erial General Description of Y, 8, 110, 16, 200, 0, 0, 30 and mm mounting widths are available. Y vailable angles are from 0 to 7 in increments of. Y Gas spring can be removed from the cam whilst in the die/press. Y Complying with VDI- specification. q/8/110 Structure and ssembly / Disassembly :!4 8 :!0 110:!1 1637 q Specifications Mounting Surface Working ngle Travel width height 00 19.3 0 21.3 10 23.3 1.4 20 27.6.0 32.6 2 3 3.4 40 38.6 4 42.3 0 46.7 2.3.0 00 19.3 0 21.3 10 23.3 1.4 20 27.6.0 32.6 8 2 3 3.4 40 38.6 4 42.3 0 46.7 2.3.0 0.0 4.3 110 27 3 9.0 4 70.4 0 77.8 87.2 100.0 70 81.9 7 108.2 kn(tonf) 7 (7.6) 100 (10.2) 10 (1.3) Mounting Surface Working ngle Travel width height 0.0 4.3 16 0 3 9.0 4 70.4 0 77.8 61.0 40.0 6 47.3 7 8.0 0.0 4.3 200 0 3 9.0 4 70.4 0 77.8 2.3.0 0.0 4.3 0 0 3 9.0 4 70.4 0 77.8 2.3.0 kn(tonf) 171 (17.) 218 (22.2) 284 (29.0) Mounting Surface Working ngle Travel width height 00 38.6 0 42.6 10 46.7 1 0.9 20.3.0 6.1 0 37 3 70.8 40 77.1 4 84. 0 93.3 104.6 120.0 70 73.1 7 96.6 30 37 37 00 38.6 0 42.6 10 46.7 1 0.9 20.3.0 6.1 3 70.8 40 77.1 4 84. 0 93.3 87.2 90.0 70 87.7 7 96.6 00 38.6 0 42.6 10 46.7 1 0.9 20.3.0 6.1 3 70.8 40 77.1 4 84. 0 93.3 104.6 120.0 70 73.1 7 96.6 kn(tonf) 364 (37.1) 40 (41.3) 40 (4.9) w :!8 8 :!4 110:!6 UDisassembly method of / 8 / 110 1) Remove hexagon socket head bolt ( a ) and stopper plate (:!8, 8:!4, 110:!6). 2) Remove cam slider (w) from cam holder (:!4, 8:!0, 110:!1) at rear of cam. Ussembly method of / 8 / 110 1) ssemble components in the reverse order to which they were removed. YMake sure that there is no foreign matter on the slide surfaces before assembly. YThe clearance between the cam slider and the cam holder is carefully controlled. Check that the serial number stamped on both parts is the same. YPlease ensure that all bolts removed are re-installed and tightened. a 1638
erial General Description of q16/200/0/0/30/ Structure and ssembly / Disassembly q/8/110 Removing gas spring t 16:@0 200n:!7!4 a C Remove the screws of the spring stopper Slide out the spring stopper Remove the gas spring backward C @1 q16/200/0/0/30/ Removing gas spring C D UDisassembly method of 16 / 200 / 0 / 0 / 30 / 1) Remove safety plate (16:@0, 200n:!7). 2) Remove hexagon socket head bolt ( a ) and stopper plate(!4). 3) Remove cam slider (@1) from cam holder (t) at rear of cam. -Screwthe mounting lever -Remove the screws of the spring stopper Slide out the spring stopper C Remove the gas spring backward D Ussembly method of 16 / 200 / 0 / 0 / 1) ssemble components in the reverse order to which they were removed. YMake sure that there is no foreign matter on the slide surfaces before assembly. YThe clearance between the cam slider and the cam holder is carefully controlled. Check that the serial number stamped on both parts is the same. YPlease ensure that all bolts removed are re-installed and tightened. 1639 1640
170 erial (00 n4 ) 37a0. a0.1 4 G 200a0.0 C 0 17 210 t @3 @6 @7 C Ca0.1 180a0.0 a0.0 Ja0.02 @0!9!8!!4!7 30a0.1 a0.0 0a0.02 q 6a0.0 11a0.0 Ha0.0 10a0.02 17 2a0.0 2-h20H7 #7 17a0.0 4-h22-h32 2-h20H7 @1 4-h22-h32 27a0.02 30 6a0.0 E F 1 #0 u @2 $2!0oy @8 @4 (W)!3!0o Travel C E F G H J 00 38.6 39.00 237.00 18 88.00 287.00 116.0 0 42.6 387.1 232.1 1 94.19 280.81 126.4 10 46.7 394.13 249.13 14 106.86 268.14 133.0 390 340 1 0.9 39.82 2.82 13 118.01 6.99 142.1 20.3 397.08 297.08 100 131.9 243.41 149.7 404.71 319.71 8 138.6 23 164. 6.1 408.22 343.22 6 146.89 228.11 178.7 3 70.8 404.2 34.2 0 19.17 21.83 189.2 30 40 77.1.46 3.46 40 167. 207.70 204.1 4 84. 394.84 374.84 20 179.24 19.76 21.2 kn Mark Code NF 40 Without gas spring but accessories for installation of each type are included. Catalog No. (W) PS qspring Specification (Qty 3) Spring Type Spring Force N(kgf) PS Initial Force Final Force Model 323 (3298.) X70-080-TD (LLER) GD 00n4 o 3100 (3168.4) U.0800.080.TO (DDCO) GS 32963 (3363.6) SFC.70.80 (SDT) Option Specification Dedicated key is attached. (It is not assembled to the main unit) Nitrogen gas is not charged. pplicable to, GS and GD only. Return Force N(kgf) Catalog No. (W) 44337 (424.1) 00 44248 (41.1) 0 4414 (40.) 10 440 (449.4) 1 4391 (4484.8) 20 43844 (4473.9) 43734 (4462.6) 43621 (441.2) 3 4308 (4439.6) 40 4339 (4428.0) 4 ー ー ー NF YParts list is shown in p.1711 YCam diagram is shown in p.1709 Y NF : Gas Springs are not filled with nitrogen gas if delivery is by air freight. Spring Type PS GS GD NGP q ey Specification o0.01 o0.03 0 9 14 (with M8p1 bolt) 2 h9 h14 1706
erial (0 n7 ) 410a0.0 180a0.0 4-h22-h32 2-h20H7 Travel C E F G S 0 93.3 393.3 391.3 2 196.04 178.96 198.3 104.6 392.76 40.76 o13 221.83 13.17 193. 120.0 393.3 423.3 o 249.61 1.39 186.4 387.48 43.48 o48 266.49 108.1 189.7 40 70 73.1 378.6 443.6 o6 281.99 93.01 193.8 7 96.6 364.72 449.72 o8 296.88 78.12 197.7 37a0. 4 G a0.1 200a0.0 C C @0!9!8 Ca0.1!!4 30a0.1 0 a0.0 3a0.02 0a0.02 a0.0 t @3 @6 @7 S!7 q #7 17 10a0.02 4-h22-h32 210 17a0.0 @1 27a0.02 F E 6a0.0 30 #0 @8 1 u!0oy @2 $2 @4 (W)!0o!3 kn Mark Code NF 40 Without gas spring but accessories for installation of each type are included. Catalog No. (W) PS qspring Specification (Qty 3) Spring Type Spring Force N(kgf) PS Initial Force Final Force Model 323 (3298.) X70-080-TD (LLER) GD 0n o 3100 (3168.4) U.0800.080.TO (DDCO) GS 32963 (3363.6) SFC.70.80 (SDT) 81 (3120.) X70-063-TD (LLER) GD 6 o 34080 (3477.6) U.0800.063.TO (DDCO) GS 3137 (3199.7) SFC.70.63 (SDT) 28800 (2938.8) X70-00-TD (LLER) GD 70Y7 o 28020 (289.2) U.0800.00.TO (DDCO) GS 2947 (07.7) SFC.70.0 (SDT) Option Return Force N(kgf) Catalog No. (W) 43282 (4416.) 0 47074 (4803.4) 2028 (8.9) 793 (693.1) 6 617 (618.4) 70 712 (7399.2) 7 Specification Dedicated key is attached. (It is not assembled to the main unit) Nitrogen gas is not charged. pplicable to, GS and GD only. YParts list is shown in p.1711 YCam diagram is shown in p.1709 Y NF : Gas Springs are not filled with nitrogen gas if delivery is by air freight. Spring Type PS GS GD NGP q ey Specification o0.01 o0.03 0 9 14 2 h9 h14 6a0.0 2-h20H7 11a0.0 2a0.0 ー ー ー NF (with M8p1 bolt) 1707 1708
1 10 erial Cam Diagram 00 0 10 6 70 40 0 4 70 38.6 1 20 7.3 20 3 40 20 6.1 6.1 70.8 3 77.1 40 4 0 84. 6 46 46.1 46.7 42.6 40 120 46.7 10 3 0.9 47.6 1 4 93.3 71. 0 104.6 8.7 3.1 48.9 0.7 103.9 94.6 6 8.8 73.1 68.7 7 96.6 93.3 1709 1710
erial Table of Components qkm00 n7 No. Description Qty Material and Remark q Cam Driver 1 GGG t Cam Holder 1 GGG y ase Plate R 1 S4C u Slide Plate(VSM-1) 2 ronze with Graphite o ey 2 SS!0 ey 4 SS!3 ase Plate L 1 S4C!4 Stopper Plate 1 S4C! Stopper 4 Urethane(PCU20)!7 Safty Plate 2 S4C!8 Lock lock 1 SS!9 Hexagonal olt 1 SCM43 M16p10 @0 Hexagonal Nut 1 SCM43 M16 @1 Cam Slider 1 GGG @2 Spring Guide 1 S4C @3 Gas Spring Guide Plate 1 S4C @4 Slide Plate(VSM-14) 2 ronze with Graphite @6 Slide Plate(VSM-31) 2 ronze with Graphite @7 Slide Plate(VSM-34) 2 ronze with Graphite @8 Slide Plate(VSM-) 4 ronze with Graphite #0 Positive Return Plate 2 S4C #7 Cam Slide Guide(Lower) 1 S4C $2 Gas Spring 3 Refer to the specification table olts for assembly are not indicated. 1711 1712