MB6(B,E,V)M Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Modular Indoor Blower 13+ SEER Residential System. Additional MB6EM Features:

Similar documents
B6BMMX Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Air Handler Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner)

B6EMMX Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS

HMG Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Air Handler. 13 SEER Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner)

HMG*T TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Air Handler Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner)

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

B6VMMX Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Air Handler with TXV 18,000-60,000 Btuh (Heat Pump & Air Conditioner)

Q5RD Series Single Packaged Heat Pump, Single Phase

GQ5RD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Heat Pump, Single Phase 13 SEER, R-410A, WARRANTY

VS4BE Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. R-410A High Efficiency Air Conditioner. 14 SEER Residential System 1.

P5RF Series Single Packaged Air Conditioner Single Phase

GP7RD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Air Conditioner, Single Phase WARRANTY

P3RC-12 SEER 2 Ton thru 4 Ton Units Cooling: 23,800 to 48,000 Btuh

DS4BD-KB Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. R-410A High Efficiency Air Conditioner 13 SEER Residential System 1.

Q3RD Series. Single Packaged Heat Pump, Single Phase TECHNICAL SPECIFICATIONS FEATURES AND BENEFITS

GQ6SD Series. Single Packaged Heat Pump 13 SEER, R-410A 2-5 Ton Units TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS WARRANTY

Q6SD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Heat Pump, Single Phase

VT4BF-KA/B Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Ultra High Efficiency Heat Pump 16 SEER Residential System 2-5 Ton Capacity

VS6BF Series 2-4 Ton Capacity. VS4BF Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 5 Ton Capacity

GQ5RD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Heat Pump, Single Phase 13 SEER, R-410A, WARRANTY

GQ3RD Series. Single Packaged Heat Pump, Single Phase TECHNICAL SPECIFICATIONS

GQ4SD Series. Single Packaged Heat Pump 13 SEER TECHNICAL SPECIFICATIONS

JS4BF-K(A,B) Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS

GP5RD Series. Single Packaged Air Conditioner, Single Phase TECHNICAL SPECIFICATIONS

BCE5E PRODUCT SPECIFICATIONS ENHANCED AIR HANDLER APPLICATION INSTALLATION CABINET COILS COMPONENTS WARRANTY

GQ4SD Series. Single Packaged Heat Pump 13 SEER TECHNICAL SPECIFICATIONS FEATURES AND BENEFITS

P7RD-A Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Air Conditioner

P4SD Series Single Packaged Air Conditioning, 13 SEER 3, 4 and 5 Ton Units

VT4BE Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. R-410A High Efficiency Heat Pump 14 SEER Residential System Ton Capacity WARRANTY

FS5BD-KA Series High Efficiency Air Conditioner 13+ SEER Residential System Ton Capacity

Q4SE Series Single Packaged Heat Pump, Single Phase

S5BP Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS

JS5BD-KA Series High Efficiency Air Conditioner 13+ SEER Residential System Ton Capacity

Q7RE Series Single Packaged Heat Pump, Single Phase

JT4BE Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. R-410A High Efficiency Heat Pump 14 SEER Residential System Ton Capacity WARRANTY

JT4BD Series 13 SEER TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 13 SEER 3 Phase Light Commercial R-410A High Efficiency Heat Pump WARRANTY

P7RE Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Air Conditioner

P6SD Series Single Packaged Air Conditioning, 13 SEER - R-410A 3, 4, 5 Ton Units

ET4BE Series R-410A High Efficiency Heat Pump 14 SEER Residential System 1 1/2 5 Ton Capacity

TECHNICAL SPECIFICATIONS

Q6SE Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Heat Pump, Single Phase

P5RF Series Rev "A" Single Packaged Air Conditioner Single Phase

Q7RE Series Single Packaged Heat Pump, Single Phase

Q6SD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 13 SEER, 7.7 HSPF Three Phase, Packaged Heat Pump 3-5 Ton Units WARRANTY

TECHNICAL SPECIFICATIONS

P7RE Series Single Packaged Air Conditioner

FT4BD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. R-410A High Efficiency Heat Pump 13 SEER Residential System 1 1/2 5 Ton Capacity

P7RE Series Single Packaged Air Conditioner

DF6SF Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 4-Stage Heat/2-Stage Cool with Variable Speed Blower ihybrid Package Units with R-410A

AIR HANDLERS UBHN- SERIES AIR HANDLERS AND FAN COIL UNIT PRELIMINARY NOT FOR DISTRIBUTION

BCE3 PRODUCT SPECIFICATIONS STANDARD AIR HANDLER APPLICATION INSTALLATION CABINET COMPONENTS ACCESSORIES WARRANTY

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

ET4BD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. ET4BD Series R-410A High Efficiency Heat Pump WARRANTY

Q4SD Series TECHNICAL SPECIFICATIONS. Single Packaged Heat Pump, Single Phase FEATURES AND BENEFITS

JT4BD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. R-410A High Efficiency Heat Pump 13 SEER Residential System Ton Capacity WARRANTY

JT4BE Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. High Efficiency Heat Pump 14 SEER Residential System 1.

AIR HANDLERS RBHM- SERIES AIR HANDLERS AND FAN COIL UNIT

DT5BD Series High Efficiency Heat Pumps 13+ SEER Residential System Ton Capacity

JS6BD-K Builder's Series

P7RF Series Two-Stage, Single Phase Packaged Air Conditioner

PA95 12 SEER FEATURES 2 THRU 4 TON SINGLE PACKAGE

TECHNICAL SPECIFICATIONS

JT4BD Series 13 SEER TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 13 SEER, 8.0 HSPF 3 Phase Light Commercial High Efficiency, Heat Pump

FSH1BE Series. High Efficiency Heat Pump TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 14 SEER Residential System 1 1/2 5 Ton Capacity

ARUF Series. Multi-Position, Multi-speed Air Handler with PSC Motor 1½ to 5 Tons. Contents. Product Features

GQ4 Series TECHNICAL SPECIFICATIONS. Three Phase Single Packaged Heat Pump (12 SEER) GQ4SC-036C GQ4SC-048C GQ4SC-060C FEATURES AND BENEFITS

PA55 10 SEER FEATURES 2 THRU 5 TON SINGLE PACKAGE AIR CONDITIONER

AIR HANDLERS AIR HANDLERS. RHPN- SERIES 18 SEER featuring Earth-Friendly R-410A Refrigerant. Features

FSH1BF Series. Extra High Efficiency Heat Pump TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 16 SEER Residential System 2-5 Ton Capacity

R6GD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 13 SEER, Three Phase, Packaged Gas/ Electric Units with R-410A 3-5 Ton Units WARRANTY

S3BN Series Split System Air Conditioner 10.3 EER Commercial System 7½ and 10 Ton Capacity R-22 Refrigerant

TECHNICAL SPECIFICATIONS WSH2BF

Air Conditioner Heat Pump (000) BTU 208/ Design Series. Braze 13 SEER

Multi-Position Air Handler. 1½ to 5 Tons. with Energy-Saving Motor

TECHNICAL GUIDE SINGLE PIECE STANDARD ECM AIR HANDLERS. DESCRIPTION

FS5BD Series High Efficiency Air Conditioner 13+ SEER Residential System Ton Capacity

ARUF PRODUCT SPECIFICATIONS AIR HANDLER 1½ TO 5 TONS MULTI-POSITION, THREE-SPEED WITH GALVANIZED CABINET

ES5BD Series High Efficiency Air Conditioner 13+ SEER Residential System Ton Capacity

Q6SD Series 13 SEER, Three Phase, Packaged Heat Pump with R-410A 3-5 Ton Units

KG7S (A and K Series)

TECHNICAL GUIDE SINGLE PIECE STANDARD ECM AIR HANDLERS. DESCRIPTION FEATURE

TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS WARRANTY

ELECTRIC HEAT AIR HANDLERS

Q6SP Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 7.5 and 10 Ton Packaged Electric Heat Pump Units with R-410A 11.

FORM NO. HSC-543 AIR HANDLERS

CFM (L/s) Dimensions. Filter Size in. Ship Wt. H x W x D in. (mm) 1800A 1 1/2 18, (212) 675 (319) 36 1/2 x 20 1/2 x 15

KG7T (C and L Series)

FG7T (A and K Series)

VG7S (D and M Series) High Efficiency, Single Stage Condensing Upflow/Horizontal and Downflow Gas Furnace Models 95.0 AFUE 38, ,000 Btuh Input

AIR HANDLERS RBHK- SERIES HEAT PUMP AIR HANDLERS AND FAN COIL UNIT

P6SD Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Single Packaged Air Conditioning, 13 SEER. 3, 4, 5 Ton Units

TECHNICAL SPECIFICATIONS

BCE5V PRODUCT SPECIFICATIONS ENHANCED AIR HANDLER APPLICATION INSTALLATION CABINET COILS COMPONENTS ACCESSORIES WARRANTY

Rheem High Efficiency Air Handler

TECHNICAL SPECIFICATIONS

CFM (L/s) Dimensions. Filter Size Ship Wt. HxWxDin.(mm) 1800Aǂ 1-1/2 18, (212) 675 (319) 36-1/2 x 20-1/2 x (45) FMA4P (928 x 521 x 381)

TECHNICAL SPECIFICATIONS

R4GA Series TECHNICAL SPECIFICATIONS. Single Packaged Gas/Electric Units. R4GA 10 SEER 2 Ton thru 5 Ton Units FEATURES AND BENEFITS

ELITE SERIES R-410A Ready - Multi-Position

Transcription:

TECHNICAL SPECIFICATIONS MB6(B,E,V)M Series Modular Indoor Blower 13+ SEER Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner) The MB6 Series Modular Indoor Blower offers exceptional flexibility for space restricted applications. Match the MB6 with our C6 cased coils to create upflow, downflow, and horizontal two-piece air handlers. FEATURES and BENEFITS Durable, Attractive Cabinet: Designed using galvanized steel. The door is also galvanized steel, with a polyester urethane finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. The plastic drain pan is corrosion-resistant. Multi-poised: Can be used in horizontal, upflow, downflow and vertical applications. Multi-speed: Gives flexibility of installation. Ease-of-Service: Plug-in wire connections and modularity make the air handler easy to service. Plug-in Heater Kits: Available in 5kw - 20kw Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing. Air Handler Control Board: Controls time-sequencing of heat stages with field-selectable sequence timing. Breaker Accessibility: Breaker accessible from front of unit when heater is applied. No Fasteners on Sides: Smooth surfaces for ease of installation. Cabinet Insulation: 1/2" insulation contributes to quiet operation and prevents cabinet sweating in difficult applications. Additional MB6EM Features: Increased Efficiencies: Air conditioning and heat pump efficiencies up to 15 SEER and 9.0 HSPF. X-13 Energy Efficient ECM Motor: Advanced technology allows for 5 selected airflows to match any application. Quiet Blower Operation: Extra quiet and smooth blower on and off cycles. WARRANTY This product carries a 5-year all parts warranty. When installed with a matched outdoor unit, the air handler will carry the outdoor system warranty. See current warranty document or visit our consumer web site for warranty details. Additional MB6VM Features: Increased Efficiencies: Air conditioning and heat pump efficiencies up to 16 SEER and 9.0 HSPF. ECM Variable Speed Motor: Advanced technology allows for 12 selected cooling airflows and 4 heating airflows to match any application. Quiet Blower Operation: Extra quiet and smooth blower on and off cycles. Constant Airflow: Motor automatically adjusts to different static loads. Field selectable delay profiles: Increase efficiency and comfort. Reduced air stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities.

2

MODEL IDENTIFICATION CODE Modular Indoor Blower Indoor Blower M B 6 B M - 0 8 0 0 K A Cabinet Identifier A = 14 1/4" Width B = 17 1/2" Width C = 21" Width Design Series Motor: B = 3 speed E=Energy Efficient V=Variable Speed Configuration: M = Multipoise Nominal Airflow CFM Electrical Code K = 208/230-1-60 Model Number H6HK- Voltage KW ELECTRICAL DATA Standard Air Handler (A & B size) Energy Efficient & Std Air Handler (C size) Min. Circuit Max. Over- Min. Circuit Max. Over- Ampacity Current Protection Ampacity Current Protection Circuit Circuit Circuit Single Circuit Circuit Circuit Single Circuit Circuit Circuit Single Circuit Circuit Circuit Single A B C Circuit A B C Circuit A B C Circuit A B C Circuit 005H-XX 240 4.8 - - - 30 - - - 30 - - - 34 - - - 40 008H-XX 240 7.5 - - - 45 - - - 50 - - - 48 - - - 50 010H-XX 240 9.6 - - - 55 - - - 60 - - - 59 - - - 60 015H-XX 240 14.4 55 25-80 60 30-90 59 25-83 60 30-90 020H-XX 240 19.2 55 50-105 60 60-125 59 50-109 60 60-125 005H-XX 208 3.6 - - - 27 - - - 30 - - - 30 - - - 40 008H-XX 208 5.6 - - - 39 - - - 40 - - - 42 - - - 50 010H-XX 208 7.2 - - - 48 - - - 50 - - - 52 - - - 60 015H-XX 208 10.8 48 21-70 50 25-80 52 22-73 60 25-80 020H-XX 208 14.4 48 43-92 50 50-100 52 43-95 60 50-100 009Q-XX 240 9.0 - - - 32 - - - 40 - - - 36 - - - 40 015Q-XX 240 14.4 - - - 48 - - - 50 - - - 52 - - - 60 009Q-XX 208 6.8 - - - 29 - - - 30 - - - 32 - - - 40 015Q-XX 208 10.8 - - - 43 - - - 50 - - - 46 - - - 50 Accessory Kit Description Single circuit adaptor for 2 circuit breakers Cabinet Size A B C X X X 913874 ACCESSORIES Order Number 240V Single-Phase Heater Kit Application Nominal KW *800-A Matched Units *1200-A *1200/1600-B *1600-C *2000-C Order Number With Circuit Breakers Without Circuit Breakers 5 X X X X X 904407 904406 8 X X X X X 904409 904408 10 X X X X X 904412 904411 15 n/a X X X X 904414 n/a 20 n/a n/a X X X 904416 n/a 240V Three-Phase Heater Kit Application Matched Units Order Number Nominal KW *800-A *1200-A *1200/1600-B *1600-C *2000-C With Circuit Breakers Without Circuit Breakers 9 X X X X X 904410 n/a 15 n/a X X X X 904415 n/a 3

.75 DIMENSIONS.75.75 12.89 "A" 1.25 Ø 1.125 K.O. 2.87 Ø 1.875 K.O. 2.62 1.73 3.20 1.25 1.06 Ø 1.125 K.O. 1.88 3.57 5.57 1.87 Ø.875 K.O. Ø 1.750 K.O. "H" "W" 22.00 SPECIFICATIONS Model Number MB6- BM-0800-A BM-1200-A BM-1200-B BM-1600-C BM-2000-C EM-1200-A EM-1600-B EM-2000-C VM-1200-A VM-1600-B VM-2000-C Nominal cooling capacity - BTUh 1 24000 36000 36000 48000 60000 36000 48000 60000 36000 48000 60000 Maximum Available Auxilary Heat Nominal Blower Size (Dia. x Width) M o t o r Hp-speeds-type Approximate Shipping Weight, lbs 10 15 20 20 20 15 20 20 15 20 20 10 x 6 10 x 6 10 x 8 10 x 10 11 x 10 10 x 6 11 x 8 11 x 10 10 x 6 11 x 8 11 x 10 1/5-3-PSC 1/2-3-PSC 1/3-3-PSC 1/2-3-PSC 3/4-3-PSC 1/2-X13 1/2-X13 3/4-X13 1/2-VS 1/2-VS 3/4-VS 50 50 60 73 73 50 60 73 50 60 73 Height, H, in. 24-3/4 24-3/4 24-3/4 27-1/2 27-1/2 24-3/4 24-3/4 27-1/2 24-3/4 24-3/4 27-1/2 Width, W, in. 14-1/4 14-1/4 17-1/2 21 21 14-1/4 17-1/2 21 14-1/4 17-1/2 21 Supply Air Outlet Dimension, in. 12-7/8x12-3/4 12-7/8x12-3/4 12-7/8x12-3/4 12-7/8x18-1/4 12-7/ x18-1/4 12-7/ x12-3/4 12-7/8x12-3/4 12-7/8x18-1/4 12-7/8x12-3/4 12-7/8x12-3/4 12-7/8x18-1/4 1 See current AHRI Directory for certified combinations and ratings. 4

MB6BM BLOWER PERFORMANCE data 0800 A-Cabinet 1200 A-Cabinet 1200 B-Cabinet 1600 C-Cabinet 2000 C-Cabinet Low 685 645 605 565 515 465 405 345 Corrected ESP 1 0.07 0.19 0.30 0.42 0.53 0.65 0.76 Med 860 825 780 735 680 625 565 500 Corrected ESP 1 0.11 0.23 0.36 0.48 0.60 0.72 High 1070 1025 975 920 860 800 730 660 Corrected ESP 1 0.14 0.27 0.40 0.53 0.67 Low 850 825 795 755 705 645 580 510 Corrected ESP 1 0.04 0.15 0.27 0.38 0.50 0.62 0.74 Med 1120 1085 1045 995 940 875 800 715 Corrected ESP 1 0.04 0.17 0.29 0.42 0.55 0.68 High 1275 1235 1185 1130 1070 1005 935 860 Corrected ESP 1 0.10 0.23 0.36 0.49 0.63 Low 995 955 910 845 780 705 610 530 Corrected ESP 1 0.08 0.19 0.31 0.42 0.54 0.65 0.76 Med 1335 1290 1235 1175 1100 1015 925 805 Corrected ESP 1 0.10 0.22 0.34 0.46 0.59 0.71 High 1470 1425 1360 1300 1225 1135 1050 920 Corrected ESP 1 0.08 0.22 0.37 0.51 0.65 Low 1035 1005 970 925 875 825 770 710 Corrected ESP 1 0.11 0.22 0.33 0.44 0.54 0.65 0.76 Med 1635 1595 1525 1475 1405 1305 1210 1060 Corrected ESP 1 0.08 0.20 0.32 0.44 0.57 0.69 High 1910 1840 1760 1685 1595 1495 1395 1250 Corrected ESP 1 0.14 0.26 0.39 0.52 0.65 Low 1520 1510 1500 1485 1465 1440 1415 1385 Corrected ESP 1 0.11 0.21 0.31 0.42 0.52 0.62 0.72 Med 1900 1885 1860 1830 1790 1740 1680 1620 Corrected ESP 1 0.06 0.16 0.27 0.37 0.48 0.59 0.70 High 2245 2195 2135 2080 2015 1950 1885 1800 Corrected ESP 1 0.12 0.23 0.34 0.45 0.56 0.67 1 ESP estimate with wet coil and filter Notes: 1) Airflow is shown in CFM, +/- 5%. 2) External static pressure (ESP) is shown in inches w.c. 3) See unit nameplate or installation instructions for maximum recommended external static pressure. 5

MB6EM BLOWER PERFORMANCE data 1200 A-Cabinet Tap 1 840 800 760 715 670 625 580 530 Corrected ESP 1 0.08 0.19 0.30 0.42 0.53 0.64 0.75 Tap 2 880 850 810 770 735 690 660 605 Corrected ESP 1 0.07 0.18 0.29 0.40 0.51 0.62 0.73 Tap 3 975 945 910 870 840 800 765 720 Corrected ESP 1 0.03 0.15 0.26 0.37 0.48 0.59 0.70 Tap 4 1250 1225 1190 1160 1120 1075 1025 970 Corrected ESP 1 0.08 0.20 0.33 0.45 0.58 Tap 5 1380 1340 1295 1245 1190 1130 1070 1000 Corrected ESP 1 0.03 0.16 0.30 0.43 0.56 1600 B-Cabinet Tap 1 1000 860 740 640 560 505 475 460 Corrected ESP 1 0.04 0.18 0.31 0.43 0.54 0.65 0.75 Tap 2 1100 1015 935 865 800 745 690 650 Corrected ESP 1 0.11 0.24 0.36 0.48 0.60 0.71 Tap 3 1320 1280 1235 1190 1140 1085 1030 975 Corrected ESP 1 0.06 0.18 0.30 0.41 0.53 0.65 Tap 4 1505 1465 1425 1390 1350 1300 1250 1200 Corrected ESP 1 0.10 0.21 0.33 0.45 0.57 Tap 5 1625 1590 1550 1520 1480 1440 1390 1345 Corrected ESP 1 0.04 0.15 0.27 0.39 0.51 2000 C-Cabinet Tap 1 1270 1210 1150 1090 1030 970 900 850 Corrected ESP 1 0.11 0.22 0.33 0.44 0.54 0.65 0.76 Tap 2 1500 1450 1400 1355 1305 1255 1200 1160 Corrected ESP 1 0.07 0.18 0.29 0.40 0.50 0.61 0.72 Tap 3 1695 1655 1610 1565 1515 1470 1420 1370 Corrected ESP 1 0.03 0.14 0.25 0.36 0.47 0.58 0.68 Tap 4 1895 1850 1810 1770 1730 1685 1645 1600 Corrected ESP 1 0.10 0.21 0.32 0.43 0.53 0.64 Tap 5 2095 2055 2020 1975 1935 1890 1845 1805 Corrected ESP 1 0.05 0.16 0.27 0.38 0.49 0.60 1 ESP estimate with wet coil and filter Notes: 1) Airflow is shown in CFM, +/- 5%. 2) External static pressure (ESP) is shown in inches w.c. 3) See unit nameplate or installation instructions for maximum recommended external static pressure. 6

AIRFLOW SELECTION FOR VARIABLE SPEED MODELS Basic Airflow Setting A-CABINET B-CABINET C-CABINET Switch Number Nominal Capacity Switch Number Nominal Capacity Switch Number Nominal Capacity CFM 1 2 3 4 1.5 2.0 2.5 3.0 CFM 1 2 3 4 1.5 2.0 2.5 3.0 3.5 4.0 CFM 1 2 3 4 3.0 3.5 4.0 5.0 540 0 0 0 1 720 0 0 0 1 1075 0 0 0 1 600 0 0 0 0 800 0 0 0 0 1135 1 0 0 1 660 0 0 1 0 850 1 0 0 1 1225 0 0 0 0 715 1 0 0 1 880 0 0 1 0 1295 1 0 0 0 790 1 0 0 0 945 1 0 0 0 1380 0 0 1 0 870 1 0 1 0 1040 1 0 1 0 1460 1 0 1 0 915 0 1 0 1 1085 0 1 0 1 1525 0 1 0 1 955 1 1 0 1 1140 1 1 0 1 1625 1 1 0 1 1015 0 1 0 0 1205 0 1 0 0 1740 0 1 0 0 1060 0 1 1 0 1265 1 1 0 0 1860 1 1 0 0 1075 1 1 0 0 1325 0 1 1 0 1960 0 1 1 0 1165 1 1 1 0 1390 1 1 1 0 2090 1 1 1 0 NOTE: 0=OFF, 1=ON 7

GENERAL TERMS OF LIMITED WARRANTY NORDYNE will furnish a replacement for any part of this product which fails in normal use and service within the first five years of installation, in accordance with the terms of the warranty. For complete details of the Limited Warranty, including applicable terms and conditions, see your local installer or contact the NORDYNE warranty department for a copy. 211D-0211 (Replaces 211D-0210) 8000 Phoenix Parkway O'Fallon, MO 63368-3827 Specifications and illustrations subject to change without notice and without incurring obligations. Printed in U.S.A (02/2011)