Swing - Out Ball Valves High Technology Valve & Fitting
SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (69 bar) to maximum allowable leak rate of 0. SCCM. Hydrostatic shell test is performed at.5 times the working pressure. MATERIALS OF CONSTRUCTION 3 5 6 7 8 9 0 3 5 6 7 Component Material Q TY Body End Cap Ball Ball Seal Flange Seal Stem Stem Seal Upper/Lower Packing Packing Gland Handle Nut Disc Spring Stem Nut Handle Locking Device Stem Nut Lock Flange Bolt Flange Nut ASTM A35GR/CF8M ASTM A35GR/CF8M SS 36 PTFE PTFE SS36 PTFE PTFE STRAIN HARDNED 36
TABLE OF DIMENSIONS SUPERLOK TUBE END CONNECTIONS SIZE / SUPERLOK 30 6 3/8 SUPERLOK SWB SW 8 / SUPERLOK 30 3/ SUPERLOK 303 6 SUPERLOK A S D L A B P 7.6 39.0 7. 8.5 9 75.6 88 67 0 3.0 86.0 53.0. 0.0 FEMALE PIPE THREAD END CONNECTIONS 30 SWB 30 F 303 30 305 SIZE A S D d L A B P N /.5 6N 3/8 39.0 8N / 8.5 N 6N N 3N 3/ -/ 3.0 53.0 70.0 78.0..0 3.7.5 63.5 9 5.0 88 67 0.0 7.5 0 5.0 8.0 38.0 50.0 08.0.5 3 86 3
SOCKET WELD END CONNECTIONS SIZE A / 30 6 3/8 39.0 8 / SWB 30 SW 3/ 3.0 303 6 53.0 30 / 70.0 305 3 78.0 S 8.5..0 3.7 D d L L A B P. 7.6 63.5 0 9.7 88 67 7.3 7.5 0 3. 8.0 3 8.7 08.0 6.0.5 6 3 86 BUTT WELD END CONNECTIONS SWB 30 30 BW 303 30 305 6 8 6 3 SIZE / 3/8 / 3/ / A 39.0 3.0 53.0 70.0 78.0 S 8.5..0 3.7 D d L e A B P.6 6. 6.5.7 7.5 9 5.0 65.5.7 88 67 0.0 76. 7.5 0 5.0 86.0 33.5 38.0 9.0 8.6 50.0 3. 60.5 3 86
SANITARY END CONNECTIONS SWB 30 30 303 SA 30 305 8 6 3 SIZE / 3/ / A 39.0 3.0 53.0 70.0 78.0 S 9 9 L C d D A B P 89.0 9.5 5. 9 0.0 3. 5. 9 88 67.0. 50..0 35.0 50. 0 3 86 6.0 7.6 63.9 OPTIONS ACTUATION We can provide pneumatic actuation package as optional item with following features - Direct mounted actuator - Reducing package devide If require actuator as option, add A to the end of ordering number Ex)SWB305-SA-3-A BODY CAVITY FILLERS Body cavity fillers are designed to fill the cavity of the valve between the body and ball. Cavity fillers minimize problems with trapped fluid in the valve body that could contaminate the process or prevent smooth operation of the valve. If require body cavity filler as option, add BCF to the end of ordering number Ex)SWB305-SA-3-BCF 5
SWB 30 SERIES SPECIFICATION Pressure Rating up to 3000 psig (06 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (69 bar) to maximum allowable leak rate of 0. SCCM. Hydrostatic shell test is performed at.5 times the working pressure. PRESSURE/TEMPERATURE RATING REINFORCED PTFE SEATS (R-PTFE) : STANDARD Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (-8 to 37) 00 (5) 50 (65) 850 (7) 00 (93) 500 (03) 50 () 50 (79.) SWB 30 300 (8) 800 (55.) 350 (76) 560 (38.5) 00 (0) 330 (.7) 50 (3) 00 (6.8) 6 CARBON / GLASS PTEF SEATS : OPTION Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (-8 to 37) 500 (7) 50 (65) 30 (67) 00 (93) 870 (8) SWB 30 50 () 60 () 300 (8) 0 (85.) 350 (76) 860 (59.) 00 (0) 80 (33.0) 50 (3) 00 (6.8) To order option item, add C to the end of ordering number.
PRESSURE/TEMPERATURE RATING PEEK SEATS : OPTION Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (-8 to37) 3000 (06) 50 (65) 0 (66) 00 (93) 870 (8) SWB 30 50 () 770 () 300 (8) 600 (0) 350 (76) 30 (98.5) 00 (0) 60 (86.8) 50 (3) 800 (55.) To order option item, add P to the end of ordering number. VIRGIN PTFE SEATS : OPTION Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (-8 to 37) 500 (03) 50 (65) 500 (03) 00 (93) 500 (03) SWB 30 50 () 50 (79.) 300 (8) 800 (55.) 350 (76) 560 (38.5) 00 (0) 330 (.7) 50 (3) 00 (6.8) To order option item, add V to the end of ordering number. MATERIALS OF CONSTRUCTION Component Valve Body Materials Material / ASTM Specification 3 5 6 7 8 9 Body Ball Support ring Seats Seat spring Flange seal Flange Stem Stem bearing CF8M / A35 SS 36 / A79 SS 36 / A79 Reinforced PTFE Strain Hardned 36 SS / A0 PTFE CF8M / A35 or SS 36 / A79 SS 36 / A79 Alloy X750 0 Lower packing Upper packing Reinforced PTFE 3 5 6 7 8 9 0 Packing support Packing gland Stem spring Packing nut Stem nut lock Handle Locking device Tooth washer Flange bolt Flange nut PEEK SS 36 / A79 Strain Hardned 36 Stainless Steel Q TY 7
TABLE OF DIMENSIONS SUPERLOK TUBE END CONNECTION Orifice in. (mm) Cv End Connection A B C D E F H 0.88 (.8). / Superlok 6 0.8 (7.) 3.8 3/8 Superlok SWB30 6M 8M 0.88 (.8) 0.50 (6.)..5 6mm Superlok 8mm Superlok 7.7 33.0 80.8 0.0 6.75 3.8 57. S 0M 0.8 (7.) 3.8 0mm Superlok 8 0. (0.) 7.5 / Superlok SWB30 0.56 (3.) 3.6 3/ Superlok 6.8.5 03.8 5.90.5..0 M 0. (0.) 7.5 mm Superlok SWB303 6 Superlok 0.875 (.) 0.0 5M 5mm Superlok 79.0 6.0 36.7 68.35 3.0 6.9 9. FEMALE PIPE THREAD END CONNECTIONS Orifice in. (mm) Cv End Connection A B C D E F H N /8 Female NPT SWB30 N 0.8 (7.) 3.8 / Female NPT 7.7 33.0 55. 7.70 6.75 3.8 57. R / Female PT 6N 3/8 Female NPT SWB30 8N 0.56 (3.).0 / Female NPT 6.8.5 68.9 3.5.5..0 F 8R / Female PT N 3/ Female NPT SWB303 6N Female NPT 0.875 (.) 0.0 R 3/ Female PT 79.0 6.0 9.0 6.0 3.0 6.9 9. 6R Female PT 8
TABLE OF DIMENSIONS SOCKET WELD END CONNECTIONS Orifice in. (mm) Cv End Connection d B A B C D E F H K T 0.88 (.8). / Soket Weld 6.50 3.70 7. SWB30 7.7 33.0 55. 7.70 6.75 3.8 57. 6T 0.8 (7.) 3.8 3/8 Soket Weld 9.70 7.0 7.9 8T 0. (0.) 7.5 / Soket Weld.90.30 9.7 SWB30 T 0.56 (3.) 3.6 3/ Soket Weld 9.0 6.70 6.8.5 68.9 3.5.5..0. SW 8P 0.56 (3.) 5.0 / Soket Weld.80 3.0 9.7 6T 0.0 Soket Weld 5.65 33.0 6.0 SWB303 P 0.875 (.) 36.0 3/ Soket Weld 7.0.6 79.0 6.0 9.0 6.00 3.00 6.9 9..7 6P.0 Soket Weld 33.90 5.30 BUTT WELD END CONNECTIONS SWB30 P SWB30 8P SWB303 P SWB303 6P SWB30 P SWB30 8P BW SWB303 P SWB303 6P SWB30 P SWB30 6P SWB30 8P SWB30 P SWB303 6P Orifice in. Schedule Cv End Connection (mm) 0.88 (.8) 0.56 (3.) 0 0.875 (.) 0.88 (.8) 0.56 (3.) 0 0.875 (.) 0.88 (.8) 0.8 (7.) 80 0. (0.) 0.56 (3.) 0.875 (.). / Butt Weld 5.0 / Butt Weld 36.0 3/ Butt Weld 0.0 Butt Weld. / Butt Weld 5.0 / Butt Weld 36.0 3/ Butt Weld 0.0 Butt Weld. / Butt Weld 3.8 3/8 Butt Weld 7.5 / Butt Weld 3.6 3/ Butt Weld 0.0 Butt Weld d 0.0 7.0.5 7.90 9.0 5.80 0.93 6.60 7.70 0.70 3.90 8.80 3.90 B A B C D E F H 3.70.30 7.7 6.8 33.0.5 5. 68.9 6.0 3.5 6.75.5 3.8. 57..0 6.67 9.0 6.00 79.0 6.0 33.0 88.9.5 3.0 6.9 9. 3.70.30 7.7 6.8 33.0.5 5. 68.9 6.0 3.5 6.75.5 3.8. 57..0 6.67 9.0 6.00 79.0 6.0 33.0 88.9.5 3.0 6.9 9. 3.70 7.0.30 6.70 7.7 6.8 33.0.5 5. 68.9 6.0 6.75 3.5.5 3.8. 57..0 33.0 79.0 6.0 88.9.5 3.00 6.9 9. 9
BALL VALVE 0 SERIES SUPERLOK TUBE FITTINGS INSTRUMENTATION, HIGH PRESSURE AND TEMPERATURE, CRYOGENIC SERVICE : 9000 psig @00 F(38 C) : -35 F(-98 C) TO 00 F(68 C) BITE TYPE TUBE FITTINGS (DIN 353) HYDRAULIC, PNEUMATIC, LUBRICATION : 00~630 barg @00 F(38 C) : 800 F(7 C) MULTI-PURPOSE, PNEUMATIC SYSTEM : 000 psig @70 F( C) : -65 F(-5 C) TO 50 F(3 C) BALL VALVE 360 SERIES HIGH PRESSURE INSTRUMENT LINES : 0000 psig @70 F( C) : - F(-30 C) TO 65 F(30 C) PLUG VALVES INSTRUMENT THREAD FITTINGS INSTRUMENTATION, GENERAL SERVICE : 0000 psig @00 F(38 C) : -35 F(-98 C) TO 00 F(68 C) INSTRUMENT AIR LINE, PILOT PLANT : 3000 psig @70 F( C) : -0 F(-3 C) TO 00 F(0 C) MANIFOLD VALVES 0 BALL VALVE 0 SERIES INSTRUMENT AIR LINE, REFINERY PILOT PLANT : 500 psig @70 F( C) : 50 F(0 C) TO 50 F(65 C) PRESSURE & DIFFERENTIAL PRESSURE INSTRUMENTATION : 6000 psig @00 F(38 C) : -65 F(-5 C) TO 50 F(3 C)
TOGGLE VALVES INTEGRAL BONNET NEEDLE VALVES GENERAL SERVICE, INSTRUMENT ISOLATION : 5000 psig @00 F(38 C) : -65 F(-5 C) TO 50 F(3 C) INSTRUMENT LINE : 300 psig @00 F(38 C) : -0 F(-8 C) TO 00 F(93 C) QUICK CONNECTS UNION BONNET NEEDLE VALVES HIGH TEMPERATURE AND PRESSURE : 6000 psig @00 F(38 C) : -65 F(-5 C) TO 00 F(68 C) INSTRUMENT LINE : 3000 psig @70 F( C) : -0 F(-3 C) TO 00 F(0 C) DOUBLE BLOCK & BLEED VALVES CHECK VALVES INSTRUMENT LINES : 3000 psig @70 F( C) : -0 F(-3 C) TO 375 F(9 C) PRIMARY ISOLATION, SAMPLING, CHEMICAL INJECTION : CLASS500 (6000 psig) @00 F(38 C) : -65 F(-5 C) TO 00 F(0 C) WITH PEEK SEAT VACUUM CLAMP SWING-OUT BALL VALVES VACUUM LINES INSTRUMENT AIR LINE, OIL & GAS PRODUCTION : 3000 psig @00 F(38 C) : -0 F(-8 C) TO 50 F(3 C)
Valve Ball Valves Integral Bonnet Needle Valves Union Bonnet Needle Valves Check Valves High Pressure Check Valves High Pressure Needle Valves Plug Valves Manifold Valves Vacuum Clamp Regulators Flexible Hoses Double Block & Bleed Valves Swing-Out Ball Valves Toggle Valves Bleed & Purge Valves Quick Connectors High Pressure Ball Valves Hydraulic Ball Valves Trunnion Ball Valves Rising Plug Valves Relief Valves Cryogenic Needle Valves Cryogenic Ball Valves Fitting Tube Fittings Thread Fittings Forged Fittings Bite Type Tube Fittings (DIN353) Bite Type Tube Fittings (JIS B35) 37 Flared Tube Fittings (SAE J5) O-Ring Face Seal Fittings Hose Connectors & Push-On Hose Fittings Electronics MCPD(Molded Case Power Distributor) -, Bukjeong-dong Yangsan-si Gyeongsangnam-do Korea Tel. 8-55-783-000 Fax. 8-55-783- www.superlok.com superlok@superlok.com 경상남도양산시북정동 - 전화 : 055-783-000 팩스 : 055-783- www.superlok.com superlok@superlok.com BMT CSOV- (06..8)