PAS 1MF 5 DATA SHEET
PAS 1MF 5 Diesel - Qmax 5 m³/h (1,1 USgpm) - Hmax 36 m (118 ft) PAS 1MF 5 Liquid cooled engine PAS 1MF 5 Air cooled engine Benefits PAS MF - Vacuum prime centrifugal pumps The pump system consists of a centrifugal pump and a SuperDuo separator, which enables air to be separated from the liquid and be sucked by a vacuum pump making automatic priming possible. Even with suction heights of several meters the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the semi-open impeller, the PAS MF range is also suitable for pumping liquids with solids in suspension. Pump High efficiency: 7% (B.E.P.) Rapid "dry" priming Up to a height of 8.5 m (7.5 ft) High resistance To abrasive liquids and turbid sandy waters Applications Semi-open impeller Solids handling up to 5 mm (") Both Atlas Copco and Varisco have decades of experience in designing and producing pumps. We have put those years of expertize into providing a solutions portfolio that works across multiple applications. The PAS MF (medium flow) range is packed with features that not only meet, but exceed the needs of the market. We are focused on an efficient, extremely versatile pump that is suitable for many industries, including construction, general dewatering and emergency applications, such as flood clean up. Easy maintenance Without lifting devices: hinged cover for direct access to the impeller Diaphragm vacuum pump Oil free suitable for dry running: no contamination of the environment Wear plates Cast iron (G11 rubber lined) or stainless steel wear plates, that are easily replaceable Data sheet : 96 55 Atlas Copco 17 1
PAS 1MF 5 Performance curves Test according to UNI EN ISO 996 standard - level Test liquid: clean water, density 1, kg/m³ Spherical solids handling: D.5 mm (") H [ft] Priming time: s from 1,5 m (4.9 ft) Max absorbed power: 17, kw -.8 HP (. rpm) Recommended operating range H [m] 1 rpm 18 3 6% 65% 8 16 7% 65% 14 6% 4 1 m ft 1 33 8 5 6 16 rpm NPSHR 4 Q[m3/h] 1 Data sheet : 96 55 Atlas Copco 17 4 4 8 Q[l/min] 1 Q[USgpm] 8
PAS 1MF 5 Technical data Pump Qmax Hmax Q max eff. Eff. max Suction port Delivery port Impeller type Solids handling Material Casing Impeller Wear plates Number of plates Shaft Flushing Mechanical seal Elastomers G11 EN-GJL- cast iron EN-GJS-4 cast iron EN-GJL- rubber lined cast iron 39NiCrMo3 steel Yes Tungsten carbide / Tungsten carbide VITON PAS 1MF 5 5 m³/h - 4.17 l/min (1,1 USgpm) 36 m (118 ft) 18 m³/h - 3. l/min (8 USgpm) 7 % Flanged - DIN 1 Flanged - DIN 1 Semi-Open, vane 5 mm (. ") F11 EN-GJL- cast iron CF8M stainless steel CF8M stainless steel SAF 5 stainless steel Yes Tungsten carbide / Tungsten carbide VITON P11 EN-GJL- cast iron EN-GJS-4 cast iron EN-GJL- cast iron 39NiCrMo3 steel Yes Tungsten carbide / Tungsten carbide VITON Priming system Vacuum pump Vacuum pump type Nominal air capacity Max vacuum Separator type Separator material Drives V Diaphragm 5 m³/h (9.4 cfm),9 bar Superduo EN-GJL- cast iron Link belt Engines Make Type Displacement No. cylinders Cooling Rpm type Standard speed EU emissions US emissions Starting Starting voltage Oil change interval Market Speed [rpm] Consumption [l/h] Power [kw] Power [HP] 14 4,4 17,6 3.6 Kohler KDI 193M (KL17) Diesel direct injection, aspirated 1.861 cm³ (114 in³) 3 Liquid with radiator Variable. rpm /88/CE Stage 3A EPA Tier III Electric 1 V 5 h UE 16 18 5,1 5,4,3 1,6 7. 9 5,8 3 3.8 14 4, 16,7.4 Deutz D11L3I (ZD51) Diesel direct injection, aspirated.33 cm³ (14 in³) 3 Air Variable. rpm /88/CE Stage 3A EPA Tier III Electric 1 V 3 h UE 16 18 5 5,6 19,8,1 6.6 9.6 Control panel CP KDI 193M-54M Manual operation Digital hour meter Automatic engine shutdown in case of: - low oil pressure - water overheating - lack of battery charging (engine failure alarms with LED lights) Throttle rod Data sheet : 96 55 Atlas Copco 17 CP KL DEUTZ 1 Manual operation Hour meter Engine failure alarms with LED lights in case of: - low oil pressure - engine overheating - lack of battery charging Throttle rod 3 6, 4,3 3.6
PAS 1MF 5 Arrangements Technical data Material Coatings Color Features Battery Tank Locking keys S75JR EN 15- carbon steel Epoxy powder, average thickness of 8 µm Yellow and grey Atlas Copco (standard) Modular and demountable framework; hot dip galvanised steel support bases, bullbars and lifting beam. Mudguards with galvanised steel walkable surface. Tow bar, adjustable support feet. Lockable battery box. Fuel level indicator. Acid charge Pb-Ca maintenance free 1 V - 1 Ah - 4 A 3 l (79.3 USG) Fuel cap BLOCK PAS 1MF 995 x x 15 mm 39 x 8 x 6 ",585 m (1.9 ft) 865 kg (1,91 lb) 875 kg (1,93 lb) SKID1 PAS 1MF STACK PAS 1MF 995 x x 1565 mm 39 x 8 x 6 ",59 m (1.9 ft) 915 kg (, lb) 95 kg (,4 lb) Data sheet : 96 55 Atlas Copco 17 995 x x 163 mm 39 x 87 x 64 ",695 m (.3 ft) 975 kg (,15 lb) 985 kg (,17 lb) TRAILER PAS 1MF 141 x 35 x 188 mm 56 x 93 x 74 ",945 m (3.1 ft) 995 kg (,19 lb) 15 kg (, lb) 4 SKID PAS 1MF 17 x x 167 mm 4 x 87 x 66 ",735 m (.4 ft) 99 kg (,18 lb) 1 kg (, lb)
Powered by TCPDF (www.tcpdf.org) PAS 1MF 5 Arrangements CNP PAS 1MF 5 Material Coatings Color Features Battery Tank Drip pan Emergency stop Locking keys Noise level (KL17) 111 x 56 x 175 mm (44 x 11 x 67 ") S75JR EN 15- carbon steel Epoxy powder, average thickness of 8 µm Yellow and grey Atlas Copco (standard) Hot dip galvanised steel base; modular frame, stackable Acid charge Pb-Ca maintenance free, 1 V - 1 Ah - 4 A 4 l (111. USG) 46 l (1. USG) (11% of the total volume of the tank) Outside the canopy Control panel door and canopy doors,71 m (.3 ft) 16 kg (,78 lb) 63-68 db(a) @1 m (3 ft) Engines Make Type Displacement No. cylinders Cooling Rpm type Standard speed EU emissions US emissions Starting Starting voltage Oil change interval Market Speed [rpm] Consumption [l/h] Power [kw] Power [HP] 14 4,4 17,6 3.6 Kohler KDI 193M (KL17) Diesel direct injection, aspirated 1.861 cm³ (114 in³) 3 Liquid with radiator Variable. rpm /88/CE Stage 3A EPA Tier III Electric 1 V 5 h UE 16 18 5,1 5,4,3 1,6 7. 9 Control panel CP CNP 1 Manual operation, automatic operation (startstop with floats), emergency operation Hour meter Rev counter Battery voltmeter Fuel level indicator Vacuum gauge Emergency stop button Display with 6 languages Automatic engine shutdown in case of: - low oil pressure - water overheating - lack of battery charging (engine failure alarms with LED lights and display message) GSM communication module (optional) Throttle rod Specification is subject to change without prior notice. Please check with your local Atlas Copco representative for the latest specifications. Data sheet : 96 55 Atlas Copco 17 5 5,8 3 3.8
NOTES
Portable Energy Solutions Portfolio AIR COMPRESSORS READY TO GO 1-5 m³/min 7-1 bar VERSATILITY 7- m³/min 7- bar PRODUCTIVITY PARTNER 19-116 m³/min 1-345 bar GENERATORS Diesel and electric options available. PORTABLE 1,6-13,9 kva MOBILE 9-15* kva INDUSTRIAL 1-15* kva *Multiple configurations available to produce power for any size application. DEWATERING PUMPS ELECTRIC SUBMERSIBLE 75-16.5 l/min CENTRIFUGAL DIESEL DRIVEN 833-9833 l/min SMALL PORTABLE 1-5 l/min LIGHT TOWERS LED Committed to sustainable productivity Atlas Copco s Portable Energy division has a forward-thinking philosophy. For us, creating customer value is all about anticipating and exceeding your future needs while never compromising our environmental principles. Looking ahead and staying ahead is the only way we can ensure we are your long term partner. www.atlascopco.com METAL HALIDE ELECTRIC 96 55 17 Atlas Copco Portable Energy All rights reserved. Atlas Copco is a registered trademark of Atlas Copco AB Photos and illustrations contained herein might depict products with optional and/or extra components which are not included with the standard version of the product and, therefore, are not included in a purchase of such product unless the customer specifically purchases such optional/extra components. We reserve the right to change the specifications and design of products described in this literature without notice. Not all products are available in all markets.