PIPE HANDLING & HOISTING MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com
PIPE HANDLING & HOISTING TABLE OF CONTENTS PIPE HANDLING & HOISTING OVERVIEW... HOISTING PLUGS...-7 PIPE HANDLING & HOISTING...8- Pipe & PVC Elevators... 8 Casing Lifters... 9 Pipe Tongs... 9 Auger Hoisting Caps... 9 Lift Rings... 0 Hooks... 0 Kwik Klamps TM... TABLE OF CONTENTS WRENCHES...- Pipe Wrenches...- Chain Wrenches & Petol Tongs... Hole Products l
l Hole Products
PIPE HANDLING AND HOISTING PIPE HANDLING & HOISTING Hole Products offers a full range of pipe handling and hoisting equipment including hoisting plugs, pipe and casing elevators, casing lifters, pipe tongs, lift rings, slip rings, safety hooks, Kwik Klamps, and more. Pipe handling and hoisting equipment is available in a variety of sizes and styles to fit any project requirement. All pipe handling and hoisting equipment is constructed of top quality components, which provide superior reliability and help to ensure safe raising and lowering of drill tools. Please contact your Hole Products representative for detailed product information and availability of additional pipe handling and hoisting plugs. Products listed in the catalog are representative of the most common industry sizes and styles. Please contact your Hole Products representative for additional product offerings. Hole Products l
HOISTING PLUGS HOISTING PLUGS AW HOISTING PLUG AW BOX HOISTING PLUG CAPACITY SIZE ROTATING STATIC AW,00 lbs. /, kg 9,00 lbs. /, kg AW BOX HOISTING PLUG 00000 HOISTING PLUG ASSEMBLY 0000 NUT 000 BEARING ASSEMBLY 00060 BAIL 0000 SPINDLE ASSEMBLY NW HOISTING PLUG NW BOX HOISTING PLUG CAPACITY SIZE ROTATING STATIC NW,00 lbs. / 9,707 kg,600 lbs. / 9,777 kg 6 NW BOX HOISTING PLUG 00007 HOISTING PLUG ASSEMBLY 00070 NUT 0007 BEARING ASSEMBLY 00080 BAIL 000 SPINDLE ASSEMBLY 6 00090 LOCKING SET SCREW l Hole Products
HOISTING PLUGS AWJ HOISTING PLUG AWJ PIN HOISTING PLUG CAPACITY SIZE ROTATING STATIC AWJ,00 lbs. /, kg 9,00 lbs. /, kg AWJ PIN HOISTING PLUG 0000 HOISTING PLUG ASSEMBLY 0000 NUT 000 BEARING ASSEMBLY 00060 BAIL 0006 SPINDLE ASSEMBLY HOISTING PLUGS NWJ HOISTING PLUG NWJ PIN HOISTING PLUG CAPACITY SIZE ROTATING STATIC NWJ,00 lbs. / 9,707 kg,600 lbs. / 9,777 kg 6 NWJ PIN HOISTING PLUG 0000 HOISTING PLUG ASSEMBLY 00070 NUT 0007 BEARING ASSEMBLY 00080 BAIL 0008 SPINDLE ASSEMBLY 6 00090 LOCKING SET SCREW Hole Products l
HOISTING PLUGS HOISTING PLUGS NWL HOISTING PLUG 6 NWL PIN HOISTING PLUG CAPACITY SIZE ROTATING STATIC NWL,00 lbs. / 9,707 kg,600 lbs. / 9,777 kg NWL PIN HOISTING PLUG 00008 HOISTING PLUG ASSEMBLY 00070 NUT 0007 BEARING ASSEMBLY 00080 BAIL 0070 SPINDLE ASSEMBLY 6 00090 LOCKING SET SCREW HWL HOISTING PLUG HWL PIN HOISTING PLUG CAPACITY SIZE ROTATING STATIC HWL,00 lbs. / 9,707 kg,600 lbs. / 9,777 kg 6 HWL PIN HOISTING PLUG 0009 HOISTING PLUG ASSEMBLY 00070 NUT 0007 BEARING ASSEMBLY 00080 BAIL 007 SPINDLE ASSEMBLY 6 00090 LOCKING SET SCREW 6 l Hole Products
HOISTING PLUGS MURPHY FAST PLUG 6 7 8 9 0 MURPHY FAST PLUG CAPACITY DESCRIPTION LIFTING CAPACITY /8" BAIL,000 lbs. MURPHY FAST PLUG 0000 NWJ COMPLETE ASSEMBLY* 000 /8" IF COMPLETE* 000 /8" MHJR COMPLETE ASSEMBLY* 00 CASTELLATED NUT 000 WASHER BEARING 00 THRUST BEARING 000 BAIL 6 00 SHOULDER WASHER 7 000 SHANK 8 00 SAFETY SPRING ** 9 0060 PLUG 0 006 SLEEVE * Additional sizes and thread profi les are available. **Replace bad or worn safety spring to ensure safe operation. HOISTING PLUGS HOISTING PLUG HOISTING PLUG CAPACITY DESCRIPTION LD (LIGHT DUTY) HD (HEAVY DUTY) LIFTING CAPACITY NON-RATED 0,000-0,000 lbs. HOISTING PLUG DESCRIPTION 0000 /8" IF PIN LD SWIVEL 000 7/8" IF PIN LD SWIVEL 000 /" REG PIN LD SWIVEL HOISTING PLUG DESCRIPTION 0000 /8" IF PIN HD SWIVEL 0K 00009 /" REG PIN HD SWIVEL 0K 0000 /" FH PIN HD SWIVEL 0K 000 /" API BOX SWIVEL 0K Additional thread patterns are available. Hole Products l 7
PIPE ELEVATORS ELEVATORS Hole Products offers standard (SD) and heavy duty (HD) pipe elevators in a multiple sizes to fit a variety of project requirements. SD pipe elevators are commonly used for lifting threaded and coupled pipe. The pipe is elevated by lifting against the bottom side of the coupling. HD pipe elevators are commonly used for casing installation, setting well screens, and pulling pump columns. Additional sizes are available on request. PIPE ELEVATORS (SD) PIPE SIZE RATING 00000 " 6,000 lbs. 00000 /" 6,000 lbs. 0000 /" 6,000 lbs. 00000 " 6,000 lbs. PIPE ELEVATORS (HD) PIPE SIZE RATING 0000 " 6,000 lbs. 0000 /",000 lbs. 0000 /",000 lbs. 0000 " 8,000 lbs. PVC CASING ELEVATORS PVC casing elevators are a safe and efficient way to install bell end PVC well casing. All elevators are manufactured from /" steel and come equipped with high quality, zinc plated chains. PVC elevators are sold in pairs; one to hold the casing, and one to lift. Additional elevators for pipe sizes from /" 6" are available on request. PVC CASING ELEVATORS PIPE SIZE RATING 000070 ",000 lbs. 00007 ",000 lbs. 00007 ",000 lbs. 000078 6",000 lbs. 8 l Hole Products
CASING LIFTERS Hole Products offers casing lifters and replacement parts to fit 6" and 8" casing. Additional sizes are available on request. Casing lifters allow users to quickly elevate casing and simplify alignment during welding or coupling. The unique design makes pipe alignment easier during welding or threading applications. CASING LIFTERS DESCRIPTION 0000 6" COMPLETE 00006 8" COMPLETE 0000 6" OR 8" SET SCREW 00007 6" OR 8" ARM W/ SET SCREW 00000 6" BASE 0000 8" BASE LIFTERS, TONGS & HOISTING CAPS PIPE TONGS Pipe tongs are designed to grip pipe for hoisting and permit an automatic release of the pipe when the lift line is slacked off. All pipe tongs come equipped with field replaceable grip pads that provide safe and positive engagement of the pipe. Additional tongs for pipe sizes up to 6" are available on request. PIPE TONGS DESCRIPTION PIPE USE CAPACITY 00007 " TONGS.00" OD PIPE,000 lbs. 0000 6" TONGS.87" OD PIPE,000 lbs. 0000 7" TONGS 7.00" OD PIPE,000 lbs. 00000 8" TONGS 8.6" OD PIPE,00 lbs. 000098 0" TONGS 0.70" OD PIPE,000 lbs. AUGER HOISTING CAPS Hoisting caps are used to pull more than one continuous flight auger section at a time using the rig's main hoist. AUGER HOISTING CAPS IN HEX MM 0006 /8" 9 000 /8" 0007 " Hole Products l 9
LIFT RINGS LIFT RINGS & HOOKS Hole Products' lift rings are available in a variety of rod sizes, open and closed styles, and standard or long shank models. Lift rings are designed for removing drill rod from the hole. Using the rigs hoist, the ring is pulled upward, causing it to tilt and grab securely to the rod. LIFT RINGS OPEN AW BW N NW 0000 0000 00006 000 CLOSED AW BW N NW 00000 0000 0000 0000 LONG SHANK LIFT RINGS OPEN AW BW N NW 0000 ---- ---- ---- CLOSED AW BW N NW 000 ---- ---- ---- SELF-LOCKING SWIVEL HOOKS The self-locking swivel hook allows for swiveling and easy positioning. When placed under a load, the latch closes automatically and will not open. Repair kits are available for all self-locking swivel hooks. SELF LOCKING HOOKS Bronze Bushings (Swivel Eye Type) MODEL CABLE SIZE GRADE** WORKING LOAD LIMIT* (LB) at 90 6000 BKL /6-0 7/" 00,700 60000 BKL 7/8-0 9/" 00,00 6000 BKL 0-0 /8" 00 8,800 6000 BKL 0 /" 00,000 6000 BKL 6-0 /8" 00,600 *Design factor : Proof tested and certifi ed. **Grade 00 hooks have recessed trigger. SELF LOCKING LATCH REPAIR KIT Bronze Bushings (Swivel Eye Type) MODEL CHAIN SIZE GRADE 600 BKL /6-0 7/" 00 600 BKL 7/8-0 9/" 00 600 BKL 0-0 /8" 00 6000 BKL -0 /" 00 600 BKL 6-0 /8" 00 0 l Hole Products
KWIK KLAMPS TM Kwik Klamps TM are a time saving and safe tool designed for clamping and holding pipe. They are lightweight, easy to use, and provide excellent holding capability. The adjustable jaws allow for use with multiple pipe sizes and most have a safety pin to prevent accidental unclamping. KWIK KLAMP 9000 COMPLETE CLAMP - " TO " PIPE SIZE 900 ADJUSTABLE SCREW W/ NYLON WASHER 900 JAW SET 9007 SUPER JAW SET KWIK KLAMPS KWIK KLAMP 9000 COMPLETE CLAMP - /" TO " PIPE SIZE 900 ADJUSTABLE SCREW W/ NYLON WASHER 900 CARBIDE TIP GRIPPER - /8" - 6" x /" 9009 JAW SET W/BOLTS (Specially designed for holding " and /" pipe)* 9000 SPACER *Kwik Klamp can also hold " pipe with an additional jaw set and /" pipe with a set of spacers. (See fi g. & ) KWIK KLAMP 90006 COMPLETE CLAMP - 6" PVC PIPE ONLY* 90070 ADJUSTABLE SCREW W/ NYLON WASHER 9007 CARBIDE TIP GRIPPER - /8" - 6" x " 9000 CONVERSION KIT FOR " PIPE (0 Jaw pads & 0 Carbide Tipped Gripper Bolts) *Kwik Klamp can also hold " pipe with additional jaw set (conversion kit) (See fi g. & ). Hole Products l
STRAIGHT PIPE WRENCHES STRAIGHT PIPE WRENCHES Hole Products offers RIDGID pipe wrenches and replacement parts in all standard sizes. Additional wrenches are available. Please contact your Hole Products representative for details. Features Professional strength in lightweight aluminium. Offers the same durability and ease-of-use found in all RIDGID heavy-duty wrenches. ALUMINUM STRAIGHT PIPE WRENCHES NOMINAL SIZE PIPE CAPACITY 000 0" /" WEIGHT (LB) 000 " " / 000 " " / 00 8" /" / 00 " " 6 000 6" " 006 8" 6" 8 / Features Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self-cleaning threads with replaceable hook and heel jaws. Heavy-duty pipe wrenches comply with federal specifications GGG-W6IE, Type ll, Class A. STEEL STRAIGHT PIPE WRENCHES NOMINAL SIZE PIPE CAPACITY WEIGHT (LB) 000 0" /" / 00 " " / 00 " " / 006 8" /" / 00 " " 9 / 000 6" " 9 00 8" 6" / 000 60" 8" / l Hole Products
PIPE WRENCH REPLACEMENT PARTS Hole Products offers a full line of genuine RIDGID replacement parts including nuts, pins, heel jaw and pin assemblies, coil and flat spring assemblies, and jaw hooks. PIPE WRENCH REPLACEMENT PARTS NOMINAL SIZE HEEL JAW AND PIN JAW HOOK JAW PIN NUT COIL AND FLAT SPRING ASSEMBLY 0" 006 0088 006 09 070 " 006 0089 0 0 07 " 006 0090 00 0 080 8" 006 009 0 06 008 " 0070 000 060 00 08 6" 007 00 06 0 090 8" 0080 00 008 0 0076 60" 008 0 0086 00 000 PIPE WRENCH REPLACEMENT PARTS HEEL JAW AND PIN JAW HOOK JAW PIN NUT COIL AND FLAT SPRING ASSEMBLY Hole Products l
CHAIN WRENCHES Hole Products offers steel RIDGID chain wrenches and replacement chains in all standard sizes. CHAIN WRENCHES CHAIN WRENCHES MODEL # RATED PIPE CAP. ACTUAL O.D. CAP CHAIN LENGTH WEIGHT (lb) REPLACEMENT CHAIN 00 C- " " /" / 0 000 C- " " 8 /" / 0 00 C-8 /" " 0 /" 6 006 00 C- " " 0 /" 8 / 006 0060 C-6 /" 7 /" 9" / 006 Features A double fast jaw gives fast, ratchet-like action in either direction. The heavy-duty model has replaceable alloy steel jaws. The light-duty model has a one-piece forged alloy steel handle and jaw. Ideal for use in close quarters. PETOL TOOLS Hole Products is an authorized dealer of Petol Tools. We offer a complete range of Petol wrenches and equipment for use in various areas of the drilling industry. Additional Petol tools are available on request. Please contact your Hole Products representative for complete details. PETOL CHAIN TONGS O.D. GRIPPING WIDTH HANDLE LENGTH WEIGHT /" - 6".6" 0" 8 lbs. " - 0"." " lbs. PETOL DRILL PIPE TONGS " - 6".00" 8" lbs. /8" - "." " 7 lbs. /8" - "." " lbs. " - 8 /".00" 8" 0 lbs. " - 8 /".00" " lbs. " - 8 /".00" " lbs. /" - 0 /".88" 0" 9 lbs. /" - 0 /".88" 6" 7 lbs. " - " 7." 9" 9 lbs. " - " 7." 8" 0 lbs. " - " 7." " lbs. " - " 7." 8" lbs. " - " 7." 6" 9 lbs. l Hole Products