Precision and power resistors for current measurement Internationally, Isabellenhütte belongs to the leading manufacturers of low -impedance precision resistors. Regardless whether of simple design or heavily-loadable power resistors: our series of products satisfy the highest demands. In 1987 we were the first in the world to produce the SMD-mOhm current-measuring shunt. Up until today we set standards in this technology. Small temperature coefficient, low thermoelectric voltage, high long-term stability, low inductance and high (pulse-)loadability: these are the essential requirements on precision resistors for current measurement. Some of the features can be determined through resistance materials, other factors can be influenced by the design. We distinguish two production technologies: ISA-PLAN (foil resistors in etching technology) and ISA-WELD (electron-beam-welded Cu-Manganin -Cu strips). ISA-PLAN technology: Using etching technology, the resistance elements are manufactured from foils of the precision resistance alloys (Manganin, Zeranin and Isaohm ), that are mounted electrically insulated on a good heat-conducting metal substrate. The planar structures permit low-inductance design forms and very low thermal internal resistances. An optimized current-density distribution avoids the danger of Hot Spots. Besides the conventional two and four-wire current-measuring resistors, presently five SMD product families are available. They offer a variety of possible uses, among others, in the fields automotive, power electronics, motive power engineering, energy measurement and medicine technology. ISA-WELD technology: The resistors of the patented ISA-WELD process consist of solid electron-beam-welded composite material made from copper and one of our resistance alloy. It can be adapted to almost any optiona l form or application using stamping and bending techniques and therefore enables a high degree of design flexibility. The so -called SMD shunts are used in high-current applications of the automobile industry, battery charging technology, motive power engi neering and in electronic energy meters. Both technologies complement one another and enables the industrial production of precision resistors in the value range of 5 µohm to 100 Ohm. The planar structure of the resistors permits a simple realization of the four-wire connection technique. Our precision resistors guarantee: High continuous performance with small design form Extremely low TK-values Very good long-term stability Low-inductance resistance values from 0.005 mohm High pulse loadability A standard delivery of the closest tolerances Thermoelectric voltage against copper largely eliminated Issue 04/2009 Page 1
Products Overview Surface Mount Assembly Surface mount assembly SMx-Series chip resistor for high load in sizes 2817, 2512, 2010 and 1206 Hybrid assembly LMx-Series standard resistors in sizes 2512, 2010, 1206 and 0805 Precision resistors for high current sensing and energy metering VMx-Series Keeping ahead - high precise chip resistors for high load in sizes 2512, 2010 and 1206. Braking resistors Flip-Chip assembly 2- and 4-terminal resistors with high load capacity in size 3925 P.C.B and heatsink assembly Heatsink assembly Composite material BVB/BVE/BVR/BVS/BVT Low-ohmic resistors from composite material Cu-MANGANIN-Cu from 0.2 mo, for high current in sizes 2512, 2725, 3920, 4026 and 5930 SMV/SMR for high pulse and nominal-power very low tc-values in size 4723 Issue 04/2009 Page 2
Surface Mount SMx-Series SMK 0.003 to 0.5 1 to 10 1) 50 1 size 1206 SMK-0 zero ohm < 0.0002 < 0 3800 0.5 size 1206 SMP 0.003 to 1 0.5 to 5 50 2 size 2010 SMS 0.003 to 2 0.5 to 5 50 3 SMS-0 zero ohm < 0.0002 < 0 3800 2 SMT 2-terminal 0.004 to 2 0.5 to 5 50 5 size 2817 SMT-0 2-terminal zero ohm < 0.0002 < 0 3800 2 size 2817 1) 1%, 2% available for values >= 25mOhm Issue 04/2009 Page 3
Surface Mount LMx-Series LMS 2-terminal-resistor 0.001 to 0.5 1 to 5 50 2 LMP 2-terminal-resistor 0.001 to 0.5 1 to 5 50 1 size 2010 LMK 2-terminal-resistor 0.001 to 0.2 5 50 0.5 size 1206 LMI 2-terminal-resistor 0.001 to 0.02 5 50 0.25 size 0805 Surface Mount VMx-Series VMK 0.01 to 0.5 1 to 5 20 1 size 1206 VMP 0.005 to 1 1 to 5 20 2 size 2010 VMS 0.005 to 2 0.5 to 5 20 3 Issue 04/2009 Page 4
VMI 0.01 to 0.3 5 20 0.5 size 0805 VMI-0 zero ohm < 0.0002 < 0 3800 0.25 size 0805 VMK-0 zero ohm < 0.0002 < 0 3800 0.25 size 1206 Surface Mount Flip-Chip Assembly PMA 4-terminal surface mounting 0.002 to 0.5 1 to 5 30 3 size 3925 PMD 2-terminal surface mounting 0.01 to 2 1 to 5 50 2 size 3925 Surface Mount Composite Material BVB/BVE/BVR/BVS/BVT Resistance Value Tolerance TC load capacity [Ω] [%] [ppm/k] [W] BVE 2-terminal size 5930 0.0002 to 0.001 1 to 5 50 7 BVS 2-terminal size 3920 0.0002 to 0.005 1 to 5 50 5 Issue 04/2009 Page 5
BVT 2-terminal 0.0003 to 0.01 1 to 5 50 3 BVB 4-terminal size 2725 0.0005 to 0.005 1 to 5 20 to 50 5 BVR 4-terminal size 4026 0.0002 to 0.003 1 to 5 20 5 BRS 2-terminal size 3812 0.002 to 0.02 1 to 5 50 2 BVH 4-terminal through hole mounting size 3820 0.0003 to 0.002 5 100 3 Surface Mount SMV/SMR SMR size 4723 0.01 to 4.7 0.5 to 5 50 3 SMR-0 2-terminal zero ohm size 4723 < 0.0003 < 0 3800 3 SMV 4-terminal size 4723 0.001 to 1 0.5 to 5 30 3 Issue 04/2009 Page 6
Hybrid Assembly PMB For mounting on DCB substrate 0.001 to 20 1 to 5 30 20 size 3939 PMU 4-terminal-resistor 0.002 to 0.5 1 to 5 30 5 size 3925 PMH 2 or 4-terminal-resistor 0.005 to 0.2 0.5 to 5 30 3 SMH discontinued - please refer to PMH < 0 < 0 < 0 < 0 Precision resistors for high current sensing and energy metering BKW Precision resistor for energy metering 0.0002 to 0.0005 5 20 3 BVM-F Precision resistor for energy metering 0.0001 to 0.0003 5 20 5 BVO Precision resistor for kwh-meters up to 130 A 0.00016 to 0.0005 5 20 5 BVD Precision resistor for energy metering 0.0005 5 20 3 9) Issue 04/2009 Page 7
BAS Precision resistor for energy metering 5.0E-5 to 0.002 5 50 15 9) 0,2 mohm under development Braking Resistors BRQ Braking resistor pulse-power 3kW/s 1 to 200 10 50 300 BRM Braking resistor pulse-power 2kW/s 10 to 100 10 50 200 BRK Braking resistor pulse-power 1kW/s 10 to 100 10 50 100 BEK Braking resistor pulse-power 1kW/s 27 7) 10 50 100 7) other values on request P.C.B and Heatsink Assembly A-H (Kelvin-) 4-terminal-resistor 0.001 to 100 0.1 to 1 10 10 8) Issue 04/2009 Page 8
PBH 2-terminal-resistor TO/247 0.002 to 100 0.5 to 5 50 10 8) PBV 4-terminal resistor 0.0005 to 1 0.5 to 5 30 10 8) PLC low cost alternative 0.0025 to 1 0.5 to 5 50 1 PSB TO-220 0.005 to 1 1 to 5 50 10 8) 8) mounted on heatsink Heatsink Assembly R-Z high load precision-resistor (700 A) 0.005 to 0.01 0.1 to 0.5 3 to 10 500 8) RUG-Z precision resistor 0.001 to 100 0.1 to 0.5 1 to 10 250 8) RTO-A TO-238 / SOT-227B (ISOTOP) 0.5 to 100 1 to 5 50 40 8) RTO-B TO-238 / SOT-227B (ISOTOP) 0.001 to 0.47 1 to 5 50 40 8) 8) mounted on heatsink Issue 04/2009 Page 9
Contact Information ISABELLENHÜTTE Heusler GmbH & Co. KG Eibacher Weg 3-5 D-35683 Dillenburg P. O. Box 14 53 D-35664 Dillenburg Phone +49 27 71/9 34-0 Fax +49 27 71/23030 www.isabellenhuette.de www.isa-asic.de sales.components@isabellenhuette.de Agency in China 中国区代表 北京基创卓越电子有限公司 www.zetron.com.cn Email: zetron@zetron.com.cn 北京 :010-82800090-93, 北京市海淀区知春路 6 号锦秋国际大厦 B 座 1102 室, 邮编 100088 深圳 :0755-83035069, 深圳市福田区振华路 100 号深纺大厦 C 座 7 楼东 F09 室, 邮编 518031 上海 :021-64399427, 上海市徐汇区中山西路 2025 号永升大厦 1420 室, 邮编 200235 成都 :028-85925348, 成都市锦江工业园三色路 209 号 A 区壹栋 405 号, 邮编 610063 青岛 :0532-85886902, 山东省青岛市香港中路 116 号科技大厦 705 室, 邮编 266071 基创卓越 Zetron Excellence 公司是一家专注于汽车电子和工业应用的专业电子零件代理商和技术方案提供商, 总部位于北京, 在深圳, 上海, 广州, 成都和青岛设有销售和支持办事处, 代理产品线包括 ISABELLENHUEUTTE 伊萨拜棱辉特, INFINEON ATV 英飞凌汽车电子, KEC 韩国电子, SENSITRON 桑德斯等, 产品应用涵盖汽车, 工业, 电源, 医疗, 测试仪器等领域, 除了为客户提供高性能的电子零件产品和技术解决方案外, 基创卓越公司在基于分流器 (Shunt) 的直接式电流取样领域拥有多项自主参考设计, 广泛应用于传统能源汽车, 电动汽车 (EV), 混合动力汽车 (HEV), 重型机械, 数控设备, 中央空调, 风电与太阳能, 电源和测试仪器等领域, 成为国内多家相关领域的原始设备制造商 合同制造商和商业客户的合作伙伴 Issue 04/2009 Page 10