BS 2,7-6,7 Steel Containers with Differential Pressure Valve for the CLEAN AGENT FS 49 C2 Extinguishing Agent FEATURES All components comply fully with international regulations for land and marine use. Approved according to SOLAS by a variety of shipping and offshore authorities. Tested and approved according to MSC/circ.848. Approved by a number of authorities for filling density up to 1,01 kg/litre and 52 bar. Allows functionary test without loss of extinguishing agent. The discharge valve 18-D series B04670000 has been subjected to extensive laboratory testing. Type approved by among others GL (Germanischer Lloyd) TECHNICAL CONTAINER DATA DATA SPECIFICATION NOTES Norm 1999/36/EEC (TPED) Pi ( ) marked Material 34CrMo4 Finish RAL 3000 Red Test Pressure 250 bar Approval By a Notified Body Outlet Connection 3/4 BSP Supplied With Cylinder Siphon tube, 20 mm Valve 18 D Safety Burst Disc,190 bar Filling Valve Pressure Switch Pressure Gauge, 0 100 bar Safety Outlet Plug CE approved and BAM tested Optional Actuators Electrical Pyrotechnical or Solenoid Valve Pneumatic Mechanical Single Pneumatic, Combined Pneumatic Hand Knob Release, Wire Pull device Combined release devices
RELEASE DEVICES AND ACCESSORIES Solenoid valve with adapter. Delivered with steel tube complete including adapters for connection between solenoid valve and pneumatic release device. Pre bent tube set for release of master container. Connecting Solenoid valve with the release device. Electrically operated pyrotechnical release plunger. Operates with all fire alarm and release cabinets Pneumatic Release Plunger operating with pressure from solenoid valve or pilot, slave or master cylinder. Strike Knob Release Device. Pull the safety ring and strike the knob to release the valve. Wire Release Device operated by pulling on wire. Pressure Switch to monitor the pressure in the container to avoid leakage of the extinguishing agent. Complete with o-ring and sintered metal filter. Pilot Release Hose. Stainless steel high pressure tube Complete including adapters. 2,7 BS2,7-18-D 1,9-2,7 102 450 575 5,8 4,0 BS4,0-18-D 2,8-4,0 116 515 640 6,4 6,7 BS6,7-18-D 4,0-6,7 140 570 700 10,0
t o t a l f i r e p r o t e c t i o n o n e s u p p l i e r BS 13,4-30 Steel Containers with Differential Pressure Valve for the CLEAN AGENT FS 49 C2 Extinguishing Agent FEATURES All components comply fully with international regulations for land and marine use. Approved according to SOLAS by a variety of shipping and offshore authorities. Tested and approved according to MSC/circ.848. Approved by a number of authorities for filling density up to 1,01 kg/litre and 52 bar. Allows functionary test without loss of extinguishing agent. The discharge valve 18-D series B04670000 has been subjected to extensive laboratory testing. Type approved by among others GL (Germanischer Lloyd) TECHNICAL CONTAINER DATA DATA SPECIFICATION NOTES Norm 1999/36/EEC (TPED) Pi ( ) marked Material 34CrMo4 Finish RAL 3000 Red Test Pressure 250 bar Approval By a Notified Body Outlet Connection 3/4 BSP Supplied With Cylinder Siphon tube, 20 mm Valve 18 D Safety Burst Disc,190 bar Filling Valve Pressure Switch Pressure Gauge, 0 100 bar Safety Outlet Plug CE approved and BAM tested Optional Actuators Electrical Pyrotechnical or Solenoid Valve Pneumatic Mechanical Single Pneumatic, Combined Pneumatic Hand Knob Release, Wire Pull device Combined release devices
t o t a l f i r e p r o t e c t i o n o n e s u p p l i e r RELEASE DEVICES AND ACCESSORIES, VALVE 18D Solenoid valve with adapter. Delivered with steel tube complete including adapters for connection between solenoid valve and pneumatic release device. Pre bent tube set for release of master container. Connecting Solenoid valve with the release device. Electrically operated pyrotechnical release plunger. Operates with all fire alarm and release cabinets Pneumatic Release Plunger operating with pressure from solenoid valve or pilot, slave or master cylinder. Strike Knob Release Device. Pull the safety ring and strike the knob to release the valve. Wire Release Device operated by pulling on wire. Pressure Switch to monitor the pressure in the container to avoid leakage of the extinguishing agent. Complete with o-ring and sintered metal filter. Pilot Release Hose. Stainless steel high pressure tube Complete including adapters. 13,4 BS13,4-18D 9-13,5 204 590 720 22,0 20 BS20-18D 14-20 204 800 930 29,0 30 BS30-18D 22-30 204 1150 1280 39,0
RELEASE DEVICES AND ACCESSORIES, VALVE B0431 Wire Release Device operated by pulling on wire. NOTE: Make sure that there is adequate slack on the wire when running wires through piping. See illustration left. Manual Release Device, pull handle to release. Pressure Switch to monitor the pressure in the container to avoid leakage of the extinguishing agent. Complete with o-ring and sintered metal filter. 13,4 BS13,4-B 0431 9-13,5 204 590 810 22,0 20 BS20,0-B 0431 14-20 204 800 1020 29,0 30 BS30-B 0431 21-30 204 1150 1370 39,0
BS 45,0-80,0 Steel Containers with Differential Pressure Valve for the CLEAN AGENT FS 49 C2 Extinguishing Agent FEATURES All components comply fully with international regulations for land and marine use. Approved according to SOLAS by a variety of shipping and offshore authorities. Tested and approved according to MSC/circ.848. Approved by a number of authorities for filling density up to 1,01 kg/litre and 52 bar. Allows functionary test without loss of extinguishing agent. The discharge valve 38-D series B04680000 has been subjected to extensive laboratory testing. Type approved by among others GL (Germanischer Lloyd) TECHNICAL CONTAINER DATA DATA SPECIFICATION NOTES Norm 1999/36/EEC (TPED) Pi ( ) marked Material 34CrMo4 Finish RAL 3000 Red Test Pressure 250 bar Approval By a Notified Body Outlet Connection 1 1/2 BSP Supplied With Cylinder Siphon tube, 38 mm Valve 38 D Safety Burst Disc,190 bar Filling Valve Pressure Switch Pressure Gauge, 0 100 bar Safety Outlet Plug CE approved and BAM tested Optional Actuators Electrical Pyrotechnical or Solenoid Valve Pneumatic Mechanical Single Pneumatic, Combined Pneumatic Hand Knob Release, Wire Pull device Combined release devices
RELEASE DEVICES AND ACCESSORIES Solenoid valve with adapter. Delivered with steel tube complete including adapters for connection between solenoid valve and pneumatic release device. Pre bent tube set for release of master container. Connecting Solenoid valve with the release device. Electrically operated pyrotechnical release plunger. Operates with all fire alarm and release cabinets Pneumatic Release Plunger operating with pressure from solenoid valve or pilot, slave or master cylinder. Strike Knob Release Device. Pull the safety ring and strike the knob to release the valve. Wire Release Device operated by pulling on wire. Pressure Switch to monitor the pressure in the container to avoid leakage of the extinguishing agent. Complete with o-ring and sintered metal filter. Pilot Release Hose. Stainless steel high pressure tube Complete including adapters. 45,0 BS45,0-38 D 30,0-45,0 267 1045 1220 52-58 67,5 BS67,5-38 D 45,0-68,0 267 1490 1665 69-76 80,0 BS80,0-38 D 68,0-80,0 267 1755 1930 97-102