MDS Manufacturing Company Inc. is a third generation, family owned, company that has been serving the community over 50 years. Our commitment to the market and our dedication to produce top quality products has made MDS a leader in the manufacturing of skid steer and telehandler attachments for most major brands of equipment in North America. MDS products are engineered and designed for quality, convenience, reliability, versatility, value and safety. Our products are enhanced by ongoing research and development, advances in manufacturing technology, and a clear commitment to consistently produce high quality products. The values of our business and employees tell why MDS Manufacturing Company is improving the versatility of material handling loaders across the country and is LEADING THE WAY WITH QUALITY. Table of Contents SPECIALTY PRODUCTS Rock Badger...3 Rock Buckets and Grapple Forks...4-5 LRB Series Rock Buckets MRB Series Rock Buckets HRB Series Rock Buckets Cobra Brush Master+...6 ROTO-KING...7 MDS Pusher+...8-9 3 or 4 Tine Square Bale Stabbers...10 SKID STEER LOADERS Round Bale Handling Equipment...11 Manual Single and Double Tine Round Bale Stabber Sur-Grip Bale Grabber Manual Double Tine/Double Bale Stabber Hydraulic Double Tine/Double Bale Stabber Rail Type Pallet Fork Systems...12-13 Cab Forward High Visibility Pallet Fork System Econo Pallet Fork System Rail Style Pallet Fork Round Bale Stabber Adapters Skid Steer Plate with Class II Receiver Hitch Skid Steer Buckets and Grapple Fork Options...14 High Volume Skid Steer Buckets and Grapple Forks Replacement Skid Steer Buckets and Grapple Forks Bolt-on 3 Tine Heavy Duty Grapple...15 Manure Buckets and Grapple Forks...16 TELEHANDLERS Loader Buckets...17 8' and 8.5' Replacement Buckets Special Size Buckets Available Adapt-a-Tach...18 MDS Warranty MDS Manufacturing Co. Inc. warrants to the original purchaser only that the goods manufactured by MDS are free from defects in material and workmanship under normal use and service when properly installed one (1) year from the date of purchase. Any defective part or component must be returned to the factory at the purchaser s expense for inspection by MDS. The obligation of MDS is limited to repairing or replacing at the factory any part or component determined to its satisfaction to be defective. MDS SHALL NOT BE LIABLE FOR ANY INCIDEN- TAL OR CONSEQUENTIAL DAMAGES. All transportation charges shall be paid by the purchaser. Purchaser must notify MDS of a claim by registered or certified mail within thirty (30) days of discovery or the claim shall be deemed waived. All returns myst have an RMA# before MDS will accept the return. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY OR FITNESS FOR A PARTICULAR PUR- POSE. NO warranty is give by MDS for parts, components or trade accessories furnished by MDS but not manufactured by it. They are covered by the warranty of their manufacturer if any. No person, firm or corporation including the selling dealer is authorized to assume for MDS any other liability in connection with the sale of these goods. Call MDS for a dealer near you at 1-844-522-9999 www.mdsmfg.com Design materials and/or specifications are subject to change without notice and without liability therefore.
See the Rock Badger in use by clicking on the YouTube link at www.mdsmfg.com 1" AR-400 (Abrasion Resistant) Material Tines Hook at top of Tine used to Transport Rocks to Pile 8" Space Between Tines High Tensile Strength Steel Frame Universal Skid Steer Hookup Tine Repair Kits Available Benefits: Low Cost Rock / Root Extraction Quick Ground Piercing Tines Easily Maneuverable to Pry Around Rocks Side Skid to Backfill Holes Wide Range of Applications: Industrial Commercial Agricultural Construction 3ROCK BADGER 3
Rock Buckets and Grapple Forks 4ROCK BUCKETS AND GRAPPLE FORKS 4 The Silver Bullet Rock Bucket from MDS an incredibly versatile attachment. It does so much more than the name implies. One attachment that is able to handle rocks, concrete debris, tree stumps, branches, hay bales and other bulky material with ease. Whatever your material handling need is, the Silver Bullet Series Rock Bucket from MDS is engineered for strength and durability. Super tough, high carbon solid steel tines and heavy duty support plates are designed for years of trouble-free service. The Silver Bullet Series Rock Bucket has an optional grapple fork attachment available for most applications. The rugged grapple fork incorporates a quick attach, user-friendly mounting design. The grapple fork also features 5/8" thick high carbon steel teeth, high strength kneed joint, heavy duty 1-1/4" plated pivot pins and twin 2-1/2" cylinders for powerful grapple strength. Hydraulic hoses plumbed to center for convenience (connection hoses and ends not included). 14 Reasons to Buy MDS Rock Buckets Optional Serrated Side Plate
Rock Buckets and Grapple Forks Outstanding grapple fork clamping action retains irregular shaped materials Grapple fork assists in holding a high volume of silage, chopped hay, manure, debris, etc. in bucket Fast-Effective-Strong The Silver Bullet Series Rock Buckets will save you hours of time and effort by effectively handling various materials. Super tough, high carbon abrasion resistant solid steel tines. Integrated rock dam helps contain material when picked up. Integrated rock well contains collected rocks while gathering additional rocks. Various tine spacing allows soil to sift through while retaining debris. 66" Grapple Opening Versatile-Adaptable Available in various sizes and widths (see chart), the Silver Bullet Series Rock Bucket from MDS can be purchased separately or with convenient bolt-on mounts. MDS Rock Buckets are ideal for use in the agricultural, landscape and construction industries. If you have any questions or require a special application call MDS at 1-800-658-4703 or visit www.mdsmfg.com. TINE TINE TINE # OF MODEL WIDTH* DIAMETER SPACING TINES LENGTH HEIGHT WEIGHT LRB418 4' 1 1 /8" 1 3 /4" 17 39" 26" 570 lbs. LRB518 5' 1 1 /8" 1 3 /4" 21 39" 26" 680 lbs. LRB618 6' 1 1 /8" 1 3 /4" 25 39" 26" 795 lbs. LRB718 7' 1 1 /8" 1 3 /4" 30 39" 26" 940 lbs. MRB514 5' 1 1 /4" 2 1 /2" 16 42" 26" 675 lbs. MRB614 6' 1 1 /4" 2 1 /2" 20 42" 26" 790 lbs. MRB714 7' 1 1 /4" 2 1 /2" 23 42" 26" 900 lbs. MRB814 8' 1 1 /4" 2 1 /2" 25 42" 26" 1015 lbs. ROCK BUCKETS AND GRAPPLE FORKS HRB512 5' 1 1 /2" 3" 14 42" 26" 735 lbs. HRB612 6' 1 1 /2" 3" 17 42" 26" 830 lbs. HRB712 7' 1 1 /2" 3" 19 42" 26" 970 lbs. HRB812 8' 1 1 /2" 3" 22 42" 26" 1155 lbs. HRB912 9' 1 1 /2" 3" 24 42" 26" 1250 lbs. Rock Bucket shown with Grapple Fork Attachment *Due to tine spacing, widths are approximate.. 5
NEW! 6COBRA BRUSH MASTER+ MDS Manufacturing Co. Inc., is creating tools to help you unleash your loaders potential! NEW for 2014 is the COBRA BRUSH MASTER+ Vertical Slat Bucket. MDS has reinvented the way you handle trash, rocks, silage, loose hay, rubble, brush, branches, roots, and debris from bricks, stone, concrete and more. Available in 66, 72, 78, 84, 90, and 96 widths there s bound to be one that fits your needs. See chart below for more information. As with all other MDS attachments, the COBRA BRUSH MASTER+ Vertical Slat Bucket is available for the skid steer, tractor loader, telehandler industry. Over 85 bolt-on mounting brackets available to fit every loader built since 1960 is what sets MDS apart from other attachment suppliers. The grapple works on all buckets and has a 57 opening. The grapple fork arms are designed to work independently for uneven loads, or with the addition of an optional grapple coupling, can tie the arms together and function as one with two 2 x 8 cylinders. The bucket is constructed from Grade 50 high strength alloy steel. The grapple fork assembly teeth are constructed from T1 steel for increased durability and resistance to wear. It is the same yellow grapple fork tooth found on most other MDS grapple assemblies. MODEL SPACING WIDTH CBM3-66 3" 66" CBM3-72 3" 72" CBM3-78 3" 78" CBM3-84 3" 84" CBM3-90 3" 90" CBM3-96 3" 96" MODEL SPACING WIDTH CBM6-66 6" 66" CBM6-72 6" 72" CBM6-78 6" 78" CBM6-84 6" 84" CBM6-90 6" 90" CBM6-96 6" 96" CURRENTLY 12 MODELS TO CHOOSE FROM! *Grapple sold separately. Please mention item number CBMG-4 when ordering. Bolt it on when you need..take it off when you don t.
See the ROTO-KING in use by clicking on the YouTube link at www.mdsmfg.com Available for: Skid Steers (minimum 2700 lb. lift capacity) Tractor Loaders Telehandlers Wheel Loaders Hydraulic Drive Reversible Rotor Direction Large 6'x6' Ripper Bed Handles Any Size Round Bale Overflow Screen Protection Rugged 7 Ga. Side Panels Heavy Duty 1-3/8" Bearings (4) HD Rotors With Serrated Teeth (4) 1-1/4" Bale Loading Tines Standard Bolt-On Mounts Available For Skid Steer, Tractor Loaders, Telehandlers and Wheel Loaders Benefits: Highly Maneuverable Better Bedding Labor and Time Saving Quicker and Easier To Use Than Pull Type Processors Reduces Feed Cost More Palatable Feed 2 Models Available: RK350 (4'-5' bale diameter) RK500 (5'-6' bale diameter) Bed Your Livestock, Windrow Feed Your Hay ROTO-KING NOTE: Requires 12 GPM minimum and a minimum of 1500 PSI. Skid Steer minimum 2700 lb. lift capacity. Not recommended for long grasses. 7
83-POINT 8MDS PUSHER+ PRODUCTS Adjustable Skid Shoes Reinforced Side Panels
Over 85 Bolt-on Mounting Kits Available High Strength Steel Mold Board Construction Full Length, Adjustable Depth Skids Made of AR 400 (Abrasion Resistant) Material Snow Pushers Available for: Skid Steers (28" Tall x 38" Deep) MODEL # WIDTH WT CAPACITY (lbs) (cu. yards) Choice of: - Steel Curved Double Bevel Bolt-on Cutting Edge (1/2" x 8") or - Rubber Cutting Edge (1" or 1 1/2"x10") for Uneven Concrete Surfaces Options: - 17" Screen for Added Capacity and Increased Visibility - Binder Kit for Bucket Edge Mounts - (2) 3/8" GR70 Chain and (2) Lever Type Load Binders with Grab Hooks SP-SSW-06 6' 850 4 SP-SSW-08 8' 915 5 SP-SSW-10 10' 975 6 Telehandler (36" Tall x 48" Deep) MODEL # WIDTH WT CAPACITY (lbs) (cu. yards) SP-TLT-10 10' 1370 8 SP-TLT-12 12' 1545 10 SP-TLT-14 14' 1725 12 3-POINT PUSHER+ PRODUCTS 9MDS *Also Great for Pushing Silage, Light Dirt Moving Jobs, and Leveling Ground and Sand! 9
3 or 4 Tine Square Bale Stabbers SQUARE BALE STABBERS MDS MFG Co. is the industry leader in square bale handling attachments. Numerous features are incorporated to maximize your loader s capacity to safely handle any size square bale. MDS produces both a standard manual unit and hydraulic push-off models to suit your operation. 4 Tine Standard Capacity 2 - Bale (54" Tall x 84" Wide) 24" Bulkhead Extension: Required for 3 Bale Capacity Lift Capacity 6000 lbs. Hydraulic Models - Provide 16" Push-Off 4 Tines / Eliminates Bale Slicing Vertical Mast Rails - Limit Side Movement on Bales Anti-Rollover Spears Bolt-on Mounts - Built to OEM Specifications 3 Tine Single Bale Capacity (24" Tall x 60" Wide) Forged Steel Tapered Tines High Tensile Tubular Steel Frame Tines Available in 39" and 48" Lengths Excellent See-Thru Visibility Non-Grapple Fork Design Maximizes Hay Shed Storage Manual: BALE BALE PART NO. SIZE CAP. M3C133 3 X 3 1 M3C243 4 X 4 1 MC133 3 X 3 2 MC133E 3 X 3 3 MC233E 3 X 3 3 MC243 4 X 4 1 3 X 4 2 MC243E 4 X 4 2 3 x 4 3 Hydraulic: BALE BALE PART NO. SIZE CAP. HC133 3 X 3 2 HC133E 3 X 3 3 HC233E 3 X 3 3 HC243 4 X 4 1 3 X 4 2 HC243E 4 X 4 2 3 x 4 3 Four (4) tine bale stabber with hydraulic push-off MDS uses only quality brand tines. 10
Round Bale Handling Equipment Single and Double Bale Stabbers and Grabbers Forged Steel Tine Fully Tapered Tines for Easier Penetration and Removal Loader Mounts Built to OEM Specification Tapered Socket Provides Support for Tines Heavy Duty 1/4" Plate Fits All 1995 and Newer Skid Steer Models 6000 lbs. Capacity 30" MDS uses only quality 40" Sur-Grip 30" Universal frame requires bolt-on mounts Handles 4' to 6' Diameter Bales - Short Arms 4'-5', Long Arms 5'-6' Specially Formed Grabber Arms Eliminate Punctures to Plastic Wrap Opens a Full 78" for Large Square or Round Bales brand tines. 2500 lbs. Capacity 4400 lbs. Capacity 2200 lbs. Capacity Hydraulic Double Tine / Double Bale Stabber 6,000 lbs. Capacity Universal Frame Requires Bolt-on Mounts Carry 2 Big Round Bales - Expands 12" to Separate Bales Dual Slider Shafts Tapered Socket Provides Maximum Support for the Spear Forged Tapered Tines Promotes Easier Penetration and Withdrawal of the Bale Welded Hydraulic Cylinder (2.5" x 12" x 3,000 PSI) ROUND BALE HANDLING EQUIPMENT C-C BALE SPACING: CYLINDER EXTENDED 81.25" CYLINDER RETRACTED 69.25" 39.000 C-C RETRACTED 30.250 11
MDS uses American Made forks on all pallet fork systems! Cab Forward High Visibility Pallet Fork System Redesigned to accommodate new Cab Forward Designed Skid Steers (Pallet Fork Bulkhead Shortened 4.5" and Moved Forward 3.25") RAIL STYLE PALLET FORK SYSTEMS 1-1/4" x 4" Class II ITA Alloy Steel Tines Available in 42", 46", and 48" Lengths 1-1/2" x 4" Class II ITA Alloy Steel Tines Available in 42", 46", and 48" Lengths 4,000 lbs (1-1/4") or 5,200 lbs. (1-1/2") Capacity Heavy Duty Load Retaining Ring Standard Available in Full Width or Walk Through Roll Guard Frame Heavy Duty 3/8" Plate Fits All 1995 and Newer Skid Steer Models Econo Pallet Fork System 1-3/8" x 4" Class II ITA Alloy Steel Fully Tapered Tines Available in 42" and 46" Lengths 2800 Load Capacity, 60 HP Maximum Heavy Duty 7 Gauge Plate Fits all 1995 and Newer Skid Steer Models Rail Style Pallet Fork Round Bale Stabber Adapters 1-3/4" x 48" Forged Stabber Tines Fits on any Class II ITA Rail Pallet Fork 2500 lbs. Single Tine Capacity 4400 lbs. Double Tine Capacity Standard Class II ITA Locking Device Walk Through Roll Guard Frame Single Tine Full Width Roll Guard Frame Double Tine 12 844-522-999 www.mdsmfg.com sales@mdsmfg.com
MDS uses American Made forks on all pallet fork systems! Heavy Duty Shaft Style and Heavy Duty Rail Style Pallet Fork Systems JCB 530, 536, 541 with Q-Fit Hook Up 1 1/2" x 48" Shaft Style with Roll Guard (1 5/8" Shaft) 5500 lb. Capacity 1 1/2" x 48" Rail Style with Class II ITA Tines. 5200 lb. Capacity JCB 416 and 426 with Volvo L-Series Mounts DESCRIPTION Skid Steer Plate with Class II Receiver Hitch Skid Steer Class II Receiver Allows operator to quickly move equipment LIFT CAPACITY Shaft Style w/ 2" x 6" x 48" Tines & 2.25" shaft 10,000 Shaft Style w/ 2" x 6" x 60" Tines & 2.25" shaft 10,000 Shaft Style w/ 2" x 6" x 72" Tines & 2.25" shaft 10,000 Rail Style w/ Class III ITA Tines 2" x 6" 48" 10,000 Rail Style w/ Class III ITA Tines 2" x 6" 60" 10,000 Rail Style w/ Class III ITA Tines 2" x 6" 72" 10,000 Heavy Duty Pallet Fork Systems available for John Deere, Cat IT, Cat Fusion, Volvo, Komatsu, JRB500, JRB600, Bobcat, Gehl and more! Allows operator to direct and guide equipment into tighter quarters Heavy Duty 1/4" Plate Fits All 1995 and Newer Skid Steer Models HEAVY DUTY PALLET FORK SYSTEMS 13
High Volume Buckets and Grapple Forks SKID STEER LOADERS - BUCKETS AND GRAPPLE FORKS Skid Steer Replacement Buckets Standard Bucket High Volume Bucket Bucket Widths: 78", 84", 90", 96" Grade 50 High Tensile Steel Bucket Shell Upper and Lower Torque Tubes Reinforced Bucket Side Edges 5-1/2"x 5" Wear Runner Plates Extends Bucket Bottom Life 5/8"x6" Bolt-on Reversible Cutting Edge - Optional Heavy Duty Reinforced Quik-Tach Bracket Convenient Access Steps (on non-grapple buckets) High Volume Grapple 4 Tine Standard - Additional Tines Optional 5/8 High Strength Steel Grapple Tines with Lateral Supports Dual 2 1/2" 4000 PSI Welded Cylinders 61" Grapple Opening Bucket Widths: 54", 60", 66", 72", 78", 84", 90", 96" Grade 50 High Tensile Steel Bucket Shell 5-1/2"x 5" Wear Runner Plates Extends Bucket Bottom Life 5/8"x6" Bolt-on Reversible Cutting Edge - Optional Grapple Forks for Skid Steer Replacement Buckets Fixed Grapple 4 Tines - Standard 2" 4000 PSI Welded Cylinder Scrap Grapple Dual Independent Grapples Serrated Front Teeth on Independent Grapples Dual 2" 4000 PSI Welded Cylinder 14
Universal Bolt-On Heavy Duty Grapple (UBOG) Fits Buckets 60"- 84" Wide Designed to Bolt on to Your Existing Bucket Universal Fit Heavy Duty Clamping Brackets Includes 6' Hoses and Flat Face Couplers Welded Cylinder 2" x 8" x 4000 PSI Grade 50 High Strength Steel Serrated Front Support Plate for Handling Brush and Debris Bolts on to Existing Bucket Hose Clamps Dual Grease Zerks SKID STEER - UNIVERSAL BOLT-ON 3-TINE HEAVY DUTY GRAPPLE 15
Manure Bucket 1-1/4" Tine Diameter With Grapple Option SKID STEER LOADERS - MANURE BUCKETS Features of Buckets: High Strength Steel Bucket Shell 60", 66", 72", 78" Bucket Widths 24 1/2" Useable Tine Length 1-1/4" Tine Diameter 6" On-center Tine Spacing Box Tube Tine Receiver 75 HP Maximum Grapple Brackets Standard Heavy Duty 1/4" Plate Fits All 1995 and Newer Skid Steer Models Features of Grapple Forks: 4 Tine Fixed Grapple Tines Cylinder is 2" Diameter x 8" Stroke - 4000 PSI -- O-Ring Ports 49" Grapple Opening Heavy Duty Manure Bucket 1-5/8" Tine Diameter With Grapple Option Features of Buckets: High Strength Steel Bucket Shell 72", 78", 84", 90", 96" Bucket Widths 30" Useable Tine Length 1-5/8" Tine Diameter 6" On-center Tine Spacing Box Tube Tine Receiver 80 HP Minimum Grapple Brackets Standard Heavy Duty 3/8" Plate Fits All 1995 and Newer Skid Steer Models Features of Grapple Forks: 4 Tine Grapple Standard, Additional Tines Optional Dual Cylinders 2-1/2" Diameter x 8" Stroke - 4000 PSI -- O-Ring Ports 48" Grapple Opening Hose Kit to Center Mount 16
8' - 1.5 Yard 2 Yard 2.5 Yard Replacement Buckets 8.5' - 1.65 Yard 2.2 Yard Replacement Buckets Features of Buckets: 8', 8.5', 9' and 10' Bucket Widths Available 1.5-2.5 Cu. Yd. Struck Capacity Available 3/16" Grade 50 High Strength Steel 1/4" Thick Steel Bucket Side Plate 5/8"x 6" or 3/4"x 8" Tempered Steel Weld-on Cutting Edge 5/8"x6" or 3/4"x 8" Tempered Steel Bolt-on Reversible Cutting Edge - Optional Reinforced Bucket Side Edges Upper and Lower Torque Tubes to Prevent Twisting 5-1/2"x 5" or 3/4" x 5" Wear Runner Plates Extends Bucket Bottom Life 5-Tine Grapple Fork CALL FOR SPECIAL BUCKET SIZES Quick Release Grapple Fork Mounts Features of 4 or 5 Tine Grapple Fork: 3/4 High Strength Steel Grapple Tines with Lateral 8' - 1.5 Cubic Yard Bucket 8.5' - 1.65 Cubic Yard Bucket BUCKET WEIGHT: 1,250 lbs. 4-TINE GRAPPLE WEIGHT: 850 lbs. 5-TINE GRAPPLE WEIGHT: 890 lbs. GRAPPLE OPENING: 6' CYLINDER SIZE: 3" 8' - 2 Cubic Yard Bucket 8.5' - 2.2 Cubic Yard Bucket BUCKET WEIGHT: 1,510 lbs. 4-TINE GRAPPLE WEIGHT: 900 lbs. 5-TINE GRAPPLE WEIGHT: 940 lbs. GRAPPLE OPENING: 7' CYLINDER SIZE: 3" 31.5 8' - 2.5 Cubic Yard Bucket 39 Shown with Q-Fit Style Bucket 36.5 46 TELEHANDLERS - LOADER BUCKETS Supports for 1.5-2.2 Yard Bucket Dual 4000 PSI Rated Cylinders with O-Ring Ports BUCKET WEIGHT: 1,900 lbs. Large 6' or 7' Grapple Opening Quick Release Grapple Fork Mounts Spill Guard -- Standard Hose Kit to Center Mount -- Standard 4-TINE GRAPPLE WEIGHT: 960 lbs. 5-TINE GRAPPLE WEIGHT: 997 lbs. GRAPPLE OPENING: 8' 45.5 CYLINDER SIZE: 3" 51.75 17
ADAPT-A-TACH Attachment Conversion Kits Convert your Telehandler with Q-Fit and other mounts to allow pick up of skid steer attachments! *These are attachment carriers only. Not to be used for backdragging. UNI-TACH Allows your loader to pick-up skid steer attachments. Over 85 different weld-on mount kits available. 18
Creating tools to help you unleash your loaders potential Call Kevin Neumeister or Terry Burbach today. The Attachment Specialists are available to help you locate a dealer, locate a Field Sales Rep, recommend attachments for your specific loader, quote freight costs to your location and make sure you have the right mounting brackets necessary to UNLEASH YOUR LOADERS POTENTIAL. 19
Just south of SD Hwy 37 and 44 Parkston, South Dakota sales@mdsmfg.com 844-522-9999 www.mdsmfg.com