50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications
The 50F Series //5-Way Flanged Ball Valve The 50F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way valves in a process system. A standard ISO 5 pattern mounting pad allows for easy assembly of pneumatic and electric actuators. ISO 5 Mounting Pad Flanged End Construction Multi-Position ever Handle Positioning Pin High-Cycle, ive-oaded Stem Packing Multiple Configurations Full Port Construction Standard Features and Benefits Balanced -Seat Construction Unlike two seated diverter valves, the 50F series has four seats (five seats in bottom entry valves) for positive shut-off in the closed position. This true multiport function can reduce the number of valves required in a process system and gives engineers greater design flexibility Trunnion Mounted Ball ( / - ) Stem/ball isolation prevents side loading and wear of downstream seats, improving performance and service life ISO 5 Mounting Pad Standard mounting pad dimensions make it easy to assemble electric or pneumatic actuators High-Cycle, ive-oaded Stem Packing Dynamic loading on stem packing ensures a tight seal through varying pressure and temperature conditions, extending service life and reducing maintenance costs Blow-Out-Proof Stem Stem is bottom loaded to prevent removal when valve is in service Full Port Design Full port construction improves flow characteristics for greater process efficiencies Multi-Position ever Handle The lever handle can be positioned in two (/ - ) or four ( - ) different orientations for greater piping flexibility 0 or 0 Actuation Stop plates are available for both 0 and 0 actuation Options - or 5-way construction with multiple flow patterns Available in standard port construction for applications where flow rates are not critical and greater economy is desired 50F Pressure / Temperature Chart Pressure (PSI) 00 000 00 600 00 00 0-0 ANSI 50 (/ - ) Operating Conditions Temperature range (CF Seats): -0 F ~ 0 F Maximum pressure: ANSI 50: 75 PSI WOG (/ - ) ANSI 00: 70 PSI WOG (/ - ) Specifications All valves shell and seat tested to ANSI/ASME B6. and API 5 All materials comply with applicable ASTM material specifications End connections: Flanged ends to ANSI B6.5 (RTFE Seats) ANSI 00 (/ - ) 0 00 00 00 00 50 Temperature ( F)
/" ~ " T OD OG W 6 7 OP (B.C.) A - A View, Port # Part Name Body Valve Components Material Qty. A5 Gr. CFM Flange End Cap A5 Gr. CFM 7 6 M 5 Blind End Cap Ball Stem A5 Gr. CFM 6SS 6SS 0 6 Seat RTFE (5% C.F.) 5 F E H 7 0 Body Seal Thrust Washer Stem Packing Set Packing Gland PEEK 5 Belleville Washer 0SS 0 Gland Nut Gland Nut ock Washer Stop Plate A A' 5 6 Positioning Pin Handle 7 Handle Nut Handle Cover Body Bolt 0* Stem Set Pin Vinyl 6SS 6 *Part numbers 0 to are for / - only. * Trunnion Bearing * Trunnion Bolt * Trunnion * Trunnion Seal 6SS Size D ANSI50 ANSI00 / 0.5 5. 6. / 0.7 6.57 7.05 0. 7. 7.7 /.5 7..5 /.50.66..00.6 0.0 Dimensions (Inches) M H G T E F P W 5.7 6.50 7.6..0.07.60.0 5.0 6.0 0. 0.7 0.55 0.7 0.7 0.6 0. 0. 0. 0.7 0..0 0.60.7.06 0.5.7.76.7 0.7.0 0.7.0 0.5.0 M6 M6 M M0 M0 ISO 5 Pattern F05 F05 F07 F0 F0 Weight (lbs) ANSI50 ANSI00.0 0.0 0.0.0 5.0.0..0 0.7 0..7 0.7.76 M F07.0.0.0 5.0 50.0 5.0
" ~ " 0 5 A 6 OD A Detail A 6A Valve Components # Part Name Material Qty. Body A5 Gr. CFM S Flange End Cap (Small) A5 Gr. CFM A Blind End Cap (arge) A5 Gr. CFM Ball 6SS Stem 6SS 5 Seat RTFE (5% C.F.) 6 Body Seal (Small) 6A Body Seal (arge) 7 Thrust Washer PEEK OP (B.C.) W Stem Packing Set Packing Gland 6 M 5 7 0 0 Belleville Washer 0SS Gland Nut Gland Nut ock Washer Stop Plate Positioning Pin F 5 Handle Drive Coupling E H 6 7 Pipe Handle Handle Bolt Stem Bearing PEEK - Carbon Filled Body Bolt 0 0 Seat Retainer 6SS 7 Seat Retainer O-Ring Viton 0 Stem Set Pin 6SS Trunnion Bearing Trunnion Seal 5 6 5 Trunnion 6SS 6 Trunnion Bolt Dimensions (Inches) Size ANSI50 ANSI00.00 5.00.50 5.75 M.00.00 H 7.50.0 D..7 S 0.7 0.7 E.. F.07.0 P.0.0 W M0 M0 ISO 5 Pattern F0 F0 Weight (lbs) ANSI50 ANSI00 7.0 6.0.0 5.0 6 * 7.7 -.50.5 5.0.6.6.7.0 M F.0 - * 6" CAD drawing available upon request or at www.ballvalve.com
Pattern Options Way - Side, T-Port 0 0 A & B 0 0 B & C 0 0 C & D 0 0 D & A 0 A & B & C 0 B & C & D 0 C & D & A 0 D & A & B 00 60 All typically enters from either side of the run Way - Side, -Port 0 0 A & B Position D Position C typically enters from the branch Way - Bottom, 0 Angle Port 0 0 A & B 0 0 B & C 0 A & B & C Way - Bottom, 0 Angle Port 0 0 A & B Position C typically enters from bottom of the valve typically enters from bottom of the valve Way - Bottom, T-Port 0 0 A & B 0 0 B & C 0 A & B & C 00 60 All Way - Side, Double Port 0 0 A & B 00 60 All Position C typically enters from bottom of the valve typically enters from both sides of the run Way - Bottom, -Port 0 0 A & B 5 Way - Bottom, Angle Port 0 0 A & B 00 60 All typically enters from bottom of the valve typically enters from bottom of the valve
Direct Mount Products Automation Systems 50F Ordering Information Example: Multi-Port Ball Valve with ISO 5 Pattern Mounting Pad, ever Handle and Positioning Pin, Full Port, 6SS Body and Trim, RTFE (5% C.F.) Seats, Seals, ANSI 50# Flanged End Connections, -Way Side, -Port, Pattern 0* 50F 0 6 C T A S 0 Valve Series Valve Size Body and Trim Material Seat Seal End Connect. Port Config. Ball Config. Pattern* 50F - Full Port 0 06 0 0 0 0 60 / / / / 6 6 - A5 Gr. CFM C - RTFE Body (6) A5 Gr. CFM Trim (6) (5% C.F.) R - RTFE (5% G.F.) P - PEEK ( and Carbon Filled PEEK) T - M - TFM T - A - ANSI 50# Flanged B - ANSI 00# Flanged - Way - Way 5-5 Way S - Side B - Bottom - - Port T - T - Port D - Double - Port - 0 Angle Port - Adjust in Field 00 0 0 0 0 Due to continuous product development, information may change without notice. * See Pattern Options. Distributed by: ININE INDUSTRIES, INC. 70-A ittlejohn Street Baldwin Park, CA 706 Tel: (66) -6 Fax: (66) -66 www.ballvalve.com info@ballvalve.com 00 Inline Industries. All rights reserved. 006.