RSTRTS ST SRS R TR SYST TTS S ST... 3 SS RR WR W... 3 Work low...3 TRTTT T... 5 nspection rocedure...5 Trouble iagnosis with SUT...5 SYST SRT... 6 SRS R SYST... 6 SRS onfiguration...6 SRS omponent arts ocation...7 river ir ag odule...7 ront assenger ir ag odule...8 ront Side ir ag...8 Side urtain ir ag...8 ront Seat elt re-tensioner...8 SRS omponent onnectors...9 UT SST SYST...10 System iagram...10 ccupant lassification System (S)...10 SSR ST T WR SYS- T...11 System iagram...11 System escription...11 omponent arts ocation...11 R ST () SYST...12 Trouble iagnosis ntroduction...12 SRS peration heck...12 Trouble iagnosis without SUT...14 SUT unction (R )...14 Self-iagnosis unction (Without SUT)...14 T/RUT SS...16 1049 1052, 1054 1057 RVR R- U...16 escription...16 T ogic...16 iagnosis rocedure (omponent iagnosis)...17 1065 1068, 1070 1073 SS- R R U...19 escription...19 T ogic...19 iagnosis rocedure (omponent iagnosis)...20 1134 1137 S R U H...22 escription...22 T ogic...22 iagnosis rocedure (omponent iagnosis)...23 1129 1132 S R U RH...25 escription...25 T ogic...25 iagnosis rocedure (omponent iagnosis)...26 1150 1153 S URT R U H...28 escription...28 T ogic...28 iagnosis rocedure (omponent iagnosis)...29 1145 1148 S URT R U RH...31 escription...31 T ogic...31 iagnosis rocedure (omponent iagnosis)...32 1086 1089 ST T R-TS- R H...34 escription...34 T ogic...34 iagnosis rocedure (omponent iagnosis)...35 1081 1084 ST T R-TS- R RH...37 escription...37 T ogic...37-1
iagnosis rocedure (omponent iagnosis)... 38 1033 1035 RSH Z SSR... 40 escription... 40 T ogic... 40 iagnosis rocedure (omponent iagnosis)... 41 1118 1120 STT SSR H... 43 escription... 43 T ogic... 43 iagnosis rocedure (omponent iagnosis)... 44 1113 1115 STT SSR RH... 46 escription... 46 T ogic... 46 iagnosis rocedure (omponent iagnosis)... 47 1XXX R SS SSR UT... 49 escription... 49 T ogic... 49 iagnosis rocedure (omponent iagnosis)... 50 1023 SSR R - TR... 51 escription... 51 T ogic... 51 iagnosis rocedure (omponent iagnosis)... 52 1017 1022 UT SS- T SYST... 54 escription... 54 T ogic... 54 iagnosis rocedure (omponent iagnosis)... 55 1209 1210 S TT... 57 escription... 57 T ogic... 57 iagnosis rocedure (omponent iagnosis)... 57 U SS RT... 58 SS SSR UT... 58 Trouble iagnosis with SUT... 58 Trouble iagnosis without SUT... 60 WR R... 64 SRS R TR SYST... 64 Wiring iagram... 64 SYT SS... 74 SRS R SYST... 74 "R " Warning amp oes ot Turn ff... 74 "R " Warning amp oes ot Turn n... 74 SSR ST T WR SYS- T... 76 Seat elt Warning System oes ot unction... 76 RUT... 77 RUTS... 77 recaution for Supplemental Restraint System (SRS) "R " and "ST T R-T- SR"... 77 recaution for SRS "R " and "ST T R-TSR" Service... 77 ccupant lassification System recaution... 77-2
< S ST > SS RR WR W S ST SS RR WR W Work low VR SQU :0000000006236373 WH0310 *1-12, "Trouble iagnosis ntroduction" *4-14, "Self-iagnosis unction (Without SUT)" T WR W 1.USTR RT et detailed information from the customer about the symptom. *2-12, "SRS peration heck" *3-5, "Trouble iagnosis with SUT" >> T 2 2.RRY H erform preliminary check. Refer to -12, "Trouble iagnosis ntroduction". -3
< S ST > >> T 3 3.TH SRV UTS heck for technical service bulletins. >> T 4 4.USR SS RR WR W erform self-diagnosis using the "R " warning lamp in User mode. Refer to -12, "SRS peration heck". >> T 5 5.S-SS erform S-SS. Refer to -5, "Trouble iagnosis with SUT" (w/sut) or -14, "Self-iagnosis unction (Without SUT)" (w/o SUT). >> T 6 6.R RT Replace the malfunctioning part. >> T 7 7. H heck SRS using iagnosis mode and User mode. oes iagnosis mode and User mode indicate SRS normal? YS >> nspection nd. >> T 5-4
< S ST > TRTTT T nspection rocedure TRTTT T :0000000006236374 TRTTT TRU n intermittent incident may have occured in the past but is not being detected currently. This T will not be detected on S [URRT], but may be viewed on S [ST] using SUT. Trouble iagnosis with SUT ST RUR 4 heck SRS Repair History :0000000006236375 1.SR SSTY THT S-ST RSUT WS T RS TR RR heck repair history of the SRS. Have any previous repairs been made to the SRS? Yes >> Self-diagnostic result S- [ST] (previously stored in the memory) might not be erased after repair. roceed to "ST RUR 3". Refer to -14, "Self-iagnosis unction (Without SUT)". o >> roceed to "ST RUR 2". Refer to -12, "SRS peration heck". -5
< SYST SRT > SYST SRT SRS R SYST SRS onfiguration SRS R SYST :0000000006236376 WH0186 The air bag deploys if the air bag diagnosis sensor unit is activated while the ignition switch is in the or STRT position. The collision modes for which supplemental restraint systems are activated are different among the SRS systems. or example, the driver air bag module, front passenger air bag module and front seat belt pre-tensioners are activated in a frontal collision but not in a side collision. SRS configurations for some collision modes are as follows: SRS configuration rontal collision eft side collision Right side collision river air bag module ront passenger air bag module ront H seat belt pre-tensioner ront RH seat belt pre-tensioner ront H side air bag module ront RH side air bag module H side curtain air bag module RH side curtain air bag module -6
< SYST SRT > SRS omponent arts ocation SRS R SYST :0000000006236377 1. rash zone sensor 2. Spiral cable 3. ront passenger air bag off indicator 4. ront H seatbelt pre-tensioner 5. ir bag diagnosis sensor unit 6. ront H side air bag module H side air bag (satellite) sensor 7. Seat belt buckle switch (H) Seat belt buckle switch (RH) river ir ag odule 8. ccupant classification system control unit and sensor mat The driver air bag module is dual stage and located in the steering wheel assembly. t operates with the SRS system in a frontal collision exceeding a specified level. WH0329 9. ront RH seatbelt pre-tensioner RH side air bag (satellite) sensor 10. ront RH side air bag module 11. RH side curtain air bag module 12. H side curtain air bag module 13. ront passenger air bag module 14. river air bag module :0000000006236378 WH0226ZZ -7
< SYST SRT > ront assenger ir ag odule SRS R SYST :0000000006236379 The front passenger air bag module is located behind the instrument panel assembly. t operates with the SRS system in a frontal collision exceeding a specified level. Refer to -10, "ccupant lassification System (S)" for more information. ront Side ir ag WH0227ZZ :0000000006236380 ront side air bag modules are built into the front seatback assemblies. Vehicles with side air bags are equipped with labels as shown. Side urtain ir ag WH0327 :0000000006236381 Side curtain air bag modules are located above the vehicle headlining. Vehicles with side curtain air bags are equipped with labels as shown. ront Seat elt re-tensioner The seat belt pre-tensioner system with load limiter is installed for both the driver's seat and the front passenger's seat. t operates simultaneously with the SRS air bag system in the event of a frontal collision with an impact exceeding a specified level. When the frontal collision with an impact exceeding a specified level occurs, seat belt slack resulting from clothing or other factors is immediately taken up by the pre-tensioner. Vehicle passengers are securely restrained. When passengers in a vehicle are thrown forward in a collision and the restraining force of the seat belt exceeds a specified level, the load limiter permits the specified extension of the seat belt by the twisting of the R shaft, and a relaxation of the chest-area seat belt web tension while maintaining force. WH0041 :0000000006236382 WH0229ZZ -8
< SYST SRT > SRS omponent onnectors SRS R SYST RT T The following SRS components use direct-connect style harness connectors. river front air bag module assenger front air bag module H side curtain air bag module RH side curtain air bag module ront H seat belt pre-tensioner ront RH seat belt pre-tensioner lways pull up to release locking tab prior to removing connector from SRS component. lways push down to lock locking tab after installing connector to SRS component. When locked, the locking tab is level with the connector housing. :0000000008079924 WH0103 S U new style slide double locking type connector is used on certain systems and components, especially those related to airbag control systems. The slide double locking type connectors help prevent incomplete locking and accidental looseness or disconnection. The slide double locking type connectors are disconnected by pushing or pulling the slider. Refer to the figure below. UT: o not pull the harness or wires when disconnecting the connector. 0498-9
UT SST SYST < SYST SRT > UT SST SYST System iagram :0000000006236384 H0026 ccupant lassification System (S) :0000000006236385 The occupant classification system (S) identifies if a child or child seat is present in the front passenger seat. The S receives inputs from the occupant classification sensor mat (1) which is located inside the passenger seat cushion assembly. epending on classification of the passenger, the S control unit (2) sends a signal to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit uses this signal and the seat belt buckle switch RH signal to determine deployment or non-deployment of the front passenger air bag module in the event of a collision. epending on the signals received, the air bag diagnosis sensor unit can disable the front passenger air bag module completely. WH0230ZZ T: n case of customer concern, SUT can be used to confirm the front passenger air bag status (readiness). ront assenger ir ag Status onditions ront assenger Seat (ondition) SS R ndicator (Status) ront assenger ir ag Status (Readiness) Seat occupied ctive (enabled) Seat occupied T eactivated (disabled) Seat empty eactivated (disabled) T: assenger does not meet ccupant lassification System specifications for passenger air bag activation. SUT isplay -10
< SYST SRT > SSR ST T WR SYST SSR ST T WR SYST System iagram :0000000006236386 System escription The seat belt warning lamp (1) will remind the driver if the driver or front passenger seat belt should be buckled. The system works in conjunction with the occupant classification system. Refer to - 10, "ccupant lassification System (S)". H0028 :0000000006236387 WH0228ZZ assenger Seat elt Warning System peration river seat status assenger seat status (gnition switch ) Seat occupied Seat occupied omponent arts ocation Refer to -7, "SRS omponent arts ocation". Seat belt buckle switch H status uckled Seat belt buckle switch RH status uckled Unbuckled Seat unoccupied ff Unbuckled n Seat belt warning lamp ff n :0000000006236388-11
R ST () SYST < SYST SRT > R ST () SYST Trouble iagnosis ntroduction :0000000006236389 UT: o not use electrical test equipment on any circuit related to the SRS unless instructed to do so in this Service anual. SRS wiring harnesses can be identified by yellow and/or orange harness connectors. o not attempt to repair, splice or modify SRS wiring harnesses. f a harness is damaged, replace it with a new one. eep ground connections clean. SS UT The SRS self-diagnosis results can be read by using R warning lamp and/or SUT. The User mode is exclusively prepared for the customer (driver). This mode warns the driver of a system malfunction through the operation of the R warning lamp. The iagnosis mode allows the technician to locate and inspect the malfunctioning part. The mode applications for the R warning lamp and SUT are as follows: HW T RR TRU SS R QU URT RR good understanding of the malfunction conditions can make troubleshooting faster and more accurate. n general, each customer feels differently about a malfunction. t is important to fully understand the symptoms or conditions for a customer complaint. nformation rom ustomer WHT - Vehicle model WH - ate, requencies WHR - Road conditions HW - perating conditions, Symptoms User mode iagnosis mode isplay type R warning lamp X X - operation SUT X onitoring reliminary heck heck that the following parts are in good order. attery use System component-to-harness connections SRS peration heck :0000000006236390 ST RUR 1 hecking SRS peration Using R Warning amp User ode 1. Turn the ignition switch from to, and check that the air bag warning lamp blinks. 2. ompare the SRS air bag warning lamp blinking pattern with the examples. -1845-12
< SYST SRT > R ST () SYST SRS ir bag warning lamp examples R warning lamp (User mode) SRS condition Reference item o malfunction is detected. o further action is necessary. SH0011 The system is malfunctioning and needs to be repaired as indicated. roceed to ST R- UR 2 that follows (with - SUT) or -14, "Trouble iagnosis without SUT" (without SUT). SH0012 ir bag is deployed. Seat belt pre-tensioner is deployed. roceed to S - SS SR-26, "or rontal ollision" or SR-28, "or Side and Rollover ollision". ir bag diagnosis sensor unit is malfunctioning. ir bag power supply circuit is malfunctioning. SRS air bag warning lamp circuit is malfunctioning. Refer to -74, ""R " Warning amp oes ot Turn ff". SH0013 ir bag diagnosis sensor unit is malfunctioning. ir bag warning lamp circuit is malfunctioning. Refer to -74, ""R " Warning amp oes ot Turn n". ST RUR 2 SH0014 1. onnect SUT. 2. iagnostic code is displayed on "S- [URRT]". f no malfunction is detected on "S- [URRT]", but malfunction is detected in "SRS peration heck" using the "R " warning lamp, the following cases may exist: "S- [ST]" memory might not be erased. The SRS system malfunctions intermittently. erform ST RUR 4. Refer to -14, "Self-iagnosis unction (Without - SUT)". -13
R ST () SYST < SYST SRT > Trouble iagnosis without SUT :0000000006236391 ST RUR 6 nspect SRS alfunction Using "R " Warning amp iagnosis ode T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1. 2. fter R warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3. Wait more than 3 seconds. 4. Repeat steps 1 to 3 two more times (3 times total). 5. SRS is now in iagnosis mode. Refer to -60, "Trouble iagnosis without SUT". SUT unction (R ) SUT can display each diagnostic item using the diagnostic test modes shown. R diagnostic mode S- [URRT] S- [ST] TRU RR U SRT. SSR R Self-iagnosis unction (Without SUT) escription :0000000006236392 current Self-diagnosis result (also indicated by the number of warning lamp flashes in the iagnosis mode) is displayed on the SUT screen in real time. This refers to a malfunctioning part requiring repairs. iagnosis results previously stored in the memory are displayed on the SUT screen. The stored results will remain until memory erasing is executed. With TRU RR, diagnosis results previously erased by a reset operation can be displayed on the SUT screen. ir bag diagnosis sensor unit U discriminated number (identification number) or part number is displayed. ir bag diagnosis sensor unit has individual U discriminated number (identification number) or part number based on model and equipment. The STTUS (readiness) of the front passenger air bag module is displayed. The STTUS displayed (/) depends on the signals supplied to the occupant classification system control unit and air bag diagnosis sensor unit. Refer to -10, "ccupant lassification System (S)" for more information. :0000000006236393 The reading of these results is accomplished using one of two modes User mode and iagnosis mode. fter a malfunction is repaired, turn the ignition switch for at least one second, then back. iagnosis mode returns to the User mode. t that time, the self-diagnostic result is cleared. -14
< SYST SRT > HW T H S-SS R ST () SYST ST RUR 3 inal heck of SRS Using SUT - iagnosis ode WH0232 1. onnect SUT. 2. f no T is detected on S- [URRT], repair of SRS is completed. o to step 3. f any T is detected on S- [URRT], the malfunctioning part has not been repaired completely or another malfunctioning part is being detected. erform ST RUR 2. Refer to -12, "SRS peration heck". 3. Touch RS. T: Touch RS to clear the memory of the malfunction ( S- [ST] ). f the memory of the malfunction in S- [ST] is not erased, the User mode shows the system malfunction by the operation of the warning lamp even if the malfunction is repaired completely. 4. Touch key of SUT. Touch S- [ST]. 5. heck that no malfunction is detected on S- [ST]. 6. Touch key of SUT to return to User mode from iagnosis mode. 7. Turn ignition switch and then turn off and disconnect SUT. 8. o to -12, "SRS peration heck". ST RUR 4 heck SRS Repair History 1.SR SSTY THT S-ST RSUT WS T RS TR RR heck repair history of the SRS. Have any previous repairs been made to the SRS? Yes >> Self-diagnostic result S- [ST] (previously stored in the memory) might not be erased after repair. erform ST RUR 3. Refer to -14, "Self-iagnosis unction (Without SUT)". o >> erform ST RUR 2. Refer to -12, "SRS peration heck". -15
1049 1052, 1054 1057 RVR R U < T/RUT SS > T/RUT SS 1049 1052, 1054 1057 RVR R U escription :0000000006236394 T 1049 1052, 1054 1057 RVR R U The driver air bag module is dual stage and wired to the air bag diagnosis sensor unit through the spiral cable. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the driver air bag module including the spiral cable. RT T Refer to -7, "SRS omponent arts ocation". T ogic :0000000006236395 T TT With SUT SUT name T T detecting condition Repair order RVR R U [] RVR R U [V-SHRT] 1049 1054 1050 1055 river air bag module circuit (R1) is open (including the spiral cable). river air bag module circuit (R2) is open (including the spiral cable). river air bag module circuit (R1) is shorted to a power supply circuit (including the spiral cable). river air bag module circuit (R2) is shorted to a power supply circuit (including the spiral cable). 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. nspect spiral cable circuit. 4. Replace the air bag diagnosis sensor unit. 5. Replace the driver air bag module. 6. Replace the related harness. RVR R U [-SHRT] 1051 1056 river air bag module circuit (R1) is shorted to ground (including the spiral cable). river air bag module circuit (R2) is shorted to ground (including the spiral cable). RVR R U [SHRT] 1052 1057 river air bag module circuits (R1) are shorted to each other (including the spiral cable). river air bag module circuits (R2) are shorted to each other (including the spiral cable). Without SUT WH0311 T RT RUR (With SUT) -16
1049 1052, 1054 1057 RVR R U < T/RUT SS > 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -17, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter diagnosis mode if no malfunction is detected in User mode. 1.T SWTH >> T 2 2.T SWTH fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. >> T 3 3.WT T Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 :0000000006236396-17
1049 1052, 1054 1057 RVR R U < T/RUT SS > 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.H SR RUT 1. Turn ignition switch. 2. isconnect driver air bag module connector and combination switch (spiral cable) connector. 3. heck continuity between driver air bag module harness connector and combination switch (spiral cable) harness connector. river air bag module ombination switch (spiral cable) onnector Terminal onnector Terminal 1 28 105 2 30 29 3 29 106 4 30 4. heck continuity between driver air bag module harness connector and ground. ontinuity YS onnector s the inspection result normal? YS >> T 4 >> Replace combination switch (spiral cable). Refer to SR-7, "Removal and nstallation". 4.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 5 5.RVR R U Replace the driver air bag module. Refer to SR-4, "Removal and nstallation". >> T 6 6.RT HRSS Replace the related harness. >> 105 106 river air bag module Terminal 1 2 3 4 round ontinuity -18
1065 1068, 1070 1073 SSR R U < T/RUT SS > 1065 1068, 1070 1073 SSR R U escription :0000000006236397 T 1065 1068, 1070 1073 SSR R U The passenger air bag module is dual stage and wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the passenger air bag module. RT T Refer to -7, "SRS omponent arts ocation". T ogic T TT With SUT SUT name T T detecting condition Repair order SSST / U [] SSST / U [V-SHRT] SSST / U [-SHRT] SSST / U [SHRT] 1065 1070 1066 1071 1067 1072 1068 1073 ront passenger air bag module circuit (S1) is open. ront passenger air bag module circuit (S2) is open. ront passenger air bag module circuit (S1) is shorted to a power supply circuit. ront passenger air bag module circuit (S2) is shorted to a power supply circuit. ront passenger air bag module circuit (S1) is shorted to ground. ront passenger air bag module circuit (S2) is shorted to ground. ront passenger air bag module circuits (S1) are shorted to each other. ront passenger air bag module circuits (S2) are shorted to each other. :0000000006236398 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the front passenger air bag module. 5. Replace the related harness. Without SUT WH0312 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. -19
1065 1068, 1070 1073 SSR R U < T/RUT SS > s the T detected? YS >> Refer to -20, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter diagnosis mode if no malfunction is detected in User mode. 1.T SWTH >> T 2 2.T SWTH fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. >> T 3 3.WT T Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) :0000000006236399 Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". -20
1065 1068, 1070 1073 SSR R U < T/RUT SS > >> T 4 4.RT SSR R U Replace the front passenger air bag module. Refer to SR-9, "Removal and nstallation". >> T 5 5.RT HRSS Replace the related harness. >> -21
1134 1137 S R U H < T/RUT SS > 1134 1137 S R U H escription :0000000006236400 T 1134 1137 RT H S R U The front H side air bag module is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the front H side air bag module. RT T Refer to -7, "SRS omponent arts ocation". T ogic :0000000006236401 T TT With SUT SUT name T T detecting condition Repair order S U H [] S U H [V-SHRT] S U H [-SHRT] S U H [SHRT] 1134 1135 1136 1137 ront H side air bag module circuit is open. ront H side air bag module circuit is shorted to a power supply circuit. ront H side air bag module circuit is shorted to ground. ront H side air bag module circuits are shorted to each other. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the front H side air bag module. 5. Replace the related harness. Without SUT WH0304 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -23, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter diagnosis mode if no malfunction is detected in User mode. 1.T SWTH -22
< T/RUT SS > >> T 2 2.T SWTH 1134 1137 S R U H fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 4 4.RT H S R U Replace the front H side air bag module. :0000000006236402 >> T 5 5.RT HRSS -23
1134 1137 S R U H < T/RUT SS > Replace the related harness. >> -24
< T/RUT SS > 1129 1132 S R U RH 1129 1132 S R U RH escription :0000000006236403 T 1129 1132 RT RH S R U The front RH side air bag module is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the front RH side air bag module. RT T Refer to -7, "SRS omponent arts ocation". T ogic T TT With SUT SUT name T T detecting condition Repair order S U RH [] S U RH [V-SHRT] S U RH [-SHRT] S U RH [SHRT] Without SUT 1129 1130 1131 1132 ront RH side air bag module circuit is open. ront RH side air bag module circuit is shorted to a power supply circuit. ront RH side air bag module circuit is shorted to ground. ront RH side air bag module circuits are shorted to each other. :0000000006236404 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the front side air bag module. 5. Replace the related harness. WH0305 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -26, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter diagnosis mode if no malfunction is detected in User mode. 1.T SWTH -25
1129 1132 S R U RH < T/RUT SS > >> T 2 2.T SWTH fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) :0000000006236405 Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 4 4.RT RH S R U Replace the front RH side air bag module. >> T 5 5.RT HRSS -26
< T/RUT SS > Replace the related harness. >> 1129 1132 S R U RH -27
1150 1153 S URT R U H < T/RUT SS > 1150 1153 S URT R U H escription :0000000006236406 T 1150 1153 H S URT R U The H side curtain air bag module is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the H side curtain air bag module. RT T Refer to -7, "SRS omponent arts ocation". T ogic :0000000006236407 T TT With SUT SUT name T T detecting condition Repair order URT U H [] URT U H [V-SHRT] URT U H [-SHRT] URT U H [SHRT] 1150 1151 1152 1153 H side curtain air bag module circuit is open. H side curtain air bag module circuit is shorted to a power supply circuit. H side curtain air bag module circuit is shorted to ground. H side curtain air bag module circuits are shorted to each other. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the H side curtain air bag module. 5. Replace the related harness. Without SUT WH0309 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -29, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1.T SWTH -28
< T/RUT SS > >> T 2 2.T SWTH 1150 1153 S URT R U H fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 4 4.H S URT R U Replace the H side curtain air bag module. Refer to SR-11, "Removal and nstallation". :0000000006236408 >> T 5 5.RT HRSS -29
1150 1153 S URT R U H < T/RUT SS > Replace the related harness. >> -30
< T/RUT SS > 1145 1148 S URT R U RH 1145 1148 S URT R U RH escription :0000000006236409 T 1145 1148 RH S URT R U The RH side curtain air bag module is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the RH side curtain air bag module. RT T Refer to -7, "SRS omponent arts ocation". T ogic T TT With SUT SUT name T T detecting condition Repair order URT U RH [] URT U RH [V-SHRT] URT U RH [-SHRT] URT U RH [SHRT] Without SUT 1145 1146 1147 1148 RH side curtain air bag module circuit is open. RH side curtain air bag module circuit is shorted to a power supply circuit. RH side curtain air bag module circuit is shorted to ground. RH side curtain air bag module circuits are shorted to each other. :0000000006236410 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the RH side curtain air bag module. 5. Replace the related harness. WH0308 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -32, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1.T SWTH -31
1145 1148 S URT R U RH < T/RUT SS > >> T 2 2.T SWTH fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) :0000000006236411 Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 4 4.RH S URT R U Replace the RH side curtain air bag module. Refer to SR-11, "Removal and nstallation". >> T 5 5.RT HRSS -32
< T/RUT SS > Replace the related harness. >> 1145 1148 S URT R U RH -33
1086 1089 ST T R-TSR H < T/RUT SS > 1086 1089 ST T R-TSR H escription :0000000006236412 T 1086 1089 ST T R-TSR H The seat belt pre-tensioner H is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the seat belt pre-tensioner H. RT T Refer to -7, "SRS omponent arts ocation". T ogic :0000000006236413 T TT With SUT SUT name T T detecting condition Repair order R-T RT H [] R-T RT H [V-SHRT] R-T RT H [-SHRT] R-T RT H [SHRT] 1086 1087 1088 1089 H seat belt pre-tensioner circuit is open. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. H seat belt pre-tensioner circuit is shorted to a power supply circuit. H seat belt pre-tensioner circuit is shorted to ground. H seat belt pre-tensioner circuits are shorted to each other. 3. Replace the front H seat belt pre-tensioner. 4. Replace the air bag diagnosis sensor unit. 5. Replace the related harness. Without SUT WH0263 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -35, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1.T SWTH -34
< T/RUT SS > >> T 2 2.T SWTH 1086 1089 ST T R-TSR H fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.RT H ST T R-TSR Replace the front H seat belt pre-tensioner. Refer to S-6, "Removal and nstallation". >> T 4 4.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". :0000000006236414 >> T 5 5.RT HRSS -35
1086 1089 ST T R-TSR H < T/RUT SS > Replace the related harness. >> -36
< T/RUT SS > 1081 1084 ST T R-TSR RH 1081 1084 ST T R-TSR RH escription :0000000006236415 T 1081 1084 ST T R-TSR RH The seat belt pre-tensioner RH is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the seat belt pre-tensioner RH. RT T Refer to -7, "SRS omponent arts ocation". T ogic T TT With SUT SUT name T T detecting condition Repair order R-T RT RH [] R-T RT RH [V-SHRT] R-T RT RH [-SHRT] R-T RT RH [SHRT] Without SUT 1081 1082 1083 1084 :0000000006236416 RH seat belt pre-tensioner circuit is open. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. RH seat belt pre-tensioner circuit is shorted to a power supply circuit. RH seat belt pre-tensioner circuit is shorted to ground. RH seat belt pre-tensioner circuits are shorted to each other. 3. Replace the front RH seat belt pre-tensioner. 4. Replace the air bag diagnosis sensor unit. 5. Replace the related harness. WH0262 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -38, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1.T SWTH -37
1081 1084 ST T R-TSR RH < T/RUT SS > >> T 2 2.T SWTH fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) :0000000006236417 Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.RT RH ST T R-TSR Replace the front RH seat belt pre-tensioner. Refer to S-6, "Removal and nstallation". >> T 4 4.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 5 5.RT HRSS -38
< T/RUT SS > Replace the related harness. >> 1081 1084 ST T R-TSR RH -39
1033 1035 RSH Z SSR < T/RUT SS > 1033 1035 RSH Z SSR escription :0000000006236418 T 1033 1035 RSH Z SSR The crash zone sensor is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the crash zone sensor. RT T Refer to -7, "SRS omponent arts ocation". T ogic :0000000006236419 T TT With SUT SUT name T T detecting condition Repair order RSH Z S [UT ] RSH Z S [ ] 1033 rash zone sensor has malfunctioned. 1. Visually check the wiring harness connection. 1034 1035 2. rash zone sensor communication error. Replace the harness if it has visible damage. 4. Replace the air bag diagnosis sensor unit. 3. Replace the crash zone sensor. 5. Replace the related harness. Without SUT WH0200 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -41, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1.T SWTH >> T 2-40
< T/RUT SS > 2.T SWTH 1033 1035 RSH Z SSR fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.RSH Z SSR Replace the crash zone sensor. Refer to SR-19, "Removal and nstallation". >> T 4 4.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 5 5.RT HRSS Replace the related harness. :0000000006236420-41
1033 1035 RSH Z SSR < T/RUT SS > >> -42
< T/RUT SS > 1118 1120 STT SSR H 1118 1120 STT SSR H escription :0000000006236421 T 1118 1120 STT SSR H The satellite sensor H is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor the satellite sensor H for internal failures and its circuits for communication errors. RT T Refer to -7, "SRS omponent arts ocation". T ogic T TT With SUT SUT name T T detecting condition Repair order STT SS H [UT ] STT SS H [ ] Without SUT 1118 1119 1120 H side air bag satellite sensor has malfunctioned. H side air bag satellite sensor communication error. :0000000006236422 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the H side air bag satellite sensor. 4. Replace the air bag diagnosis sensor unit. 5. Replace the related harness. WH0204 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -44, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1.T SWTH >> T 2-43
1118 1120 STT SSR H < T/RUT SS > 2.T SWTH fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) :0000000006236423 Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.H S R STT SSR Replace the H side air bag satellite sensor. Refer to SR-21, "Removal and nstallation". >> T 4 4.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 5 5.RT HRSS Replace the related harness. -44
< T/RUT SS > >> 1118 1120 STT SSR H -45
1113 1115 STT SSR RH < T/RUT SS > 1113 1115 STT SSR RH escription :0000000006236424 T 1113 1115 STT SSR RH The satellite sensor RH is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor the satellite sensor RH for internal failures and its circuits for communication errors. RT T Refer to -7, "SRS omponent arts ocation". T ogic :0000000006236425 T TT With SUT SUT name T T detecting condition Repair order STT SS RH [UT ] STT SS RH [ ] 1113 1114 1115 RH side air bag satellite sensor has malfunctioned. RH side air bag satellite sensor communication error. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the RH side air bag satellite sensor. 4. Replace the air bag diagnosis sensor unit. 5. Replace the related harness. Without SUT WH0203 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -47, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1.T SWTH >> T 2-46
< T/RUT SS > 2.T SWTH 1113 1115 STT SSR RH fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.RH S R STT SSR Replace the RH side air bag satellite sensor. Refer to SR-21, "Removal and nstallation". >> T 4 4.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 5 5.RT HRSS Replace the related harness. :0000000006236426-47
1113 1115 STT SSR RH < T/RUT SS > >> -48
< T/RUT SS > 1XXX R SS SSR UT 1XXX R SS SSR UT escription :0000000006236427 T 1XXX R SS SSR UT The air bag diagnosis sensor unit will run self diagnostics when the ignition switch is turned. t has the potential to set many diagnostic trouble codes which will conform to the 1XXX format, but will not match any other SRS diagnostic trouble codes. Refer to -58, "Trouble iagnosis with SUT". RT T Refer to -7, "SRS omponent arts ocation". T ogic :0000000006236428 T TT With SUT SUT name T T detecting condition Repair order TR UT Without SUT 1XXX ir bag diagnosis sensor unit is malfunctioning. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the related harness. WH0198 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -50, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1.T SWTH >> T 2-49
1XXX R SS SSR UT < T/RUT SS > 2.T SWTH fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) :0000000006236429 Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 4 4.RT HRSS Replace the related harness. >> -50
< T/RUT SS > 1023 SSR R TR 1023 SSR R TR escription :0000000006236430 T 1023 RT SSR R TR The front passenger air bag off indicator is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit monitors the front passenger air bag off indicator and circuit for failures. RT T Refer to -7, "SRS omponent arts ocation". T ogic T TT With SUT SUT name T T detecting condition Repair order SS / TR T Without SUT 1023 ront passenger air bag off indicator is malfunctioning. :0000000006236431 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the front passenger air bag off indicator. 4. Replace the air bag diagnosis sensor unit. 5. Replace the related harness. T RT RUR (With SUT) 1.ST STRT WH0212 >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -52, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1.T SWTH -51
1023 SSR R TR < T/RUT SS > >> T 2 2.T SWTH fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. 3.WT T >> T 3 Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -60, "Trouble iagnosis without SUT". >> iagnosis rocedure (omponent iagnosis) :0000000006236432 Recheck SRS after each replacement. 1.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 2 2.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. >> T 3 3.RT SSR R TR Replace the front passenger air bag off indicator. Refer to -11, "Removal and nstallation". >> T 4 4.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >> T 5 5.RT HRSS Replace the related harness. -52
< T/RUT SS > >> 1023 SSR R TR -53
1017 1022 UT SST SYST < T/RUT SS > 1017 1022 UT SST SYST escription :0000000006236433 T 1017 1022 UT SST SYST (S) The occupant classification system control unit is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor the occupant classification system for control unit and sensor mat failures and interruptions in communication between the S control unit and the air bag diagnosis sensor unit. RT T Refer to -7, "SRS omponent arts ocation". T ogic :0000000006236434 T TT With SUT SUT name T T detecting condition Repair order UT SS /U [UT ] UT SS [UT ] UT SS [THR ] UT SS /U [ ] 1017 The S control unit is malfunctioning. 1. Replace the RH front seat cushion assembly. 1020 1021 o not disassemble the seat cushion assembly. 1018 The S sensor mat is malfunctioning. 1019 1022 The S is malfunctioning. ommunication between the S control unit and the air bag diagnosis sensor unit is interrupted. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the RH front seat cushion assembly. o not disassemble the seat cushion assembly. 4. Replace the air bag diagnosis sensor unit. Without SUT WH0211 T RT RUR (With SUT) 1.ST STRT >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -55, "iagnosis rocedure (omponent iagnosis)". -54
1017 1022 UT SST SYST < T/RUT SS > >> nspection nd. T RT RUR (Without SUT) T: SRS will not enter iagnosis mode if no malfunction is detected in User mode. 1.T SWTH >> T 2 2.T SWTH fter air bag warning lamp lights for 7 seconds, turn ignition switch within 1 second. >> T 3 3.WT T Wait more than 3 seconds. >> T 4 4.RT STS Repeat steps 1 to 3 twice. >> T 5 5.T SWTH >> T 6 6.ST SRS system is now in iagnostic mode and R warning lamp flashes. Refer to -7, "SRS omponent arts ocation". >> iagnosis rocedure (omponent iagnosis) Recheck SRS after each replacement. 1.T oes SUT indicate 1022? YS or YS >> T 2 >> T 4 2.HRSS TR s there any visible damage to the connector? YS or YS >> Replace the harness. >> T 3 3.WR HRSS s there any visible damage to the harness? YS or YS >> Replace the harness. :0000000006236435-55
1017 1022 UT SST SYST < T/RUT SS > >> T 4 4.RH RT ST USH SSY Replace the RH front seat cushion assembly. Refer to S-63, "Removal and nstallation" (with climate controlled seats) or S-113, "Removal and nstallation" (without climate controlled seats). >> T 5 5.R SS SSR UT Replace the air bag diagnosis sensor unit. Refer to SR-23, "Removal and nstallation". >>. -56
< T/RUT SS > 1209 1210 S TT 1209 1210 S TT escription :0000000006236436 T 1209-1210 S TT The air bag diagnosis sensor unit will set this T if it has detected a collision which has resulted in a frontal or side deployment of one or more air bags or pre-tensioners. f this T is detected after a SRS repair, the air bag diagnosis sensor unit has not yet been replaced. This T can not be erased. RT T Refer to -7, "SRS omponent arts ocation". T ogic :0000000006236437 T TT With SUT SUT name T T detecting condition Repair order RT S TT S S - TT T RT RUR (With SUT) 1.ST STRT 1209 1210 river and/or front passenger air bag modules are deployed. Side and/or curtain air bag modules are deployed. Refer to SR-26, "or rontal ollision". Refer to SR-28, "or Side and Rollover ollision". >> T 2. 2.H S- RSUT heck for the T on SUT. s the T detected? YS >> Refer to -57, "iagnosis rocedure (omponent iagnosis)". >> nspection nd. iagnosis rocedure (omponent iagnosis) Refer to SR-26, "or rontal ollision" or SR-28, "or Side and Rollover ollision". :0000000006236438-57
SS SSR UT < U SS RT > U SS RT SS SSR UT Trouble iagnosis with SUT :0000000006236440 ST HRT T: ollow the procedures in numerical order when repairing malfunctioning parts. onfirm whether malfunction is eliminated using air bag warning lamp or SUT each time repair is finished. f malfunction is still observed, proceed to the next step. When malfunction is eliminated, further repair work is not required. SUT name T T detecting condition Repair order RVR R U [] RVR R U [V-SHRT] RVR R U [-SHRT] RVR R U [SHRT] SSST / U [] SSST / U [V-SHRT] SSST / U [-SHRT] SSST / U [SHRT] 1049 1054 1050 1055 1051 1056 1052 1057 1065 1070 1066 1071 1067 1072 1068 1073 river air bag module circuit (R1) is open (including the spiral cable). river air bag module circuit (R2) is open (including the spiral cable). river air bag module circuit (R1) is shorted to a power supply circuit (including the spiral cable). river air bag module circuit (R2) is shorted to a power supply circuit (including the spiral cable). river air bag module circuit (R1) is shorted to ground (including the spiral cable). river air bag module circuit (R2) is shorted to ground (including the spiral cable). river air bag module circuits (R1) are shorted to each other (including the spiral cable). river air bag module circuits (R2) are shorted to each other (including the spiral cable). ront passenger air bag module circuit (S1) is open. ront passenger air bag module circuit (S2) is open. ront passenger air bag module circuit (S1) is shorted to a power supply circuit. ront passenger air bag module circuit (S2) is shorted to a power supply circuit. ront passenger air bag module circuit (S1) is shorted to ground. ront passenger air bag module circuit (S2) is shorted to ground. ront passenger air bag module circuits (S1) are shorted to each other. ront passenger air bag module circuits (S2) are shorted to each other. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. nspect spiral cable circuit. 4. Replace the air bag diagnosis sensor unit. 5. Replace the driver air bag module. 6. Replace the related harness. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the front passenger air bag module. 5. Replace the related harness. -58
< U SS RT > SS SSR UT SUT name T T detecting condition Repair order S U H [] S U H [V-SHRT] S U H [-SHRT] S U H [SHRT] S U RH [] S U RH [V-SHRT] S U RH [-SHRT] S U RH [SHRT] URT U H [] URT U H [V-SHRT] URT U H [-SHRT] URT U H [SHRT] URT U RH [] URT U RH [V-SHRT] URT U RH [-SHRT] URT U RH [SHRT] R-T RT H [] R-T RT H [V-SHRT] R-T RT H [-SHRT] R-T RT H [SHRT] R-T RT RH [] R-T RT RH [V-SHRT] R-T RT RH [-SHRT] R-T RT RH [SHRT] RSH Z S [UT ] RSH Z S [ ] 1134 1135 1136 1137 1129 1130 1131 1132 1150 1151 1152 1153 1145 1146 1147 1148 1086 1087 1088 1089 1081 1082 1083 1084 ront H side air bag module circuit is open. ront H side air bag module circuit is shorted to a power supply circuit. ront H side air bag module circuit is shorted to ground. ront H side air bag module circuits are shorted to each other. ront RH side air bag module circuit is open. ront RH side air bag module circuit is shorted to a power supply circuit. ront RH side air bag module circuit is shorted to ground. ront RH side air bag module circuits are shorted to each other. H side curtain air bag module circuit is open. H side curtain air bag module circuit is shorted to a power supply circuit. H side curtain air bag module circuit is shorted to ground. H side curtain air bag module circuits are shorted to each other. RH side curtain air bag module circuit is open. RH side curtain air bag module circuit is shorted to a power supply circuit. RH side curtain air bag module circuit is shorted to ground. RH side curtain air bag module circuits are shorted to each other. H seat belt pre-tensioner circuit is open. H seat belt pre-tensioner circuit is shorted to a power supply circuit. H seat belt pre-tensioner circuit is shorted to ground. H seat belt pre-tensioner circuits are shorted to each other. RH seat belt pre-tensioner circuit is open. RH seat belt pre-tensioner circuit is shorted to a power supply circuit. RH seat belt pre-tensioner circuit is shorted to ground. RH seat belt pre-tensioner circuits are shorted to each other. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the front H side air bag module. 5. Replace the related harness. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the front RH side air bag module. 5. Replace the related harness. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the H side curtain air bag module. 5. Replace the related harness. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the RH side curtain air bag module. 5. Replace the related harness. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the front H seat belt pre-tensioner. 4. Replace the air bag diagnosis sensor unit. 5. Replace the related harness. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the front RH seat belt pre-tensioner. 4. Replace the air bag diagnosis sensor unit. 5. Replace the related harness. 1033 rash zone sensor has malfunctioned. 1. Visually check the wiring harness connection. 1034 1035 2. rash zone sensor communication error. Replace the harness if it has visible damage. 4. Replace the air bag diagnosis sensor unit. 3. Replace the crash zone sensor. 5. Replace the related harness. -59
SS SSR UT < U SS RT > SUT name T T detecting condition Repair order STT SS H [UT ] STT SS H [ ] STT SS RH [UT ] STT SS RH [ ] TR UT SS / TR T UT SS /U [UT ] UT SS [UT ] UT SS [THR ] UT SS /U [ ] RT S - TT S S T- T 1118 1119 1120 1113 1114 1115 1XXX 1023 Trouble iagnosis without SUT H side air bag satellite sensor has malfunctioned. H side air bag satellite sensor communication error. RH side air bag satellite sensor has malfunctioned. RH side air bag satellite sensor communication error. ir bag diagnosis sensor unit is malfunctioning. ront passenger air bag indicator is malfunctioning. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the H side air bag satellite sensor. 4. Replace the air bag diagnosis sensor unit. 5. Replace the related harness. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the RH side air bag satellite sensor. 4. Replace the air bag diagnosis sensor unit. 5. Replace the related harness. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the air bag diagnosis sensor unit. 4. Replace the related harness. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the front passenger air bag indicator. 4. Replace the air bag diagnosis sensor unit. 5. Replace the related harness. 1017 The S control unit is malfunctioning. 1. Replace the RH front seat cushion assembly. 1020 1021 o not disassemble the seat cushion assembly. 1018 The S sensor mat is malfunctioning. 1019 1022 1209 1210 The S is malfunctioning. ommunication between the S control unit and the air bag diagnosis sensor unit is interrupted. river and/or front passenger air bag modules are deployed. Side and/or curtain air bag modules are deployed. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace the RH front seat cushion assembly. o not disassemble the seat cushion assembly. 4. Replace the air bag diagnosis sensor unit. Refer to SR-26, "or rontal ollision". Refer to SR-28, "or Side and Rollover ollision". :0000000006236441 WR SH HRT T: ollow the procedures in numerical order when repairing malfunctioning parts. onfirm whether malfunction is eliminated using air bag warning lamp each time repair is finished. f malfunction is still observed, proceed to the next step. When malfunction is eliminated, further repair work is not required. SH0026-60
< U SS RT > SS SSR UT WH0311 WH0198 WH0312 WH0200 WH0262-61