BELT CONVEYORS
BELT CONVEYORS Belt conveyors are intended for transport of loose materials. They meet requirements for use in gassy coal-mines with danger of methane and coal dust explosion. Belt width from 0.8 to 1.6 m Capacity up to 6000 t/h Installed power up to 4 x 500 kw Speed from 1.25 to 5,00 m/s Steel, rubber or ceramic driving drum lagging Electric or electro-pneumatic brake control system Eletric Equipment Gradual (soft start) starting and stopping Temperature sensor of motors, gearboxes and pulleys Transfer point blocking sensor Emergency stop system (blocking rope) and others safety elements Communication and visual system
BELT CONVEYORS Transport capacity (ton per hour) Belt width (m) 0,8 1 1,2 1,4 1,6 Belt speed (m/s) 1,25 320 500 1,60 410 650 1300 1760 2,00 520 800 1620 2200 2870 2,50 650 1010 2020 2730 3590 3,15 810 1270 2560 3480 4520 3,70 960 1490 2990 4080 5310 4,00 1610 3230 4410 5740 5,00 3990 5510 7180
BELT CONVEYORS DRIVING STATION Number of motors - 1, 2, 3, 4 Electromotor power output - 30, 55, 100, 160, 250, 400, 500 kw One or two-speed gearboxes Back-stops and brakes 1 Driving drum 2 Electromotor 3 Clutch 4 Brake 5 Gearbox
BELT CONVEYORS PULLEYS (head, drive, discharge, tail) Steel Rubber-coated, pattern is available Ceramic lagging Shell thickness up to 20 mm Flat (cylindrical) and crowned shape
BELT CONVEYORS CONVEYOR STRUCTURE AND IDLERS Type floor mounted or hung (chains) Connections bolts or pins Rollers diameter - 89, 108, 133, 159 mm Idlers can be zinc-coated.
BELT CONVEYORS BELT TAKE-UP DEVICE With pneumatic cylinders Gravity Electric or hydraulic constant tension winch Belt storage system up to 200 m
BELT CONVEYORS IMPACT BED AND RECEIVING ARRANGEMENT (hopper)
BELT CONVEYORS LATERAL TRANSFER CHUTE AND ACCESSORIES LATERAL TRANSFER POINT Chute Tray system TR Hopper TRIPPER
BELT CONVEYORS PERSONNEL TRANSPORT BELT TOWING EQUIPMENT PVL 2
MINING MACHINES DIVISION PLOW SYSTEMS OSTROJ a.s., Mining Machines Division Tesinska 1586/66, Opava 746 41, Czech Republic Phone: +420 553 872 232, Fax: +420 553 872 241, E-mail: miningmachines@ostroj.cz
PLOW SYSTEMS PL 630 / PL 730
PLOW SYSTEMS PL 738 V PLOW SYSTEMS PL 838 K
TECHNICAL SPECIFICATION
ROOF SUPPORT OSTROJ 065/14 BASIC CHARACTERISTICS Roof support OSTROJ 07/21 is intended for the support of extracted areas of longwall faces by mining in low to mediumthickness coal seams. Roof supports are designed for operation either in shearer or in plow system longwalls and may be equipped with various modifications of base frames, canopies, hydraulic legs, control systems or other support accessories used in inclined seams and seams prone to rock bursts. Each roof support is designed to suit customer requirements. Min. closed height 650 mm Min. operating height 850 mm Max. extended height 1 400 mm Max. inclination along the face 25 degrees Max. inclination in direction of advance +15/-15 degrees Support center 1 750 mm Leg inner diameter 250 mm Leg load capacity 2 258 kn Support load capacity 3 207-3 873 kn Shield advance force 297 kn Conveyor push force 161 kn Support density 668 kn/m 2
ROOF SUPPORT OSTROJ 70/125T BASIC CHARACTERISTICS Roof support OSTROJ 70/125 is intended for the support of extracted areas of longwall faces by mining in low to mediumthickness coal seams. Roof supports are designed for operation either in shearer or in plow system longwalls and may be equipped with various modifications of base frames, canopies, hydraulic legs, control systems or other support accessories used in inclined seams and seams prone to rock bursts. Each roof support is designed to suit customer requirements. Min. closed height 700 mm Min. operating height 800 mm Max. extended height 1 250 mm Max. inclination along the face 17 degrees Max. inclination in direction of advance +25/-25 degrees Support center 1 500 mm Leg inner diameter 250 mm Leg load capacity 2 111 kn Support load capacity 2 747 3 705 kn Shield advance force 416 kn Conveyor push force 227 kn Support density / resistance 556 kn/m 2
ROOF SUPPORT OSTROJ 07/16 BASIC CHARACTERISTICS Roof support OSTROJ 07/16 is intended for the support of extracted areas of longwall faces by mining in low to mediumthickness coal seams. Roof supports are designed for operation either in shearer or in plow system longwalls and may be equipped with various modifications of base frames, canopies, hydraulic legs, control systems or other support accessories used in inclined seams and seams prone to rock bursts. Each roof support is designed to suit customer requirements. Min. closed height 700 mm Min. operating height 900 mm Max. extended height 1 600 mm Max. inclination allong the face 25 degrees Max. inclination in direction of advance +20/-20 degrees Support center 1 500 mm Leg inner diameter 220 mm Leg load capacity 1 596 kn Support load capacity 3 139 kn Shield advance force 232 kn Conveyor push force 161 kn Support density 648 kn/m 2
ROOF SUPPORT OSTROJ 07/21 BASIC CHARACTERISTICS Roof support OSTROJ 07/21 is intended for the support of extracted areas of longwall faces by mining in low to mediumthickness coal seams. Roof supports are designed for operation either in shearer or in plow system longwalls and may be equipped with various modifications of base frames, canopies, hydraulic legs, control systems or other support accessories used in inclined seams and seams prone to rock bursts. Each roof support is designed to suit customer requirements. Min. closed height 700 mm Min. operating height 1 000 mm Max. extended height 2 100 mm Max. inclination along the face 30 degrees Max. inclination in direction of advance +25/-25 degrees Support center 1 500 mm Leg inner diameter 225 mm Leg load capacity 1 789 kn Support load capacity 2 876 kn Shield advance force 230 kn Conveyor push force 160 kn Support density 709 kn/m 2
ROOF SUPPORT OSTROJ 11/30 BASIC CHARACTERISTICS The design of the roof support OSTROJ 11/30 is intended for the support of extracted areas of longwall faces by using the AFC and the shearer running and guided by this AFC. Roof supports may be equipped with various modifications of base frames, canopies, hydraulic legs, control systems or other support accessories used in inclined seams and seams prone to rock bursts. Each roof support is designed to suit customer requirements. Min. closed height 1 100 mm Min. operating height 1 300 mm Max. extended height 3 000 mm Max. inclination along the face 45 degrees Max. inclination in direction of advance +15/-15 degrees Support center 1 500 mm Leg inner diameter 220 mm Leg load capacity 1 521 kn Support load capacity 2 964 kn Shield advance force 304 kn Conveyor push force 181 kn Support density 637 kn/m 2
ROOF SUPPORT OSTROJ 12/32 BASIC CHARACTERISTICS Roof support OSTROJ 12/32, falls within the range marked,, HEAVY DUTY as a result of long-term development and equipment manufacturing with the use of our own knowhow and with the emphasis especially put on safety and reliability. Roof supports of this type are designed to operate in tough mining and geological conditions including seams prone to rock bursts. Each roof support is designed to suit customer requirements. Min. closed height 1 200 mm Min. operating height 1 400 mm Max. extended height 3 200 mm Max. inclination along the face 25 degrees Max. inclination in direction of advance +15/-15 degress Support center 1 500 / 1 750 mm Leg inner diameter 320 / 400 mm Leg load capacity 3 217 / 4 524 kn Support load capacity 6 073 / 8 538 kn Shield advance force 643 kn Conveyor push force 281 kn Support density 976 / 1 373 kn/m 2
ROOF SUPPORT OSTROJ 14/32 BASIC CHARACTERISTICS Roof support OSTROJ 14/32 is intended for the support of extracted areas of longwall faces by mining in mediumthickness coal seams. Roof supports of this type are designed to operate in specific mining and tough geological conditions including seams prone to rock bursts. It is always possible to supply various alternatives of high range and support capacities to suit customer requirements. The range of accessories is designed for roof support including base extenders to extend the support high range. Min. closed height 1 400 mm Min. operating height 1 700 mm Max. extended height 3 200 mm Max. inclination along the face 25 degrees Max. inclination in direction of advance +15/-15 degrees Support center 1 500 mm Leg inner diameter 225 mm Leg load capacity 1 788 kn Support load capacity 3 582 kn Shield advance force 425 kn Conveyor push force 198 kn Support density 576 kn/m 2
ROOF SUPPORT OSTROJ 17/37 BASIC CHARACTERISTICS Roof support OSTROJ 14/32 is intended for the support of extracted areas of longwall faces by mining in mediumthickness coal seams. Roof supports of this type are designed to operate in specific mining and tough geological conditions including seams prone to rock bursts. It is always possible to supply various alternatives of high range and support capacities to suit customer requirements. The range of accessories is designed for roof support including base extenders to extend the support high range. Min. closed height 1 700 mm Min. operating height 2 000 mm Max. extended height 3 700 mm Max. inclination along the face 25 degrees Max. inclination in direction of advance +15/-15 degrees Support center 1 500 mm Leg inner diameter 225 mm Leg load capacity 1 788 kn Support load capacity 3 560 kn Shield advance force 425 kn Conveyor push force 198 kn Support density 660 kn/m 2
ROOF SUPPORT OSTROJ 17/37HD BASIC CHARACTERISTICS Roof support OSTROJ 17/37HD is a type of roof support range marked as HEAVY DUTY. The up-to-date knowledge from roof support operation in heaviest mining conditions were taken into account by developing. The best materials are used by manufacturing in order to accomplish maximum operator safety. This type of roof support is intended for the support of extracted areas of longwall faces by shearer mining in flat medium-thickness coal seams including seams prone to rock bursts. Each roof support is designed to suit customer requirements. Min. closed height 1 700 mm Min. operating height 2 000 mm Max. extended height 3 700 mm Max. inclination along the face 25 degrees Max. inclination in direction of advance +15/-15 degrees Support center 1 750 mm Leg inner diameter 400 mm Leg load capacity 4 524 kn Support load capacity 9 068 kn Shield advance force 565 kn Conveyor push force 203 kn Support density 1 209 kn/ m 2
ROOF SUPPORT OSTROJ 22/46 BASIC CHARACTERISTICS Roof support OSTROJ 14/32 is intended for the support of extracted areas of longwall faces by mining in mediumthickness coal seams. Roof supports of this type are designed to operate in specific mining and tough geological conditions including seams prone to rock bursts. It is always possible to supply various alternatives of high range and support capacities to suit customer requirements. The range of accessories is designed for roof support including base extenders to extend the support high range. Min. closed height 2 200 mm Min. operating height 2 500 mm Max. extended height 4 600 mm Max. inclination along the face 25 degrees Max. inclination in direction of advance +20/-15 degrees Support center 1 500 mm Leg inner diameter 320 mm Leg load capacity 2 610 kn Support load capacity 5 220 kn Shield advance force 398 kn Conveyor push force 186 kn Support density 800 kn/m 2
ROOF SUPPORT OSTROJ 24/50 BASIC CHARACTERISTICS Roof support OSTROJ 24/50 is intended for the support of extracted areas of longwall faces by mining in medium-thickness coal seams. Roof supports of this type are designed to operate in specific mining and tough geological conditions including seams prone to rock bursts. It is always possible to supply various alternatives of high range and support capacities to suit customer requirements. The range of accessories is designed for roof support including base extenders to extend the support high range. Min. closed height 2 400 mm Min. operating height 2 600 mm Max. extended height 5 000 mm Max. inclination along the face 25 o Max. inclination in direction of advance +20/-20 o Support center 1 750 mm Leg inner diameter 400 mm Leg load capacity 4 524 kn Support load capacity 9 046 kn Shield advance force 565,5 kn Conveyor push force 314 kn Support density 1 065 kn/m 2
ROOF SUPPORT OSTROJ 26/56 BASIC CHARACTERISTICS Roof support OSTROJ 26/56 is designed for roof support of high thickness seams. Roof support is intended to operate in tough mining and geological conditions including seams requiring special equipment for impact protection. Typical designs of roof support high range are given in technical specifications shown in this leaflet. It is always possible to supply various alternatives of high range and support capacities to suit customer requirements. Min. closed height 2 600 mm Min. operating height 2 900 mm Max. extended height 5 600 mm Max. inclination along the face 25 degrees Max. inclination in direction of advance +10/-20 degrees Support center 1 500 mm Leg inner diameter 320 mm Leg load capacity 3 999 kn Support load capacity 7 400 kn Shield advance force 643 kn Conveyor push force 281 kn Support density 1 165 kn/m 2
ROOF SUPPORT OSTROJ MV 4 BASIC CHARACTERISTICS Roof support OSTROJ MV 4 is intended for the support of extracted areas of longwall faces with shearer extraction of flat or steep coal seams. For these stated conditions the roof support may be adjusted for operating with armoured face conveyor in flat lying seam with the inclination up to 45 degrees or without armoured face conveyor in steep seams with the inclination greater than 45 degrees. Min. closed height 650 mm Min. operating height 800 mm Max. extended height 1 800 mm Max. inclination along the face 110 degrees Support center 1 200 mm Leg inner diameter 110 mm Leg load capacity 352 kn Support load capacity 704 kn Shield advance force 204 kn Support density 260 kn/m 2
ROOF SUPPORT OSTROJ MV 4 095/22 BASIC CHARACTERISTICS Roof support OSTROJ MV 4 095/22 is intended for the support of extracted areas of longwall faces with shearer extraction of steep coal seams. For conditions up to 40 the roof support must be adjusted with special equipment for work with armoured face conveyor and without armoured face conveyor in steep seams with the inclination greater than 40 degrees. Min. closed height 950 mm Min. operating height 1 100 mm Max. extended height 2 200 mm Min. inclination along the face 40 degrees Max. inclination along the face 110 degrees Support center 1 200 mm Leg inner diameter 130 mm Leg load capacity 477 kn Support load capacity 953-957 kn Shield advance force 379 kn Support density 280 kn/m 2
ROOF SUPPORT OSTROJ MV 4 095/22 BASIC CHARACTERISTICS Roof support OSTROJ MV 4 095/22 is intended for the support of extracted areas of longwall faces with shearer extraction of steep coal seams. For conditions up to 40 the roof support must be adjusted with special equipment for work with armoured face conveyor and without armoured face conveyor in steep seams with the inclination greater than 40 degrees. Min. closed height 950 mm Min. operating height 1 100 mm Max. extended height 2 200 mm Min. inclination along the face 40 degrees Max. inclination along the face 10 degrees Support center 1 200 mm Leg inner diameter 130 mm Leg load capacity 477 kn Support load capacity 953-957 kn Shield advance force 379 kn Support density 280 kn/m 2