Automotive Data Solutions Inc. INSTALL GUIDE BLADE-AL(DL)-HA2-EN AVAILABLE FOR : ADS-BLADE AL Rev. Date: December 27, 2017 Doc. No.: ##46762## HA2 U.S. PATENT NO. 8,856,780 PLEASE VISIT WWW.IDATALINK.COM FOR COMPLETE PRODUCT DETAILS The brand names and logos found in this guide are property of their respective owners. Automotive Data Solutions Inc. 2017 TERMS OF USE: automotive data Solutions Inc. ( ads ) products are strictly intended for installation by certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ads product in a vehicle, it is the certified Technician s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink. ads is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ads reserves itself the right to suspend any Weblink account without notice and decline to offer technical support to noncertified Technicians, non-compliant certified Technicians or end users.
Page 2 of 11 BLADE-AL(DL)-HA2-EN Doc. No.: ##46762## 20171227 INSTALL TYPE SELECTION FeATUReS MAKe MoDel NOTE I WARNING: This solution does NOT cover hybrid vehicles with a manual transmission. Do not, under any circumstances, attempt to install. YeAR install TYPe DATA immobilizer BYPASS ARM oem AlARM DiSARM oem AlARM A/M AlARM CTRl FRoM oem ReMoTeS A/M RS CTRl FRoM oem ReMoTeS AUToliGHT CTRl* DooR lock DooR UnloCK TRUnK/HATCH ReleASe PoWeR liftgate DooR STATUS output TRUnK STATUS output HooD STATUS output CSX AT/MT 06-11 3 MDX AT 07-13 2 RDX AT 07-12 3 Civic AT/MT 06-11 3 Civic Hybrid AT 06-11 3 CR-V AT/MT 07-11 3 CR-Z AT 11-16 3 Fit AT/MT 09-13 1 Insight AT 10-14 1 *This feature will unlock then lock the vehicle s doors on RS shutdown. To turn it off, deactivate the RAP shutdown. (See module navigation chart) Use traditional hardwired installation method for feature to be functional during remote start. ACURA HonDA
Page 3 of 11 BLADE-AL(DL)-HA2-EN Doc. No.: ##46762## 20171227 WARNING: READ CAREFULLY IMPORTANT I II III Ground When Running from Remote Starter must be provided BEFORE Ignition. Failure to comply may result in immobilizer bypass malfunction during remote start. If Ground When Running from Remote Starter CAN T be provided BEFORE Ignition, use a separate TB-HA for immobilizer bypass ONLY. - DO NOT program unlock before start on the Remote Starter. - DO NOT change Remote Starter OEM alarm control default settings. Failure to comply may result in product malfunction.
Page 4 of 11 BLADE-AL(DL)-HA2-EN Doc. No.: ##46762## 20171227 TYPE 1 - WIRE CROSS REFERENCE CHART MAKe MoDel HonDA YeAR DeSCRiPTion name TYPe PoSiTion PolARiTY MoDUle location CoMPonenT locator Fit AT/MT Insight AT 09-13 10-14 Ignition ~ Green 07 pin 02 Red (+) Ignition switch ~ Key Data ~ Green 07 pin 03 Green (DATA) Ignition switch ~ SWC ~ Green 07 pin 04 LtGreen (DATA) Ignition switch ~ Ignition ~ Green 07 pin 02 Red (+) Ignition switch ~ Key Data ~ Green 07 pin 03 LtGreen (DATA) Ignition switch ~ SWC ~ Green 07 pin 04 Green (DATA) Ignition switch ~
Page 5 of 11 BLADE-AL(DL)-HA2-EN Doc. No.: ##46762## 20171227 TYPE 1 - WIRING DIAGRAM STANDARD 12 VOLT, GROUND AND IGNITION SWITCH CONNECTIONS ARE STILL REQUIRED FROM THE REMOTE STARTER. REMOTE STARTER WHITE/RED WHITE PINK/BLACK BROWN/RED ORANGE/BLACK ORANGE BLUE/RED GREEN/RED *BLADE CONNECTOR EXACT PIN-OUT GRAY/RED 10 20 09 19 08 18 07 17 06 16 05 15 04 14 03 13 02 12 01 11 WHITE/BLACK PINK BLACK BROWN/YELLOW ORANGE/WHITE BLUE/YELLOW YELLOW GRAY/YELLOW WHITE/BLACK - IGNITION (+) CONNECTOR SIDE WHITE/RED - IGNITION (+) VEHICLE SIDE WHITE (NC) YELLOW (NC) BROWN/RED (NC) BROWN/YELLOW (NC) ORANGE/BLACK - KEY DATA ORANGE/WHITE (NC) ORANGE - SWC PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED (NC) GRAY/RED (NC) GRAY/YELLOW (NC) BLACK (NC) KEY DATA SWC 1 2 3 4 5 6 7 IGNITION (+)
Page 6 of 11 BLADE-AL(DL)-HA2-EN Doc. No.: ##46762## 20171227 TYPE 2 - WIRE CROSS REFERENCE CHART MAKe MoDel YeAR DeSCRiPTion name ACURA TYPe PoSiTion PolARiTY MoDUle location CoMPonenT locator MDX AT 07-13 Ignition ~ White 07 pin 02 Brown (+) At immobilizer ~ Key Data ~ White 07 pin 03 LtGreen (DATA) At immobilizer ~ SWC ~ White 07 pin 04 LtGreen (DATA) At immobilizer ~
Page 7 of 11 BLADE-AL(DL)-HA2-EN Doc. No.: ##46762## 20171227 TYPE 2 - WIRING DIAGRAM STANDARD 12 VOLT, GROUND AND IGNITION SWITCH CONNECTIONS ARE STILL REQUIRED FROM THE REMOTE STARTER. REMOTE STARTER WHITE/RED WHITE PINK/BLACK BROWN/RED ORANGE/BLACK ORANGE BLUE/RED GREEN/RED *BLADE CONNECTOR EXACT PIN-OUT GRAY/RED 10 20 09 19 08 18 07 17 06 16 05 15 04 14 03 13 02 12 01 11 WHITE/BLACK PINK BLACK BROWN/YELLOW ORANGE/WHITE BLUE/YELLOW YELLOW GRAY/YELLOW WHITE/BLACK - IGNITION (+) CONNECTOR SIDE WHITE/RED - IGNITION (+) VEHICLE SIDE WHITE (NC) YELLOW (NC) BROWN/RED (NC) BROWN/YELLOW (NC) ORANGE/BLACK - KEY DATA ORANGE/WHITE (NC) ORANGE - SWC PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED (NC) GRAY/RED (NC) GRAY/YELLOW (NC) BLACK (NC) KEY DATA SWC 1 2 3 4 5 6 7 IGNITION (+)
Page 8 of 11 BLADE-AL(DL)-HA2-EN Doc. No.: ##46762## 20171227 TYPE 3 - WIRE CROSS REFERENCE CHART MAKe MoDel YeAR DeSCRiPTion name ACURA TYPe PoSiTion HonDA PolARiTY MoDUle location CoMPonenT locator RDX AT CSX AT/MT Civic AT/MT Civic Hybrid AT CR-V AT/MT CR-Z AT 07-12 06-11 06-11 06-11 07-11 11-16 Ignition ~ White 07 pin 02 Yellow (+) Ignition switch ~ Key Data ~ White 07 pin 03 LtGreen (DATA) Ignition switch ~ SWC ~ White 07 pin 04 Pink (DATA) Ignition switch ~ Ignition ~ White 07 pin 02 Yellow (+) Ignition switch ~ Key Data ~ White 07 pin 03 LtGreen (DATA) Ignition switch ~ SWC ~ White 07 pin 04 Pink (DATA) Ignition switch ~ Ignition ~ White 07 pin 02 Yellow (+) Ignition switch ~ Key Data ~ White 07 pin 03 LtGreen (DATA) Ignition switch ~ SWC ~ White 07 pin 04 Pink (DATA) Ignition switch ~ Ignition ~ White 07 pin 02 Yellow (+) Ignition switch ~ Key Data ~ White 07 pin 03 LtGreen (DATA) Ignition switch ~ SWC ~ White 07 pin 04 Pink (DATA) Ignition switch ~ Ignition ~ White 07 pin 02 LtBlue (+) Ignition switch ~ Key Data ~ White 07 pin 03 Green (DATA) Ignition switch ~ SWC ~ White 07 pin 04 Pink (DATA) Ignition switch ~ Ignition ~ White 07 pin 02 Yellow (+) Ignition switch ~ Key Data ~ White 07 pin 03 Pink (DATA) Ignition switch ~ SWC ~ White 07 pin 04 Green (DATA) Ignition switch ~
Page 9 of 11 BLADE-AL(DL)-HA2-EN Doc. No.: ##46762## 20171227 TYPE 3 - WIRING DIAGRAM STANDARD 12 VOLT, GROUND AND IGNITION SWITCH CONNECTIONS ARE STILL REQUIRED FROM THE REMOTE STARTER. REMOTE STARTER WHITE/RED WHITE PINK/BLACK BROWN/RED ORANGE/BLACK ORANGE BLUE/RED GREEN/RED *BLADE CONNECTOR EXACT PIN-OUT GRAY/RED 10 20 09 19 08 18 07 17 06 16 05 15 04 14 03 13 02 12 01 11 WHITE/BLACK PINK BLACK BROWN/YELLOW ORANGE/WHITE BLUE/YELLOW YELLOW GRAY/YELLOW WHITE/BLACK - IGNITION (+) CONNECTOR SIDE WHITE/RED - IGNITION (+) VEHICLE SIDE WHITE (NC) YELLOW (NC) BROWN/RED (NC) BROWN/YELLOW (NC) ORANGE/BLACK - KEY DATA ORANGE/WHITE (NC) ORANGE - SWC PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED (NC) GRAY/RED (NC) GRAY/YELLOW (NC) BLACK (NC) KEY DATA SWC 1 2 3 4 5 6 7 IGNITION (+)
Page 10 of 11 BLADE-AL(DL)-HA2-EN Doc. No.: ##46762## 20171227 CARTRIDGE INSTALLATION 1 Slide cartridge into unit. Notice button under LED. 2 Ready for Module Programming Procedure. MODULE PROGRAMMING PROCEDURE 1 Insert key into ignition. 3 Wait, LED will turn solid BLUE for 2 seconds. 2 ON Turn key to ON position. 4 5 OFF Turn key to OFF position. Module Programming Procedure completed.
Page 11 of 11 BLADE-AL(DL)-HA2-EN Doc. No.: ##46762## 20171227 IDENTIFY VEHICLE YEAR 1 Locate the Vehicle Identification Number (VIN), identify the 10th character then match it to its corresponding year. Æ 4 3 A 5 Y 1 N 5 T A L 8 D 5 R 0 X Æ A 1980 l 1990 Y 2000 A 2010 B 1981 M 1991 1 2001 B 2011 C 1982 n 1992 2 2002 C 2012 D 1983 P 1993 3 2003 D 2013 e 1984 R 1994 4 2004 e 2014 F 1985 S 1995 5 2005 F 2015 G 1986 T 1996 6 2006 G 2016 H 1987 V 1997 7 2007 H 2017 J 1988 W 1998 8 2008 J 2018 K 1989 X 1999 9 2009 K 2019 led STATUS Flashing RED DiAGnoSTiCS DURinG PRoGRAMMinG DURinG ReMoTe START WiTH ignition off Missing/wrong information from firmware or vehicle Incorrectly programmed Solid RED Waiting for more vehicle information Incorrectly programmed Flashing BLUE Additional steps required to complete programming MODULE DIAGNOSTICS Correctly programmed and operational Incorrectly programmed or connected Not programmed waiting for more vehicle information False ground when running status from remote starter Solid BLUE then OFF Correctly programmed Reset in progress Reset in progress OFF No activity or already programmed Invalid ground when running status from remote starter At rest and ready for a remote start sequence FACTORY RESET PROCEDURE 1 DISCONNECT cartridge from remote starter. 3 LED will flash red. Immediately RELEASE programming button. 2 PRESS AND HOLD programming button while re-connecting cartridge to remote starter. 4 LED will turn solid red for 2 seconds. RESET COMPLETED. 5 RECONNECT all connectors. Repeat programming procedure.! Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.