Compact Fans for AC and DC. Catalogue 2007

Similar documents
Information. DC axial fans. DC axial fans. DC axial fan overview 27 DC axial fan / DC diagonal fan

AC Fans. AC Fans Overview 117. AC Axial Fans 118. AC Radial Fans 138. Technology. DC Axial Fans. DC Radial Fans. Specials. ACmaxx Axial Fans.

The new fan generation S-Force

S-Force: compact fans for high output

Motors- Basic principles. Expertise, performance, innovation

Hammond Electronic Rack Packaging

RadiPac EC centrifugal fans. New dimensions in efficiency: sizes 630 1,000

Standard-efficiency gas heating. Innovation is our tradition.

Customised drive solutions

S-Force air performance with the power of world champions

Piston Compressors. Volume range: l/min

NEWSLETTER. S-Force. for ebm-papst Business Partner

Power distribution components

S-Force air performance with the power of world champions. The new high-performance compact fans. The engineer s choice

EC Motors, the extended arm of automotive electronics

How do we make city buses cleaner and more comfortable?

Product Data Sheet 8412 NHU-519

Product Data Sheet 3214 JH3-195

4314/17T. Product Data Sheet INDEX

Product Data Sheet 632 NU-006

Contents. Fans. Page. Make Farnell-Newark InOne your first choice - search over 300,000 products at

Product Data Sheet 8412 N/ The engineer's choice

Reliable and Application specific. Slewing Drives for Wind Turbines

Product Data Sheet DV5214 NU

Product Data Sheet 4184 N/17X. The engineer's choice

low carbon centrifugal Pod blowers

Product Data Sheet 614 N/2HH-169 The engineer's choice

Liquid-cooled motors Impressive benefits

Quiet-running family of products with the lowest torque pulsation

Product Data Sheet ACi 4420 HHR

Product Data Sheet 4118 N/ The engineer's choice

Simply a question of better measurement

Reliability is our profession

GreenTech. FlatPak. EC Technology AXIAL. RadiCal. ACi4400 IP68. S-Panther. Blowers. RadiPac. Motors FANS IMPELLERS COMPACT.

Thermal management. Axial fans, radial fans and cooling systems. Fans and blowers for vehicle electronics.

Product Data Sheet ACi 4420 MLR

AC centrifugal fan. backward curved

L-force. MF three-phase AC motors. Phone: Fax: Web: -

INDUSTRIALS GROUP. Screw Compressors. ESM Fixed Speed & VS Variable Speed

Frameless Torque Motor Series

DC motors. G-motion. CTi Automation - Phone: Fax: Web:

Product Data Sheet DV4118 N

Cutting-edge technologies backed by a century of experience

The perfect connection for a perfect performance. The FLUDEX ARPEX combination for a soft starting torque now comes in a standardized series

TEXTAR BRAKE DISCS Product Range

Rotary Blowers Omega Series Air delivery from 0.5 to 160 m³/min Pressure up to 1000 mbar, vacuum to -500 mbar

Press News. Silent, dynamic and powerful: The new motor series ECI Compact by ebm-papst

Bussmann series NH catalogue. Leadership in circuit protection

LINEAR ACTUATORS. Type SL 95 / SL 80 / KL 95 up to 12,000 N with high protection class (IP)

Product Data Sheet 4184 NGX

Systems. Intelligent. Power & Control. Würth Elektronik ICS. Solutions and technologies for:

Splitter Boxes from Liebherr. Strong and quiet-running

Play it safe Connectors Switches Contactors. New Energy. Special Switchgear Solutions

bott vario Professional vehicle equipment for your Mercedes-Benz Estate cars Vito Sprinter

SCD SCHOTTEL COMBI DRIVE

High Performance Axial Fans

RadiPac EC radial impellers Perfection in air handling

Insulation Technologies for the Marine Sector. Made in Germany.

QMOT STEPPER MOTORS MOTORS

Motors and Gearboxes for Warehouse Logistics. Energy efficient Compact Sustainable

Product Data Sheet 624 NR. The engineer's choice

Product Data Sheet 4184 NXHH

PERFECTLY POSITIONED FOR ANY CHASSIS.

AC axial fan. blades with special design (K series) with guard grille for full nozzle

L_Series. L_500 Liquid Ring Compressors

Reliable, economical and safe siemens.com/rail-electrification

product specification

Product Data Sheet 3214 J/2H3F-191

High-Voltage Circuit-Breakers 3AP1/ kv up to 550 kv. Power Transmission and Distribution

Sun protection factor

Product Data Sheet 4414/2H

Wind is our Element. siemens.com/loher-windgenerators. Answers for industry.

THE FASCINATION OF POWER & ROTATION

INDUSTRIES INDUVENT. With the patented Teddington EVOLVENT Nozzle Technology.

RLM EVO High Performance - Plug Fans Impeller with true airfoil blades

trak systemizer Turnkey charging & changing stations


TRANSNORM LOW VOLTAGE MOTORS IC 411 TN LV 1 4E5

Lenze. Global Drive 9300 servo inverters kw

Brushless DC Axial Fans

Ledex Rotary Solenoids

Preferred Series 215 kw to 1500 kw. Catalog DA /2000

Product Data Sheet 4184 NXHH

BPF. Centrifugal Plug Fans

Ball Rail Systems RE / The Drive & Control Company

Plug & Seal Fast-fit plug Connections for Housings, Pipe Ends and Assemblies. Product Information Special Sealing Products

High-Tech Waterjet Cutting

Wind is our Element. siemens.com/loher-windgenerators. Answers for industry.

Drive Systems for Protective Machine Doors Tried and proven

Focus on Ventilation and Farming Solutions LINAK.COM/TECHLINE

AC axial fan. sickled blades (S series), single inlet Wall ring with guard grille

Ultra-reliable cooling technology is in our DNA

SIMOTICS FD looks different, offers more

100 percent excellence.

Get on board the drive train. Change now to SIMOGEAR geared motors for easy installation and more flexibility. siemens.

INTELLIGENTE DRUCKLUFT MADE IN GERMANY

The professionals among lamps OSRAM DULUX energy-saving lamps: top performance for all professional applications

Permanent magnet brakes. Safety from the market leader. PM Line High Torque Line

Motors and Gearboxes for Warehouse Logistics. Energy efficient Compact Sustainable

Listen to the difference. The AxiTop diffuser.

Transcription:

Compact Fans for AC and DC Catalogue 007 RoHS

Trendsetter in Fan Technology Uncompromising quality made by ebm-papst Among the best. Trendsetting with innovative technologies. Listening to customers needs. Developing new ideas to meet requirements and realising them with pioneering spirit. This philosophy has made ebm-papst the technological leader in the world of fans. A brand which has very few alternatives because every fan is a product of decades of application know-how gained from large-volume production and because we are in a position to produce highly efficient quality products. Our intelligent solutions for electronic cooling ensure that you are one step ahead of competitors thanks to innovative, reliable top quality technology which is cost-favorable and in line with market requirements. And if required, tailor-made right down to the last detail. In other words if you need fans which don t actually exist, contact us. Insist on ebm-papst.

Contents Technology DC Axial Fans Informations The company ge 4 Know-how and technology ge 6 Tailor-made ge 8 Types of Fans ge 0 Fan installation ge DC Fans Overview ge 5 Axial Fans ge 9 Radial Fans ge 65 Cross-flow Blowers ge 80 Intelligent Fans / Sensor signal ge 84 Alarm signal ge 88 Vario-Pro ge 93 Speed setting ge 94 Protected Fans ge 96 DC Radial Fans ACmaxx Axial Fans ACmaxx Axial Fans ge 00 AC Fans Overview ge 05 Axial Fans ge 06 Radial Fans ge 6 AC Axial Fans Accessories Finger Guards ge 34 Fan Filters ge 39 Accessories ge 40 AC Radial Fans Definition ge 4 Adresses ge 43 Accessories 3

Company profile: ebm-papst The entire scope of air and drive technology: This is the world of ebm-papst. Originating from the companies ebm, PAPST and mvl, all three rich in tradition, ebm-papst has at its disposal a unique range of products that makes us world market leader. We unite the strengths of three remarkable companies each of them having worked hard to succeed in attaining a leading position in the most diverse fields and segments. More than 8.500 members of staff in Germany and throughout the world develop, produce and distribute our motors and fans. Striving for perfect solutions in applications in the different industries is what determines our daily work. Those who know us know the high standards we apply to our work and our creed: to be as close to our customers as possible and to be simply the best in terms of innovation and reli- Our location in St. Georgen 4

Technology Left: Our headquarters in Mulfingen Right: Our location in Landshut DC Axial Fans For years, ebm, PAPST und mvl have been working together hand in hand. For the benefit of our customers, we use the synergy effect generated by our co-operation and the product ranges that complement each other so well. And so, in 003, we moved even closer and documented this closeness in a joint public appearance and a joint name: ebm-papst. We remain the same only better!! Though our outward appearance may have changed, our inner values remain the same. We still want you to enjoy being close to your established contacts, making their commitment and know-how help you succeed in your specific task. And, of course, we also want you to enjoy the same quality and selection of ebm, PAPST and mvl products: ebm-products are now available from ebm-papst Mulfingen papst-products are now available from ebm-papst St. Georgen mvl-are now available from ebm-papst Landshut. ssionately involved in R&D Our catalogues just list the results of our incessant efforts in R&D: products of highest quality and reliability. After all, it is our passion to constantly try something new and improve what we have. In doing so, we take advantage of the latest development methods and state-of the-art technology and invest quite heavily in R&D facilities. Best of all, though: we rely on excellently trained and skilled engineers and technicians to be at your service in R&D and Sales & Distribution. Producing and assuring high-quality products and services This is our promise that knows no boundaries. Whether we manufacture in our national headquarters or in one of our 0 international production facilities we insist on the same high level of quality! No cheap compromises when it comes to quality control! Our uncompromising QA extends through all process stages: from customer consulting engineering, selection of materials certified vendors, manufacturing of parts all the way through shipping. On top of this, our products have to pass the most rigorous test procedures under all realistic operating conditions: endurance test, salt spray test, vibration test, or in the room for precision noise measuring, just to mention a few. And the product gets approval for series pro- duction only after all the desired characteristics have been determined to be just right. Environmental protection is another priority with ebm-papst. This is why we have developed our product line in EC technology, which makes for very low power consumption, and why we take pride in our manufacturing philosophy. There is absolute focus on environmental care in production, recycling, waste and waste water disposal. Globally Domestic In order to be a specialist for customised solutions throughout the world, you need strong partners. Globally Domestic i.e. being present all over the world and being a national company in each individual country is how we have established ourselves with our successful subsidiaries in all important markets on this globe. And so you will always find ebm-papst close to home and knowing the demands of your very markets. Besides, our worldwide production alliance serves as a basis for competitive prizing. Our global services and logistic outlets, i.e. IT networking, are assuring short reaction times and just-in-time delivery. All our efforts are documented in a comprehensive quality management system, both for products and services. Being certified as complying with the tough requirements of the international standards DIN EN ISO 900, ISO/TS 6949 and DIN EN ISO 400 is just one seal of approval we have got for our incessant strife to provide only the best quality products and services. AC Radial Fans AC Axial Fans ACmaxx Axial Fans DC Radial Fans 5 Accessories

The Ultimate: Quality in Detail Drive know-how For the past 60 years all conceivable types and applications of drive technology have played an essential role at ebm-papst. A commitment that is the foundation for the development of optimum drive solutions regardless of the type of fan and its usage. DC fans are generally equipped with electronically commutated motors; In order to save as much space as possible commutation electronic components are integrated in the hub of the fan. Our AC fans are mostly driven by shadedpole or capacitor motors based on the external rotor principle. In the 3900 and 9900 range of particularly slim fans internal rotor motors are used. Low noise performance Our aerodynamically optimised design and high mechanical precision produce outstanding noise properties in series production. So-called soft commutation electronics of the DC fans ensure an excellent noise performance. By avoiding steep switching ramps when the individual coils are switched, this reduces the structure-borne noise from the motor. Computer-aided measurements performed in the most modern sound measuring chamber are conducted on each fan model from the very beginning. Long service life The bearing system plays a vital role both, in the long life time and quietness of equipment fans. The SINTEC compact bearing provides most of the equipment fans with a proven bearing system. Constant low noise during the entire operating time and considerably lower shock sensitivity are the outstanding features of this bearing technology. Also, with regard to temperature endurance, Sintec compact bearings can be used without problems in most applications. Despite the slightly higher noise and shock sensitivity of ball bearings, this bearing technology should be given preference when exposed to extreme thermal and adverse application conditions (e.g. extreme environmental conditions, critical installation position, etc.). The service life data provided in this catalogue is based on extensive service life tests and mathematically / scientifically proven service life calculations. Our product descriptions are continuously updated with all relevant data obtained from long-term tests. 6

DC Axial Fans Technology Streamline: Aerodynamics With the aid of the most modern computer programs, we are able to optimise the fan impellers and the inner shape of the housing. Air output and available motor performance are exactly matched with the size of fan. Sturdy construction in metal or plastic Fans of metal construction: Sturdy and indestructible. The housing is made of an aluminium alloy whereas the metal surfaces that are subject to corrosion are permanently protected by a black, impact- and abrasion resistant electrophoretic baked enamel. This particular version is highly recyclable. Fans with fibreglass reinforced plastic housing and impeller: Excellent stability and low weight distinguish this highly efficient fan concept. The metal housing and plastic impeller combine the advantages of both types of design. Product images The dimensioned drawings and product photos that appear in the catalog are for orientation purposes and may differ in some details from the actual product design. Safety all inclusive It goes without saying that all ebm-papst fans conform to the approval requirements of the VDE (Association of German Electrical Engineers) and the standards and regulations of UL and CSA. All fans conform to the European Standard EN 60335- or EN 60950 plus those of the UL (Underwriter Laboratories) and CSA (Canadian Standards Association). ebm-papst fans meet the highest requirements of electrical safety. Depending on the type, they are either impedance protected or equipped with a temperature safety switch, a scheme to prevent overload during locked rotor, alarm function or have speed monitoring and speed control. Quality in detail It is the seemingly trivial that makes the difference when a product is labelled made by ebm-papst : consistent maintenance of development and construction specifications; target-oriented design; and assured quality across the entire process chain are the reasons why running times of over 50,000 hours are not unusual. The no-compromise ebmpapst quality assurance spans over all process levels from the choice of materials and the use of carefully selected, certified suppliers, from the production of parts up to final assembly. The sum of all these apparently minor details results in ventilation products with superiour lifetimes and reliability. Product liability Motors and fans from ebm-papst are components; as such, their function is determined in the customer unit. Accessories AC Radial Fans AC Axial Fans ACmaxx Axial Fans DC Radial Fans 7

Tailor-made to Meet Your Special Requirements Practice-oriented: Fans specified and intelligent ebm-papst has always developed customer-specific intelligent fans which meet the exact requirements of the application. We provide a wide range of standard fan types, in many sizes and designs; with intelligent motor features, monitoring and control functions as well as special constructions for use under extreme conditions. They are all based on the standard type fan which you will find in this catalogue. Special fan types for your application can be produced in economical batch sizes. Our expert engineers will assist you in selecting the right configuration. Innovation at its best: Vario-Pro with inside intelligence. Its programmed intelligence thanks to customer-specific configured software modules makes the cooling of electronics even more economical and flexible. For example, temperature-dependent speed profiles are possible with a number of freely selectable interpolation points. External speed settings and a variety of combinable alarm and tachometer functions can also be programmed. The digital motor management achieves high precision of control functions. Higher protection class for every type of application ebm-papst provides on request a variety of fan series which conform to the requirements of Protection Class IP 54: Their stator and all electrical components are fully encapsulated. Stainless steel ball bearings can be used for operation in particularly aggressive media and use under extreme environmental conditions, thus providing additional safety. 8

DC Axial Fans Technology Virtually everything is possible Regardless of your cooling and ventilation tasks, we develop the right solution and what is more, the most economical one. Based on the fans listed in this catalogue, well over 4000 different versions are available. Temperature-controlled fans Fans with temperature-controlled speed have particularly quiet cooling characteristics. Thanks to IC technology, they adapt their speed to the current cooling requirements which results in drastic reduction of noise in most operating modes. A temperature sensor provides the fan with thermal information: Either externally via a single lead or integrated into the hub of the fan. Speed setting via interfaces With a wide range of DC fans with separate control input, ebm-papst provides an alternative to the NTC controlled types of fans. They are especially suitable for systems and units which already have standard interfaces for varying speed via internal switching and control circuits. Main applications are units which demand load-dependent individual speed profiles or systems with stand-by minimum cooling requirements and varied speed increase at varying power peaks. Electronic tacho thanks to sensor signal You wish to be informed about the current fan speed at all times? ebm-papst has fans with an integrated electronic tacho which registers the actual value of the fan speed. Via an integrated sensor, the fan generates speeddependent signals which can be directly utilised. Depending on the number of poles of the motor (, 4 or 6 pole),, or 3 pulses per revolution are generated. Alarm signal for more safety If your application requires monitored fan operation in addition to speed monitoring, ebm-papst also provides a multitude of varying alarm signals. Depending on the type of fan in question, the signal is either static, already evaluated or interface-compatible. The alarm signal output provides reliable long term monitoring and status signal when critical operating conditions evolve. TURBOFAN The DC fans with the 3-phase EC motor technology for exact speed control and high power margin. The drive and control electronics of the TD motors is pre-wired and already integrated in the fans. AC Radial Fans AC Axial Fans ACmaxx Axial Fans DC Radial Fans Accessories 9

Types of Fans and their Function Axial fans: High flow rate at medium pressure The air flow in axial fans, whose blower wheel is similar to that of a propeller, is conducted to a great extent in parallel to the axis of rotation, in other words in the axial direction. Axial fans with free air delivery at zero static pressure have the lowest power input that rises with increasing counterpressure. Axial fans for the cooling of electronic equipment are mostly equipped with external housing and an electric motor integrated into the fan hub. This compact construction allows space-saving accommodation of all devices; the flange is equipped with mounting holes. Diagonal fans: High flow rate at relatively high pressure At first glance diagonal fans only differ slightly from axial fans. Intake is axial whereas exhaust is diagonal. Due to the conical shape of the wheel and housing the air is pressurised higher. In direct comparison with axial fans of the same size and comparable performance, these fans are distinguished by the lower operating noise. Radial fans: Limited flow rate at high pressure Many of the cooling problems that occur can be optimally solved by axial and/or diagonal fans. If however, for example the required cooling air has to be conducted round an angle of 90 or if high pressure is necessary, radial fans are more effective. For your application, ebm-papst offers not only complete radial fans but also motor/blower wheel combinations without external housing. Cross flow blower: High flow rate at low pressure Cross flow blowers are used above all for large-surface air flow in appliances. The air flows through the blade roller twice in the radial direction: At the suction point from the outside to the inside and at the exhaust point from the inside to the outside. Whirls form in the roller due to the vanes which guarantee a steady flow of air through the blower wheel. 0

Selecting the Correct Fan DC Axial Fans. Dissipated heat A large amount of the energy consumed by electrical and electronic devices is converted into heat. In selecting the correct fan, therefore, it is important to determine the dissipated heat that must be removed. The electrical power consumption of the unit to be cooled, often represents a suitable value for this purpose.. Permissible temperature rise The air flow which the selected fan is required to generate, is determined by the dissipated heat and the permissible rise ( T) of the cooling air flow (from entry to exit of the device to be cooled). The max. allowable T depends greatly on the temperature sensitivity of the individual device components. T = 5K means e.g. that the average air flow leaving the device to be cooled may only be 5 C warmer than the ambient temperature (a large volume of air is required for this purpose). A lower air flow rate is sufficient if a higher temperature difference (e.g. T = 0K), can be tolerated. 3. Required cooling air flow In the below diagram a horizontal line is drawn from the dissipated heat to intersect with the selected T line. 40 0 00 80 60 40 0 Technology Read down from this point to obtain the required value for the cooling air flow. Diagram-formula: Pv [w] V [m 3 /h] 3 T [K] 4. Optimum operating range The required fan, however, must also be able to deliver a suitable static pressure, in order to force the cooling air through the appliance. A fan must therefore be selected that provides the required air flow performance within its optimum operating range (see also the performance curves under technical data). 0, 0, 0,3 0,4 0,5 (in H O) 0 0 40 60 80 00 0 5. Fan selection 40 80 Optimum Operating Range 0 60 00 If the requirements of an application are fulfilled by more than one fan, the noise level, space requirements, economy and ambient conditions will assist in making the final choice. CFM m³/h AC Radial Fans AC Axial Fans ACmaxx Axial Fans DC Radial Fans Accessories

Fan installation Information on installation When a fan is operated for the first time in an application, the user may have noticed that the flow rate in the appliance was lower than expected. What is the reason for this? The values stated in this catalogue were determined under optimum, constant and comparable measurement conditions. Ideal mounting conditions under which free air intake and exhaust are present is seldom feasible in practice. Quite frequently the fans must be mounted in the proximity of other components or cabinet panels. As a consequence, the intake and exhaust currents may be restricted causing the air flow to diminish and the noise level to increase. Fans are particularly sensitive to obstructions which are positioned directly in front of the output cross section as they often cause an increase in tonal noise. Baffle Multidirectional intake, laminar currents Unidirectional exhaust, turbulent Intake or exhaust side installation Under ideal conditions, the operating point is represented as the intersection between the characteristic fan and device curves, regardless of whether the fan is positioned at the air intake or exhaust side of the device. In addition to ensuring the required flow rate, several additional aspects must be considered for determining an appropriate fan concept. The intake air currents of a fan are mainly laminar, comprising nearly the entire suction area. By contrast, the exhaust air of a fan is generally turbulent, while it flows on a preferred direction, e.g. axial for an axial fan. The turbulences of the exhaust intensify the heat transfer from components within the air currents, so that mounting the fan at the air intake side of the device is recommended for cooling and heating. Mounting the fan at the device intake is also advantageous because the fan will not be subjected to the dissipation heat of the device. Therefore, it operates at low ambient temperatures and has a higher life expectancy. Accident prevention With their high efficiency, our fan products operate at high speeds, which can pose a risk of injury. To prevent injury, they may be put into operation only after they have been properly installed and equipped with suitable protective devices (such as finger guards). Our advice: The distance between the fan and adjacent components should be at least equal to the mounting depth of the fan.

DC Fans DC Fans Overview 5 DC Axial Fans 9 DC Radial Fans 65 DC Fans Cross-Flow 80 AC Radial Fans AC Axial Fans Technology DC-Lüfter Axial Fans ACmaxx Axial Fans DC-Radial Fans 3 Accessories

DC Fans Technical Information Range of fans Users of ebm-papst fans have the widest range of DC axial fans at their disposal: From 5 mm to 80 mm in size. Every single type of fan can be optimally integrated in the respective appliance concept. The highly economic brushless motor technology of these fans provides a unique variety of intelligent innovations that can be realised today at prices that would have been unthinkable just a few years ago. Electronic protection against reverse polarity ebm-papst DC fans have electronically commutated drives with electronic protection against reverse polarity.the electronics are conveniently located in the fan hub. Product life expectancy A distinctive feature of DC fan technology is the convincingly high product life expectancy. Thanks to the excellent efficiency of the brushless drives, the thermal load of the bearings is reduced thus considerably increasing the life expectancy of the fans. Supply voltage The supply voltage of ebm-papst DC fans can be varied thus the airflow can be matched optimally to the cooling requirements and noise reduced to a minimum. ebm-papst DC fans can be driven with voltages that are reduced as much as 50 % or increased by 5 % of their nominal voltage (see voltage range in the tables containing technical data). Speed control VARIOFAN the fans with IC technology and temperature-dependent speed control. VARIO- FANS always cool at the speed required by the appliance resulting in speeds as much as 50% lower than those of standard fans and a drastic reduction of the noise level in almost all operating conditions. VARIOFANs are controlled without dissipation losses: At lower speeds their power consumption is reduced proportionally. Protection Class DC fans with sleeve and ball bearings are powered by Class E insulated motors. All ebmpapst fans conform to the requirements of Protection Class IP 0. Fans conforming to IP 54 and special protection classes are also available. 4

Axial Fans for DC Operation Overview Technology Dimensions Approvals 5 Volt DC axial DC axial mm m 3 /h Type Type Type Type / V Volt 4 Volt 48 Volt VARIOFAN ge DC Fans Overview Series 50 5 x 5 x 8. VDE, UL, CSA 55 M 9 3. VDE, UL, CSA 55 N 5 N 9 5.0 VDE, UL, CSA 55 H 9 Series 400 F Series 400 40 x 40 x 0 6.0 VDE, UL, CSA 4 FM 0 8.0 VDE, UL, CSA 405 F 4 F 44 F 0 9.0 VDE, UL, CSA 405 FH 4 FH 44 FH 0 40 x 40 x 0 0 VDE, UL, CSA 405 4 44 3.5 VDE, UL, CSA 4 H 44 H DC Radial Fans Series 400 J 40 x 40 x 5 9 VDE, UL, CSA 4 J 44 J VDE, UL, CSA 4 JH 44 JH 4 VDE, UL, CSA 4 JHH 44 JHH Series 500 F 50 x 50 x 5 0 VDE, UL, CSA 5 F 54 F 3 Series 600 F 60 x 60 x 5 9 VDE, UL, CSA 6 FL 4 9 VDE, UL, CSA 605 F 6 F 64 F 4 33 VDE, UL, CSA 6 FH 4 Series 60 60 x 60 x 5 VDE, UL, CSA 6 L 64 L 5 30 VDE, UL, CSA 6 M 64 M 5 40 VDE, UL, CSA 6 N 64 N 5 46 VDE, UL, CSA 6 H 64 H 5 Series 600 N 56 VDE, UL, CSA 6 HH 64 HH 5 60 x 60 x 5 VDE, UL, CSA 6 NGLE 64 NGL / 6 5 VDE, UL, CSA 6 NGMLE 64 NGML / 6 35 VDE, UL, CSA 6 NGME 64 NGM 68 NM / V 6/7 4 VDE, UL, CSA 6 NN 64 NN 68 NN V 6/7 ACmaxx Axial Fans 46 VDE, UL, CSA 6 NH 64 NH 6 56 VDE, UL, CSA 6 NHH 64 NHH 6 NEW Series 600 J Series 700 F Series 8400 N 60 x 60 x 3 70 * 6 JH 64 JH 68 JH 8 70 x 70 x 5 8 VDE, UL, CSA 7 FL-005 9 36 VDE, UL, CSA 7 FM-006 9 44 VDE, UL, CSA 7 F 74 F 9 80 x 80 x 5 33 VDE, UL, CSA 84 NLE 844 NL / V 30/3 45 VDE, UL, CSA 84 NMLE 844 NML / V 30/3 AC Axial Fans 58 VDE, UL, CSA 84 NME 844 NM / V 30/3 69 VDE, UL, CSA 84 N 844 N / 30 79 VDE, UL, CSA 84 NH 844 NH 30 Series 8300 80 x 80 x 3 3 VDE, UL, CSA 83 L 834 L / 3 48 VDE, UL, CSA 83 M 834 M / 3 54 VDE, UL, CSA 8305 83 834 838 / 3 67 VDE, UL, CSA 83 HL 834 HL 838 HL 3 80 VDE, UL, CSA 834 H 838 H 3 AC Radial Fans NEW Series 800 J 80 x 80 x 38 3 * 8 JN 84 JN 88 JN 33 *approvals applied for 5 Accessories

Axial Fans for DC Operation Overview Dimensions Approvals Volt 4 Volt 48 Volt VARIOFAN ge DC axial Series 3400 N Series 3300 NEW Series 300 J Series 4400 F NEW Series 4400 FN Series 4300 N Series 4300 NEW Series 4400 Series 400 Series 400 N mm m 3 /h Type Type Type / V 9 x 9 x 5 6 VDE, UL, CSA 34 NLE 344 NL / 34 7 VDE, UL, CSA 34 NME 344 NM / V 34/35 84 VDE, UL, CSA 34 N 344 N / V 34/35 94 VDE, UL, CSA 34 NH 344 NH / 34 0 VDE, UL, CSA 34 NHH 344 NHH / 34 9 x 9 x 3 56 VDE, UL, CSA 33 L 334 L / 36 68 VDE, UL, CSA 33 M 334 M / 36 80 VDE, UL, CSA 33 334 338 / 36 85 VDE, UL, CSA 334-40 36 93 VDE, UL, CSA 33-77 36 07 VDE, UL, CSA 334 H 338 H 36 9 x 9 x 38 30 VDE, UL, CSA 3 JN 34 JN 38 JN 37 46 VDE, UL, CSA 3 JH-304 34 JH-306 38 JH 37 30 * 34 JH3 38 JH3 37 9 x 9 x 5 94 VDE, UL, CSA 44 FGL 444 FL / 38 4 VDE, UL, CSA 44 FGML 38 40 VDE, UL, CSA 44 FM 444 FM / 38 70 VDE, UL, CSA 44 F 444 F 448 F / 38 9 x 9 x 5 5 * 44 FNH 444 FNH 448 FNH 39 00 * 444 FNN 39 9 x 9 x 3 93 VDE, UL, CSA 43 NL 434 NL / 40 37 VDE, UL, CSA 43 NM 434 NM / 40 66 VDE, UL, CSA 43 NN 434 NN **438 NGN / 40 76 VDE, UL, CSA 43 NH 434 NH 40 98 VDE, UL, CSA 43 NHH 434 NHH 40 9 x 9 x 3 95 VDE, UL, CSA 43 L 434 L / 4 40 VDE, UL, CSA 43 M 434 M 438 M / V 4/4 70 VDE, UL, CSA 43 434 438 / V 4/4 80 VDE, UL, CSA 43-43 434-47 4 04 VDE, CSA 43-79 434-80 4 9 x 9 x 38 50 * 44 L 43 84 * 44 M 444 M 448 M 43 05 * 44 N 444 N 448 N 43 40 * 44 H 444 H 448 H 43 9 x 9 x 38 86 VDE, UL, CSA 4 L 44 L 44 7 VDE, UL, CSA 4 M / 44 65 VDE, UL, CSA 4 44 48 / 44 84 VDE, UL, CSA 4 H 44 H 48 H 44 9 x 9 x 38 60 VDE, UL, CSA 48 NGX 484 NGX 45 60 VDE, UL, CSA 484 NXM 488 NXM 45 80 VDE, UL, CSA 48 NX 484 NX 45 37 VDE, UL, CSA 48 NXH 484 NXH 45 *approvals applied for **No approvals 6

Technology DC axial Dimensions approvals Volt mm m 3 /h Type Type Type / V 4 Volt 48 Volt VARIOFAN ge DC Fans Overview NEW Series 400 N 9 x 9 x 38 60 VDE, UL, CSA 4 NHH 44 NHH 448 NHH 46 30 VDE, UL, CSA 4 NH3 44 NH3 48 NH3 46 355 * 4 NH4 44 NH4 48 NH4 46 NEW Series DV 400 Series 500 N 390 * 44 NH5 48 NH5 46 440 * 44 NH6 48 NH6 46 9 x 9 x 38 75 VDE, UL, CSA DV 4 N DV 44 N DV 48 N 47 7 x 7 x 38 87 VDE, UL, CSA 5 NM 54 NM 58 NM 48 6 VDE, UL, CSA 5 NN 54 NN 58 NN 48 DC Radial Fans 5 VDE, UL, CSA 5 NH 54 NH 58 NH 48 338 VDE, UL, CSA 5 NHH 54 NHH 58 NHH 48 Series DV 500 7 x 7 x 38 70 VDE, UL, CSA DV 5 N DV 54 N DV 58 N 49 Series 500 N 35 x 35 x 38 ** 58 NL 50 Series 700 N 50 VDE, UL, CSA 5 N 54 N 58 N 50 50 Ø x 38 360 VDE, UL, CSA 7 N 74 N 78 N 5 40 VDE, UL, CSA 74 NH 5 Series 700 N 50 Ø x 55 360 VDE, UL, CSA 7 N 74 N 78 N 5 Series 600 N 7 Ø x 5 05 VDE, UL, CSA 648 NL 53 350 VDE, UL, CSA 6 NM 64 NM 648 NM 53 40 VDE, UL, CSA 64 N 648 N V 53 NEW Series 600 NTD Series DV 600 Series DV 600 TD Series 6400 480 VDE, UL, CSA 64 NH 648 NH 53 600 VDE, UL, CSA 64 NTD 648 NTD 54 7 Ø x 5 540 VDE, UL, CSA DV 64 DV 648 55 7 Ø x 5 700 VDE, UL, CSA DV 64 TD DV 648 TD 56 7 x 50 x 5 350 VDE, UL, CSA 64 M 644 M 6448 M 57 ACmaxx Axial Fans 40 VDE, UL, CSA 644 6448 V 57 480 VDE, UL, CSA 644 H 6448 H 57 NEW NEW Series 6400 TD Series DV 6400 Series DV 6400 TD Series WG 80 7 x 50 x 5 600 VDE, UL, CSA 644 TD 6448 TD 58 7 x 50 x 5 600 VDE, UL, CSA 6448 TDHH 58 7 x 60 x 5 530 VDE, UL, CSA DV 644 DV 6448 59 7 x 60 x 5 680 VDE, UL, CSA DV 644 TD DV 6448 TD 60 80 Ø x 70 900 WG 80-AB3-0 6 95 WG 80-AB47-0 6 AC Axial Fans Series WG 00 5 x 5 x 80 090 VDE, UL, CSA WG 00-HH70-5 6 005 VDE, UL, CSA WG 00-HH0-5 6 Series WG 08 3 Ø x 80 050 WG 08-BA35-5 WG 08-BA73-5 63 Series WG 50 80 x 80 x 80 90 VDE, UL, CSA WG 50-HH37-5 WG 50-HH67-5 64 *approvals applied for **No approvals AC Radial Fans 7 Accessories

Radial Fans for DC Operation Overview Dimensions Approvals Volt 4 Volt 48 Volt VARIOFAN ge DC radial Series RV 40 Series RLF 35 Series RLF 48 NEW Series RL 65 Series RL 90 N Series RLF 00 Series RG 90 Series RG 5 N Series RG 60 N NEW Series RG 60NTD NEW Series REF 00 NEW Series RER 0 Series RER 5 N Series RER 60 N NEW Series RER QG 60NTD 030 DC Cross Flow Series QG 030 mm m 3 /h Type Type Type / V 76 x 76 x 7 8 VDE, UL, CSA RV 40-8/ L 65 4 VDE, UL, CSA RV 40-8/ H 65 5 x 5 x 5 9,6 * RLF 35-8/N RLF 35-8/4N 66 76 x 76 x 7 VDE, UL, CSA RL 48-9/ ML RL 48-9/4 ML 67 8 VDE, UL, CSA RL 48-9/ RL 48-9/4 ML 67 94 x 97 x 33 56 * RL 65-/ RK65-/4 68 6 * RL65-/H RL65-/4H 68 x x 37 40 VDE, UL, CSA RL 90-8/ N RL 90-8/4 N / 69 55 ** RL 90-8/8 NH 69 7 x 7 x 5 64 VDE, UL, CSA RLF 00-/ RLF 00-/4 RLF 00-/8 70 35 x 35 x 38 55 VDE, UL, CSA RG 90-8/ N RG 90-8/4 N RG 90-8/8 N / 7 80 x 80 x 40 60 VDE, UL, CSA RG 5-9/ NM RG 5-9/4 NM 7 87,5 VDE, UL, CSA RG 5-9/ N RG 5-9/4 N RG 5-9/8 N 7 0 x 0 x 56 39 VDE, UL, CSA RG 60-8/ NM RG 60-8/4 NM 73 09 VDE, UL, CSA RG 60-8/ N RG 60-8/4 N RG 60-8/8 N 73 0 x 0 x 56 308 VDE, UL, CSA RG 60-8/4 NTD RG 60-8/8 NTD 74 370 VDE, UL, CSA RG 60-8/4 NTDH 74 00 Ø x 5 86 VDE, UL, CSA REF 00-/ REF 00-/4 REF 00-/8 75 04 VDE, UL, CSA REF 00-/8 H 75 0 Ø x 5 90 * RER 0-36/4 NHH RER 0-36/8 NHH 76 38 Ø x 35 0 VDE, UL, CSA RER 5-9/ NG 77 74 VDE, UL, CSA RER 5-9/4 NM 77 0 VDE, UL, CSA RER 5-9/ N RER 5-9/4 N RER 5-9/8 N 77 65 Ø x 54 40 VDE, UL, CSA RER 60-8/ N RER 60-8/4 N RER 60-8/8 N 78 65 Ø x 54 354 VDE, UL, CSA RER 60-8/8 NTD 79 mm m 3 /h Type Type Type / V 03 x 50 x 48 75 VDE, UL, CSA QG 030-48/ QG 030-48/4 80 60 x 50 x 48 00 VDE, UL, CSA QG 030-98/ QG 030-98/4 80 365 x 50 x 48 40 VDE, UL, CSA QG 030-303/ QG 030-303/4 80 45 x 50 x 48 55 VDE, UL, CSA QG 030-353/ QG 030-353/4 80 *approvals applied for **No approvals 8

DC Axial Fans Series 50 5 x 5 x 8 mm Technology DC micro-fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity. The fan only operates when the polarity is correct. Impedance-protected against locked rotor and overloading. Fan of fibreglass reinforced plastic. PBT housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 8. Stripped and tinned ends. Mass 5 g. DC Axial Fans AC Axial Fans ACmaxx Axial Fans 50 40 30 0 0 3 Voltage Range Service Life L0 at 0 C at 60 C DC Radial Fans Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours P. 84 55 M.. 5 4.5...5.5 5 < 3 0. 6 000-0...+70 45 000 / 4 000 55 N 3..9 5 4.5...5.5 6 < 3 0.4 9 600-0...+70 40 000 / 000 / 55 H 4.5.6 5 4.5...5.5 3 4.4 0.6 000-0...+55 35 000 / 0 000* 3 / 5 N 3..9 0...4 5 < 3 0.5 9 000-0...+70 40 000 / 000 / * at 55 C AC Radial Fans 0,05 0,0 0,5 (in H O) 0 0,4 0,8,,6,0,4 CFM 3 4 m³/h 9 Accessories

DC Axial Fans Series 400 F 40 x 40 x 0 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity. The fan only operates when the polarity is correct. Impedance-protected locked rotor and overloading. Fan of fibreglass reinforced plastic. PBT housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 8, TR 64. Stripped and tinned ends. Mass 7 g. Voltage Range Service Life L0 at 0 C at 60 C Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 405 F 8 4.7 5 4.5...5.5. 4.4 0.7 5 400-0...+70 45 000 / 5 000 / 405 FH 9 5.3 5 4.5...5.5 6.0 4.6 0.9 6 000-0...+70 45 000 / 5 000 3 / 4 FM 6 3.5 0...4 6.5 3.8 0.6 4 300-0...+70 45 000 / 5 000 4 F 8 4.7 0...4. 4.4 0.7 5 400-0...+70 45 000 / 5 000 4 FH 9 5.3 0...4 6.0 4.6 0.8 6 000-0...+70 45 000 / 5 000 3 / 44 F 8 4.7 4 0.0...8.0. 4.4 0.8 5 400-0...+70 45 000 / 5 000 / 44 FH 9 5.3 4.6...6.4 6.0 4.6 0.9 6 000-0...+70 45 000 / 5 000 3 30 5 0 5 0 5 0,0 0,04 0,06 0,08 0,0 (in H O) 3 0 3 4 5 4 6 8 CFM m³/h

DC Axial Fans Series 400 40 x 40 x 0 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity. The fan only operates when the polarity is correct. Impedance-protected against locked rotor and overloading. Type 4 H and 44 H with electronic protection against blocking Fan of fibreglass reinforced plastic. PBT housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 8, TR 64. Stripped and tinned ends. Mass 7 g. 50 40 30 0 0 Voltage Range Service Life L0 at 0 C at 60 C Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 405 0.0 5.9 5 4.5...5.5 8 3.8 0.9 6 000-0...+70 50 000 / 0 000 / 4 0.0 5.9 0...4 8 3.8 0.9 6 000-0...+70 50 000 / 0 000 /;/39 4 H 3.5 7.9 0...4 9 4.7.6 8 00-0...+60 45 000 / 5 000 /39 44 0.0 5.9 4 0...8 8 3.8.0 6 000-0...+70 50 000 / 0 000 / 44 H 3.5 7.9 4 0...6.5 9 4.7.6 8 00-0...+60 45 000 / 5 000 / 0,05 0,0 0,5 (in H O) 0 3 4 5 6 7 4 6 8 0 CFM m³/h

DC Axial Fans Series 400 J 40 x 40 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading. Fan of fibreglass reinforced plastic. PBT housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 4, TR 64. Stripped and tinned ends. Mass 50 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 4 J 9. 8...4.0 39 5.5.4 0 300-0...+70 60 000 / 30 000 4 JH.9 8...3.5 43 5.8 3.0 700-0...+70 60 000 / 30 000 / 4 JHH 4 4. 8...3.5 46 6. 3.3 3 000-0...+60 57 500 / 35 000 3 / 44 J 9. 4 8...7 39 5.5.4 0 300-0...+70 60 000 / 30 000 44 JH.9 4 8...7 43 5.8 3.0 700-0...+70 60 000 / 30 000 / 44 JHH 4 4. 4 8...7 46 6. 3.6 3 000-0...+60 57 500 / 35 000 3 / 00 50 00 50 0, 0,4 0,6 (in H O) 3 0 4 6 8 0 5 0 5 0 CFM m³/h

DC Axial Fans Series 500 F 50 x 50 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity. The fan only operates when the polarity is correct. Impedance-protected against locked rotor and overloading. Fan of fibreglass reinforced plastic. PBT housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 8, TR 64. Stripped and tinned ends. Mass 5 g. 5 F 0.8 0.8...3. 30 4.5.0 5 000-0...+70 50 000 / 0 000 / 54 F 0.8 4.6...6.4 30 4.5.0 5 000-0...+70 50 000 / 0 000 / 30 5 0 5 0 5 0,0 0,04 0,06 0,08 0,0 (in H O) Voltage Range Service Life L0 at 0 C at 60 C Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 0 4 6 8 0 5 0 5 CFM m³/h

DC Axial Fans Series 600 F 60 x 60 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity. The fan only operates when the polarity is correct. Impedance-protected against locked rotor and overloading. Type 6 FH with electronic protection against blocking Fan of fibreglass reinforced plastic. PBT housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 8, TR 64. Stripped and tinned ends. Mass 30 g. Voltage Range Service Life L0 at 0 C at 60 C Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 605 F 9 7. 5 4.5...5. 7 4.4. 4 000-0...+50 50 000 / 0 000 6 FL 9..5...3. 6 3.6 0.4 650 0...+70 50 000 / 0 000 /39 6 F 9 7. 0.8...3. 7 4.4.0 3 900-0...+70 50 000 / 0 000 / 6 FH 33 9.4 0.0...3. 3 4.8.4 4 500-0...+60 45 000 / 5 000 3 / 64 F 9 7. 4.6...6.4 7 4.4. 3 900-0...+70 50 000 / 0 000 / 5 0 5 0 5 3 0,0 0,04 0,06 0,08 (in H O) 0 3 6 9 5 8 CFM 5 0 5 0 5 m³/h

DC Axial Fans Series 60 60 x 60 x 5 mm DC fan with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading. Fan of fibreglass reinforced plastic.pbtp housing, PA impeller. Air exhaust over struts. Rotational direction CW looking at rotor. High pressure build-up. Low impact sound development. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 85 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 6 L.4 8...5 0 3.7 0.5 300-0...+85 80 000 / 0 000 6 M 30 7.7 8...5 9 4.3.0 4550-0...+75 77 500 / 30 000 6 N 40 3.5 8...5 35 4.7.9 600-0...+70 7 500 / 35 000 3 6 H 46 7. 8...5 39 5..3 6850-0...+70 70 000 / 35 000 4 6 HH 56 33.0 8...5 43 5.6 3.5 800-0...+70 65 000 / 3 500 5 64 L.4 4 8...8 0 3.7.0 300-0...+70 80 000 / 40 000 64 M 30 7.7 4 8...8 9 4.3.5 4550-0...+70 77 500 / 37 500 64 N 40 3.5 4 8...8 35 4.7. 600-0...+70 7 500 / 35 000 3 64 H 46 7. 4 8...8 39 5..4 6850-0...+70 70 000 / 35 000 4 64 HH 56 33.0 4 8...8 43 5.6 3.6 800-0...+70 65 000 / 3 500 5 / 5 00 75 50 5 Voltage Range Service Life L0 0, 0, 0,3 0,4 (in H O) 5 4 3 0 5 0 5 0 5 30 CFM 0 0 30 40 50 m³/h

DC Axial Fans Series 600 N 60 x 60 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 66 g. 00 80 60 40 0 6 5 4 3 Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 6 NGLE.4 8...5 6 3.6 0.6 500-0...+85 80 000 / 7 500 6 NLE.4 8...5 6 3.6 0.4 500-0...+85 80 000 / 7 500 6 NGMLE 5 4.7 8...5 9 3.9 0.7 3 000-0...+80 80 000 / 3 500 6 NMLE 5 4.7 8...5 9 3.9 0.4 3 000-0...+85 80 000 / 7 500 / 6 NGME 35 0.6 8...5 8 4.6. 4 00-0...+75 80 000 / 35 000 3 6 NME 35 0.6 8...5 8 4.6 0.8 4 00-0...+75 80 000 / 35 000 3 / 6 NN 4 4.7 8...5 35 5.0.6 5 00-0...+70 70 000 / 35 000 4 / 6 NH 46 7. 8...5 37 5.3.0 5 600-0...+70 70 000 / 35 000 5 / 6 NHH-8 56 33.0 8...5 4 5.7.9 6 800-0...+70 60 000 / 30 000 6 / 64 NGL.4 4 8...8 6 3.6.0 500-0...+70 80 000 / 40 000 64 NL.4 4 8...8 6 3.6 0.9 500-0...+70 80 000 / 40 000 / 64 NGML 5 4.7 4 8...8 9 3.9. 3 000-0...+70 80 000 / 40 000 / 64 NML 5 4.7 4 8...8 9 3.9.0 3 000-0...+70 80 000 / 40 000 64 NGM 35 0.6 4 8...8 8 4.6.7 4 00-0...+70 80 000 / 40 000 3 / 64 NM 35 0.6 4 8...8 8 4.6.4 4 00-0...+70 80 000 / 40 000 3 /;/39 64 NN 4 4.7 4 8...8 35 5.0.8 5 00-0...+70 70 000 / 35 000 4 64 NH 46 7. 4 8...6 37 5.3. 5 600-0...+70 70 000 / 35 000 5 / 64 NHH 56 33.0 4 8...6 4 5.7 3.0 6 850-0...+70 60 000 / 30 000 6 64 NHH-9 56 33.0 4 8..8 4 5.7 3.0 6 850-0...+70 60 000 / 30 000 6 / 68 NM 35 0.6 48 36...56 8 4.6.4 4 00-0...+70 80 000 / 40 000 3 68 NN 4 4.7 48 36...56 35 5.0. 5 00-0...+65 70 000 / 40 000 4 /;/;/39 0, 0, 0,3 (in H O) 0 5 0 5 0 5 30 0 0 30 40 50 CFM m³/h

DC Axial Fans Series 600 N VARIOFAN 60 x 60 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. Speed control by temperature sensor. With electronic protection against reverse polarity, locked rotor and overloading. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 66 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 30 C 55 C 30 C 55 C 30 C 55 C 30 C 55 C 30 C 55 C 6 NGMI 6 NMI 6 NGNI 6 NNI 6 NGNV 8 0.6 4 3.5.3 50 8...6-0...+65 80 000 / 45 000 35 0.6 8 4.6.7 4 00 6 9.4 6 3.6.0 400 3 8...6-0...+65 80 000 / 45 000 35 0.6 8 4.6.4 4 00 4 3 3.5 8 3.8.7 900 5 8...6-0...+65 70 000 / 40 000 4 4. 35 5.0.4 5 00 6 3 3.5 8 3.8. 900 8...6-0...+65 70 000 / 40 000 5 4 4. 35 5.0.5 5 00 6 3 3.5 8 3.8.7 900 5 8...6-0...+65 70 000 / 40 000 4 4. 35 5.0.4 5 00 6 /37 40 30 0 0 0,05 0,0 0,5 (in H O) 6 NGMI 40 30 0 0 0,05 0,0 0,5 (in H O) 4 3 6 NMI 60 40 0 0,05 0,0 0,5 0,0 0,5 (in H O) 6 NGNI 6 6 NNI 6 NGNV 5 30 C 55 C 30 C 55 C 30 C 55 C 0 3 6 9 5 8 CFM 5 0 5 0 5 30 m³/h 0 3 6 9 5 8 CFM 5 0 5 0 5 30 m³/h 0 4 8 6 0 0 0 30 CFM m³/h V-Types I-Types NTC + Air flow NTC - Temperature Sensor Temperature Sensor The temperature sensor for controlling the motor speed is not included in delivery. Temperature sensor LZ 370 see accessories. Temperature sensor (NTCresistor) for controlling the motor speed is positioned directly in the air flow.

DC Axial Fans Series 600 J 60 x 60 x 3 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. Innovative impeller design with winglets. Compact design with high power density. With electronic protection against reverse polarity, locked rotor and overloading. Compression-rigid curve and low noise factor. Fan of fibreglass reinforced plastic. PBT housing, PA impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via leads AWG 4, TR 64. Stripped and tinned ends. Mass 00 g. 300 50 00 50 00 50 NEW TYPES Voltage Range Service Life L0 at tmax Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 6 JH 70 4. 7...3.6 53 6.4 7.7 700-0...+70 57 500 / 7 500 / 64 JH 70 4. 4 4...6.4 53 6.4 7.7 700-0...+70 57 500 / 7 500 / 68 JH 70 4. 48 36...60.0 53 6.4 7.7 700-0...+70 57 500 / 7 500 0, 0,4 0,6 0,8,0 (in H O) 0 8 6 4 3 40 0 0 30 40 50 60 CFM m³/h

DC Axial Fans Series 700 F 70 x 70 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity. The fan only operates when the polarity is correct. Protected against locked rotor and overloading. Fan of fibreglass reinforced plastic. PBT housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 8, TR 64. Stripped and tinned ends. Mass 53 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 7 F/L* 8 6.5 8...3.8 5 4.7 0.6 3 300-0...+70 60 000 / 30 000 / 7 F/M* 36. 8...3.8 3 5.0. 4 300-0...+70 60 000 / 30 000 / 7 F 44 5.9 8...3.8 38 5.3.7 5 300-0...+70 60 000 / 30 000 3 / 74 F 44 5.9 4 8...8 38 5.3.5 5 300-0...+70 60 000 / 30 000 3 60 50 40 30 0 0 0,05 0,0 0,5 0,0 (in H O) 3 Voltage Range Service Life L0 *Version with 3-pole Molex plug housing -0-035 Molex Contacts 08-50-03 0 4 8 6 0 4 0 0 30 40 CFM m³/h

DC Axial Fans Series 8400 N 80 x 80 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading; partially impedance protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG 4, TR 64. Stripped and tinned ends. Mass 95 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 84 NGLE 33 9.4 8...5 3.5 0.5 500-0...+85 80 000 / 7 500 / 84 NLE 33 9.4 8...5 7 3.7 0.3 500-0...+85 80 000 / 7 500 84 NGMLE 45 6.5 8...5 9 3.9 0.9 050-0...+80 80 000 / 3 500 / 84 NMLE 45 6.5 8...5 4.0 0.6 050-0...+85 80 000 / 7 500 84 NGME 58 34. 8...5 6 4.3.4 600-0...+75 80 000 / 35 000 3 / 84 NME 58 34. 8...5 7 4.4.0 600-0...+75 80 000 / 35 000 3 84 NG 69 40.6 8...5 3 4.7.0 3 00-0...+70 70 000 / 35 000 4 / 84 N 69 40.6 8...5 3 4.7.0 3 00-0...+70 70 000 / 35 000 4 / 84 NH 79 46.5 8...3. 37 5.0. 3 600-0...+70 70 000 / 35 000 5 /; / 84 NH-7 79 46.5 8...5 37 5.0.4 3 600-0...+70 70 000 / 35 000 5 844 NGL 33 9.4 4 8...8 3.5 0.7 500-0...+70 80 000 / 40 000 / 844 NL 33 9.4 4 8...8 7 3.7 0.7 500-0...+70 80 000 / 40 000 844 NGML 45 6.5 4 8...8 9 3.9. 050-0...+70 80 000 / 40 000 844 NML 45 6.5 4 8...8 4.0. 050-0...+70 80 000 / 40 000 844 NGM 58 34. 4 8...8 6 4.3.4 600-0...+70 80 000 / 40 000 3 / 844 NM 58 34. 4 8...8 7 4.4.4 600-0...+70 80 000 / 40 000 3 844 NG 69 40.6 4 8...8 3 4.7.0 3 00-0...+70 70 000 / 35 000 4 / 844 N 69 40.6 4 8...8 3 4.7.0 3 00-0...+70 70 000 / 35 000 4 / 844 NH 79 46.5 4 8...6 37 5.0.4 3 600-0...+70 70 000 / 35 000 5 / 844 NH- 79 46.5 4 8...8 37 5.0.4 3 600-0...+70 70 000 / 35 000 5 848 N 69 40.6 48 36...56 3 4.7.0 3 00-0...+70 70 000 / 35 000 4 40 30 0 0 0,05 0,0 0,5 (in H O) 3 5 4 0 8 6 4 3 40 0 0 30 40 50 60 CFM m³/h

DC Axial Fans Series 8400 N VARIOFAN 80 x 80 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. Speed control by temperature sensor. With electronic protection against reverse polarity, locked rotor and overloading; partially impendance protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 4, TR 64. Stripped and tinned ends. Mass 95 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 30 C 50 C 84 NGLV 0.8 < 0 < 3 0.9 900 0...4-0...+70 80 000 / 40 000 33 9.4 3.5. 500 30 C 50 C 84 NGMLV 7 5.9 < 0 3.0. 00 3 8...4-0...+70 80 000 / 40 000 45 6.5 9 3.9.5 050 4 /37 30 C 50 C 84 NGMV 35 0.6 < 3 3.5.4 600 5 8...4-0...+70 80 000 / 35 000 58 34. 6 4.3.0 600 6 30 C 50 C 84 NGMI 35 0.6 < 3 3.5.4 600 5 8...4-0...+70 80 000 / 35 000 58 34. 6 4.3.0 600 6 7,5 5,5 0,0 0,0 0,03 (in H O) 84 NGLV 5 0 5 0,0 0,04 0,06 (in H O) 4 3 84 NGMLV 5 0 5 0 5 0,0 0,04 0,06 0,08 (in H O) 84 NGMV 6 84 NGMI 5 30 C 50 C 30 C 50 C 30 C 50 C 0 4 8 6 0 0 0 30 CFM m³/h 0 5 0 5 0 5 0 0 30 40 CFM m³/h 0 5 0 5 0 5 30 0 0 30 40 50 CFM m³/h V-Types I-Types + Air flow NTC - Temperature Sensor NTC Temperature Sensor The temperature sensor for controlling the motor speed is not included in delivery. Temperature sensor LZ 370 see accessories. Temperature sensor (NTCresistor) for controlling the motor speed is positioned directly in the air flow.

DC Axial Fans Series 8300 80 x 80 x 3 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading by PTC-resistor; partially impedance protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 70 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 8305 G 48 8.3 5 4.5...5.5 34 5.0. 3 050-0...+75 70 000 / 5 000 83 GL 3 8.8 6...5 4 4.0.0 000-0...+75 80 000 / 35 000 83 L 3 8.8 6...5 4 4.0.0 000-0...+75 80 000 / 35 000 83 GM 48 8.3 6...5 34 5.0.8 3 000-0...+75 70 000 / 30 000 83 M 48 8.3 6...5 34 5.0.8 3 000-0...+75 70 000 / 30 000 83 G 54 3.8 6...5 36 5..5 3 300-0...+75 70 000 / 30 000 3 83 54 3.8 6...5 36 5.. 3 300-0...+75 70 000 / 30 000 3 / 83 HL 67 39.4 6...5 43 5.8 4.0 4 00-0...+75 6 500 / 7 500 4 / 83 H 80 47. 7...6 48 6. 5.5 5 000-0...+60 50 000 / 5 000 5 834 L 3 8.8 4...8 4 4.0.0 000-0...+75 80 000 / 35 000 834 M 48 8.3 4...8 34 5.0. 3 000-0...+75 70 000 / 30 000 834 G 54 3.8 4...8 36 5..5 3 300-0...+75 70 000 / 30 000 3 834 54 3.8 4...8 36 5..5 3 300-0...+75 70 000 / 30 000 3 /; / 834 HL 67 39.4 4...8 43 5.8 4.3 4 00-0...+75 6 500 / 7 500 4 / 834 H 80 47. 4...6.5 48 6. 6.0 5 000-0...+75 55 000 / 5 000 5 /;/;/9 838 54 3.8 48 36...56 36 5..6 3 300-0...+75 70 000 / 30 000 3 /; /7 838 HL 67 39.4 48 36...56 43 5.8 4.3 4 00-0...+75 6 500 / 7 500 4 /; / 838 H 80 47. 48 36...56 48 6. 5.8 5 000-0...+65 55 000 / 30 000 5 /; /7 0 00 80 60 40 0 0, 0, 0,3 0,4 (in H O) 5 4 3 Rotor protrusion max. 0.4 mm 0 8 6 4 3 40 0 0 30 40 50 60 CFM m³/h

DC Axial Fans Series 800 J 80 x 80 x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. Innovative impeller design with winglets. Compact design with high power density. With electronic protection against reverse polarity, locked rotor and overloading. Compression-rigid curve and low noise factor. Fan of fibreglass reinforced plastic. PBT housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG 4, TR 64. Stripped and tinned ends. Mass 60 g. 50 00 50 00 50 NEW TYPES Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 8 JN 3 77.7 7...3.8 55 6.6 0 8400-0...+70 6 500 / 3 500 / 84 JN 3 77.7 4 8...6.4 55 6.6 0 8400-0...+70 6 500 / 3 500 / 88 JN 3 77.7 48 36...53.0 55 6.6 8400-0...+70 6 500 / 3 500 / 0, 0,4 0,6 0,8 (in H O) 0 5 30 45 60 75 0 40 60 80 00 0 CFM m³/h

DC Axial Fans Series 3400 N 9 x 9 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading; partially impedance protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG 4, TR 64. Stripped and tinned ends. Mass 00 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 34 NGLE 6 35.9 8...5 3 4.0. 950-0...+80 80 000 / 30 000 34 NLE 6 35.9 8...5 3 4.0 0.8 950-0...+85 80 000 / 7 500 34 NGME 7 4.4 8...5 8 4.3.6 300-0...+75 75 000 / 3 500 34 NME 7 4.4 8...5 8 4.3. 300-0...+75 75 000 / 3 500 / 34 NG 84 49.4 8...5 3 4.7. 700-0...+70 70 000 / 35 000 3 / 34 N 84 49.4 8...5 3 4.7. 700-0...+70 70 000 / 35 000 3 / 34 NGH 94 55.3 8...5 36 5.0.5 3 000-0...+70 70 000 / 35 000 4 34 NH 94 55.3 8...5 36 5.0.5 3 000-0...+70 70 000 / 35 000 4 /; /39 34 NGHH 0 60.0 8...3. 39 5. 3. 3 50-0...+60 70 000 / 45 000 5 / 34 NHH 0 60.0 8...3. 39 5. 3. 3 50-0...+60 70 000 / 45 000 5 / 34 NHH-379 0 60.0 8...5 39 5..7 3 50-0...+70 70 000 / 35 000 5 344 NGL 6 35.9 4 8...8 3 4.0.4 950-0...+70 80 000 / 40 000 344 NL 6 35.9 4 8...8 3 4.0.4 950-0...+70 80 000 / 40 000 344 NGM 7 4.4 4 8...8 8 4.3.8 300-0...+70 75 000 / 37 500 344 NM 7 4.4 4 8...8 8 4.3.8 300-0...+70 75 000 / 37 500 344 NG 84 49.4 4 8...8 3 4.7.3 700-0...+70 70 000 / 35 000 3 344 N 84 49.4 4 8...8 3 4.7.3 700-0...+70 70 000 / 35 000 3 / 344 NGH 94 55.3 4 8...6 36 5.0 3.0 3 000-0...+70 70 000 / 35 000 4 / 344 NH 94 55.3 4 8...6 36 5.0 3.0 3 000-0...+70 70 000 / 35 000 4 344 NGHH 0 60.0 4 8...6 39 5. 3. 3 50-0...+70 70 000 / 35 000 5 344 NGHH-389 0 60.0 4 8...8 39 5. 3. 3 50-0...+70 70 000 / 35 000 5 344 NHH 0 60.0 4 8...6 39 5. 3. 3 50-0...+70 70 000 / 35 000 5 /39 344 NHH-386 0 60.0 4 8...8 39 5. 3. 3 50-0...+70 70 000 / 35 000 5 348 N 84 49.4 48 36...56 3 4.7.4 700-0...+70 70 000 / 35 000 3 40 30 0 0 3 Another 48 V DC models on request. 0,05 0,0 0,5 (in H O) 5 4 0 0 0 30 40 50 0 40 60 80 CFM m³/h

DC Axial Fans Series 3400 N VARIOFAN 9 x 9 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. Speed control by temperature sensor. With electronic protection against reverse polarity, locked rotor and overloading; partially impedance protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 4, TR 64. Stripped and tinned ends. Mass 00 g. Voltage Range Service Life L0 30 C 50 C 30 C 50 C Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 6 NGLE 44 5.8 5.9 8...5 4 6 3.6 3.5 0.7.5 400 500-0...+70 80 000 / 40 000 34 NGMV 8...4.0-0...+70 75 000 / 37 500 6 NLE 7 5.8 4.4 8...5 8 6 3.6 4.3 0.6.0 300 500-0...+70 80 000 / 40 000 6 NGMLE 5 6.9 8...5 9 3.9 0.9 3 000-0...+70 80 000 / 40 000 50 9.4 6 3.7.6 600 3 6 34 NMLE NGV 5 6.9 8...6 8...5 9 3.9 0.8 3 000-0...+70 75 80 000 / 37 40 500 000 84 49.4 3 4.7.5 700 4 /37 /37 0 5 0 5 0,0 0,04 0,06 0,08 (in H O) 34 NGMV NTC Temperature Sensor The temperature sensor for controlling the motor speed is not included in delivery. Temperature sensor LZ 370 see accessories. + 30 C 50 C 0 8 6 4 3 40 0 0 30 40 50 60 CFM m³/h 5 0 5 0 5 0,0 0,04 0,06 0,08 (in H O) 4 3 34 NGV 30 C 50 C 0 8 6 4 3 40 CFM 0 0 30 40 50 60 70 m³/h

DC Axial Fans Series 3300 9 x 9 x 3 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading by PTC-resistor; partially impedance-protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 90 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 33 GL 56 33.0 6...5 9 4.5.4 50-0...+75 80 000 / 35 000 33 L 56 33.0 6...5 9 4.5.4 50-0...+75 80 000 / 35 000 33 GM 68 40.0 6...5 34 4.8.7 600-0...+75 70 000 / 30 000 33 M 68 40.0 6...5 34 4.8.7 600-0...+75 70 000 / 30 000 33 G 80 47. 6...5 37 5..4 3 000-0...+75 70 000 / 30 000 3 33 80 47. 6...5 37 5..4 3 000-0...+75 70 000 / 30 000 3 /; /7 33-77 93 54.7 6...5 43 5.7 3.5 3 500-0...+75 65 000 / 7 500 5 334 G 80 47. 4...8 37 5..6 3 000-0...+75 70 000 / 30 000 3 334 80 47. 4...8 37 5..6 3 000-0...+75 70 000 / 30 000 3 /7 334-40 85 50.0 4...8 40 5.4 3.0 3 00-0...+75 60 000 / 5 000 4 334 H 07 63.0 4...8 47 6.0 5.3 4 000-0...+75 57 500 / 5 000 6 / 338 80 47. 48 36...56 37 5..7 3 000-0...+75 70 000 / 30 000 3 / 338 H 07 63.0 48 36...56 47 6.0 4.3 4 000-0...+60 57 500 / 35 000 6 /;/;/7 70 60 50 40 30 0 0 0,05 0,0 0,5 0,0 0,5 (in H O) 6 5 4 3 Rotor protrusion max. 0.4 mm 0 0 0 30 40 50 60 0 40 60 80 00 CFM m³/h

DC Axial Fans Series 300 J 9 x 9 x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. Innovative impeller design with winglets. Compact design with high power density. With electronic protection against reverse polarity, locked rotor and overloading. Compression-rigid curve and low noise factor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via leads AWG 4, TR 64. Stripped and tinned ends. Mass 40 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 3 JN 30 76.5 7...3.8 5 6. 7.5 6 000-0...+70 70 000 / 35 000 / 3 JH 46 86.0 7...5 55 6.4 9.0 6 800-0...+70 70 000 / 35 000 34 JN 30 36. 4...8 5 6. 8.0 6 000-0...+70 70 000 / 35 000 34 JH 46 86.0 4...30 55 6.4 9.0 6 800-0...+70 70 000 / 35 000 / 34 JH3 30 35.4 4 0...6 66 7.4 9.0 0 500-0...+55 45 000 / 30 000 3 38 JN 30 76.5 48 36...56 5 6. 7.0 6 000-0...+70 70 000 / 35 000 38 JH 46 86.0 48 36...53 55 6.4 9.5 6 800-0...+70 70 000 / 35 000 38 JH3 30 35.4 48 36...54 66 7.4 9.0 0 500-0...+55 45 000 / 30 000 3 00 60 0 80 40 NEW TYPES Voltage Range Service Life L0 0, 0, 0,3 0,4 0,5 0,6 0,7 (in H O) 600 500 400 300 00 00 0,8,,6,0 0,4 (in H O) 0 3 5 50 50 75 00 00 5 CFM 50 00 m³/h 0 5 30 45 60 75 0 40 60 80 00 0 CFM m³/h

50 40 30 0 0 4 3 DC Axial Fans Series 4400 F 9 x 9 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading by PTC-resistor; partially impedance protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 4, TR 64. Stripped and tinned ends. Mass 75 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 44 FGL 94 55.3 7...4 6 3.9.3 600-0...+75 80 000 / 35 000 /;/39 44 FGML 4 67. 7...6 3 4.3.0 950-0...+75 75 000 / 3 500 / 44 FML 4 67. 7...6 3 4.3.0 950-0...+75 75 000 / 3 500 44 FGM 40 8.4 7...6 38 4.8 3. 400-0...+75 70 000 / 30 000 3 / 44 FM 40 8.4 7...6 38 4.8 3. 400-0...+75 70 000 / 30 000 3 / 44 FG 70 00. 8...6 43 5.3 5.3 900-0...+60 60 000 / 37 500 4 44 F 70 00. 8...6 43 5.3 5.3 900-0...+60 60 000 / 37 500 4 / 444 FL 94 55.3 4 8...8 6 3.9.0 600-0...+75 80 000 / 35 000 / 444 FM 40 8.4 4...8 38 4.8 3. 400-0...+75 70 000 / 30 000 3 / 444 FG 70 00. 4...8 43 5.3 5.0 900-0...+60 60 000 / 37 500 4 / 444 F 70 00. 4...8 43 5.3 5.0 900-0...+60 60 000 / 37 500 4 /;/;/39 448 FG 70 00. 48 8...53 43 5.3 5.5 900-0...+60 60 000 / 37 500 4 448 F 70 00. 48 8...53 43 5.3 5.5 900-0...+60 60 000 / 37 500 4 /;/;/39 Available on request: Fan housing with moulded-in spacers. For mounting over both flanges. 0,05 0,0 0,5 (in H O) 0 5 30 45 60 75 90 CFM 5 50 75 00 5 m³/h

DC Axial Fans Series 4400 FN 9 x 9 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. Rigid compression curve at low noise. Innovative impeller design with winglets. Compact design with high power density. With electronic protection against reverse polarity and locked rotor. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 40 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 44 FNH 5 3.4 7...3. 55 6.7.0 5 400-0...+70 60 000 / 30 000 444 FNN 00 7.7 4 4...8.0 5 6.5 8.5 4 850-0...+70 60 000 / 30 000 444 FNH 5 3.4 4 8...6.4 55 6.7.0 5 400-0...+70 60 000 / 30 000 448 FNH 5 3.4 48 36...53.0 55 6.7.0 5 400-0...+70 60 000 / 30 000 75 50 5 00 75 50 5 NEW Voltage Range Service Life L0 0, 0, 0,3 0,4 0,5 0,6 (in H O) 0 0 40 60 80 00 0 50 00 50 00 CFM m³/h

DC Axial Fans Series 4300 N 9 x 9 x 3 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading; partially impedance protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 30 g. 80 60 40 0 5 4 3 Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 43 NGL 93 54.7 7...4.5 7 4.. 650-0...+70 80 000 / 40 000 43 NL 93 54.7 7...4.5 7 4.. 650-0...+70 80 000 / 40 000 43 NGM 37 80.6 7...4.5 37 5..6 450-0...+70 70 000 / 35 000 43 NM 37 80.6 7...4.5 37 5..6 450-0...+70 70 000 / 35 000 43 NGN 66 97.7 7...4.5 43 5.6 4.0 3 000-0...+70 60 000 / 30 000 3 43 NN 66 97.7 7...4.5 43 5.6 4.0 3 000-0...+70 60 000 / 30 000 3 43 NH 76 03.6 7...4.5 45 5.8 4.5 3 50-0...+70 60 000 / 30 000 4 / 43 NHH 98 6.5 7...4.5 49 6. 6.5 3 600-0...+60 57 500 / 35 000 5 434 NGL 93 54.7 4...8 7 4.. 650-0...+70 80 000 / 40 000 434 NL 93 54.7 4...8 7 4.. 650-0...+70 80 000 / 40 000 434 NGM 37 80.6 4...8 37 5..6 450-0...+70 70 000 / 35 000 434 NGN 66 97.7 4...8 43 5.6 4.3 3 000-0...+70 60 000 / 30 000 3 434 NN 66 97.7 4...8 43 5.6 4.3 3 000-0...+70 60 000 / 30 000 3 434 NH 76 03.6 4...8 45 5.8 4.5 3 50-0...+70 60 000 / 30 000 4 434 NHH 98 6.5 4...8 49 6. 6.0 3 600-0...+70 57 500 / 7 500 5 / 438 NGN 66 97.7 48 36...56 43 5.6 4. 3 000-0...+70 60 000 / 30 000 3 0, 0, 0,3 (in H O) 0 5 30 45 60 75 90 5 50 75 00 5 50 CFM m³/h

DC Axial Fans Series 4300 9 x 9 x 3 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading by PTC-resistor; partially impedance protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 0 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 43 GL 95 55.9 6...5.0 30 4.3. 550-0...+75 80 000 / 35 000 43 L 95 55.9 6...5.0 30 4.3. 550-0...+75 80 000 / 35 000 43 GM 40 8.4 6...5.0 39 5.3.6 300-0...+75 70 000 / 30 000 43 M 40 8.4 6...5.0 39 5.3.6 300-0...+75 70 000 / 30 000 / 43 G 70 00. 6...5.0 45 5.8 5.0 800-0...+75 6 500 / 7 500 3 43 70 00. 6...5.0 45 5.8 5.0 800-0...+75 6 500 / 7 500 3 /;/9 43-43 80 05.9 6...5.0 47 6. 5.8 3 000-0...+75 57 500 / 5 000 4 43-79 04 0. 6...3. 5 6.4 8.5 3 400-0...+75 47 500 / 0 000 5 434 L 95 55.9 4...8.0 30 4.3. 550-0...+75 80 000 / 35 000 434 M 40 8.4 4...8.0 39 5.3.6 300-0...+75 70 000 / 30 000 434 G 70 00. 4...8.0 45 5.8 5.0 800-0...+75 6 500 / 7 500 3 434 70 00. 4...8.0 45 5.8 5.0 800-0...+75 6 500 / 7 500 3 /;/ 434-47 80 05.9 4...8.0 47 6. 5.8 3 000-0...+75 57 500 / 5 000 4 434-80 04 0. 4...6.5 5 6.4 9.5 3 400-0...+75 45 000 / 0 000 5 438 M 40 8.4 48 36...56.0 39 5.3 3.5 300-0...+75 70 000 / 30 000 /;/7 438 G 70 00. 48 36...53.0 45 5.8 5.0 800-0...+75 6 500 / 7 500 3 / 438 70 00. 48 36...53.0 45 5.8 5.0 800-0...+75 6 500 / 7 500 3 /;/7 80 60 40 0 0, 0, 0,3 (in H O) 5 4 3 Voltage Range Service Life L0 Rotor protrusion max. 0.4 mm 0 5 30 45 60 75 90 5 50 75 00 5 50 CFM m³/h

DC Axial Fans Series 4300 VARIOFAN 9 x 9 x 3 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. Speed control by temperature sensor. With electronic protection against reverse polarity, locked rotor and overloading by PTC-resistor; partially impedance protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via 3 leads AWG, TR 64. Stripped and tinned ends. Mass 0 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 5 C 50 C 43 MV 68 40.0 3.7.5 50 8...5-0...+65 70 000 / 40 000 40 8.4 39 5.3 3.0 300 /7 5 C 50 C 43 V 85 50.0 9 4..4 400 3 8...3. -0...+65 65 000 / 35 000 70 00. 45 5.8 5.5 800 4 /7 30 C 50 C 434 V 85 50.0 9 4. 3.0 400 3 4...7-0...+65 65 000 / 35 000 70 00. 45 5.8 5.4 800 4 /7 5 C 50 C 438 V 6 35.9.6 000 5 48 40...53-0...+65 65 000 / 35 000 70 00. 45 5.8 5.4 800 6 /7 40 30 0 0 0,05 0,0 0,5 (in H O) 43 MV 5 C 50 C 60 50 40 30 0 0 0,05 0,0 0,5 0,0 (in H O) 4 3 5 C/ 30 C 43 V 434 V 50 C 60 50 40 30 0 0 0,05 0,0 (in H O) 0,0 0,5 6 5 5 C 438 V 50 C 0 0 0 30 40 50 60 70 0 40 60 80 00 CFM m³/h 0 5 30 45 60 75 90 CFM 5 50 75 00 5 m³/h 0 5 30 45 60 75 90 CFM 5 50 75 00 5 m³/h Rotor protrusion max. 0.4 mm + NTC Temperature Sensor The temperature sensor for controlling the motor speed is not included in delivery. Temperature sensor LZ 370 see accessories.

DC Axial Fans Series 4400 9 x 9 x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. Innovative impeller design with winglets. With electronic protection against reverse polarity, locked rotor and overloading. Fan of fibreglass reinforced plastic. PBTP housing, PBT impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 30 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 44 L 50 88.3 7...4 37 5.0.5 700-0...+70 65 000 / 3 500 44 M 84 08.3 7...4 4 5.3 4. 3 300-0...+70 60 000 / 30 000 44 N 05 0.7 7...4 46 5.6 5.5 3 650-0...+70 55 000 / 7 500 3 / 44 H 40 4.3 7...4 49 6.0 8.9 4 300-0...+70 50 000 / 5 000 4 / 444 L 50 88.3 4 8...8 37 5.0.5 700-0...+70 65 000 / 3 500 444 M 84 08.3 4 8...8 4 5.3 4.0 3 300-0...+70 60 000 / 30 000 444 N 05 0.7 4 8...8 46 5.6 5. 3 650-0...+70 55 000 / 7 500 3 444 H 40 4.3 4 8...8 49 6.0 8.6 4 300-0...+70 50 000 / 5 000 4 / 448 L 50 88.3 48 36...60 37 5.0.5 700-0...+70 65 000 / 3 500 448 M 84 08.3 48 36...60 4 5.3 4. 3 300-0...+70 60 000 / 30 000 448 N 05 0.7 48 36...60 46 5.6 5. 3 650-0...+70 55 000 / 7 500 3 448 H 40 4.3 48 36...60 49 6.0 8.6 4 300-0...+70 50 000 / 5 000 4 / 5 00 75 50 5 NEW Voltage Range Service Life L0 0, 0, 0,3 0,4 (in H O) 4 3 0 5 50 75 00 5 CFM 50 00 50 00 m³/h

DC Axial Fans Series 400 9 x 9 x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading by PTC-resistor; partially impedance protected. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 90 g. 80 60 40 0 4 3 Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 4 L 86 50.6 7...4.5 9 4.. 600-0...+75 80 000 / 35 000 4 GM 7 74.7 7...4.5 38 4.9. 350-0...+75 70 000 / 30 000 4 M 7 74.7 7...4.5 38 4.9. 350-0...+75 70 000 / 30 000 4 65 97. 7...4.5 45 5.6 4.3 3 050-0...+75 6 500 / 7 500 3 /; / 4 H 84 08.3 7...4.5 49 5.9 5.3 3 400-0...+65 60 000 / 3 500 4 /; / 44 L 86 50.6 4...8 9 4.. 600-0...+75 80 000 / 35 000 44 G 65 97. 4...8 45 5.6 4.3 3 050-0...+75 6 500 / 7 500 3 44 65 97. 4...8 45 5.6 4.3 3 050-0...+75 6 500 / 7 500 3 /; /;/7 44 H 84 08.3 4...8 49 5.9 5.3 3 400-0...+65 60 000 / 3 500 4 /; / 48 65 97. 48 36...56 45 5.6 4.3 3 050-0...+75 6 500 / 7 500 3 /; / 48 H 84 08.3 48 36...56 49 5.9 5.6 3 400-0...+65 60 000 / 3 500 4 / 0, 0, 0,3 (in H O) 0 5 30 45 60 75 90 5 50 75 00 5 50 CFM m³/h

DC Axial Fans Series 400 N 9 x 9 x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading by PTC-resistor; partially impedance protected. Metal fan housing. Impeller of fibre-glass reinforced plastic PA. Housing with ground lug M4 for M4 x 8 screws. Air intake over struts. Rotational direction CW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via flat pins,8 x 0,5 mm. Mass 390 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 48 NGX 60 94. 7...5 44 5.3 3.5 800-0...+75 85 000 / 37 500 / 48 NX 80 05.9 7...5 49 5.7 4.5 3 00-30...+75 85 000 / 37 500 /; / 48 NXH 37 39.5 7...4 57 6.5.0 4 400-30...+55 70 000 / 50 000 3 484 NGX 60 94. 4...30 44 5.3 3.5 800-0...+75 85 000 / 37 500 / 484 NXM 60 94. 4...30 44 5.3 3.5 800-30...+75 85 000 / 37 500 484 NX 80 05.9 4...9 49 5.7 4.5 3 00-30...+75 85 000 / 37 500 /;/7 484 NXH 37 39.5 4...5 57 6.5.0 4 400-30...+55 70 000 / 50 000 3 / 488 NGX 60 94. 48 36...56 44 5.3 3.8 800-0...+75 85 000 / 37 500 488 NXM 60 94. 48 36...56 44 5.3 3.5 800-30...+75 85 000 / 37 500 / 40 0 00 80 60 40 0 3 Voltage Range Service Life L0 0, 0, 0,3 0,4 0,5 (in H O) 0 0 40 60 80 00 0 40 80 0 60 00 CFM m³/h

NEW TYPES DC Axial Fans Series 400 N High Performance 9 x 9 x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading. Metal fan housing. Impeller of fibre-glass reinforced plastic PA. Housing with ground lug M4 for M4 x 8 screws. Air intake over struts. Rotational direction CW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, UL 007, TR 64. Mass 390 g. 350 300 50 00 50 00 50 Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours P. 84 4 NHH 60 5.9 9...5 60 6.8 5.5 5 000-0...+65 70 000 / 55 000 4 NH3 30 8.4 9...5 65 7. 9.5 6 000-0...+65 65 000 / 37 500 / 4 NH4 355 08.9 9...4 67 7.4 3.0 6 800-0...+65 6 500 / 35 000 3 / 44 NHH 60 5.9 4 6...30 60 6.8.5 5 000-0...+65 70 000 / 5 500 44 NH3 30 8.4 4 6...30 65 7. 9.5 6 000-0...+65 65 000 / 37 500 / 44 NH4 355 08.9 4 6...30 67 7.4 30.0 6 800-0...+65 6 500 / 35 000 3 / 44 NH5 390 9.5 4 6...30 70 7.6 45.0 7 500-0...+65 6 500 / 35 000 4 / 44 NH6 440 59.0 4 6...30 73 8. 60.0 8 400-0...+65 6 500 / 35 000 5 / 48 NHH 60 5.9 48 36...60 60 6.8 5.5 5 000-0...+65 70 000 / 5 500 48 NH3 30 8.4 48 36...60 65 7. 9.5 6 000-0...+65 65 000 / 37 500 / 48 NH4 355 08.9 48 36...60 67 7.4 8.0 6 800-0...+65 6 500 / 35 000 3 / 48 NH5 390 9.5 48 36...60 70 7.6 4.0 7 500-0...+65 6 500 / 35 000 4 / 48 NH6 440 59.0 48 36...60 73 8. 55.0 8 400-0...+65 6 500 / 35 000 5 / 0, 0,4 0,6 0,8,0, (in H O) 3 600 500 400 300 00 00 0,8,,6,0 0,4 (in H O) 5 4 0 50 00 50 00 50 00 00 300 400 CFM m³/h 0 50 00 50 00 50 00 00 300 400 CFM m³/h 46

DC Diagonal Fans Series DV 400 9 x 9 x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. Diagonal fan with compression-proof curve and low noise level. With electronic protection against reverse polarity, locked rotor and overloading. Metal flange. Impeller of fibre-glass reinforced plastic PA. Housing of fibre-glass reinforced PBT. Metal housing optional. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass: Plastic housing 375 g, metall housing 455g. 300 50 00 50 00 50 Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours DV 4 N 75 6.9 9...5 60 6.7.0 6 000-0...+65 70 000 / 40 000 DV 44 N 75 6.9 4 6...30 60 6.7.0 6 000-0...+65 70 000 / 40 000 / DV 48 N 75 6.9 48 36...60 60 6.7.0 6 000-0...+65 70 000 / 40 000 0, 0,4 0,6 0,8,0 (in H O) 0 30 60 90 0 50 50 00 50 00 50 CFM m³/h

DC Axial Fans Series 500 N 7 x 7 x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 30 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 5 NM 87 0. 7...4.5 43 5.3 4.6 750-0...+75 6 500 / 7 500 5 NN 6 7. 7...4 46 5.6 6.0 3 50-0...+75 57 500 / 5 000 / 5 NH 5 48.3 7...4 5 6.0 9.8 3 650-0...+70 45 000 / 500 3 5 NHH* 338 98.9 9...5 58 6.6 9.0 4 900-0...+65 45 000 / 5 000 4 / 54 NM 87 0. 4...8 43 5.3 4.6 750-0...+75 6 500 / 7 500 54 NN 6 7. 4...8 46 5.6 6.0 3 50-0...+75 57 500 / 5 000 / 54 NH 5 48.3 4...8 5 6.0 9.8 3 650-0...+70 45 000 / 500 3 /; / 54 NHH* 338 98.9 4 6...30 58 6.6 7.5 4 900-0...+65 45 000 / 5 000 4 / 58 NM 87 0. 48 40...56 43 5.3 5.0 750-0...+75 6 500 / 7 500 58 NN 6 7. 48 40...56 46 5.6 6.5 3 50-0...+65 57 500 / 3 500 58 NH 5 48.3 48 40...56 5 6.0 0.0 3 650-0...+55 45 000 / 3 500 3 / 58 NHH* 338 98.9 48 36...60 58 6.6 8.0 4 900-0...+65 45 000 / 5 000 4 / 00 50 00 50 0, 0,4 0,6 0,8 (in H O) 4 3 NEW TYPES * Type NHH: Fan housing with moulded-in spacers. 0 40 80 0 60 00 00 00 300 CFM m³/h

DC Diagonal Fans Series DV 500 7 x 7 x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading. Metal flange, impeller of fibreglass reinforced plastic PA. Housing of fibre-glass reinforced PBT. Metal housing optional. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass: Plastig housing 45 g, metall housing 490 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours DV 5 N 70 58.9 9...5 56 6.4.0 5 000-0...+65 70 000 / 40 000 / DV 54 N 70 58.9 4 6...30 56 6.4 9.0 5 000-0...+65 70 000 / 40 000 / DV 58 N 70 58.9 48 36...60 56 6.4 9.0 5 000-0...+65 70 000 / 40 000 / 50 00 50 00 50 Voltage Range Service Life L0 0, 0,4 0,6 0,8 (in H O) 0 5 50 75 00 5 50 50 00 50 00 50 CFM m³/h

DC Axial Fans Series 500 N 35 x 35 x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity and locked rotor. Metal fan housing and impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 650 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 5 N 50 47. 6...5 48 6. 9.5 900-5...+7 80 000 / 37 500 /; /7 54 N 50 47. 4...30 48 6. 9.5 900-5...+7 80 000 / 37 500 / 58 NL 7.8 48 4...60 8 4..6 400-5...+7 85 000 / 40 000 58 N 50 47. 48 4...60 48 6. 9.5 900-5...+7 80 000 / 37 500 /; / 80 60 40 0 0, 0, 0,3 (in H O) 0 0 40 60 80 00 0 50 00 50 00 CFM m³/h

DC Axial Fans Series 700 N 50 Ø x 38 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity and locked rotor. Metal fan housing and impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 60 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 7 N 360.9 6...5.0 55 6.5.0 850-5...+7 80 000 / 37 500 / 74 N 360.9 4...30.0 55 6.5.0 850-5...+7 80 000 / 37 500 / 74 NH 40 47. 4...6.5 59 7.0 9.0 3 350-5...+7 75 000 / 35 000 78 N 360.9 48 4...60.0 55 6.5.0 850-5...+7 80 000 / 37 500 /; / 75 50 5 00 75 50 5 Voltage Range Service Life L0 Leads fixed with cable fixer: supernatant of cable fixer mm. 0, 0, 0,3 0,4 0,5 0,6 (in H O) 0 40 80 0 60 00 CFM 00 00 300 m³/h

DC Axial Fans Series 700 N 50 Ø x 55 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity and locked rotor. Metal fan housing. Impeller of fibreglass reinforced plastic PA. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 75 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 7 N 360.9 6...5 53 6..0 3 050-5...+7 80 000 / 37 500 / 74 N 360.9 4...30 53 6..0 3 050-5...+7 80 000 / 37 500 /;/7;/9 78 N 360.9 48 4...60 53 6..0 3 050-5...+7 80 000 / 37 500 5 00 75 50 5 0, 0, 0,3 0,4 (in H O) 0 40 80 0 60 00 00 00 300 CFM m³/h

DC Axial Fans Series 600 N 7 Ø x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity and locked rotor; electronic motor current limitation in the start-up phase and when rotor is blocked. Metal fan housing, impeller of fibre-glass reinforced plastic PA. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via flat pins 3 x 0.5 mm. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 80 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 6 NM 350 06.0 8...5 50 5.7.0 850-0...+7 80 000 / 37 500 64 NM 350 06.0 4...3 50 5.7.0 850-0...+7 80 000 / 37 500 / 64 N 40 4.3 4...8 55 6. 8.0 3 400-0...+7 75 000 / 35 000 3 /;/;/9 64 NH 480 8.5 4...8 6 6.9 6.0 4 000-0...+55* 70 000 / 50 000 4 648 NL 05 0.7 48 8...60 35 4.5 4.0 700-0...+7 86 000 / 40 000 648 NM 350 06.0 48 8...60 50 5.7.5 850-0...+7 80 000 / 37 500 648 N 40 4.3 48 8...60 55 6. 7.0 3 400-0...+7 75 000 / 35 000 3 /;/ 648 NH 480 8.5 48 36...56 6 6.9 6.0 4 000-0...+55* 70 000 / 50 000 4 30 C 50 C VARIOFAN DC fans with temperature-dependent speed control 05 0.7 35 4.5 8.5 700 5 64 NT 4...8-0...+7 77 500 / 35 000 40 4.3 55 6. 8.0 3 400 6 30 C 50 C 648 NT 05 0.7 35 4.5 8.5 700 5 48 8...60-0...+7 77 500 / 35 000 40 4.3 55 6. 7.0 3 400 6 * 7 C upon request 75 50 5 00 75 50 5 0, 0, 0,3 0,4 0,5 0,6 (in H O) 4 3 Temperature sensor (NTC-resistor) for controlling the motor speed is positioned directly in the air flow. Voltage Range Service Life L0 50 5 00 75 50 5 0, 0, 0,3 0,4 0,5 (in H O) 5 4 30 C 50 C 0 40 80 0 60 00 CFM 00 00 300 m³/h 0 50 00 50 00 50 00 00 300 400 CFM m³/h

DC Axial Fans Series 600 NTD TURBOFAN 7 Ø x 5 mm rticularly powerful DC electronic fan with 3 phase EC drive and fully integrated operating electronics. For load-dependent speed control with highly intelligent motor management and power and speed reserves which open up completely new areas of application. With electronic protection against reverse polarity, locked rotor and overloading. Metal fan housing, impeller of fibre-glass reinforced plastic PA. Air exhaust over struts. CCW rotational direction looking at rotor. Electrical connection via leads. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 80 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours min max min max 64 NTD... 648 NTD... 90 53.0 8.0 800 4 6...8-0...+60 70 000 / 45 000 600 353. 65 7.4 50.0 5 00 90 53.0 8.0 800 48 40...55* -0...+60 70 000 / 45 000 600 353. 65 7.4 50.0 5 00 *Fan with extended voltage range available on request. Models 64 NTD... and 648 NTD... are available in customer-specific, custom-developed variants only. The data specified here is technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs. 400 300 00 00 0,4 0,8, (in H O) nmin nmax 0 50 00 50 00 50 300 350 CFM 00 00 300 400 500 600 m³/h

DC Diagonal Fans Series DV 600 7 Ø x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity and locked rotor; electronic motor current limitation in the start-up phase and when rotor is locked. Diagonal fan for high pressure build-up at low noise. Metal fan housing, impeller of fibre-glass reinforced plastic PA. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 80 g. DV 64 540 37.8 4 6...8 63 7. 40.0 4 300-0...+75 90 000 / 40 000 /;/;/7 DV 648 540 37.8 48 8...60 63 7. 40.0 4 300-0...+75 90 000 / 40 000 /;/ 350 300 50 00 50 00 50 Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 0,4 0,6 0,8,0, (in H O) 0, 0 50 00 50 00 50 300 CFM 00 00 300 400 500 600 m³/h

DC Diagonal Fans Series DV 600 TD TURBOFAN 7 Ø x 5 mm rticularly powerful DC electronic fan with 3 phase EC drive and fully integrated operating electronics. For load-dependent speed control with highly intelligent motor management and power and speed reserves which open up completely new areas of application. Diagonal fan with compression-proof curve and low noise level. With electronic protection against reverse polarity, locked rotor and overloading. Metal fan housing, impeller of fibre-glass reinforced plastic PA. Air exhaust over struts. CCW rotational direction looking at rotor. Electrical connection via leads. AWG, TR 64. Stripped and tinned ends. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 80 g. Voltage Range NEW TYPES Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours DV 64 TD 700 4.0 4 6...36 69 7.8 9.0 5500-0...+60 65 000 DV 648 TD 700 4.0 48 40...55 69 7.8 89.0 5500-0...+60 65 000 min max min max DV 64 TD... DV 648 TD... 00 58.9 9.0 800 4 6...36-0...+60 65 000 700 4.0 69 7.8 9.0 5 500 00 58.9 9.0 800 48 40...55* -0...+60 65 000 700 4.0 69 7.8 89.0 5 500 *Fan with extended voltage range available on request. Models DV 64 TD... and DV 648 TD... are available in customer-specific, custom-developed variants only. The data specified here are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs. 600 500 400 300 00 00 0,4 0,8,,6,0 (in H O) 0 00 00 300 400 nmin 00 00 300 400 500 600 nmax CFM m³/h

DC Axial Fans Series 6400 7 x 50 x 5 mm DC fans with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity and locked rotor; electronic motor current limitation in the start-up phase and when rotor is locked. Metal fan housing, impeller of fibre-glass reinforced plastic PA. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via flat pins 3 x 0.5 mm. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 760 g. Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 64 M 350 06.0 8...5 5 6.0.0 850-0...+7 80 000 / 37 500 644 M 350 06.0 4...3 5 6.0.0 850-0...+7 80 000 / 37 500 644 40 4.3 4...8 57 6.4 8.0 3 400-0...+7 75 000 / 35 000 / 644 H 480 8.5 4...8 63 7. 6.0 4 000-0...+55* 70 000 / 50 000 3 / 6448 M 350 06.0 48 8...60 5 6.0.5 850-0...+7 80 000 / 37 500 6448 40 4.3 48 8...60 57 6.4 7.0 3 400-0...+7 75 000 / 35 000 / 6448 H* 480 8.5 48 8...60 63 7. 6.0 4 000-0...+55** 70 000 / 50 000 3 / VARIOFAN DC fans with temperature-dependent speed control 05 0.7 37 4.9 8.5 700 4 644 T 4...8-0...+7 77 500 / 35 000 40 4.3 57 6.4 8.0 3 400 5 6448 T 05 0.7 37 4.9 8.5 700 4 48 8...60-0...+7 77 500 / 35 000 40 4.3 57 6.4 7.0 3 400 5 75 50 5 00 75 50 5 0, 0, 0,3 0,4 0,5 0,6 (in H O) 3 Voltage Range Service Life L0 30 C 50 C 30 C 50 C * Leads 30 mm. ** 7 C upon request 50 5 00 75 50 5 0, 0, 0,3 0,4 0,5 (in H O) 5 4 30 C 50 C 0 40 80 0 60 00 CFM 00 00 300 m³/h Temperature sensor (NTC-resistor) for controlling the motor speed is positioned directly in the air flow. 0 50 00 50 00 50 00 00 300 400 CFM m³/h

NEW DC Axial Fans Series 6400 TD TURBOFAN 7 x 50 x 5 mm DC electronic fan with 3 phase EC drive and fully integrated operating electronics. For load-dependent speed control with highly intelligent motor management and power and speed reserves which open up completely new areas of application. With electronic protection against reverse polarity, locked rotor and overloading. Metal fan housing, impeller of fibre- glass reinforced plastic PA. Air exhaust over struts. CCW rotational direction looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 760 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours min max min max min max 644 TD... 6448 TD... 6448 TDHH... 90 53.0 8.0 800 4 6...8-0...+60 70 000 / 45 000 600 353. 65 7.4 50.0 5 00 90 53.0 8.0 800 48 40...55* -0...+60 70 000 / 45 000 600 353. 65 7.4 50.0 5 00 90 53.0 8.0 800 48 36...7-0...+60 70 000 / 45 000 900 59.7 78 8.6 63.0 7 500 3 *Fan with extended voltage range available on request. Models 644 TD, 6448 TD... and 6448 TDHH... are available in customer-specific, custom-developed variants only. The data specified here are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs. 800 700 600 500 400 300 00 00 0,4 0,8,,6,0,4,8 (in H O) 3 nmin 0 00 00 300 400 500 50 nmax CFM 300 450 600 750 900 m³/h

DC Diagonal Fans Series DV 6400 7 x 60 x 5 mm DC fans with electronically commutated external rotor motor. Fully int grated commutation electronics. With electronic protection against reverse polarity and locked rotor; electronic motor current limitation during start-up and at locked rotor. Metal fan housing, impeller of fibre-glass reinforced plastic PA. Air exhaust over struts. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads. AWG, TR 64. Stripped and tinned ends. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 80 g. DV 644 530 3.9 4 6...8 65 7.3 40.0 4 300-0...+75 90 000 / 45 000 / DV 6448 530 3.9 48 8...60 65 7.3 40.0 4 300-0...+75 90 000 / 45 000 / 350 300 50 00 50 00 50 Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours 0, 0,4 0,6 0,8,0, (in H O) 0 60 0 80 40 300 00 00 300 400 500 CFM m³/h

NEW TYPES DC Diagonal Fans Series DV 6400 TD TURBOFAN 7 x 60 x 5 mm DC electronic fan with 3 phase EC drive and fully integrated operating electronics. For load-dependent speed control with highly intelligent motor management and power and speed reserves which open up completely new areas of application. With electronic protection against reverse polarity, locked rotor and overloading. Metal fan housing, impeller of fibre- glass reinforced plastic PA. Air exhaust over struts. CCW rotational direction looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads. Housing with ground lug M4 for M4 x 8 screws. 48 V version incl. screws. Mass 80 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours DV 644 TD 680 400. 4 6...8 7 7.9 9.0 5500-0...+60 65 000 min max min max DV 644 TD... DV 6448 TD... 00 58.9 9.0 800 4 6...8-0...+60 65 000 680 400. 7 7.9 9.0 5 500 00 58.9 9.0 800 48 40...55-0...+60 65 000 680 400. 7 7.9 89.0 5 500 Models DV 644 TD... and DV 6448 TD... are available in customer-specific, custom-developed variants only. The data specified here are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs. 600 500 400 300 00 00 0,4 0,8,,6,0 (in H O) 0 00 00 300 nmin 00 00 300 400 500 600 nmax CFM m³/h

DC Diagonal Fans WG 80 Ø 00 x 70 mm Fan housing of die-cast aluminium GDAISi. Impeller of plastic PA 6.6. Polarity and locked-rotor protection, soft start. Blowing over struts. Rotational direction CCW looking at rotor. Mass 800 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours WG 80-AB3-0 900 59.7 4 6...8 68 93.0 4 550-5...+60 4 000 / 40 000 WG 80-AB47-0 95 544.4 48 36...57 69 00.0 4 600-5...+60 4 000 / 40 000 n P ηtl LpA [min - ] [W] [%] [dba] ➀ ❶ 580 33 7 ➀ ➋ 4970 4 70 70 ➀ ➌ 4760 46 67 68 ➀ ➍ 500 40 55 69 ➀ ❶ 4600 00 69 ➀ ➋ 4500 06 70 68 ➀ ➌ 4340 67 66 ➀ ➍ 4550 05 55 67 ➀ ➎ 390 60 66 ➀ ➏ 3790 64 70 65 ➀ ➐ 3660 68 67 63 ➀ ➑ 3790 63 55 63 Connection leads: red = + blue = yellow = control input PWM/Lin white = speed output 700 600 500 400 300 00 00 0,5,0,5,0,5 (in H O) UR UN 4' 4 3' 8 3 7 ' 6 ' 5 0 00 00 300 400 500 CFM 00 400 600 800 m³/h

DC Axial Fans WG 00 5 x 5 x 80 mm Fan housing of die-cast aluminium GDAISi. Impeller of sheet steel, welded onto rotor. Connection leads with terminal strip. Blowing over struts. Rotational direction CCW looking at rotor. Mass 00 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours WG 00-HH77-5 090 64.6 4 6...8 60 55.0 950-5...+60 55 000 / 55 000 WG 00-HH0-5 005 59.5 48 36...57 60 45.0 750-5...+60 57 000 / 57 000 n P ηtl LpA [min - ] [W] [%] [dba] ➀ ❶ 300 73 63 ➀ ➋ 970 77 67 6 ➀ ➌ 300 80 64 63 ➀ ➍ 970 80 54 66 ➀ ❶ 950 55 60 ➀ ➋ 890 58 67 60 ➀ ➌ 800 6 64 6 ➀ ➍ 780 63 54 64 ➀ ➎ 70 7 55 ➀ ➏ 30 8 67 54 ➀ ➐ 70 9 64 54 ➀ ➑ 30 30 54 57 [] 40 00 60 0 80 40 0, 0,4 0,6 0,8 (in H O) UN 8 UR 4' 4 7 6 3 3' ' 5 0 00 400 600 00 400 600 800 000 ' [CFM] m³/h

DC Diagonal Fans WG 08 Ø 3 x 80 mm Fan housing of die-cast aluminium GDAISi. Impeller of plastic PA 6.6. Connection leads with terminal strip (cable exit possible via terminal strip). Blowing over struts. Rotational direction CCW looking at rotor. Mass 300 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours WG 08-BA35-5 050 68.0 4 6...8 74 96.0 3 500-5...+7 5 000 / 40 000 WG 08-BA73-5 050 68.0 48 36...57 74 96.0 3 500-5...+7 5 000 / 40 000 n P ηtl LpA [min - ] [W] [%] [dba] ➀ ❶ 3740 6 75 ➀ ➋ 3500 8 5 74 ➀ ➌ 3450 9 53 73 ➀ ➍ 3530 8 48 75 ➀ ❶ 3500 96 74 ➀ ➋ 3300 99 5 7 ➀ ➌ 350 00 53 7 ➀ ➍ 3330 99 48 73 ➀ ➎ 960 58 70 ➀ ➏ 830 63 5 69 ➀ ➐ 780 64 53 68 ➀ ➑ 840 6 48 70 Connection leads: red = + blue = yellow = control input PWM/Lin white = speed output 50 00 50 00 50 0, 0,4 0,6 0,8 (in H O) UN 8 4 4' 7 UR 3' 3 6 ' 5 ' 0 00 00 300 400 500 600 CFM 00 400 600 800 000 m³/h

EC Axial Fans WG 50 80 x 80 x 80 mm Fan housing of die-cast aluminium. Impeller of sheet steel, welded onto rotor. Connection leads with terminal strip. Blowing over struts. Rotational direction CCW looking at rotor. Mass 500 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt min - C Hours Hours WG 50-HH37-5 90 30. 4 6...8 70 05.0 750-5...+60 57 000 / 46 000 WG 50-HH67-5 90 30. 48 36...57 70 05.0 750-5...+60 57 000 / 46 000 n P ηtl LpA [min - ] [W] [%] [dba] ➀ ❶ 90 9 7 ➀ ➋ 800 3 63 7 ➀ ➌ 680 35 60 7 ➀ ➍ 600 39 45 7 ➀ ❶ 750 05 70 ➀ ➋ 630 0 63 69 ➀ ➌ 50 60 69 ➀ ➍ 440 4 45 70 ➀ ➎ 60 73 66 ➀ ➏ 30 75 63 67 ➀ ➐ 30 78 60 67 ➀ ➑ 70 80 45 68 [] 00 60 0 80 40 0, 0,4 0,6 0,8 (in H O) UN UR 8 4 4' 7 3' 3 6 ' 0 400 800 400 800 00 600 5 ' [CFM] m³/h

DC Radial Fans Series RV 40 05 x 59 x 79 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. Spiral housing and blower wheel of fibreglass reinforced plastic. Radial air exhaust through housing port. Electrical connection via leads AWG 6, TR 64. Stripped and tinned ends. Mass 00 g. Voltage Range Schallleistung Service Life L0 L0 Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RV 40-8/ L 8 0.6 9...6 4.0.0 3 900-0...+70 70 000 / 35 000 RV 40-8/ H 4 4. 9...6 5.0 4.5 4 800-0...+70 50 000 / 5 000 Ø 30 Ø 3 8,3 4, (x) 5 00 75 50 5 0, 0, 0,3 0,4 (in H O) Ø 46,5 8,35 0,5 Air Intakel Ø 40 60,4 7 45,78 4,04 0 3 6 9 5 5 0 5 0 5 CFM m³/h 36,35 58,85,5 44,9 3,4

DC Radial Fans Series RLF 35 5 x 5 x 5 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. Low noise thanks to special design of spiral housing. With electronic protection against reverse polarity and overloading. Fan of fibreglass reinforced plastic. Housing PBT. Impeller of PA. Radial air exhaust through housing port. Electrical connection via leads AWG 6, TR 64. Stripped and tinned ends. Mass 40 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RLF 35-8/ N 9.6 5.7 9...4 5.5 3.5 7 00-0...+70 60 000 / 30 000 RLF 35-8/4 N 9.6 5.7 4 4...8 5.5 4.3 7 00-0...+70 60 000 / 30 000 75 50 5 00 75 50 5 0, 0, 0,3 0,4 0,5 0,6 (in H O) 0 3 4 5 6 7 4 6 8 0 CFM m³/h

DC Radial Fans Series RL 48 76 x 76 x 7 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. Low noise thanks to special design of spiral housing. With electronic protection against reverse polarity and overloading. Spiral housing and blower wheel of fibreglass reinforced plastic. Radial air exhaust through housing port. Electrical connection via leads AWG 6, TR 64. Stripped and tinned ends. Mass 75 g. Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RL 48-9/ ML.9 8...5.0 5.3.9 3 500-0...+70 70 000 / 35 000 RL 48-9/ 8 6.5 8...3.5 5.7 5.0 4 400-0...+70 60 000 / 30 000 / RL 48-9/4 ML.9 4 8...8.0 5.3.9 3 500-0...+70 70 000 / 35 000 RL 48-9/4 8 6.5 4 8...6.4 5.7 5.0 4 400-0...+70 60 000 / 30 000 / 5 00 75 50 5 Voltage Range Service Life L0 0, 0, 0,3 0,4 (in H O) 0 3 6 9 5 5 0 5 0 5 CFM m³/h

DC Radial Fans Series RL 65 97 x 93.5 x 33 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. Low noise thanks to special design of spiral housing. With electronic protection against reverse polarity and overloading. Spiral housing and blower wheel of fibreglass reinforced plastic. Integrated snap-in fins for easy assembly. Radial air exhaust through housing port. Electrical connection via leads AWG 6, TR 64. Stripped and tinned ends. Mass 70 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RL 65-/ 56 33 6.8 3.8 6.6 5.0 4 500-0 +70 60 000 / 30 000 / RL 65-/H 6 35.9 6.8...3. 6.8 9. 4 900-0...+55 55 000/ 37 500 RL 65-/4 56 33 4...6.4 6.6 4.0 4 500-0 +70 60 000 / 30 000 RL 65-/4H 6 35.9 4...6.4 6.8 8.0 4 900-0...+60 55 000/ 35 000 400 300 00 00 NEW TYPES Snap-in fins for easy assembly 0,4 0,8,,6 (in H O) 0 0 0 30 CFM 0 0 30 40 50 60 m³/h

DC Radial Fans Series RL 90 N x x 37 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading via PTCresistor; partially impedance protected. Spiral housing and blower wheel of fibreglass reinforced plastic. Housing base of galvanised steel plate. Radial air exhaust through housing port. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 40 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RL 90-8/ NG 40 3.5 7...5 5.8 5.5 500-0...+75 6 500 / 7 500 RL 90-8/ N 40 3.5 7...5 5.8 5.5 500-30...+75 6 500 / 7 500 / RL 90-8/4 NG 40 3.5 4...8 5.8 5.0 500-0...+75 6 500 / 7 500 RL 90-8/4 N 40 3.5 4...8 5.8 5.0 500-30...+75 6 500 / 7 500 / RL 90-8/8 NH 55 3.4 48 40...53 6.9 5.0 3 500-30...+55 3 500 / 500 00 75 50 5 00 75 50 5 0, 0,4 0,6 0,8 (in H O) 0 5 0 5 0 5 30 0 0 30 40 50 CFM m³/h + 6 +0 30 +0, 97 7,4 45,5 60,3 3,5 00,8 +0,,7 +0, 0,6 57,6 +0, 80 04,8 0,6 4, +0,4, 54 * 37+0, 6,5 5,5 3 + _ 0,3 0,5 *Speed nut M4 or 8-3UNC. Screw- in depth max.,5 min 9,0 +0,3 +0,4 6 67,4

DC Radial Fans Series RLF 00 7 x 7 x 5 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. Extremely flat and powerful radial fan. With electronic protection against reverse polarity, locked rotor and overloading. Housing and blower wheel of fibreglass reinforced plastic. Radial direction of flow, direction of motor as seen from right. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 30 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RLF 00-/ 64 37.7 8...5 6.4 8.0 5 00-0...+75 80 000 / 30 000 / RLF 00-/4 64 37.7 4 6..30 6.4 8.0 5 00-0...+75 80 000 / 30 000 /9 RLF 00-/8 64 37.7 48 36..60 6.4 8.6 5 00-0...+75 80 000 / 30 000 400 300 00 00 0,4 0,8,,6 (in H O) 0 7 4 8 35 0 0 30 40 50 60 CFM m³/h

DC Radial Fans Series RG 90 N 35 x 35 x 38 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading via PTCresistor; partially impedance protected. Spiral housing and blower wheel of fibreglass reinforced plastic. Housing base of galvanised steel plate. 48 V Type: flat pin 6.3 x 0.8 mm for grounding wire. Radial air exhaust through housing port. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 440 g. Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RG 90-8/ NG 55 3.4 7...5 5.5 6.0 00-0...+75 6 500 / 7 500 RG 90-8/ N 55 3.4 7...5 5.5 6.0 00-30...+75 6 500 / 7 500 / RG 90-8/4 NG 55 3.4 4...8 5.5 5.5 00-0...+75 6 500 / 7 500 RG 90-8/4 N 55 3.4 4...8 5.5 5.5 00-30...+75 6 500 / 7 500 / RG 90-8/8 N 55 3.4 48 36...56 5.5 5.5 00-30...+75 6 500 / 7 500 00 80 60 40 0 0, 0, 0,3 (in H O) Voltage Range Service Life L0 0 5 0 5 0 5 30 0 0 30 40 50 CFM m³/h

DC Radial Fans Series RG 5 N 80 x 80 x 40 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading via PTCresistor; partially impedance protected. Spiral housing and blower wheel of fibreglass reinforced plastic. Housing base of galvanised steel plate. 48 V Type: flat pin 6.3 x 0.8 mm for grounding wire. Radial air exhaust through housing port. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 730 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RG 5-9/ NM 60.0 35.3 7...5 4.8.0 750-30...+75 70 000 / 30 000 RG 5-9/ N 87.5 5.5 7...5 5.8 5.0 550-30...+75 6 500 / 7 500 /; / RG 5-9/4 NM 60.0 35.3 4...8 4.8.0 750-30...+75 70 000 / 30 000 RG 5-9/4 N 87.5 5.5 4...8 5.8 5.0 550-30...+75 6 500 / 7 500 / RG 5-9/8 N 87.5 5.5 48 36...56 5.8 5.0 550-30...+75 6 500 / 7 500 / 50 5 00 75 50 5 0, 0, 0,3 0,4 0,5 (in H O) 0 0 0 30 40 50 0 40 60 80 CFM m³/h

DC Radial Fans Series RG 60 N 0 x 0 x 56 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading. Spiral housing and blower wheel of fibreglass reinforced plastic. Housing base of galvanised steel plate. 48 V Type: flat pin 6.3 x 0.8 mm for grounding wire. Radial air exhaust through housing port. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 400 g. Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RG 60-8/ NM 39 8.8 7...4 5.6 7.5 900-0...+70 80 000 / 40 000 RG 60-8/ N 09 3.0 7.5...4 6.6.0 850-0...+70 70 000 / 35 000 / RG 60-8/4 NM 39 8.8 4...8 5.6 7.0 900-0...+70 80 000 / 40 000 RG 60-8/4 N 09 3.0 4...8 6.6 0.0 850-0...+70 70 000 / 35 000 / RG 60-8/8 N 09 3.0 48 8...60 6.6 0.0 850-0...+70 70 000 / 35 000 / 350 300 50 00 50 00 50 Voltage Range Service Life L0 0, 0,4 0,6 0,8,0, (in H O) 0 0 40 60 80 5 50 75 00 5 50 CFM m³/h

NEW TYPES DC Radial Fans Series RG 60 NTD TURBOFAN 0 x 0 x 56 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics with electronic protection against reverse polarity, locked rotor and overloading. Spiral housing and blower wheel of fibreglass reinforced plastic. Housing base of galvanised steel plate. Radial air exhaust through housing port. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. 48 V Type: flat pin 6.3 x 0.8 mm for grounding wire. Mass 400 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RG 60-8/4 NTD 308 8.3 4 6...8 7.5 64.0 4 00-0...+60 55 000 / 35 000 RG 60-8/4 NTDH 370 7.8 4 6...8 7.8 0.0 5 000-0...+60 50 000 / 3 500 3 min. max. min. max. RG 60-8/4 NTD... RG 60-8/8 NTD... 59 34.7.0 800 4 6...8-0...+60 55 000 / 7 500 308 8.3 7.5 64.0 4 00 59 34.7.0 800 48 38...57-0...+70 55 000 / 7 500 308 8.3 7.5 59.0 4 00 Models RG 60-8/4 NTD... and RG 60-8/8 NTD... are available in customer-specific, custom-developed variants only. The data specified here are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs. 600 500 400 300 00 00 0,4 0,8,,6,0,4 (in H O) 000 800 600 400 00,6,4 3, 0,8 (in H O) 0 3 50 00 50 00 00 300 CFM m³/h nmin nmax 0 30 60 90 0 50 CFM 50 00 50 00 50 m³/h

NEW TYPES DC Radial Fans Series REF 00 00 Ø x 5 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. Extremely flat and powerful radial fan. With electronic protection against reverse polarity, locked rotor and overloading. Blower wheel of fibreglass reinforced plastic. Air exhaust radial. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 60 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours REF 00-/ 86 50.6 8...5 6.3 7.5 5 400-0...+75 80 000 / 30 000 / REF 00-/4 86 50.6 4 6...30 6.3 7.5 5 400-0...+75 80 000 / 30 000 / REF 00-/8 86 50.6 48 36...60 6.3 7.5 5 400-0...+75 80 000 / 30 000 / REF 00-/8 H 04 6. 48 36...56 6.9 4.8 6 700-0...+70 67 500 / 30 000 R 3,5 Air flow The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 7 x 7 mm. Cover plate 7 x 7 mm with an air-inlet of Ø 70 mm, concentric to the blower wheel. Air flow mm 4,9 + - 0,3 500 400 300 00 00 0,4 0,8,,6 (in H O) 5,7 O 7 O 56 + - 0,3,4 + - 0,4 0 0 0 30 40 50 0 40 60 80 00 CFM m³/h M 4 (4x) 6 deep

DC Radial Fans Series RER 0 0 Ø x 5 mm DC radial blower with electronically commutated external rotor motor. With integrated programmable motor and drive electronics. Highly adaptable software configuration enables a tailor-made solution to the specific requirements of your application. With electronic protection against reverse polarity and locked rotor. Blower wheel of fibreglass reinforced plastic. Air exhaust radial. Rotational direction CW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via 4 leads AWG, TR 64. Stripped and tinned ends. Mass 305 g. Voltage Range Service Life L0 NEW TYPE Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RER 0-36/4NHH 90.8 4 8...7. 7. 0 5 900-0...+70 60 000 / 30 000 /9 RER 0-36/8NHH 90.8 48 43...5.0 7. 9 5 900-0...+70 60 000 / 30 000 /9 V DC Type on request. R 7 Air flow The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 48 x 48 mm. Cover plate 48 x 48 mm with an air-inlet of Ø 66 mm, concentric to the blower wheel. Air flow mm 36,65 400 300 00 00 0,5,0,5 (in H O) 0 0 40 60 80 00 5 50 75 00 5 50 CFM m³/h + - 0, O 60 M 4 (3x) 0 deep 5,8 7, 8, 50,5 5,7 + - 0, + - 0, + - 0, + - 0, + - 0,

DC Radial Fans Series RER 5 N 38 Ø x 35 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading. Blower wheel of fibreglass reinforced plastic, with steel plate reinforced. Air exhaust radial. Rotational direction CW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 30 g. Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RER 5-9/ N 0 64.7 7...5 5.7 4.5 650-30...+75 6 500 / 7 500 / RER 5-9/4 NM 74 43.6 4...8 4.8.0 750-30...+75 6 500 / 7 500 RER 5-9/4 N 0 64.7 4...8 5.7 4.5 650-30...+75 6 500 / 7 500 / RER 5-9/8 N 0 64.7 48 36...56 5.7 5.0 650-30...+75 6 500 / 7 500 90 80 70 60 50 40 30 0 0, 0, 0,3 (in H O) ø56 ø47 M4 (x) +0 4 4 5 deep 35 30,7 9 +0,5 +0,3 ø5 0 Voltage Range Service Life L0 R5 Air flow The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 0 x 0 mm. Cover plate 0 x 0 mm with an air-inlet of Ø 86 mm, concentric to the blower wheel. Air flow 400 mm 0 0 0 30 40 50 60 0 40 60 80 00 CFM m³/h + 6

DC Radial Fans Series RER 60 N 65 Ø x 5 mm DC radial blower with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading. Blower wheel of fibreglass reinforced plastic. Air exhaust radial. Rotational direction CCW looking at rotor. Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 590 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours RER 60-8/ N 55 50. 7...4 6.4 9.0 3 000-0...+70 75 000 / 35 000 / RER 60-8/4 N 55 50. 4...8 6.4 9.0 3 000-0...+70 75 000 / 35 000 RER 60-8/8 N 55 50. 48 8...60 6.4 9.0 3 000-0...+70 75 000 / 35 000 / + 0 6 + 00 50 00 50 R5 Air flow The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 60 x 60 mm. Cover plate 60 x 60 mm with an air-inlet of Ø 00 mm, concentric to the blower wheel. Air flow mm 0, 0,4 0,6 0,8 (in H O) 0 0 40 60 80 00 0 50 00 50 00 CFM m³/h 50,3 + 0,7 45 +0, + 0,3 ø58 ø7 M4 (4x) 6, + 0,8 + 0,5 ø60 max. 8 deep

NEW TYPE DC Radial Fans Series RER 60 NTD TURBOFAN 65 Ø x 5 mm DC electronic radial blower with 3 phase EC drive and fully integrated operation electronics. For load-dependend speed control with highly intelligent motor management and power and speed reserves which open up completely new areas of application. With electronic protection against reverse polarity, locked rotor and overloading. Blower wheel of fibreglass reinforced plastic. Air exhaust radial. Rotational direction CCW looking at rotor. Electrical connection via leads AWG, TR 64. Stripped and tinned ends. Mass 590 g. Voltage Range + 0 6 + Service Life L0 Type m 3 /h CFM V DC V DC Bel / Watt min - C Hours Hours min. max. RER 60-8/8 NTD... 66 38.8.0 800 48 38...57-0...+70 55 000 / 7 500 354 08.4 7.4 43.0 4 00 Model RER 60-8/8 NTD... is available in customer-specific, custom-developed variant only. The data specified here are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control input.s. R5 Air flow The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 60 x 60 mm. Cover plate 60 x 60 mm with an air-inlet of Ø 00 mm, concentric to the blower wheel. Air flow mm 500 400 300 00 00 0,4 0,8,,6 (in H O) nmin 0 50 50 00 nmax 00 50 CFM 50 00 50 m³/h 50,3 + 0,7 45 +0, + 0,3 ø58 ø7 M4 (4x) 6, + 0,8 + 0,5 ø60 max. 8 deep

DC Cross-Flow Fans Series QG 030 00...45 x 50 x 48 mm DC blower with electronically commutated external rotor motor. Fully integrated commutation electronics. With electronic protection against reverse polarity, locked rotor and overloading by PTC-resistor; partially impedance protected. Motor with ball bearing system. Blower wheel mounting plate with sleeve bearings. Fan blower where and air duct housing of aluminium. Plastic flanges. Rotational direction CW looking at rotor. Air exhaust through housing port. Electrical connection via leads. Stripped and tinned ends. Mass 35/ 90/ 380/ 45 g. Voltage Range Service Life L0 Type m 3 /h CFM V DC V DC db(a) Bel / Watt C Hours Hours QG 030-48/ 75 44. 8...4 49 5.7 / 6. -0...+60 30 000 / 0 000 QG 030-98/ 00 58.9 8...4 5 5.8 / 8.0-0...+60 30 000 / 0 000 QG 030-303/ 40 8.4 8...4 5 5.8 / 8.7-0...+60 30 000 / 0 000 3 QG 030-353/ 55 9. 8...4 5 5.9 / 9.6-0...+60 30 000 / 0 000 4 QG 030-48/4 75 44. 4 6...8 49 5.7 / 6. -0...+60 30 000 / 0 000 QG 030-98/4 00 58.9 4 6...8 5 5.8 / 8.0-0...+60 30 000 / 0 000 QG 030-303/4 40 8.4 4 6...8 5 5.8 / 8.7-0...+60 30 000 / 0 000 3 QG 030-353/4 55 9. 4 6...8 5 5.9 / 9.6-0...+60 30 000 / 0 000 4 Previous ebm designations: QG 030-EA -0 < QG 030-48/ QG 030-GC 0-0 < QG 030-98/ QG 030-FB 0-0 < QG 030-303/ QG 030-ID 0-0 < QG 030-353/ QG 030-EA 9-0 < QG 030-48/4 QG 030-GC 03-0 < QG 030-98/4 QG 030-FB 03-0 < QG 030-303/4 QG 030-ID 03-0 < QG 030-353/4 Type Dimension: L L QG 030-48/.. 0 +.5 48 QG 030-98/.. 58 +.5 98 QG 030-303/.. 363 +.5 303 QG 030-353/.. 43 +.5 353 The service life values refer to horizontal installation of the blower. Cross-flow fans are only suitable for operation with high rate and low counterpressure. 50 50 40 30 0 0 0,05 0,0 0,5 (in H O) 47,5 6 38,4 Ø,3 (8x) 3, 300 ±0 Ø9 0 5,4 ±0,7 L 0 +0,3 Ø4 Ø35, 3 4 6,5,5 L 0 5 30 45 60 75 0 40 60 80 00 0 CFM m³/h 0 34,4 Cutout for squarenut M3 DIN 56-flat (6x)

DC Fans with Added Features Sensor signal 84 Alarm signal 88 Vario-Pro / Speed setting 93 / 94 Protection against ambient influences 96 AC Radial Fans AC Axial Fans ACmaxx Axial Fans Technology DC Axial Fans DC Radial Fans 8 Accessories

DC Fans Technical Information Cooling capacity and efficiency Greater power density, increasing miniaturization and extreme electronic component density are posing increased demands on the cooling capacity and efficiency of fans. The intelligent and space-saving integration of the fan in the appliance configuration is therefore of major importance: Tailor-made cooling adapted to the situation as and when required. Programmable cooling by defining speed profiles. Transparency of function thanks to complete, interactive monitoring in all operating conditions. ebm-papst provides intelligent cooling concepts which are optimally adapted to requirements. For example:. Speed adaptation via NTC sensor Standard fans in electronic cooling millionfold tried and tested and nevertheless a temporary solution because standard fans have a distinct disadvantage: With constant speed and a corresponding high noise factor they continuously provide the airflow required in extreme cases. This extreme case only occurs, if it occurs at all, for a fraction of the service life. What is needed is the intelligent fan that automatically adapts to the current cooling requirements. The ebmpapst answer: A complete range of DC fans with temperature-controlled speed adaptation - in all standard dimensions. Installation is simple. The control electronics receive their thermal information for speed adaptation steplessly and loss-free via a temperature sensor either externally via a single lead, positioned as required, or internally directly in the fan hub in the airflow.. DC fans with separate control input Speed control is also possible with DC fans that have a separate control input. A variation in speed can thus be realized via a control voltage or a pulse-width modulated signal. These possibilities are used above all in devices that have appropriate standard interfaces and thus require a load-dependent variation of the fans. 8

DC Fans Technology Fans with TD motor Programmable fans Vario-Pro Fans with sensor signal Fans with alarm signal DC Axial Fans Technical Information 3. Sensor signal DC fans with sensor signal. The integrated electronic tacho continuously provides an actual speed signal for external evaluation. The user is informed at all times of the current fan speed via an extremely simple signal evaluation by the customer. The sensor signal is via a separate lead. 4. Alarm signal For applications which require monitored fan operation with alarm signal, ebm-papst has numerous alarm signal versions, either a static, pre-processed or interface-compatible long-or short-term signal depending on the type of fan. 5. Turbo drives Fans with three-phase EC drives and fully integrated operating electronics. These three-phase motors whose torque is virtually non-reliant on the rotor position are used for extremely high power. These motors can also be operated in both directions of rotation so that in special cases reverse operation of the fans can be realized. 6. Vario-Pro fans This High-end fan concept by ebmpapst with programmed intelligence and customer-specific integrated functions makes your electronic cooling even more variable and competitive. Vario- Pro ensures fresh impetus as far as economy is concerned for all demanding cooling tasks e.g. where reliability, more flexibility and intelligent function features such as alarm function, speed control etc. are required. The successful concept of Vario-Pro is: Tailormade software instead of a fixed hardware because programmed software modules for motor control and application intelligence are responsible for the work that analogue components were responsible for in the past. This central control unit of the Vario-Pro comprises of a microcontroller and an EEPROM, on which all characteristics are stored. 7. Protection against environmental influences Some applications are demanding on the fans' resistance to ambient influences, such as dust, humidity, water and salt. ebm-papst offer solutions for adapting fans to various ambient conditions. AC Axial Fans ACmaxx Axial Fans DC Radial Fans AC Radial Fans 83 Accessories

Sensor signal / tacho Speed-proportional rectangular pulse for external speed monitoring of fan motor pulses per revolution / 6 pulses per revolution with TURBOFANS. Open-Collector signal output Extremely wide operating voltage range (5... 60 V) Easy adaptation to user interface Connection via separate lead The sensor signal also serves as a major comparison variable for setting and maintaining the desired speed for interactive or controlled cooling with one or several interconnected fans. Electrical connection Fan Customer (+) Power UB UB Signal data Sensor signal US Low Condition: Isink Sensor signal US High Condition: Isource Sensor operating voltage UBS Perm. sink current Isink max. Fan description +UBS Type V DC ma V DC ma V DC ma ge output 50 0.4 30 0 30 9 Isink (-) Power US 400 F 0.4 30 0 30 0 400 0.4 30 0 30 4 J 0.4 30 0 30 4 44 J 0.4 30 0 30 4 All voltages measured to ground. External load resistance Ra / US / UBS required. 500 F 0.4 30 0 30 3 600 F 0.4 30 0 30 4 60 0.4 30 0 30 4 5 600 N 0.4 30 0 30 4 6 600 J 0.4 30 0 30 4 8 Signal output voltage all modells except TD-Fans 700 F 0.4 30 0 30 4 9 8400 N 0.4 8 0 8 4 30 Us s t US Low t Rotation US High Pulse / Rotation Signal Frequenzy [F]= x n/60 Hz t 8300 0.4 30 0 30 4 3 800 J 0.4 30 0 30 4 33 3400 N 0.4 8 0 8 4 34 3300 0.4 30 0 30 4 36 300 J 0.4 30 0 30 4 37 4400 F 0.4 30 0 30 4 39 4300 N 0.4 30 0 30 4 40 4300 0.4 30 0 30 4 4 Us only TD-Fans US High 4400 0.4 30 0 30 4 43 4 0.4 30 0 30 4 44 44 0.4 30 0 4 30 4 44 48 0.4 30 0 4 30 4 44 n t US Low t Rotation 6 Pulse / Rotation Signal Frequenzy [F]= 6 x n/60 Hz Fan speed nmin nmax t t 400 N 0.4 30 0 4 30 4 45/46 DV 400 0.4 30 0 30 4 47 500 N 0.4 30 0 4 30 4 48 DV 500 0.4 30 0 30 4 49 5 N 0.4 5 0 5 0 50 54 N 0.4 60 0 60 0 50 58 N 0.4 60 0 60 0 50 7 N 0.4 60 0 60 0 5 74 N 0.4 30 0 30 0 5 78 N 0.4 60 0 60 0 5 84

Technology Available on request: Galvanically separated sensor signal circuit Varying voltage potentials for power and logic circuit. DC Axial Fans Signal data Sensor signal US Low Condition: Isink Sensor signal DC Radial Fans Type V DC ma V DC ma V DC ma ge 64 N 0.4 8 30 0 30 0 53 648 N 0.4 8 60 0 30 0 53 DV 600 0.4 30 0 60 0 55 6400 0.4 60 0 60 0 57 RL 48 0.4 8 0 4 30 4 67 RL 65 0.4 30 0 30 4 68 RL 90 N 0.4 30 0 30 4 69 RLF 00 0.4 30 0 30 4 70 RG 90 N 0.4 30 0 30 4 7 RG 5 N 0.4 30 0 30 4 7 RG 60 N 0.4 30 0 30 0 73 REF 00 0.4 30 0 30 4 75 ACmaxx Axial Fans AC Radial Fans AC Axial Fans US High Condition: Isource Sensor operating voltage UBS Perm. sink current Isink max. Fan description Attention: With these fan options, deviations in regard to temperature range, voltage range and power consumption are possible compared with standard fan data. 85 Accessories

Sensor signal / tacho Speed-proportional rectangular pulse for external speed monitoring of fan motor pulses per revolution / 6 pulses per revolution with TURBOFANS. TTL-compatible Integrated pull-up resistor Connection via separate lead The sensor signal also serves as a major comparison variable for setting and maintaining the desired speed for interactive or controlled cooling with one or more interconnected fans. Electrical connection Fan Customer (+) Power output UB Signal data Sensor signal US Low Condition: Isink Sensor signal US High Condition: Isource Perm. sink current Isink max. Fan description US Type V DC ma V DC ma ma ge (-) Power 64 N/ GM 0.4.5 5.5 6 All voltages measured to ground. 68 N/ N 0.4.5 5.5 6 84 N/ H 0.4.5 5.5 30 83 / 0.4.5 5.5 3 834 / 0.4.5 5.5 3 838 / HL 0.4.5 5.5 3 Signal output voltage all modells except TD-Fans 838 / H 0.4.5 5.5 3 44 F/ GM 0.4.5 5.5 38 Us US High 444 F/ 0.4.5 5.5 38 s US Low t 448 F/ 0.4.5 5.5 38 43 / M 0.4.5 5.5 4 t t Rotation Pulse / Rotation Signal Frequenzy [F]= x n/60 Hz 434 / 0.4.5 5.5 4 438 / 0.4.5 5.5 4 4 / 0.4.5 5.5 44 4 / H 0.4.5 5.5 44 Us only TD-Fans US High 44 / 0.4.5 5.5 44 44 / H 0.4.5 5.5 44 48 / 0.4.5 5.5 44 US Low t 48 / H 0.4.5 5.5 44 t t 48 N/ X 0.4.5 5.5 45 Rotation 6 Pulse / Rotation Signal Frequenzy [F]= 6 x n/60 Hz 488 N/ XM 0.4.5 5.5 45 54 N/ H 0.4.5 5.5 48 n Fan speed nmin nmax t Attention: With these fan options, deviations in regard to temperature range, voltage range and power consumption are possible compared with standard fan data. 86

DC Axial Fans Technology Available on request: Galvanically separated sensor and signal circuit Varying voltage potentials for power and logic circuit. Signal data Sensor signal US Low Condition: Isink Sensor signal US High Condition: Isource Perm. sink current Isink max. Fan description DC Radial Fans Type V DC ma V DC ma ma ge 58 N/ 0.4.5 5.5 0 50 54 N/ H 0.4.5 5.5 48 78 N/ 0.4.5 5.5 0 5 74 N/ 0.4.5 5.5 0 5 64 N/ M 0.4.5 5.5 0 53 64 N/ 0.4.5 5.5 0 53 648 N/ 0.4.5 5.5 0 53 DV 64 / 0.4 4.5 5.5 55 DV 648 / 0.4 4.5 5.5 55 644 / H 0.4.5 5.5 0 57 DV 644 / 0.4 4.5 5.5 59 DV 6448 / 0.4 4.5 5.5 59 ACmaxx Axial Fans RG 5-9/N/ 0.4.5 5.5 7 RG 60-8/N/ 0.4.5 5.5 5 73 RG 60-8/8N/ 0.4.5 5.5 0 73 RER 5-9/N/ 0.4.5 5.5 77 RER 60-8/N/ 0.4.5 5.5 5 78 AC Axial Fans Attention: With these fan options, deviations in regard to temperature range, voltage range and power consumption are possible compared with standard fan data. AC Radial Fans 87 Accessories

Alarm signal /7 Alarm signal for speed monitoring Signal output via open collector The fan emits a high continuous signal during trouble-free operation within the permissible voltage range Low signal when speed limit is not reached. After elimination of fault, the fan returns to its desired speed; the alarm signal reverts to high Alarm signal-data Alarm output voltage UA Low Condition: Condition: Isink = Alarm output voltage UA High Condition: Condition: Isource Alarm operating voltage UBA max. Max. permissible sink current Alarm delay time t Condition: Speed limit ng Type V DC ma V DC ma V DC ma S min 838 /7 0.4 n < ng UBS n > ng 0 60 0 5 * 500 ± 00 838 /7 H 0.4 n < ng UBS n > ng 0 60 0 5 * 500 ± 00 33 /7 0.4 n < ng UBS n > ng 0 60 0 5 * 500 ± 00 334 /7 0.4 n < ng UBS n > ng 0 60 0 5 * 500 ± 00 338 /7 H 0.4 n < ng UBS n > ng 0 60 0 5 * 500 ± 00 438 /7 M 0.4 n < ng UBS n > ng 0 60 0 5 * 50 ± 00 438 /7 0.4 n < ng UBS n > ng 0 60 0 5 * 850 ± 00 44 /7 0.4 n < ng UBS n > ng 0 60 0 5 * 50 ± 00 484 N /7X 0.4 n < ng UBS n > ng 0 60 0 5 * 500 ± 00 Attention: With these fan specials, deviations as regards temperature range, voltage range and power consumption are possible compared with standard fans. * After switching on UB Electrical connection Fan Customer (+) Power UB UB U B Supply Voltage t Isink output US +UBS n G n t Speed n>n G locked n=0min - n>n G n<n G*) n>n G t (-) Power U A Alarm Signal U AHigh=UBA U ALow t All voltages measured to ground. External load resistance Ra from UA to UBA required. With VARIOFANs with external temperature sensor for controlling the motor speed, the NTC sensor is not included in the scope of delivery. Temperature sensor LZ 370, see Accessories. t = Alarm signal suppression during start-up * n < speed limit ng by braking or blocking.

DC Axial Fans Technology Available on request: With integrated signal latching for subsequent recognition of short-time faults Alarm circuit open collector or TTL Galvanically isolated for maximum device safety; Defects in the power circuit do not affect the alarm circuit. Alarm signal-data Alarm outputvoltage UA Low Condition: Condition: Isink = Alarm outputvoltage UA High Condition: Condition: Isource = Alarm operating voltage UBA max. Max. permissible sink current Alarm delay time t Condition: Speed limit ng Fan description DC Radial Fans Type V DC ma V DC ma V DC ma S min ge 43/7 MV 0.4 n < ng 60 n > ng 0 60 0 5 * 500 ± 00 4 VARIOFAN 43/7 V 0.4 n < ng 60 n > ng 0 60 0 5 * 500 ± 00 4 VARIOFAN 434/7 V 0.4 n < ng 60 n > ng 0 60 0 5 * 50 ± 00 4 VARIOFAN 438/7 V 0.4 n < ng 60 n > ng 0 60 0 5 * 850 ± 00 4 VARIOFAN 5 N/7 0.4 n < ng 60 n > ng 0 60 0 5 * 50 ± 50 50 74 N/7 0.4 n < ng 60 n > ng 0 60 5 5 * 330 ± 60 5 DV 64/7 0.4 n < ng 60 8 n > ng 0 60 0 0 ± 4 * 900 ± 00 55 Attention: With these fan specials, deviations as regards temperature range, voltage range and power consumption are possible compared with standard fans. * After switching on 89 Accessories AC Radial Fans AC Axial Fans ACmaxx Axial Fans

Alarm signal /9 Alarm signal for speed monitoring Signal output via open collector The fan emits a low continuous signal during trouble-free opera tion within the permissible voltage range. High signal when speed limit is not reached. After elimination of fault, the fan returns to its desired speed; the alarm signal reverts to low. Alarm signal-data Alarm outputvoltage UA Low Condition: Condition: Isink = Alarm outputvoltage UA High Condition: Condition: Isource = Alarm operating voltage UBA max. Max. permissible sink current Alarm delay time t Condition: Speed limit ng Type V DC ma V DC ma V DC ma S min 834 /9 H 0.4 n > ng 60 n < ng 0 60 0 5 * 500 ± 00 43 /9 0.4 n > ng 60 n < ng 0 60 0 5 * 500 ± 00 74 N /9 0.4 n > ng 60 n < ng 0 4.5 60 0 0 ± 4 * 800 ± 0 64 N /9 0.4 n > ng 8 n < ng 0 6 8 0 0 ± 4 * 900 ± 00 RLF00-/4 /9 0.4 n > ng 8 n < ng 0 6 8 0 0 ± 4 * 900 ± 00 RER0-36/8N /9 H 0.4 n > ng 8 n < ng 0 6 8 0 0 ± 4 * 900 ± 00 Attention: * After switching on UB With these fan specials, deviations as regards temperature range, voltage range and power consumption are possible compared with standard fans. Available on request: With integrated signal latching for subsequent recognition of short-term faults Alarm circuit open collector or TTL Galvanically separated for max. device safety; defects in power circuit have no effect on the alarm circuit. Electrical connection U B Supply Voltage Fan Customer (+) Power UB t UB Isink output US +UBS n G t n>n G Speed locked n=0min - n>n G n<ng*) n>n G t (-) Power U A Alarm Signal U AHigh=UBA U ALow t All voltages measured to ground. External load resistance Ra from UA to UBA required. t = Alarm signal suppression during start-up * n < Speed limit ng by braking or blocking.

Alarm signal /37 Technology Alarm signal for speed monitoring Signal output for open collector The fan emits a high continuous signal during trouble-free operation within the permissible voltage range. Low signal when speed limit is not reached After elimination of fault, the fan returns to its desired speed; the alarm signal reverts to high. Available on request: Alarm circuit TTL compatible DC Axial Fans Alarm signal-data Alarm outputvoltage UA Low Condition: Condition: Isink = Alarm outputvoltage UA High Condition: Condition: Isource = Alarm operating voltage UBA max. Max. permissible sink current Isink Alarm delay time t Condition: Speed limit ng Fan description DC Radial Fans Type V DC ma V DC ma V DC ma S min ge 6 N/37 GNV 0.4 n ng 8 n > ng 0 8 0 < * 0 7 84 N/37 GMLV 0.4 n ng 8 n > ng 0 8 0 < * 0 3 34 N/37 GMV 0.4 n ng 8 n > ng 0 8 0 < * 0 34 34 N/37 GV 0.4 n ng 8 n > ng 0 8 0 < * 0 34 Attention: With these fan specials, deviations as regards temperature range, voltage range and power consumption are possible compared with standard fans. * After switching on UB ACmaxx Axial Fans Electrical connection Fan Customer (+) Power UB U B Supply Voltage t AC Axial Fans UB +UBS n t n>n G Speed n>n G Isink output (-) Power US U A U AHigh *) locked n=0min - Alarm Signal U ALow t t AC Radial Fans All voltages measured to ground External load resistance Ra from UA to UBA required. t = Alarm signal suppression during start-up * n < Speed limit ng by braking or blocking. 9 Accessories

Alarm signal /39 Alarm signal for speed monitoring Signal output via open collector The fan emits a low continuous signal during trouble-free operation within the permissible voltage range. High signal when speed limit is not reached. After elimination of fault, the fan returns to its desired speed; the alarm signal reverts to low. Alarm signal-data Alarm outputvoltage UA Low Condition: Condition: Isink = Alarm outputvoltage UA High Condition: Type V DC ma V DC ma V DC ma S min ge Condition: Isource = Alarm operating voltage UBA max. Max. permissible sink current Isink Alarm delay time t Condition: Speed limit ng Fan description 4 /39 0,5 n > ng 8 n = ng 0 8 0 < * 0 4 /39H 0,5 n > ng 8 n = ng 0 8 0 < * 0 6 /39FL 0,5 n > ng 8 n = ng 0 8 0 < * 0 4 64 N /39GM 0,5 n > ng 8 n = ng 0 8 0 < * 0 6 68 N /39 N 0,5 n > ng 8 n = ng 0 8 0 < * 0 6 34 N/39 H 0,5 n > ng 8 n = ng 0 8 0 < * 0 34 344 N/39 HH 0,5 n > ng 8 n = ng 0 8 0 < * 0 34 44 F/39 GL 0,5 n > ng 8 n = ng 0 8 0 < * 0 38 444 F/39 0,5 n > ng 8 n = ng 0 8 0 < * 0 38 448 F/39 0,5 n > ng 8 n = ng 0 8 0 < * 0 38 Attention: With these fan specials, deviations as regards temperature range, voltage range and power consumption are possible compared with standard fans. Electrical connection U B Supply Voltage Fan Customer (+) Power UB UB +UBS n Speed *) locked n=0min - n>n G t t Isink output US U A t Alarm Signal U AHigh (-) Power U ALow t All voltages measured to ground External load resistance Ra from UA to UBA required. t = Alarm signal suppression during start-up * n < Speed limit ng by braking or blocking 9

Vario-Pro Technology Software instead of hardware aptly describes the unique fan concept, equipped at the plant with tailor-made intelligence for cooling electronics. Flexible configuration using software, allows quicker availability, sampling from the factory and the ability to supply customer-specific solutions in any quantity. DC Axial Fans Vario-Pro-Features DC Radial Fans Externally Speed setting Speed Setting via temperature, PWM or analog control voltage. On ge 94 (Speed setting). Description of speed curve with up to 4 selectable interpolation points. Linear interpolation between the points. 0 rpm. possible. Recognition of sensor failure: In case of loss of sensor, the fan operates at programmable (fail-safe) speed. Fan series 60 5 ge Alarm- and tacho functions Optional alarm/or tacho function Selectable alarm speed limit (with hysteresis) and alarm delay time Latching of alarm signal Delay only when starting or permanently active Output signal High or Low in case of alarm Optional alarm when temperature sensor fails. Optional alarm in case of excess temperature. Fan series 400 NH 46 ge Motor management High control accuracy due to digital motor management Higher operating efficiency due to optimum adaption of motor hardware and software. Fan series RL 90 N 69 ge ACmaxx Axial Fans 8400 N 30 DV 400 47 RLF 00 70 8300 3 500 N 48 RG 90 N 7 800 J 33 DV 500 49 RG 5 N 7 3400 N 34 3300 36 300 J 37 4400 FN 39 500 N 50 700 N 5 700 N 5 600 N 53 RG 60 N 73 REF 00 75 RER 0 76 RER 5 N 77 AC Axial Fans 4300 4 DV 600 55 RER 60 N 78 400 44 6400 57 400 N 45 DV 6400 59 AC Radial Fans 93 Accessories

Speed setting with temperature ebm-papst fans can come equipped with optional fan speed control. Temperature, analog voltage or a PWM can serve as control variables. External Temperature sensor Type T Internal Temperature sensor Type I Ext. NTC type LZ370 is required (not included in the standard scope of delivery). Fan Customer NTC integrated in fan hub. Fan Customer (+) Power (+) Power (+) Internal Ref. (+) Internal Ref. Input Input NTC NTC (-) 0V Ground (-) 0V Ground Standard speed-temperature curve for type T and type I Optionally available with user-selectable temperature-speed curve control nmax nmax nmin nmin 30 C 50 C Tmin Tmax nmin / nmax Tmin 30 C; Tmax = 50 C nmin 800 /min Tmin 5 C nmax model-dependent Tmax 85 C, model-dependent 94

Speed setting with control voltage or PWM DC Radial Fans DC Axial Fans Technology Speed setting via control voltage Type A Standard control range 0... 5 V Optional control range 0... 0 V Fan Customer Fan Customer (+) Internal Ref. (+) Power (+) Power Input Input Speed setting via PWM Type P (-) 0V Ground Speed setting via PWM signal that is user generated as a controlled variable. PWM signal: KHz (0 00 %) Open collector input (-) 0V Ground Fan Customer (+) Power (+) Internal Ref. Input (-) 0V Ground ACmaxx Axial Fans AC Axial Fans Standard curve P / A nmax Optional selectable curve P / A nmax AC Radial Fans nmin nmin 0 0 0 0 % 00 % PWM 5 V (Optional) 0 V A 0 0 0 00 % PWM 5 V (Optional) 0 V A 95 Accessories

Protected Fans against environmental influences Meeting special requirements for a broad range of applications. Resistant to environmental influences, such as dust, splash water, humidity, spray water and salt fog. Highly competent solutions for adapting fans to environmental conditions. Humidity protection A coating on the motor and printed circuit board protects against humidity and condensation. IP 54 protection The motor and circuit board are coated to protect them against splash water and humidity. High protection classes up to IP 67 are available on request. Salt fog protection Salt fog is extremely demanding on the resistance of the product. ebm-papst make use of technologies that protect fans and blowers from salt fog reliably and durably. Stainless steel bearings Special bearings made of stainless steel provide additional protection. The solutions that are available and in use can differ depending on size. We would be glad to develop solutions tailored for the demands of your application. 96

ACmaxx ACmaxx Axial Fans 00 AC Radial Fans AC Axial Fans ACmaxx Axial Fans Technology DC Axial Fans DC Radial Fans 97 Accessories

ACmaxx Technical Information Progress made by ebm-papst The best example: The ACmaxx fans from ebm-papst, which, thanks to an ingenious yet simple improvement over conventional AC fans, provide substantial benefits. The aim in developing the new ACmaxx series was to raise the technology standard of the conventional AC fan and, in the process, facilitate the transition to the new technology by retaining the overall mounting dimensions. In short, to ensure the fans can be replaced : without any peripheral changes or changes to the voltage situation.. More power, more flexibility In contrast to conventional AC technology, the modern drive concept of this fan series is not linked to a fixed power frequency. Hence the motor speed can be increased over a wide range. As such, ACmaxx provides significantly higher air flow and increased pressure. The outstanding features of ACmaxx fans:. Designed for all AC voltages The ACmaxx generation of fans is designed for direct connection to all AC voltages and frequencies with no switching required, handling from 85 to 65 V AC and frequencies of 50 to 60 Hertz. Voltage fluctuations in the power system are automatically compensated for. Its universal power supply allows for great potential savings in reduced stockholding and logistics. 50 5 00 75 50 5 ACmaxx 0 mm 0, 0, 0,3 0,4 0,5 (in H O) Standard AC fans 0 mm 0 30 60 90 0 50 CFM 50 00 50 00 50 m³/h 98

ACmaxx Technology DC Axial Fans 3. Highest energy efficiency The ACmaxx drive concept is based on state-of-the-art EC technology with outstanding motor efficiency. Compared to AC fans of the same size, ACmaxx energy consumption is up to 75% lower for higher cooling capacity! The energy difference alone means that the ACmaxx pays for itself after a few months. The savings over the entire service life, especially in systems with multiple fans, is considerable. [ EUR 60 40 0 0 [ 4. Long service life The ACmaxx motor efficiency is up to 75% greater than that of conventional AC fan variants. This not only saves energy, it also means less intrinsic heating in the motor. The reduced heating has a direct, positive affect on the bearing system, which is why ACmaxx fans have a service life that is up to 85% longer than conventional AC fans! This also lengthens the service and maintenance intervals significantly. The expense of replacement fans, and even more expensive downtimes, are kept to a minimum. hrs @ 40 C 80000 70000 60000 50000 40000 0 3 Years 88% increase in life time 37500 AC fans ACmaxx fans 70500 Energy cost comparison: Standard AC fan versus ACmaxx, at the same air performance. 5. Flexible and failsafe The flexibility of ACmaxx is one-of-a-kind. With its intelligent features, ACmaxx can be individually adapted to the specific application: standby mode, overload mode at peak times or night reduction all the way to temperaturecontrolled quiet operation are all possible. From speed setting to alarm or speed signal outputs, ACmaxx offers optional interfaces with which you can quickly and easily implement operation monitoring. You can find further information about these fan options in the "Specialized fans" chapter, starting on page 8. Or you can simply contact our application engineers to discuss your ideal ACmaxx fan. 6. Security Safety UL and CSA. VDE 0805 / EN60950 approvals opplied for. VDE 0700 / EN60335 on request. Our fans have the CE mark of conformity EMV protection > EN6000-4-4 Level ( kv)b > EN6000-4- Level 8 kv/5 kv > EN6000-4-3 > EN6000-4-6 > EN6000-4-8 > EN550 Class B 7. Environment Optional: improved humidity protection or Protection Class IP 54 AC Radial Fans AC Axial Fans ACmaxx Axial Fans DC Radial Fans 30000 0000 0000 Service Life AC Standard ACmaxx Fan type 99 Accessories

Frequenzy Voltage Range NEW TYPE ACmaxx Axial Fans Series AC 4300 9 x 9 x 3 mm Fans with electronically commutated external rotor motor for connection to AC voltage. With electronic protection against locked rotor and overloading. Fan of fibreglass reinforced plastic. PBTP housing, PA impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via leads AWG. Stripped and tinned ends. Open-loop speed control, sensor and alarm signals, and protection against environmental influences are available upon request. Masse 35 g. Nominal data Service Life L0 curve Type m 3 /h CFM V Hz V AC db(a) Bel / Watt min - C Hours Hours AC 4300 H 04 0 5 / 30 50 / 60 85... 65 5 6.4 / 3 400-0...+70 45 000 / 500 Extended speed monitoring on request. 80 60 40 0 0, 0, 0,3 (in H O) O 54 5,7 O Rotor protrusion max. 0,4 mm 0 5 30 45 60 75 90 5 50 75 00 5 50 CFM m³/h 64 + 0,6 00

ACmaxx Axial Fans Series AC 600 N 7 ø x 5 mm Technology Fans with electronically commutated external rotor motor. With electronic protection against locked rotor and overloading; electronic motor current limitation in the startup phase and when rotor is blocked. Metal fan housing, impeller of fibreglass reinforced plastic PA. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads AWG. Housing with ground lug M4 x 8 (TORX). 48 V DC with screws. Open-loop speed control, sensor and alarm signals, and protection against environmental influences are available upon request. Mass 900 g. DC Axial Fans Nominal data Frequenzy Voltage Range Service Life L0 curve DC Radial Fans Type m 3 /h CFM V Hz V AC db(a) Bel / Watt min - C Hours Hours AC 600 NM 350 06 5 / 30 50 / 60 85... 65 50 5.7 / 4 850-0...+70 80 000 / 40 000 Extended speed monitoring on request. AC Axial Fans ACmaxx Axial Fans 83,3 +0,6 00 75 50 0,4 0,3 0, 74 63,7 66 0,8 7,5 7,5 0,8 0 AC Radial Fans 5 0, 0 50 00 50 00 00 300 CFM m³/h 5 30,5 +0, 0 Accessories

0

AC Fans AC Fans Overview 05 AC Axial Fans 06 AC Radial Fans 6 AC Radial Fans AC Axial Fans AC Fans ACmaxx Axial Fans Technology DC Axial Fans DC Radial Fans 03 Accessories

AC Fans Technical Informations Program The renowned ebm-papst AC fans are used when DC voltage is not available. The AC range of fans is based on experience gained from decades of development activity, millions of units in series production and competence in innovation of a world-wide technological leader. A wide range of fans for AC operation are presented in this catalogue. In addition to complete equipment fans, you will also find fans without external housing, providing a particularly economical advantage when the air duct can be integrated in the respective appliance. Variety of sizes AC fans are available in a variety of sizes with either air exhaust or air intake over struts. Silent running models with sleeve bearings. For extreme ambient conditions: Fans with ball bearings. With pin connection or free-hanging leads. Shaded-pole or capacitor motors Fan drive by shaded-pole or capacitor motors most of which incorporate the world-famous ebm-papst external rotor principle: The fan blades are directly attached to the external rotor of the external rotor motor thus combining both high performance and profitability. Flat built AC fans ebm-papst also has particularly flat built AC fans with internal rotor motor. Their advantage being, quick start to full speed. A plastic impeller and the both smaller and lighter internal rotor motor lead to a lower moment of inertia. Bearings AC fans with sleeve bearings are powered by Class E insulated motors. Fans with ball bearings are equipped with Class B, E or F insulated motors. Protection class All ebm-papst fans conform to the requirements of IP 0. Fans conforming to IP 54 and special types of protection class are also available. AC voltage The line of AC fans for Euro voltage according to IEC 38 (30 V + 6 %, -0 %) is basically also available for 5 V. Frequencies AC fans can be operated at frequencies of 50 Hz or 60 Hz. However, their technical data then change accordingly. Capacitor Fans driven by capacitor external motors provide particularly high operating efficiency. Generally, the required phase-shift capacitor is already integrated in the fan housing. Overloading Almost all AC fans are protected against overloading (e.g. due to blocked rotor) the drive motors are either impedance protected (marked Impedance protected, and/or Z.P. ) or are equipped with a thermal switch (marked Thermally protected or Th.P. ). The model designation of these fans ends with S. 04

Fans for AC Operation Overview Technology ACmaxx Dimensions Approvals Air in over struts Air out over struts mm m 3 /h Type Type Type / 30 V / 50 Hz Version for 5 V / 50 Hz Fans without external housing ge DC Axial Fans Series 8000 A Series 8000 N Series 3900 Series 3000 Series 9900 Series 4000 N Series 4000 Z Series 5900 Series 5600 Series 7000 Series 7800 Series 7400 Series 6000 Series WE 00 Series W4S 00 Series WE 08 Series WE 50 Series RL 90 Series RG 90 Series RG 5 Series RG 60 Series 5 Series 60 80 x 80 x 38 9 VDE, UL, CSA 8880 A 06 36 VDE, UL, CSA 8850 A 06 48 VDE, UL, CSA 8550 A 06 48 VDE, UL, CSA 8556 A 06 80 x 80 x 38 30 VDE, UL, CSA 8880 N 07 37 VDE, UL, CSA 8850 N 07 50 VDE, UL, CSA 8550 N 07 50 VDE, UL, CSA 8556 N 07 9 x 9 x 5 3 VDE, UL, CSA 3950 L 0 45 VDE, UL, CSA 3950 M 0 59 VDE, UL, CSA 3950 0 3 VDE, UL, CSA 3956 L 0 45 VDE, UL, CSA 3956 M 0 59 VDE, UL, CSA 3956 0 9 x 9 x 38 49 VDE, UL, CSA 3850 54 VDE, UL, CSA 3856 67 VDE, UL, CSA 3550 67 VDE, UL, CSA 3556 75 VDE, UL, CSA 3650 75 VDE, UL, CSA 3656 9 x 9 x 5 84 VDE, UL, CSA 9956 L 04 VDE, UL, CSA 9956 M 7 VDE, UL, CSA 9950 7 VDE, UL, CSA 9956 9 x 9 x 38 80 VDE, UL, CSA 4890 N 3 00 VDE, UL, CSA 4850 N 3 3 VDE, UL, CSA 4580 N 3 45 VDE, UL, CSA 4550 N 3 60 VDE, UL, CSA 4650 N 3/4 60 VDE, UL, CSA 4656 N 3/4 9 x 9 x 38 00 VDE, UL, CSA 4850 Z 4 5 VDE, UL, CSA 4580 Z 4 60 VDE, UL, CSA 4650 Z 4/6 60 VDE, UL, CSA 4656 Z 4/6 7 x 7 x 38 50 VDE, UL, CSA 5988 7 80 VDE, UL, CSA 5950 7 80 VDE, UL, CSA 5958 7 35 x 35 x 38 35 VDE, UL, CSA 5656 S 8 50 x 7 x 38 330 VDE, UL, CSA 7056 ES 9 50 Ø x 55 35 VDE, UL, CSA 7855 ES 0 35 VDE, UL, CSA 7856 ES 0 50 Ø x 55 390 VDE, UL, CSA 7450 ES 7 Ø x 5 375 VDE, UL, CSA 6058 ES 40 VDE, UL, CSA 6078 ES Ø 00 95 VDE, UL, CSA WE 00-HH38-0 3 Ø 00 455 VDE, UL, CSA W4S 00-HH04-0 3 Ø 08 85 WE 08-BA0-0 4 Ø 50 95 VDE, UL, CSA WE 50-HL06-0 5 AC radial DC axial mm m 3 /h Type Type Type / x x 37 40 VDE, UL, CSA RL 90-8/50 / 6 35 x 35 x 38 54 VDE, UL, CSA RG 90-8/50 / 7 80 x 80 x 40 86 VDE, UL, CSA RG 5-9/56 8 0 x 0 x 56 0 VDE, UL, CSA RG 60-8/56 S 9 38 Ø x 40 04 VDE, UL, CSA RER 5-9/56 30 76 Ø x 54 34 VDE, UL, CSA RER 60-8/56 S 3 05 DC Radial Fans ACmaxx Axial Fans AC Fans Overview AC Radial Fans Accessories

AC Axial Fans Series 8000 A 80 x 80 x 38 mm AC fans with external rotor shaded-pole motor. Impedance protected against overloading. Metal fan housing and impeller. Air intake over struts. Rotational direction CW looking at rotor. Electrical connection via flat pins.8 x 0.5 mm. Fan housing with ground lug and screw M4 x 8 (TORX). Mass 490 g. Also available with electrical connection via leads. Also available with air-exhaust over struts and of rotation cw. Frequenzy Service Life L0 40 30 0 0 3 6 5 4 Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 8880 A 9 7. 30 50 6 4. / 9.0 750-0...+80 60 000 / 5 000 8850 A 36. 30 50 3 4.6 /.5 50-0...+70 5 500 / 5 000 8550 A 48 8.3 30 50 36 5.0 /.0 700-0...+70 5 500 / 5 000 3 8556 A 48 8.3 30 50 37 5. /.0 800-40...+90 5 500 / 5 000 3 8830 A 34 0.0 5 60 9 4.3 / 8.0 950-0...+80 6 500 / 5 000 4 8800 A 45 6.5 5 60 34 4.8 /.0 500-0...+70 55 000 / 7 500 5 8500 A 57 33.5 5 60 4 5.5 /.0 3 00-0...+75 55 000 / 5 000 6 8506 A 57 33.5 5 60 4 5.7 /.0 3 300-40...+95 55 000 / 5 000 6 Series 8000 A with mounting bosses 0,05 0,0 0,5 (in H O) 0 5 0 5 0 5 30 CFM 0 0 30 40 50 m³/h 50 Hz 60 Hz 06

AC Axial Fans Series 8000 N 80 x 80 x 38 mm Technology AC fans with external rotor shaded-pole motor. Impedance protected against overloading. Metal fan housing and impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via leads. Stripped and tinned ends. Fan housing with ground lug for screw M4 x 8 (TORX). Mass 490 g. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 60 50 40 30 0 0 6 3 5 4 8880 N 30 7.7 30 50 8 3.3 / 9.0 750-0...+80 60 000 / 5 000 8850 N 37.8 30 50 4 3.9 /.5 50-0...+70 5 500 / 5 000 8550 N 50 9.4 30 50 30 4.4 /.0 700-0...+70 5 500 / 5 000 3 8556 N 50 9.4 30 50 3 4.5 /.0 800-40...+90 5 500 / 5 000 3 8830 N 36. 5 60 3.7 / 8.0 950-0...+80 6 500 / 5 000 4 8800 N 47 7.7 5 60 8 4.3 /.0 500-0...+70 55 000 / 7 500 5 8500 N 6 35.9 5 60 34 4.8 /.0 3 00-0...+75 55 000 / 5 000 6 8506 N 6 35.9 5 60 35 5.0 /.0 3 300-40...+95 55 000 / 5 000 6 Fan Type Lead Wires 8830 N 8800 N 8550 N 8500 N 30 mm long AWG 8, TR 64 8880 N 30 mm long AWG 8, TR 64 8556 N 8506 N 30 mm long AWG 8850 N 440 mm long AWG 8, TR 64 AC Axial Fans ACmaxx Axial Fans 0,05 0,0 0,5 0,0 (in H O) AC Radial Fans 0 5 0 5 0 5 30 CFM 0 0 30 40 50 m³/h 50 Hz 60 Hz 07 Accessories

AC Axial Fans Series 8000 TA 76 Ø x 37 mm AC fans with external rotor shaded-pole motor. Impedance protected against overloading. Impeller and mounting bracket of metal. Air intake over mounting bracket. Rotational direction CW looking at rotor. Electrical connection via leads. Stripped and tinned ends. Mass 370 g. Frequenzy Service Life L0 3 37 + +0,5 35 ø75,8 0 3,7 0 R4 +0 0,3 +0, Type m 3 /h CFM V Hz db(a) / Watt min - C Hours Hours 8880 TA 3 3.5 30 50 5 / 9.0 650-0...+80 60 000 / 5 000 8850 TA 30 7.7 30 50 9 /.0 00-0...+70 5 500 / 5 000 8550 TA 38.4 30 50 5 /.0 650-0...+70 5 500 / 5 000 8556 TA 38.4 30 50 6 /.0 750-40...+90 5 500 / 5 000 8830 TA 6 5.3 5 60 8 / 8.0 850-0...+80 6 500 / 5 000 8800 TA 34 0.0 5 60 3 /.0 450-0...+70 55 000 / 7 500 8500 TA 45 6.5 5 60 30 /.0 3 50-0...+75 55 000 / 5 000 8506 TA 45 6.5 5 60 3 /.0 3 50-40...+95 55 000 / 5 000 + 6 The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise has been measured with an orifice 76.5 mm Ø at a distance of approx. 7 mm from the mounting bracket. Under exceptionally favourable mounting conditions, the air flow of fan series 8000 A is achievable. The noise in the optimal operating range can only be measured for these fans in a specific application. Fan Type Lead Wires 8880 TA 8850 TA 8830 TA 8800 TA 35 mm long AWG 8, TR 64 8550 TA 8500 TA 35 mm long AWG 8, TR 64 8556 TA 8506 TA 35 mm long AWG 8 90 08

AC Axial Fans Series 8000 TV 76 Ø x 37 mm Technology AC fans with external rotor shaded-pole motor. Impedance protected against overloading. Impeller and mounting bracket of metal. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via leads. Stripped and tinned ends. Mass 370 g. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type m 3 /h CFM V Hz db(a) / Watt min - C Hours Hours 8880 TV 4 4. 30 50 5 / 9.0 650-0...+80 60 000 / 5 000 8850 TV 3 8. 30 50 0 /.0 00-0...+70 5 500 / 5 000 8550 TV 40 3.5 30 50 7 /.0 650-0...+70 5 500 / 5 000 8556 TV 40 3.5 30 50 8 /.0 750-40...+90 5 500 / 5 000 8830 TV 7 5.9 5 60 8 / 8.0 850-0...+80 6 500 / 5 000 8800 TV 36. 5 60 4 /.0 450-0...+70 55 000 / 7 500 8500 TV 47 7.7 5 60 3 /.0 3 50-0...+75 55 000 / 5 000 8506 TV 47 7.7 5 60 33 /.0 3 50-40...+95 55 000 / 5 000 The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise has been measured with an orifice 76.5 mm Ø at a distance of approx. 7 mm from the mounting bracket. Under exceptionally favourable mounting conditions, the air flow of fan series 8000 N is achievable. The noise in the optimal operating range can only be measured for these fans in a specific application. Fan Type Lead Wires 8880 TV 8850 TV 8830 TV 8800 TV 35 mm long AWG 8, TR 64 8550 TV 8500 TV 35 mm long AWG 8, TR 64 8556 TV 8506 TV 35 mm long AWG 8 3 37 + 35 +0 ø75,8 0,3 0 ACmaxx Axial Fans +0,5 3,7 0 R4 +0, + 6 AC Radial Fans AC Axial Fans 90 09 Accessories

AC Axial Fans Series 3900 9 x 9 x 5 mm AC fans with internal rotor shaded-pole motor. Impedance protected against overloading. Metal fan housing, impeller of mineral-reinforced plastic PA. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via flat pins.8 x 0.5 mm. Fan housing with ground lug for screw M4. Mass 80 g. Frequenzy Service Life L0 Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 3950 L 3 8. 30 50 4 3.8 / 6.0 550-0...+80 70 000 / 7 500 3956 L 3 8. 30 50 4 3.8 / 6.0 550-40...+80 70 000 / 7 500 3950 M 45 6.5 30 50 9 4. / 6.0 50-0...+80 70 000 / 7 500 3956 M 45 6.5 30 50 9 4. / 6.0 50-40...+80 70 000 / 7 500 3950 59 34.7 30 50 35 4.7 /.0 650-0...+80 55 000 / 0 000 3 3956 59 34.7 30 50 35 4.7 /.0 650-40...+80 55 000 / 0 000 3 3900 L 39 3.0 5 60 7 4.0 / 5.0 850-0...+80 70 000 / 7 500 4 3906 L 39 3.0 5 60 7 4.0 / 5.0 850-40...+80 70 000 / 7 500 4 3900 M 53 3. 5 60 34 4.6 / 5.0 600-0...+80 70 000 / 7 500 5 3906 M 53 3. 5 60 34 4.6 / 5.0 600-40...+80 70 000 / 7 500 5 3900 70 4. 5 60 40 5. / 9.0 3 50-0...+80 60 000 / 500 6 3906 70 4. 5 60 40 5. / 9.0 3 50-40...+80 60 000 / 500 6 60 50 40 30 0 0 0,05 0,0 0,5 0,0 (in H O) 3 6 5 4 0 0 0 30 CFM 0 0 30 40 50 60 m³/h 50 Hz 60 Hz 0

AC Axial Fans Series 3000 9 x 9 x 38 mm Technology AC fans with external rotor shaded-pole motor. Impedance protected against overloading. Metal fan housing and impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via leads. Stripped and tinned ends. Fan housing with ground lug and screw M4 x 8 (TORX). Mass 40 g. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 3850 49 8.8 30 50 4 3.7 / 9.0 750-0...+75 60 000 / 7 500 3856 54 3.8 30 50 6 3.9 / 9.0 950-40...+90 60 000 / 0 000 3550 67 39.4 30 50 3 4.4 / 9.0 300-0...+80 60 000 / 5 000 3 3556 67 39.4 30 50 33 4.5 / 9.0 400-40...+90 60 000 / 0 000 3 3650 75 44. 30 50 36 4.8 /.0 650-0...+55 5 500 / 37 500 4 3656 75 44. 30 50 37 4.9 /.0 700-40...+75 5 500 / 500 4 3800 54 3.8 5 60 6 3.9 / 8.0 900-0...+80 6 500 / 5 000 5 3806 60 35.3 5 60 9 4. / 8.0 50-40...+95 6 500 / 7 500 6 3500 73 43.0 5 60 35 4.6 / 8.0 500-0...+80 6 500 / 5 000 7 3506 73 43.0 5 60 36 4.7 / 8.0 600-40...+95 6 500 / 7 500 7 3600 89 5.4 5 60 4 5. /.0 3 00-0...+65 55 000 / 30 000 8 3606 89 5.4 5 60 4 5. /.0 3 00-40...+75 55 000 / 5 000 8 70 60 50 40 30 0 0 4 3 8 7 6 5 ACmaxx Axial Fans Fan Type Lead Wires With Sleeve bearings 30 mm long AWG 8, TR 64 With Ball bearings 30 mm long AWG 8 AC Axial Fans 0,05 0,0 0,5 0, 0,5 (in H O) AC Radial Fans CFM 0 0 0 30 40 0 0 30 40 50 60 70 m³/h 50 Hz 60 Hz Accessories

AC Axial Fans Series 9900 9 x 9 x 5 mm AC fans with external rotor shaded-pole motor. Protected against overloading by thermal cutout. Metal fan housing and impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via flat pins.8 x 0.5 mm. Fan housing with ground lug and screw M4 x 8 (TORX). Mass 800 g. Frequenzy Service Life L0 40 30 0 0 3 6 5 4 Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 9956 L 84 49.4 30 50 9 4.4 / 9.5 850-40...+80 57 500 / 500 9956 M 04 6. 30 50 35 4.7 / 0.0 50-40...+80 57 500 / 500 9950 7 68.9 30 50 37 5.0 / 4.0 450-0...+70 47 500 / 500 3 9956 7 68.9 30 50 37 5.0 / 4.0 450-40...+70 47 500 / 500 3 9906 L 00 58.9 5 60 34 4.6 / 8.0 00-40...+80 6 500 / 5 000 4 9906 M 65.3 5 60 37 5.0 / 8.0 450-40...+80 6 500 / 5 000 5 9900 35 79.5 5 60 4 5.4 /.0 850-0...+70 5 500 / 5 000 6 9906 35 79.5 5 60 4 5.4 /.0 850-40...+70 5 500 / 5 000 6 0,05 0,0 0,5 (in H O) 0 5 30 45 60 CFM 0 40 60 80 00 m³/h 50 Hz 60 Hz

AC Axial Fans Series 4000 N 9 x 9 x 38 mm Technology AC fans with external rotor shaded-pole motor. Impedance protected against overloading. Metal fan housing and impeller Air intake over struts. Rotational direction CW looking at rotor. Types 4890 N and 4840 N air exhaust over struts. Electrical connection via flat pins 3.0 x 0.5 mm. Also availabel: Models with mounting bosses and single leads. Fan housing with ground lug for screw M 4 and UNC. Mass 550 g. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 4890 N 80 47. 30 50 5 4.0 /.0 550-0...+70 55 000 / 7 500 4850 N 00 58.9 30 50 3 4.4 / 0.0 800-0...+70 57 500 / 7 500 4580 N 3 7.4 30 50 4 5. / 8.0 350-0...+55 40 000 / 7 500 3 4550 N 45 85.3 30 50 44 5.4 / 6.5 550-0...+55 4 500 / 30 000 4 4650 N 60 94. 30 50 46 5.4 / 9.0 650-0...+55 37 500 / 7 500 5 4656 N 60 94. 30 50 47 5.5 / 9.0 650-40...+85 37 500 / 5 000 5 4840 N 85 50.0 5 60 6 4. / 0.0 650-0...+75 57 500 / 5 000 6 4800 N 97 57. 5 60 3 4.3 / 9.0 750-0...+75 60 000 / 7 500 7 4530 N 5 88.9 5 60 45 5.4 / 6.0 700-0...+65 4 500 / 5 000 8 4500 N 69 99.5 5 60 48 5.7 / 5.0 3 000-0...+65 47 500 / 5 000 9 4600 N 80 05.9 5 60 50 5.7 / 8.0 3 00-0...+60 40 000 / 5 000 0 4606 N 80 05.9 5 60 5 5.8 / 8.0 3 00-40...+90 40 000 / 5 000 0 ACmaxx Axial Fans 80 60 40 0 0, 0, 0,3 (in H O) 5 4 3 80 60 40 0 0, 0, 0,3 (in H O) 0 9 8 7 6 0 0 40 60 80 5 50 75 00 5 CFM m³/h AC Axial Fans AC Radial Fans 60 Hz 0 0 40 60 80 5 50 75 00 5 CFM m³/h 50 Hz 3 Accessories

AC Axial Fans Series 4000 Z 9 x 9 x 38 mm AC fans with external rotor shaded-pole motor. Impedance protected against overloading. Metal fan housing and impeller. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via flat pins.8 x 0.5 mm. Also availabel: Models with mounting bosses and single leads. Fan housing with ground lug and screw M4 x 8 (TORX). Mass 540 g. Frequenzy Service Life L0 70 60 50 40 30 0 0 3 6 5 4 Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 4850 Z 00 58.9 30 50 6 4.0 / 3.0 700-0...+65 50 000 / 7 500 4856 Z 00 58.9 30 50 6 4.0 / 3.0 700-40...+75 50 000 / 0 000 4580 Z 5 67.7 30 50 30 4.3 / 3.0 900-0...+65 50 000 / 7 500 4586 Z 5 67.7 30 50 30 4.3 / 3.0 900-40...+75 50 000 / 0 000 4650 Z 60 94. 30 50 40 5.3 / 9.0 650-0...+50 37 500 / 30 000 3 4656 Z 60 94. 30 50 40 5.3 / 9.0 650-40...+75 37 500 / 7 500 3 4800 Z 05 6.6 5 60 8 4. /.0 800-0...+70 5 500 / 5 000 4 4806 Z 05 6.6 5 60 8 4. /.0 800-40...+75 5 500 / 7 500 4 4530 Z 0 70.6 5 60 3 4.4 /.0 000-0...+70 5 500 / 5 000 5 4536 Z 0 70.6 5 60 3 4.4 /.0 000-40...+75 5 500 / 7 500 5 4600 Z 80 05.9 5 60 45 5.6 / 8.0 3 00-0...+60 40 000 / 5 000 6 4606 Z 80 05.9 5 60 45 5.6 / 8.0 3 00-40...+85 40 000 / 5 000 6 0,05 0,0 0,5 0,0 0,5 (in H O) 0 0 40 60 80 00 CFM 5 50 75 00 5 50 m³/h 50 Hz 60 Hz 4

AC Axial Fans Series 4600 TA 3 Ø x 37 mm Technology AC fans with external rotor shaded-pole motor. Impedance protected against overloading. Impeller and mounting bracket of metal. Air intake over mounting bracket. Rotational direction CW looking at rotor. Electrical connection via leads. Stripped and tinned ends. Mass 430 g. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type m 3 /h CFM V Hz db(a) / Watt min - C Hours Hours 4650 TA 38 8. 30 50 4 / 9.0 550-0...+45 37 500 / 3 500 4656 TA 38 8. 30 50 4 / 9.0 550-40...+75 37 500 / 7 500 4600 TA 47 86.5 5 60 43 / 8.0 900-0...+50 40 000 / 3 500 4606 TA 47 86.5 5 60 44 / 8.0 900-40...+80 40 000 / 7 500 The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise has been measured with an orifice 09 mm Ø at a distance of approx. 7 mm from the mounting bracket. Under exceptionally favourable mounting conditions, the air flow of fan series 4600 N is achievable. The noise in the optimal operating range can only be measured for these fans in a specific application. Fan Type Lead Wires 4650 TA 4600 TA AWG, TR 3 4656 TA 4606 TA AWG 8 6 37 R4 0,5 +0,3 + 3 6 + 375 +0 48, +0, ø,5 +0,3 ACmaxx Axial Fans 4,3 0,5 + AC Axial Fans AC Radial Fans 90 5 Accessories

AC Axial Fans Series 4600 TZ 08 Ø x 37 mm AC fans with external rotor shaded-pole motor. Impedance protected against overloading. Impeller and mounting bracket of metal. Air exhaust over struts. Rotational direction CW looking at rotor. Electrical connection via leads. Stripped and tinned ends. Mass 430 g. Frequenzy Service Life L0 6 R4 0,5 +0,3 37 + 3 6 + 375 +0 48, + 0, ø08 0,3 + Type m 3 /h CFM V Hz db(a) / Watt min - C Hours Hours 4650 TZ 5 73.6 30 50 4 / 9.0 600-0...+50 37 500 / 37 500 4656 TZ 5 73.6 30 50 4 / 9.0 600-40...+65 37 500 / 0 000 4600 TZ 40 8.4 5 60 45 / 8.0 950-0...+50 40 000 / 3 500 4606 TZ 40 8.4 5 60 45 / 8.0 950-40...+75 40 000 / 7 500 The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise has been measured with an orifice 09 mm Ø at a distance of approx. 7 mm from the mounting bracket. Under exceptionally favourable mounting conditions, the air flow of fan series 4000 Z is achievable. The noise in the optimal operating range can only be measured for these fans in a specific application. Fan Type Lead Wires 4650 TZ 4600 TZ AWG, TR 3 4656 TZ 4606 TZ AWG 8 4,3 0,5 + 90 6

AC Axial Fans Series 5900 7 x 7 x 38 mm Technology AC fans with internal rotor shaded-pole motor. Impedance protected against overloading. Metal fan housing and impeller of fibreglass reinforced plastic PA. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via flat pins.8 x 0.8 mm. Fan housing with ground lug and screw M4 x 6. Mass 570 g. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 5988 50 88.3 30 50 37 4.9 / 3.0 50-30...+55 35 000 / 0 000 5950 80 05.9 30 50 43 5.4 / 8.0 700-0...+50 40 000 / 3 500 3 5958 80 05.9 30 50 44 5.5 / 8.0 750-30...+60 40 000 / 5 000 3 5938 6 95.3 5 60 40 4.9 /.0 500-30...+55 35 000 / 0 000 5900 06. 5 60 46 5.7 / 7.0 3 050-0...+55 4 500 / 30 000 4 5908 06. 5 60 47 5.8 / 7.0 3 00-30...+75 4 500 / 0 000 4 70 60 50 40 30 0 0 0,05 0,0 0,5 0,0 0,5 (in H O) 3 4 AC Axial Fans ACmaxx Axial Fans AC Radial Fans 0 0 40 60 80 00 CFM 5 50 75 00 5 50 m³/h 50 Hz 60 Hz 7 Accessories

AC Axial Fans Series 5600 35 x 35 x 38 mm AC fans with external rotor shaded-pole motor. Protected against overloading by thermal cutout. Metal fan housing and impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via flat pins.8 x 0.5 mm. Fan housing with ground lug and screw M4 x 8 (TORX). Mass 800 g. Frequenzy Service Life L0 00 80 60 40 0 Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 5656 S 35 38.3 30 50 46 5.9 / 30.0 700-35...+70 45 000 / 0 000 5606 S 70 58.9 5 60 50 6. / 6.0 3 00-35...+80 47 500 / 0 000 0, 0, 0,3 (in H O) 0 40 80 0 CFM 50 00 50 00 50 m³/h 50 Hz 60 Hz 8

AC Axial Fans Series 7000 50 x 7 x 38 mm Technology AC fans with external rotor capacitor motor. Protected against overloading by integrated thermal cutout. Metal fan housing and impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via flat pins.8 x 0.5 mm. Fan housing with ground lug and screw M4 x 6. Mass 900 g. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 7056 ES 330 94. 30 50 5 6.4 / 9.0 800-30...+65 60 000 / 3 000 7006 ES 390 9.5 5 60 57 6.8 / 4.0 3 300-30...+80 55 000 / 8 000 60 0 80 40 Minimum ambient temperature -5 C, admissible for a short time at -30 C; without reaching dew point. 0, 0, 0,3 0,4 0,5 0,6 (in H O) AC Radial Fans AC Axial Fans ACmaxx Axial Fans 0 40 80 0 60 00 CFM 50 00 50 00 50 300 m³/h 50 Hz 60 Hz 9 Accessories

AC Axial Fans Series 7800 50 Ø x 55 mm AC fans with external rotor shaded-pole motor. Protected against overloading by integrated thermal cutout. Metal fan housing and impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via leads. Stripped and tinned ends. Fan housing with ground lug and screw M4 x 6. Mass 000 g. Frequenzy Service Life L0 40 0 00 80 60 40 0 Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 7855 ES 35 9.3 30 50 48 6.0 / 45.0 800-30...+50 40 000 / 000 7856 ES 35 9.3 30 50 48 6.0 / 45.0 800-30...+70 40 000 / 000 7805 ES 380 3.7 5 60 5 6.4 / 38.0 3 50-30...+75 40 000 / 9 000 7806 ES 380 3.7 5 60 5 6.4 / 38.0 3 50-30...+90 40 000 / 500 Minimum ambient temperature -5 C, admissible for a short time at -30 C; without reaching dew point. 0, 0, 0,3 0,4 0,5 (in H O) 0 40 80 0 60 00 CFM 50 00 50 00 50 300 m³/h 50 Hz 60 Hz 0

AC Axial Fans Series 7400 50 Ø x 55 mm Technology AC fans with external rotor shaded-pole motor. Protected against overloading by integrated thermal cutout. Metal fan housing and impeller. Air intake over struts. Rotational direction CCW looking at rotor. Electrical connection via leads. Stripped and tinned ends. Fan housing with ground lug and screw M4 x 6. Mass 000 g. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 7450 ES 390 9.5 30 50 58 6.8 / 47.0 700-30...+60 40 000 / 8 000 7400 ES 445 6.9 5 60 60 6.9 / 46.0 3 050-30...+80 38 000 / 5 000 0 80 60 40 0 0, 0, 0,3 0,4 (in H O) 00 Minimum ambient temperature -5 C, admissible for a short time at -30 C; without reaching dew point. AC Radial Fans AC Axial Fans ACmaxx Axial Fans 0 40 80 0 60 00 40 CFM 00 00 300 400 m³/h 50 Hz 60 Hz Accessories

AC Axial Fans Series 6000 7 Ø x 5 mm AC fans with external rotor capacitor motor. Protected against overloading by integrated thermal cutout. Metal fan housing and impeller. Air exhaust over struts. Rotational direction CCW looking at rotor. Electrical connection via flat pins.8 x 0.5 mm. Fan housing with ground lug and screw M4 x 6. Mass 000 g. Frequenzy Service Life L0 Type m 3 /h CFM V Hz db(a) Bel / Watt min - C Hours Hours 6058 ES 375 0.7 30 50 54 5.9 / 4.0 800-30...+70 48 000 / 3 000 6078 ES 40 47. 30 50 54 6.3 / 6.0 800-30...+75 37 500 / 0 000 6008 ES 440 59.0 5 60 58 6.4 / 6.0 3 300-30...+70 4 000 / 8 000 3 608 ES 500 84.3 5 60 58 6.7 / 9.0 3 300-30...+75 40 000 / 0 000 4 Minimum ambient temperature -5 C, admissible for a short time at -30 C; without reaching dew point. 60 0 80 40 0, 0, 0,3 0,4 0,5 0,6 (in H O) 3 4 0 40 80 0 60 00 40 CFM 00 00 300 400 m³/h 50 Hz 60 Hz

AC Axial Fans W** 00 Ø 5 x 5 x 80 mm Technology External-single-phase motor.* External-current motor.** Integrated thermal monitor. Fan housing of die-cast aluminium. Impeller of sheet steel, welded onto rotor. Air exhaust over struts. Rotational direction CCW looking at rotor. Connection leads WE 00: wired with capacitor on terminal strip. W4S 00: terminal strip. Mass 000 g. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type m 3 /h CFM V DC Hz db(a) Bel / Watt min - C Hours Hours WE00-HK86-0* 030 606. 5 60 6 4. / 80.0 800-5...+65 60 000 / 58 000 WE00-HK38-0* 95 544.4 30 50 59 4.6 / 64.0 550-5...+60 63 000 / 60 000 W4S00-HK04-0** 450 64.9 30 50 40 5.0 / 30.0 370-5...+70 85 000 / 80 000 [] 50 40 30 0 0 0,05 0, 0,5 0,0 (in H O) ACmaxx Axial Fans 0 50 00 00 50 00 50 00 300 400 50 Hz [CFM] [m³/h] AC Axial Fans [] 60 40 0 00 80 60 40 0 0, 0, 0,3 0,4 0,5 0,6 (in H O) AC Radial Fans 0 00 00 300 400 500 [CFM] 00 400 600 800 50 Hz m³/h 60 Hz 3 Accessories

AC Diagonal Fans W*08 Ø 3 x 80 mm External-single-phase motor.* External-current motor.** Fan housing of die-cast aluminium GDAISi. Impeller of plastic PA 6.6. Air exhaust over struts. Rotational direction CCW looking at rotor. Connection leads with terminal strip (cable exit possible via terminal strip). Only WE 08-BA: integrated operating capacitor. Mass 800 g. Insulation class F. Frequenzy Service Life L0 Type m 3 /h CFM V Hz db(a) / Watt min - C Hours Hours WE 08-BA86-0* 95 544.4 5 60 70 / 87.0 300-5...+7 57 000 / 54 000 WE 08-BA0-0* 85 479.7 30 50 68 / 67.0 750-5...+7 6 000 / 58 000 WD 08-BA0-0** 80 48.6 50 67 / 60.0 740 6 000 / 58 000 400 Y -5...+70 90 54.5 60 70 80.0 3090 57 000 / 54 000 n P LpA Type [Hz] [min - ] [W] [dba] WD 08-BA 50 ➀ ❶ 3090 80 70 ➀ ➋ 990 93 69 ➀ ➌ 960 96 69 ➀ ➍ 990 9 70 60 ➀ ➎ 740 60 67 ➀ ➏ 690 69 67 ➀ ➐ 670 70 66 ➀ ➑ 690 67 68 WE 08-BA 50 ➀ ❶ 300 87 70 ➀ ➋ 990 00 70 ➀ ➌ 960 0 69 ➀ ➍ 300 97 70 60 ➀ ➎ 750 67 68 ➀ ➏ 690 74 67 ➀ ➐ 680 75 66 ➀ ➑ 700 7 68 60 40 0 00 80 60 40 0 0, 0, 0,3 0,4 0,5 (in H O) 8 4 7 3 6 5 0 00 00 300 400 500 CFM 00 400 600 800 m³/h 50 Hz 60 Hz 4

AC Axial Fans WE 50 80 x 80 x 80 mm Technology External single-phase motor. Fan housing of die-cast aluminium. Impeller of sheet steel, welded onto rotor. Air exhaust over struts. Rotational direction CCW looking at rotor. Connection leads with terminal strip, wired with capacitor on terminal strip. Integrated thermal monitor. Mass 000 g. Class F insulated. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type m 3 /h CFM V DC Hz db(a) Bel / Watt min - C Hours Hours WE 50-HL06-0 865 077. 30 50 69 4. / 7.0 550-5...+60 63 000 / 70 000 3 ACmaxx Axial Fans [] 40 0 00 80 60 40 0,4 0,5 (in H O) 0, 0,3 3 AC Axial Fans AC Radial Fans 0 0, 0 00 400 600 800 [CFM] 400 800 00 600 50 Hz m³/h 60 Hz 5 Accessories

AC Radial Fans Series RL 90 x x 37 mm AC radial blower with external rotor shaded-pole motor. Impedance protected against overloading. Spiral housing and blower wheel of fibreglass-reinforced plastic. Housing base of galvanised steel plate. Air exhaust radial, through housing port. Rotational direction CW looking at rotor. Electrical connection via leads. Stripped and tinned ends. Mass 680 g. Frequenzy Service Life L0 Type m 3 /h CFM V Hz Bel / Watt min - C Hours Hours RL 90-8/50 40 3.5 30 50 5.6 / 0.0 450-0...+50 37 500 / 30 000 RL 90-8/56 40 3.5 30 50 5.6 / 0.0 450-30...+70 37 500 / 0 000 RL 90-8/00 4 4.7 5 60 6.0 / 9.5 550-0...+60 37 500 / 5 000 RL 90-8/06 4 4.7 5 60 6.0 / 9.5 550-30...+85 37 500 / 5 000 0 00 80 60 40 0 Fan Type Lead Wires RL 90-8/50 RL 90-8/00 AWG 8, TR 3 RL 90-8/56 RL 90-8/06 AWG 0, 0, 0,3 0,4 (in H O) 0 4 8 6 0 CFM 5 0 5 0 5 30 m³/h 50 Hz 60 Hz 6

AC Radial Fans Series RG 90 35 x 35 x 38 mm Technology AC radial blower with external rotor shaded-pole motor. Impedance protected against overloading. Spiral housing and blower wheel of fibreglass-reinforced plastic. Housing base of galvanised steel plate. Air exhaust radial, through housing port. Rotational direction CW looking at rotor. Electrical connection via leads AWG. Stripped and tinned ends. Mass 560 g. DC Axial Fans Frequenzy Service Life L0 DC Radial Fans Type Type m 3 /h m 3 /h CFM CFM V DCV Hz Hz db(a) Bel Bel / / Watt Watt min min - - C C Hours Hours Hours Hours RG 90-8/50 54 3.8 30 50 5.8 /.0 00-30...+60 35 000 / 0 000 RG 90-8/56 54 3.8 30 50 5.8 /.0 00-30...+60 35 000 / 0 000 RG 90-8/00 47 7.7 5 60 6. /.0 900-30...+65 35 000 / 0 000 RG 90-8/06 47 7.7 5 60 6. /.0 900-30...+65 35 000 / 0 000 AC Axial Fans ACmaxx Axial Fans 0 00 80 60 40 0 AC Radial Fans 0, 0, 0,3 0,4 (in H O) 0 5 0 5 0 5 30 CFM 0 0 30 40 50 m³/h 50 Hz 60 Hz 7 Accessories

AC Radial Fans Series RG 5 80 x 80 x 40 mm AC radial blower with external rotor shaded-pole motor. Impedance protected against overloading. Spiral housing and blower wheel of fibreglass-reinforced plastic. Housing base of galvanised steel plate. Air exhaust radial, through housing port. Rotational direction CW looking at rotor. Electrical connection via leads AWG. Stripped and tinned ends. Mass 850 g. Frequenzy Service Life L0 Type m 3 /h CFM V Hz Bel / Watt min - C Hours Hours RG 5-9/56 86 50.6 30 50 5.8 / 0.0 550-30...+70 37 500 / 0 000 RG 5-9/06 94 55.3 5 60 6.0 / 9.0 750-30...+80 40 000 / 5 000 00 50 00 50 0, 0,4 0,6 (in H O) 0 0 0 30 40 50 CFM 0 40 60 80 m³/h 50 Hz 60 Hz 8

AC Radial Fans Series RG 60 0 x 0 x 56 mm Technology AC radial blower with external rotor shaded-pole motor. Thermal contactor as protection against thermal overloading. Spiral housing and blower wheel of fibreglass-reinforced plastic. Housing base of galvanised steel plate. Air exhaust radial, through housing port. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 8. Stripped and tinned ends. Mass.7 kg. DC Axial Fans Frequenzy Service Life L0 DC Fans Radial Type Type m 3 /h m 3 /h CFM CFM V DCV Hz Hz db(a) Bel Bel / / Watt Watt min min - - C C Hours Hours Hours Hours RG 60-8/56S 0 8.9 30 50 6.6 / 47.0 750-30...+70 30 000 / 5 000 RG 60-8/06S 3 3.3 5 60 6.9 / 50.0 3 050-30...+80 7 500 / 500 AC Axial Fans ACmaxx Axial Fans 400 300 00 00 0,4 0,8, (in H O) AC Radial Fans 0 0 40 60 80 00 0 CFM 50 00 50 00 m³/h 50 Hz 60 Hz 9 Accessories

AC Radial Fans Seriess RER 5 38 Ø x 40 mm AC radial blower with external rotor shaded-pole motor. Impedance protected against overloading. Blower wheel of fibreglass-reinforced plastic, with steel plate reinforced. Air exhaust radial. Rotational direction CW looking at rotor. Electrical connection via leads AWG. Stripped and tinned ends. Mass 500 g. Frequenzy Service Life L0 Type m 3 /h CFM V Hz Bel / Watt min - C Hours Hours RER 5-9/56 04 6. 30 50 6. / 9.0 600-30...+60 37 500 / 500 RER 5-9/06 5 67.7 5 60 6.5 / 8.0 850-30...+70 40 000 / 0 000 00 80 60 40 0 0, 0, 0,3 (in H O) The air flow and noise level of fans without external housing depend on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 0 x 0 mm. Cover plate 0 x 0 mm with an air-inlet of Ø 86 mm, concentric to the blower wheel. 0 0 0 30 40 50 60 CFM 0 40 60 80 00 m³/h 50 Hz 60 Hz 30

AC Radial Fans Series RER 60 76 Ø x 54 mm Technology AC radial blower with external rotor shaded-pole motor. Impedance protected against overloading. Blower wheel of fibreglass-reinforced plastic, with steel plate reinforced. Air exhaust radial. Rotational direction CCW looking at rotor. Electrical connection via leads AWG 8. Stripped and tinned ends. Mass 000 g. DC Axial Fans Frequenzyy Service Life L0 DC Radial Fans TypType m 3 /h m 3 /h CFM CFM V DCV Hz Hz db(a) Bel Bel / / Watt Watt min min - - C C Hours Hours Hours Hours RER 60-8/56S 34 37.7 30 50 6.6 / 45.0 800-30...+60 30 000 / 0 000 RER 60-8/06S 74 6.3 5 60 6.8 / 46.0 3 50-30...+70 30 000 / 5 000 ACmaxx Axial Fans AC Axial Fans 50 00 50 00 50 AC Radial Fans The air flow and noise level of fans without external housing depend on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 60 x 60 mm. Cover plate 60 x 60 mm with an air-inlet of Ø 00 mm, concentric to the blower wheel. 0, 0,4 0,6 0,8 (in H O) 0 30 60 90 0 50 CFM 50 00 50 00 50 m³/h 50 Hz 60 Hz 3 Accessories

3

Accessories Technology Finger Guards 34 Filter Guards grille 39 Accessories 40 DC Axial Fans DC Radial Fans Everything that you need for your fan. ebm-papst provides an extensive range of accessories for optimum fan operation: From temperature sensing for speedcontrolled fans to finger guards of all types, switched-mode power supply, connecting cable, filter, screens, spacers and assembly parts. In addition to the accessories and assembly parts listed in this catalogue, ebm-papst also supplies numerous special parts for fan operation. The sales experts at ebm-papst will be happy to assist you in your enquiries concerning fan assembly and application. From selection to accessories: Insist on the efficient and reliable service provided by ebm-papst. 33 Accessories AC Radial Fans AC Axial Fans ACmaxx Axial Fans

Finger Guards Finger guards as per EN 94, of rust-proof steel wire for equipment fans. Further finger guards that do not conform to EN 94 can be supplied on request. Fan series Finger Guards 400 LZ9-500 LZ3 600 LZ8-3000 LZ3-8000 LZ3-4 9000 LZ30-4 4000 LZ30-4 LZ9- Fan size 40 x 40 LZ3 Fan size 50 x 50 LZ8- Fan size 60 x 60 50 50 +0,3 30 59 + 4, ±0,5 4, +0,5 LZ3- Fan size 9 x 9 8,5 LZ3-4 Fan size 80 x 80 7,5 LZ30-4 Fan size 9 x 9 04,8 8,5 40 + _ 9 4,3 + 0, + 0,3 4,7 + 7,5 40 + 78, ±0,5 4,3 + 0, + 0,3 4,7 + 04,8 5,5 + 9 _ 4,3 + 0, +0,3 4,7 + 34

Finger Guards Technology Finger guards as per EN 94, of rust-proof steel wire for equipment fans. Further finger guards that do not conform to EN 94 can be supplied on request. DC Axial Fans Fan series Finger Guards 500 LZ5 5600 LZ5 500 LZ35 5900 LZ35 7000 LZ36 600 LZ37 6400 LZ38 Fan series Finger Guards DV 600 LZ37 suction face DV 600 LZ39 blade face DV 6400 LZ38 suction face DV 6400 LZ39 blade face DC Radial Fans LZ5 Fan size 35 x 35 LZ35 Fan size 7 x 7 LZ36 Fan size 50 x 7 AC Axial Fans ACmaxx Axial Fans LZ37 Fan size 7 Ø x 5 LZ38 Fan size 7 Ø x 5 LZ39 Fan size 7 Ø x 5 AC Radial Fans 35 Accessories

ACmaxx Axial Fans Finger Guards Finger guards as per EN 94, of rust-proof steel wire for equipment fans. Fan series Finger Guards AC 4300 H LZ30-4 suction face AC 4300 H LZ30-9 blade face AC 600 NM LZ37 suction face AC 600 NM LZ37- blade face LZ30-9 Fan size 9 x 9 04,8 LZ30-4 Fan size 9 x 9 04,8 04,8 04,8 +0,3 +0,3 4,3 +0, 5,5 4,7 9 - + + 5,5 + 9 _ 4,3 + 0, 4,7 + LZ37- Fan size 7 Ø X 5 LZ37 Fan size 7 Ø x 5 5,5 +0,5 6 ±0,3 Ø58,9,5 4,3 ±0, 6 ±0,5 36

Finger Guards Technology Size 80: galvanised steel wire, chromatised in blue. Size 00 / 08 / 50: steel wire, plastic coated, silver metallic gloss. AC Radial Fans DC Axial Fans Fan series Finger Guards WG 80 6388--4039 Fan series Finger Guards W4S 00 788--4039 DC Radial Fans WG 00 788--4039 WE 08 3539--4039 WG 08 3539--4039 3538--4039 3538--4039 WD 08 3539--4039 WG 50 0948--4039 3538--4039 WE 00 788--4039 6388--4039 Size 80 74 Ø8 Ø 9 788--4039 Size 00 Ø 08 Ø,5 40 3539--4039 Size 08,4 5,5 +0.3 Ø 40 + Ø 7,6 ± Ø 9,4 ACmaxx Axial Fans 4,5 08 5,8 6,4,4 5,4,3 AC Axial Fans 3538--4039 Size 08 0948--4039 Size 50,4 5,5 +0.3 Ø 40 + Ø 3- Ø 5 Ø 70 Ø 78,5 WE 50 0948--4039 95 8,8 6,4,4 6,4 37 Accessories

Finger Guards Finger guards of black, fibreglass reinforced plastik (conform to EN 94). Fan series Finger Guards 8000 LZ3-8000 LZ3-3 3000 LZ3-3000 LZ3-3 9000 LZ30-5 9000 LZ30-6 Fan series Finger Guards 4000 LZ30-5 4000 LZ30-6 500 LZ33-500 LZ33-5900 LZ33-5900 LZ33- Finger Guards Mounting B C D E LZ3- A 80-0,5 7,5 ±0, 7.0 34 LZ3-3 A3 80-0,5 7,5 ±0, 7.0 34 LZ3- A 9,5-0,5 8,5 ±0, 6.5 46 LZ3-3 A3 9,5-0,5 8,5 ±0, 6.5 46 LZ30-5 A 9-0,5 05 ±0, 6.5 50 LZ30-6 A4 9-0,5 05 ±0, 6.5 50 LZ33- A 7-0,5 3,5 ±0, 6.5 50 LZ33- A4 7-0,5 3,5 ±0, 6.5 50 LZ3P Fan size 80 x 80 LZ30P Fan size 9 x 9 38

Fan Filter Guards Technology Fan filter guards for installation on axial fan series for sizes 60 mm, 80 mm, 9 mm, 9 mm, 7 mm. All filter units fit directly onto the existing installation holes on the fans. Fan filter guards consist of 3 parts: the outer grille, the inner fastening plate and the replaceable filter mat. Grille is molded of polycarbonate (PC) with a matt surface. A quick-release on the grille allows for quick and easy filter mat replacement. Wire-mesh fastening plate, black powder coating. Filter mat replacement can be performed on running fans, welded wire-mesh protection. Filter mat made of white, synthetically bonded fibers. DC Axial Fans Protection Filter Fan size A B C D FF60 60 x 60 mm 65 65 3.5 50.0 FF80 80 x 80 mm 85 85 4.0 7.5 FF9 9 x 9 mm 5 05 7.5 8.5 FF9 9 x 9 mm 6 36 8.5 04.8 FF7 ø 7 mm 6 90 9.5 6.0 Replacement filter mats on request. FF9 / FF 9 / FF 7 A C D B DC Radial Fans D FF60 / FF80 Fan size: A 60 x 60 mm 80 x 80 mm C D Fan size: 9 x 9 mm 9 x 9 mm ø 7 mm ACmaxx Axial Fans B D Filter capacity A fan filter guard filters out up to 75% of dust particles up to a size of 5-0 microns and withstands temperatures of up to 00 C. Flame retardant in accordance with BS963. For installed, clean filters, an air flow reduction of 0 30% can be assumed. AC Axial Fans AC Radial Fans 39 Accessories

- 0, Accessories In addition to the accessories and assembly parts listed in this catalogue, ebm-papst also supplies numerous special parts for fan opertaion. The sales experts at ebm-papst will be happy to assist you in your enquiries concerning fan assembly and application. Fan series DC 4400 F 4400 FN 4300 4300 N 4400 400 400 N Fan series AC AC 4300 9900 4000 N 4000 Z LZ40N Screen LZ40- Bracket LZ60 Filter 7,8 +0, 04,8 ± 0, 4,3 +0,5 _ 0;05 08 +0, 88,9 + 0, 3,65 +0, _,5 40

Accessories Technology In addition to the accessories and assembly parts listed in this catalogue, ebm-papst also supplies numerous special parts for fans. The sales experts at ebm-papst will be happy to assist you in your enquiries concerning fan assembly and application. DC Axial Fans Fan series Accessories 8300 LZ 8300 LZ60 8400 N LZ6 3300 LZ 3300 LZ60 3400 N LZ6 9000 LZ0 4000 LZ0 Fan series Accessories 4300 / 8300 LZ 4300 LZ60 500 LZ0 5600 LZ0 500 LZ0 5900 LZ0 7000 LZ0 VARIOFAN LZ370 DC Radial Fans LZ0 LZ LZ60/LZ6 ACmaxx Axial Fans Cable connection with injection molded plug (PVC, black). Strands with core-end sleeves in accordance with DIN 468. For all fan types with flat plugs of.8 / 3.0 x 0.5 mm. Screw clip of stainless steel. For mounting fans with threaded pin 3.5 DIN 7970. Spacer of fibreglass reinforced plastic. For screw mounting over both fan mounting flanges. AC Axial Fans LZ0 LZ370 LZ550 (x) 0,5x45 Required performance data: R5 = 00 K 5% @5 C B-value = 490 % P max = 0,5 W Ø Ø 6,6 0,5 6,9 ±0, ±0,3 (x) Ø 4 50 AC Radial Fans Screw clip of hardened steel. For mounting fans with threaded pin 6-3 UNC and/or 3.5 DIN 7970. Temperature sensor for speed-controlled fan operation. Temperature range 30...50 C. Rubber anti vibration mounts for fans with a hole ø of 4.3 ±0. mm and flange thickness of 3-5.5 mm. For a carrier plate with a hole ø of 6.5 ±0.5 mm and plate thickness of - mm. 4 Accessories