROCKET, PULLY, GEAR, COUPLING ETC. OR WITH / MALE SHAFT CUSTOM BUILT & DIFFERENTIAL GEAR BOXES AS PER CUSTOMER S REQUIREMENT, SPECIFICATIONS & APPLICATIONS WE DESIGN THE SUITABLE GEAR BOXES FOR MORE DETAILS OF ANY ABOVE PRODUCTS, PLEASE CONTACT OUR MARKETING REPRESENTATIVE OR OUR FACTORY
KAVITSU Excellence in Gear Technology Marketing Office : SATARA : W-85, ADDL., MIDC, SATARA -, MAHARASHTRA (INDIA) Ph. : +9 6 080, 080 FAX :+9 6 0805 PUNE : KEDAR EMPIRE, BLOCK No., rd FLOOR, NEAR PAUD OVER BRIDGE, KARVE ROAD, ERANDVANE, PUNE 08 MAHARASHTRA (INDIA) PH. : +9 0 550805 FAX :+9 0 55080 E-mail: kavitsu8888@sify.com, mktg_kavitsu@yahoo.co.in Web Site : www.kavitsugear.com