TR SERIES LŌDRIL LAD SERIES AERA. Foundation Drilling Equipment Manufacturing

1 TR SERIES LŌDRIL LAD SERIES AERA Foundation Drilling Equipment Manufacturing

2

3 TABLE OF CONTENTS ABOUT THE COMPANY... 4 TR SERIES... 6 LŌDRIL... 12 LAD SERIES... 18 AERA... 22

4 99% OF OUR CUSTOM- BUILT FOUNDATION DRILLS ARE STILL IN USE

5 IT ALL STARTS WITH THE FOUNDATION At Bay Shore Systems, we give customers around the world the extra advantage for extreme and conventional foundation drilling. Since 1978, we ve custom built tough, reliable equipment for specialty drilling contractors, utilities and transmission line companies, and general contractors and 99 percent of our drills are still in use today. Our commitment If you ask us, there s no average job in construction and excavation. Each one is a new challenge, so it s not enough to design and manufacture one-size-fits-all products. That s why we build to your job. Your situation. Your timeframe. 95% OF ALL SERVICE ISSUES ARE RESOLVED WITHIN 24 HOURS 24/7 Service If there s a problem, our industry-leading service team will help you fix it, 24 hours a day. We re proud of the fact that 95 percent of all service issues are resolved within 24 hours. Plus, your Product Support Sales Representative is dedicated to making your equipment run as profitably for you as possible by helping you make the right maintenance and service decisions. Sigalarm authorized distributor To help you get the most out of your rig, we re proud to be an authorized distributor for Sigalarm TM. It s a solid state electronic safety system for detecting proximity to energized high-voltage overhead power lines, with both audible and visual warning signals that alert the operator and ground personnel.

6 TR SERIES

7 THE TR SERIES DRILL RIGS BRING POWER, DEPTH AND MORE FLEXIBILITY TO YOUR FLEET Engineered for high performance, reliability and productivity, the powerful TR Series drills to depths of 100 feet (30 meters) and can be mounted to a truck, track or excavator depending on the needs of your fleet. It features comfortable, easy operation and a fully integrated kelly winch. And it s 100 percent hydraulic with no torque converter and no transmission bringing you consistent operation from hole to hole. Some TR models come with separate side tilt and mast tilt functions to help set your rig quickly and precisely, while others have auto-level function to improve production. Look to TR for: + + Rock drilling + + Battered or raked holes + + Typical foundation drilling + + Power line and utility foundations Truck mounted: Reduces environmental impact and costs by using truck s engine. Leads to better visibility and reduced noise. Ease of movement from site to site with a truck base. HYDRAULIC TORQUE UP TO AN UNSTOPPABLE 200,000 FT-LBS (270 KN-M) PLUS DRILLING DEPTHS OF UP TO 100 FEET (30 METERS) Track mounted: Highly efficient, with no outriggers to pull up and reset on every hole. Compact size for one load transport. Excavator mounted: Full range and pivot of an excavator plus extra reach to get over a hole with a boom. TRUCK MOUNTED TRACK MOUNTED BOOM MOUNTED ALL TERRAIN TRACK MOUNTED

8 FIND THE TR SERIES RIG THAT S RIGHT FOR YOU TR SERIES SPECS Units TR20 TR40 TR80 TR110 TR150 TR200 Rotary torque (max) Kelly line winch pull (first layer, max) Hole diameter 1 ft-lbs kn-m lbs kn in mm 21,500* 30 12,000 53 48 1,200 43,000 60 25,000* 110* 84 2,100 80,000 110 30,000* 130* 132 2,700 110,000 150 30,000 130 144 3,300 150,000 200 40,000 180 168 4,200 200,000 270 50,000* 220* 168 4,200 Drill speed range (LHS) RPM 40/80/140* 40/80/140* 30/60/100 10/45/100 10/30/100 10/30/100 Hole depth (max) 2 Truck GVRW x 1000 Truck GVW x 1000 Excavator weight class x 1000 3 Truck mount PTO power (max) HPU engine power (max) ft m lbs kg lbs kg lbs kg HP kw HP kw 60 18 50 23 45 20 35-50 15-22 200 150 180* 135* 80 24 60 27 50 23 40-65 18-29 200 150 250* 158* 80 24 79 35 66 30 65-95 29-45 245 180 250 158 100 30 110 50 92 42 75-100 35-45 275 205 300 220 80 24 80 24 100 45 100-45 45-65 350 260 400 300 TR Series upgrades + + Square kelly bar upgrades, with a choice of three grades of material + + Kelly winch upgrade to a larger winch for maximum hoisting + + Add a service winch to make tool changes quick and convenient + + Round, self-locking kellys to increase crowd force in hard drilling conditions + + Reaction jack in combination with round, self-locking kellys to handle tough rock + + Power line detector that sounds when you re close to live overhead lines + + Boom modification to maximize the size of the TR you can put on a smaller excavator + + Telescoping boom to work out further beyond the tracks or increase crowd force and flexibility + + Quick disconnect to easily remove the TR from the excavator Need more options? We ll custom engineer the right rig for you. *With upgrade 1 Dependent on ground conditions, tooling and operation 2 Dependent on configuration 3 Excavator modifications may be required or anticipated

9 OUR NEW TR RIG IS THE PERFECT COMBINATION OF POWER AND VERSATILITY. TRANSPORT AND SETUP IS EFFICIENT AND ECONOMICAL. PAIRED WITH BAY SHORE S IMMEDIATE AND ALWAYS AVAILABLE TECHNICAL SUPPORT, IT S TOUGH TO BEAT. Andy Shorten, Greg Bair Track Hoe Service

10

11

12 LŌDRIL

13 THE LŌDRIL GETS YOU THE JOBS YOUR COMPETITORS CAN T GET The LōDril is a versatile, powerful excavator-mounted foundation drill for traditional and extreme jobs. Its telescoping kelly bars allow you to drill to depths of 90 feet (27 meters) under severe overhead restrictions with a very low profile attachment even in the most unfriendly conditions. We ll build your LōDril to the specific requirements of your job but it ll take you far beyond that. We ve built more than 600 LōDrils, and 99 percent of them are still in use today, including the first one! Whether you purchase a new excavator or mount it on an existing one in your fleet, your LōDril will be engineered for the base machine that makes the most sense for you. Look to LōDril for extreme projects like: + + Inside buildings + + Large diameter holes + + On slopes + + On uneven or rough terrain + + Over casing + + Over obstacles + + Under bridges + + Under power lines HYDRAULIC TORQUE UP TO 65,000 FT- LBS (95 KN-M) PLUS DRILLING DEPTHS OF UP TO 90 FEET (27 METERS) ON SLOPE DRILLING DRILLING WITH CASING LONG AUGER DRILLING LOW OVERHEAD DRILLING OVER OBSTACLE DRILLING UNLEVEL TERRAIN DRILLING

14 FIND THE LŌDRIL RIG THAT S RIGHT FOR YOU LŌDRIL SPECS Units DH15 DH20 DH30 DH40 DH60 Rotary torque (max) 1 ft-lbs kn-m 15,000 20 21,500 30 30,000 40 43,000 60 65,000 95 Kelly winch line pull (first layer, max) lbs kn 8,000 35 12,000 53 18,000 80 25,000* 110* 30,000* 130* Hole diameter 2 in mm 36 900 48 1,200 60 1,500 84 2,100 108 2,700 Drill speed range (LHS) 3 RPM 30/60/100 30/60/100 40/100/140* 30/60/100 30/60/100 Hole depth (max) 4 ft m 80 24 80 24 80 24 80 24 90 27 Attachment height 4 ft m 9-21 2.7-6.4 10-21 3.0-6.4 16-26 4.9-8.0 14-26 4.3-8.0 17-32 5.2-9.8 Excavator weight class x 1000 5 lbs kg 16-35 7-15 35-50 15-22 50-65 22-29 50-65 22-29 70-95 32-43 LōDril upgrades + + Kelly bar upgrades, with a choice of three grades of material + + Kelly winch upgrade to a larger winch for maximum hoisting + + Add a service winch to make tool changes quick and convenient + + Round, self-locking kellys to increase crowd force in hard drilling conditions + + Reaction jack in combination with round, self-locking kellys to handle tough rock + + Power line detector that sounds when you re close to live overhead lines + + Boom modification to maximize the size of the LōDril you can put on a smaller excavator + + Telescoping boom to work out further beyond the tracks or increase crowd force and flexibility + + Quick disconnect to easily remove the LōDril from the excavator Need more options? We ll custom engineer the right rig for you. *With upgrade 1 Running torque at low drill speed 2 Dependent on ground conditions, tooling and operation 3 Dependent on excavator 4 LōDril configuration specific 5 Excavator modifications may be required

15 IF YOU WANT TO BE WOWED, THEN YOU NEED TO ADD A LŌDRIL TO YOUR FLEET. Gene E. Sheedy, President, Midwest Drilling Foundations & Engineering, Inc.

16

17

18 LAD SERIES

19 THE LAD SERIES DRILLS GET YOU INTO TIGHT SPOTS AND OUT AGAIN The LAD Series was specially designed to bring deep-drilling capabilities to severely restricted-access jobs. With attachment heights as short as 6.5 feet (2 meters), these small rigs can drill to depths of 70 feet (21 meters), combined with a wide torque range allowing you to make quick work of tough soil conditions. The LAD Series drilling speeds crush the competition s, maintaining high torque ratings at higher drill speeds, significantly increasing your daily production. Compared with some other limited-access drills on the market, the LAD Series beats them on rotary torque and headroom clearance, too. Look to the LAD Series when the job isn t easy: + + Residential foundations + + Elevator shafts + + Engineered landscape projects + + Substations + + Power lines + + Inside buildings DRILL SPEEDS UP TO 100 RPM, PLUS DRILLING DEPTHS OF UP TO 70 FEET (21 METERS)

20 FIND THE LAD SERIES RIG THAT S RIGHT FOR YOU LAD SERIES SPECS Units LAD50 LAD80 LAD100 LAD250 LAD400 Rotary torque (max) ft-lbs kn-m 5,000 7 8,000 11 10,000 14 25,000 34 40,000 54 Kelly winch line pull (first layer, max) lbs kn 5,000 22 5,000 22 8,000 35 12,000 53 18,000 80 Hole diameter 1 in mm 32 750 36 900 42 1,050 54 1,370 84 2,100 Drill speed range (LHS) RPM 20/60/100 30/60/100 30/60/100 30/60/100 30/60/100 Hole depth (max) 2 ft m 40 12 50 15 70 21 50 15 60 18 Attachment height 2 ft m 8 2.4 6.5 2 8 2.4 9.5 2.9 11 3.4 Excavator weight class x 1000 3 lbs kg 12-16 5.5-7 16-29 7-13 18-31 8-15 31-50 15-22 40-65 18-29 Need more options? We ll custom engineer the right rig for you. 1 Dependent on ground conditions, tooling and operation 2 Dependent on configuration 3 Excavator modifications may be required or anticipated

21 WE HAVE PUT THE LAD100 IN THE TIGHTEST SPACES AND THROUGH THE MOST TREACHEROUS TERRAIN... THIS RIG HAS COME OUT ON TOP EVERY TIME AND PROVEN ITSELF TO BE THE MOST WIDELY USED AND PROFITABLE RIG WE OWN. Mike Duffey, Kindness General Contractors, Inc.

22 AERA

23 ONE FLEXIBLE, POWERFUL RIG. MANY APPLICATIONS. The AERA (Articulated Earth Retention Attachment) is an excavator-mounted drilling rig that will outperform other rigs on everything from wide open spaces to obstacles to slopes. Whether you need a long-stroke, single-pass machine, or a short-stroke rig to replace your conventional crawler, the AERA s unsurpassed mast articulation, in-cab controls for comfort and endless customization options mean productivity and profits for the long haul. The AERA s versatility can help you tackle a wide variety of profitable projects. Quick between holes and efficient over the hole, the AERA will make you raise your hand for jobs you ve overlooked in the past. The AERA performs when tackling: + + Micropiles + + Jet grouting + + Seismic retrofit + + Tiebacks + + Wick drains + + Slope stabilization + + Soil nails + + Geothermal ROTARY SPEED UP TO 100 RPM PLUS MINIMUM BENCH AS LOW AS 12 FEET (3.5 METERS) SIDE VIEW FRONT VIEW TOP VIEW

24 FIND THE AERA RIG THAT S RIGHT FOR YOU AERA SMALL BORE SPECS Stroke Minimum bench Feed system* Mast scope Operating dimensions Transport specs Excavator class Units 1008 1420 1430 1440 ft 8 20 30 40 m 2.5 6 9 12 ft 8 11 11 12 m 2.5 3 3 3.5 Type Cylinder Motor Motor Motor Crowd lbs 6,600 12,000 12,000 12,000 kn 30 50 50 50 Pullback lbs 6,600 12,000 12,000 12,000 kn 30 50 50 50 ft 2 4 4 4 mm 600 1,200 1,200 1,200 Dim A ft 17.9 31.3 41.3 51.3 mm 5,455 9,590 12,590 15,635 Dim B ft 11.7 12.5 12.5 13.2 mm 3,565 3,810 3,810 4,025 Dim C degrees 210 210 210 210 Dim D degrees 95 95 95 95 Dim E ft 7.2 9.1 9.1 9.1 mm 2,195 2,775 2,775 2,775 Height ft 10.5 11.5 11.5 11.5 mm 3,200 3,505 3,505 3,505 Length ft 23.7 35.5 45.5 55.5 mm 7,225 10,820 13,870 16,915 Width ft 8.5 8.5 10.5 11.1 mm 2,590 2,590 3,200 3,385 Weight lbs 35,000 58,000 62,000 66,000 kg 15,900 26,400 28,200 30,000 Weight lbs 20,000 30,000 40,000 40,000 kg 9,100 13,600 20,000 20,000 Power HP 80 125 140 150 kw 59 57 64 68

25 AERA SMALL BORE ROTARY SPECS ROTARY HEAD MODEL Units HS8 HS10 HS12 HS14 HS18 Torque (max) ft-lbs kn-m 8,000 11 10,000 14 12,000 16 14,000 19 18,000 24 Pressure (max) psi bar 2,900 200 4,400 300 2,400 165 3,200 220 3,500 240 Speed (max) RPM 100 100 40 60 60 Weight lbs kg 450 205 600 270 265 120 1,000 455 1,100 500 AERA upgrades + + Rotary head, percussion head or double-head configuration options + + Add a rotary off hole slide or rotary off axis swing to make tool installation a breeze + + Service winch to easily handle tooling + + Wide range of clamps, including blocking, breakout and pullback clamps + + Inclination/stroke indicator for accurate read-outs so you ll always produce the appropriate hole + + Boom modifications to maximize the size of the AERA + + Telescoping boom to enhance flexibility + + Water pumps to flush or control dust from tooling + + Hydraulic chuck for jet grouting + + Rod changer to increase the depth capacity + + Dual feed system for full mast lower and upper rotary feed control Need more options? We ll custom engineer the right rig for you. *Specifications may be limited by excavator engine power

26 WE HAD A PROBLEM WITH OUR RIG ON ITS MAIDEN VOYAGE: WE UNDERESTIMATED THE PRODUCTION OF THE AERA 1440. WE HAD TO MAN UP TO KEEP UP THIS WAS A GOOD PROBLEM TO HAVE. Kim Coffey, Beaty Construction, Inc.

27 Give us a call Toll free (888) 569-3745 Local (208) 687-3311 Fax (208) 687-4153 New Zealand/Australia +61 408 805 757 24/7 service Toll free (888) 569-3745 Local (208) 687-3311 After hours (208) 446-4691 Send us an email Sales: sales@bayshoresystems.com Customer service: service@bayshoresystems.com Stop by for a visit Bay Shore Systems, Inc. 14206 North Ohio Street Rathdrum, ID 83858 bayshoresystems.com US Offices: Houston, TX Dallas, TX Miami, FL Atlanta, GA Boston, MA Rathdrum, ID (headquarters) International Office: Sydney, Australia